Plywood honeycomb stands drawings. Wooden stands and accessories for mobile phones and tablets. Pouch for tablet or phone

When there are cute cozy little things in the house, it helps to create an atmosphere of warmth. Making something interesting and useful at the same time is not so difficult. Today, almost everyone has a mobile phone. When we return home, we most often put it on the table. It happens that we do not notice and throw paper or other things on top, and sometimes we completely lose it on the desktop. A do-it-yourself phone stand solves two problems at once: you can always make room for your phone and design it yourself.

How to make a phone stand?

Surely you have at least one cardboard box at home. From such junk material you can create something unique. We suggest making a phone stand out of paper and an old box.

For work, you need to prepare stationery glue, a pencil with a ruler, a knife.

Before you make a phone stand, you need to prepare the cardboard. We cut rectangles measuring 10x20cm. We need 9 of these blanks.

Now you need to glue them three by one.

On two we draw such a detail. This will be the sidewall of the do-it-yourself phone stand.

Cut out. In order for everything to be beautiful and the structure not to lose its stability, you need to lay the sidewalls one on top of the other and check how much they are the same.

We take a clerical knife and cut a hole in the form of a rectangle.

Next, you need to make the base for the stand for the phone with your own hands. We measure the width of the phone and cut out the stand from the third blank according to the size. The phone's width is the length of our rectangle. The width of the rectangle should be such that it can fit into the grooves on the sidewalls.

We assemble the structure. You will also need a small circle of cardboard, its diameter is slightly smaller than the distance between the sidewalls. (photo 8)

All blanks must be pasted over with paper. It can be newspaper clipping or scrapbooking paper.
To make the back, take two pencils or something similar. We make holes in the sidewalls and insert them there. On the axis we put our circle of cardboard.
Do-it-yourself mobile stand is ready!

Another do-it-yourself phone stand option

You can make a simpler version of such a cardboard stand.

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge number on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is a great solution for everyone.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.

What can you make a stand for a mobile phone?

Creating something yourself gives ample opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:

paper;
tree;
plastic;
gypsum;
any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

colorful paper or white, which will then be decorated;
multi-colored gouache, watercolor or acrylic paint;
glue;
ruler for measurements;
simple pencil;
scissors;
various decorative ornaments that will be appropriate are also worth keeping on hand.

Properly organized space will help to make the stand for the phone with your own hands will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity to become the owner of a beautiful and convenient accessory for a mobile phone.

Sequencing:

First you need to figure out what shape the stand will be.
After that, you need to draw templates of the desired sizes on the sheet.
Elements for the product are cut out on them.
Then, carefully, according to the scheme that was previously drawn or printed from some site, we glue the necessary details.
After that, you should wait until all the elements are fixed.
The next step is to connect the individual parts to each other.
Let all fasteners dry. After that, you can start decorating the product. At this stage, various sequins, buttons, beads and other small beautiful elements can be used.
After decorating, it can be considered a finished phone stand. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, you can’t get by with sketches and ideas alone. In this case, you will also need:

special equipment;
skills;
ability to work with wood.

Before you make a stand for the phone with your own hands, you should analyze your actions. If you have never worked with a tree before, then it is better to bet on a paper phone holder. And if you have experience, then for work you need to prepare:

the tree from which the structure will be built;
tools for working with wood;
product diagram;
felt-tip pen with which you can draw on wood;
ruler;
glue;
accessories (buttons, beads, rivets);
simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

First you need to find a suitable scheme for the product.
Then it is required to put marks on a wooden base, according to which the connector will be cut out in the future.
The next step is to cut out the shape with the existing tool.
Then you need to take control measurements and find out if the mobile phone fits in the cut out socket.
After that, you need to glue the prepared parts.
The next step is to smoothen the product. This can be done with a file or a special device powered by the mains.
When the surface is smooth, you can decorate the finished shape with some color.
After staining, you must wait for the product to dry.
The work is completed by gluing the accessories chosen for this mission.
At the end, a completely finished structure should be opened with varnish, which will add shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand, which was created by one's own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories are at home. It can be:

shells;
buttons;
rhinestones;
beads;
foil;
colored tape.

In general, everything that is at hand and has an unusual look can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.

Today it is impossible to imagine a modern person without a mobile phone, because it is not just a necessary thing, but a stylish accessory. But the mobile phone has one significant drawback - it is often lost. To no longer face the problem of tedious searching, you need to define some permanent place for the device - for example, a stand. You can buy it at the store or make your own.

How to make a simple phone stand

If you decide to create a stand yourself, you should first prepare all the necessary materials - a beautiful fabric, PVA glue, scissors, a marker, a stationery knife, a plastic container that should have a flat shape (you can use a jar from any cosmetic product).

First you need to go through all the empty bottles and jars in the house - choose the one that is the right size for your phone and wash it thoroughly using hot water. Now you need to dry it well to remove all moisture, otherwise your stand will not last long.

We take the phone and apply it to the container, while placing their lower planes at the same level. With the help of a marker, we leave a mark on the bottle - we highlight the height of the future stand, which will be as comfortable as possible for you. On the front of the bottle we make a horizontal line and continue it on the sides.

We turn the bottle and draw its holder on the back. We make it with a sufficiently large hole that will fully correspond to the size and shape of the “plug” - it should pass into it quite easily when charging the phone.

Using a clerical knife or scissors, cut out the stand along the already outlined contour. We take sandpaper (fine) and carefully process all the edges until they become perfectly smooth. It is necessary to go over the rest of the surface of the future stand with sandpaper, as it should acquire a slight roughness in order to better bond with glue.

Next, take a piece of bright fabric (here you can use any material). The main thing is to take such a segment that it is completely enough to wrap the entire stand. Lay the material face down.

We lubricate the front wall of the future stand with sufficiently thick layers of PVA and press it as tightly as possible to the fabric in those places that were determined earlier. Now we glue all the sides of the stand with glue, do not forget about the back, which also needs to be processed. We strongly stretch the fabric so that there are no air bubbles or wrinkles left. In the same way, we wrap the fabric in the bottom area - we must try to fix it well in the shape of the bottle.

As soon as the matter is evenly distributed over the surface of the bottle, and you fix it with glue on all sides of the product, except for the bottom, take scissors and carefully cut off all the excess as close to the edges as possible. Then apply another layer of glue.

According to the shape of the bottom of the bottle, cut out a piece of material separately and glue it from below to gently close all the cuts. We cover the bottom with an additional layer of glue.

At the end, you need to dry the stand well - you need to place it in such a way that the product does not come into contact with anything. We hang the stand on some kind of hook, spoon, pencil, pen, or put it in a glass.

As soon as the product is completely dry, using a clerical knife, carefully cut a hole in the holder. You need to check whether you have fixed the material on the sections well. All protruding edges must be carefully glued.

Phone stand: car model

This stand option is ideal for phones with a wide display and a long body. You can make such a model yourself, besides, it is very convenient to use and is perfect for use in a car. And it only takes a couple of minutes to create it.

So, you need to take a binder (this is a clip that is used to fasten sheets of paper together). You also need to pick up a suction cup, which will become a mounting device. In the place where the suction cup has a hook, we attach a binder to it and our phone stand is ready. You can easily attach it to any convenient place.

Attach a suction cup to the back cover of the phone (do not worry, it will not damage its surface, and there will be no ugly marks left). You can easily place the device not only in a vertical, but also in a horizontal position.

Modular origami: phone stand

You can make a phone stand using the modular origami technique. First you need to collect 24 white and 23 pink modules. The colors of the blanks can be chosen to your taste!

We fasten the white modules together in a circle in such a way that a circle is formed, while between each pair of white ones, you need to insert 1 pink module. As a result, you will get a cone, gradually tapering towards the top.

This design must be continued until the stand reaches the desired height, which must be determined taking into account the size of the phone. The device will be placed in the central part.

DIY phone stand: photo

DIY phone stand: video

A phone stand is a must! It allows you to organize the space in such a way that your mobile phone is always at your fingertips. The stand can be bought or made with your own hands using various techniques. Such products will not only be convenient options for storing your phone, they can be a great gift for your friends or loved ones.

You can make a small phone stand with your own hands from the simplest materials. Our small master class will help you in your work. Handmade items bring warmth and comfort to your home.

Such a funny cat phone stand is easy to make in one evening. To do this, we need fabric from old jeans to finish the cup, denim or any other fabric for the head, paws and tail.

For work you will need:

Denim fabric (stripes of different colors).
A piece of bright fabric for a scarf.
A little synthetic winterizer or cotton wool for paws, tail and head.
A glass of cotton swabs.
Bottom cardboard.
4 buttons.
Pencil, scissors, needle.

Let's get to work:

Take a sheet of paper and freehand draw a pattern. It's pretty simple, even if you can't draw. The head can be done like this: circle the bottom of your cup from under the cotton buds and step back a little from the edge. Get the head of a cat. Cut out the paper pattern. On it we will cut:

Head (with ears) - 2 parts,
paw-hand - 4 parts,
paw-leg - 4 parts,
tail - 2 parts.

We select materials:

Here is a box you need to take for work, it just fits perfectly in size:

Next, we will make bottoms for our stand. This chopstick cup has a bottom diameter of 8 cm. Yours may be different. For the outer bottom, we cut out a larger circle of cardboard, and for the inner bottom, 0.5 cm less than the bottom of the glass from under the sticks. Cut out a circle with a diameter of 7.5 cm from denim. Sweep along the edge with a thread, insert cardboard and tighten the thread. The second circle is 1.5 cm larger, cut out of denim.

For the inside of the stand, we take a suitable fabric measuring 12 cm (glass height + allowances on each side of 2 cm) * 27 cm (circumference + allowances of 1 cm). We sew the fabric along the short side. We cut the allowances in the lower part of the resulting lining in several places. We put the inner lining into the cup, distribute the notched allowances so that there are no large folds. You can drop a little glue so that the lining does not “walk”.

We turn the top allowance on the outside of the stand. We also fix it by dripping glue in a circle. If there is no glue available, use tape. Then we must draw the belly of the cat. For the top and bottom, trimmings from the legs are well suited. Lay out the strips and fasten them with pins.

Sew all the pieces along the short side. We put on our stand everything that we sewed. On top of the cup we sew the lining and the top of the product with a hidden seam. Then we sew a large bottom. Make sure it doesn't protrude beyond the diameter of the glass. If the bottom is large, cut off the excess cardboard.

We put the cat pattern on the fabric from which you decided to sew it. Cut out a pattern from paper and fasten with pins to the fabric. Cut out, adding a 0.5 cm seam allowance.

Embroider the cat's face the way you like. You can sew beads or buttons instead of eyes.

We sew the paws, tail and head, leaving small gaps in the seams for stuffing with padding polyester. We turn out the details of the head, paws, and tail. We stuff the blanks with synthetic winterizer or cotton wool.

Sew paws, head and tail to the stand. The paws are sewn on at the top and fastened with buttons.

Sew pieces of denim on the tail.

We tie a bright bow around our cat's neck, you can put a sewn mouse or fish in the paws. If you want to give a product, then a souvenir, for example, a smoking pipe.

How to make a cute and original phone stand out of paper, our small master class will tell. The stand can be made from the base: a cardboard ring left over from adhesive tape, an empty round box of chips, salt, coffee, or a cup of cotton swabs.

It will not be difficult for a home craftsman who has a minimum of tools and a maximum of diligence to make just such a wooden phone stand. As a material, a board 10 mm thick, plywood, is suitable. You can also use thinner plastic. Approximate dimensions are shown in the figure. The stand is 10 centimeters high, 8 cm wide (6 cm clean). Installed on two semicircles with a radius of 4 centimeters. Of course, before you get down to business, measure the widest of the phones that will stand in it. A stand is assembled for PVC glue, then decorated at your discretion. For example, in the figure above, the edging is processed by burning.

Well, here I think it’s hardly necessary to explain anything, especially to us - people who are not young. Yes, of course, many have learned, the good old "cassette" from a tape cassette.

Just remove the cassette, turn the cassette holder over, open it to the other side and you get a stand at an angle of about 75 degrees. The width of the "pocket" is about 12 millimeters, the current thin smartphone fits perfectly there.

Here is such a "brutal" stand for the phone from an ordinary aluminum plug. The two extreme teeth are bent at the very base at an angle of 90 degrees. The two middle tendrils are bent at a distance of 15 millimeters from the base, also at an angle of 90 degrees. Your gadget is inserted between them. The fork handle plays the role of a support.

This coaster requires six clothespins and one pencil. The pencil is preferably hexagonal, on a round clothespins will slide. I think it’s clear from the photo - four clothespins are legs, two on the top actually hold the gadget, a phone is inserted between their petals. The width adjustment is very large - the length of the pencil. By the way, even if a couple of clothespins are hooked to the edge of any vertical surface (let's say the wall of the box), they will successfully cope without four other clothespins and a pencil!

This stand is very simple, but also suitable for small phones. This is an ordinary old bank or discount plastic card. It should be divided across into three equal parts with a pencil and bent along the lines. But I would make the lower "heel" on which the phone will stand only a centimeter, and divide the remaining distance into the "shoulder" of the prop and support itself.

Categories

Popular