German firms manufacturers of plastic windows. German plastic windows. The best choice among PVC profile systems. Features of window systems

V.S. Smolkov (Contract 33/04-2019) 11-04-2019

Good afternoon! For the glazing of the cottage, I sent requests to several window companies. The offer from "German Windows" turned out to be the most favorable in terms of price-quality ratio. Rehau Delight Design 70 mm windows were chosen, RENOLIT lamination on the outside, with energy-saving 2-chamber double-glazed windows. In the process of clarifying the order, the manager Olga fulfilled my wishes and promptly answered all questions. When measuring the windows, at the installation site, all the characteristics of the windows were once again discussed and some details of the installation were clarified. The contract was signed and payment options agreed. The terms prescribed in the contract for the manufacture of windows were met and the date of delivery and installation was set. On the appointed day, the installers arrived, prepared everything and installed all the windows in one light day. Taking into account the fact that in the house there was only a "carry" of lighting, this was important. Everything was done professionally and with high quality. Thanks!

Kuladina T.N 27-02-2019

We thank the German Windows company for the installation of the balcony block. I would especially like to appreciate the work of the installers - masters for their excellent work, for their respectful attitude towards the customer and manager Bondarev O.A. for your dedication to customer service. Evaluation - excellent, Kuladina T.N.

Irina 20-02-2019

Recently, we applied to the German Windows company for glazing the loggia. We looked at the options, conditions, looked at the photos and decided at the same time to change the frames on the windows. We are very satisfied! The house became lighter, warmer, the window sills were wide. We thank all employees from the bottom of our hearts! We will recommend you to everyone. Later they saw that pensioners were entitled to a discount ... they were a little upset that they didn’t offer us, it seems like their mother shows that the person is elderly. But it seems to be so inexpensive, so we tried not to get upset. And we will be more careful.

Olga 21-01-2019

I am very satisfied with the service in the company "German Windows". All employees: manager, measurer, installers are polite, responsible people. There were no problems with delivery or installation. Everything was done on time. The manager called after the work was completed and asked how the installation went. The level of service is top notch!

Marina 12-11-2018

Good afternoon! I turned to German Windows after reading reviews here. We changed windows in the entire apartment with my parents. To say I'm delighted is an understatement!!! Everything is so competent, well-coordinated and well organized! I applied for the calculation of windows for the whole apartment to different organizations and only in the "German windows" absolutely everything suited me! Starting from perfectly selected double-glazed windows in all respects and ending with a price that is acceptable to me for the quality offered! I received very competent explanations for all my amateurish questions about the choice of double-glazed windows and their installation, I convinced my parents that this was the right choice and not in vain! I see such a well-coordinated, clear work of the masters for the first time. For ONE! day we installed 6 windows and a balcony door. My ideas and reviews of my acquaintances, who have already practically "buried" me on the barricades of dirt, wall fragments, dust and stench, were NOT JUSTIFIED!!! After installation, I literally once vacuumed the apartment and washed the floor. AND EVERYTHING!!! Absolutely clean apartment. It's incredible. I express my gratitude to everyone who took part in this: Consultant Irina for understanding, clear organization and discount for volume, competent measurer Sergey, polite dispatchers who always warned about everything in advance, Super-team of window installers, who are incredibly well-coordinated, thoughtful and clear did their job (Bravo, guys!), I will recommend ONLY YOU to all my friends!

Vladimir 22-10-2018

I want to express my gratitude to the German Windows company, namely the manager Olga, the driver (unfortunately I didn’t ask for the name), the installers Pavel and Daniel. Thank you very much!!!
Like many, I chose a company for a long time, naturally I wanted to get high-quality windows at an affordable price.
Called measurers from different companies.
After reading the reviews, it was decided to order windows in this company.
17.10. Olga called and reminded me that the windows would be delivered tomorrow. Naturally, there was anxiety somewhere inside, during the renovation of the apartment, I encountered such "sharashkin offices" with rudeness, inaccuracy, and what can I say, kicked out two teams for poor-quality work. So the window was looking forward to.
18.10. The driver called and delivered as agreed. 19.10. installers Pavel and Daniel arrived. They worked carefully, listened to all the wishes, everything was clear, smooth, no "jambs".
I recommend this company to everyone.
The number of the contract, as many write I will not say, is not at hand. The installation took place at Filevsky Boulevard d23.

Konstantin Petrovich 10-07-2018

Clear and high-quality work at all stages! Special thanks to Irina for the time and effort spent on changes in the course of the calculation and explanations (detailed!) On all technical issues. Professional work of installers Pavel and Daniil, exceeding the deadlines (did it faster!) Without loss of quality! Agreement No. 135/06-18. st. Academician Pilyugina, 24/2.

Svetlana 27-06-2018

Viktorov I.I 30-05-2018

Also applied to German Windows Contract: 93/05-2018
Satisfied with the work. I glazed a three-ruble note in an old house.
For the price it was the best offer on rehau than in other companies.
Delivered within the promised time frame, no issues. Satisfied, I recommend.

Sergey 17-04-2018

Turning to the German Windows company in order to change old wooden windows to new plastic ones. The manager of the company, Irina contacted us very quickly and quickly made the calculation. The next day, the measurer Alexander arrived, he explained everything to us about all sorts of nuances associated with manufacturing. We chose Rehau Grazio windows. The total cost of the order was 73,600 rubles. The production took a minimum amount of time only 5 days. And then came the day of installation. Delivery was after 14, the time is not very convenient (the whole day is broken). The next day, masters Pavel and Daniel arrived, they conscientiously and professionally installed windows and a balcony block. At the end of the installation of the first window, the inspector arrived to randomly check the quality of the installation. It took about 9 hours to install, taking into account the fact that all the work was done on a turnkey basis. We express our deep gratitude to the measurer Alexander and the installers for the quality work done, we recommend this company to everyone. City of Moscow Saltykovskaya street 21. Agreement No. 45/03-2018.

As a rule, everything produced in Germany becomes a constant bestseller, even far beyond the borders of this country. German wooden windows are no exception, they are the real embodiment of the legendary German quality.

It is a striking fact, but a nation that so scrupulously honors centuries-old traditions has learned to deftly introduce them into modern life. Therefore, wooden windows from Germany are a new interpretation of centuries-old technologies and designs. This is a new architectural design, fresh solutions in decor and boldness in color shades. Despite a lot of new qualities, windows from Germany still remain the standard of reliability, practicality and style.

The Krauts company sells German windows as an official website - a representative of a German manufacturer in Russia. Therefore, with our help, you have a unique opportunity to appreciate the high level of German window production and their incredibly clear compliance with European GOSTs. Moreover, German windows purchased on the official website protect the consumer from any force majeure thanks to quality certificates and factory warranties.

A feature of wooden windows from Germany is their impeccable reputation and excellent performance, which no one can surpass.
domestic manufacturer. They have improved tightness due to ultra-modern seals and air pockets, as well as amazing sound and heat insulation properties. New generation glass can adapt to any type of room, providing the right level of light transmission and protection from infrared radiation and UV rays. It is windows and facade systems from Germany that can create in your home a level of comfort that you could not even dream of!

Choosing windows made in Germany, you get premium products that will serve you faithfully. German wooden windows with double-glazed windows of any complexity can be perfectly corrected in case of failure. They are more maintainable than plastic ones, since in PVC windows it is impossible to partially replace the frame, only a complete one. The service life of German window blocks is very long, thanks to which factories give a guarantee for their product of 10-15 years. We offer our customers German windows, the company of which has proven itself brilliantly all over the world.

From the article you will learn:

The history of windows goes back thousands of years. Technological progress is doing its job - over the centuries, not only the appearance of light-transmitting structures has changed, but also the material from which they are made. In the beginning, there was a bull bladder that closed the window openings of the huts of the ancient inhabitants, after which a stone window appeared, and then a wooden one.

In the middle of the last century, thanks to a qualitative “spurt of technology”, the first plastic windows began to appear, the basis of which is a compressed solid substance - polyvinyl chloride (PVC). Differing (even at that time) from their wooden counterparts in improved heat-saving and sound insulation characteristics, such light-transmitting systems quickly won trust first from wealthy citizens, and over time, due to cost reduction, from ordinary consumers.

It is worth noting that the first plastic windows appeared in the United States, but such glazing technology was not developed there in the early stages of its existence. By improving the design and adding certain innovations, German manufacturers have set their own standard for plastic windows, which is still the focus of most buyers (and manufacturers) of PVC systems around the world.

Why are German plastic windows better than others?

The answer is simple - quality. Impeccable quality characteristics of German plastic windows are achieved by strict adherence to technology, with the use of control at every stage of production. In addition, the chemical composition of raw materials meets all European standards for environmental friendliness and safety for humans.

Windows made according to German technology have a smooth, rigid profile that can withstand significant wind loads (the so-called good windage). Regardless of the color of the plastic window - white, or, its color is uniform over the entire area of ​​\u200b\u200bthe profile.

German window products are completed with modern, again German, components: double-glazed windows and reliable, convenient fittings.

Such a combination of high quality components, coupled with their excellent characteristics, makes the choice of an ordinary buyer in favor of buying German plastic windows a completely justified decision.

Advantages of German PVC windows

Unlike little-known companies that have only recently entered the European market for such products, German manufacturers of plastic windows have achieved the highest quality of similar products over the years. They are distinguished by the presence of:

  1. Improved characteristics for heat and noise insulation. In a room glazed with German plastic windows, heat loss is much less - this is especially important in winter, when the temperature outside is -30C, and every degree is important inside. In the summer, for many people, an important component of a comfortable pastime indoors is a reduced level of street noise. Plastic German windows fully provide a reduction in the number of sounds transmitted from the outside.
  2. Long service life. German light-transmitting structures, with proper care, are capable of more than 40 years. Such a long service life is ensured by high-quality fitting mechanisms designed for a large number of opening / closing cycles (up to 20,000!).
  3. Great appearance. German plastic windows can be not only standard white. If desired, the buyer can order designs of almost any color - from light blue to deep pink or light green. This fact makes German windows appropriate for installation when creating a certain style of interior. A variety of colors is achieved not by painting the profile, but by using it, which involves applying a film of a certain shade to the surface of the profile.
  • Class A– with wall thickness from 2.5 to 2.8 mm. Profiles belonging to this class are the most durable and warm.
  • Class B- with wall thickness from 2.0 to 2.5 mm. The so-called "average" both in terms of strength characteristics and heat saving.
  • Class C– all other profiles.

Important! Sometimes, under the guise of a quality profile, some little-known companies sell the so-called “objective” profile. Windows with such a frame should only be installed in technical rooms. It is marked as "Object".

Consider the main design features of German PVC windows, which you need to pay attention to when choosing, regardless of the model.

Profile surface uniformity

PVC coating of the profile should not have any defects: chips, bubbles, uneven surface color. An important point is also the absence of dents, which is characteristic of poor-quality window transportation.

Profile width and thickness

The most popular version of the plastic window, which includes a narrow profile. Such a 58 mm profile is suitable for installation in window openings of houses located in the southern regions, as well as in the middle lane of our country. For the northern regions, it is better to choose a German profile with a width of either 70 mm or 90 mm. The latter provides maximum heat saving, but it is also not cheap. The wall thickness of the framing should be between 2.5 and 2.8 mm (Class A).

Intimacy profile

The number of air chambers in a profile directly depends on its thickness. A 58 mm product includes no more than three cameras, 70 mm - from three to five, 90 mm - five or six. It is important to understand that the more chambers dividing the internal space of the profile into compartments, the better the profile's characteristics in terms of thermal conductivity and soundproofing.

Insulating glass unit

At its core, a transparent design, which includes several sheets of glass (from 2 to 4). The space between the panes is edged with a metal frame and hermetically sealed with a sealant.

Read also: Filling the double-glazed window with an inert gas. Features and Benefits

A double-glazed window, like a window profile, is also divided into chambers inside. The goal is the same - to reduce the amount of heat removed from the room to the outside.

Single-chamber double-glazed windows are widely used for glazing openings of large areas, since due to the presence of only two glasses in their design, their weight is minimal. German models of plastic windows with single-chamber double-glazed windows are perfect for glazing cottages, country houses, cottages. To close the window openings of city apartments, due to their low heat and sound insulation characteristics, such double-glazed windows are not recommended, but for installation on balconies and loggias, due to their low weight, they are completely.

Double-glazed windows with two chambers are ideal for installation both in apartments and offices. Three sheets of glass do a good job of retaining heat in a glazed room and provide an acceptable level of sound insulation.

Plastic windows with three-chamber double-glazed windows are mainly in demand in the regions of the country where "His Majesty the Cold" rules. They use a wide 90 mm profile, which, coupled with four panes of double-glazed windows, provide maximum heat retention in the room.

The presence of gas in the double-glazed window

The inert gas pumped into the chambers of the double-glazed window of a plastic window is designed to reduce the heat loss of a light-transmitting structure. In most cases, argon is used, since it is cheaper for manufacturers than the use of another gas, krypton, for these purposes. The difference in the ability to save heat between gases is minimal. However, it itself increases the possibilities of a double-glazed window in terms of heat retention by quite worthy 5-10%. Therefore, if possible, it is recommended to choose a model of German windows with a double-glazed window containing an inert gas.

Window profile color

The use of modern technologies in the manufacture of plastic windows allows the production of PVC profiles not only in white. the features of the created interior are perfectly emphasized. Today, brown windows are gaining popularity, as they are associated with wood - a symbol of environmental cleanliness.

Where is it appropriate to install German-made PVC windows?

German plastic windows will successfully fit into or a private house. It is especially appropriate to install such structures in the children's room and in the bedroom.

Thanks to the ecological purity of the profile, adults do not have to worry about the health of the younger generation. The safety of the child will be ensured by high-quality fittings, again, made in Germany. Capable (with a key or in another way), it thereby blocks the window sashes from unauthorized opening by children.

As you know, the bedroom in the apartment serves as a place in which a person rests and gains strength. Therefore, it is especially important to ensure peace and quiet in this room. German plastic windows will do just fine: multi-chamber profiles and double-glazed windows perfectly prevent the passage of sounds from the street, and an elastic rubber sealant applied around the perimeter of the sashes will provide high-quality noise attenuation.

Let's compare the features of the products of various German companies involved in the production of plastic windows, and make a kind of mini-review. A description of the full capabilities and characteristics of the models of each brand is available at the appropriate links.

rehau

Perhaps the most popular brand of plastic windows in Russia. Rehau products have won the sympathy of the consumer, as they have all the qualities that allow them to be classified as elite: reliability, modern design, environmental friendliness and long service life. All these qualities make the choice in favor of the Rehau brand quite a reasonable decision.

You can read more about Rehau plastic windows models here.

Veka

The German leader in the production of plastic windows. PVC profile VEKA is oriented to Russian climatic conditions. It has a sealing gum that can withstand severe frosty temperatures. The smooth surface of the profile perfectly keeps the original color without fading in the sun.

"Which window profiles are the best?" – a question that is asked by everyone who wants to finally install energy-saving windows in their home. However, despite the external similarity of all structures, inside all the profiles are completely different, some of which do not at all correspond to the SNiP of the Russian Federation and are not recommended for installation in residential premises. First of all, when choosing a window system, it is necessary to pay attention to the number of chambers and the coefficient of heat resistance (the higher the better). The next important parameter of PVC windows is the provided opportunity for reinforcement - this increases the load-bearing characteristics of the structure, increases the service life of the system and its resistance to plastic deformation. To make it easier for the buyer to decide on the choice of a high-quality window system, this rating was collected. So, TOP 10 best companies and models of PVC window profiles:

aluPlast

Aluplast opens the quality rating of window profiles. The company provides a good range of technical solutions for window systems. The latest developments that increase the energy efficiency of structures are embodied in the AluPlast energeto series. The Energeto 8000 model has excellent thermal resistance when installed with triple glazing - 1.27 m2 * C / W. According to the manufacturer, if the structure is not reinforced with steel (this reduces the bearing capacity), its thermal conductivity is significantly reduced, reaching a heat resistance coefficient of up to 1.67 m2 * C / W.

Deceuninck

Deceuninck is ranked 9th in the pvc profile rating. The Belgian company has been manufacturing polyvinyl chloride window blanks for about 40 years at production facilities located in Europe, Asia and North America. The flagship of all Deceuninck lines is the 84mm Eforte model. This system is recommended for installation even in the northern latitudes of Russia due to the high coefficient of thermal resistance - 1.1 m2 * C / W. The service life of "Eforte" is 30-40 years, subject to the temperature amplitude from -60 to +75 degrees Celsius.

Proplex

The Russian company Proplex takes the 8th place in the rating of window profiles in 2018. All Proplex products are produced in Russia, so the prices for finished products from this profile are much lower than imported analogues. Proplex produces 5 different window systems: 2,3,4,5-chamber. For installation in dachas, loggias and non-residential premises, a two-chamber Proplex Outline is recommended - the cheapest design with a heat resistance coefficient of only 55 m2 * C / W. A more reliable system recommended for installation in apartments and residential premises is the four-chamber Proplex Comfort with a thermal resistance of 0.8 m2 * C / B, which fully meets the requirements of SNiP RF.

Kaleva

The seventh place in the ranking of pvc window profiles is occupied by the Kaleva brand. The company produces a dozen different models, each of which has its own advantages and disadvantages. The most inexpensive option with everything you need is Kaleva Standart - this is a four-chamber profile with the possibility of steel reinforcement and a built-in double-glazed window filled with an inert argon gas, which has a very low thermal conductivity. The Kaleva Titan Plus five-chamber window system is the company's most heat-saving and noise-suppressing design. Feature of Titan Plus: in addition to the main two-chamber 40mm insulating glass filled with argon, blinds and one more external glass are built into the system - thus, this model provides an incomparable degree of insulation with other analogues, thanks to an insulating glass with three independent air partitions, two of which are filled with argon.

Montblanc

Montblanc (pronounced MONT-BLANC) occupies a leading position in the ranking of plastic window profiles in 2018 in terms of price-quality ratio. Mont Blanc is an Austrian company that has been producing low-cost, high-quality profiles for translucent structures for more than 15 years. Due to the opening of the Mont Blanc industrial plant in the Moscow region in 2001, the company gained wide popularity in Russia. The company produces several lines of window systems: Montblanc, Reachmont, Goodwin and ECP. All products have a 40 to 60 year guaranteed service life and build widths of 58 to 70mm, except for the 80mm Montblanc Grand with six airboxes. A four-chamber Montblanc Quadro system with a thermal resistance coefficient of 0.8 C / W per m2 is recommended for installation - this is a high indicator that meets the requirements of GOST and Building Codes and Rules in many regions of the Russian Federation.

Salamander

The TOP 5 rating of profiles for plastic windows in 2018 is opened by one of the most expensive brands in the rating. The company has three different systems in its product range: Salamnder 2d/Streamline/BlueEvolution. The most budget option is considered to be a three-chamber 2D with the possibility of reinforcing the internal chambers with steel. The wall thickness of the Salamander 2D: external 3mm, rebate 2.5m, and internal 1mm - this provides a good noise reduction rate (up to 46dB) and high energy efficiency class A +. This model is designed for installation of a single double-glazed window. Salamander BlueEvolution is the next model recommended for installation in any region of Russia. BlueEvolution is the only profile available on the Russian market (meaning at a reasonable price) with a maximum width of a built-in double-glazed window - 60mm (if desired, you can install a three-chamber double-glazed window). Salander BlueEvolution is ideal for the continental climate of Russia: it protects from heavy rains, effectively maintains the temperature even at -40 degrees, and reliably resists drafts, thanks to an elastic rubber seal.

KBE

4th place in the rating of pvc window profiles belongs to the German manufacturer KBE. The name of the rulers at KBE is tritely simple and depends on the width of the profile: KBE 58/70/76/88. As anyone planning to change windows should be aware, the wider the system, the more cameras it has, which means that the heat saving indicators of such a design are obviously high.

The best option for installation is the KBE76MD model, a six-chamber design made using lead-free greenline technology from recycled PVC. Recycling PVC allows you to "kill" two birds with one stone: to recycle PVC waste, and save on the cost of raw materials, which directly affects the retail price of the product.

The most important thing in greenline technology from KBE is the complete preservation of the physical and mechanical properties of the material, that is, raw materials of primary processing are no different from recycled materials. The best product from KBE is the 88mm greenline KBE AD: this model has an outer wall thickness of 3mm and 6 independent air compartments inside with the possibility of aluminum reinforcement - all this provides an unconditionally high rate of thermal efficiency and noise reduction.

VEKA

The bronze medalist in the ranking of the best pvc window profiles goes to VEKA. VEKA offers 8 class A models with 3mm outer wall thickness. The most economical solution is VEKO Euroline: a structure with three air chambers designed for an insulating glass unit up to 24 mm (usually two glasses - one chamber), the doors and frames in which it is possible to reinforce for greater reliability of the system.

The energy-efficient A++ class VEKO Swingline series will be the best solution in terms of price and quality for offices and apartments: 5 independent air chambers with an outer wall thickness of 3mm will provide warmth and comfort in the room even on harsh winter evenings. The most expensive and massive copy is VEKO Alphaline. This model is equipped with six air compartments with a total width of 90mm - these are the most heat-saving windows from VEKO in which you can install a double-glazed window up to 50mm thick (3 glasses) and enjoy silence and comfort all year round.

WDS

WDS takes the second place among the best profiles for plastic windows in 2018. The manufacturer has several product lines in its assortment, each of which has a difference in noise reduction coefficient, heat saving and the number of cameras: WDS 400/500, WDS 4/7/8 Series. The best in terms of price-quality ratio is the class A 60mm WDS4 model, equipped with 4 independent air chambers, the possibility of aluminum reinforcement up to 1.5mm. For northern latitudes, it recommends WDS8 series for installation: a six-chamber metal-plastic profile with the possibility of mounting a double-glazed window up to 44 wide - this model retains heat 2.5 times more efficiently than WDS400 / 4Series.

rehau

Rehau is the leader of the rating, the best profile for plastic windows in 2018. The range of the company consists of 7 types of profiles with different number of air chambers, construction width and sound insulation level. The Rehau Euro-design series is an affordable and high-quality three-chamber profile with a thickness of 60mm, therefore it is recommended for installation for those who do not want to overpay. For lovers of sound sleep, Rehau Intelio will be a real find: a five-chamber profile 86mm thick with a noise reduction coefficient of 36dB (without double-glazed windows).

In cold climates, the 86 mm Rehau Geneo will help save up to 80% of heat: the six-chamber design ensures high tightness, maintains a huge gap between the temperature amplitudes in the room and outside the window, and also creates reliable protection against drafts, thereby maintaining comfort and coziness in indoors throughout the winter, even at -60 degrees. According to the manufacturer, all Rehau products have a minimum service life of 40 years, and some models even 60 years.

Premium German brand on the Russian market since 1995. With VEKA you get real German quality from a company with a 48-year history around the world.

  • ALL profile systems of the highest class "A"
  • ALL are frost-resistant and marked with the letter "M"
  • ALL have maximum 4-sided steel reinforcement
  • Uniform quality standard regardless of the country of production

The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.

The wider the profile and the greater the installation depth, the higher the thermal insulation.

Profiles ONLY top class "A"

According to the thickness of the inner walls, ALL of our profiles are of the highest class "A" - the thickness of their front wall is at least 3 mm.

  • class "A": front wall not less than 3.0 mm
  • class "B": front wall not less than 2.5 mm
  • class "C": wall thickness is not standardized

Please note that 80-90% of the Russian market are "B" and "C" classes and only 10-20% of "A" class profiles. At the same time, VEKA's product range contains ONLY A-class profiles.

As a matter of principle, we DO NOT use profile systems of classes "B" and "C" (with a front wall width of less than 3.0 mm).

ONLY frost-resistant profiles

According to GOST 30673-99 "PVC profiles for window and door blocks" in terms of resistance to climatic influences, ALL of our profiles are "frost-resistant" - for areas with AVERAGE monthly air temperature in January BELOW minus 20 ° C.

GOST standards for different classes:

  • normal version "N": the average temperature in January is minus 20 ° C and above
  • frost-resistant version "M": the average temperature in January is lower than minus 20°С

In our assortment ONLY frost-resistant profile systems, marked with the letter "M".

Heat transfer resistance (thermal heat resistance) is the main coefficient of thermal insulation. It is determined by the ratio of the temperature difference outside and inside the room to the heat flow passing through the window. The higher this number, the better the thermal insulation efficiency.

Evolutionary double-glazed windows SmartGlass 2.0

Our multifunctional double-glazed windows work for you both in winter and in summer. In winter, sputtering of silver particles saves up to 90% of the heat energy of heating devices, and in summer a double-glazed window reflects 25% more solar heat than ordinary plastic windows.

  • 42% more HEAT in winter (energy saving properties)
  • 25% less HEAT in summer (sun protection properties)

All our double-glazed windows contain special energy-efficient glasses. We DO NOT use ordinary glasses even in the most basic configurations.

AirDrive I, II and III climate control systems

Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode. These are NOT external devices (combs or valves), but BUILT-IN furniture ventilation.

Three options:

  • AirDrive I: night ventilation (1 mode)
  • AirDrive II: discrete multi-stage ventilation (3 modes)
  • AirDrive III: discrete multi-stage ventilation (5 modes)

We try not to install combs because of their appearance (only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).

MAX steel profile reinforcement

Reinforcement is a steel frame inside a PVC profile. This is what gives it rigidity. The more steel and stiffness angles, the more reliable the window geometry.

Types of reinforcement:

  • Square - 100% reinforcement on 4 sides, 4 stiffeners (maximum)
  • U-shaped - 75% reinforcement on 3 sides, 2 stiffeners (normal)
  • L-shaped - 50% reinforcement on 2 sides, 1 stiffener (very, very bad!)

All our profiles are reinforced to the MAXIMUM - from 4 sides and always with 4 stiffeners.

VEKA technologists managed to achieve a compromise between the unpretentiousness of a matte texture and spectacular gloss.

Pleasant shine and low sensitivity to external influences are the most noticeable feature of our window systems.

The VEKA profile complies not only with the Russian GOST, but also with the European building standard RAL.

Fitting © 2022 Design and interior of apartments