Boiler error codes ariston bs 24 ff. Overview of the functions of the boiler Ariston BS24FF. Nominal gas pressure, mbar

1. Pipe for the exit of combustion products
2. Pressure switch
3. Condensate trap
4. Primary heat exchanger
6. Temperature sensor on the flow to the heating circuit
7. Burner
8. Ignition electrodes
9. Gas valve
10. Ignition device
12. Heating circuit safety valve (3 bar)
13. Secondary heat exchanger
14. Drain valve

16. Make-up tap
17. Heating circuit filter
18. Circulation pump with air vent
19. Relay min. Pressure
20. Temperature sensor on the return from the heating circuit
21. Three-way valve actuator
22. Flame control electrode
23. Heat-insulating panel of the combustion chamber
mineral fiber
24. Combustion chamber
25. Expansion tank
26. Fan
27. Point of analysis of combustion products

Hydraulic circuit

1. Fan
2. Primary heat exchanger
4. Water temperature sensor on the supply to the heating circuit
5. Burner
6. Ignition electrodes
7. Gas valve
8. Secondary plate heat exchanger
9. Safety valve 0.3 MPa (3 bar)
11. Automatic bypass
12. Drain valve
13. Make-up tap
14. Heating circuit filter
15. Flow sensor in the DHW circuit
16. Three way valve
17. Pressure gauge
18. Relay min. Pressure
19. Circulation pump with automatic
air vent
20. Flame control electrode
21. Expansion tank
22. Water temperature sensor on the return line of the circuit
heating
23. Flue gas pressure switch (pressure switch)

The Ariston trademark, under which high-quality household and, in particular, heating equipment is produced, is today the property of the Italian concern Indesit Company. This brand combines the proven traditions of the past with the innovations of the future. All this makes Ariston appliances the perfect solution to ensure maximum comfort in your home.

Currently, the production divisions of Ariston and Hotpoint are combined into one functional structure. The result is a joint trademark, which is steadily gaining momentum in popularity both in Europe and in Russia.

A special place of honor among the assortment of Hotpoint-Ariston is occupied by water-heating boilers, which, perhaps, are the pride of the Italian company. Units supplied to the world market are distinguished by ergonomics and stylish design. It would seem, how can you make an ordinary design not only functional, but also visually attractive? Italian engineers from Hotpoint-Ariston were able to do this.

The undoubted advantage of Hotpoint-Ariston boilers can also be considered that they are distinguished by a high level of safety and ease of everyday use. They are also distinguished from competitors by their quiet operation, which is also very important, especially when installing heating equipment in a small apartment, where every sound can cause discomfort.

Hotpoint-Ariston designers strive to diversify the appearance of the proposed structures as much as possible, so that the buyer has the opportunity to choose exactly the model that harmoniously fits into the concept of a particular interior. Now it is not at all necessary to hide the water heating unit in a specially designated place, since the Hotpoint-Ariston boiler looks very stylish and concise.

The technique of the Italian brand is a unique combination of elegance, reliability and manufacturability. An important plus of Hotpoint-Ariston boilers is their environmental safety. And although this quality is not valued by the Russian consumer as highly as by the European, the loyal attitude towards the environment confirms the manufacturer's desire for continuous improvement of each unit of the model range.

Ariston has a lot of achievements in its long history. Founded in the 1930s as a family business, today it can safely be called one of the leaders in its industry. Today, products offered under the Ariston brand rank third in their market segment in terms of sales. The main activity of this functional division of Indesit is the production of household appliances of the medium and high price segment.

If we talk about heating equipment offered on the domestic market under the Hotpoint-Ariston brand, then first of all it is worth mentioning BS type water heating boilers. It is this technique that is in deserved demand all over the world, due to its efficiency and performance. At the same time, each of the models in the BS line has small dimensions and weight, which greatly facilitates the process of their transportation and installation. An obvious plus of these heating boilers is also that they are equipped with separate heat exchangers. Separately, it is worth mentioning the reliability of the built-in hydraulics, which can withstand aggressive operating conditions without any problems.

Let us consider in more detail the most popular modification of equipment in this line - the boiler Ariston bs 24 ff

The gas boiler Ariston bs 24 ff is a high-performance wall-mounted 2-circuit type unit that can be used simultaneously for hot water and heating. Among the proposals on the market, this equipment can be considered the most attractive, since it combines technical excellence, durability and affordable price.

Experts recommend installing Ariston bs 24 ff as a universal means for heating apartments and private residential buildings. This technique makes it possible to significantly reduce the cost of the family budget for heating, when compared with the central water supply system. By purchasing an Ariston bs 24 ff boiler, you can forget about the cold weather even at unusually low temperatures outside the window. Italian brand equipment is able to maintain comfort in your home at all times.

Among the advantages of the Ariston bs 24 ff model, the following are worth noting:

• Adaptability to work in difficult Russian conditions. The technique easily copes with lowering the gas pressure in the system to a level of 5 mbar. In addition, the boiler continues to function even with water pressure drops in the circuit, which is also very important for our country. Ariston bs 24 ff is adapted to power surges due to the presence of a special protection system.
• The boiler is able to maintain operation even at very low temperatures outside the window (up to -52 degrees Celsius).
• The presence of an analog control panel, which displays the temperature of the coolant in the system.
• The possibility of distributing the intensity of the heating system without affecting the water heating system.
• Electronic flame modulation.
• Protection of the boiler against scale.
• Pump blocking prevention system.
• Prevention of freezing of the coolant in the system in case of a decrease in the air temperature outside the window.
• Ariston bs 24 ff is able to independently diagnose a problem and adequately respond to its occurrence.

The Ariston boiler will delight the buyer with the presence of a copper heat exchanger and a secondary plate heat exchanger made of stainless steel. The specialists of the manufacturing company took care of the durability of the equipment, equipping it with a durable stainless steel burner that can maintain stable operation for decades.

As additional structural advantages, it is worth noting the elements of the hydraulic system made of durable materials, a 3-way valve with a drive, two temperature sensors and two filters for mechanical cleaning of the coolant.

Ariston bs II 24 ff

Ariston bs II 24 ff is a reliable 2-circuit wall-mounted gas boiler with a closed firebox. A separate heat exchanger increases the efficiency of the entire system and extends the life of the equipment. The useful power of this unit is 25 kW, which is enough to heat an apartment or a small country house, the area of ​​\u200b\u200bwhich does not exceed 240 square meters. At the same time, the maximum temperature of the coolant in the heating system reaches 85 degrees Celsius.

The equipment is highly productive. Ariston bs II 24 ff is capable of producing 13.6 liters of hot water per minute at a temperature of 25 degrees. And the efficiency reaches 93%. For this class of equipment, such a high efficiency is a worthy indicator.

The device is easy to install, so it is not necessary to entrust this task to specialists. If you are confident in your own skills and want to mount Ariston bs 24 ff on your own with the instructions that come with the equipment, you can easily do it.

But do not forget that an experienced specialist with one hundred percent probability will be able to install the equipment without any errors, which will protect you from the possible withdrawal of equipment from warranty service, which the manufacturer has every right to do in case of violation of any standards. The instructions for Ariston bs 24 ff are clear and comprehensive enough for the wizard to cope with the installation without problems.

The Italian brand Ariston, behind which the well-known global manufacturer of household appliances Indesit Company is hiding, has been designing and manufacturing gas heating boilers since the mid-70s of the last century.

A subdivision of Indesit Company is the Ariston Thermo Group, whose gas boilers have gained popularity due to the intensive individual construction of residential buildings, as well as the unsatisfactory performance of central heating systems in apartment buildings.

In this review, we will look at some models of this brand, as well as their technical abilities. Instructions for use will be attached below.

Double-circuit wall heating systems

The variety of models from the Ariston trademark is quite large, but a review of Ariston gas boilers shows that the most popular is the line of double-circuit units. It assumes both hot water supply and space heating from one energy source. When installed in apartments or private houses with a total area of ​​up to 100 sq. m. most often purchased the following models, presented in the table below.

Instructions for double-circuit gas boilers Ariston are usually purchased along with all elements of the heating system. If you lost it, it does not matter, a little below is a brief instruction that will help you carry out daily management operations. It should be noted that, despite the lower gas consumption, the BS24FF model is a more advanced solution in terms of its operational capabilities. So instructions.

1. For the first start, you must first make sure that there is air access to the room, ventilation is provided.
2. Check the water pressure - it should be between 0.6-1.5 bar. Too low pressure requires feeding the circuit - for this you need to open the tap from the bottom of the boiler.
3. Often a drop in pressure indicates that water is leaking from the system. This requires a wizard call.
4. Switching on is simple - by pressing the on / off button.
5. It is possible to select the "Winter" or "Summer" mode - respectively heating + DHW or only DHW.
6. Using the regulation buttons, you can set the temperature of the coolant from 35 to 82°C and hot water - from 36 to 56°C.
7. Turning off the boiler with the on / off button leads to the activation of the anti-freeze mode. If you want to turn off the boiler completely, you need to turn the external switch to the off position, unplug the boiler from the socket and close the gas cock.

The instruction for the gas boiler Ariston BS24FF notes the differences in the types of combustion chambers. She indicates, in particular, that the presence of an open combustion chamber can lead to a lack of oxygen in the room where such a unit operates. Therefore, the useful area of ​​\u200b\u200bthe kitchen, where products with an open combustion chamber are most often installed, should be much larger than in the previous case. Otherwise, it will cause a malfunction.

The efficiency also decreases somewhat. This is mainly due to the fact that boilers with a closed combustion chamber pump the air necessary for the operation of the fuel-burning device directly from the external atmosphere, heating it along the way, which helps to reduce gas consumption.

The instruction of wall-mounted gas boilers Ariston also notes their compactness and ease of installation. At the same time, the Uno 24FF model is designed for relatively small apartments or houses, while more productive options, for example, from the Clas series, are more suitable for installation in large mansions.

Features of operation of the Uno 24FF model

The instruction of the gas boiler Ariston Uno considers in detail all issues related to the normal operation of the equipment, has the following advantages:

• advanced design of the heat exchanger with a developed heating area, which is the reason for the high efficiency of the boiler;
• available for control automation of the work process, which provides for the "summer" and "winter" modes of operation of the equipment;
• blocking the operation of the fuel-burning device, which excludes the failure of the unit in case of interruptions in the supply of water and / or gas;
• constant control of the temperature of water heating in both circuits due to the built-in temperature sensor that controls the operation of the circulation pump;
• precise settings of the parameters of the hydraulic and gas systems of the boiler;
• reliable coaxial type chimney, which ensures timely and high-quality removal of combustion products.

The instruction manual for the Ariston gas boiler provides an overview of possible malfunctions, one of the most reliable in its class.

Features of operation of the BS24FF model

What does the instruction for the Ariston gas heating boiler say? As you can see, this is a more modern design solution for this type of technology. Its main features are listed below.

1. Profitability, which is most evident when used in apartments or houses of a relatively small area.
2. Unique hydraulic components of the unit, which ensure complete safety of its operation. In particular, the built-in gas supply regulator can be set to any power consumption mode.
3. The affordability of the price creates the possibility of acquiring such a product for almost any potential consumer.
4. The BS24FF boiler is fully adapted to domestic operating conditions, including reduced energy carrier pressure in the supply networks, possible voltage drops and low outdoor temperatures.
5. The presence of high-precision diagnostic equipment minimizes the risks of premature failure of the boiler, while expanding its operational capabilities, for example, when installing thermostats in heated rooms.

As a result, reviews about the Ariston gas boiler are mostly positive. It is characterized by a steady demand in the profile segment of the home heating equipment market. The price range of the products in question is from 16,000 rubles. (for the Uno24FF model) up to 39,000 rubles. (for model BS24FF). The price difference is felt in the constructive reliability of the equipment.

Troubleshooting for models of this brand

Despite all the efforts of manufacturers, periodic repairs to such intensively used products are inevitable. As with other systems of this class, possible problems are considered in the instruction manual. For double-circuit gas boilers Ariston, the most common malfunctions are as follows.

1. Deterioration of gas supply. More typical for the gas boiler Ariston Uno - the malfunction manifests itself in the clogging of the gas burner, which operates in less favorable conditions than the fuel-burning device of the BS24FF boiler. This requires a thorough cleaning or flushing of the nozzles.
2. Lack of ignition of the burner when gas is supplied. Due to the presence of control automation, this malfunction is associated with a break in the gas valve windings. You can check this using the test value of the resistance of the coil winding, which is 5.8 kΩ for the primary winding and 19.2 kΩ for the secondary.
3. Unsatisfactory gas flow through the burner, which causes its periodic shutdown. The cause may be a clogged gas supply valve or a broken membrane. Components and parts must be replaced at a service center.
4. Increased noise during operation of the boiler (mainly found in products of the Uno24FF model). The reason is the breakage of the modulator spring, which as a result begins to make vibrating sounds. Depending on the severity of the breakdown, either the spring or the modulator itself will have to be changed.

An analysis of these breakdowns indicates that during the operation of the Ariston BS24F gas boiler, malfunctions are more rare. At the same time, in order to extend the service life of the equipment, it is also necessary to periodically check the chimney system, the quality of electrical connections, their grounding, the condition of the chimney pipes, the reliability of ventilation in the room where this equipment is installed, and also strictly follow the rules for operating the equipment.
When these requirements are met, modern and aesthetic externally gas boilers Ariston BS24FF and Uno24FF will reliably perform their functions for many years.

BS gas heating boilers are the best equipment for those who understand economy. The 24 kW wall-mounted boiler for heating and hot water supply is compact in size, light in weight, has two reliable separate heat exchangers and a unique hydraulic group.

The new equipment is distinguished by an affordable price, which makes it an extremely attractive product on the heating market.

Recommended for apartment heating and hot water supply in high-rise city buildings. Its use will reduce the cost of each consumer for heating (in comparison with the existing central heating) by about 2-3 times. Having your own boiler, you decide when and what temperature it needs to maintain in the apartment. Individual comfort, perfect value for money!

Main benefits:

fully adapted for Russia - work at reduced gas pressure (up to 5 mbar), low pressure and water flow;

resistance to voltage drops;

built-in condensate collector;

operation at low outdoor temperature (up to -52°С)

analog control panel with temperature display

the possibility of reducing the power for heating (with the same power for hot water) and the function of switching on delay

function of continuous electronic modulation of the burner flame

anti-freeze, scaling and blocking functions of the circulation pump and 3-way valve

self-diagnosis function

primary heat exchanger made of copper with a protective coating,

secondary stainless steel plate heat exchanger

durable stainless steel burner with safety feature

heavy-duty composite hydraulic group, motorized three-way valve

2 ultra-precise ntc temperature sensors

2 mechanical cleaning filters - in the heating and hot water circuit

expansion tank 8 l.

self-diagnosis function

Possibility to connect t-control and room thermostat