Extruded polystyrene foam technonikol carbon eco thickness. TechnoNIKOL XPS - extruded polystyrene foam. Carbon - strength provided by technology

Extruded polystyrene foam TECHNONICOL XPS is a heat-insulating material with evenly distributed closed cells. TECHNONICOL XPS does not absorb water, does not swell or shrink, is chemically resistant and does not rot.

High strength allows you to get a smooth and at the same time rigid base, which significantly increases the life of the entire thermal insulation system.

Application area:

TECHNONICOL XPS is used in general civil construction for thermal insulation of foundations, roofs, floors, and facade insulation.

Extruded polystyrene foam (or extruded polystyrene foam) is a new word in the field of thermal insulation technologies. Even despite the fact that the material began to be produced more than 60 years ago, it still has no analogues either in Russia or in the world. Expanded polystyrene TECHNONICOL XPS is a universal insulation in all respects.

Firstly, extruded polystyrene foam allows you to effectively insulate a wide variety of objects, structures and structures. In other words, it has a truly wide scope. TECHNONICOL XPS is used for thermal insulation of floors, walls, foundations, roofs, as well as various engineering structures and. Thus, extruded polystyrene foam finds application both in industrial and private construction.

Secondly, TECHNONICOL XPS insulation has unique technical characteristics. Extruded polystyrene foam has one of the lowest thermal conductivity among other similar products. In addition, TECHNONICOL XPS is characterized by chemical resistance, high compressive strength, water and vapor impermeability, as well as resistance to mold and fungi. Thus, TECHNONICOL XPS extruded polystyrene foam not only provides thermal insulation, but also effectively prevents the impact of a number of other destructive and negative factors.

In addition, extruded polystyrene foam belongs to the class of environmentally friendly materials, which makes it out of competition among other heaters.

TECHNONICOL Corporation produces extruded (extruded) expanded polystyrene using the most modern technologies and the latest equipment, which allows us to produce really high-quality, reliable and durable heat-insulating material. The assortment of the company includes TECHNONICOL XPS of several types, focused on the optimal solution of thermal insulation problems.

XPS TECHNOPLEX, TECHNONIKOL CARBON ECO, TECHNONIKOL CARBON ECO FAS, TECHNONIKOL CARBON ECO SP, TECHNONIKOL CARBON PROF, TECHNONIKOL CARBON PROF SLOPE, TECHNONIKOL CARBON SOLID, TECHNONIKOL CARBON SAND. These types of extruded polystyrene foam differ in terms of compressive strength, water absorption, as well as thermal conductivity coefficients under various operating conditions.

Properly selected extruded polystyrene foam is an effective solution to problems with thermal insulation for many years to come, high savings in heating costs and a guarantee of the durability of structures and structures.

HUNDRED: 72746455-3.3.1-2012

Purpose

XPS CARBON ECO SP is a heater developed by TECHNONICOL Corporation for the construction of insulated Swedish slab (USP) and similar foundations. They are shallow, do not involve the arrangement of the basement, subfloor.

general information

XPS CARBON ECO SP is specially designed for UWB foundations. This is the only insulation of this type, manufactured in Russia. It is characterized by high energy efficiency, durability, resistance to deformation loads. The increased length of the plates simplifies the construction of the foundation.

Carbon nanoparticles are additionally used in production. Extruded polystyrene foam is saturated with them, which increases its energy efficiency and strength. The presence of carbon particles in the material is indicated by its silvery tint.

Advantages

Fast construction. The USHP foundation slab can be assembled in 2-3 weeks. The main communications are integrated into it. The foundation device does not require a deep pit, other labor-intensive work. The insulation protects the soil from freezing, which eliminates the deformation of the foundation on heaving soil.

Energy efficiency. The insulated construction of the foundation slab protects against heat loss through the floors of the first floor. This reduces the cost of heating during the operation of the building. Due to thermal inertia, the surface of the material maintains a constant temperature, even if the ambient temperature changes. In addition, heat-insulating plates in the base protect the house from impact noise, performing the functions of sound insulation.

Reducing the cost of construction. The slab is equipped with a surface that performs the functions of a subfloor. The laying of the floor covering can be carried out without additional preparation; a separate filling of the subfloor is not required.

Durability. The material is not subject to biodamage, moisture (does not rot, does not absorb moisture, does not swell). The foundation is protected from freezing, destruction, moisture. The insulation is resistant to aggressive environments.

Special surface characteristics. It is milled, micro-grooves are additionally made for reliable adhesion with building glue, plaster compositions.

Strength and durability. Service life - from 40 years. The insulation does not deform, does not sag, reliably protects the facade, plinth, wall structure from destruction.

Specifications

* - thermal conductivity measured within 24 hours from the date of production.

Dimensions and logistics parameters

** - CARBON ECO SP boards can be produced using the ThermoBonding method.
*** - in agreement with the consumer, it is possible to manufacture plates of other sizes.

Package

XPS CARBON ECO SP comes with a protective film (UV stabilized). The boards are placed inside the package supported by foam bars.

Storage

The material in its original packaging can be stored under a canopy so that it is not exposed to direct sunlight, rain, snow. Packages are placed on a flat substrate (pallets, bars, etc.).

Guarantees the preservation of the characteristics of the insulation for 2 years, subject to proper storage. If this period has expired, the plates are checked for compliance with the STO and used for their intended purpose.

Compound

XPS CARBON ECO SP - thermal insulation made of extruded polystyrene foam. During production, a blowing agent, carbon nanoparticles, and a number of technological additives are introduced into the composition of raw materials. The material can be supplied with a smooth or milled surface.

The insulation is installed according to the manufacturer's instructions and according to the TECHNONICOL documentation.

Important! The insulation must be protected from fire, not allowed to come into contact with gasoline, organic solvents and bituminous glue that contains them.

Westmet recommends the use of XPS CARBON ECO SP for the construction of "Insulated Swedish Slab" foundations on clay, sandy, sandy loam, loamy, low-bearing or water-saturated soil in the construction of light houses (frame, log, aerated concrete, etc.).

Video

Certificates

In the offices of Westmet, modern materials for facade finishing are available -

TechnoNIKOL XPS - extruded polystyrene foam, heat-insulating building material with an equally distributed cellular-closed structure. The unique formula of a heat insulator endowed the TechnoNIKOL XPS product with the ability to resist the process of water absorption, the material does not swell, there is no shrinkage at all. XPS brand extruded polystyrene foam does not rot, tolerates chemical irritants, does not produce dust and does not support the combustion process.

TechnoNIKOL Corporation has 37 factories. It constantly expands its trading network under its brand, at the beginning of 2018 it is more than 185 branches, in the countries of near and far abroad the company has 33 representative offices. The use of TechnoNIKOL products, during the existence of the concern, made it possible to build more than 200,000 buildings. The organization does not stop there, work is in full swing in laboratories and design shops: products are constantly being improved, new components are being developed to solve specific problems.

Created at the dawn of the 50s of the last century in the laboratories of the American corporation The Dow Chemical Company, extruded polystyrene foam today occupies a leading position among thermal insulation offers on the construction market in terms of efficiency. Application is possible in all areas, from thermal insulation of foundations, roofing, use as flooring, pipeline protection, and ending with the preparation of the base for the construction of railway tracks and highways.

The TechnoNIKOL trademark is recognizable far beyond the borders of our homeland; the company's products based on extruded polystyrene foam are on a par with world brands in the production of thermal insulation. The unlimited use of TechnoNIKOL XPS expanded polystyrene is explained by its unique and worthy characteristics. Valuable properties combined and the product turned out:

• environmentally friendly;
• biologically reliable, actively resists the growth of microorganisms;
• with a low coefficient of thermal conductivity (retains heat better);
• with high strength characteristics (does not crumble with or without);
• service life and durability of use exceeds 50 years.

TechnoNIKOL XPS, the reason for the brand's success

It gained wide popularity (XPS) due to the excellent and main characteristics of the heat-insulating material, namely the coefficient of thermal conductivity. It is this physical parameter that indicates the ability of the structure of a substance to transfer thermal energy (heat exchange) from more heated areas to less heated parts of the body.

The thermal conductivity coefficient of TechnoNIKOL XPS depends on the size and shape of the cells, as well as on the composition of the gas in the cell cells. The low thermal conductivity of the product guarantees high insulating characteristics. That is, the ability of the plate increases XPS reduce energy losses to maintain a comfortable temperature in the building.

A low rate is achieved by reducing each component coefficient in the total value of thermal conductivity coefficients, which includes: solid phase (solid) + foaming gas (r) + convective (k) + radiation (p) components.

λ = λtv + λr + λk + λp.

The proportion of the absolute value of λtv for extrusion is very small. Nevertheless, in the production of TechnoNIKOL XPS, quite a few efforts are made to achieve the structure of the optimal size and shape of the cells. For a quality material, this is a key indicator that determines the strength and thermal insulation properties.

TechnoNIKOL XPS TECHNOPLEX

TECHNOPLEX - was developed mainly for use in private house buildings. It reveals its heat-insulating qualities well in arranging a “warm floor”, in measures for warming balconies and loggias, in laying floor coverings on soil surfaces and in creating cottage foundations.

XPS TECHNOPLEX is widely used as a heat-insulating material in summer cottages. A distinctive feature of XPS TECHNOPLEX is the use of nano-sized graphite particles in the manufacturing process. Nanographite helps to reduce the thermal conductivity of the product and increases the strength characteristics. It is easy to recognize the product on the market by the characteristic light silver tint, acquired as a result of filling the structure with nanographite.

Technical indicators of Technoplex:

Advantages of Technoplex

• The financial benefit is achieved by the best thermal insulation properties per m2, in terms of the comparative use of third-party products;
• Saves thermal energy 1.5 times more efficiently than traditional foam plastic and 2 times more efficiently than basalt and glass wool;
• Does not absorb moisture;
• Not subject to shrinkage;
• There are no formaldehyde resins;
• Does not assist rodents in organizing nests;
• Ease of installation is determined by simple use and contributes to an increase in the speed of finishing work;
• Stable performance indicators are maintained throughout the entire period of operation;
• Thoughtful packaging ensures easy transportation and handling.

TechnoNIKOL XPS CARBON ECO

CARBON ECO - has found wide use in the private sector of low-rise households. It is used in the device of thermal insulation of foundations, roofing, flooring, in the insulation of facade structures.

TechnoNIKOL XPS CARBON ECO is part of a series of heat insulators with increased efficiency parameters. Excellent strength characteristics, combined with low thermal conductivity, are the result of the growing popularity of the use of plates in low-rise and private construction of buildings.

A distinctive feature of TECHNONICOL XPS CARBON ECO the use of nano-sized particles of carbon is considered. Nanocarbon reduces the thermal conductivity of the product and increases the strength properties. Saturation with nanocarbon gives TECHNONICOL products XPS CARBON ECO brightened tone with a silvery sheen. High energy efficiency values ​​are expressed in the following technical characteristics:

Benefits of CARBON ECO

• Wide assortment list;
• Reduced thermal conductivity;
• A reliable product from a biological point of view (does not attract mice and ants);
• Moisture resistant product;
• The plate is devoid of shrinkage, the geometry of the values ​​is stable throughout the entire time;
• Environmentally friendly product without formaldehyde.
• Ease of use;
• Fast assembly activities;
• Operation is defined as 50 years or more.

Brief overview and differences of TECHNONICOL XPS CARBON

XPS TECHNONICOL CARBON ECO SP

A unique product on the domestic market, specially created for the installation of standard solutions for foundations in the form of "insulation with a Swedish plate". The successful use of TechnoNIKOL Carbon Eco in the creation of a foundation is due to the rapid construction of the structure and the increased strength properties of the product:

• Compressive strength limit of 2 percent linear distortion within 200 kPa.
• The bending stiffness is 300 kPa.
• In addition, the product shows high thermal conductivity.

TECHNONICOL XPS CARBON ECO FAS

The specially milled surface of CARBON ECO FAS is the answer for complex façades with . Heat-insulating boards with milling are also used in the basement parts of buildings and other similar structures where it is necessary to ensure high-quality adhesion of the TechnoNIKOL XPS board to the wall plane.

A specially prepared report from the company's masters covers in detail the technological aspects of surface preparation and further. Video review will help to put all the points and teach novice installers with the rules and regulations for the sequence of work with TechnoNIKOL XPS material:

TECHNONICOL XPS CARBON PROF

Widespread use in civil construction:

1. Measures for insulation and insulation of the foundation;
2. Roofing, including structures with load;
3. Flat roofs of swimming pools, stadiums, trade halls and logistics warehouses;
4. Floors, among others with loadable capability;
5. Insulation of loggias, facade structures, basement floors;
6. and etc..

The manufacturer in almost all systematic decisions recommends adopting the products of the TechnoNIKOL XPS CARBON PROF line, promoting the material as insulation for professional builders. TechnoNIKOL carbon prof has high strength and the lowest thermal conductivity.

The XPS CARBON PROF series has a special set of beveled panels TechnoNIKOL XPS CARBON PROF SLOPE, in order to give a slope and make a flat roof pitched.In general, the industrial series is characterized by ultra-high strengthand minimum value of thermal conductivity. It is these parameters that have led to the popular practice of widespread exploitation of the material in the general civil and industrial complex.

TECHNONICOL CARBON SAND MON

Represents extruded polystyrene foam insulation panels intentionally designed to serve as an internal core filler in the sandwich panel industry, as reflected in the name. SAND. The demand for sandwich panels is due to the simplicity of installation activities, products are easy to cut, processing is possible. on machines in order to obtain the required dimensional dimensions.

In production CARBON SAND MON additives are used, the resulting structure, when cutting the product on a string machine, does not create consequences expressed in the translucence of the material through and through. TechnoNIKOL XPS CARBON SAND MON is widely used in monolithic buildings.

TECHNONICOL CARBON SAND PVC

It repeats the technical and physical properties just above the material considered, with the exception of a special filler in the structure component, which allows using CARBON SAND PVC with a greater degree of efficiency as part of filling the inner core of thermal insulators of PVC sandwich panels.

TECHNONICOL XPS CARBON SAND VAN

An extended range of applications is characterized by the use of the material in automotive engineering of the civil and military industries. Sandwich panels of the production cycle of TechnoNIKOL XPS CARBON SAND VAN are manufactured with the purpose of arranging an isothermal container. The car and the body of the refrigerator, all vehicles of the cold-preserving purpose cannot do without CARBON SAND VAN.

TECHNONICOL XPS CARBON SOLID type A and type B

Both types are XPS with an equal distribution of closed cells. Type A and Type B are the same:

• Waterproof;
• Do not swell from exposure to water;
• Show no shrinkage;
• Wear-resistant, chemical-neutral product;
• They do not support putrefactive processes and do not decompose.

Increased strength indicators are successfully involved in the preparation of an even and rigid base for any purpose. Type A is mostly used in the civilian sector of construction sites, usually these are:

• thermal insulation of foundation blocks and fillings
• installation of roofs with subsequent operation,
• industrial floors subject to loading,
• also as part of the manufacture of heat-insulating layers at the base of road surfaces.

CARBON SOLID type B

Meets the requirements of the Russian Federation Certification according to the indicators "Technical instructions for the use of expanded polystyrene and geotextiles during the increase in the density of the main building section of the subgrade in the absence of removal of the rail-sleeper grid". Fully complies with the "Reference Guide for the Use of Polymers in Reinforcement of Ground Coverings during the Organization of Repairs over Communication Lines". In other words, TECHNONICOL XPS CARBON SOLID type B has important tasks and functions in creating heat-insulating layers in railway bases.

Extruded polystyrene foam TECHNONICOL CARBON ECO DRAIN

As we know, the translation DRAIN means a drainage ditch. The manufacturer offers slabs structurally supplemented with drainage grooves to the builders' judgment. The functional purpose of TECHNONICOL XPS CARBON ECO DRAIN is determined by the following features:

• Convincing thermal insulation characteristics;
• Creation of drainage systems to counteract precipitation or groundwater;
• Ventilation ducts on flat and sloping roof surfaces.

TechnoNIKOL PIR

On the “sweet”, take a look at the latest product based on polyisocyanurate foam. According to the laboratory staff, the next generation of PIR boards have a unique, structured honeycomb texture at their disposal. The design of the plate looks like a “sandwich” in the core of which there is polyisocyanurate foam glued on both sides with special layers of foil. Based on the cells with a closed structure and a layer of foil lining, the PIR boards are:

• Completely with waterproof ratio;
• Do not burn and do not support combustion, steadily resist the flame;
• Allow multiple mechanical loads;
• They have a record low coefficient of thermal conductivity.
• PIR products remain with unchanged factory parameters after 50 years of operation.

Advantages of PIR TechnoNIKOL:

Since PIP boards are expected to be widely used in roofing, let's look at some of the advantages of the new approach. The manufacturer on the official website declares guarantees of energy efficiency and durability:

1. PIR materials do not change the geometry of dimensions throughout the entire operation - they do not settle under the pressure of a static or dynamic stress load;

2. New generation PIR heat insulator with no water absorption. TechnoNIKOL PIR simply contains 95% closed cells with a rigid fixation of the structure.

Excellent waterproofing qualities and durable base:

1. Compressive strength from 120 kPa;
2. Tests in 30 cycles of loading have shown loss of durability no more than 0,5%;
3. The risks of damage to the waterproofing layer during installation are minimized.

The material is assigned a flammability value (G1), with this indicator it is allowed to mount the roofing directly on the profiled steel deck. No limitation on surface area. Without fortifying protective measures against fire. The surface will not require the construction of fire cut-offs. TechnoNIKOL PIR does not support combustion processes; moreover, thermal insulation serves as a kind of protection for other layers of the roofing system.

They say that PIR is the best offer of the world industry and behind the product is the main development of future building materials.

Product Description:

TECHNONICOL CARBON ECO extruded polystyrene foam is a heat-insulating material with evenly distributed closed cells.

XPS TECHNONICOL CARBON ECO does not absorb water, does not swell or shrink, is chemically resistant and does not rot. High strength allows you to get a smooth and at the same time rigid base, which significantly increases the life of the entire thermal insulation system.

Application area:

XPS TECHNONICOL CARBON ECO is used in cottage and low-rise construction for thermal insulation of foundations, roofs, floors, facade insulation.

TECHNONICOL CARBON ECO extruded polystyrene foam is one of the most highly efficient heat-insulating materials. High strength and low thermal conductivity determine the popularity of the material in cottage and private construction of houses.

In the production of XPS TECHNONICOL CARBON ECO, nanosized carbon particles are used. Nanocarbon reduces the thermal conductivity of the material and increases its strength. XPS TECHNONICOL CARBON ECO slabs acquire a light silver tint due to saturation with nanocarbon and have high energy efficiency.

Advantages

• Expanded range;
• Improved thermal conductivity;
• Biostability (resistant to insects and rodents);
• Not afraid of moisture;
• Does not shrink over time;
• environmentally friendly material
• Convenient and easy to use;
• High installation speed;
• Stable geometric dimensions;
• Service life over 50 years.

* - can be produced with a compressive strength at 10% linear deformation higher than the values ​​\u200b\u200bspecified in the table, in this case the products are marked with a separate numerical value characterizing the compressive strength of the plate in kPa (for example, 200, 250, 300, 400). At the same time, the values ​​of all other indicators correspond to the values ​​indicated in the table;
** - thermal conductivity measured within 24 hours from the date of production;
*** - slabs of the G3 flammability group are additionally marked with the RF index;
**** - slabs with a thickness of 80 mm or more can be produced using the ThermoBonding method;
***** - in agreement with the consumer, it is possible to manufacture plates of other sizes.

Manufacturing jobs:

XPS TECHNONICOL boards must be used in accordance with the requirements of current building codes and regulations.

Storage:

It is allowed to store XPS TECHNONICOL boards under a canopy that protects them from precipitation and sunlight. When stored under a canopy, the slabs should be stacked on pallets or supports, or bars. It is allowed to store XPS TECHNONICOL boards outdoors in a special package that protects against external atmospheric influences.

Transportation:

Transportation of XPS TECHNONICOL slabs is allowed for a distance of up to 500 km in open vehicles with mandatory protection from the effects of precipitation and sunlight.

Packing Details:

The boards are packed in UV-stabilized film and delivered on pallets.

XPS TECHNONICOL CARBON ECO is the ideal solution for warming your cottage. It does not absorb water, does not swell or shrink, is chemically resistant and does not rot. This is an excellent thermal insulation material for those who are looking for high-quality thermal insulation with high performance.

Thermal insulation material, which is used for the construction of plaster facades, thermal insulation of plinths. It can also be used for other structures where there are increased requirements for adhesion of heat-insulating boards to the base.

Heat-insulating material, which is bars made of high-strength extruded polystyrene foam with a section size of 50x50 mm and a length of 1180 mm. Bars are used to improve the energy efficiency of pitched roof construction.

Product line CARBON PROF

XPS TECHNONICOL CARBON PROF is a material for professional builders. It has high strength characteristics and has the best thermal conductivity in the XPS TechnoNIKOL line. XPS TECHNONICOL CARBON PROF is used for the construction of flat roofs of shopping and logistics complexes, residential areas, foundations of any complexity, loadable roof structures, floors on the ground.

Professional heat-insulating material, which is used in general civil and industrial construction in the construction of foundations, facades, plinths, roofs, floors, including loaded ones.

A set of ready-made heat-insulating wedge-shaped slabs that allows you to create slopes and slopes on the roof on a flat base, increase slopes during roof reconstruction, create a slope in the valley to water intake funnels, at ventilation shafts and skylights, creating an additional slope to divert water from the parapet (counter slope).

Product line CARBON SOLID

TECHNONICOL CARBON SOLID extruded polystyrene foam is a heat-insulating material with evenly distributed closed cells for thermal insulation of loaded floors, thermal insulation of railways and roads. XPS TECHNONICOL CARBON SOLID does not absorb water, does not swell or shrink, is chemically resistant and does not rot.

High strength makes it possible to obtain an even and, at the same time, rigid base, which significantly increases the service life of the entire thermal insulation system. XPS TECHNONICOL CARBON SOLID is a special-purpose material with increased strength.

A high-strength heat-insulating material that is used as a heat-insulation of the bases of transport structures, as well as in general civil construction when constructing a foundation, exploited roofs, loaded floors with increased requirements for the strength of the heat-insulating layer.

High-strength heat-insulating material, which is used as thermal insulation of the bases of railway structures. The material is specially designed for the special requirements that apply to the construction of railway tracks.

Products Carbon Block

Modern technological material that meets all the requirements of road builders.

It is used as a thermal insulation of transport structures, light embankments, as well as in general civil construction when installing thermal insulation of roofs, parking lots and other structures where an increased thickness of thermal insulation is required.

Products CARBONext

Extruded polystyrene foam of the TECHNONICOL CARBONext series is used in general civil construction for thermal insulation of foundations, roofs, floors, including loaded ones, stylobates, and basement insulation.

Line of pipe insulation SEGMENTS XPS

Semi-cylinders and segments of XPS TECHNONICOL are used for thermal insulation of overground, underground channel and channelless pipelines.