How to make a phone stand from improvised materials. All options for creating a stand for a smartphone from a plastic card How to make a stand for a smartphone

How often, being at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. How to do this, our step-by-step master class will tell.

How to make a do-it-yourself phone stand: options for office and car

Whether at work or in the car, we all need to always be in touch. At the same time, you don’t want to spend a lot of money on expensive coasters, because they can be made from waste and outdated materials.

The simplest option for a phone holder is a card holder. To make it, you need to carefully bend the unnecessary plastic card in two places, as shown in the photo below, preventing it from breaking.

Experience shows that a plastic card holder is very reliable and can withstand even air travel at times of strong turbulence.

To make a phone stand from stationery clips or from binders, as they are also called, you will need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and placed on the table so that the larger clamp rests on its surface.

Similar coasters can be made in five minutes from clothespins.

Paper clips make a great car stand option. To make it, you need to disassemble the large clamp and slightly bend the metal parts, as shown in the photo below.

In order not to damage the surface of the phone, it is recommended to wrap metal fasteners with threads in several layers. We return the holders to their place, additionally fix them with adhesive tape and clerical gum. We fix the clamp on the ventilation shutters. The phone is securely fastened between the metal parts of the binder.

Ordinary office paper, folded in a certain way, can even support the weight of a large smartphone. To make a stand out of paper, you need to measure the dimensions of the phone and adjust the pattern below for them.

Cut out the piece from paper, fold it along the dotted lines and insert the side pieces into the slots. This design is good because it allows you to charge your phone without removing it from the stand.

We study popular options for coasters for home comfort

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of the home. Consider options for such products.

A phone stand made of newspaper tubes will be a wonderful gift and a great decoration for any interior.

To weave such a stand, you will need several pre-painted long newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six blanks parallel to each other at a distance of about 1-1.5 cm and firmly fix them in the machine or in any convenient way. We lay knitting needles or wire in the extreme racks to make it more convenient to form even and neat contours of the product. We begin to braid the base with a working tube using the “rope” technique or chintz weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

Weave a rectangular blank of the required length. We take out the knitting needles or wire. The ends of the stands are neatly trimmed and trimmed. We give the workpiece the necessary curved shape, if necessary, wetting it a little with water.

Similarly, weave the leg of the stand on a smaller number of tubes. We bend the finished leg, install it on the main part and fix its racks between the rows of the stand. Cut off the excess and hide it. We coat the product with glue, if desired, additionally paint and cover with 1-2 layers of varnish. After complete drying, the stand can be used for its intended purpose.

Modular origami is a fairly young, but very popular type of needlework. With it, you can make a lot of unusual and original gizmos, including a phone stand from modules.

To make the stand, you will need double-sided blue and pink paper. We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. For it, you will need 28 blue modules, which must be connected to each other and closed in a ring. We make three more rows in the same way. From the fifth row, we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row we put one pink module in the middle.

In the eighth row we put 6 modules, make a pass, another 10 modules, a pass, 6 modules. The number of pink modules is 2 pieces. In the next row, we put three pink modules on the pink section. We begin to make out the curly edging of the stand, as shown in the photo below.

In the back, we form a pattern in the form of a heart, above which we install a row of blue modules. Gradually narrow the stand until a triangular wedge forms in its back.

Stand of modules is ready!

Video on the topic of the article

We suggest watching the video tutorials below on making other options for phone stands.

The mobile phone has become an indispensable attribute of modern man. And on the road, and at home, and on the desktop, a useful gadget is given the main place, otherwise “suddenly someone calls, but I don’t hear / see.” For convenient placement of a cell phone on the table, coasters were invented. You can buy them in the store, or you can do it yourself from improvised materials. Even the most useless at first glance "unnecessary garbage", like a cardboard package from dairy products or a long-used cover for a disc, will come in handy in the work.

Cardboard stand

The first option is to make a cardboard stand for a mobile phone. This is not necessarily a single piece of material; you can take a used milk bag of a small volume (0.5 ml). It does not require anything to glue: you only need scissors.

The box must be thoroughly washed, crushed and cut off the bottom. Then cut along the folds.

The work will need a central part in the form of two rectangles. Between them is a fold. It must be cut out and folded with the outside inward, clamping the fold with one hand.

Starting from the opposite end, from below, you need to cut out a figure resembling the letter "T". It is narrowed upward, but has a beveled corner.

When the shape is expanded, the bottom edges become where the phone sits. It rests on the central edge. Budget stand is ready!

Stand from the cover for the disc

Surely everyone has a couple of DVDs lying around in the house. One of the unnecessary covers can be turned into a stand for a mobile phone.

To do this, the cover must be cut in half. Then cut off all the holes and rivets so that only an even rectangle with two bent corners at the ends remains.

The plate must be clamped with tweezers or pliers and lowered into boiling water. Thus, the plastic will become soft and pliable.

Holding the plate with pliers or any other tool, it must be bent so that one of the corner-ends does not slightly reach the other. 2-3 cm is enough, and the phone will be located in this space. One of the corners is glued to the surface. It turned out to be an interesting and light stand. The device can be placed on it both vertically and horizontally!

Paper clip stand

A paperclip mobile phone stand is an interesting thing that can be done in 2 minutes. To do this, you need a large massive paper clip, which you just need to unbend correctly!

To begin with, the wire is completely straightened into a line. Then you need to clamp it and bend it again:

1. Bend in the shape of a checkmark - U.
2. Bend both ends at an angle of 90 ° C, starting approximately in the middle.
3. Slightly bend the horses of each end.

Thus, an ordinary paper clip turned into a concise stand. The phone lies on it horizontally.

Toilet paper roll stand

Such good as a sleeve from a used toilet paper roll is enough in every home! Do not rush to throw away the cardboard form - it can be turned into a mobile stand in a matter of minutes.

All that is required is to properly cut off part of the sleeve at an angle. A small piece of cardboard should remain in front to create an emphasis. Such a stand will not be able to accommodate a phone that is too tall, but the standard size will “sit down” perfectly.

If desired, the stand can be decorated: painted, wrapped with cloth or pasted over with paper for gifts. And no one will believe that it was once part of a toilet roll.

Conclusion:

When working with familiar things, it is important to give free rein to imagination: try on, think, experiment. Then mobile phone stands will appear in the house regularly - and always different and interesting!

Today it is impossible to imagine a modern person without a mobile phone, because it is not just a necessary thing, but a stylish accessory. But the mobile phone has one significant drawback - it is often lost. To no longer face the problem of tedious searching, you need to define some permanent place for the device - for example, a stand. You can buy it at the store or make your own.

How to make a simple phone stand

If you decide to create a stand yourself, you should first prepare all the necessary materials - a beautiful fabric, PVA glue, scissors, a marker, a stationery knife, a plastic container that should have a flat shape (you can use a jar from any cosmetic product).

First you need to go through all the empty bottles and jars in the house - choose the one that is the right size for your phone and wash it thoroughly using hot water. Now you need to dry it well to remove all moisture, otherwise your stand will not last long.

We take the phone and apply it to the container, while placing their lower planes at the same level. With the help of a marker, we leave a mark on the bottle - we highlight the height of the future stand, which will be as comfortable as possible for you. On the front of the bottle we make a horizontal line and continue it on the sides.

We turn the bottle and draw its holder on the back. We make it with a sufficiently large hole that will fully correspond to the size and shape of the “plug” - it should pass into it quite easily when charging the phone.

Using a clerical knife or scissors, cut out the stand along the already outlined contour. We take sandpaper (fine) and carefully process all the edges until they become perfectly smooth. It is necessary to go over the rest of the surface of the future stand with sandpaper, as it should acquire a slight roughness in order to better bond with glue.

Next, take a piece of bright fabric (here you can use any material). The main thing is to take such a segment that it is completely enough to wrap the entire stand. Lay the material face down.

We lubricate the front wall of the future stand with sufficiently thick layers of PVA and press it as tightly as possible to the fabric in those places that were determined earlier. Now we glue all the sides of the stand with glue, do not forget about the back, which also needs to be processed. We strongly stretch the fabric so that there are no air bubbles or wrinkles left. In the same way, we wrap the fabric in the bottom area - we must try to fix it well in the shape of the bottle.

As soon as the matter is evenly distributed over the surface of the bottle, and you fix it with glue on all sides of the product, except for the bottom, take scissors and carefully cut off all the excess as close to the edges as possible. Then apply another layer of glue.

According to the shape of the bottom of the bottle, cut out a piece of material separately and glue it from below to gently close all the cuts. We cover the bottom with an additional layer of glue.

At the end, you need to dry the stand well - you need to place it in such a way that the product does not come into contact with anything. We hang the stand on some kind of hook, spoon, pencil, pen, or put it in a glass.

As soon as the product is completely dry, using a clerical knife, carefully cut a hole in the holder. You need to check whether you have fixed the material on the sections well. All protruding edges must be carefully glued.

Phone stand: car model

This stand option is ideal for phones with a wide display and a long body. You can make such a model yourself, besides, it is very convenient to use and is perfect for use in a car. And it only takes a couple of minutes to create it.

So, you need to take a binder (this is a clip that is used to fasten sheets of paper together). You also need to pick up a suction cup, which will become a mounting device. In the place where the suction cup has a hook, we attach a binder to it and our phone stand is ready. You can easily attach it to any convenient place.

Attach a suction cup to the back cover of the phone (do not worry, it will not damage its surface, and there will be no ugly marks left). You can easily place the device not only in a vertical, but also in a horizontal position.

Modular origami: phone stand

You can make a phone stand using the modular origami technique. First you need to collect 24 white and 23 pink modules. The colors of the blanks can be chosen to your taste!

In a circle, we fasten the white modules together in such a way that a circle is formed, while between each pair of whites, you need to insert 1 pink module. As a result, you will get a cone, gradually tapering towards the top.

This design must be continued until the stand reaches the desired height, which must be determined taking into account the size of the phone. The device will be placed in the central part.

DIY phone stand: photo

DIY phone stand: video

A phone stand is a must! It allows you to organize the space in such a way that your mobile phone is always at your fingertips. The stand can be bought or made with your own hands using various techniques. Such products will not only be convenient options for storing your phone, they can be a great gift for your friends or loved ones.

You can make a small phone stand with your own hands from the simplest materials. Our small master class will help you in your work. Handmade items bring warmth and comfort to your home.

Such a funny cat phone stand is easy to make in one evening. To do this, we need fabric from old jeans to finish the cup, denim or any other fabric for the head, paws and tail.

For work you will need:

1. Denim fabric (stripes of different colors).
2. A piece of bright fabric for a scarf.
3. A little synthetic winterizer or cotton wool for paws, tail and head.
4. A glass of cotton swabs.
5. Bottom cardboard.
6. 4 buttons.
7. Pencil, scissors, needle.

Let's get to work:

Take a sheet of paper and freehand draw a pattern. It's pretty simple, even if you can't draw. The head can be done like this: circle the bottom of your cup from under the cotton buds and step back a little from the edge. Get the head of a cat. Cut out the paper pattern. On it we will cut:

• Head (with ears) - 2 parts,
• paw-hand - 4 parts,
• paw-leg - 4 parts,
• tail - 2 parts.

We select materials:

Here is a box you need to take for work, it just fits perfectly in size:

Next, we will make bottoms for our stand. This chopstick cup has a bottom diameter of 8 cm. Yours may be different. For the outer bottom, we cut out a larger circle of cardboard, and for the inner bottom, 0.5 cm less than the bottom of the glass from under the sticks. Cut out a circle with a diameter of 7.5 cm from denim. Sweep along the edge with a thread, insert cardboard and tighten the thread. The second circle is 1.5 cm larger, cut out of denim.

For the inside of the stand, we take a suitable fabric measuring 12 cm (glass height + allowances on each side of 2 cm) * 27 cm (circumference + allowances of 1 cm). We sew the fabric along the short side. We cut the allowances in the lower part of the resulting lining in several places. We put the inner lining into the cup, distribute the notched allowances so that there are no large folds. You can drop a little glue so that the lining does not “walk”.

We turn the top allowance on the outside of the stand. We also fix it by dripping glue in a circle. If there is no glue available, use tape. Then we must draw the belly of the cat. For the top and bottom, trimmings from the legs are well suited. Lay out the strips and fasten them with pins.

Sew all the pieces along the short side. We put on our stand everything that we sewed. On top of the cup we sew the lining and the top of the product with a hidden seam. Then we sew a large bottom. Make sure it doesn't protrude beyond the diameter of the glass. If the bottom is large, cut off the excess cardboard.

We put the cat pattern on the fabric from which you decided to sew it. Cut out a pattern from paper and fasten with pins to the fabric. Cut out, adding a 0.5 cm seam allowance.

Embroider the cat's face the way you like. You can sew beads or buttons instead of eyes.

We sew the paws, tail and head, leaving small gaps in the seams for stuffing with padding polyester. We turn out the details of the head, paws, and tail. We stuff the blanks with synthetic winterizer or cotton wool.

Sew paws, head and tail to the stand. The paws are sewn on at the top and fastened with buttons.

Sew pieces of denim on the tail.

We tie a bright bow around our cat's neck, you can put a sewn mouse or fish in the paws. If you want to give a product, then a souvenir, for example, a smoking pipe.

How to make a cute and original phone stand out of paper, our small master class will tell. The stand can be made from the base: a cardboard ring left over from adhesive tape, an empty round box of chips, salt, coffee, or a cup of cotton buds.

It is impossible to imagine a person who would not have a mobile ...

Now it is almost impossible to imagine a person who would not have such a technical device as a mobile phone.

With the invention of this technique, life has been greatly simplified: if you need to call urgently, the phone is always with you, besides this, it is also much easier to find someone ... In general, it makes no sense to describe all the advantages of a mobile phone, since they are really obvious and do not need advertising.

However, today, when we talk about mobile phones, we most often mean modern smartphones, which, in addition to ordinary calls, are capable of performing a lot of different functions. A modern phone is able to instantly access the Internet and find the necessary information there, receive and send e-mails, take amazing photos and video clips of excellent quality, etc. That is why we most often use the phone not as a means of communication, but also as a multifunctional gadget.

It is for this reason that you always want your phone to be always at hand, in the field of maximum availability. In addition, sometimes you need to view photos or videos on your phone, so you want it to be located in the most convenient way for this.

In order to satisfy all these needs, one must, of course, use mobile phone stand. Today in stores you can find a lot of different shapes of accessories. So, for example, many people probably remember the phone holders in the form of a female hand that were popular a few years ago. Nowadays, coasters have become not only more attractive and elegant, but also functional. They are able to charge the phone's battery, report a call, tilt the phone to view from a variety of angles, etc. So everyone, even the most demanding and demanding consumer, will always be able to purchase a product to their liking.

DIY mobile phone stand

However, if you prefer things made by your own hands, which will be a real exclusive, we will tell you how you can make an attractive one yourself. phone stand. There are many different ways to do this, but we will talk about the simplest, and at the same time unusual.

DIY mobile phone stand - 1

The first option is perfect for a phone with a wide display and a fairly long body, such as an iPhone or any phone from the Samsung line. The stand is incredibly comfortable to use and really functional. It only takes 2 minutes of your time to make it.

1. You need a binder (a kind of clip that is used to fasten papers together), as well as a suction cup, which is used to attach, for example, towel holders. So, attach the binder to the suction cup in the place where it has a hook. Voila! A simple and convenient stand is ready.
2. Attach the suction cup to the back of the phone (don't be afraid, it won't damage it and leave no residue when removed) and position the phone however you like, vertically or horizontally, either way the viewing angle will be perfect.

DIY mobile phone stand - 2

The second option is suitable for truly creative natures. In order to make it, you need to master the art of origami.

1. To make such a stand, you need to make 24 white checkmarks and 23 pink ones. Check marks are made in the same way as cranes.
2. Then the white checkmarks are fastened in a circle so that a kind of circle eventually forms. Insert one pink tick between each pair. Thus, you get a cone tapering upwards.
3. Continue the construction to the desired height. Place a mobile phone in the center, and boldly admire the creation of your own hands!