We make tires with our own hands. Crafts from tires: flower beds, flower beds, figures, garden furniture. Ideas for decorating your summer house

Tires are not a material that can be easily processed. It is a rigid product made from a range of elastic yet durable elements. Processing must be treated carefully, carefully, observing safety precautions. It is advisable to involve children in the work only at the final stage of creating crafts.

For work you will need:

• electric drill, a set of drills;
• jigsaw, grinder;
• paints, brushes, solvent;
• self-tapping screws, sets of nuts, bolts, washers.

Tires can be crafted into various items. Can be used for:

• economic needs;
• creating a decor of the territory;
• play area equipment.

Household crafts

Most often used for caring for animals, gardens. When breeding poultry, they are used as drinkers, feeders. For arrangement, they are cut into two halves, put on the walking area. Drinking bowls, feeders, it is desirable to install on stands. Tires can be used as perches. Manufacturing is elementary, it will not cause difficulties during creation. It is enough to put a few tires, fill with straw, hay.

Bed arrangement

Of these, it is convenient to equip beds for vegetables grown in the bush way. To make the base of the beds, the middle is cut out on both sides of the tire. The resulting side is installed at a certain place in the garden. Filled with earth and fertilizers. Plants are planted in the created bed.

For growing cucumbers, tomatoes, eggplants, car tires are preferable. Lettuce, parsley, celery should preferably be planted in beds equipped with truck tires.

Furniture manufacturing

Furniture is a necessary household item. Tables, ottomans, chairs are always in demand. Manufacturing is not difficult, but the process is longer and requires decoration.

Materials, accessories:

• thick plywood, chipboard;
• jigsaw, drill;
• self-tapping screws, a set of furniture bolts with nuts;
• foam rubber;
• glue for plastic, foam rubber;
• the cloth;
• furniture stapler;
• enamel paint.

Process of creation

To make a table, you will need three tires. For the manufacture of a pouffe two. We fasten the autoshines with the help of self-tapping screws or bolts to each other. From plywood, chipboard we cut out the countertop, pouffe seats. We glue foam rubber on the seats, we cover it with a cloth, we pin it with a stapler to the seat. We fix the countertop with screws and bolts. We paint the details of the table, pouffe. Leisure area furniture is ready.

Territory decoration

A neat view of the territory near a residential building always pleases people. Landscaping is a necessary, pleasant activity. Beauty, originality of lawns, paths cause a feeling of respect, add pleasant impressions. Most often, flower beds and planters are equipped to create decor.

Required details:

• tires;
• plywood, chipboard;
• dye.

Manufacturing procedure

A circle covering the bottom of the tire is cut out of plywood, screwed to the base with screws. The manufactured container is painted. After drying, it is exposed on the land. It is covered with earth, fertilized, planted with flowers. Such flower beds will ennoble the entire territory of the site.

A flower bed made up of several tires looks impressive. A flower bed can consist of several rows. The easiest option is two-row in the form of a flower. In the central part, flowers are planted, which are the basis of the plan. Flowers are planted at the bottom, grass creating a general background.

We make pots

For manufacturing you will need:

• specified tools;
• tire;
• rope;

Creation order

On the tire with chalk, draw a straight line along the upper edge of the inner rim. Cut off the remaining sidewall with a jigsaw. We turn over to the other side, we carry out the same manipulations. It turns out a rubber basket. We paint, after drying we hang out in the allotted place. We fall asleep the earth, we plant flowers.

These are the simplest elements. Complex elements include animal figurines, cartoon characters and fairy tales. But they are also craftable. Fantasy, patience, desire will help to accomplish any task.

Equipping the playground

The children's playground is a special place. It should be equipped with various gaming places, please the eye with an interior, ensure the safety of forwarding. The use of tires will ensure that these conditions are met.

From tires are made: trees, sandboxes, labyrinths, swings, tunnels. On sports grounds, they are used as airbags when equipping jump zones. For the entourage, we decorate the site with figures of our favorite cartoon characters, animals.

To create a swing you need:

• tire;
• chains, rope;
• 4 staples;
• drill.

Manufacturing procedure

We paint the tire with a bright color. On its upper part we drill holes equidistant from each other. In the holes we fasten the brackets with bolts. We hook chains to the brackets or tie ropes. We hang it on the crossbar, a branchy tree.

The second version of the swing. Used:

• one tire;
• wooden beam;
• board;
• self-tapping screws;
• doorknobs.

Manufacturing procedure

Cut the tire into two equal halves. On the cut line, we install a beam equal to the diameter of the tire, attach it with self-tapping screws. We paint the outer, inner surfaces. After drying, we attach a polished, painted board to the timber. On both sides of the board, at an equal distance, we fasten the door handles. The swing is ready, we install it on the platform.

Craft "Cheburashka"

One of the favorite children's characters is Cheburashka. This cartoon character is always happy to be present.

For arrangement you will need:

• 3 tires;
• paints;
• plywood sheet;
• self-tapping screws;
• small pieces of furniture.

Figurine production

Tires of cars are used for creation. We insert plywood into two tires, which we attach with self-tapping screws. Paint the base dark brown. We paint the plywood inside the tires with a lighter color scheme. Tires with inserts are fastened together. We install vertically on the tire laid horizontally. We cut out the ears from plywood, fasten the figures on the head with brackets. We apply the elements of Cheburashka's face with paints.

There are many photos of tire crafts on the Internet. They will help you make decisions when making crafts. This activity will bring benefit to the family, joy. Inspire new creativity.

Where to put old tires? This question worries many, in Russia every year about a million car tires are thrown away. Summer residents actively use this resource to create crafts from tires for the garden, they also actively decorate front gardens in city courtyards.

Crafts from car tires

The most common version of tire crafts is flower beds. In order to make a simple flower bed, it is enough to use a small piece of plywood, tires and paint.

We cut out a circle from plywood, in diameter it should cover the bottom of the tire, with the help of self-tapping screws we fasten it and paint the resulting flower bed in any color. When the paint dries, we set the flower bed in the right place and cover it with earth, plant flowers.

Large flower bed

Necessary materials:

• Three tires
• Gloves
• Wax pencil (you can use chalk)
• sharp knife
• Electric jigsaw or grinder
• Galvanized nails
• Paint (one or more colors)

On each tire we draw petals for cutting, if you use a wax pencil, it will additionally lubricate the incision site. The ends can be made smooth or pointed, cut out the contours of the petals with a knife.

We cut the resulting blanks into two parts with an electric jigsaw, after which we turn each part inside out. We connect the parts in pairs with galvanized nails, and then assemble the flower bed together.

You can also use four parts (two tires) for a flower bed. We paint the flower bed in one or more colors and, after drying, set it on a flat area with the petals up. We fill the inside with soil and plant flowers.

Tire coffee table and ottoman

Materials:

• Plywood
• Tire
• self-tapping screws
• rope rope
• Castors (for version with table)
• Thermal gun

It is necessary to cut out two circles from plywood, with a diameter covering the tire, and fix it on the wheel with self-tapping screws. We wrap the workpiece with a rope so that the layers fit snugly against each other, fixing it with a heat gun. For the top, we twist the rope in a spiral, fix it with a thermal gun.

The ottoman is ready, for the coffee table we fasten the wheels to the bottom. It looks beautiful and unusual, suitable for apartment use, the only drawback can be the weight of the product.

All work must be done with gloves and with extreme care to protect hands from cuts. There are a lot of options for crafts for a vegetable garden from tires, you can make small fences, large flower beds and seedlings from them, they also make garden furniture (tables and chairs), various ottomans on the veranda.

Crafts from old tires for children

It is possible to make a playground with your own hands using tires. Of these, you can make two types of swings, sandboxes and decorations for the site.

A large sandbox can be made by analogy with the previous master class with a large flower bed, if you add one or two more tires, you get a sandbox for the entire yard.

Swing #1

Necessary materials:

• Tire
• self-tapping screws
• Dye
• Old seat belts

We paint the tire and wait for the paint to dry completely. We close the hole inside the tire with seat belts, fix them with self-tapping screws. On both sides we oblige the tire with chains (strong ropes and cables can be used). We fix the swing on a tree, if there is no suitable place, you can make the basis for a swing from a bar.

Swing #2

Necessary materials:

• Tire
• Board and timber
• Bulgarian
• self-tapping screws
• Dye

For the swing you will need a large wheel, cut it in half. We cut out two beams to strengthen the base of the swing, the size of the width of the tire. From the board we make seats for the swing, the board should protrude 40 cm on both sides. We paint all the blanks in the desired color.

After drying, we insert the beam into the tire, from the side of the cuts and fix it on both sides with self-tapping screws. After that, we evenly expose the board for sitting and fasten it to the reinforcing bars with self-tapping screws. Swing handles can be made from old doorknobs, cable or rope. From the second part of the tire we make the second swing.

It is easy for creative people to come up with and make useful things out of anything. Tires can be easily used to create furniture and more. Various photos of tire crafts can be found on the Internet, with their help you can find inspiration and improve crafts, adapt them for yourself, or make the same.

DIY tire crafts photo

Today, people are trying to decorate their yards, summer cottages and gardens from whatever they can. Designers received a lot of ideas that can be safely translated into reality. The use of improvised materials such as bus tires has led to the fact that real hand-made masterpieces are located in the gardens and gardens of the plots.

It is worth noting that crafts for the garden and garden can embellish any area. It can even be a sandbox in the yard, a flower bed, a swing or a garden bed.

For example, to make a flower bed from a car tire, you don’t need to guess too much. A bus tire is simply taken, covered with earth. But it won't be a masterpiece. Now, if you take paints, decorate the tire from the outside, and even better - put three wheels - one on one - then you get a real masterpiece.

If you want to do something unusual, then you can take tires of various diameters. With the largest one, we begin to lay out the rubber from the bottom.

You can even fix an improvised flower bed on a tree. To cover the tire on one side, you can use any material that can withstand the weight of the earth.

photo: do-it-yourself parrot from a tire

Fantasists even came up with two cups that are made of tires and stand on the site. The main bowl is cut out, and the handles can be metal tape.

Another idea is the figures of animals from used car tires. They will give mood to your guests in the garden or in the garden.

The most popular figurine in garden crafts is the swan. To make a bird, you need a tire that does not have a metal cord.

This will make it easier to cut the rubber. We make the markup of our future crafts. We cut the tire with a very sharp knife or hacksaw. To strengthen the swan's neck, use metal rods. At the end we color the bird.

From old car tires you can make a turtle, a zebra and even a horse. To make a beast, you need to dig a bar into the ground along with a tire. In order for the animal to look like itself, it is necessary to give certain colors with paint.

Furniture made from car tires will look great at their summer cottage. You can even make comfortable options using various soft linings. Everything that can be useful in this craft is used. If you like to relax in the garden in the evenings, then a few personal chairs that can be placed close to each other are best suited.

There can be no difficulty in making crafts. We fantasize, and it will take you no more than an hour to do everything. It is unnecessary to take thick and rough tires, the reinforcing fiber of which can cause wounds.

Each of us remembers the swing from car tires in the garden from childhood. Pastime then could not do without a swing. And now you can do it with your own hands from old tires. It is worth noting that a swing made of tires will be safest for a child than a swing made of wood or metal. So what do you need to make a tire swing? First, we find a branch that will be strong and will be tilted towards the ground. Secondly, we collect such tools: a knife, a hacksaw, a rope or chains and the tires themselves.

At the end of the rope we make a loop. You need to make sure that the knot is strong. We put the tire vertically. The rope is passed through the wheel, firmly tied above the ground at a height of a meter.

DIY flowerbeds in the garden

The real fun for kids is the tracks and the different paths that can be made out of tires of different sizes. You can make a regular track on the site out of tires. To do this, you need large tires - for example, from a truck. It is only necessary to cut off the part with the tread, and then spread the strips on the site, additionally fixing them to the ground.

Photo: borders for beds in the garden and flower beds in the garden

Photo: multi-level beds for strawberries Paths in the garden with their own hands

DIY crafts - flower beds

( ArticleToC: enabled=yes )

Tire recycling has become an integral part of our lives. Everyone solves this problem in their own way. Tire car for the playground! Many people like this idea.

The kids are just delighted with such crafts, and adults look with admiration. Given that the tires are resistant to negative external influences, this design will please the eye for more than one year.

Parents with small children will need a little time to arrange a playground in the country or on the street and do not need any financial expenses. And the kids will play without distracting their parents from important matters.

You can make crafts for such a site yourself, even if you have never done this before. Ideas and order of work can be peeped on the Internet. More often, plastic bottles and tires are used to make them. There is nothing difficult in manufacturing.

The main thing is desire and a little time.

You will not need to spend money on purchasing expensive materials, since car service workers will be happy to give tires, which usually accumulate a sufficient amount of them. What craftsmen just don’t make from tires: swings, sports equipment, flower beds, etc.

Types of cars

Transport is a constant success among boys, and even modern girls. Therefore, you can start by making a car for children. A tire car for a playground can be of various brands (types) - from very simple to quite complex.

Instructions for making a car from wheels

The easiest option would be to dig a steering wheel from a real car and a seat into a square of tires.

The place for the site where the craft will be installed is better to choose a lighted, spacious, located near the house. The best coverage would be a backfill of sand or a lawn, which will have to be cleared of stones and glass in order to protect the kids from injury.

Shop machine

It won't be hard to make it. To do this, having cleaned and painted the board well, it is fixed between tires of the same size. These will be the rear wheels. In the same way, you can do the front. But you can install only one wheel in the center so that the craft resembles a racing car.

The depth of the pits for the wheels of the car should be such that the latter are hidden up to the disk. Then the transport will be stable. After filling them with earth, tamp it well. It is better to dig in tires with disks. But, if they are not there, you can replace it with plywood to give the structure rigidity.

Linoleum is used to simulate the floor, but it can be replaced with plywood. So that the linoleum does not pick up the wind, it is advisable to dig the steering wheel into the ground through it. The tilt of the steering wheel is selected in accordance with the growth of a particular child.

Tire Truck

You can make a children's sandbox in the form of a truck.

Seat manufacturing

The seat can be made from one tire or by putting two on top of each other.

In the simplest version, they are limited to mounting on plywood tires. If you want to make it more comfortable, you need a back. You can upholster the seat with something soft - foam rubber, carpet, blanket.

A plastic chair that is not used at home is suitable, wooden seats from chairs, old chairs. Having sawed off the legs, they are fixed, fixing with self-tapping screws.

Details are washed and dried well before painting. After that, a brand new car is painted in the preferred colors.

To give the craft a greater resemblance to the original, headlights are added. They fit jar lids.

And the next model is for the kids of the whole yard, because it allows a big company to go.

What else will help to make it look like a real car?

The doors attached to the craft will undoubtedly make the craft look like a real car. To play with a machine for a large number of children, they make several rows of seats (2-3). If there is an extra tire, make a spare tire, attaching it to the back and writing the number with paint.

The roof to the car, covered with linoleum, in addition to giving a resemblance to a real car, will protect from sunlight and light rain. To fix it, you will need wooden bars, folded in the form of the letter "P". All you need is 3 pieces. Two structures are installed in the rear above the machine (it is better to dig them into the ground), the third is closer to the front. They are connected with bars from above to get a horizontal frame, on which linoleum is fixed with screws or nails from above.

For a racing car, you need to find 5 tires of the same size. A little work of parents and they will turn into a wonderful car that will not leave a child indifferent.

Three tires are enough to make a car, as in the photo below. On it, little racers will not be able to rush through the expanses of the planet, but they will play with pleasure.

For "cool" kids, you can make a motorcycle. The truth will have to be imagined. But the happy faces of the owners of such bikes will be a reward for caring parents.

Video: Racing car made of wheels, tires.

It is always nice to make something beautiful and useful out of junk things. A good example of such creativity is beautiful flowerbeds made of tires. They are easy to make and the benefits are enormous. But the fantasy of country masters is not limited to this. From old wheels, which often just lie on the road and pollute the environment, they make street furniture, sculptures for the garden, and even rebuild small children's towns.

Such a simple and unsightly material at first glance, like old car tires, in fact, seems to be specially created so that every summer resident can feel like a real artist and decorate his site with real designer flower beds and original author's sculptures. Without exaggeration, anything can be cut out of tires. Such crafts, along with those made from plastic bottles, will delight the eyes of the owners and guests of the cottage all year round, and most importantly, they will not require special financial investments.

It's also nice that the benefits of the idea of ​​making DIY crafts from tires are twofold: on the one hand, we recycle the wheel that polluted the environment, and on the other, we get an original garden decoration or flower bed.

Crafts from used rubber tires amaze with their variety and how rich the imagination of their authors is. Here are the most common ones:

In the photo - flower beds from tires

Small flower bed. The easiest way to make flowerbeds from tires is to leave the tire as it is, just brightly decorate it and fill it with earth. Nothing complicated. Even a weak woman or child can handle this, and such a flower garden will look great.

In this photo - cups made from old wheels

Flower beds from old tires in the form of various objects. Make them harder. The tire is cut into two unequal parts and the larger one is turned inside out. It is worth noting that the edges of the tires can be made in various shapes, it's all about imagination and sleight of hand. In this technique, flower beds are made in the form of a mug, flower, vase. A huge rubber cup made of tires looks very funny. And some craftsmen, in this way, build a whole tea set on their site.

Turtle from old wheels

Flowerbeds and sculptures in the form of animals and fairy-tale characters. A funny tire frog, a kind gnome, a mysterious unicorn, beautiful swans, a three-headed dragon, a turtle, a luxurious carriage, a huge telephone - it is easier to list what is not made from this affordable material. The only condition is to think over the composition from the very beginning so that there are no unpleasant surprises later.

In the photo - multi-tiered flower beds or berries

Multi-tiered flower beds of several tires. The simplest in execution is three-tier, but the number of parts can be more. Several tires of the same or different sizes are placed on top of each other or in a checkerboard pattern. The well of tires looks impressive, stylized as a real one and equipped with all its inherent attributes: a chain, a shaft with a visor, a bucket. Such a flower garden can also be used as a vertical bed for growing berries and vegetables.

Flowerbeds from tires for strawberries

A flowerbed for strawberries from tires will take up a minimum of space and give a rich harvest. It is perfect for growing seedlings, herbs, peppers. From such a flower bed, you can make a fence for a raspberry or currant bush, or make several of them and delimit the garden into cultural zones. It is worth mentioning that a tire well is often made not only decorative, but also masks a drainage pit or septic tank.

Experienced craftsmen and craftswomen know many secrets that help them create garden sculptures and flower beds from tires with their own hands. They understand better than anyone how to make unique and inimitable author's crafts out of old rubbish that no one needs. Here are just a few of those secrets:

• Imported tires are best suited for work, as the rubber on them is softer and easier to cut. But in their absence, domestic products will fit. In principle, they are quite easy to process and allow you to give crafts from them a different shape.
• Tires designed for use in winter conditions are more pliable, easier to cut and easier to handle than those used in summer.
• The longer the tire has been used and the more worn it is, the thinner, softer and easier it will be to work with: cut and turn.
• Before you start creating crafts, the material must be prepared: thoroughly cleaned of dirt, and degreased before painting.
• To cut car tires, use a sharp knife with a thin butt. You can check how well it is sharpened by running the blade over a notebook sheet, holding it on weight. If the knife does not cut or tear the paper, it is not sharp enough.
• It is more convenient to cut a car tire for garden crafts if you periodically lubricate the knife with machine oil. So it will be easier to enter the rubber. The oil is suitable and used.
• When you need to cut out some curly elements, markings are applied to the tire. It will help to achieve a more accurate and accurate result. It is most convenient to apply it with ordinary white chalk, in extreme cases, with a marker.
• The durability of the craft depends on what paint to paint the rubber with. For old wheel tires, both car paints and any outdoor paints are suitable.
• Before painting a tire, it is recommended that its surface be primed. A primer with the addition of a small amount of PVA will increase the strength of the coating and reduce paint consumption.
• Paints in aerosol cans speed up the staining process up to 20-30 minutes, and the painted layer itself is made more uniform.
• Decorative trim can be made from improvised materials. For example, glue the surface with pebbles, bottle fragments, or lay out pictures from colored plastic bottle caps.

It is better to paint a flower bed from a tire not only from the outside, but also from the inside. So they will look more aesthetically pleasing, and black rubber will not be visible from the inside.

Of course, each master has his own secrets, and it is unrealistic to list them all. And when you get into this exciting business - tire sculpture, they will certainly appear in yours.

Several workshops on making crafts from old tires

As mentioned above, tire crafts are diverse. Their appearance and purpose are limited only by the imagination of the master. We suggest you familiarize yourself with the basic models. After reviewing them, you will learn how to make a flower bed out of tires with your own hands and you will be able to create original, different and useful garden accessories yourself.

Simple flower bed

A small flower bed, made like a daisy from a single tire, is the simplest basic model. You can make several such flower beds, arrange them hardly and decorate the approach to the house. Sometimes they are placed on paved or paved areas.

We will need:

1. One old tire.
2. Sharp knife.
3. Marker or chalk.

Mark the place of the cut with a marker. We will cut the tire along them, from thickening to thickening.

Before cutting tires, make sure that they do not have metal cords that can ruin the knife. Usually they are inserted into tires for trucks.

We cut the tire around the entire circumference with even zigzag petals of any shape of your choice (triangular, oval, semicircular).

We turn the tire over and work with its reverse side. Leading the knife along the thickening, cut out a circle from the back of the tire.

Then, around the entire circumference inside the tire, approximately every 20-25 cm, we make transverse cuts from the cut edge to the bend (the end of the tread).

After that, the tire must be turned out. The flower bed is ready. It remains only to paint it, giving it a more attractive look, fill it with earth and plant plants.

For more clarity, watch the following video:

Garden flowerpot from an old wheel

From an old wheel, you can make a beautiful garden vase in a short time.
Such flowerpots look better in a pair in front of the house, on opposite sides of the door or porch. Consider a step-by-step master class on their manufacture.

We will need:

1. Tire with disk.
2. Sharp knife.
3. Chalk or marker.

With a chalk or a marker along the entire frontal circumference of the tire, we mark a zigzag line, along which we will begin to cut. Thanks to her, the flowerpot will look like a large flower with many petals.

Cut the tire along the marked line with a sharp knife. To facilitate the process, the knife is periodically dipped in engine oil (used oil is also suitable).

After the wheel is cut, we check if there are any sections that are not completely cut out, and proceed to turn it inside out. It is better to do this together with an assistant, slowly, in parts.

After we managed to unscrew the tire for the future flower bed, it turned out that there is a chamber in the wheel. It needs to be cut out and thrown away.

The vase is ready. His bowl came from the main part of the wheel. It is not necessary to remove the disc from the tire. It serves as an elevation and stand for the vase, and the remains of the tire at its base provide additional support.

We just have to clean, degrease and decide how beautifully to paint our new garden vase. When you fill the bowl with earth, do not forget to put a gasket on its bottom so that the earth does not spill out and make several holes in it to drain the water.

Video instruction for making a flowerpot:

Swan from an old tire

The most popular garden tire sculptures are swans. Usually they are placed near an artificial pond, which gives the site a stunning look. You can plant grass in the bird itself, then it will give the impression that it is peeking out from behind the vegetation. A detailed step-by-step instruction with a photo will help to make it.

We will need:

1. Sharp knife.
2. Electric drill for making holes for entering the rubber of the knife.
3. Sander or file.
4. Electric jigsaw.
5. Chalk or marker (marker is better).
6. Wire 5-6 mm in diameter (hard, to shape the neck of a "swan").
7. Plastic clamps (for shaping the head).
8. Roulette.
9. Gloves.

According to the scheme, we mark the contours of the future swan on the surface of the tire according to the following video, in which the author uses sizes in inches, calling them in the international measurement system - inch. Inch (1 inch) = 2.54 cm.

How beautiful and accurate our sculpture will turn out depends on the accuracy of the markup.

Let's start cutting. At the initial section, we drill 3-4 holes with a drill at a distance of 3-5 cm and cut the tire between them with a knife. We insert a jigsaw into the resulting cut and begin to cut out the swan.

After all the contours are cut out, we turn the tire out. We try to do it carefully, because careless movements in the thinnest places can tear it.

To make the bird's figure look more neat, we smooth all the cuts along the contour with a grinder.

To shape the neck of a swan, we insert a wire into it. To do this, we drill holes in the center of the neck and to the end of the body every 20 cm. We impose the wire and fix it in the holes with soft staples.

We form the head. We make longitudinal cuts and holes, as shown in the photo, and using the same wire or plastic clamps, we shape the head of a swan.

Our tire swan is ready. It remains to paint it and make a stand.

The swan can be painted white or not painted at all, leaving it black. We make the beak red. Swans look very nice in a pair: black and white.

Without a stand, soft rubber swans will not stand. As it, you can simply take any tire and paint it, for example, in blue. Thus, it will symbolize the pond. And you can not be too lazy and make it curly.

We make a figured stand in the same way. We mark the contour on the tire along which we will cut, cut the tire along it, turn it inside out and paint.

In a similar technique, any figures can be made from tires: animals, birds, fairy-tale creatures.

But, if you don't want to mess around with complicated markings and cutting, you can do it easier. For example, to assemble a cute frog from whole tires.

In the photo - a flower bed in the form of a frog

A frog made of tires is very simple. From one or more tires, a larger body and head are assembled, from small wheels, for example, from a baby stroller - eyes, and from rubber scraps of paws.

flowerbed chamomile

A decoration that is easier to make than this flower bed is hard to come up with. Despite the fact that it will need several car tires, it can be assembled in just 15-20 minutes, it looks pretty, neat and will never be superfluous.

We will need:

1. Three old tires of the same size.
2. Sharp knife or grinder.

All tires, having previously marked the places of cuts, are cut in half. Before cutting, find out if there are metal cords in the rubber. The knife will not take them, so use the grinder.

To give the future flower bed aesthetics, you can paint the tires. It is better to do this in advance, immediately after cutting.