Instructions for using the Atlantic water heater. Frequently asked questions about ATLANTIC storage boilers. How long will an Atlantic water heater last?

Electric boilers are good because they are quite simple to use - just connect them to the power supply. In addition, they are safe and effective. The French manufacturer Atlantic confidently holds the lead among manufacturers of this kind of water heaters, offering consumers products of excellent quality and design.

High-quality Atlantic water heater and its advantages

The French company Atlantic, which produces boilers for heating water, is quite popular among consumers. This is accompanied by the fact that this company has been on the market for quite a long time and has proven itself from the best side.

Atlantis heating devices are manufactured in cylindrical and square shapes. These devices are most often used in apartments and private houses.

Benefits of using Atlantic boilers:

Quite affordable price;
Fast water heating;
Corrosion resistance;
Profitability;
A wide selection of models for every taste;
Stylish design that can fit almost any room interior.

However, annual cleaning will help to avoid the latter, for which you can call the master, and the problem will be solved.

Before you decide to buy a water heater of any company, you should understand what they are and understand the nuances of their work.

The Atlantic water tank can be:

horizontal- in this case, the heating element of the device is on the side, and the water inlet pipes are located very close, so the liquid is mixed in the structure itself, which can cause sharp temperature jumps at the outlet. But at the same time, such models are compact and can be placed under the ceiling, thereby not taking up much space.
vertical- costs less than horizontal. The heating element is located at the bottom of the unit, where the cold flow of liquid enters. As a result, the water heats up faster.

Atlantic heaters can have a dry heating element enclosed in a special flask or submersible.

In order not to make a mistake in choosing a unit, you should consider:

The need for a heated liquid, which directly depends on the number of its consumers. For example, the average amount of water for bathing one person in a shower is about 30-50 liters, and it takes about 20 liters to wash dishes and hands.
The power of the device and its compliance with the permissible load of the network. In order for the water to heat up as quickly as possible, models with a power of 2-2.5 kW are often taken. But if you have old wiring in your house, you should not accelerate much. It is better to take a unit of 1.2-1.5 kW, however, the heating time will increase.
The location of the device. If there is not enough free space in the room where the unit is planned to be installed, it is better to choose a horizontal model.
Water quality. If it is too hard, then the tank will often have to be cleaned due to scale appearing on its walls, which reduces the life of the device.

When choosing a water heater, special attention should be paid to the volume of the tank. A 50-liter tank is enough for one person or a couple who are at home mostly in the evening. Tanks of 80 liters are more voluminous and capacious. They are convenient to purchase for a family of 2-3 people, often at home.

The 100 liter boiler can be connected to various liquid supply points, while allowing them to be used simultaneously. This volume is enough for 3-4 people. The instructions will help you figure out how to connect the device.

It is not advisable to purchase equipment in inappropriate places or at points where there are no GOST conformity certificates.

Popular Atlantic water heater: model range

If you decide to purchase an Atlantic boiler, you should study the popular models of these water heaters to determine what you need.

Today there are three common lines of these boilers:

classic– very affordable water heaters. Their design consists of a copper heating element and a magnesium solution in the tank, which prevents corrosion from forming. But, nevertheless, cleaning is still necessary.
Advanced– this series is characterized by a ceramic heating element with an immersion heating element. These models are in good demand among consumers and receive, as a rule, only positive feedback.
Premium– as the name implies, the heaters of this line are available at a higher price. This is due to the presence of a titanium anode, a ceramic heating element and a special anti-corrosion coating in the system.

Like any other equipment, Atlantic boilers can fail. In this case, it is better not to try to do the repairs yourself, but to call a specialist who can competently and quickly fix your equipment.

Boiler Atlantic 80 liters: what is good about dry heating elements

Atlantic water heaters can be both submersible and dry heating elements. Moreover, the latter are considered more popular models. Due to what is this happening?

Advantages of dry heating:

Longer service life - this happens due to the fact that it is enclosed in a special flask and does not come into contact with the liquid, which means it is not affected by it;
Lack of scale on the element;
There is no need to carry out regular cleaning of the device or use any means to improve the functioning of the unit;
The cost of a dry heating element is cheaper than a "wet" heating element.

By the way, if a dry-type heating element breaks down, it will be quite easy to get to it. And you don’t have to spend a lot of time searching for a replacement or repair part.

And yet, despite the undeniable advantages, a water heater with a dry heating element has one drawback - the water in such a boiler heats up quite slowly, since the heating element is located in a separate container, and not in the water.

Features boiler Atlantic (video)

If the quality of the device is in the first place for you, then you should pay attention to Atlantis boilers. They are reliable, durable, comfortable and easy to use. Thanks to a wide range of manufactured models, you can choose exactly the device that you need.

My Atlantic Steatite Slim VM 80 boiler is 3.5 years old. After 2 years, brown liquid came out of the hot pipe, I took it apart to see what and how. It turned out that the anode fell off and raised turbidity from the bottom of the tank (water from my well, despite the filters, a little bit of clay creeps through). Put in place, continue to use. After another 1.5 years, having bought a new anode, I wanted to put it in the EWH. I disassembled the device, and there the anode was completely worn out. I also scooped out a couple of handfuls of husks from the tank - the enamel crumbled, the upper part was already just rusty, there was no enamel. As I understand it, for about six months I have been living with a rusting tank. How long will he last under such conditions - should I already run to buy something new, or is there still six months? A pair of pins - all on one flange - that's what you need! I have it suspended from the ceiling, there is no way to climb from above, from below - all the same pipes and a handle. The thermometer is still useful, as is the regulator - sometimes you need more water - you can (temporarily) turn the thermostat up to the maximum (usually it costs 3/4). You still need to clean it once a year / one and a half, tank or heating element. If there are signs of wear, the anode should definitely be changed.

On the peeling of enamel. You need to figure out the reason. Either there was no safety valve, or there was no (failed) hydraulic accumulator and water hammer occurs when the pump is turned on. In general, you need to check the water supply system. In any case, massive shedding of enamel indicates the presence of excess pressure inside the water heater.

On the storage water heater Atlantic 80 liters of heating element, as I understand it, 2 kW? This is good. And what do they write about additional protection? Judging by the advertisement, some potential is brought to the anode. Is it electrochemical protection? Tell me one more thing - how safe is it to raise the temperature to the maximum?

The factory setting on most thermostats is set to 70-75 degrees. Over time, it changes in a big way. There is an opinion that heating at the maximum temperature is bad. I believe that you need to heat the way you want. For that, she and the technique to exploit it. In addition, the higher the water heating temperature, the less bacteria are bred inside the water heater.

I have an Atlantic Steatite Cube VM 100 S4CM storage boiler, a steatite (dry) heating element. Dual mode 1.2kw and 2.4kw. It has 2 thermostats: protective and regulating the heating temperature. Worked for 2 years in 2.4 kW mode at maximum heating. Breakdown: at first, the protective thermostat began to knock out. Then the attachment point of the neutral wire melted in it. Replaced the thermostat with a new one. Now, in the 2.4 kW mode, the mounting wires are very hot inside, both are zero and phase. In the 1.2 kW mode, they do not heat up. Copper wires 4 squares go from the 16A machine to the boiler. These wires don't get hot. What could be the reason for overheating of the wires inside the unit, given that the contacts are all connected tightly, not loose?

We, unfortunately, do not have the opportunity to advise on such highly technical issues remotely, since it is necessary to check everything on the spot, it is recommended to call the master.

I have an Atlantic electric water heater of 50 liters, it has worked perfectly since 2007, but one evening I noticed that water was dripping from it. Advise how this can be fixed (if possible), or call specialists?

If the gasket is leaking, replace it.

Boiler Atlantic Round Standard 50. The problem is that it heats the water to strong boiling water and for some reason does not turn off automatically for about 4 hours. The temperature sensor on the case indicates more than average, although it is set to a minimum. Is this the norm? Or broken thermostat?

No, this is not the norm, most likely the problem is in the thermostat, but other malfunctions are possible, for example, the temperature sensor could fail. An examination is necessary for an accurate diagnosis.

Is it possible to connect an electric boiler and an Atlantic 80 liter boiler in one bundle? Theoretically, I myself understand that I can’t do this when I looked at the connection diagram. Why do I want it? So that all the electrics are connected in one place, and the boiler controls the process of heating itself and the water heater. For example, you need to set the heating time for the boiler, and at this time the boiler turns off the heating and heats the EWH at full power.

This is an electric water heater. It can be "connected" to the boiler only by wires. In a sense, both he and the boiler have a certain electrical power. Boiler you are planning 6 kW, EWH - 2.4 kW. Do you have these allocated 10 kW (at least turn on the kettle) of electric power? There is an option to heat hot water in an indirect heating boiler using an electric boiler. Double benefit - and the allocated power is needed less and the water heats up much faster.

If water flows from under the inner blue plastic, which includes a cold water pipe, what should be done in this case? Boiler Atlantic series Opro VM 100.

The exact location of the leak must be pinpointed, pipes and connections can be replaced, repairing a tank leak is generally not cost effective and short lived. If the leak is not large, condensation is possible.

Tell me, does the Atlantic Vertigo Steatite 50 model have an overpressure relief valve? And is there a heating indication, a light that lights up when the water heating process begins, and goes out after the heating element is turned off. I just heard about water heaters exploding, and you need to watch this on / off indicator. heating element (TENA). And yet, if this heater is used only in summer, and occasionally in winter (for example, on New Year's holidays) and after draining all the water with the device disassembled, is there still a high probability of a breakdown?

Safety valve included. There is an indicator light that will show you if the machine is heating up or not. For the winter, you will have to disassemble and drain the water, otherwise it will not drain completely.

Atlantic Steatite Slim VM 80 l. and Elite 80 l. differ among other things in power and the presence of a magnesium anode in Slim. As far as I understand, with a dry heating element, the absence of a magnesium anode is not critical. But the power for a country house is better to be smaller, about 1500, so as not to bounce?

The presence of the anode is mandatory, the tank is steel and enamelled. The manufacturer requires checking the condition of the anode every 1.5-2 years. The question is whether it will survive or not. You need to look at how much power is allocated to the house and count the entire connected load.

I want to buy an electric storage water heater Atlantic 100 liters S4CM. What can you say about it?

Dry heating element, 7-year warranty for the tank, 2-year warranty for the electrics. Ideal for hard water.

At the dacha (one small house) there is a pumping station. Thresholds of its maintenance of water from 2 to 3 atmospheres (on - off). I installed an Atlantic Ego 50 boiler. It had been with my brother for a long time, but was rarely used. The unit is working. The check valve was checked and cleaned - it is working. Unfortunately, there is no passport for it, but judging by the brackets, it can be installed both vertically and horizontally. I installed it vertically, the top inlet on the boiler with a blue end (with a check valve I connected the cold water inlet to it), the bottom one with a red ring (direct hose to water outlets). The rings on the boiler are non-removable, i.e. no one mixed up their places. The nameplate on the device with markings and other data in this position is read directly, which also indicates its correct position. On the bottom of the unit there was a temperature controller with an indication of inclusion (a mechanical thermostat and a neon indicator lamp) and a cord for connecting to an outlet. That is, logically, turning it upside down contradicts the meaning (it is impossible to regulate and the indication is not visible). But then it turns out that it has an upper inlet for cold water, and a lower outlet for hot water. When the mixers are closed (even the taps on the water outlets are all closed), when the device is heated after 2-3 hours, the cold line heats up very much. Even the high-pressure hose of the pump that goes into the well overheated. During subsequent control, purely visually by hand, the inlet of the cold hose is even hotter than the outlet of the hot one. Questions: Is this unit universal (vertical-horizontal)? If it is vertical, then, contrary to logic, should it be set up with an indicator and a regulator (so that the blue water intake is from below)? Or is it still horizontal? Or do you need to add something else?

Is the valve itself correct? If it is serviceable, and installed correctly, in any case, hot water should not pass through it. Well, maybe a little, if it works. The model is vertical, indicator and regulator from below. It is necessary to completely fill the device (faucets are needed for both nozzles), disconnect from the system and open both taps. From the first it will gush globally, and into the second it will suck in air. The first is the cold water inlet, the second is the hot water outlet.

What is the device and principle of operation of the storage water heater Atlantic Steatite Exclusive 200?

Conventionally, all models, the installation of which is more correct to entrust to specialists, can be divided into two types: "Dry" - steatite heating elements in flasks "Wet" - copper heating elements without flasks.

How do "dry" steatite heating elements differ from steel tubular heaters, which are used by other manufacturers in "dry" models?

Steatite is an ideal natural material for electrical equipment. It has very high physical characteristics, mechanical strength and stability. Steatite withstands temperatures above 1000C, does not burn and has excellent thermal conductivity. Compared to steel heaters, steatite elements have a large heat transfer area, which allows them to heat water faster. They heat up almost instantly and cool down for a long time, which favorably affects the energy efficiency of EWH.

How many liters of hot water comes out of the Atlantic water heater 100 liters?

When water is taken from a hot tap at the place of consumption, the volume of water heated to the maximum temperature will be about 3/4 of the total volume of the device. The remaining 1/4 part is water from the layer where the heated water is mixed with the incoming cold water. The amount of outgoing hot water depends on the intensity of the flow through the EWH and the temperature of the incoming water.

Why does the heating time increase during the cold season?

This is due to a decrease in the temperature of the incoming cold water supply.

What is the maximum hot water temperature?

The maximum heating temperature is 63±30 C.

Why is there no scale on the temperature gauge?

The temperature gauge is designed to display the process of heating or cooling water in the device. It is not an accurate measuring instrument.

Do I need to disconnect the Atlantic 50 liter boiler from the mains after each heating?

No. The unit operates in automatic mode. When the temperature set on the thermostat is reached, the contact opens and the voltage is removed from the heating element, the device turns off. When cooling, the contact closes and voltage is applied to the heating element.

What is the energy consumption of the Atlantic Vertigo Steatite 100 electric water heater?

The amount of electricity consumed depends on the intensity of operation of the device, as well as the temperature of the cold liquid entering it.

What is the purpose of the safety valve in the Atlantic model for 80 liters? Why is it dripping?

The safety valve is designed to prevent liquid from flowing out of the tank in the absence of it in the cold water supply riser, as well as to relieve excess pressure that forms in the tank when the heated water expands. The pressure is released by dropping a small amount of it from a special hole when the pressure in the tank reaches 8 atm. Installation of the valve from the set to the device is obligatory.

How much volume can drain from the relief valve vent on the Atlantic Steatite Elite 80?

It depends on the intensity of operation - the more often the device is turned on in heating, the more liquid will be discharged. It also depends on the pressure in the cold water supply riser - the higher the pressure in the riser, the less time it takes to reach the pressure in the tank, at which the discharge occurs.

The Steatite Cube 100 model is in operation. Why is a magnesium anode needed and why should it be periodically replaced?

The purpose of the magnesium anode is to increase the reliability and improve the operating conditions of the unit by protecting the steel tank from corrosion and preventing the formation of a dense scale deposit on the copper heating element. The protection of a steel tank from corrosion lies in the fact that during the electrochemical interaction of several metals in an aqueous solution, corrosion of a metal with a lower electrode potential occurs. In the device, the copper heating element has the highest potential, then comes the steel tank and then the magnesium anode, which undergoes destruction (corrosion). With the complete destruction of the anode, the steel tank undergoes corrosion. That is why the spent magnesium anode must be replaced with a new one in a timely manner.

What is the frequency of replacing the magnesium anode for the Atlantic boiler?

Replacement interval for model N4E, N4, PC, S3S, D400-1-M, Round VMR, Delfa N4L, Aston, Welcome - 12 months. When using the device in production, in the service sector and catering places - 6 months.

Atlantic is a French brand that was founded in 1968 in the metropolis of La Roche sur Yon in the Vendée region. At the beginning of the path to success, only a few products were present in the company's catalog, but today on the official website you can find an Atlantic storage water heater with a dry or wet heating element, as well as a variety of functions.

Way to success

The company's policy is based on long-established priorities, which today are considered the basis for a strategic vision of the intensity of the company's development.

Efficiency. Atlantic strives to provide consumers with the most suitable equipment options that combine good quality, high usability and affordability.
Relevance. The company offers customers only modern equipment, manufactured using innovative technologies, taking into account all the needs of users.
Wide coverage. The company seeks to expand its horizons by opening new divisions in different countries. Now it works in more than 60 states. At the same time, Atlantic has the goal of adapting its products as much as possible to the needs and individual operating conditions of each country.

Key dates for the development of the Atlantic brand:

1968 - opening of the company;
1972 - release of the convector;
78 - production of an electric boiler;
91 - manufacture of infrared heaters;
2006 - entering the technical market of heat pumps and solar water heaters;
2012 - a new line of Atlantic electric boilers with wet and dry heating elements.

The company annually launches innovative developments into production. The result is safe, practical and reliable domestic equipment. The range of the company includes a wide variety of equipment, including:

Atlantic water heaters;
heat pumps;
solar boilers;
heated towel rails, etc.

The environmental approach of the enterprise is more focused on reducing the release of toxic and harmful substances into the atmosphere. Therefore, taking into account many years of experience in working with varieties of energy, the company has focused on the development of the industry for the production of equipment that runs on natural energy sources.

Rating of the best Atlantic water heater models

Despite the wide variety of Atlantic boilers, consumers of the product have identified several models that are distinguished by the best performance.

Atlantic Standart Round 50 l

The model is installed directly on the wall in a vertical position. The power of the Atlantic Round 50 water heater is 1.5 kW, there is 1 open heating element in the design. The user of this device has the ability to independently set the temperature with a regulator hidden under the cover.

Atlantic Standart Round 50 l

The tank of the device holds 50 liters of water. It will take up to 2.5 hours to fully heat this volume. The inside of the container is covered with stainless steel material. The device itself is made in a cylindrical shape. It has a magnesium anode and an overpressure safety valve. The Round 50 electric water heater has relatively large dimensions of 55.9x43.3x45.1 cm and weighs 15 kg. The cost is 5000 rubles.

VIDEO: Overview of Atlantic Standard Round 50 L

This is a floor version that is mounted in a vertical position. Its power is 2.4 kW, which is enough for uniform heating of water in a volume of 200 liters. The heating mode is adjusted by a mechanical temperature controller, which is hidden directly under the lid. The design of the Atlantic water heater contains a dry heating element, which is a guarantee of a long service life.

Atlantic Steatite Exclusive 200

To warm up all the water, the device will take at least 4.40 hours. The inside of the tank is covered with high-quality glass-ceramic, which is applied by electrostatic method. The cylindrical device operates from a power source with a voltage of 220 or 380 volts. The nominal heating rate does not exceed 65 ° C, while the heat loss per hour is 1.8 kW. The dimensions of the model are 125.8x57.5x59.8 cm, the storage electrical device weighs 58 kg, and costs 42,000 rubles.

This is an Atlantic Vertigo Steatite 50 water heater with a modern and stylish design, also with a rectangular shape. The device has a power of 2.25 kW, while it is divided into 2 hidden dry type heating elements. On the body there is an open heating regulator. It takes only 2 hours to heat water to an average temperature.

Atlantic Vertigo 50 040 F220-2-EC

The inner tank is made of stainless steel material, it is made by Double Tenk Technology. There is an intelligent display, as well as a Smart system that determines the habits and needs of users. The maximum heating temperature does not exceed 70°C. The dimensions of the device are 76.5x49x31 cm, including fasteners, the weight of the model is 25 kg. The cost is 14900 rubles.

VIDEO: Atlantic Vertigo 50 040 F220-2-EC performance review

Atlantic Vertigo 80

The model with a double dry heating element and a capacity of 65 liters has a total power of 2250 watts. This device takes 3.32 hours to heat the liquid. The inner area of the boiler is made of steel material, and the tank is also covered with durable enamel with a high content of zirconium, which is a guarantee against rust at any time of operation.

Atlantic Vertigo 80

From above the tank is covered with harmless and environmentally friendly polyurethane foam. The dimensions of the model are 115x54x34 cm, the device weighs 33 kg. Price - 17800 rubles.

VIDEO: Atlantic Vertigo 80 Review

Atlantic 80 liters with a dry heating element has two steatite heating elements, which contributes to the rapid heating of a large volume of water. On the control panel of the device there is a mode knob, as well as a touch key for launching the Boost accelerated heating function.

Atlantic Vertigo 100 MP 080 F220-2-EC

The novelty has a flat body, made in a modern style. Due to the small width of 31 cm, the model can be successfully placed in a small room. The heater may be installed both vertically and horizontally. The price of the device is 19,000 rubles.

VIDEO: Atlantic Vertigo 100 MP 080 F220-2-EC Review

Problems and malfunctions of Atlantic water heaters

French water heaters have several weaknesses:

check valve leakage - replacement is required;
frequent replacement of the magnesium anode;
scale on the heating element already in the first year of operation.

Please note that the equipment is assembled at several factories, so the quality of even the same model can vary significantly.

All breakdowns can be fixed at home, but it is better to do this in a service center. If the equipment is still under warranty, it is strictly forbidden to interfere with its work.

VIDEO: TOP Atlantic problems - it doesn’t heat, but the light is on, the water smells bad, the valve leaks, etc.

Atlantic water heaters - Tips for operation, repair and troubleshooting

I want to buy an electric storage water heater Atlantic 100 liters S4CM. What can you say about it?

Dry heating element, 7-year warranty for the tank, 2-year warranty for the electrics. Ideal for hard water.

We, unfortunately, do not have the opportunity to advise on such highly technical issues remotely, since it is necessary to check everything on the spot, it is recommended to call the master.

If the gasket is leaking, replace it.

If water flows from under the inner blue plastic, which includes a cold water pipe, what should be done in this case? Boiler Atlantic series Opro VM 100.

At the dacha (one small house) there is a pumping station. Thresholds of its maintenance of water from 2 to 3 atmospheres (on - off). I installed an Atlantic Ego 50 boiler. It had been with my brother for a long time, but was rarely used. The unit is working. The check valve was checked and cleaned - it is working. Unfortunately, there is no passport for it, but judging by the brackets, it can be installed both vertically and horizontally. I installed it vertically
the upper input on the boiler with a blue end (with a check valve connected the cold water inlet to it), the lower one with a red ring (direct hose to water outlets). The rings on the boiler are non-removable, i.e. no one mixed up their places. The nameplate on the device with markings and other data in this position is read directly, which also indicates its correct position. On the bottom of the unit was a temperature controller with an indication of inclusion (a mechanical thermostat and a neon indicator lamp) and a cord for connecting to an outlet. That is, logically, turning it upside down contradicts the meaning (it is impossible to regulate and the indication is not visible). But then it turns out that it has an upper inlet for cold water, and a lower outlet for hot water. When the mixers are closed (even the taps on the water sockets are all closed), when the device is heated after 2-3 hours, the cold line heats up very much. Even the high-pressure hose of the pump that goes into the well overheated. During subsequent control, purely visually by hand, the inlet of the cold hose is even hotter than the outlet of the hot one. Questions: Is it a universal unit (vertical-
horizontal)? If it is vertical, then, contrary to logic, should it be set up with an indicator and a regulator (so that the blue water intake is from below)? Or is it still horizontal? Or do you need to add something else?

What is the device and principle of operation of the storage water heater Atlantic Steatite Exclusive 200?

How do "dry" steatite heating elements differ from steel tubular heaters, which are used by other manufacturers in "dry" models?

Steatite is an ideal natural material for electrical equipment. It has very high physical characteristics, mechanical strength and stability. Steatite withstands temperatures above 1000C, does not burn and has excellent thermal conductivity. Compared to steel heaters, steatite elements have a large heat transfer area, which allows them to heat water faster.
They heat up almost instantly and cool down for a long time, which favorably affects the energy efficiency of EWH.

How many liters of hot water comes out of the Atlantic water heater 100 liters?

Why does the heating time increase during the cold season?

This is due to a decrease in the temperature of the incoming cold water supply.

What is the maximum hot water temperature?

The maximum heating temperature is 63±30 C.

Why is there no scale on the temperature gauge?

The temperature gauge is designed to display the process of heating or cooling water in the device. It is not an accurate measuring instrument.

Do I need to disconnect the Atlantic 50 liter boiler from the mains after each heating?

What is the energy consumption of the Atlantic Vertigo Steatite 100 electric water heater?

The amount of electricity consumed depends on the intensity of operation of the device, as well as the temperature of the cold liquid entering it.

What is the purpose of the safety valve in the Atlantic model for 80 liters? Why is it dripping?

How much volume can drain from the relief valve vent on the Atlantic Steatite Elite 80?

It depends on the intensity of operation - the more often the device is turned on in heating, the more liquid will be discharged. It also depends on the pressure in the cold water riser - the higher the pressure in the riser, the less time it takes to reach the pressure in the tank, at which the discharge occurs.

The Steatite Cube 100 model is in operation. Why is a magnesium anode needed and why should it be periodically replaced?

The purpose of the magnesium anode is to increase the reliability and improve the operating conditions of the unit by protecting the steel tank from corrosion and preventing the formation of a dense scale deposit on the copper heating element. The protection of a steel tank from corrosion lies in the fact that during the electrochemical interaction of several metals in an aqueous solution, corrosion of a metal with a lower
electrode potential. In the device, the copper heating element has the highest potential, then comes the steel tank and then the magnesium anode, which undergoes destruction (corrosion). With the complete destruction of the anode, the steel tank undergoes corrosion. That is why the spent magnesium anode must be replaced with a new one in a timely manner.

What is the frequency of replacing the magnesium anode for the Atlantic boiler?

Replacement interval for model N4E, N4, PC, S3S, D400-1-M, Round VMR, Delfa N4L, Aston, Welcome - 12 months. When using the device in production, in the service sector and catering places - 6 months.

__________________________________________________________________________

_______________________________________________________________________________

OPERATION AND REPAIR OF BOILERS

Proterm Panther Proterm Skat Proterm Bear Proterm Cheetah Evan
Ariston Egis Teplodar Cooper Atem Zhitomir Neva Lux Arderia Nova
Thermon Immergas Electrolux Conord Lemax Galan mora

Categories

Popular