German plastic windows. The best choice among PVC profile systems. Technology from West Germany What components are used

In order to understand which profile of plastic windows is better to choose, you need to study a large amount of informational texts, study a lot of professional and amateur reviews and practically conduct your own investigation on this matter. We did it for you and offer to sort out all issues related to German windows together.

What is the best profile of plastic windows?

Inside any profile there is a metal insert, consisting of galvanized steel, air chambers are produced by internal plastic partitions, which ensure heat preservation. The question will be logical: what is the difference between manufacturers who use the same plastic (polyvinyl chloride), and steel remains steel? This suggests the conclusion that the profile of any manufacturer of the same quality should be. Is it so? How then to determine the best of analogues by definition?

Window profile: selection criteria

Producing country . All countries that process the profile indicate its origin. And often in the descriptive part you can see the word "German". Here it is necessary to clarify what exactly is meant by this name, since by this the sellers justify the considerable price of the finished product. A huge part of this profile is produced by Russia using German technology. At the same time, labor and energy resources are used cheaper, which means that the cost of the product should differ from the profile produced in Germany.

Peculiarities quality of thermal insulation chambers is one of the most important criteria. It is generally accepted that the best thermal insulation in windows with a large number of cameras. But it should be borne in mind that too many cameras can lead to such a moment: the coefficient of thermal conductivity may increase due to the plastic of the partitions, which acts as a cooling radiator. In this regard, pay attention to the following important criterion.

Profile width. If you choose a profile for a living room, we recommend that you do not save on this feature. It is quite simple here: the wider the profile, the warmer. Nevertheless, it should be noted that a small-chamber wide profile can easily be deformed due to a lack of stiffeners. It all depends on the room where you plan to put the window.

Number of double-glazed window chambers . We recommend making your choice in favor of two-chamber, even for glazing balconies, and remember, the miser pays twice. In general, the choice of double-glazed windows is the prerogative of a separate article.

Characteristics of the reinforcing steel insert . It happens with a solid or open circuit. In the absence of restrictions on strength, we recommend choosing an open one, it is still warmer.

By the way, in the world market of this industry, the company Windows Velt has proven itself well, which, according to positive customer reviews, occupies a leading position. On their website, you can not only pick up high-quality German windows, but also use the installation service.

As you already understood, it is German profiles that cause the greatest confidence among specialists. They are best suited to our climatic conditions. In this regard, some experts recommend being wary of products made in southern countries, and this, despite the fact that their quality is quite high, but the properties are most likely not well adapted to the climate of our country.

So, having delved a little into the very essence of window production, let's determine the best manufacturers of German windows.

REHAU

The world saw the first window profiles of this brand more than 50 years ago. Window systems of this brand have excellent thermal insulation properties. They are characterized by an incredible tight fit of the frames, which provides good heat and sound insulation. In addition, windows from Rehau are equipped with an anti-burglary system: the glass is impact-resistant, the window cannot be opened from the street, the profile is reinforced. If we mention the appearance of the window systems of this German manufacturer, then aesthetics has no boundaries.

Advantages:

• soundproofing. These window structures meet international standards for sound insulation;
• increased fire resistance. This product is made of flame retardant materials and has a unique self-extinguishing technology;
• thermal insulation. This window profile retains heat well in the room, since it is multi-chamber;
• simple care. Due to the smoothness of the surface and antistatic treatment, dirt does not accumulate on the surface of the windows.

KBE

This company was founded back in 1980 in Berlin. The company is the European market leader for PVC profiles in the field of high-performance extrusion. KBE windows are not afraid of temperature fluctuations (from -65 to +80), high humidity. Profiles are easy to care for, do not suffer from the negative effects of household chemicals or other aggressive environments.

Advantages:

• durability and reliability. These windows are able to please the owner with their service for about 40-50 years. They are resistant to frequent temperature fluctuations, the effects of atmospheric phenomena;
• aesthetics. Structures are able to retain their appearance for a long time and remain snow-white due to the fact that a profile stabilizer is used in their production;
• comfort. If you purchase these windows, you can forget about the sounds that come from the street, because they have good sound insulation;
• economy. KBE windows have a high level of quality and show very high thermal insulation values, which helps to reduce heating costs.

VEKA

This company has been operating on the European market since 1968. Today, the company's factories are located in many countries: Germany, Russia, India, Poland, Singapore, France, Brazil, the USA and Canada, as well as China. This speaks of the demand for Veka windows all over the world. Traditionally good quality, low prices, individual approach, a variety of profile colors, solutions to original glazing issues - all this ensures leading positions among plastic window manufacturers all over the world.

Advantages:

• attractive design. They can be painted in various colors and are distinguished by graceful lines;
• functionality. These profiles have a high level of sound and noise insulation, resistant to negative environmental influences.
• practicality. In care, the design is unpretentious and is able to maintain an attractive appearance for many years.

SCHUCO

The company is one of the European leaders in its industry and today it is represented almost all over the world. The central logic center and headquarters of SchucoInternationalKG is located in Bielefeld (Germany).

The window systems of this company are the embodiment of a technically impeccable solution. The Schuco profile system meets all architectural and construction requirements for durability, modern design, operational efficiency, and resistance to aggressive environments.

Features of window systems:

• Schuco specialists took into account various climatic conditions when developing their recipes;
• due to the height of the glazing bead of 20 mm, the “edge effect” was reduced;
• increased anti-burglary characteristics;
• the use of weldable gray TPE seals, which gives the windows a more interesting look;
• thanks to the installation width of 70 mm and the five-chamber profile design, the windows have increased thermal protection.

They praise the window profiles of the Shuko system, which customers ordered on the website of this company.

TROCAL

This company is associated with rich traditions and constant investments, all key inventions in the field of metal-plastic windows belong to this brand. In 1967, thanks to the fact that the company developed multi-chamber profile systems, it made a real revolution in this area.

Advantages of Trocal windows:

• lead-free raw material formulation;
• modern stylish design;
• unique design features;
• moderate prices for finished products.

Well, we took you on a short tour of the world of metal-plastic windows. We hope that when choosing a window profile manufacturer, you will definitely use our recommendations. Enjoy the shopping!

What plastic windows are the best? Advantages, disadvantages, reviews of popular PVC profiles

We are aware that by rating windows, we are invading the territory of professionals who are very skeptical about the ratings of this product. But "Expert Price" wouldn't be himself if he didn't try to rank everyone.

What profile of plastic windows is better?

To understand the subtle nuances of the assessment, we had to study a considerable amount of informational texts, a huge number of all kinds of amateur and professional reviews, and conduct a small amount of our own research.

The product, about which so many copies have been broken, is in fact the most ordinary plastic stick, but, however, with a complex surface and internal structure. To give strength inside the profile there is a metal insert made of galvanized steel, and internal plastic partitions create air chambers that provide heat retention. Everything. What is there to argue about? Steel, it will remain steel, no matter what they do with it, and the plastic used by all companies is the same - polyvinyl chloride (PVC). It follows that the window profile of any production must be of the same quality. Is it so? And how to choose the best of the same by definition?

Criteria for choosing a profile

Country of origin of the profile

Any company that recycles a window profile indicates its origin. At the same time, it is very often possible to meet the word "German" in the descriptive part. We recommend clarifying what is meant by this word, because. sellers like to justify the high price of a finished window with it. The lion's share of such a profile is produced in Russia using German technology. In this case, relatively cheap energy resources and labor are used, therefore, the cost of the product should differ from the profile produced in Germany.

Number of thermal insulation chambers

Certainly the most important criterion. It is believed that the more chambers, the better the thermal insulation. However, do not forget that an excessively large number of chambers can lead to the fact that the coefficient of thermal conductivity may, on the contrary, increase, due to the plastic of the partitions, which will act as a cooling radiator. Therefore, be sure to pay attention to the following criterion.

Profile width

When choosing a profile for a living room, it is better not to save on this parameter. Everything is simple here, the wider, the warmer. It should only be noted that small-chamber wide profiles can be easily deformed, because. have few stiffeners.

Number of double-glazed window chambers

Reinforcing steel insert

It happens with an open or solid circuit. If there are no restrictions on strength, then we advise you to choose an open one, it is warmer.

ISO 9001 certified

Gives a guarantee of control of the production of window profiles according to the quality management system.

The best PVC window profiles according to "Price Expert"

industry monsters. Leaders of sells.

Why are these plastic windows in our rating: Most popular

VEKA Profile
Naro-Fominsk district, village of Gubtsevo

Photo: www.planetasvet.ru

The profile is produced near Moscow by VEKA Rus. This is the first such enterprise in Russia. In addition, there are branches in Novosibirsk and Khabarovsk. The head office of VEKA AG is located in Sendenhorst, Germany.
The company produces six types of profiles:

• EUROLINE - three chambers, width 58 mm
• PROLINE - four chambers, 70 mm wide
• SOFTLINE - five chambers, width 70 mm
• SWIGLINE - five chambers, width 82 mm
• SOFTLINE 82 - six to seven chambers, 70 mm wide
• ALPHLINE - six chambers, 90 mm wide

The products are certified according to ISO 9001: 2008. The profile of the company "VEKA" has been awarded the German RAL quality mark, which means that the control procedure for the raw materials used and the finished product complies with the control standards.

Moscow region enterprise:

Photo: veka.ua

Pros:

• Stable quality
• Large product line

Minuses:

• Price

Typical window reviewsVEKA:
“The profile itself is good, it showed itself perfectly in winter, pah-pah, but in truth it’s expensive. I still tend to believe that this is an overpayment for the brand ... "
“... the company is quite well-known, it seems to me that in our city most of the advertisements of this particular company. And banners hang along the roads, and they write in the press on the main pages, and they show videos on TV.

REHAU Profile
Gzhel

Photo: dom.vse56.ru

The average price in the Russian Federation of a window with a size of 1470x1420 from a profile 70 mm thick: 9500 rubles

The German company has been manufacturing window profiles in Russia since 2002. Currently, it is the leader in terms of the number of products produced per year among similar Russian enterprises. The plant is equipped with modern equipment and certified according to the quality management system by independent international experts.
Clients are offered the following types of profile:

• GENEO - 6 chambers, width 86 mm
• INTELIO - 6 cameras, 86 mm
• BRILLANT-DESIGN - 5 (6) chambers, width 70 (80mm)
• DELIGHT-DESIGN - 5 chambers, 70 mm
• SIB-DESIGN — 3 + thermoblock (5) chambers, 70 mm
• EURO-DESIGN - 3 chambers, 60 mm
• BLITZ - 3 cameras, 60mm

Note the company's slogan: "Avoiding mistakes is more important than eliminating mistakes" and the culture of production (pictured is a plant near Gzhel).

Photo: www.rehau.com

Pros:

• Quality
• Manufacturer's Warranties
• Large selection of profile models

Minuses:

• Price

Typical reviews about REHAU windows:
“...a little expensive compared to others, but it's worth it”
“The windows are very good, I wanted something cheap, in the end I chose the most expensive one, the quality is really impressive”

Profile KBE (KBE)
Voskresensk

Photo: rudupis.ru

The average price in the Russian Federation of a window with a size of 1470x1420 from a profile 70 mm thick: 7700 rubles

KBE is another German company that has built enterprises in Russia, in particular, plants in Voskresensk and Khabarovsk. No special differences between the KBE profile and competitors' products were found. However, the cost of CBE is somewhat lower. At the same time, the company's profile is ISO certified, and the marketing move for issuing partner certificates is respected. Let me explain: the company issues the “Official Partner Certificate” to the best processors and thus can indirectly influence the quality of finished windows. I must make a reservation - this certificate does not give any guarantees to the consumer.

So, the list of products:

• "Etalon" and "Engin" - 3 cameras, width 58 mm
• "Etalon +" - modification "Etalon" with an additional chamber, mounting width 127 mm
• "KBE_SELECT" - 5 chambers, width 70 mm
• "KBE_Expert" - 5 chambers, width 70 mm
• "KBE_Expert +" - a modification with an installation width of 127 mm
• "KBE_Energiya" - 3 chambers, width 70 mm
• "KBE_88" - 6 chambers, width 88 mm

KBE plant in Voskresensk

Photo: ostekl.ru

Pros:

• Price
• Quality
• Large selection of models

Minuses:

• not found

Typical reviews about KBE windows:

“I am satisfied with KBE windows. My husband and I chose from a variety of companies and opted for Rehau and KBE PVC windows. KBE won by price"
“For me, kbe windows have become the best value for money”

Mid-sized companies with ambitions

Why in our rating: These PVC windows are constantly on the hearing, often fall into the top ten according to professional estimates.

Profile SALAMANDER
Turkheim, Germany

Photo: www.domovladelets.ru

The average price in the Russian Federation of a window with a size of 1470x1420 from a profile 76 mm thick: 26,000 rubles

The products of SALAMANDER Industrie-Produkte GmbH are classified by us as "average" only in terms of "sales level in Russia". Salamander Industrie is a German corporation that has several factories in Europe, including one in Belarus, in Brest. According to the manufacturer, the entire SALAMANDER profile is produced exclusively in Germany, while the BRÜGMANN profile is produced at its other enterprises. The author had the opportunity to personally verify the legitimacy of such a statement when visiting a plant in the Republic of Belarus.

The company manufactures the following profile systems:

• Design 2D - 3 (4) cameras, width 60 mm
• Design 3D - 4 (5) cameras, 76 mm wide
• Streamline - 5 chambers, 76mm wide

Pros:

• External surface quality
• Design
• You can rely on European quality control
• Manufacturer's control of dealers

Minuses:

• Price

Typical reviews about SALAMANDER windows:
"Salamander profiles proven option"
"Salamander is a serious device, no complaints"

Mont Blanc profile
Elektrostal

Photo: vashiokna-dv.ru

The average price in the Russian Federation of a window with a size of 1470x1420 from a profile 70 mm thick: 7800 rubles

The international company STL-Extrusion, which has four factories in the CIS, is engaged in the production of the Mont Blanc profile. Over the thirteen years of production, the MONTBLANC profile has become a fairly well-known brand, and the company has acquired an extensive dealer network. As many as seven product lines are currently available for purchase:

• TERMO 60 - 5 chambers, width 60 mm
• QUADRO 70 - 4 chambers, width 70 mm
• NORD 70 - 5 chambers, width 70 mm
• LOGIC - 3 chambers, width 58 mm
• GRAND 80 - 6 chambers, width 80 mm
• ECO 60 - 3 chambers, width 60 mm
• CITY 120 - 5 chambers, width 120 mm

The profile produced in Mogilev is ISO certified. There is no information about the certification of products of other enterprises of the company.

Pros:

• Quality
• Large selection of profile options
• Democratic price

Minuses:

• Lack of ISO certification at Russian factories

Typical window reviewsMont Blanc:
“A good profile on the Russian market is not uncommon. And cheap and high-quality - this is a rarity ... We are satisfied with everything "
"... they keep warm perfectly"

Kaleva's profile
Moscow

Photo: www.okna-kaleva.ru

The average price in the Russian Federation of a window with a size of 1470x1420 from a profile 70 mm thick: 10,000 rubles

The Kaleva company (Kaleva) is engaged in production of window blocks. The profile is produced independently. Feedback from professionals is more neutral than negative. Users are often captivated by the appearance of the profile - Muscovites did a good job on the design. The company has in its assets two profile systems of a classic look and three design ones:

• Kaleva Standart - 4 chambers, width 70 mm
• Kaleva Vita - 4 chambers, width 70 mm
• Kaleva Design - 4 chambers, 70 mm wide
• Kaleva Design+ - 4(5) chambers, 70 mm wide
• Kaleva Deco - 5(6) chambers, width 70 mm

Pros:

• Appearance
• Full production cycle

Typical reviews about Kaleva windows:
"... in general it will go"
“Overall very satisfied with the windows”

Proplex Profile
Podolsk

Photo: odf.ru

The average price in the Russian Federation of a window with a size of 1470x1420 from a profile 70 mm thick: 8800 rubles

Proplex is a Russian company that is making significant efforts to modernize production and introduce new window systems. A few years ago, it was a small company manufacturing windows from someone else's profile, and now the company has created a full production cycle. Innovative window systems were created together with well-known Austrian developers with extensive experience in designing thermal insulation systems.
Proplex offers the following types of profiles:

PROPLEX-Optima - 3 chambers, 58mm wide
PROPLEX-BALCONY - 3 chambers, width 46 mm
PROPLEX-Comfort - 4 chambers, 70 mm wide
PROPLEX-Premium - 5 chambers, 70 mm wide
PROPLEX-Lux - 5 chambers, 127 mm wide

Pros:

• Price

Minuses:

• Lack of international certification
• The presence in the line of obsolete systems

Typical Proplex window reviews:
“For a window of 110mm x 150mm they gave something about 7 thousand rubles. Acceptable price"
“I listened to the opinion of a specialist and I do not regret it. Everything is great"

Eurowindow manufacturing companies, periodically included in the top 10 ratings

Why in our rating: these plastic windows are worthy of attention.

Deceuninck's profile
Belgium, branch - Protvino

Photo: www.isskur.ru

The average price in the Russian Federation of a window with a size of 1470x1420 from a profile with a thickness of 71 mm: 10600 rubles

The Belgian concern The Deceuninck Group (Dekenink Group) produces its own profile in the Moscow region. The production is not certified, which is strange, because all the European plants of the company have ISO certificates. It is not known whether this is due to unstable quality, or whether the management simply “did not get their hands on it” yet. The profile "collected" the usual ratio of both positive and negative reviews. Product line:

• Forward - 3 chambers, width 60 mm
• Bautek - 3 chambers, width 71 mm
• Favorite - 5 chambers, width 71 mm
• Favorit Space — 6 chambers, width 76 mm
• Eforte - 6 chambers, width 84 mm

Pros:

• Availability of several high-performance systems
• Quality

Minuses:

• High cost of obsolete modifications

Typical Deceuninck window reviews:
"Deceuninck profiles are very reliable, they retain heat very well"
“Windows withstood the test in winter perfectly”

SOK profile
Syzran

Photo: www.okna-modern.ru

Included in the list as a permanent participant in Internet ratings. From the information gleaned from the website of the SOK company (Samara Window Constructions), you can easily find out that the company does not have its own production of window profiles. The “branded” profile is manufactured at the Profine factory (see KBE). And this means that the profile is produced in accordance with international requirements and is ISO certified, which is not bad. But the question immediately arises about the high cost of windows from this profile, the price of which is much higher than KBE windows. The choice of configurations is very small, only two types:

• Brand profile SOK-470 - 4 chambers, width 62 mm
• Brand profile SOK-570 - 5 chambers, width 72 mm

pros:

• quality
• the uniqueness of the location of the cameras

Minuses:

• overpriced finished products
• small selection

Typical reviews about SOK windows:
“SOK is a normal profile, no better and no worse than many”
“I liked the profile, simple and strong”

What plastic windows are still better to put?

And in the end, the main thing is that a careless window manufacturer or a handless installer can turn the best profile into disgusting trash. Therefore, before ordering windows, consult with neighbors, friends or just acquaintances who have already contacted the company you have chosen. Remember that a profile is just a piece of plastic, which, although it is an important component of a window unit, nevertheless, its choice must be justified in combination with factors such as reliable fittings, good double-glazed windows and conscientious craftsmen.

V.S. Smolkov (Contract 33/04-2019) 11-04-2019

Good afternoon! For the glazing of the cottage, I sent requests to several window companies. The offer from "German Windows" turned out to be the most favorable in terms of price-quality ratio. Rehau Delight Design 70 mm windows were chosen, RENOLIT lamination on the outside, with energy-saving 2-chamber double-glazed windows. In the process of clarifying the order, the manager Olga fulfilled my wishes and promptly answered all questions. When measuring the windows, at the installation site, all the characteristics of the windows were once again discussed and some details of the installation were clarified. The contract was signed and payment options agreed. The terms prescribed in the contract for the manufacture of windows were met and the date of delivery and installation was set. On the appointed day, the installers arrived, prepared everything and installed all the windows in one light day. Taking into account the fact that in the house there was only a "carry" of lighting, this was important. Everything was done professionally and with high quality. Thank you!

Kuladina T.N 27-02-2019

We thank the German Windows company for the installation of the balcony block. I would especially like to appreciate the work of the installers - masters for their excellent work, for their respectful attitude towards the customer and manager Bondarev O.A. for your dedication to customer service. Evaluation - excellent, Kuladina T.N.

Irina 20-02-2019

Recently, we applied to the German Windows company for glazing the loggia. We looked at the options, conditions, looked at the photos and decided at the same time to change the frames on the windows. We are very satisfied! The house became lighter, warmer, the window sills were wide. We thank all employees from the bottom of our hearts! We will recommend you to everyone. Later we saw that pensioners were entitled to a discount ... we were a little upset that we were not offered, it seems that the mother shows that the person is elderly. But it seems to be so inexpensive, so we tried not to get upset. And we will be more careful.

Olga 21-01-2019

I am very satisfied with the service in the company "German Windows". All employees: manager, measurer, installers are polite, responsible people. There were no problems with delivery or installation. Everything was done on time. The manager called after the work was completed and asked how the installation went. The level of service is top notch!

Marina 12-11-2018

Good afternoon! I turned to German Windows after reading reviews here. We changed windows in the entire apartment with my parents. To say I'm delighted is an understatement!!! Everything is so competent, well-coordinated and well organized! I applied for the calculation of windows for the whole apartment to different organizations and only in the "German windows" absolutely everything suited me! Starting from perfectly selected double-glazed windows in all respects and ending with a price that is acceptable to me for the quality offered! I received very competent explanations for all my amateurish questions regarding the choice of double-glazed windows and their installation, I convinced my parents that this was the right choice and not in vain! I see such a well-coordinated, clear work of the masters for the first time. For ONE! day we installed 6 windows and a balcony door. My ideas and reviews of my acquaintances, who practically “buried” me on the barricades of dirt, wall debris, dust and stench, were NOT JUSTIFIED!!! After installation, I literally once vacuumed the apartment and washed the floor. AND EVERYTHING!!! Absolutely clean apartment. It's incredible. I express my gratitude to everyone who took part in this: Consultant Irina for understanding, clear organization and discount for volume, competent measurer Sergey, polite dispatchers who always warned about everything in advance, Super-team of window installers who are incredibly well-coordinated, thoughtful and clear did their job (Bravo, guys!), I will recommend ONLY YOU to all my friends!

Vladimir 22-10-2018

I want to express my gratitude to the German Windows company, namely the manager Olga, the driver (unfortunately I didn’t ask for the name), the installers Pavel and Daniel. Thank you very much!!!
Like many, I chose a company for a long time, naturally I wanted to get high-quality windows at an affordable price.
Called measurers from different companies.
After reading the reviews, it was decided to order windows in this company.
17.10. Olga called and reminded me that the windows would be delivered tomorrow. Naturally, there was anxiety somewhere inside, during the renovation of the apartment, I encountered such "sharashkin offices" with rudeness, inaccuracy, and what can I say, kicked out two teams for poor-quality work. So the window was looking forward to.
18.10. The driver called and delivered as agreed. 19.10. installers Pavel and Daniel arrived. They worked carefully, listened to all the wishes, everything was clear, smooth, no "jambs".
I recommend this company to everyone.
The number of the contract, as many write I will not say, is not at hand. The installation took place at Filevsky Boulevard d23.

Konstantin Petrovich 10-07-2018

Clear and high-quality work at all stages! Special thanks to Irina for the time and effort spent on changes in the course of the calculation and explanations (detailed!) On all technical issues. Professional work of installers Pavel and Daniil, exceeding the deadlines (did it faster!) Without loss of quality! Agreement No. 135/06-18. st. Academician Pilyugina, 24/2.

Svetlana 27-06-2018

Viktorov I.I 30-05-2018

Also applied to German Windows Contract: 93/05-2018
Satisfied with the work. I glazed a three-ruble note in an old house.
For the price it was the best offer on rehau than in other companies.
Delivered within the promised time frame, no issues. Satisfied, I recommend.

Sergey 17-04-2018

Turning to the German Windows company in order to change old wooden windows to new plastic ones. The manager of the company, Irina contacted us very quickly and quickly made the calculation. The next day, the measurer Alexander arrived, he explained everything to us about all sorts of nuances associated with manufacturing. We chose Rehau Grazio windows. The total cost of the order was 73,600 rubles. The production took a minimum amount of time only 5 days. And then came the day of installation. Delivery was after 14, the time is not very convenient (the whole day is broken). The next day, masters Pavel and Daniel arrived, they conscientiously and professionally installed windows and a balcony block. At the end of the installation of the first window, the inspector arrived to randomly check the quality of the installation. It took about 9 hours to install, taking into account the fact that all the work was done on a turnkey basis. We express our deep gratitude to the measurer Alexander and the installers for the quality work done, we recommend this company to everyone. City of Moscow Saltykovskaya street 21. Agreement No. 45/03-2018.

German plastic windows are very popular and are considered a model of quality and durability. Many companies use modern technologies, use high-quality materials, thanks to which reliable, durable, sealed structures are obtained. REHAU is one of the leaders in Russia and Europe.

What accessories are used?

Rehau uses the most modern materials and components, such as Euro, Brilliant and Delight-Design profiles. These are high-quality polymers with a high efficiency. They not only perfectly retain heat and isolate noise, but also have an interesting design, thanks to which they fit into the interior of almost any room.

The German Rehau profile appeared on the market in 1958: these were the first polymeric materials that quickly conquered the market, proving their competitiveness. At the moment the company is one of the leaders in Russia and Europe.

In Russia, German profiles are directly used by the company Okna-City. By purchasing products from this manufacturer, you get a guarantee that the profile will be imported, and not manufactured in the Russian Federation using German technology.

Rehau profile Delight-DesignDelight-Design

What are the requirements for installing plastic windows read in our material.

Rehau windows are quite easy to install, so it is not necessary to involve specialists in the work. What are the features of installing these windows is described in our article

Do you think which profile is better, Rehau and Veka? Check out our comparative analysis of these profiles here.

Features of the modern REHAU profile

Window and door profiles produced by the company have a number of unique features for which they are appreciated by most buyers:

• High strength and reliability of the profile, long service life under any load.
• Colors do not become pale over the years, there are no yellow spots on white plastic.
• Materials are completely environmentally friendly, do not emit any odors and harmful substances.
• Thanks to special additives, plastic resists high temperatures well, does not burn or melt when exposed to them.
• The minimum service life of the product is 40 years. The manufacturer gives a guarantee for this.
• Products are certified and meet high quality standards.
• A wide range of profiles allows them to be used in any climatic conditions.

Profile Rehau Brilliant

Features of thermal insulation

Rehau German plastic windows are produced in a large number of options, so the customer has the opportunity to choose a profile that ideally matches his operating conditions, design and size wishes.

Residents of the northern regions can order a profile with a thick double-glazed window, capable of retaining heat indoors even at extremely low temperatures. Windows will immediately relieve possible drafts, discomfort associated with cold.

The reasons why the profile copes well with thermal insulation:

• The natural ability of air to insulate heat is correctly used, since the profile consists of many sealed chambers.
• The seal has several contours, which also provides reliable insulation and prevents drafts.
• Rebate expansion is not required, since a wide profile is initially used if it is planned to install a thick double-glazed window. Due to this, the ability of the material to isolate heat is not lost.

The German REHAU plastic window profile makes it effective at any time of the year in any climatic conditions. Windows will help to make warmer not only the heated room, but also the room where the heating system is passive. As a result, you can save maximum energy by using Rehau products.

Rehau Euro Profile

Some profile models use the principle of a three-chamber package. The sash has a depth of at least 6 cm: this design allows not only to keep the heat in the room, but also allows the window to let in more light. Noise isolation of this profile is also on top. The manufacturer managed to achieve this by using internal and external pre-chambers. Such a window can be used if it faces a noisy street.

REHAU Euro is a profitable solution, as the profile is highly practical, high quality, durable and has an affordable price. If the Delight Design New multi-chamber system is used, the sash depth will be 7 cm: this is one of the most advanced systems that can reliably isolate any noise and cold. The window also has a wide 3.5 cm reinforcement chamber, thanks to which the structure becomes rigid and durable. Such a window has high expanding abilities:

• The heat transfer coefficient of the reinforced profile is at least 1.5 W/m2K.
• The air penetration coefficient is below 0.1.
• The degree of load - C.
• The maximum number of chambers in such a profile is 5, the depth of construction is at least 7 cm: this allows you to make the window effective against any cold and noise.

By installing such windows, you will forever forget about noise, drafts and cold. Heating costs will be reduced. Rehau windows can be installed in a children's room, as they are completely safe for health.

How do REHAU plastic profiles attract consumers?

The German profile for plastic windows is not only practical, but also has attractive external characteristics. Windows have high-quality, pleasant to the touch smooth plastic. Bevels are convenient, they allow you to increase visibility, make the corners smooth, which increases not only the elegance of the profile. But also his safety.

The window closes very tightly. This is ensured by a seal located between the two circuits. Moisture, dust, air cannot pass through them, thanks to which its own microclimate is created in the room, any drafts are reliably eliminated. The seal is located around the entire perimeter of the structure, has a two-petal shape. The touch surface is wide enough, due to which moisture is well isolated.

The window will not let water through even with very heavy rain and wind. Elastic bands for sealing are used from high-quality ethylene propylene rubber, silicone rubber is less commonly used. Such materials serve for a very long time, after mechanical action on it, it easily restores its shape. The elasticity of rubber is maintained even in the conditions of the far north, so Rehau windows are perfect for the northern regions of Russia.

Price windows Rehau Delight-Design from 3750 RUB/m2

Opening and closing doors is easy and convenient. Designs can be different depending on the fittings and the desire of the customer. The manufacturer uses high-quality alloy steel fittings, which makes it reliable and durable.

Rehau profiles have a rich color that does not need to be updated. Plastic is dyed at the time of creation, various dyes are added to the mixture that is still being formed. Most window models are equipped with MACO fittings. This is a professional series, which is highly reliable. Many mechanisms are able to reliably protect against hacking, in addition, the company provides protection for windows from children.

If your apartment is located on the highest or, conversely, the lowest floor, anti-burglar fittings will not be superfluous, since most often criminals get into the premises of the first or last floor, using the window.

Rehau uses durable glass that can withstand high mechanical stress, so you don't have to worry about your window being broken.

By installing REHAU profiles, you guarantee yourself comfort and safety, you can forget about drafts, noise or cold forever.

Premium German brand on the Russian market since 1995. With VEKA you get real German quality from a company with a 48-year history around the world.

• ALL profile systems of the highest class "A"
• ALL are frost-resistant and marked with the letter "M"
• ALL have maximum 4-sided steel reinforcement
• Uniform quality standard regardless of the country of production

The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.

The wider the profile and the greater the installation depth, the higher the thermal insulation.

Profiles ONLY top class "A"

According to the thickness of the inner walls, ALL of our profiles are of the highest class "A" - the thickness of their front wall is at least 3 mm.

• class "A": front wall not less than 3.0 mm
• class "B": front wall not less than 2.5 mm
• class "C": wall thickness is not standardized

Please note that 80-90% of the Russian market are "B" and "C" classes and only 10-20% of "A" class profiles. At the same time, VEKA's product range contains ONLY A-class profiles.

As a matter of principle, we DO NOT use profile systems of classes "B" and "C" (with a front wall width of less than 3.0 mm).

ONLY frost-resistant profiles

According to GOST 30673-99 "PVC profiles for window and door blocks" in terms of resistance to climatic influences, ALL of our profiles are "frost-resistant" - for areas with AVERAGE monthly air temperature in January BELOW minus 20 ° C.

GOST standards for different classes:

• normal version "N": the average temperature in January is minus 20 ° C and above
• frost-resistant version "M": the average temperature in January is lower than minus 20°С

In our assortment ONLY frost-resistant profile systems, marked with the letter "M".

Heat transfer resistance (thermal heat resistance) is the main coefficient of thermal insulation. It is determined by the ratio of the temperature difference outside and inside the room to the heat flow passing through the window. The higher this number, the better the thermal insulation efficiency.

Evolutionary double-glazed windows SmartGlass 2.0

Our multifunctional double-glazed windows work for you both in winter and in summer. In winter, sputtering of silver particles saves up to 90% of the heat energy of heating devices, and in summer a double-glazed window reflects 25% more solar heat than ordinary plastic windows.

• 42% more HEAT in winter (energy saving properties)
• 25% less HEAT in summer (sun protection properties)

All our double-glazed windows contain special energy-efficient glasses. We DO NOT use ordinary glasses even in the most basic configurations.

AirDrive I, II and III climate control systems

Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode. These are NOT external devices (combs or valves), but BUILT-IN furniture ventilation.

Three options:

• AirDrive I: night ventilation (1 mode)
• AirDrive II: discrete multi-stage ventilation (3 modes)
• AirDrive III: discrete multi-stage ventilation (5 modes)

We try not to install combs because of their appearance (only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).

MAX steel profile reinforcement

Reinforcement is a steel frame inside a PVC profile. This is what gives it rigidity. The more steel and stiffness angles, the more reliable the window geometry.

Types of reinforcement:

• Square - 100% reinforcement on 4 sides, 4 stiffeners (maximum)
• U-shaped - 75% reinforcement on 3 sides, 2 stiffeners (normal)
• L-shaped - 50% reinforcement on 2 sides, 1 stiffener (very, very bad!)

All our profiles are reinforced to the MAXIMUM - from 4 sides and always with 4 stiffeners.

VEKA technologists managed to achieve a compromise between the unpretentiousness of a matte texture and spectacular gloss.

Pleasant shine and low sensitivity to external influences are the most noticeable feature of our window systems.

The VEKA profile complies not only with the Russian GOST, but also with the European building standard RAL.