Crafts for giving from unnecessary things. Crafts for giving from unnecessary things What to do from trash

Old things that have accompanied us for some part of our lives cannot be thrown away so easily. You get used to them, and it seems that they must definitely come in handy. Maybe at least some of the items dear to the heart really should not be parted? Postponing the final decision on the back burner, we take everything unnecessary to the garage or to the country. So, so that your country house does not eventually turn into a place of accumulation of various rubbish, we advise you to immediately come up with a new life for old things. We bring to your attention some interesting ideas.

Jeans fail unexpectedly, and most of them, as a rule, still look great. But some kind of wear or other defect eloquently confirms that this thing can no longer be worn. A connoisseur of this piece of clothing may have several such pairs. One of the non-trivial ideas for their further use is the creation of a hammock.

Creating such a hammock will not take much time, but how much pleasure there will be from using it! And you can conjure over its decoration for your pleasure, showing your imagination to the fullest

The ideal option would be when you already have an old standard hammock, but it's time to update it. This is where jeans come in handy. But keep in mind that you need strong enough products, which is simply a pity to harass on rags. We use fasteners, ropes and other rigging parts from the previous hammock, they usually last longer than the cloth.

We sew several pairs with a thick and very strong thread. The guides and ropes should be fixed in the same way as they were in the old hammock. Scraps of jeans can be used to make pockets or handbags out of them. Sewn on the side, they can accommodate a water bottle, a book, glasses, sunscreen and other little things that will come in handy for lovers of relaxing in a hammock.

Old bath - a storehouse of new ideas

You made repairs in the apartment and, of course, decided that you no longer need the old bathtub. But, as it turns out, it can become a real decoration of your country life. It remains only to count the options in what capacity it can be used.

Idea # 1 - a small cozy pond

If you planned to diversify the landscape of your site with a small pond, then the old bath will come in handy. Choose a suitable place, mark out the size of the tub, and dig a hole. The drain holes on the side and bottom can be closed with a plug made of wood, wrapping it with a cloth.

A small bathtub as a pond looks very attractive even if it remains white. Anyway, over time, if it is not cleaned on purpose, it will no longer stand out so much.

Some prefer to pre-coat the surface of the tank with dark paint from the inside to make the pond look more natural. Along the perimeter, the finished pond is decorated with stones, lanterns, figurines and plants. Ferns, bluebells, irises and loosestrife will look great.

To decorate a pond, you can use not only pebbles and plants. Useful decorative figurines, lighting and even fountains

Idea # 2 - an original and stylish sofa

Furniture in the country should be not only comfortable, but also durable. If you work on the side of the bath with a grinder, you get exactly what we need. We process the edges of the cut, cover the product with paint, after which we close the cut with a border. Elegant decorative pillows, like the final touch, will bring the sofa to a state of complete readiness.

Does it look like this stylish sofa was a bathroom in its past life? But now it can be left even in the open air, without fear of rain. It's better to take pillows with you

Idea # 3 - bath-bed

The bath is a finished flower bed. It is enough to fill it with soil, not forgetting about drainage, and plants can be planted. Decorate such a flower bed should be taking into account the overall design of the site. You can use mosaics, paints or any overhead elements. Be creative, and this flower bed will fit perfectly into any conditions proposed for it.

A snow-white bath filled with petunias, like foam, does not need special decoration. However, the white figurines of poultry and animals look quite appropriate.

Idea #4 - funny cow

At the same time, a bathtub can be functional and decorative if it is used as a container for water, which is always useful in the country. Small additions will make the old thing a source of wonderful mood for everyone who sees it. By the way, since the water in this tank will change periodically, you can also use it as a pool for children.

Such a cow is needed not so much as a pool or water tank, although these functions are also very important. It is especially attractive as a source of positive, positive emotions.

pipe flower design

For such a structure, it is not necessary to use old pipes, but to make it from what was being prepared for disposal is doubly great! The resulting design can rightfully be called a vertical flower bed. It is also important to find a suitable wall that she could decorate in such a way as not to violate the overall style of the site. Although such a structure does not have to be done against the wall. It will also look great as a partition dividing the site into zones.

Add a bit of your own imagination and just imagine what the same design might look like when the plants peeking out of the holes are in full bloom.

With the help of the appropriate decor, you can create real miracles. To make this flower bed decorate your site, you will need quite a bit:

sewer plastic pipes;
standard and corner connections;
wall mounting;
dye;
common garden tool.

By the way, you can paint the supporting wall. Just imagine how this structure will look like if you plant ampelous plants in it!

News from the world of old tires

We will need five tires, an old plastic chair, a steering wheel and the material from which the frame and base will be built. You can install all the elements of the structure on a welded metal frame. In an alternative embodiment, the parts can be fixed autonomously on pieces of an angle driven into the ground. Ultimately, it does not matter which manufacturing technology you choose. Much more important is the design of the structure, which should be given maximum attention.

We warn the adult part of the family that this toy is really dangerous. It causes addiction in the fathers of the family and a passionate desire to return to childhood.

A trampoline is a hobby that can wonderfully entertain your child until they get bored. It differs from any other abandoned toy only in size. But for us, it is this parameter that will be of key importance. See what a wonderful wigwam you can make from a trampoline.

Even if the new structure is simply called a hanging bed, it will not be empty. The obvious advantage of such a bed will be its remoteness from the surface of the earth: insects will not annoy you, dampness and moisture will not threaten you.

Such a hanging bed is convenient precisely for its remoteness from the ground. Firstly, it will be convenient to get up from it, secondly, it can be protected from crawling and flying insects, and thirdly, the cold from the soil will not affect the health of those sleeping

What grows in your country house?

Old, but such beautiful dishes are an occasion to create amazing summer decorations made of glass. Making such a glass flower with your own hands is not as difficult as it seems. The general principle is as follows: you need to pick up items of utensils in the same color scheme or, conversely, contrasting with each other. The assembly should be made from a larger part, which depicts the petals of a flower, to a smaller one, imitating a flower corolla. A hollow metal rod can be used as a stem. Such a flower can play the role of a flashlight at night.

These are handmade flowers. You can make such beauty yourself if you have extra dishes that you can donate to decorate your garden.

Blooming garden music

Musical instruments that have served their time simply cannot be sent to the trash. The hand does not go up. But this is not a reason to turn your house into a warehouse of old things! You can turn tools into flower beds.

Musical instruments are especially unfortunate to throw away, so every effort should be made to protect them from bad weather and the negative effects of moisture.

That's just the first thing you should carefully process the wood to protect it from decay. You will have to repeat this procedure at least once every two years. In the video below, you will see a waterfall built from a piano. This complex design requires special protection of the internal parts of the tool from water. Otherwise, this waterfall will not have to please its owner for long.

Fences and gates from old trash

Sooner or later, garden tools fail. And then, when it becomes no longer possible to use them for their intended purpose, you can build from them, for example, a gate, a fence, or even an original garden flower for fear of garden pests and thieves.

This agricultural equipment looks very organic not only on the gate, but even as a flower: with a hint of retribution to those who dare to encroach on someone else's property

Talking about the new life of old things is simply impossible to stop. Probably because the human fantasy has no limits. And it is wonderful that we do not lose the desire to surround ourselves with beautiful things that bring positivity and happiness to our home.

In the summer, many summer residents rush to their home gardens. It is there that country life is in full swing around the clock. During the day, garden and vegetable garden care, conservation and other matters, and in the evening you can relax and do a little handiwork. Old things and other rubbish are used, from which craftsmen create real masterpieces with their own hands. Often their photos can be found in the "Country of Masters". You can decorate your home and garden with ready-made crafts or give them to friends.

Garden mannequin: making a garden scarecrow

The garden scarecrow is an ambiguous element of landscape design. Previously, it was used to scare away birds from sowing and harvesting, but at the present time it is a decorative decoration.

The scarecrow consists of two parts: the head and the body. Initially, it had an intimidating appearance, the scarecrow was dressed in old rags. Now it is an original doll, sometimes pretty, often fashionably dressed and almost always cheerful. How to make a scarecrow with your own hands? Very simple.

Advice. As a torso, in most cases, I use two sticks that are interconnected crosswise.

As for the head, there can be many options:

Clay pot. Having decorated it, you get the face of a doll.
Pumpkin. This is a favorite attribute of the American holiday "Halloween". You will need a large copy in which you need to cut holes for the eyes, nose and mouth. Or you can just draw a face on a pumpkin.
Fabric head. Two circles are cut out of canvas or other fabric, sewn together and a small hole is left. A scarecrow is stuffed through it with straw. The elements of the face are buttons, various overhead or painted elements.

You can put on a scarecrow any old unnecessary clothes. Although it is not uncommon to find garden mannequins that are dressed very stylishly. It all depends on your imagination.

How to make palm trees from plastic bottles?

Plastic is a fairly popular material, which is always in abundance. From it you can make many different crafts. For example, an exotic palm tree. For this you will need:

plastic bottles in two colors (green and brown);
scissors;
a metal sheet;
rods, bushings and pipes made of metal;
high voltage cable.

Almost all of these items can be found in your country house. We offer you a master class on making palm trees from plastic bottles.

Advice. Before use, clean all bottles from labels and rinse with water.

First you need to make the leaves of the future tree. To do this, cut the green bottles in half, cutting noodle-like strips to the neck (not to the very end).
String bottle leaves onto a 14 mm cable.

Attention! For one tree, 7 leaves are required. The length of the palm leaves can be adjusted independently.

The next stage is the manufacture of the trunk. You will need brown plastic bottles.
Cut 6 strips into them to make the base of the palm tree.
String blanks on a high-voltage cable. Only after that proceed to the base of the tree.
Weld metal rods to the sheet at different angles. Their length should be about a quarter of a meter.
Put tubes with a diameter of 20 mm on metal rods, and weld bushings on their ends to fix the palm leaves.

Fix the leaves on the tree by pushing the cable through the bushings.
Collect the stem. You should start from the bottom.
When the decorative structure is ready, dig it 50 cm into the ground.

Original figurines from old tires

At first glance, rubber is a material that is not entirely suitable for decorating a summer cottage or a house. But it's not. Old tires can be used for some purposes. For example, as a flowerpot, a children's sandbox and original figurines. It is on the last option that you can stop and make a swan out of rubber tires.

Prepare the following materials and tools:

old tire;
brushes;

paints;
sharp knife;
Bulgarian.

Advice. Patterns can be found on the Internet.

Let's get started:

Mark the tire with chalk. These will be the cuts.
Cut the tire along the markings. Periodically moisten the knife in soapy water, this will simplify the process of cutting rubber.
Bulgarian process the remaining edges.
Turn the product inside out and the figure is ready.
It remains to cover it with white paint.

A simple log feeder

For those who do not know what a churbak is, a small digression. This is a wooden stump or a short log. A very convenient material for making bird feeders. To make it, you need a block of wood and fasteners.

The inside of the log should be hollowed out. There must be space. That's actually all. The feeder is ready!

Advice. Do not forget to screw a mount to the structure to fix it on a tree or its branches.

Foam garden figurines

Have you recently completed a renovation and still have a lot of building material left? Don't rush to throw it away. From some things you can create real works of art. From building plaster or polyurethane foam, you can make figures for the garden. Well, let's start implementing the last idea.

Advice. To make the figurine more stable, plastic bottles are filled with sand.

Flower beds-pigs from plastic bottles

The original design of the flower garden is one of the prerequisites for landscape design. Classic flower beds attract with their chic look. It never hurts to deviate from the classics. Therefore, carefully study the master class on making flower beds made of plastic pigs. To do this, you will need 5-liter water bottles.

Cut off one side of the container.
From the cut out part, make the ears of the future pig.
Glue the ears to the body.
Cover the structure with pink paint, and cover the patch with red.
Draw eyes and attach a ponytail.
Fix the flower bed well in the ground.
Fill it with soil and plant your favorite flowers.

Little pigs with flowers will look very cute. They can be placed under a tree or close to other flower beds.

Do-it-yourself crafts for summer cottages and gardens are not only pleasant needlework, but also an opportunity to decorate your space. It is not necessary to purchase expensive materials, everything you need can be found at hand. Plastic bottles, tin cans, shovels, polyurethane foam, etc. are used. In the end, garden figurines, feeders, beautiful trees, scarecrows and flower beds are obtained.

Crafts for giving: video

Crafts from trash: photo

If there is construction debris in the country house, any scraps or leftover materials, they should not be thrown away, because almost everything can be given a second life! Country garbage can become a material for the production of very useful things!

The first thing we decided to do was introduce the bike rack to the readers. This is the simplest and most popular transport among summer residents and residents of villages, which, often, simply leans on a tree or a fence after arriving at the place. But if no one wants to equip a place for parking bicycles on their site, this does not mean that bicycles in your country house should knock bark off trees or peel off paint from the surface of a new fence!

Find some old car tires, bury them vertically only 7-10 cm apart, and the bike rack is ready. Agree, a cheap way to do something useful, as well as the ability to use country garbage to good use!

Garden figure from tanks and bottles

We have several articles devoted to this topic at once, and one of the most interesting is the material on the application. Today we're taking this topic up again and showing you a fun and very cute piece for the garden!

This is a small elephant, for the assembly of which you will need several and a half and one five-liter bottle.

The good thing is that even expensive consumables do not need to be used here. Wire or glue to connect the elements of the garden figure, the remnants of paint after repairs to give the appearance, and a corrugated pipe so that our elephant has a trunk!

This is a great idea, especially since there may be more similar figures on the site, or maybe they will be completely different!

New crafts from car tires

And again we return to car tires, because the material of their production is extremely strong and durable. That is why garden figures are obtained from tires, and even, which we will also pay attention to today.

But now it is a cartoon, and a very famous character - a minion. Such a figure will dilute the situation on the site and may even be loved by children, who probably know the history of small and very bright eccentrics!

How to make such an interesting figure out of tires? Everything is very simple! You need to fasten several tires by placing them one on top of the other, paint them in the appropriate colors, add eyes made of plastic and foil, and give emotions with a sketch of a smiley!

Not all crafts are especially useful, but if they are cute, then they are worth talking about too. Yes, in this section of the article we have already moved on to a smaller hand-made, but we’ll fix it in just a couple of lines!

So, an insect from frankly unnecessary garbage. A couple of scraps of steel or knitting wire, which, by the way, are easier to work with, a couple of washers and a light bulb painted in any color. The whole thing is formed, tied up or glued, and hung in a window opening, in a gazebo or in any other place you choose.

Our next proposal is much more serious. This is a small canopy of construction debris. Interestingly, on the basis of such a structure, you can do a lot of useful things:

Shed for compost storage;
Canopy for firewood;
Rabbit or poultry pen (you will need to work more carefully by reading the basic requirements for such structures on our website);
Canopy for temporary storage of sand or other loose building materials, and so on.

That is, the design is very simple, and at the same time very functional. And the most pleasing thing is that it is assembled in just a couple of hours from the remnants of materials after construction or repair. Metal pipes, corner, boards, slate, you can use brick or stone for laying the foundation, more materials for building walls and cladding, protection from wind, moisture, sun.

Tire garden furniture set

Car tires are not so difficult to find, but for some they are completely folded in or near the garage, and take up a lot of free space. This is old summer or winter tires, which you can’t even put on a car, and throw it away, as usual, it’s a pity ... just like an old suitcase. But now tires come in handy for another good deed. Of these, you can make not the main, but auxiliary summer furniture, which, say, will be in the garden, where you can always cool in the shade, read, relax.

How to make furniture from tires? On the one hand, it's easy, but it will take a little effort! Tires should be washed well, as dry rubber is quite easily soiled. Next, remove all burrs, protruding reinforcement and other defects from the tires that can hurt or ruin clothes.

After that, a rope, clothesline or just a thick cable in insulation is required, with the help of which the seats and backs will be made. Here you will need to work hard, since for attaching a rope or cable, you need to make a lot of holes with an awl or a screwdriver. You can also use wooden elements, bolting, other little things, for example, pillows.

Country pool from a trolley, bucket, tank

Storing water in the country requires us to have a variety of containers. Only today we are gradually switching to new plastic tanks and large capacity containers. Previously, every second summer resident on the site had old loading trolleys, transport elements from factories or mines, buckets from tractors and lifts, or tanks simply welded from thick metal. Many still have them today, and most often, the owners want to get rid of them after purchasing plastic barrels. The reason is clear - to make some money from unnecessary scrap metal before thieves earn money from it!

But there is a more interesting idea. Firstly, you can always defend the water for watering young plants and seedlings, mix fertilizers in tanks or collect rainwater in them by removing the pipe from the drains. But if the container is in good condition, it can be used for a very interesting purpose. This is an almost finished pool, which now does not need to be bought. A minimum of finishing, the purchase of a small pump for water discharge, or simply installing a drain hole, and the pool is ready!

Decorative lighting from glass bottles

Recently, do-it-yourself decorative lighting has become quite fashionable. You can make a wooden chandelier, add forging, steel elements, install high-quality light bulbs, and at the same time get a lighting fixture that is many times cheaper than a store-bought one. Therefore, for giving such solutions are extremely relevant! Here, the design style is somewhat different, and the budget for such acquisitions is limited. Therefore, a DIY lamp is a really good idea!

We have already told you about decorative, but today we present a bottle lamp. To get a high-quality and beautiful look, we need to cut the bottles, grind the edges, place lamps with high-quality cartridges inside, and simply plug them into the network. But be sure to carefully work with electricity, as it is unsafe, but also with the glass itself!

There are several ways to cut bottles. Today, glass cutters, automated glass cutting machines, home cutting methods with a burning thread are used. They are known to very many, and are quite simple. Grinding is considered more difficult. You need to work in tight gloves, always with a petal, so as not to inhale fine glass, and fine sandpaper. It is also advisable to dampen the surface being sanded to get the best effect!

Table for a country house from old doors

This table can be made to be placed indoors or outdoors. It will be strong and durable enough for its initial state. You don’t feel sorry for such furniture, since you can assemble it from unnecessary remnants after repair, on your own and in just a couple of hours. And therefore, in this way not only a decorative dining or coffee table is assembled, but also a cutting table or a workbench for a workshop!

It is advisable to use wooden doors for the production of furniture, as hollow ones get wet and deteriorate very quickly. But even if you took solid wood or glued laminated timber doors, a minimum finish is required. Firstly, this process will change the appearance to one that is most appropriate for styling a room or outdoor recreation area, and secondly, the finish will serve as additional protection.

Most often, old paint is removed from the door, for which it is better to use a mounting hair dryer and a scraper, polished with a bar with sandpaper, and then covered with stain and varnish, or weather-resistant translucent paint. The effect is simply amazing, especially if the doors are installed on massive legs ... for this you can take old beams, beams, sleepers.

Some time ago, we told you how to make a bar in the country to get an interesting place to relax with your own bar. Then we also used unnecessary materials, one might say, country garbage. But today we want to start from something else... let's take an old piano. Naturally, it should not fall apart completely, since it will be extremely difficult to restore it. But if you have a piano at home or in the country that does not work or that no one just plays, it can be converted into a great bar, set in a patio or gazebo.

Pay attention to the photo below, how original this craft looks from an unnecessary thing. Elegant and beautiful, and most importantly, very functional.

Easy repairs, sanding, new painting, installation of the necessary fittings ... and you're done! In some cases, of course, it will be necessary to remove all the “insides” of this musical instrument. But this is only for the benefit, since the strings can be used with benefit, for example, as a wire, and the bronze elements inside are expensive!

Summer kitchen furniture from an old cabinet

Do you have old furniture in the country that you have been wanting to throw away for a long time? Do not rush, because any such product today costs money. This is if you want to sell it ... but you can always restore an old wardrobe, completely redo it. You can install a sink, household kitchen appliances in it, bring the necessary communications and use it for a new purpose on the territory of the summer kitchen or makeshift huts in the country. It's simple, because we had a much more complex and serious job. Look at the photo, and you yourself will understand the whole work plan, the process of transforming old furniture into new!

The only thing we would like to note is the need for a protective coating. Choose a high-quality antiseptic, as well as weather-resistant paint, which must be applied in at least two layers!

Outdoor closet or shed from old doors

In the country there is an urgent need for utility rooms. It is not always possible to store working equipment or tools in a garage, and therefore it is necessary to build a barn, a small utility block or an outdoor cabinet for all kinds of garden supplies. This can be done using all the same old doors that could remain after repairs in the country. You can also get them from neighbors who have recently done similar repairs.

The whole structure is quite simple, and is a frame sheathed with doors. It must be durable, and old doors fixed as walls must be painted. Inside you can make shelves, small racks, hooks.

Country arch from old doors

The doors you replaced are garbage. They are more often simply taken out for some kind of summer cottage, where they stand for a very long time until they completely dry out or rot. But you can use this garbage to good use, as we have repeatedly said.

Now we recommend doors as decorative elements. They can become the basis for the construction of the original arch. See the photo below for how it's done. A pair of doors that are fastened together, painting, and decoration with plants, hanging planters, pots and containers with flowers. Such a nice structure can also be installed on the border of different functional areas of the suburban area.

Storage cabinet for bolts, nails, nuts

There is always little space in the garage or utility block. We often litter such premises with things that are not needed there at all. And, although in the garage there is definitely a place for various small things for a car and other equipment, it is not always necessary to store nails and screws there!

Today you can buy special organizer boxes where you can put hardware and fasteners. But they are very expensive, although they are made from simple, cheap plastic. Then the idea arises again to make something useful from country garbage.

Take a few pieces of chipboard, chipboard, plywood or OSB, and put together a cabinet. You can fasten individual parts with screws or nails, but it is also recommended to glue all joints. In just a couple of hours, a small closet or cabinet can be made. Next, you need to take old canisters or plastic bottles, carefully lay them out on ready-made shelves and fill them with small things. It will be correct to mark all containers for nails, washers, bolts.

Construction from reinforced concrete pipes

It's time to talk about more serious projects in which you can use precast concrete leftovers. We hasten to notice that not always the reinforced concrete pipe offered by us remains after the construction of a well or other important object, but it happens. Moreover, in dacha cooperatives and various kinds of villages, this material is often available after work with sewerage, laying water supply. In short, the proposal is for those summer residents who have such a pipe.

The reinforced concrete pipe is an almost finished room, only the one that is open on both sides. It is possible to use it for arranging an economic structure or even a house as a small residential building. Of course, for the last project you will have to spend some money, and use all your knowledge in construction and repair, but believe me, it's worth it.

The pipe is laid in the desired part of the site, fixed in place with stops so that it does not move later, and converted into a structure for the desired purpose. To do this, waterproofing and painting are carried out outside, and one end part is hermetically sewn up. Wood, brick, various blocks of the type of aerated concrete or foam concrete are used here, after which plastering and painting are carried out.

From the inside, any decor is possible, and in some cases, even insulation, on the other side of the pipe - a door or a screen, if it is a summer-type building. It is clear that such a construction will not become high-quality housing, but here is a place for summer nights, or a building for some kind of warehouse, easily.

By choosing a destination, you also control your own costs. A storage room of this format must be ventilated and dry. If it is a residential building, it is necessary to ensure maximum comfort and safety inside it. All this is real!

Country house from a container

We will definitely discuss this topic in more detail in order to explain to readers how it is possible to rebuild an ordinary cargo container into a real country house or temporary hut. In the meantime, we would like to invite you to familiarize yourself with this project.

Such a construction and its complete finishing can be considered advantageous in the case when the container is already there. If a container needs to be purchased to implement such an idea, then the entire structure will cost quite a lot, which will be unprofitable. But we know for sure that there are containers and wagons in dachas, and in many, so it becomes more and more possible to implement a rather interesting project.

As an announcement, I would like to say that from one or more containers, which for many are not just garbage, but rusty and useless cargo in the country, you can make a very good cottage that every neighbor will envy. The house will turn out dry and warm, though not very big!

Useful and original crafts made from trash and garbage, and sometimes even more serious objects, are possible today. One has only to take the time and show interest in the implementation of such ideas, and you will definitely succeed. We, in turn, will try to help with the recommendations of our experts and new ideas!

Ordinary things and objects are associated with memories, it seems that they can still serve the benefit of the family. It is useful to get acquainted with other people's ideas and make something practical out of unnecessary things with your own hands.

Making a fence in the country

With the help of decorating the fence, you can zone individual areas. For example, make a children's corner or highlight a recreation area.

To turn a wooden fence into an art object sparkling in the sun with colorful lights, you need some free time and set of materials:

Glass colored stones or large beads.
Drill and drills with a diameter corresponding to the size of the stones.
Glue gun.
Soft cloth.

Stages of work:

Use a drill to make holes in the tree according to the number of multi-colored stones available.
Apply glue along the edge of the stone or bead and carefully insert them into the prepared holes. With a cloth, if necessary, remove excess glue and polish the stones.

Another design option for the fence allows you to use old wheel caps from car wheels.

Caps are distinguished by a variety of shapes and allow you to create an interesting flower arrangement.

For such a design of the fence, in addition to caps, you will need paint of several colors and imagination.

The performer does not require special drawing skills.

You can choose the color scheme according to your taste: some like calm tones, while others like bright and juicy ones.

With your own hands, you can create vertical flower beds from unnecessary things that will decorate any fence. The main thing is that it is strong enough to withstand such decoration.

Old window frames, shallow wooden boxes for vegetables or fruits, or you can put together a rectangle from unnecessary boards as a frame for a flower bed. To prevent plants and earth from falling out of the container, the surface of the flower bed must be reinforced with a reinforced mesh.

Tire beds

The properties of automotive rubber that do not rot or deteriorate from exposure to the sun, snow and water can be used to implement useful creative ideas.

Tire bed options:

A simple and therefore popular use of a tire is a flower bed.

With your own hands, you can create a lot of unnecessary things. For example, old tires make wonderful flower beds.

To make a flower bed, you need to thoroughly wash the rubber with a brush. A clean and dried tire is recommended to be painted with bright paint. For planting ampelous or climbing plants, the tire can be hung on a tree using a chain or a strong rope.

If there are several tires available, then it is better to make a large flower bed.

The difficulty that can arise when working with tires if they need to be cut to implement the idea. To cut rubber, you must have a shoe or hunting knife and a jigsaw. In rare cases, the tire can only be cut with a perforator (this depends on the structure and properties of the rubber).

Next, you need to insert the knife into the rubber and cut it, making short jerks, as if trying to tear the surface. If the knife is not perfectly sharpened, but has a relief blade, then this is even better. One place can be visited several times.

Where it was possible to cut through the rubber, it is necessary to bend the end to the side in order to increase the view and simplify the cutting process. It is advisable to do this together. If the integrity of the tire is violated, it will begin to lose rigidity. If this happens, then cutting should be continued with a jigsaw.

Flower bed on legs.

To make a flower bed you will need:

Tire.
A round wooden board with a diameter corresponding to the diameter of the tire minus 4 cm.
Wooden stable legs - 3 pcs.
Self-tapping screws.
Screwdriver.
Twine or rope. The thicker the twine, the more interesting the appearance of the product will turn out.
Glue gun.

Stages of work:

The round board must be screwed to the tire with a screwdriver and 6-8 self-tapping screws.
The legs are fixed with self-tapping screws, while you should focus on the center of the board.
The design of the outer side of the tire with twine begins with the edge of the round board - the base, and then goes in a circle in the direction from bottom to top.

Glue should be applied to the rope at the point where it is bonded to the rubber, and also after the completion of the circle, on the side of the twine, where the ropes should be in contact with each other.

If everything is done correctly, then the wooden base and the entire rubber surface will be hidden under the twine. Next, you need to fix the end of the rope inside the tire with glue. The flower bed can be used.

Used shoes for mini-beds

With your own hands, from unnecessary things, you can realize country ideas that amaze with a riot of imagination, for example, flowerbeds from old shoes. Moss and various succulents will be an excellent design for old shoes.. These are the most suitable plants for such flower beds.

The older worn shoes look, the more effective they will look framed by moss.

For country beds, any shoes are suitable. It is convenient to use rubber because it does not let water through, and you can make hanging planters.

Flower garden from old dishes

The main rule of giving says: for a container of any size there is a plant for planting. Succulents can be planted in small or holey dishes.

Pots are suitable for making hanging planters. Even if you simply place kitchen utensils with flowers planted in it on the territory of the garden, the appearance of the garden plot will change.

Old cups and saucers can be collected on one rack.

A variety of shapes and colors of dishes, together with fresh flowers, will create an interesting solution for decorating the space.

Seedling growing containers

With your own hands, you can make containers for seedlings from unnecessary things.

Suitable for this:

TetraPak packages from milk, kefir or juice.

A liter package must be cut across into 2 halves. Such a "pot" is suitable for large seedlings. If you cut the package lengthwise, you get a tray for small seedlings. These containers, except for paper, are made of foil and polyethylene, so they are strong and do not get wet from watering.

Plastic bottles. They can also be cut lengthwise or across.

Egg trays. This option is suitable for low seedlings. Both cardboard and plastic trays will do. So that the water does not stagnate, it is necessary to make holes for each recess with an awl.

Toilet paper rolls.

To use the sleeve as a container, one end must be folded and sealed so that it serves as the bottom. Such a container is suitable for medium-sized seedlings.

Garden figures from plastic bottles

Garden figures made from plastic bottles will decorate and make any personal plot original:

Palm.

To make a palm tree you will need:

Brown bottles of the same size 2 or 1.5 liters.
Green bottles. You can use containers of various diameters and shades of green.
Iron fittings for the barrel. If the palm tree is planned to be small, then you can use a plastic pipe.
A piece of wire for leaves.
Scissors and knife for cutting papers.
Scotch.

Creating a palm tree:

Bottles must be sorted, caps removed and labels removed. Wash if necessary.
The length of the palm leaf will depend on the number of bottles. In order for the tree to have a lush crown, it is advisable to make at least 7 sheets.
Green bottles must be cut across with a knife in the middle. Further work will be carried out only with the upper part. On it with scissors you need to make a fringe. The width of each part of the fringe is from 0.5 to 1 cm.

Next, you should collect the sheet, for this the bottles are strung on a soft wire (wire) one after another. The lid must be put on the first and last bottle of the sheet so that it is possible to fix the wire. A long cable tail should be left at the point where the sheet is attached to the trunk. It will be needed when assembling the crown.

With the help of strong adhesive tape and using the tails from the wire, you need to collect the leaves into a crown and fix them on the armature.
Brown bottles are used for the barrel. They need to cut the bottom. Then each blank is cut lengthwise into 6 pieces. 1/3 of the bottle at the neck should remain intact.

To form the trunk of a palm tree, the bottles are strung on the armature in the same way as the leaves were made. You need to move from the bottom up towards the crown.

The finished palm tree should be installed. Despite the apparent lightness of plastic bottles, even a small palm tree is a rather heavy structure. This must be taken into account when preparing the foundation. Iron fittings must be deepened into the ground at a distance of 1 m or more if the palm tree is high.

In addition to plastic palm trees, flowers of any shape and color can be “planted” on personal plots.

Tire trash can

Such a thing as a tire is a versatile material for street creativity. If there are 2-3 tires available, then you can quickly make a garbage tank.

To do this, you need to put tires on top of each other and fasten them together with self-tapping screws. 2 wheels are fastened with 4 self-tapping screws 5 cm long. To give the tank a gloss, it should be painted in a bright color. Buck is ready. At the end, you need to insert a 200 l garbage bag into it and you can use it.

Ball crafts

From an ordinary basketball, you can make a cache-pot. To do this, you need to cut the ball in half and make 4 holes with an awl in which to fix the cord or chain on which the pots will hang.

The same idea, but in a different interpretation - a flower pot.

There are also non-standard solutions: you can make a bag out of an unnecessary ball.

Old balls of different sizes allow you to create plot compositions in the garden and vegetable garden. Such creativity will captivate both adults and children.

To make a frog figure from a ball, you will need:

Old ball.
Paint in several colors.
Brush.
Styrofoam spheres.
Solvent.
Glue.
Stand (you can use an unnecessary saucer).

Stages of work:

The surface of the ball should be degreased with a solvent.
Next, the ball is covered with paint, according to the chosen plot. If there is no art education in the arsenal, then you can download a picture on the Internet and transfer it to the ball.

To make the frog last longer, the paint must be applied in a thin layer. Otherwise, it will soon begin to crack.

Eyes should be drawn on foam spheres, after degreasing their surface.
After the paint dries, the foam eyes are glued to the ball using any superglue.
The frog stand can also be painted.

Wicket from old gardening tools

The resourceful gardener does not have a question where to put the old rusty garden tools. He will make, for example, a gate out of them.

To get the original gate, you need to collect unnecessary inventory. Next, it should be evenly placed on the surface of the gate, after removing it from the hinges. This must be done in such a way that each tool can be fixed in 2 places.

To fix the metal parts you will need a welding machine. Wooden parts are fixed with self-tapping screws. The finished gate can be painted if necessary. It is better to use spray paint for this.

Garden fountain from a waste inflatable pool

Making a fountain with your own hands is easier than it seems.

At the same time, almost any container can be used as a water reservoir: an old basin, a bathtub, a tire from a large-sized machine.

An interesting solution is to make a fountain out of old children's inflatable pools.

The fountain pump will need to be immersed in the bottom of the pool. In order for the pump to stand steadily, pools without an inflatable bottom should be used.

In the fountain, water will circulate: with the help of a pump, it comes out in fountain jets, then drops fall back into the pool and back into the pump.

Use of an old skateboard

From an old skateboard you get an original hanger. Of course, it needs to be updated, painted and selected hooks that will be in the same style with it. It is not a shame to hang such a piece of furniture even in a city apartment.

Another option for using a skateboard is as a seat at a small bench.

A skateboard plus a little creativity and a stylish magazine stand is ready.

And in the country from a skateboard you can make a swing for future generations.

With your own hands from unnecessary things, you can realize ideas by giving things a second life.

From an old stool you get a small shelf for bath accessories. It is especially beautiful if the stool is old. It may be necessary to carry out a small restoration: sand and prime the chips, renew the paint. But the result will delight the eye and surprise guests for a long time.

Or an unnecessary stool can be turned into a bedside table. To do this, it should be painted and decorated in such a way that it fits into the overall look of the room.

After the repair, ceramic tiles or tiles in small quantities always remain in the apartment. Even this small amount will allow you to make unique things or give a new look to old items.

Any broken tiles and other small details (beads, pebbles) are suitable for mosaics. In order for the tile to hold well, the surface of the object should be prepared: first degrease, for example, with white spirit, then apply primer, and then glue the tile on any tile adhesive. The space between the mosaic pieces should be filled with tile grout.

It happens that one of the ceiling lights breaks at the chandelier, and it becomes unnecessary. Don't be in a hurry to throw it away. With your own hands, many amazing things are created from unnecessary things. The remaining whole shades will make flower pots.

If fantasy allows, they can be further decorated or left intact.

The frame from the chandelier can also be used. It can be converted into an unusual planter.

For hanging pots you will need:

Frame from an old chandelier.
Flower pots.
Aerosol paint.
Degreaser.

Stages of work:

The old chandelier must be cleaned of dust and dirt.
The entire frame should be degreased for better adhesion of the paint to the surface.
Next, the chandelier needs to be painted. Better to use spray paint. It is easier to lay down on objects with many small or curly details.

In a single color with a chandelier, flower pots should be painted.
At the final stage, flower pots are installed on the base for the shades and the planter is carefully hung on a hook prepared in advance. The resulting planter and flower pots weigh several kilograms, this must be taken into account when choosing a place for it.

creative hangers

Hangers are an indispensable piece of furniture for any apartment, house, barn. The budget version of the hanger will turn out if you use the items that are at hand in every home.

With your own hands, you can make a hanger for garden gloves from unnecessary things, having a wooden board and a few clothespins available.

A clothes hanger will turn out if you look at the usual hangers that hang in every closet from a different angle.

Wooden skis gathering dust in the garage, with the right approach, will last for more than one year if you make a floor hanger out of them. It occupies a small area and will become a useful piece of furniture.

Key holder

As often at the last minute before leaving the house, it turns out that the keys are missing. It is better not to make meaningless promises, always put the keys in one place, but to take 10 minutes of your time and make a key holder.

For the holder you will need a tennis ball and a clerical knife.

It is necessary to make a horizontal cut in the ball, 6 cm long. It should be cut just below the middle of the ball, where the mouth will be located at the future muzzle. Eyes are drawn or ready-made can be glued.

Such a holder is suitable not only for keys, but also for papers, towels, various office supplies. Depending on the tasks, the ball can be glued to the wall with superglue or attached with a screw.

With your own hands, it is possible to create another version of the key holder from unnecessary parts of the Lego constructor. The convenience is that the designer will perform two roles at once - the holder and the key fob.

Rack for garden supplies from old rakes

The shape of the rake itself suggests that they can be used as hooks.

In the gazebo, under a canopy, in a barn or garage, such a hanger will look quite harmonious. And garden tools, which every gardener and gardener has a lot of, will no longer have to be looked for.

Clock from unnecessary things

With your own hands, you can make a watch out of unnecessary things. This will allow for each room to make original interior items and at the same time save.

The main thing you need to have is a mechanism and arrows. They can be taken from old, obsolete watches or bought in a specialized store.

An interesting idea is to use domino chips for the clock, as they already have "numbers" of dots on them.

To make this watch you will need:

12 dominoes corresponding to numbers from 1 to 12.
Wooden boards.
Finished frame.
Paint with a brush.
Glue.
Clock mechanism with arrows.
Drill, nails.

Stages of work:

The boards must be cut to the size of the frame and fastened together. A hole is made in the center with a drill for attaching arrows.
Next, paint the frame with the boards in a single color.
Domino chips are glued evenly around the circumference.
Then the clock mechanism and hands are attached to the workpiece.

Other things can be used to make watches, for example, a pot lid, a cookie tin. In every house there are enough old things that can be given a second life.

Transforming a suitcase into a comfortable armchair

If the house has an unnecessary old suitcase, then having the skills to work with a screwdriver and a hammer, you can create an exclusive chair. Little is required of a suitcase: be wide enough so that it is comfortable to sit on, and have the side panels in good condition, as they will be visible in the finished product.

Also side panels must be strong to support the weight of an adult. Before you start creating a masterpiece, you need to sit on your suitcase and make sure that all of these requirements are met.

To make a chair from a suitcase you will need:

Suitcase.
4 chair legs.
Screwdriver and screws.
Hammer and nails.
Buttons.
Glue.
Paint and brush.
Scissors.
Upholstery fabric.
Furniture stapler.
2 pieces of foam rubber corresponding to the size of the suitcase lid and 5 cm wide.
2 boards 1.8 cm wide.
2 narrow wooden planks measuring 10 by 40 cm.
Sandpaper.

Stages of work:

From the boards it is necessary to cut the seat of the future chair. The size of the workpiece should be slightly smaller than the size of the suitcase. That is, the board should fit neatly into the suitcase and hold on to its walls. You need to cut 2 identical blanks.
To make a seat, glue foam rubber to a wooden blank.
Next, the base is upholstered with fabric. This can be done with a furniture stapler.
To decorate the seat with buttons, you need to screw in the screws at their location. And then glue the decorative buttons on top.

2 wooden planks are fixed inside the suitcase in such a way that the seat can be placed on them.

The second cut out board is needed to attach the legs of the chair. It should be lowered inside the suitcase and attach legs to it. Self-tapping screws should pierce the surface of the suitcase and enter the wooden base.
For the back of the chair, foam rubber should be upholstered with fabric and decorated with buttons. The resulting blank is glued to the inside of the suitcase lid.

Video tutorial on making beautiful garden furniture from old car tires:

Old garage parts

In the garage there will always be spare parts that are no longer used, but it's a pity to throw them away. Also, every garage owner tries to organize the space so that it is comfortable and functional.

Objects created with your own hands from old things that organize a comfortable space bring great joy.

It is quite easy to make a sofa out of old car seats.

The barrel of engine oil can be transformed into a convenient bedside table for the washbasin. The metal from which the barrels are made can be easily cut into the shape of a shell, and the pipes can be hidden inside the barrel.

A car disk can act as a sink.

Old headlights are suitable for creating an original chandelier.

From the hooks of the safety cables you will get a hanger.

Hooks from waste wrenches

Products from old wrenches will fit perfectly into the interior of a garage or barn.

For example, they can be used as coat hooks or doorknobs.

Tape box in the garage

If the garage space is organized incorrectly, then finding the tape can take time. To always know where to look for adhesive tape, it is recommended to make a special box with compartments where adhesive tape and electrical tape will be stored.

An important quality of the box is to provide the ability to fix the ends of the adhesive tape, so that if necessary it can be used quickly.

Reservoir for small tools

In the garage or in the country there is a problem where and how to store small tools or parts. To clean up the little things, you can use jars with lids. Cans are suitable for any size.

The advantages of such an organization of storage of small things are many:

Through the transparent glass you can see what is in the jar.
Space saving. The shelf can be used at the same time for its intended purpose - to put things on top of it.
The problem of recycling cans is being solved.

To make a shelf for storing small things from jars with twist-on lids, you will need:

Lots of jars of the same size and shape.
Finished wooden shelf.
Screws.
Screwdriver.
Pencil, ruler.

Stages of work:

It is necessary to prepare an even number of cans. To do this, unscrew the lids, wash, remove the labels.
Banks will be placed in 2 rows. With a ruler and a pencil, lines and notches should be marked at the place where the lids are attached (the calculation depends on the number of cans available).
The covers are fixed with screws to the shelf, in accordance with the markings made earlier. Jars should be put on the lids. Containers for small things are ready.

ladder rack

From a ladder that has lost its usual purpose, you can make a rack.

What you need to make a shelving unit:

Ladder.
Boards.
Self-tapping screws and screwdriver.
Metal corners.

To make a rack, you should install the boards and fix them to the ladder with the help of corners and self-tapping screws.

Tennis ball massage chair

There are many options for resuscitation of old chairs, armchairs, stools. An interesting idea to create a massage chair. It will take skill and skill to make it, but the result is worth it. Tennis balls act as massage parts.

Necessary materials:

Old chair.
50 tennis balls.
Plywood. You will need 2 sheets corresponding to the dimensions of the back and seat of the chair.
MDF. 4 sheets, the same dimensions as plywood.
Self-tapping screws.
Drill.
Jigsaw.
Perforator.
Sandpaper.
Textile.

Stages of work:

The chair should be dismantled: remove the back and seat.
On sheets of plywood, it is necessary to draw circles 2-3 mm wider than the diameter of the ball (usually tennis balls have a diameter of 6.3 to 6.7 cm) and cut out the drawn circles with a jigsaw.

Next, you should redraw the circles from plywood onto MDF sheets. The resulting circles should be reduced. Their diameter should be 2-3 mm smaller than the diameter of the ball. This is done so that the ball fixed in the resulting “sandwich” (MDF-plywood-MDF) can rotate, but does not fall out.

Then you need to cut out the circles:

Round holes should be rubbed with sandpaper so that the ball does not touch them for anything, but scrolls well.
MDF boards are varnished from the outside.
The seat needs to be assembled. From below, an MDF board, then plywood, you need to put balls in the holes and cover with an MDF board from above. If everything is done correctly, then the balls should not fall out, but they will scroll well, creating a massage effect.

Boards around the perimeter should be fastened with self-tapping screws, as well as in several places in the center.

For the manufacture of the back of the chair, it is necessary to repeat p.p. 2-6.

Cork bath mat

A cork rug has many advantages:

Eco-friendly.
Keeps warm.
Does not get wet from moisture.
The surface is non-slip.

For a small rug 40 by 60 cm, you need a lot of traffic jams (at least 100). It is difficult to collect such an amount, even if you involve all relatives and friends in this activity. It's easier to buy them. On average, 100 pieces will cost 500 rubles.

To make a rug you will need:

Rubber base. It can be a new or already used rubber mat.

If you use an old rug, then you must first wash and degrease it.

Wine corks. The quantity will depend on the size of the base, but not less than 100 pcs.
Glue gun.
Stationery knife.
Sandpaper.

Manufacturing steps:

All corks must be cut in half lengthwise. And treat each cut with sandpaper so that it is even.
Glue the halves of the corks first along the perimeter of the base. And only then fill the inner space.

Different orientation of the plugs when creating a rug will allow you to achieve different effects and patterns.

And finally, one more photo of items that can be made from things that are unnecessary in the household.

Do-it-yourself creation of new things from old things allows people to show their creativity, solve small issues on a budget, and possibly find a new hobby.

Article formatting: Natalie Podolskaya

Video about creating different useful items from unnecessary things with your own hands

Video, how to make useful items out of unnecessary things with your own hands:

How exciting it is to create beautiful things with your own hands from unnecessary trash. “The second life of unnecessary things” is the slogan of designers, needlewomen, creative people who never throw away such things, but do everything to transform them. Some items can be used to create children's crafts, while others can decorate the interior, others can even bring practical value in everyday life.

DIY bucket basket

Few people guessed that from a simple plastic paint bucket you can make a cozy basket. To create such a basket you will need:

First of all, you need to prepare a plastic bucket. To do this, you need to walk along its outer sidewalls with fine sandpaper, then degrease the container with alcohol. Carefully, so as not to get hurt, remove the iron springs from the clothespins. For convenience, you can help with a small flat screwdriver. Prying off the edge of the metal blank with a screwdriver, you must first release one wooden part of the clothespin, and then the other.

Lubricate each wooden blank with Moment glue, attach them to the outside of the plastic bucket, applying the halves of the clothespins to it with the flat side. The second is glued in the same way, located closer to the first. When all the clothespins are glued, it is necessary to measure the diameter inside the bucket with a centimeter tape, and then wrap the tape around the inner side of the container at the bottom and top. Determine the height of the container. Based on these measurements, two parts must be cut out: a rectangular sidewall and a bottom, which has a rounded shape. Sweep between each other to get a fabric cylinder with a bottom.

Lace must be sewn to the top of the received part. Insert the resulting cover inside the bucket so that the seam is inside the container. Wrap the handle of the bucket with twine, fix it with glue.

Put the handle back in place. In conclusion, it is necessary to cut the rope of the required length, string beads on it, fix it by wrapping two knots. Wrap the bucket with the resulting decorative element.

The finished bucket can be used for staging in the fairy tale "Little Red Riding Hood", so that the main character carries pies to her grandmother in it. In addition, you can store various tools, knitting threads and other needlework items in the bucket.

Pencil stand

To create such a stand with your own hands, you can also use all sorts of unnecessary items, including the wooden clothespins that we used to make the basket. They are disassembled in exactly the same way, separating the metal part. The plastic container must be degreased, the halves of the disassembled wooden clothespins must be glued, pre-painted in any color.

To make such a stand you will need:

You can even use toilet paper rolls if you like. Consider how to make a pencil holder from a sleeve. To do this, you will need the following tools and things:

3 toilet paper rolls.
Newspaper.
PVA glue.

From the newspaper it is necessary to cut off a strip, the width of which will be equal to the height of the sleeve. Such a stand for pencils can be made with or without a bottom. In the latter case, the stand will have to be moved around the table if it is necessary to move it, but without lifting it.

If you want to make a pencil stand with a bottom, then the sleeve must be placed on a sheet of cardboard, outline the bottom circle. Cut a cardboard blank along the resulting contour, adding a little in diameter. Glue the circle to the bottom of the sleeve.

Apply glue to one side of the cut newspaper strip, glue it to the sleeve. Make two more in the same way. Glue all three together. When the resulting design dries, it can be filled with pencils.

Other ideas for transforming bushings

Bushings can be given a second life if you use the following transformation idea. For her, the following tools were taken:

The sleeve can be dressed up in a suit. To create a suit from a piece of fabric, you need to cut a blank for a rectangular shirt, draw a tie with a marker. Glue the resulting element to the sleeve. From above, attach the fabric for the suit with glue, close the upper edge of the sleeve with it.

To make a pencil holder with buttons, they must be glued to the surface of the fabric to which the sleeve is attached. Another pencil case can be decorated with sports pictures and colored paper cut out from the magazine.

To make a stand for pencils from a sleeve and natural material, it is necessary to shorten two sleeves at different levels, and then glue them together. With a jigsaw, you need to cut small branches into small segments, and then glue them to the bushings, decorating the pencil stand.

Coasters from other waste containers

Quite interesting hair stands are obtained from empty bottles of shampoo, hair balm or other colored plastic bottles. To create such a craft, you need to remove the lids from the containers. If you want, you can cut off the top with a knife to make it wavy. Cut out a funny mouth from black and colored paper, glue white teeth to it. Attach the resulting element to the front side of the shampoo can. The resulting pencil stand will raise your mood while studying or working, especially if you attach eyes for dolls to them.

If you do not have unnecessary eyes for dolls, it is easy to make them yourself by cutting out two empty transparent pill capsules. Pieces of dark plasticine or beads are placed inside so that they act as a pupil.

The stand can also be made from empty tin cans. Instead of eyes, bottle caps are attached for this, and a bottle ring will serve as a mouth.

To build coasters for pens and pencils for a kindergarten or a large family, you can cut off empty plastic canisters, process the edges with sandpaper, attach them to the wall with self-tapping screws.

Paper desk pencil cases

To make a wonderful desk pencil case, you can use old unwanted magazines. For such an idea you will need:

Thick unnecessary magazine.
Thick cardboard.
PVA glue.
Pencil.

The magazine must be placed on its edge, its sheets divided into 5 equal parts. Secure them with paper clips. Connect the last group of sheets with the first so that they are arranged in a circle. Place a pencil in the center. Pull the edges of each part to the center, glue using PVA glue.

Put the blank on a sheet of colored cardboard, draw the resulting petals on it. Cut out this figure from cardboard, glue it to the bottom of the future stand. When the glue dries, the product must be turned over, after which you can put pens, pencils and markers in it.

You can also get the original stand from unwanted magazines or books. For this you will need:

First of all, you need to cut the binding of the book, fold the sheets in a pile. Cut out a template from cardboard according to the diameter of the containers. Attach the resulting template to a small bundle of sheets. Make two notches with a utility knife. The same holes must be cut in all pages, and then glued in groups. Put various office supplies in the resulting container.

Things from old newspapers

You just have no idea how many unusual things can be made from old unwanted newspapers. Consider the example of a composition from a house with a garden. For work you will need:

You need to follow the following instructions:

In conclusion, it is only necessary to make a newspaper tree. But this is worth stopping in order to study in more detail the technique of its creation.

To create a tree you will need:

Newspaper.
Glue.
Paper tape.
Needle number 1.5.
White gouache and paint brushes if you want to paint the wood.

To make a tree, you need 7 double sheets of newspapers. Roll up tubes from newspaper strips, wind them on a knitting needle, glue the ends of the newspaper so that they do not turn around. In total, 30 newspaper tubes must be prepared. 15 of them must be folded together, fastened with paper tape.

Take a newspaper tube, step back a little from the bottom of the tree trunk, start wrapping it. For a good fixation of the tube, it must be glued to the trunk with the tips. Divide the tubes of the trunk in half, wrap one half of the newspaper at the bottom. This fragment must be divided into several more parts, wrapping each of them with a paper tube to get branches.

Wrap the ends of the branches, wrap paper tubes at the bottom of the trunk several times to make the tree more stable . If black and white newspapers were used, then you can leave your craft in this form, but if you used colored newspapers, then the tree can be covered with a mixture of glue and paint.

Finally, you need to cut out the leaves and glue them to the tree trunk.

Crafts from old shoes

Considering ideas from old things, it is also worth mentioning the use of old shoes. But what can be done with this rubbish? Decor from unnecessary shoes can decorate any garden and home.

Now you have learned, how you can get rid of excess trash and what can be done from waste by putting things in order in your house. Of course, there are many different ideas on this topic. You can also show a little imagination and creativity to create some of your own unique things for your home.

Categories

Popular