Do-it-yourself planter from a plastic bottle. Flower pot from a plastic bottle Cachepot from 5 liter bottles

If you want to plant your flowers in a beautiful decorative pot, but there is no suitable container for sale, you can make a flowerpot from a plastic bottle. A homemade container can be stylized as bronze, gold or any other metal.

To make an original flower pot, you will need:

• volume 5 l;
• several old newspapers;
• napkins;
• PVA glue;
• dye.

You will need to use scissors, a soldering iron and paint brushes. A glue gun is used to make the base. You can make a pot in a few hours. The finished product is varnished to give the pot a "metallic sheen".

Preparing a plastic container

To make a pot, cut a plastic container in half. Cut off the bottom of the bottle. It will serve as a stand for a flower pot. In the center of the base, you need to cut a hole for the neck of the bottle. Its second half is the main part of the pot.

In the cap of a five-liter bottle, cut several drainage holes to drain water. Without them, the root system of the plant will rot. The pot stand and the main part of it must be fastened with liquid nails or glue using a glue gun.

Preparing flower pot decorations

To decorate the pot, you need to make decorations from newspapers. To do this, roll up a few tubes of newsprint. Then make six "snails" out of the tubes. From five, make flower petals, and use the sixth "snail" as its middle.

When all the decorations are ready, you can start decorating the plastic base of the pot. It is covered with newsprint. Then another layer of PVA is applied to the newspaper to glue the napkins onto the paper. They wrinkle them a little with a brush. Thus, they give the flowerpot a texture. Then the pot is decorated with a flower from newspaper tubes.

Pot painting

When the glue dries, you can paint the pot any color you like. To stylize the pot in bronze, it is painted black with splashes of purple and bronze paint. The flower pot can be varnished to make the flowerpot look stylish.

After the paint has dried, such a pot is filled with a fertile soil mixture and plants are planted in it. In such an original flowerpot, any indoor flower will look great.

Decorating your interior at home or garden with an original planter made of plastic bottles can be very simple! You do not have to make special efforts, besides, this option is also quite economical. The only thing you need here is your imagination, non-standard solutions and an ordinary plastic bottle!

This master class describes in detail the process of making an original planter in the form of a cute owlet.

For this you need:
- plastic bottle;
- scissors;
- marker;
- an owlet template, you can find it on the Internet or draw it yourself;
- acrylic paints;
- brush synthetics or columns;
- a piece of foam sponge;
- rope;
- acrylic paint for facade work (water emulsion),
- clear acrylic lacquer (required).
And so, let's get started...

A plastic bottle can be taken in any shade and size. For the master class, I took a two-liter bottle. Next, I cut the bottle in half. The lower part of the bottle will be the main one, if desired, it can be made higher. Here's what happened.

We put a pre-prepared template inside the planter and transfer its outline to plastic using an ordinary black marker.

It should look like this drawing.

In the manufacture of planters, you can use other animal patterns.

We determine how far below the muzzle of the owlet the rim of the product will go, while marking the place of the cut.

After that, carefully cut off the excess part of the material.

If the cache-pot is hanging, then we leave small loops, if not, we cut off exactly part of the rim. This is what the preparation looks like.

We make holes in the loops for the rope. Since this is a pot, special holes in the bottom are not required.

Before painting, the craft should be covered with a white water-based emulsion so that colored paints “lay down” well on the plastic.

I use a foam sponge for a dense, even coverage, as the surface will be bald when applied with a brush.

I carefully cover the entire outer part of the product, without touching the contour lines of the muzzle.

You will get such a surface, it is a little textured due to the thick consistency of the paint.

The result is something like this.

After applying the layer, the surface of the planter must dry completely. If desired, the procedure can be repeated.

Gradually drawing wings, eyes, a feather, etc.

Experiment with texture.

For the best contrast of some details, you can use a marker.

Here's what happened in the end.

After the painting has dried, we apply acrylic facade varnish to the entire surface of the outer walls of the cache-pot.

Such products have a different effect after drying (matte, silky-matte or gloss), you can choose at your discretion. This procedure is mandatory, because when spraying or watering, water will often get on the pots, and water is the main destroyer of these paints. They should cover the product in several layers, I cover in two. Each next layer will dry longer, consider this nuance!

After the pot cover is completely dry, it's time to thread the rope through the loops.

On the inside, it is necessary to make large knots so that the rope does not slip back.

This is how the craft will look without a flowerpot with flowers.

We insert a small vase with flowers into the pot.

That's all, the original planter made of plastic bottles is ready!

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

The final look of the craft. Photo 3.

A variety of little things and crafts help to emphasize the features of the interior and significantly diversify it. DIY flower pots made from plastic bottles are a prime example of this. The presence of various indoor plants and flowers in the house makes it more comfortable. In addition, plants, in addition to their aesthetic appeal, also contribute to the production of oxygen, purify the air, refreshing the apartment. The decorative component, which is achieved by placing a variety of plants throughout the house, is also very important. One of the factors contributing to the development of an individual style is a flower pot. At the same time, those products that are made independently carry a special brilliance and brightness.

Beautiful flowers and concise indoor plants have excellent external characteristics. However, in most cases, such beauty is planted in faceless and angular pots bought in a store. Unfortunately, the modern market offers us not a very large selection of flower pots. The same products that are available do not differ in special decorative qualities, in addition, they are also not very good in terms of durability.

As a rule, similar products are made of plastic or they are based on ceramics. At the same time, their appearance is quite uniform and does not stand out with special colors. There are, of course, high-quality original products that are distinguished by decorative design and increased durability. But the disadvantage of such products is their high cost, and it is this factor that becomes decisive and makes you think about the appropriateness of the purchase.

Consumers have to either use the faded containers that the modern market provides us with, or experiment and make flower pots with their own hands. Why not try yourself as a creator? After all, this will not only allow you to get colorful and bright products, but also significantly save the family budget.

Making your own flower pots is not that difficult. The main criterion for their creation is the presence of creative abilities and the desire to bring their own fantasy to life. The resulting specimens will significantly stand out against the background of traditional products, outperforming them in almost all criteria - from the decorative component to the strength characteristics.

DIY flower pots made from plastic bottles can be considered one of the most striking examples of such work. It is they that make it possible to obtain wonderful colorful and practical products, as well as significantly save material resources.

Materials and stages of work

Plastic bottles are the raw material that can be found in every household. The modern food industry is focused on the use of plastic containers. Based on this, every month each of us receives at least one empty bottle. At the same time, making a flower pot out of it is a wonderful solution.

Hanging flower pot, created by hand, is a great product that can not only dilute the existing interior, but also give it a twist. Moreover, you can make such a sample in just a few minutes. So, to create such an interior item, you will need the following set of tools and materials:

• plastic bottle 2 l;
• rope, cable or fishing line;
• scissors;
• roulette;
• knife or awl.

First, we take a plastic container and wash it well, since the remnants of the previous liquids can not only worsen the appearance of the decorative element, but also harm the plants that will be placed in it. After that, you need to tighten the cork tightly, put the bottle horizontally and, using scissors, cut a rectangular hole on its upper side into which the plant will be placed.

The next step in the manufacture of an improvised flower pot is the creation of a drainage system. It has a simple structure and consists of only a few holes that need to be made in the bottom of the bottle. To accomplish this task, you can use a knife or an awl. At the same time, the number and diameter of the holes should not violate the integrity of the container, so they are made at its different ends.

The suspended structure also has a simple device. It consists of a rope mechanism that fixes the bottle and prevents it from falling to the floor. To create it, you need to make several additional holes into which the rope will be threaded. At the same time, large knots must be tied at its lower ends - it is on them that the entire structure will be held.

The flower pot is ready. Now you can fill it with earth and plant plants. You can place such objects in any order both on the surface of the wall, and separately. Any of these options can significantly diversify almost any interior and refresh it a little.

Cache-pot from a plastic eggplant

Garden pots made from plastic bottles are able to update the design and make it more individual. However, there are other methods for decorating flower pots. One of them is the use of an impromptu planter designed to hide the appearance of not very attractive pots. Sometimes transplanting a growing flower into a new pot can be problematic or simply impossible. The way out of this situation is a planter, which can also be made from plastic containers. To create it, you will need the following set of tools and materials:

• plastic bottle;
• scissors;
• roulette;
• garden hose;

Making planters from plastic containers is a simple task that can be completed in a short period of time. The procedure for manufacturing such an object begins with the choice of the diameter of the bottle, which will serve as the basis for the planter. It should be based on the size of the plant itself, but, as a rule, it is enough to use a 5-liter eggplant to fully accommodate the flower. Therefore, we will take it as a basis. It is necessary to rinse the plastic container and carefully cut it. In this case, the size of the plant that will be placed in it should be taken into account. In most cases, 2/3 of the bottle is cut off, and the rest is used to make planters.

The difference between such a product and an ordinary pot is that it does not have drainage holes. Therefore, the plastic base itself is ideal for creating planters. However, when cutting plastic, its edge comes out too sharp and not very beautiful. To give it an external aesthetics, you can use an ordinary garden hose, which will hide all the bumps.

The plastic base itself is not very colorful. However, it is easy to process and decorate. To create brightness and visual appeal, you can use paints and paint the surface of the pots as you wish.

Using plastic bottles to create flower pots is an excellent solution that allows you not only to significantly save material resources, but also to get bright and colorful products that will stand out against the background of faceless and angular factory ones.

Probably not one house is complete without indoor plants and flowers. After all, flowers decorate our interior, complementing it with the necessary colors. A flower pot is also considered an important decoration for the interior and therefore it must match it.
Sometimes it happens that we urgently need a flower pot, but it is not at hand. For such cases, a simple and affordable pot is useful. And you can make such a pot from an ordinary plastic bottle and a CD. Surely in any home there is a plastic bottle and a CD. Also, such a pot is perfect for growing seedlings, only it will need to make a cap on top to have a greenhouse effect.

To make a flower pot you will need:
* Plastic bottle.
* CD disc.
* Thermal gun.
* Dye.

How to make a flower pot:
Take a plastic bottle and cut it in half. It is best to first draw on the bottle so that the edges are even and beautiful. The bottle can be cut straight, or you can make the edge wavy, then it will look more interesting. You can cut the bottle with a soldering iron, then the edges will be smoother. If the edges are uneven, they need to be trimmed and made even.

Now we will make flower pots from two halves. One pot will be only from a bottle, and the second from a bottle and a CD.

We drip silicone on the bottle cap and glue it to the disk in the middle.

All pots are ready. You can make small holes along the edge of the pot for beauty. It remains to paint our pots, there are many different spray paints that can imitate stone, marble, etc. Check out your local shops and you are sure to find something for yourself. There are interesting paints with specials. effects, but can also be painted with conventional acrylic or aerosol.

We plant what we need in ready-made pots, they can also be used for seedlings.

Another pot from a plastic bottle

I want to show you another simple and affordable option for making a flower pot from a bottle of shampoo, conditioner, etc.

For work you will need:
* Marker.
* Plastic bottle.
* Stationery knife.
* Earth.
* Flower.

How to make a bottle pot:
First, draw on the bottle what we want to cut out. Then carefully cut and color as you wish. We lay down the earth and plant a flower.

That's it, another flower pot from the bottle is ready.

Copyright © Attention!. Copying text and photos can only be used with the permission of the site administration and an active link to the site. 2019 All rights reserved.

A great idea is to make a simple flower pot out of a plastic bottle. Home decoration with plants has been popular since ancient times. It is good when the house or apartment is spacious - you can be happy to cultivate flowers and greenery. But many of us have to make do with window sill space.

With the advent of products such as pots and flower pots, there are many more opportunities for interesting and original decoration of rooms. Finding a beautiful pot or planter is not an easy task. I would like to add that pots are suitable for both indoor plants and outdoor flowers.

Pots are mostly made from clay and plastic. Less commonly used plastic and ceramics. New clay pots are recommended to be immersed in water for 1 hour before planting flowers. Thus, gases and harmful salts formed during firing come out of the pores. As for the materials from which the pots are made, these are most often wood, ceramics, metal, plastic, rattan, polystone, glass. It is necessary to understand the difference between a flower pot and a planter:

The pot has special holes through which excess moisture comes out. Cache-pots do not have holes. Do not forget that 10-15 minutes after watering, the remaining water must be poured out.

The original planter with muzzles of cats is suitable for the garden and for the windowsill. Make this craft from bottles of different sizes (for example, 2 liters and 0.5 liters).

For work we need:

1. Plastic bottles 2 liters and 0.5 liters.
2. Markers.
3. Acrylic paint or white spray paint.
4. Scissors.

You need to cut off the bottom of the bottle, and then cut off the top so that you get cat ears.

Then we need to paint the resulting blanks with acrylic paint or spray paint.

The product must be dried and applied with markers. We draw a muzzle of a cat. You can use a template. The template is given in two versions: for a bottle of 2 liters and 0.5 liters.

When the product is ready, pour gravel on the bottom for drainage. Then we pour the earth and plant the plant. Such a planter can be made hanging - to do this, make holes on all four sides and thread 4 ropes of the same size into the holes. Tie all the ends together on the hook.

In such a simple way, you can make not only cats, but also other animals.

So our master class is over. Funny crafts from material that is usually thrown away.

Let's try to make an original planter out of ordinary plastic with our own hands. We have a shampoo bottle.

For work you will need:

1. Shampoo bottle.
2. Scissors.
3. Knife for cutting bottles.
4. Colored adhesive tape (can be replaced with tape).
5. Hearts, beads.
6. Clay Moment.
7. Insulating tape.

With a knife, cut 2 holes in a plastic bottle. The hole is a long oval. To avoid sharp cuts, we process the holes with electrical tape. We decorate the neck and side parts with colored ribbon.