What to do if the water heater does not turn on. Water heater buttons - meanings and solutions to problems that have arisen with them. Checking electrical elements and heating elements

When the question arises of choosing a water heating system, many choose Polaris appliances. It has established itself as a manufacturer of reliable, safe devices that are easy to install and operate. Any Polaris water heater provides fast heating and good pressure.

Both flow models and Polaris storage boilers are equipped with a reliable heating element. It is in a protective flask and does not come into contact with water. This helps prevent corrosion. Storage devices are economical, they do not work constantly, but automatically turn on to maintain the set temperature.

Different models may have electronic or mechanical control, but all have a display on which you can monitor the water temperature and other parameters. It is possible to adjust the power level.

Additional Information! The inner walls of the tank are made of stainless steel, and the magnesium anode prevents corrosion. The outer walls have high-quality thermal insulation, which increases its performance and safety.

Most models are wall mounted. They are compact, can have a vertical or horizontal orientation. The design is made in a minimalist style: white body, display and control knobs. The water supply is mainly lower. Flow models are equipped with a shower head.

Advantages and disadvantages

Electric water heaters "Polaris" have many advantages that make them popular:

• reliable and durable;
• convenient management;
• Stylish design suitable for any bathroom or kitchen interior;
• high power and fast heating;
• a wide range of volume, dimensions and other characteristics;
• the kit includes hoses, shower head, wires.

Each device has its drawbacks. Most often, users note the high cost. But budget models have such a drawback as fragility. They have thin-walled tanks that are unreliable. And storage water heaters can be heavy and bulky, not every wall can withstand them. The disadvantage of flow models is the ability to provide one point of water intake. In addition, they only work with good water pressure.

Types of water heaters Polaris

The Polaris company produces many models that differ in the type of heating, volume, control method, and the presence of additional functions. All of them are divided into two large groups: storage and flow.

Flowing

This type of Polaris water heater is compact in size. They do not take up much space and are placed on the wall of the bathroom or kitchen. The principle of their operation is that cold water flows through the body, in which a circular heating element is installed. In contact with it, it heats up and comes out already hot. The degree of heating depends on the power of the device and pressure. In many models, you can set a certain temperature - up to 600.

Note! The operation of instantaneous water heaters depends on the pressure of the water. If it is weak, the device will not turn on.

Cumulative

The storage water heater polaris is convenient in that it provides a supply of hot water. It is collected in a tank, where special heaters heat it up. Moreover, many models have a function to maintain its temperature. This provides energy savings when the appliance heats the water once, and then turns on when it cools down. These devices are available in different sizes.

Thanks to the environmentally friendly inner coating, the water in the tank is kept clean and fresh even for a long time. They do not form corrosion, rust. Many models have a filter for incoming water.

Additional Information! Storage water heaters can provide hot water to several water points. They do not depend on pressure, so you can install them in the country.

10 liters

If hot water is needed for washing dishes or hands, then a 10-15 liter tank will suffice. It heats up very quickly and maintains its temperature for a long time.

30 liters

This volume of the tank is suitable for giving. It provides hot water for washing hands, dishes, cleaning. Enough even for one person to take a shower.

50 liters

On average, a 50-liter tank is enough to provide hot water to a family of 2 people. It will allow you to regularly take a shower, use hot water throughout the day.

80 liters

For the needs of an ordinary family of 3-4 people, an 80-liter tank is suitable. The advantages of such a water heater include the fact that it quickly heats the water, you can choose a temperature of up to 750. Then it cools down very slowly, allowing you to take a shower or even a bath.

100 liters

To meet the needs of a large family, a 100-liter storage water heater is required.

It can be connected to several points of water intake. This allows you to use hot water in the kitchen and bathroom.

The lineup

All water heaters "Polaris" are characterized by compact size and attractive design. Many storage models have a vertical orientation, a slightly elongated shape. Tanks up to 80 liters are mounted on the wall. Many models are produced, which are combined into several lines.

• The Gamma series are storage water heaters. They are distinguished by a housing and a heating element made of stainless steel, protected from corrosion. Unlike other models, they are installed horizontally. Convenient mechanical control, overheating protection and high power that provides fast heating are their advantages.
• Models of the Vega series are popular due to their fast heating and high performance. They are produced in different volumes, can be connected to 2 water intake points. Comes with shower head and filter.
• Aqua is a series of compact appliances with a copper element. They have electronic control, protection against overheating and leakage. The devices of this series have a stylish horizontal design.
• Orion - a series of instantaneous water heaters Polaris. Despite their small size, they have high performance and power. In a minute, 4 liters of water are heated up to 570. They are completed with a shower head.
• Mercury is also a compact instantaneous water heater with a quartz heating element. Equipped with a temperature indicator. It has mechanical control, 4 operating modes, digital display.

To choose the right Polaris water heater, you need to understand the main characteristics of common models. The most important thing to pay attention to is the power, the maximum heating temperature, the presence of protection systems.

Ultra IMF 50V

This is a storage water heater with a volume of 50 liters. Mounted on the wall, has a compact size, flat, so does not take up much space. Water supply from below, which is convenient for creating a normal pressure. The power of the device is small, 2.5 kW, but it can heat water up to 750.

Note! The device has a power indicator, overheating protection system and convenient mechanical control. Digital display and thermometer allow you to control the degree of heating.

Ultra IMF 80V

This is also a cumulative model with mechanical control. The volume of the tank is 80 liters, but its compact dimensions allow it to be mounted on the wall. The water heater provides several water intake points, heating water up to 750. Copper heating element and magnesium protective anode ensure uninterrupted operation of the device. It has a protection system from turning on without water, from overheating. And thanks to the stainless steel tank, the water is always clean.

FDRM-80V

The convenient capacious water heater on 80 liters is mounted on a wall. Eyeliner from below, you can connect several points. The device has a low power, only 2 kW, but heats water up to 750. Convenient mechanical control with a digital display makes it easier to operate the device. A multi-stage protection system makes it safe to use.

Note! The advantage of the model is accelerated heating and the ability to constantly maintain the set temperature.

Sigma IDF 50V

This 50-liter Polaris storage water heater has an electronic control system. It has a small size, so it can be easily mounted on the wall. Power of 2.5 kW provides fast heating. A feature of the model is a stainless steel heating element and a multi-stage overheating protection system.

FDS-50V

One of the most convenient models of storage water heaters. Its power is only 1.5 kW, but the special design of the heating element allows you to quickly heat water up to 750. Convenient electronic control with a digital display and several sensors makes it easier to operate the device.

Alpha IDF 50V

This water heater "Polaris" with a tank of 50 liters has a convenient electronic control system.

Mounted on the wall, despite the power of 1.5 kW, it heats the water quickly and can provide several water intake points. The device has a system of protection against overheating and from switching on without water.

User manual

All Polaris instruments are easy to use. But still, before using it, you must study the instructions. The most important thing is to understand how to turn it on, turn it off, what parameters can be adjusted.

Sometimes there may be such errors in the operation of the device:

• does not heat well;
• water does not flow;
• body leaks;
• the device makes a strange sound;
• the water at the outlet is dark in color.

Note! Although the instructions explain the cause of many problems and how to fix them, it is better to contact a service center.

Every summer, public utilities prepare for the next autumn-winter season and turn off hot water for a while.

A water heater becomes a real salvation for a city dweller for the period of planned work: it is enough to turn off the hot water supply valve and turn on the boiler so that hot water flows from the tap in a couple of hours.

However, any technique can fail, and a water heater is no exception. Often, when trying to start the boiler again, the user encounters an unexpected problem - the appliance does not turn on when the power button / buttons are pressed.

There may be several reasons for this problem, and all of them can be fixed by hand without calling the wizard.

To begin with, let's clarify what controls can be on the boiler, and what functions they perform.

Buttons on the body of the Termex water heater

As a rule, the following buttons and switches are present on the panel of water heaters (Termex, Ariston, Electrolux, etc.) with mechanical control:

• Mode I - inclusion of the first heating element;
• Mode II - switching on the second heating element;
• Temperature regulator - when the thermostat knob is turned clockwise, the temperature rises to +75 degrees;
• RCD button (residual current device) - works automatically when a current leakage occurs on the boiler body.

On the panel of modern models of Ariston storage heaters, you can also find additional buttons:

• Eco - when pressed, the stagnant water purification/disinfection system starts. If you leave the ECO button on the water heater on, after a certain time (1-2 weeks), the disinfection system will automatically start once a month for preventive purposes;
• FAST - button for turning on the fast heating system. By default, the boiler operates at the standard power level. Turning on the Fast button on the Ariston water heater starts an additional heating element, which speeds up the process of heating water.

Answers to frequently asked questions about the Termex water heater buttons

All storage water heaters (boilers) work on the same principle, and have a similar device.

This is how the wiring diagram of the most common Termex electric water heater with mechanical control looks like:

As can be seen from the diagram, there is nothing complicated in the device device.

1. The operation of two heating elements is regulated by a simple control panel, on which there are devices for monitoring and controlling heating.
2. Thermostats installed inside the flask allow you to smoothly adjust the temperature in the range from +7 to +75 degrees.
3. When the water in the storage tank cools down, the heating elements turn on again.

What to do if the Termex water heater does not turn on?

First you need to establish the cause of the problem. As practice shows, there may be several of them.

Here are the most common:

• The socket is faulty, there is no voltage in the 220 V network. To check this, it is enough to connect any other working electrical device to the socket;
• The integrity of the power wires is broken, there is no contact at the terminals of the heating element;
• The on/off button itself failed. In this case, it will help to solve the problem replacement of the ON/OFF buttons on the water heater;
• Worked water heater thermal protection button by breaking the electrical circuit. Thermal protection prevents overheating of water if for some reason the thermostat does not work. To start the boiler, you need to press the hidden thermal protection button. It is located directly on the thermostat block;
• The residual current device (RCD) has tripped. With a single operation of the RCD, you can reset the emergency shutdown button of the water heater by pressing the red switch located on the device itself. If a repeated shutdown occurs, this indicates the presence of serious defects and the need for repair of the electrical appliance.

In rare cases, the problem may be a malfunction of the RCD itself. However, more often protection is triggered when the integrity of the heating elements is violated.

You can check the performance of the heating elements using a tester (measuring resistance). A damaged heating element cannot be repaired, but you can always purchase a new heating element and replace it.

VIDEO REVIEW

How to change the button for turning on the Termex water heater with your own hands?

For this you need:

1. Disconnect the boiler from the network;
2. Remove the decorative trim by unscrewing the fixing screws, remove the control panel;
3. Disconnect the terminals going to the On / Off button;
4. Press 4 clips that hold the button case;
5. Remove button;
6. Install a new one in its place, assemble everything in the reverse order.

How to reset the hidden thermal protection button and clean / replace the heating element?

For this you need:

1. Disconnect the electrical appliance from the network;
2. Shut off the water supply, drain all the water from the tank;
3. Disconnect the water supply hoses (pipes) from the boiler;
4. Remove the water heater from the wall, place it on a flat surface with the bottom up;
5. Remove decorative trims, remove the control panel;
6. At this stage, access to the thermal protection button, which is located on the thermostat housing, will appear. Pay attention to her position. If the button is unlatched, you must press it until a characteristic sound is heard. If this is not done immediately, then after cleaning or replacing the heating element, the boiler will not start.
7. Unscrew the nuts of the flange that presses the heating element, disconnect all terminals, remove the heating element;
8. If scale is found on the heating element, it should be removed. To do this, the heating element is placed for some time in water with citric acid (50 grams of citric acid per 3 liters of water);
9. If the heating element has become unusable, it should be replaced. Take this opportunity to descale the tank to extend the life of the boiler. It is most convenient to do this with a hose with good water pressure;
10. Assemble everything in reverse order. Since in order to replace the heating element it will be necessary to disassemble the water heater completely, it will not be superfluous to photograph or draw a diagram of the connection of individual elements in the process;
11. Fill the tank with water, make a visual inspection for leaks, turn on the device.

If there is a need to purchase a high-quality water heater for your home or summer cottage, then you should pay attention to models from Polaris. This company represents a wide range of devices, among which you can easily choose the right option.

Specifications

Devices of this brand are available with different, but convenient controls. Some models are equipped with mechanical control, while others are electronic and even differ in the presence of a display that displays all the necessary information.

Also among the technical characteristics of a particular model, you should pay attention to the presence of a thermostat and power levels.

It is worth noting that all Polaris models have reliable protection, which is guaranteed to ensure uninterrupted and durable operation of the water heater. All devices must have protection against overheating and automatic shutdown. That is, in the event that the device becomes very hot, the work will stop automatically, preventing the water heater from spoiling.

The magnesium anode helps prevent corrosion of the inner walls of the tank, so it will last much longer.

In addition, the models of this brand are produced with a dry heating element, which is very reliable. The fact is that the heating element of the device is under reliable protection, is located in a sealed flask and does not come into direct contact with water.

Advantages and disadvantages

Each model of boilers from Polaris has many advantages, which should be discussed in more detail.

• The devices of this company are reliable, economical, durable and the reviews about them are the most positive. Each of them is equipped with convenient and understandable controls. In addition, quite a budget price of models is also their significant advantage.
• The devices from Polaris are characterized by high power, thanks to which they allow you to get hot water in a matter of minutes. The assortment regarding the volume of tanks is also pleasantly pleasing. You can choose any size that suits your family.
• Many consumers are attracted by the fact that devices from this brand are fully equipped. That is, you do not have to additionally buy wires, a shower, etc., everything is already included in the kit.
• In addition, the advantages include the original and stylish design of the devices, thanks to which they look very aesthetically pleasing in any interior, in perfect harmony with other modern appliances.

Despite all the advantages, water heaters from Polaris still have some disadvantages.

Consumers who already use devices of this brand note that some models are too bulky and heavy. Of course, this is a minus, especially if the house has thin walls. It is worth considering this fact during installation. If there is no confidence in the reliability of the walls, then you will need to take care of additional security and a fastening system.

In addition, among the shortcomings, consumers note the high price of some models. Therefore, before laying out a large amount for a particular model, you need to find out what its advantage is over more budget options.

More budget options, as a rule, differ in a tank with thin walls, which, of course, is a disadvantage. Such models will not be able to last too long and there is a risk that the device will soon begin to leak. Check all the nuances before buying and be sure to purchase a model with a guarantee.

Flow models often have such a disadvantage as servicing only one point. This is not very convenient, especially if hot water is needed both in the bathroom and in the kitchen. In addition, such models can work properly and smoothly if the house has good water pressure. Otherwise, interruptions in work will begin.

Kinds

Polaris water heaters come in a variety of types and sizes. There is a flowing water heater, and there is storage. Tank sizes also vary. It can be 10, 30, 50, 80, 100 liters and even 150.

Storage water heaters from this company are produced in volumes from 10 to 150 liters. As a rule, such models perfectly withstand pressure up to eight atmospheres. The design of such devices also has its own distinctive features. For example, storage models can be easily connected to a conventional outlet, which is very practical.

Many storage models from Polaris have the ability to connect to several points at once, which allows you to install one water heater in the house for all water intakes.

As for the time it takes to heat up, it all depends on the model and the volume of the tank. Usually, the first heating after installing the water heater takes at least half an hour. After that, the heating element will turn on when the water temperature drops. Thus, there will always be hot water in the tap of your house. This method of heating also helps to save energy.

In addition, storage tanks are equipped with high-quality heating elements and have excellent thermal insulation, thanks to which they heat water as quickly as possible and keep it hot for a long time.

When choosing a storage model, it is worth considering the fact that you need a separate place for its installation. If you need a water heater only for washing your face or washing dishes, then a tank of 10-15 liters is the best option. For regular showering, the volume should be at least 30 liters, on average - 50. And for those who are used to taking a bath often, it is worth buying boilers with a volume of 80 liters or more.

Another type of water heater is a flow. Its main difference lies in the fact that it is able to heat water to the desired temperature in almost a matter of seconds. Cold water, before getting into the tap, passes through the heating element and, immediately heated, pours out of the shower or tap.

Flow models are divided into two types: pressure and non-pressure. The first option is in great demand. Such models are mounted in the risers themselves, which saves space in any room. Their only drawback is that they are much more expensive than non-pressure ones.

Flowing water heaters, as a rule, are distinguished by their compactness. Most often they are installed in the kitchen.

Range overview

All models from this company attract with their design at first sight. For example, there are flat models that look great in the interior, becoming its bright detail. You can also choose a compact version, for example, with a volume of 15-20 liters.

• Series Models Gamma are in high demand among modern consumers, and for good reason. The tank of such devices is made of stainless steel, the case is made in a laconic design. Ten is also made of stainless steel. The control of such devices is very practical - mechanical. Besides, boilers are reliably protected from corrosion. Models of this series are considered one of the most hardy and durable.

• Series Vega is also represented by models of various sizes. All appliances are equipped with stainless steel tanks and powerful heating elements. Among the additional functions, it is worth noting the fast heating function, which allows you to get the desired amount of hot water as quickly as possible. It is easy to manage such devices, especially since they are equipped with a modern digital display that displays all the necessary information.
• Aqua- Another popular series of storage boilers from Polaris. The tank is also made of high-quality stainless steel, but the heating element in this series is copper. All devices, regardless of volume, are equipped with electronic control, special improved thermal insulation and powerful protection against overheating and various kinds of leaks.

• Series of storage water heaters Omega has all the qualities that were mentioned above. Separately, it is worth noting that the models are equipped with modern controls and an LED display, which makes it much more convenient to make settings. All water heaters are equipped with a magnesium anode, reliable protection against overheating and are characterized by high thermal insulation.
• As for flow devices, pay attention to the series Orion. Models of this series are equipped with a copper heating element, so that the water heats up quickly and efficiently. It comes with a handy shower head.
• Mercury- Another compact instantaneous water heater. The heating element of the device is quartz. The model is equipped with a special indicator, thanks to which it will be possible to know whether there is enough hot water. In addition, with this model it will be easy to choose the heating temperature yourself. A shower head is also included.

Trouble-shooting

It often happens that due to prolonged or improper operation, the boiler fails. Accordingly, the device needs to be repaired. Before calling a specialist, it is worth determining the cause of the problem, because often many problems can be fixed by hand. But someone can safely remove the control panel, disassemble the device and fix the problem, while someone does not even know how the digital temperature indicator is replaced.

Typically, owners of water heaters face the following problems:

• the device has stopped heating water or heats it poorly;
• the tank is leaking;
• water does not enter the tank well;
• there was a strange sound during operation.

An instruction manual is included with each device. As a rule, the most common problems are listed there, which can be easily solved by following the step-by-step instructions.