Decorative fence made of plastic bottles. Plastic bottle fence for beginners: step by step instructions. Gallery of improvised fences

The irrepressible imagination of home craftsmen gave a second life to plastic bottles. What crafts are not made from this material: flowers, animal figurines, bags. But do-it-yourself fence made of plastic bottles deserves special attention. Moreover, you can make it not only from empty containers, the fence made of plastic bottle caps looks great. About what attracts this design of the masters and how to build it, will be discussed in the article.

Modular design for greater reliability

Benefits of a plastic bottle fence

A fence in the country from plastic bottles will tell you better than any words about the diligence and artistic taste of the owners.
You can easily collect the required amount of material. You can buy bottles in any establishment selling drinks on tap for a very nominal fee.
Durability. Plastic easily withstands a wide range of temperatures, maintains integrity under the influence of ultraviolet radiation and precipitation.

Speaking about the advantages of plastic, it is impossible not to mention the disadvantages.

Quite easily destroyed under the influence of mechanical force.
It cannot completely hide the view of the site from prying eyes.
Over the years, bottles become deformed, scratched, and become less attractive.

borders

Borders made of plastic bottles can hardly be attributed to full-fledged fences; they are usually used as flowerbed fencing.

Any summer resident can make a fence for flower beds from plastic bottles, because it consists of one row of bottles half buried in the ground.

The procedure for installing a fence for flowers

Installing the fence will not take much time and effort. And so that the result of the work pleases with its beauty, follow these steps step by step:

Mark the contour of the future structure on the surface of the earth. A fence for a flower bed can have both straight and curvilinear outlines. In the first case, pull a strong thread between the corners. In the second, sprinkle the contour with sand.
Dig a small trench.
Fill the bottom with a layer of sand and gravel, compact well. This will avoid distortions of the fence and uneven subsidence.
To keep the curb mechanically intact for as long as possible, fill each bottle with sand, earth or water. You can also use small stone, pebbles, crushed stone, broken glass, gravel.
Put the bottles upside down, cover with soil and tamp. In order for the fence to have the same height, when doing, check the evenness with a level or a long, even rail.

Such a design will organically fit into the garden landscape, because a bottle border for a garden can be an excellent limiter for footpaths.

wire fence

When there is a need to enclose flowers in a flower bed with a higher structure, it makes sense to build a decorative fence from bottles strung on wire.

Step by step installation instructions

Work should begin with a preliminary calculation of consumables. It is extremely important to immediately determine the size of the fence, because you can build a fence of any height.

In order for the structure to have an aesthetic, neat appearance, it is made from the same spans with an equal number of fragments.

Advice. Do not make too large spans, the optimal size of each is 200 cm. With such dimensions, there will be no sagging of the wire in the sections made.

To avoid distortions, using a ruler and a marker, mark on each fragment the areas of punctures for the wire.
Make holes in the bottles with a hot wire or a soldering iron.
Mark the area and install support posts.
String the bottles on the wire, and connect in sections.
Fasten the sections to the support posts.

Advice. If you plan to build a plastic bottle fence of considerable height, it makes sense to enclose each section in a wooden or metal frame. This will give the product strength and additional rigidity.

Weave a fence from plastic bottles with our own hands

Craftsmen even make a wicker fence out of plastic bottles. This is a long, painstaking task that requires perseverance, but the result is worth it. Moreover, you can weave not only the well-known mesh netting, but also deaf canvases, using various techniques.

You will also cope with a similar task by studying the master class and following the recommendations.

Advice. Of course, you can dissolve plastic bottles into ribbons with ordinary scissors, moving in a spiral. However, it will be much better to assemble a special cutting machine.

So you save a huge amount of time, because you can cut one unit on a bottle cutter in a matter of seconds.

Chain link from plastic bottles

The chain-link is known to every inhabitant of our country, but only a few are aware of what it can be made from plastic containers. We will tell you how to make a fence out of plastic bottles by weaving a net out of them. Perhaps novice masters will be scared away by such a technique, but we assure you that there will be no difficulties in manufacturing. A step-by-step list of tips will turn weaving into a pleasant pastime.

Break the bottles into ribbons 10 mm wide. So that they do not get confused, wind each one into a skein.
In order for the mesh to acquire an aesthetic appearance and increased strength, twist each strip into a tube. To do this, you need to make another device.
Wind the steel wire on a rod with a diameter of 3 mm, you will need to make 5-6 turns.
Insert the end of the wire into the wooden handle.
Slightly bending the plastic strip, pass it through the spring. To make it easier, pull with pliers, grabbing the edge.
Put a pot of water on the fire. When the water is bubbling, lower the attachment and slowly pull the tape through. In boiling water, the plastic will become plastic and easily twist into a tube, moving in a spiral.
To give the tubes a curved shape, prepare a flat wooden lath and apply risks along the entire length. The distance between the marks should be equal to its width, and the size of the square will correspond to the chain-link cell.
Fasten the tube at the beginning of the slats, and start winding gently. Arranging the coils diagonally between the risks.
Warm up the folds with a building hair dryer or over a candle (alcohol). Thus, it is necessary to bend all the tubes.
Connect the blanks together into a single canvas.

The grid is ready, it remains to fix it on the supports. The resulting design has a sufficient margin of safety and will fit as a support to place climbing flowers and grassy vines on it.

Acceptable options for weaving a grid of plastic tapes, without first twisting them into tubes. In this case, the bottle fence is no worse.

Woven fabric

Fences made of canvases woven from plastic tapes look incredibly beautiful. Use the basket weaving technique, it does not require professional skills.

Wicker fences will decorate the garden or protect the flowers in the flower beds.

The simplest step-by-step instruction

Fence bottle caps

The pride of the site will be a fence made of corks from plastic bottles.

To assemble, make 4 holes in each cover.
If you use covers of several colors, draw an assembly diagram.
For convenience, first collect the horizontal rods, and then thread the vertical ones.
Enclose the structure in a frame, increasing the strength of the lid fence.

Regardless of whether you enclose the area with fences made of plastic caps or whole bottles, the end result will surely please you and those around you. Place crafts from plastic containers nearby, and then your site will surely become a local landmark. After all, it is so interesting to stand out with originality and originality against the background of similar structures.

In the presented video in this article you will find additional information on this topic.

Some people are interested in how to make a fence out of plastic bottles. This material is always available, because in almost every home their number is growing every day. Do not rush and throw out the garbage, you can make attractive and useful fences out of it. They have a number of advantages that can conquer the most demanding land owners.

Bottles can be handled with minimal tools and almost no effort. This feature remains an advantage that is difficult to refute. In practice, the main secret is precisely the versatility that can attract anyone.

Plastic is easy to shape and can be made into almost any shape. Accordingly, people are not in vain seriously interested in bottles. Through them, it will be possible to easily cope with your own fantasy and translate it into reality. What parts to choose for work?

Covers;
necks;
Canvas;
Bottoms.

A fence made of multi-colored plastic bottles is a godsend for lovers of brightness and extraordinary beauty. Without looking back at ready-made design projects and complex schemes, you can create a masterpiece by first reading the instructions.

Important! Ideally, you can use all the parts at the same time, but for this you will have to think over the finished project.

Lids

A fence made of covers will become an original, but time-consuming solution. Its beauty is undeniable, as manufacturers do not skimp on shades. Today, you can freely collect material in a variety of colors to recreate unsurpassed patterns.

Small fences are easily created using ordinary glue and a frame, and if you want to get a full-fledged fence, you need a reliable foundation. Separate covers are applied to it in certain places, gradually turning into details of a bright picture. Separate parts are attached to the pillars, turning into a full-fledged panel.

necks

The cork fence still remains decorative. The painstakingness of its assembly often scares people, so they should pay attention to the necks. They seem to be ordinary scraps that are cut off to make a clean sheet, but this is a mistake.

Necks can be used to fence flower beds and beds, where their low height will give additional decoration. Although some designers prefer to apply them in whole stacks, which are combined together to get long stripes. A kind of "fence" freely encloses a personal plot, while maintaining its lightness and attractiveness.

canvas

The body of the bottle is the main part. If you plan to make such a fence with your own hands, you should use it. By carefully cutting out individual parts, you can use them expanded or fix them inside the frame along the edges. The result is a solid wall that perfectly decorates the site and protects from unwanted views.

Plastic sheeting is not as reliable as polycarbonate or wood, but its cost remains zero. For this reason, families should consider choosing this option when they want to cope with complex work at minimal cost. Installation can be done with twine or pieces of wire, so even during it there will be no additional costs.

Important! Usually the canvas is used rolled up, but if desired, you can stretch it, increasing the total surface area.

bottoms

Garden bottoms are also used to fence flower beds, but this is not the only way. They are exhibited in a considerable area, which is freely assembled into a solid surface. Yes, the connection will require some effort and scrupulousness, but the result will be a kind of network that protects from other people's views. You can experiment with the length of the connecting staples and you will get amazing results. For example, one row is interconnected with paper clips 5 cm long, and the next 10 cm.

Advantages

When making such fences, you can freely choose colored containers. They remain an excellent option, which is directly related to certain benefits. What are the benefits?

Ease of operation;
Minimum weight;
No costs;
complex structures;
No need for a tool;
Weather resistance.

Who said that simple plastic bottles do not allow you to turn fantasies into reality? An interesting fence will be made in a short time and will not require powerful concrete pillars. Moreover, the installation will require little effort.

Step-by-step instructions suggest that the finished fence retains its external design for many years. That's how long it takes for the atmosphere to degrade plastic. It is not affected by the environment, so the choice remains unambiguous.

Durability and lightness are the main advantages of a simple material.

Flaws

Lids or bottoms can easily finish the surface or create a pattern on the ground. Although even small parts of plastic bottles have a number of disadvantages:

Poor wind resistance;
Mechanical fragility;
The painstaking assembly.

In the wind, the bottles quickly begin to dangle. When erecting a fence, you will have to take care of a reliable fastening, which will eliminate such troubles. To achieve such an effect is difficult, but real. You will have to take care of the correct choice of design and additional reinforcement in advance.

Mechanical fragility requires accuracy. The surface easily cracks and deteriorates, so the owner will probably need a dense base or frame. Using this, it will be possible to make an attractive fence, which will remain in excellent condition over the years.

Using ordinary plastic bottles, designers create amazing fences. They are more like fabulous designs that immediately catch the eye. Choosing them, the owner of the site at the same time reduces their own costs, and also receives the necessary fence and attention.

04.07.2017

The suburban area is a great place for the realization of bold design ideas. Even the fence here can be unusual, for example, made by hand from plastic bottles. As befits a fence, he will allocate private territory and show uninvited guests that there is an owner here. If plastic containers were not thrown away, periodically every family could build fences from it - attractive, functional and reliable. The goals of their construction are different - both a full-fledged fence of a summer cottage, and framing a flower bed.

The advantages of fences created from bottles are:

Beauty and originality. For each owner, the enclosing structure will look especially, because. it is created on a personal initiative and in accordance with individual wishes.
Duration of operation. A bottle fence can last for many years. In hot and frosty conditions, the plastic is not deformed. This means that the fence will retain its shape. But it easily melts in fire and falls with strong gusts of wind, similar to a hurricane. If you are sure that these troubles will not happen in your region, feel free to surround the courtyard with a fence made of PET, i.e. plastic bottles.
Material availability. The design does not require significant costs. Cylinders can be stockpiled at home as cold drinks are consumed, or collected from different locations.

Of the shortcomings of the bottle fence, experts found the following:

Possibility of mechanical damage. Even under the influence of a slight force, the fence can fall, or any part of it will fall off.
Weak level of protection of the yard. A fence made of plastic bottles does not provide reliable security for the site.
Survey of the territory. It will not work to make the design deaf, so everything that happens in the yard will be in full view of others.

Varieties of bottle fences

Types of fences made of plastic bottles are represented by a variety of designs. It can be either a low border that highlights a flower bed, or a capital fence.

Mini fence. The design involves digging bottles halfway into the ground or penetrating to a greater depth. The method is good for zoning space, highlighting flower beds, flower beds and garden paths. Borders have a decorative function. To create them, the container is filled with sand or earth and placed around the perimeter of the area that needs to attract attention. The contents of PET can be varied by filling the cylinders with sand of different shades or broken glass. Bottles filled with different materials look unusual.
Wire fencing. For visual delimitation of flower beds and beds, the container is strung on a wire and put on the same level, which allows you to get a low fence. A more or less high and durable wall is obtained by fastening several rows of bottles with wire knots.
Fence from a plastic cloth. To make such a fence, you will need two-liter bottles. The bottom and top are cut off from the container, two rectangles are made from the remainder. The figures are combined into a single canvas with a stapler. The resulting canvas is fixed on posts, previously placed around the perimeter.
Fence rack. If you want to get such an interesting design, you first put the pillars and attach rack racks to them. Clean, dry and filled cylinders are “planted” on building glue or placed at the same distance on corks screwed to the rails. The container is alternately screwed into the corks, the bottom is nailed to the top rail. In the second case, the bottles are filled halfway or left empty.
Cover fence. An interesting option that requires a sufficient amount of material. On average, the fence takes 10 - 17 thousand caps. First, holes are made in them, then, like beads, they are strung on a wire.

Fence creation variations

To date, several types of structures have been invented that can be assembled from plastic bottles. These are frame fences, low decorative fences and permanent structures. Any part of PET can be used in work - caps, bottom or middle part. At the same time, the owner receives two benefits at once - getting rid of garbage and building an attractive fence.

To create a full-fledged fence, in addition to plastic bottles, you will need some auxiliary materials:

supports
Binding solution
Grids for fixing plastic (needed for some types of structures).

low fences

Low decorative fences do a good job of fencing flower beds with vegetation.

Also, low fences made of plastic bottles are collected for the purpose of marking and marking the territory. To create a mini-fence, PET is cut or inserted into the ground intact. The elements are placed next to each other. The combination of colors allows you to create whimsical designs. From bottles cut into ribbons, you can make a low fence.

Frame structures

A light, unpretentious fence is more of a decoration than a serious obstacle for hooligans. Its design requires a wire frame or wooden supports. A good option for creating a framed PET fence is a chain-link mesh.

When buying a mesh, choose a material with a mesh size that matches the thickness of the cylinders. Fill the cells with bottles like a mosaic, creating ornaments and patterns.

Capital buildings

These are fences made of plastic bottles filled with cement or a clay-sand mixture. The design process is labor intensive. Traditionally, it begins with marking the area and digging in pillars, observing a distance of 1 - 1.5 m. Along the perimeter, you can pour the foundation or do without it, having previously cleared and leveled the earth's surface.

The container is filled with cement or clay-sand mortar, then arranged in rows like brick luggage. Between the levels make a cement fill. The bottles are laid out with their bottoms out. Subsequently, they are easy to turn into flowers by staining.

How to make a meter fence from bottles with your own hands

Let's consider how to make a fence from plastic bottles on poles and cross rails with your own hands. PET in this case, take the same shape and color. With the help of screws, we fasten the corks to the rails, and grease the threads on the neck with reliable glue, for example, Moment. Before the start of the so-called construction, we recommend stocking up on bottles at the rate of 5 PET per picket fence.

Make a fence from plastic bottles with your own hands according to our instructions:

Clean the container in advance of dirt and remove the labels.
Of each five cylinders, leave one intact, and for four, cut off the bottom. And so for all sections.
On the surviving bottle, put on alternately all the cut ones, imitating a pyramid.
Pierce each product from top to bottom, achieving the formation of a hole. In diameter, it should match the wire, which will later be inserted into the "craft".
Assemble all manufactured spans onto the wire frame. The number of shtaketins depends on the scale of the building envelope.
Weld the spans to the bearing parts by welding or screw with wire.

If the frame is wooden, first the lids are screwed to it, and then the bottles are screwed into them. Screws are used to fix the covers. The next bar is placed on the bottoms of the cylinders. Another row of corks is laid out on top, the elements of which are screwed both to the bar and to the bottom of the higher bottle.

If you are looking for a budget solution for building a fence, then you will be interested in this article. We invite you to consider the original solution, which was implemented by a large number of summer residents - a fence made of bottles. Let's talk about plastic bottles. We will consider the pros and cons of this structure, as well as what types of plastic bottle fences you can build with your own hands. And of course, we suggest that you consider the instructions for making a fence.

Advantages and disadvantages

Like any other structure, a plastic bottle fence has a number of positive and negative sides. Plastic bottle fencing also has similar features. So, consider the positive aspects of such a decision:

Original and beautiful appearance. The end result is a great fence.
Originality. You can create an original design that is not repeated by anyone in color and design style.
Low cost. You just need to collect a certain number of containers or purchase them. Plus, such a fence will not cost very much.
Long service life. Such a fence made of plastic bottles will last for many years. On average, this can be 150 years.
Ease of maintenance. During operation, such a structure does not need constant painting, processing, etc.
After years, the material under the influence of sunlight is not deformed. It is also able to cope with low temperatures.
Little weight. There is no need to pour a serious foundation.

But do not forget about the disadvantages that this fence also has:

Instability to mechanical stress. Such a fence is very easy to damage and destroy.
Insecure. Such a fence will definitely not protect you from thieves and other unexpected guests.
visibility. If you are accustomed to privacy, then through such a fence everyone passing will see you.
Labor intensive manufacturing process. It will take a long time to put everything together.

plastic fencing options

There are several ideas at once on how to make a fence from plastic bottles for a summer residence. Consider the most common options, and then we offer you instructions for their manufacture.

Zoning

This refers to low fences, which are the separation of paths, beds and other areas. So, a plastic bottle is half dug into the ground. Only the bottom part will be visible. A similar border can also be used as a regular decoration. Its manufacture is very simple. Fill it with earth or fine sand, screw on the lid and dig into the ground.

On the wire

Another original solution, in which the bottles are fixed on a wire. So, the wire is pierced through her "body". In this case, you can make the fence relatively high. If the fence on the wire is high, then a dressing knot is necessarily organized.

plastic sheet

This is a rather unusual way of making a fence from plastic bottles. It is used very rarely. The reason is that it takes a lot of effort to make it. So, it is necessary to use only two-liter containers. They should cut out the middle part and cut vertically. That is, you should get a rectangle. Between themselves, these elements are connected with a stapler. The result is a continuous web of a large number of elements of plastic bottles.

Rack

Already based on the name, it is clear that such a fence in appearance resembles a rack. For its implementation, it is necessary to make a wooden frame. First, wooden support poles are mounted around the entire perimeter of the territory. To form a rack, transverse bars are attached to them. Before using the bottles, they should be thoroughly washed and then filled with sand. These containers are displayed on a manufactured rack.

Fastening bottles is best done with small screws. With screws, they are screwed to the rails from below and from above. That is, the height of the rack should be equal to the height of one bottle. Thus, the fence rises up to the required height. There may be several such racks.

Use of lids

Another very bold and original solution is to use plastic bottle caps. Of course, making such a fence will not be easy. This will take a lot of time. But the end result can be a very beautiful picture. On such a fence, you can depict any pattern. This can be done by using multi-colored covers.

Important! If such an idea came to you, then you should understand that its implementation will require a couple of tens of thousands of plastic covers.

But you can also make a small fence out of plastic covers. For example, you can protect a flower bed. In a word, there can be plenty of ideas.

Instructions for making a plastic fence on a wire

Now consider the principle of making a fence from plastic bottles and wire. To work, you will need a set of such material and tools:

Strong metal wire. It is desirable that it be made of stainless steel. Let the wire diameter be 6 mm.
Plastic bottles. You need to pre-calculate the required number of them. Moreover, they must be of the same size and color.
Sharp construction knife.
Scissors.
Drill and a set of drills. The drill diameter must be equal to the diameter of the wire.

So, the essence of the work is reduced to several sequential actions. First of all, the bottles are washed and dried thoroughly. After that, you need to carefully and evenly cut the bottom. In one column we will use 5 containers. As a result, the height of the fence will be about one meter. But keep in mind, the lowest bottle should be with a bottom, and all subsequent four with a cut bottom.

After that, put a bottle with a bottom on the bottom, and insert everything without a bottom on top of it. Make sure that the relief of the containers completely coincides and is located in series. Due to this, visually everything will look beautiful.

After that, it is necessary to take all the cut bottoms and drill holes in the center of their holes according to the diameter of the wire. Holes are also drilled in bottles at three levels. That is, a wire will be stretched across the columns of plastic containers in three places. Due to this, sufficient rigidity of the product will be ensured. After that, in a certain sequence, string a bottle with bottoms on the wire, as shown in the figure:

Having formed the required number of sections, the entire structure of the future fence made of plastic bottles should be transferred to the street. Along the perimeter, you dig metal or wooden support poles into the ground. At the height of the stretched wire in the columns of bottles, drill holes in the pillars of the supports buried in the ground. The wire will be attached to these holes.

As you can see, making such a fence is not particularly difficult. However, a lot of effort needs to be put in. The end result will please you, because this is how you can outline your territory.

Instructions for making a capital fence

Above, we examined a relatively simple design of a fence made of plastic bottles. Now we suggest you consider the technology for making a more powerful fence. To do this, you need to decide on the choice of building material, which will combine all the bottles into one fence design. For example, it can be a clay and sand-based mortar or a conventional concrete mortar. There are no rules here.

First of all, the site is marked. To do this, you need to put the pegs in the right place and pull the twine between the pegs. This will allow you to make the fence straight and not crooked.
After marking, in increments of 1.5 meters, you dig columns into the ground. Due to them, the entire structure of the fence will be held in place.
Now you need to pour the foundation. Some decide not to fill it. The main thing is that the base is even and clean.
After that, the plastic bottles are washed and dried. The inside of the bottles should be filled with concrete or sand, as desired.
After that, the filled bottles are laid out along the marked line like bricks. Between themselves, they are connected by a prepared solution.

There are several nuances to which you should pay attention. The bottoms of the bottles should be laid out on the street. Due to this, the fence will acquire a certain decorative character. After the concrete mortar has completely dried, the protruding bottoms can be painted in any desired color, which will completely hide the unpleasant and cold gray color.

Important! When making a capital fence in combination with plastic bottles with a solution, remember that the height of such a structure can reach up to one and a half meters. Moreover, such a height can be built in one run. When the mortar sets and hardens, you can raise the fence even higher.

As you can see, this method is also not very complicated. With all the work it is quite possible to cope independently. With all this, you will be able to create a very durable and reliable fence, which will be decorated with plastic bottles.

Conclusion

So, here we have considered all the features of how a fence is made from plastic bottles. In fact, there are a lot of ideas. In this article, we have described the most common ones. You can choose the technology that suits you best. And you can change it if you want. To do this, you need to connect your imagination.

We hope that this article has awakened in you the desire to create and create fences from plastic bottles at your summer cottage. If you already have your own experience in this matter, then share it by leaving comments at the end of this article. Moreover, we recommend that you watch the prepared video material, which tells about other features of the manufacture of such a structure.

If you think that an ordinary plastic bottle is just garbage, and completely useless for recycling in your country house, then you should definitely read our article and make sure that a plastic bottle is simple, versatile, affordable, malleable, durable building, and not only, material! And we will tell you more about how you can use simple plastic bottles to create a beautiful, original and functional fence in your backyard.

Plastic bottle as a finished building material: pros and cons

Plastic bottle- this is a huge achievement and, at the same time, the misfortune of our millennium. On the one hand, cheap, durable, recyclable containers for liquids of almost any kind. On the other hand, it is quite labor-intensive and not environmentally friendly, independently, practically, non-decomposable material. But, this is, if we generalize and consider the problem of plastic bottles globally.
As part of the suburban area, the recycling of plastic bottles can be a very interesting activity, i.e. it can be used as a building material.

Why is a plastic bottle so good as a building material?

The pros are:

The plastic bottle is

- cheap and affordable building material: You can buy lemonade or other drinks in plastic containers in absolutely any store (from a small store in a holiday village to a huge supermarket).

-durable, resilient and lightweight building material: allows you to build real solid structures that are resistant to mechanical stress large-scale structures.

- water-, moisture-, sun- and biologically stable building material: burns out extremely slowly, is not at all afraid of exposure to water, in liquid form, and if a plastic bottle was used as a clean building material (without residues of sweet contents), then it is also a universal building material resistant to insects, bacteria and fungi!

- is a good heat insulator: in a complete, finished form, to a lesser extent, in a modified (cut off, assembled) is a good heat insulator, due to the low thermal conductivity of plastic and the air contained in the bottle itself. When heated, the air cools down for a long time - hence its heat-insulating and, to some extent, heating properties.

- standardized building material: in this case, we mean the size and shape of plastic bottles. Due to their standard dimensions, they are easy to assemble and use as modules, complementing and changing the design of the building.

- a plastic bottle, like any plastic - can be deformed under the influence of temperature changes(reduce in size under the influence of the sun, crack from frost).

- a plastic bottle, for some - not quite an eco-friendly type of material, but these are personal preferences and beliefs, because we live in a modern world where the share of plastic, both in everyday life and in industry, is high and already vital!

Plastic bottle as a real building material: scope

What can be made from plastic bottles if you use them as a building material?
Virtually anything! The main thing is fantasy and creative and constructive thought!

Here are some prime examples of this:

- greenhouses from plastic bottles: durable, strong and practically free! A kind of home version of "polycarbonate"

- gazebos from plastic bottles: bright and practical house from improvised means!

- verandas and entire houses made of plastic bottles: an original, cute and cheap option for building a summer cottage!

- a fence made of plastic bottles: beautiful, simple and very practical way to use a plastic bottle!

And it is precisely such a functional and decorative fence made of plastic bottles that will be the hero of our article.

Plastic bottle fence: types

Plastic bottles, the fence of which is the most common option, is an ideal building material for a summer cottage, especially for building a fence.
At the same time, a fence made of plastic bottles can be of several types!

According to the method of using the plastic bottle itself and its parts, the following types of fences from a plastic bottle can be distinguished:

- from a whole bottle and cap: usually in this form a plastic bottle is used to create a capital thick and durable concrete fence-wall. In this case, the plastic bottle itself is also filled with a cement-sand mortar: a kind of cheap and quickly obtained "brick" is obtained.

-from parts of the bottle itself: usually, the top of the bottle is cut off and only a flat "glass" or only the bottom is used. Fences of various types are obtained from such plastic material. The principle of fastening the very part of the bottle is a wire frame.

- from plastic bottle caps: it turns out very bright and beautiful fences - real works of art that fit perfectly into the design of any suburban area. To fix the covers, you also need a frame: either wooden or wire.

By appointment, fences made of plastic bottles and their parts can be

Functional: Considering that a plastic bottle, plastic, is very practical in itself, a fence made of plastic bottles performs many functions:

- hide from prying eyes, as in the case of a capital fence made of concrete and plastic bottles.

- demarcate territory at the same time, without obscuring the space of both your site and the adjacent neighboring territory, because a plastic bottle, for the most part, is a transparent material.

- protect the territory of the suburban area from snow drifts: because, firstly, a fence made of plastic bottles is a fence - an obstacle in the way of a snow whirlwind, and secondly, a fence made of plastic bottles is a means for quickly melting and warming up the earth around it (i.e., snowdrifts formed during the winter on one side of the fence made of plastic bottles, they will melt quickly and without a trace with the advent of the spring sun, and will not lie like a compressed ice block along the borders of the personal plot almost until May).

There is an opinion that a fence made of plastic bottles is a flimsy and not entirely aesthetic design that falls apart after the first season of use (regardless of whether it is winter or summer). What can be the answer to this? Yes, it happens. But! The same law applies here: you can’t save on good things or when creating something worthwhile!

Do you want a durable fence made of plastic bottles:

- do not save on the strength of the frame (choose strong and durable materials: wire, wood).

- do not save on the bottles themselves - their quantity, because the more bottles you use, the stronger, and heavier (the wind will no longer blow away) the design itself, the less it is subject to fading and deformation in the sun.

Decorative: almost any fence made of plastic bottles in itself is already a decor and beauty, if everything is right and well thought out. The decorativeness of any fence, through the use of plastic bottles and their parts, can be achieved as follows:

- using caps from plastic bottles, creating panels and paintings on the walls.

- using the alternation of the color of the bottles, creating whimsical patterns of stripes and patterns.

- using plastic bottles, as a landing site, as a climbing or bush ornamental plant, creating the illusion of a hedge on a wall frame or creating real vertical, but at the same time very pretty beds with herbs such as parsley and dill.

DIY plastic bottle fence

How to make a fence from a plastic bottle is a rhetorical question, because. everyone can find and choose their own, original way and improve it, adapt it to their own special conditions.
And we will only give you materials to push your creative thoughts!

Here are a few ways to build a fence from plastic bottles, look ... and create functional ones on your backyard. at the same time, masterpiece fences made of plastic bottles and their parts!

Categories

Popular