Stand for hot do-it-yourself in several versions. Cozy home: ideas for arranging your own kitchen How to make a hot stand from blinds

Hello dear needlewomen.

Tell me, does it happen that you have to serve a hot plate of food to your loved one on some table on which you can’t put hot food. Well, that's what hot pads are for, you might say. Naturally there is. There are comfortable cork coasters, but those beautiful coasters laminated with beautiful pictures are very expensive. And those on which there is no picture look uninteresting. And besides, they tend to get dirty.

Accidentally found a great idea for a hot plate holder. And I will share with you.

According to table etiquette, it is supposed to be served hot on substitution plates, but often, in ordinary life, napkins or coasters for plates are used instead if the table does not tolerate hot. The option with covers will be a great alternative to such solutions.

It is not necessary to take a cork stand, you can cut such a round piece from a laminate that closes the back walls of the cabinet or something that does not conduct heat and keeps its shape.

The fabric must be chosen elastic so that it can stretch well and have a beautiful look.

The fabric should not be voluminous, as there should not be a noticeable thickening on the back of the stand. Here are all the recommendations.

Just imagine how many possibilities this idea gives. To set the table for guests, friends, just for a pleasant family dinner with beautiful coasters for plates is wonderful.

If the table is beautiful, there is no reason to cover it with a tablecloth, and such coasters with removable, easily washable covers will make any dinner festive and enjoyable.

Read on the site: Crocheted napkins for table setting

“Very comfortable and cute crocheted napkins for table setting are easy to knit and, which is very important, evoke a feeling of comfort and tranquility in the house on a subconscious level.

A modern woman has many skills that indicate that she is an excellent hostess. The ability to serve beautifully is not the most important among all the virtues of a real hostess, but a beautifully decorated table helps the family feel that "everything is fine at home."

If on the table there is a luxurious tablecloth or runners, or both a tablecloth and runners, then such a stand with a cover can save all this splendor. To do this, it needs to be made larger in diameter, then the crumbs and splashes will be on a beautiful protection that can be easily washed. Or sew another, even more beautiful.

Look, what a beauty.

Pleasant little things, made by hand, add warmth and comfort to your home. Such things create a unique atmosphere, and also bring many joyful moments in the process of working on them.
The kitchen is the most comfortable and sought-after place in the house. After all, it is in the kitchen that we spend a lot of time cooking, washing dishes or having heart-to-heart conversations with a cup of tea. In order not to damage the surface of your favorite table or expensive kitchen countertop with the hot bottom of a cup of tea, we need a hot stand. If you are a creative person, then you will come up with many ways to make such a stand. This small kitchen accessory can be knitted, carved from wood, or woven from a wicker. Let's look at three simple ways to make a hot coaster on the table. Most likely, you can easily find all the necessary materials at home.

Making a hot stand from discs, coarse linen thread and wine corks

A cork coaster is a popular handmade version of this kitchen accessory. We suggest you make such a stand in an easy and fast way.

For needlework we need:

• 2 unnecessary CDs;
• a sheet of thick cardboard;
• several meters of coarse linen thread;
• corks from wine, about 15 pcs;
• a good glue that can stick a linen thread to plastic (you can use Moment Crystal).

We cut out a round blank in the shape of a disk from cardboard. We make a “sandwich” with glue: the first layer is a disk, the second is a cardboard part, the third is a disk again.

While the blank dries, cut the corks in half. We should get 30 halves. We try to ensure that the segments of the corks are the same length.

We lay the linen thread on a round blank. To do this, in the center of the part, to the cardboard, which is visible through the hole in the disk, we glue the tip of the thread. Then we wind the thread in a spiral, gluing it in the course of work, until we cover the entire surface of the disk. You can make a side if you glue several new turns of thread along the edge of the workpiece to the already formed ones.

Then, using the same glue, we fasten the cut corks in a circle. We are waiting for the glue to dry.

Now we know how to make easy-to-make cork coasters.

How to make a hot stand from an unnecessary computer power supply

Surely many have preserved at home old, already broken parts from the computer. Now we will learn how you can easily and quickly make a stand from an unnecessary power supply for a computer. If you don't have this part, don't worry. Perhaps one of your friends has such a treasure, or there is a service center for the repair of digital equipment nearby, where you can purchase a non-working power supply for a nominal fee or a simple “Thank you”.

The manufacturing process is very easy. It is necessary to unscrew the cover of the block and bend its side walls inward. This is a job for a man, because some physical effort is required. After the stand is ready, it can be decorated. For example, paint with acrylic paints.

Such a stand will withstand any, even very hot surface.

Stand for hot from a wooden base and piece aquarium pebbles

Very beautiful hot coasters are obtained from piece aquarium pebbles. Usually they are made of glass. And glass can crack at high temperatures, so you can’t put a pan that has just been removed from the fire on such a stand. But a mug of hot tea or a plate of delicious soup will look great on it.

List of required materials:

• wooden base for the stand;
• piece aquarium pebbles;
• acrylic paint to match the stones;
• primer to wood.

First you need to cut it out of the board or purchase a wooden blank of the right size. You can show your imagination and choose something else as the basis, for example, a “sandwich” made of disks and cardboard, as at the beginning of the article. But square coasters decorated with pebbles look more interesting. Then we prime the workpiece. We wait until the primer dries, and paint with acrylic paint. The color of the paint should be in harmony with the stones. The last step is to put our aquarium decor on glue. You can use the same "Crystal Moment".

Our coasters are ready to perform their function.

Making coasters for hot dishes is a fascinating and creative process. If you have a lot of ideas and no longer need coasters at home, you can make a small gift for your friends. They will definitely like the original hot stand. The master class published on our website will help you master the exciting process of making DIY kitchen accessories.

(Visited 3,993 times, 1 visits today)

Such hot coasters can be seen in large numbers in the Crimean souvenir stalls. They are made from juniper and they diverge very quickly. In the conditions of the middle zone, of course, you cannot meet juniper, but on the other hand, it is very easy to make such a stand with your own hands from tree branches with a beautiful pattern on the cut. These are acacia, apple, plum, apricot, oak and ash.

In an hour, you can make several of these coasters. To begin with, we need to pick up branches 3-6 cm thick. You can combine saw cuts from branches of different thicknesses, it will be beautiful.

It is most convenient to cut a branch into saw cuts 4-5 mm thick with a miter saw:

But you can cut saw cuts with a hacksaw for wood. It is advisable to sand each cut from the front side with sandpaper.

The bark can be peeled off with a knife, but this is not necessary, especially if the bark is tightly adjacent.

Now we combine the stand from saw cuts of different diameters (in my case). Front facing inward:

However, it should be borne in mind that the fewer links, the easier it will be to glue the stand. It is desirable that the tree rounds adjoin each other at several points. We glue together the links of the stand, laying saw cuts on top of several circles. To do this, we coat at the junction with PVA glue:

After making sure that all the links are linked together, we send the stand to dry under pressure. I took a linen bag of sand, put it on a stand and put another bucket of water on top. The stand is glued together in 4-5 hours.

There is another option for making a wooden hot stand. We cut out a circle from the matting and glue the cut branches on it on both sides. It turns out very stylish and beautiful. It's also easier to do this:

Please rate this post:

Stand for hot decoupage technique. Master class with step by step photos

Sharapova Natalya Anatolyevna, educator, GBOU Gymnasium 1551, North-West Administrative District, Moscow.
Master class for teachers, parents and children aged 6-7.
Purpose: stand; can be used as a cup holder, as well as interior decoration.
Target: Development of children's creative abilities.
Tasks: introduce children to the application using the decoupage technique;
show the features of work in this technique;
educate accuracy, aesthetic taste.
Materials: disk, napkin, white printed paper, eggshell, brush, PVA glue, scissors, pencil, ruler, crayon.
Stages of work
1. Necessary materials.

2. Before starting work, seal the central hole of the disk with white printed paper. To do this, cut out a circle D = 4cm. We glue the circle on PVA glue.
3. Let's get to work with eggshells. You can use the shell after boiling the egg, or you can use it from a raw egg.

4. Apply glue to the disk, retreating from the edge of 2 cm. Press small pieces of the shell to the disk, crushing it into small pieces, creating a mosaic surface. We are waiting for complete drying.

5. Let's start decoupage. We cut the napkin into 4 parts.
Separate the top layer of the patterned napkin from the base.
For work, we need the top of the napkin.

6. We apply PVA glue to the disk, carefully smearing the entire surface. We attach a picture to the disk. Carefully smooth the base of the napkin, leaving no wrinkles on the surface of the disc.

7. Turn over the disk. Scissors round the corners of the napkin, leaving an allowance of 2 cm.

8. Lubricate the disk with PVA glue, retreating 2 cm from the edge. We bend the napkin with a brush with glue. We are waiting for complete drying.

9. We coat the front side with PVA glue to give strength and shine to the napkin.

10. To give the stand a neat and finished look, glue a circle cut out of thick woolen fabric on the back of the disk. Thick fabric will not allow the disc to slide on the surface of the table; We cut a circle of fabric according to the diameter of the disk without allowances. We glue the fabric to the disk with transparent glue "moment".

11. The stand is ready.

To make the kitchen more comfortable, needlewomen can make a hot stand with their own hands. This is not only a beautiful interior detail, but also a very necessary little thing. Any materials will be used.

Wood

The advantage of using this material is that it is more durable than, for example, fabric. To get a hot stand made of wood, made with your own hands, you will need:

• Wooden blanks (sold in needlework stores. You choose the shape at your discretion).
• Simple pencil.
• Washing gum.
• Acrylic lacquer.
• Paints, watercolors are best.
• Brush.
• A device for burning.

Let's get to work:

1. First, draw on paper what a hot stand should look like, made with your own hands. It can be flowers, berries, an ornament or an inscription. The border along the edges, which serves as a frame, looks beautiful. By doing this, it will be easier for you in the future. Now transfer the image with a simple pencil to a wooden blank.
2. Take the burner and wait until it heats up. When everything is ready to continue working, burn the drawing.
3. If in some places you can see a simple pencil, then be sure to wipe it with a rubber band, otherwise the work will look sloppy.
4. You can leave the design of the stand in this form, just cover it with acrylic varnish, or you can continue to decorate.
5. To do this, take the paints and start decorating. Do this very carefully, because it will be difficult to get rid of errors. If you are working with acrylic, then pay attention to the fact that in some places you will have to apply several layers to add saturation. Also, these paints can leak.
6. The stand should dry out, and then it must be varnished and allowed to stand for several hours to dry completely.

Do-it-yourself hot pot stand made!

Felt

Do-it-yourself coasters made of felt are even easier to make. They give more room for imagination than a tree. You can choose the color and design based on the style of your kitchen.

To create "citrus" coasters you need to take:

• Different colored felt (orange for orange, yellow for lemon, green for lime, etc.)
• Scissors.
• Threads of colors suitable for the fabric or white.
• Needle.
• Pins.

What do we have to do:

1. Create blanks. For one fruit, you need two large circles of colored felt (the size of a future stand), a slightly smaller white circle and eight colored slices.
2. Arrange the blanks in this order: large circle, medium and slices. Prick with a pin.
3. Sew the slices around the perimeter through both layers.
4. To hide the seams, you need to sew the second large circle to the bottom.

Everything is very simple! Create a few more of these "fruits" so that all the guests have enough.

Idea

To get a hot stand, which is not difficult to make with your own hands, you can use scraps from felt. To do this, you need only one large piece, which will be the base, and several strips 5 millimeters wide. The length doesn't matter.

Take 3 different colors and put them on top of each other with a ladder, the indents should be up to 10 millimeters. The beginning needs to be glued, now start twisting the strips tightly with a snail, add glue if necessary. To complete the flagellum, make the inner strip shorter than the outer one by 2 centimeters and fix it with glue, do the same with the middle one, only make it shorter by only 5 millimeters. Make as many snails as needed to cover the entire base. Attach blanks to it using a thermal gun.

Textile

To create such coasters for hot do-it-yourself fabric, you will need small trimmings. You don't even have to go to the store to buy new materials, you probably have them lying around somewhere at home. So, for work you will need:

• Fabric in eight different colors.
• Sewing machine (if not, you can try to sew neatly with your hands).
• Hexagon pattern.
• Scissors.

What do we have to do:

A stand for hot, made with your own hands, will be a beautiful addition to any feast. As you have seen, it is not at all difficult to make it from different materials.