How to make a pastry turntable with your own hands. How to make a turntable: choice of construction and design, plus simple assembly instructions. Silicone feet
Do-it-yourself cake turntable is needed not only for real confectioners. This is a necessary item for those who cook for pleasure. Housewives who bake mastic-coated cakes cannot do without such a design. The main purpose of a turntable is to facilitate the process of decorating a cake. That is, you do not have to beat around and around the finished product, it will be enough just to decorate a rotating cake. Baking spins around its axis, and you only need to have time to decorate it.
How to make a turntable? To get started, prepare all the necessary materials. You will need two bearings, which are available from auto parts stores.
Please note that there are double, compressed bearings. The second option is preferable because you will have to tinker less.
The turntable also needs a wooden plate. You can stock up on the door from the kitchen set. In addition, you will need hard nails, self-tapping screws, plastic tubes, a metal circle, thin plastic, plywood.
Work process
Scheme Drawing
Making a turntable with your own hands is quite simple. First of all, you will need to draw a quality drawing. After that, we begin to work according to the following scheme. If you have two bearings, and not one pressed one, then we drive an element of a smaller diameter into a larger one using nails. It is necessary to cut out two circles with a diameter of 20 cm in a wooden plate. In one of the circles, a hole is cut in the middle into which the bearing is hammered. In this case, the two parts are twisted and fixed with screws. The bearing is placed in the center.
The do-it-yourself table is equipped with plastic tubes. The tube should connect the upper and lower parts. Consider this point when you make a drawing for the turntable. In this case, the tube must fit exactly into the bearing. The ideal length is 15 cm. Such a tube will not be too short or long, so you do not have to bend down to decorate the product.
The top is made of metal. In order for it to spin, pay special attention to its diameter. On average, the diameter of a metal circle should range from 30 to 40 cm. If you have the opportunity to weld the elements, it will only be wonderful. For those who are deprived of such an opportunity, cold welding was invented, which looks like plasticine. A cake turntable also requires circles cut out of plywood. The rotating part is mounted on the pipe, and the elements are fastened with self-tapping screws.
1
2
3
4
5
6
7
The table can be made of wood:
Cake turntable
Bearing Assembly of rotation
Table top base Rotating part assembled
Cake turntable (bottom view) Cake turntable (side view)
It is probably not a secret for many that the presentation of their work, and even in 3D, is the key to success. The simplest solution in this matter is a rotary presentation table. On it, you can scroll through the work of Netzke, and can be used in the confectionery industry, as an auxiliary device when applying cream.
I need this table to show my homemade products.
And it's very easy to make it.
For the design we need:
- - microwave motor
- - switch;
- - network wire;
- - chipboard or plywood;
- - self-tapping screws;
- - corner.
Base dimensions 250*100 mm. Plywood 18 mm thick.
Pancake table with a diameter of 230 mm.
In the center we drill a hole for the motor, so that the axis fits snugly into the pancake of the table.
My plywood has scuffs, as bu. At first I thought to go through it with sandpaper, which I did, but then I decided to paint it black. When everything was dry, I drilled a hole for the wires.
Further.
We mark the place for the motor. We drill a hole half thinner than the self-tapping screws so that the plywood does not split. We screw the motor.
Now let's install the switch.
In the role of the latter, I have a toggle switch TP 1-2. What was, is applicable. Installed it on an aluminum corner. There was already a hole in the corner, but I finished it with a needle file to the desired one.
We run the wires into a pre-made hole and connect to the toggle switch.
We fasten the corner with self-tapping screws. The corner is applicable to any under your switch.
By motor. I have it for 220 volts. If the microwaves in which motors are installed at 21 volts (I came across such ones). In this case, you need a transformer or you can power it from the microwave board. In the latter case, the design becomes large in size.
Although the motor speed is only about 3 revolutions per minute, I decided to screw the legs.
To certainly exclude the crawling of the table on the surface.
In the role of legs, rubber stoppers from the medicine.
The finished design will look decent. There was an idea to paint the pancake white, but the paint was only water-based and was not suitable for its intended purpose.
ATTENTION! The device is powered by a household network. Take measures to insulate the wires at the point of connection to the switch.
Thank you for your attention!
The design was developed by Mastyrkin.
In the arsenal of every pastry chef there should be a rotary for cakes.
With it, you can greatly facilitate the process of decorating cakes and make it pleasant, comfortable and safe.
If the purchase is not planned in the near future, then an experienced craftsman can assemble it on his own.
If you want the cake to be accessible to you from all sides at the same time, and at the same time you would not have to run around it, be sure to consider having a rotating stand.
What is a turntable for cakes? This product is made up of:
- round work surface;
- – grounds;
- rollers, rubber bands
Thanks to its design, the table easily rotates around its axis, and provides convenient access to the confectionery product. With such a supply, you can create elegant and original decors in the most convenient way and form decorations of any complexity. At the same time, you don’t have to worry at all that your masterpiece will move out, get damaged or fall to the floor.
A turntable for cakes can be either purchased ready-made or made on your own. Homemade design has a lot of advantages. First, you can make a product that will fully meet your requirements and preferences. Secondly, you yourself will be able to create a well-thought-out drawing of the product, select the materials for its manufacture and think over the most optimal dimensions. In addition, a home-made design will come out much cheaper than a purchased one.
materials
A swivel table can be made from any improvised materials:
Each individual option has its own advantages. The tree is environmentally friendly, safe, pleasant to the touch texture. MDF and plywood are easy to process. In addition, this material has a low cost.
But chipboard is inexpensive, and its appearance is attractive, and it is pleasant to work with it.
Advice: in order to save consumables, you can use the door from an old kitchen set to make a countertop.
Instruments
Having decided to make a DIY turntable for cakes, prepare the following: tools and materials:
Important: bearings are double and pressed. The second option is preferable when assembling a rotating cake stand, as they are easier to install.
How to make a turntable?
Making a turntable is quite easy and simple. First you need to make a well-thought-out sketch. On this drawing, indicate the design of the product, its exact dimensions and materials of manufacture. With such a scheme at hand, you can easily assemble a table the first time and without errors.
The manufacturing process of the turntable is carried out in the following sequence:
That's the whole simple process of manufacturing a rotating structure.
Advice: to give the product a decorative appearance, it can be pasted over with thin plastic.
Also, the product can be decorated with a self-adhesive film. It just sticks on and is easy to wash.
A photo
By choosing different materials and getting creative, you can get very different tables.
Turntable
Built a revolving table. Suitable for decorating cakes and for modeling (including dolls - heads). She blinded him, as they say, from what was. But it spins excellently (so far without a cake), at least play in the Field of Miracles or open a casino! :)
What I needed:
1) a hot stand (a round rug with a ball pattern - bought at a sale in the Metro store for 3 UAH), diameter 38 cm;
2) a piece of fiberboard (from it we cut a circle with a diameter of 1 cm less than a hot stand -37 cm);
3) a wheel for furniture on bearings and fastened with a screw and a nut (to make it easier to disassemble) - I bought it on the market for 12 UAH;
4) 4 screws, 4 nuts and 4 washers , so the hat should be flat);
5) 4 self-tapping screws 5-6 cm long;
7) a drill and a drill for self-tapping screws and a large-diameter drill to deepen the hole for sinking the screw head;
8) a block of wood about 60 cm long (I don’t know the exact size, it’s better to choose a specific wheel so that it is a little wider than the distance between the wings of the wheel base (to fit tightly)
9) sandpaper in order to clean the edges of fiberboard;
10) screw and wing nut, size 6, suitable length (cm 5-6);
11) glue "Dragon"
First of all, you need to cut a circle of the desired diameter from the fiberboard. Make 4 holes from the center (attaching the base of the wheel). The edges of the fiberboard need to be sanded and glued with tape.
Then we put the base of the wheel on a piece of timber (we grind it a little so that it fits perfectly), mark and drill a hole for the mount.
We attach the base of the wheel to our countertop.
We attach additional parts from the timber to the wooden bar (so that the table is stable), fasten it to self-tapping screws.
We connect the upper part to the base and fasten it.
On the countertop we apply spiral glue "Dragon" from the edges to the center. We apply our rug - a hot stand and separate it again, wait a couple of minutes for the glue to thicken and again apply it to the countertop. Turn the table top down and, gently pressing, iron the back side of the tabletop with your hand so that the glue takes well.
Everything is ready!
If there is a desire, then the leg of the table can be somehow decorated - painted, decoupled, etc.
The swivel cake stand is an essential tool for pastry chefs: from beginners to real masters. If you want your cake to be accessible from all directions at the same time, but without having to “cut circles around it”, by all means consider having a rotating cake tray. Only he will help to make the cream decoration even. And the process of decorating itself turns into a bewitchingly beautiful action.
The swivel cake stand is an essential tool for pastry chefs: from beginners to real masters.
Such rotating coasters for decorating a cake look great at a large feast, on the windows of cafeterias or pastry shops. If you want to present a masterpiece made by yourself in the most attractive way, it is quite possible to use a rotating cake stand for this.
The product consists of:
- Round work surface;
- Bases in the form of a leg;
- rubber bands;
- rollers.
The design is designed so that the tray (stand) rotates freely around the axis. Thanks to this, access to the cake from all sides becomes convenient. Some variants are made with an inclination, so it is possible that the device bends at different angles. It is these designs that are most convenient when decorating desserts and when demonstrating sweet masterpieces. Such a stand allows you to create original decoration and form any decoration with maximum convenience. Moreover, the confectioner can absolutely not worry that his product will be damaged, move out or even fall.
The tilt stand allows you to create original decorations and shape any decorations with maximum convenience. Types of rotating platforms for cake
In specialized markets, there are many coasters-trays of world famous brands.
Someone wants to have compact products for a dessert bar (Candy bar) when serving sweets. Some people like swivel models with an inclination, others will not be able to use only 2 tiers of the stand.
In specialized markets, there are many coasters-trays of world famous brands. Varieties of design
There are such models, according to the form:
- Oval;
- A circle;
- Square;
- Rectangle.
As well as figured trays for an extravagant demonstration of confectionery creativity.
The turntable is often equipped with complementary accessories: it can be supplied “accompanied” by a spatula, lid, baking dish, pastry syringe, etc.
The rotary cake maker is often equipped with complementary accessories. Materials from which the rotating cake stand is made
Cake racks are:
- steel;
- Glass;
- plastic;
- Ceramic;
- Wooden.
Rotating plastic cake stands are a rather fragile product. This is the most affordable option. Thanks to the last circumstance and the most common. They are presented in a wide range of models, are made with or without a slope. Plastic cake makers usually have a non-slip material, which helps them grip well on the table. This is very convenient.
Plastic cake makers usually have a non-slip material, which helps them grip well on the table. The glass spinning cake tray looks elegant. It is made of tempered high-quality glass, often decorated with an original pattern. It looks neat, spectacular - you can take a photo and serve on a rotating plate. Has a non-porous surface, quickly and easily washes, does not absorb odors.
The glass spinning cake tray looks elegant. Metal structures are heavy, but they are designed for a longer service life. They can withstand weighty cakes, do not deform over time.
Metal structures are heavy, but they are designed for a longer service life. The wooden cake stand is constructed from natural material and looks aesthetically pleasing. Sweet products can be served directly on it. The cost is higher compared to a plastic rotating stand for decorating cakes.
The optimal diameter of wooden structures is at least 34 cm. Such a cake rack is roomy, it is convenient to decorate products from three kilograms (or tiered) on it and make confectionery decor on them. The wide surface makes it possible to place the leveling spatula in a convenient way.
A wooden tray has some advantages:
- He is durable;
- Does not absorb odors and moisture;
- It's easy to care for and easy to clean.
What is important - it "fits" into any interior.
The wooden cake stand is constructed from natural material and looks aesthetically pleasing. The main criteria for choosing
When planning to purchase a kitchen attribute, pay attention to:
- Reliability;
- The quality of the material (it must be hypoallergenic and hygienic);
- Persistence.
Decide on the shape of the baked product, focus on the appropriate diameter. The wider the plate, the more convenient it is for the pastry chef to act. In specialized markets, you can find models with a width of 10 to 40 cm. Many consider the diameter 28 - 30 cm to be optimal.
Don't forget about the stability of the turntable. This is an important selection criterion.
When choosing a rotating cake platform, check if it has markings. This is a great help when decorating: decor elements can be distributed at the required angles, and the edges of the cake can be made as even as possible.
It is worth paying attention to the possibility of disassembling the structure: if the bearing breaks in the rotational mechanism, the non-collapsible stand will have to be thrown out. In such a situation, it does not stop functioning, but simply does not rotate normally. When you run a spatula along the side of the cake, it only twitches occasionally. This prevents the complete design of the product.
When choosing a rotating cake platform, check if it has markings. Often, for most confectioners, the decisive condition for the purchase of such a cake maker is the presence of a transparent coating. It is ideal for serving purposes.
Popular with experienced craftsmen and additional mesh. It often comes as an accessory to a swivel stand. With this accessory it is convenient to cut cakes into beautiful pieces. It ensures accuracy in work: impeccable lines, symmetry, a layer of mastic or glaze after cutting is not smeared.
It is useful to buy a rotating platform on a leg for decorating cakes because today it is the most convenient inventory for decorating and subsequent presentations of sweet products.
The swivel tray is useful for banquet events and as a "showcase" for restaurants, cafes, confectioneries. You can purchase both an inexpensive plastic product and a six-tiered stand.
The swivel tray is useful for banquet events and as a "showcase" for restaurants, cafes, pastry shops. How to make your own spinning cake stand
A turntable cake stand can be bought ready-made or assembled on your own if it is not planned to be purchased in the near future. A homemade device has many advantages:
- You yourself are free to create a drawing of the product, think in detail what dimensions will be the most optimal.
- You will be able to create a cake that will fully meet your desires and preferences.
- A self-made design will cost less than purchased in a store.
You will be able to create a cake that will fully meet your desires and preferences. Materials for manufacturing
A spinning platform can be made from the following improvised materials:
- Plywood;
- Wood;
Each option has its own advantages:
- Plywood and MDF are easy to process;
- It is safe to work with wood, the material is environmentally friendly, the texture is pleasant to the touch;
- Chipboard is inexpensive, has an attractive appearance, and work with it is pleasant.
Chipboard is inexpensive, has an attractive appearance, and work with it is pleasant. Required tools for making
You will need the following:
- Bearings (you can buy them at any auto shop; they are pressed and double; the first option is preferable because they are easy to install);
- self-tapping screws;
- metal circle;
- Nails;
- plastic tubes;
- Lumber (in this case, plywood).
Necessary tools for making. Manufacturing process
Think carefully about the sketch before you start work. Indicate on the drawing the design of the product, what are its exact dimensions, what are you going to manufacture from. With such a scheme at hand, you can assemble a rotating platform easily and without errors.
Subsequence:
- From plywood we cut out a round countertop according to the drawing.
- Next, take the bearing (if not pressed, but double, hammer the smaller one into the larger one with nails).
- In a wooden base, cut 2 circles (d 20 cm).
- Insert the bearing into the circle prepared in advance.
- Using self-tapping screws, twist both parts together, place the bearing in the center.
- The turntable is equipped with plastic pipes. They should connect the top and bottom of the future tortoise. It is better to make a tube at least 15 cm long (to simplify the process of decorating baked products: in this case, you do not need to lean over the culinary masterpiece being made).
- The top of the turntable is made of metal. Ideally, the diameter of the metal surface is 30-40 cm.
- The elements are welded together. If you do not know how to use a welding machine, use cold welding. The rotating part is installed on the pipe, the elements are fastened with self-tapping screws.
Your design is ready.
In order for the rotating cake stand to acquire a decorative appearance, it should be pasted over with thin plastic. You can decorate the product with a self-adhesive film. Sticking it is not difficult, it is easy to clean.
If you approach the issue of making a rotating cake stand creatively, you can get different trays. If you approach the issue of making a rotating cake stand creatively, you can get different trays. The main thing is to clearly align the drawing and select high-quality materials.
Video: Making a do-it-yourself swivel stand