Water-dispersion acrylic paints vd ak 104. Manufacture of facade panels. Materials for painting facade panels

Produced according to TU 2316-006-90604434-2011.
Purpose: The paint is designed for high-quality painting of all types of wallpaper: paper, non-woven, glass wallpaper inside residential and industrial premises. Also suitable for painting walls and ceilings. It is used for work on concrete, brick, plaster, putty, wood, fiberboard, chipboard and other porous surfaces.

Surface preparation: Wallpaper: Before carrying out work, dust must be removed from the surface. Other surfaces: The surface must be dry, clean and free of grease. To do this, carefully remove dirt, dust, crumbling and fragile old layers of paint. Treat the dried surface with VD-AK 021 primer. Irregularities and cracks should be eliminated with putty, and deeper surface defects should be leveled with putty.

Mode of application: Stir the paint thoroughly before use. Can be diluted with water up to 5% by volume. Apply with a brush, roller, spray, in 1-3 layers at a temperature not lower than +5°C with intermediate drying between layers for 60 minutes. Wash tools, containers, stains with water and household detergents.

Precautionary measures: The paint is fire and explosion proof. In case of contact with eyes, rinse with plenty of water. It is not recommended to mix paint with other types of paints and solvents.

Storage: Store in a tightly closed container at a temperature not lower than +5°C. Transportation at temperatures up to -40°C for no more than 30 days. The paint withstands at least 5 freeze-thaw cycles. The paint should be thawed at room temperature for 24 hours. After thawing, the properties of the paint are completely restored. Shelf life - 12 months.

Package: Bucket 1.3, 3, 7, 15 and 20 kg

Mode of application

To clear a surface of dust, dirt, old fragile coverings, if necessary to degrease. Sand glossy surfaces to a matt finish. Highly absorbent substrates and low-strength surfaces should be treated with wd-ak primers.

Works should be carried out at a temperature not lower than +5ºC and relative air humidity not more than 60%. Before use, mix the paint thoroughly, if necessary, dilute with water by no more than 10% by weight.

Apply to the prepared surface, avoiding dripping, in 1-2 layers with intermediate drying. Under optimal conditions, the drying time is 1 hour, at temperatures below 15°C and high humidity, it can increase up to 24 hours.

Use a brush, nap roller (foam roller not recommended) or airbrush to apply the paint. When working with an airbrush, you should choose a nozzle diameter that matches the pressure.

Approximate consumption of paint for a single-layer coating is from 110 to 130 g/m 2 . The practical consumption depends on the color of the paint, the texture of the surface to be painted, the method of painting used, and the application conditions.

Compound

It is a suspension of persistent pigments, fillers in an aqueous dispersion of synthetic polymers with the addition of various excipients.

Transport and storage

The material should be stored in a tightly closed container, in a dry and cool place. at temperatures from +1°С to + 40°С. Storage and transportation at temperatures up to -25°C is allowed, but not more than 2 weeks. Defrost at room temperature without heating.

Precautionary measures

The material is fire-explosion-safe and non-toxic. It is not recommended to mix with other types of paints and varnishes and solvents. When working, use personal protective equipment.

In case of contact with skin and eyes, rinse with plenty of water!

Characteristics

The paint is excellent for exterior and interior work on surfaces that are constantly exposed to water.

It is used for carrying out various finishing and restoration works of objects of industrial, civil and individual construction. It can be used for socle elements of buildings, roofs, floors, walls and ceilings with high humidity.

Most often, it plays the role of a finishing finishing material on a prepared surface made of various materials: wood, concrete, drywall or brick, as well as various materials based on them.

Price 155 rubles. per 1 kg

kg Not available

Own production fiber-cement and chrysotile-cement (asbestos-cement) slabs of one-colored and textured.

We are manufacturers of plain-colored and textured fiber cement boards. for exterior and interior decoration. The technological level of production of fiber cement boards is very high. The plate is produced of European quality, the guarantee of plates is up to 15 years.

Production of fiber cement facade boards

Making and cutting fiber cement boards, laboratory research and strict control over all production processes allows us to produce a plate of very high quality and guaranteed to have a long service life.

We give a guarantee for the coating of facade panels up to 15 years.

The facade slab has excellent physical and technical characteristics, fire resistance, resistance to aggressive environments, has high compressive, tensile and bending strength.

Slab weight not much large, and standard sizes are optimal for use in modern construction. It is also possible to produce plates of non-standard size, at the request of customers.

Advantages of front panels.

If we compare fiber cement boards with the currently popular facing porcelain stoneware, fiber cement has a number of advantages: the size range is not limited, the weight is less, the thickness is less, the color range is not limited, the plates can be painted in any color and apply a textured coating. Also, fiber cement boards are much easier to cut and drill, the ends of the boards can always be painted if necessary.

Very important point: when installing facade panels, decorative strips between seams are used, which are painted in the color of the slab and make the facade very beautiful and aesthetic, and also protect the outer wall of the building from precipitation. Fiber cement boards are very durable and easy to use.

We produce painted fiber-cement and chrysotile-cement slabs, lathing for hinged ventilated facades and complete building objects with building cladding materials.

Facade slabs are rectangular sheets with a smooth-colored front surface. The side ends are painted, a layer of primer is applied to the back, reverse side. The basis of such panels is a fiber cement pressed autoclaved sheet 8 mm, 6 mm or 10 mm thick, as well as asbestos-cement (chrysotile cement) sheets 8 mm thick.

The main overall dimensions of the sheet:

Length: 1200 mm., 3000 mm., 3600 mm.; Width: 1500 mm., 1570 mm. As agreed with the customer plate can be made in different sizes.

Physical and mechanical properties of facade slabs:

• Bending strength, not less than 21.5 MPa;
• Reference weight of 1 m2 of painted board - 14 kg.
• Water absorption, no more than 20%;
• Flammability group NG;
• Frost resistance, not less than 150 cycles (residual strength not less than 90%);
• Impact strength, not less than 2 kJ/m2;
• Density, not less than 1.5 g/cm3;

Materials for painting facade panels

We also have our own production for the production of materials for painting fiber cement boards.. For high-quality painting of products, the company's technologists, together with dispersion manufacturers and laboratory staff, have developed materials that have exceptional consumer properties:

◊ Primer VD-AK-001 CEMENTING for highly alkaline bases;

◊ Paint VD-AK-104 AMETHYST for coloring fiber cement sheets.

For the production of these materials, a special acrylic dispersion is used, developed for coloring highly alkaline substrates. Special wax-based additives give the paint coating additional properties - no sticking, surface hydrophobicity, giving a "lotus effect", high mechanical strength of the coating.

Unique equipment allows to ensure the stability and level of product quality. The company has developed, implemented and successfully operates its own product quality system. Multi-stage control ensures strict observance of materials manufacturing technologies at all stages.

Technical description of the primer, which is used for the manufacture of fiber cement boards.

Soil concentrate VD-AK-001– water-dispersion acrylic for outdoor and indoor use

This is a primer concentrate. for outdoor and indoor work. It is a low-viscosity solution based on a polyacrylic dispersion with the inclusion of various functional additives. Designed specifically for use when carrying out finishing work outside and inside buildings and premises. Available in concentrated form. Contains a high-quality antiseptic, has biocidal and fungicidal properties.

Used for pretreatment various kinds of mineral bases such as: concrete, cement, gypsum and cement-lime plasters, gypsum boards, gypsum fiber and gypsum-chipboards, cellular concrete, cement surfaces reinforced with synthetic fibers.

For waterproofing building structures or hardening loose surfaces. The primer is designed to strengthen loose surface layers by impregnating it, binding salts formed in the base-substrate, while the pores remain open, smoothing strongly and unevenly absorbent bases, reducing absorbency and increasing adhesion of preparatory and finishing layers.

Strengthens the surface, improves laying and performance properties finishing materials applied to it. Allows you to optimize the cost of finishing work.

Soil specifications:

• Composition: Aqueous dispersion of synthetic polymers.
• Film Appearance: Homogeneous
• Mass fraction of non-volatile substances, %, not less than 5
• Nominal viscosity according to VZ-246(4), at a temperature of (20+2) ºС, s, not less than 11
• Drying time up to degree 3 at a temperature of (20+2) ºС, hour, no more than 1
• Adhesion, points, no more than 2

Technical description of the paint used for painting fiber cement boards

Paint VD-AK-104 AMETHYST water-dispersion acrylic for external and internal finishing works.

AMETHYST paint is a suspension of persistent pigments, fillers in an aqueous dispersion of synthetic polymers with the addition of various auxiliary substances and is intended for exterior and interior finishing work.

Virtually odorless. It is easy to apply, dries quickly and does not give off harmful fumes. Super white or tinted in any tone as agreed with the Customer. Can be used for self-tinting as Base A.

After drying, it forms a semi-matt, polymeric film on the surface to be painted, which has excellent weather and light resistance.

Application area:

Finishing and repair of industrial facilities, civil and individual construction. Specially formulated for painting highly alkaline substrates such as asbestos-cement and fiber-cement sheets, slates, new cement-based plasters, building plinths, etc. The paintwork is distinguished by high physical and mechanical properties and durability.

Technical characteristics of facade paint:

• Appearance: Homogeneous, matte
• Density, kg/m2 — not less than 1.55
• Mass fraction of non-volatile substances, % — not less than 50
• Dried film hiding power, g/m 2 — no more than 150
• Nominal viscosity according to VZ-246(4), at a temperature of (20+2) ºС, s — not less than 20
• Drying time up to degree 3 at a temperature of (20 + 2) ºС, hour - no more than 1
• Film resistance to static water (20+2) ºС, hour — not less than 24
• Adhesion, points - no more than 2
• The degree of grinding, microns - no more than 70
• Conditional light fastness, h — not less than 24