Where to buy plastic windows? We choose a reliable supplier of PVC double-glazed windows. Plastic windows: customer reviews of firms. Rating of plastic window manufacturers Firm good windows reviews

Updated: 24.07.2018 16:30:19

Plastic windows are confidently replacing wooden structures from the domestic market. And although in Europe the number of connoisseurs of natural material is gradually growing, in Russia this fashionable trend has not yet been traced in sales volumes. Only wealthy people can afford window systems with traditional carved architraves. The popularity of PVC products is explained by durability, availability, good heat and noise insulation properties. In addition, plastic does not require special care. Today, the Russian market has an abundance of PVC window systems. But if earlier it was mainly products of foreign brands, today the share of domestic manufacturers has increased significantly. At the same time, the choice of windows for consumers was also difficult. In this matter, expert advice is indispensable.

How to choose plastic windows

1. One of the key points in the selection of plastic windows is profile type. There are deaf systems, rotary structures and tilt-and-turn options. Windows with a tilt-and-turn mechanism look more advantageous, but they are more expensive. Often, consumers order combined window units, where one sash opens and the second has a blank design. This is explained by a reasonable desire to save money. In addition, fixed sashes have the best heat and sound insulation qualities.
2. The heat and noise insulation properties of PVC windows depend on number of cameras. The more of them are built into the profile, the better the insulating qualities. But the price is also getting higher. For the middle lane, 2-3 chamber structures are enough. On an unheated loggia, you can limit yourself to one camera. But residents of the northern regions have to order window blocks with 4-6 cameras.
3. Glass has undergone a serious modernization. Popularity is gaining low emission products, which are saturated with silver atoms. They are characterized by high light transmission and excellent thermal insulation properties. The flame of a match in such glass has a purple hue.
4. You should not save on such an element of a plastic window as fittings. It is, in fact, a consumable item. First of all, this applies to tilt-and-turn structures. Quality handles, curtains and locks will last more than 10 years.
5. Today, white window blocks no longer attract a glamorous society. Some manufacturers, meeting them halfway, produce painted profiles. In a rich color assortment, you can even find models under the tree. In this sense, the buyer will have to independently select a window for the external or internal design of the house.
6. Along with the choice of window blocks for an apartment and a house, you should take care of their installation. Often, manufacturers provide a guarantee for their windows only if the installation is carried out by official representatives. It is also important to read the terms of the warranty, where pitfalls may be hiding. At the same time, it is worth asking about finishing the slopes, perhaps when buying and installing several windows, the company will make a pleasant discount.

Our review includes the best manufacturers of plastic windows. When compiling the rating, the following criteria were taken into account:

1. product innovation;
2. technical specifications;
3. price policy;
4. the development of the trading network;
5. expert opinion;
6. consumer reviews.

Table of advantages and disadvantages of plastic and wooden windows

Rating of the best manufacturers of plastic windows

The best manufacturers of plastic windows in terms of price-quality ratio

The average domestic consumer selects plastic windows of the budget or average price range for their housing. It should be noted that thanks to the creation of joint ventures in Russia, windows of leading foreign brands have become available. The experts highly rated the products of the following manufacturers.

VEKA

Leadership in our rating was provided to the German company VEKA by several advantages over competitors at once. First of all, it is worth noting the dynamism of increasing volumes in the Russian market. The company came to our country in 1999, but in such a short time managed to bypass experienced manufacturers. It was possible to win back a part of the domestic market through the use of high-tech equipment, strict control at all stages of production and cooperation with Russian partners.

The logical result was the receipt of the European RAL certificate, which confirms the high quality of the products. Now the company has focused on the production of class "A" window systems. The entire model range is reliably protected from the effects of any weather phenomena and is suitable for any climate.

Advantages

dynamic promotion;

high-tech production;

quality products;

acceptable price.

disadvantages

• not detected.

rehau

One of the most uncompromising competitors for the winner of the rating is the well-known German company Rehau. A large manufacturer has its own laboratories in which new models are developed daily. But only a small part of the samples will be further approved and put into mass production. Therefore, the search for ideal designs of window systems continues without stopping.

Rehau is famous for its well-established production cycle, where each stage is supervised by experienced controllers. The dictatorship of technology made it possible to minimize the percentage of marriage. And this led to lower costs for dismantling, warranty repairs and re-installation. However, maintaining a high quality product without reducing the price is not enough to increase sales.

Advantages

development and testing of new models;

rigid industrial discipline;

low marriage rate.

disadvantages

• high price.

KBE

Another German manufacturer KBE boasts the most affordable prices. The company focuses on the wallet of the average Russian buyer, while maintaining good quality profiles. The range of window systems is also very diverse. The company offers windows both for buyers in the southern regions and for residents of the Far North. To reduce the final price of window profiles, KBE organized a full production cycle in Russia. Therefore, the low price applies not only to the profile, but also to fittings.

Experts gave the manufacturer only the third place in the rating for flaws in the windows of the Russian assembly. First of all, this concerns the quality of plastic, which turns yellow over time.

Advantages

thoughtful pricing policy;

a wide range of windows;

reference quality products from Germany.

disadvantages

• low quality plastic in Russian windows.

Affordable prices and full adaptation to Russian climatic conditions are offered to the buyer by the Austrian manufacturer Proplex. Experts highly appreciate the quality of plastic, which is durable and reliable. Over time, the PVC profile does not turn yellow, its technical parameters also remain unchanged. Therefore, the manufacturer has many customers who install windows in apartments and private houses.

The outdated appearance of window profiles did not allow the company to reach the top three in the rating. On the one hand, this allows you to keep the price low. But many potential buyers, having appreciated the design of the windows, prefer other manufacturers. In addition, Proplex does not have an international quality certificate, which hinders the promotion of products outside of Russia.

Advantages

affordability;

plastic strength;

PVC does not yellow over time.

disadvantages

outdated design;

there is no international quality certificate.

The German company Trocal is considered the oldest European manufacturer of plastic windows. The first PVC profiles were produced back in 1954. Since then, the production facilities have been updated and improved more than once. Experts consider the unique strength, rigidity and resistance to deformations to be the advantage of the windows of this company. The design of window blocks does not cause any complaints from users. The entire model range is distinguished by a certain sophistication, which is rare among budget systems. In general, the company deservedly gets into our rating.

In the reviews, consumers point out a number of minor flaws. It was they who did not allow the manufacturer to rise above. Ice formation is noted at -17 ° C, hooks for mosquito nets are not reliable.

Advantages

deep historical roots;

strength and reliability;

exquisite design.

disadvantages

not reliable fittings;

poor window alignment.

The best manufacturers of plastic windows in the premium segment

The best indicators of reliability, durability, heat and sound insulation are demonstrated by premium class plastic windows. Their purchase is justified not only in the construction and repair of offices or administrative buildings, but also in the construction of private houses. The best manufacturers in this segment today are the following firms.

The Russian company MONTBLANC is a relatively young player in the domestic market. But over the ten years of activity, the manufacturer has managed to create 2 large modern enterprises and its own scientific base. Thanks to modern technology and the high quality of raw materials, the output is products whose durability reaches 60 years. MONTBLANC windows are distinguished by their elegant appearance, the profile and glazing beads have rounded corners. The Russian brand boasts a developed dealer network, which allows it to grow its customer base.

The consumer is offered 7 different profiles, each of them is designed for certain climatic conditions. Despite the lack of a quality certificate of the international ISO standard, the company deservedly becomes the winner of the rating.

Advantages

modern production;

own scientific base;

recognizable appearance;

affordable price.

disadvantages

• no ISO quality certification.

One of the largest manufacturers of plastic windows in the world is the Belgian concern Deceuninck. It was founded in 1937 and, in terms of its popularity, the European manufacturer compares favorably with Russian brands. Today the company is in the TOP-3 in the global PVC window market. In Russia, a joint production was created, which managed to be awarded a prestigious award for the development of a new double-glazed window "Favorite Space". One of the main advantages of Deceuninck window systems is the availability of quality certificates of international standards. But the other side of the coin was the high level of product prices, which significantly limits its use in Russia.

Experts gave the Belgian-Russian manufacturer the second place for the appearance in the assortment of the budget line of windows. But while they are inferior to competitors, both in design and quality.

Advantages

high quality Belgian windows;

development of new profiles;

the presence of an international certificate.

disadvantages

• high price.

The Austrian company Plafen is also among the top three manufacturers of premium plastic windows. The quality of double-glazed windows of this company suits the most picky buyers. There are 5 categories in the catalog, which have a letter designation. But the main feature of the manufacturer was the decoration of profiles for various types of wood. Such a move made it possible to give the windows a more expensive look, and it becomes easier to choose the right color for the interior. The durability of Plafen products is at least 60 years; with high-quality installation, consumers do not notice freezing or drafts.

Many buyers are deterred by the high cost of window systems, so the Austrian manufacturer focuses on selling windows to Russian businesses.

Advantages

wide model range;

exclusive design;

durability over 60 years.

disadvantages

have to be adjusted periodically.

high price.

The well-known German brand Salamander is located close to the top three of the rating. The window blocks of this manufacturer are among the best in the world. Neither experts nor consumers complain about the quality of products. The profile is given a 5-year warranty, and the durability of windows is more than 40 years. The entire line has a snow-white glossy surface. It was the PVC recipe that became the hallmark of the manufacturer. Over time, the plastic does not fade or turn yellow. Since there are no micropores on the surface, the windows are not afraid of dust or smoke.

The only drawback that did not allow the company to rise higher in the ranking was the large number of clones. Counterfeit products are made in an artisanal way, which is why the buyer has a high probability of installing a fake in the house.

Advantages

eco-friendly materials;

perfect whiteness and gloss;

ease of maintenance.

disadvantages

• a large number of clone companies.

The appearance of the Samara Window Constructions company was facilitated by the German concern Profine. Joint production has been organized in Russia since 1999. SOK uses all the developments of a well-known European concern, which has its own production under the KBE brand. Samara windows have a good level of reliability, they can serve for a long time if properly installed. Experts consider the company promising in terms of development, as the range of profiles and the client base is constantly growing. The company actively cooperates with other manufacturers of window systems.

Advantages

European profile developments;

reliability and durability;

acceptable price.

disadvantages

• plastic turns yellow after a few years of use.

WDS (Window Door Systems)

Not so long ago, plastic windows under the WDS (Window Door Systems) brand appeared on the Russian market. A young Ukrainian company organized the production of PVC profiles in 2006, and now it is aggressively promoting its products in the expanses of the former Soviet Union. The company has deliberately set a course for the development of the markets of its neighbors, knowing the peculiarities of the climate and the financial capabilities of people. The quality of windows was appreciated by specialists and consumers, calling them the most tenacious.

WDS offers a good assortment, which is presented on the domestic market in 6 series. Each of them has a unique design, while they are easy to install and operate. A low position in the rating is due to a limited trading network. So far, the coverage area does not go beyond the Moscow region and the regions adjacent to it.

Advantages

strength and reliability;

thoughtful pricing policy;

wide model range.

disadvantages

not developed dealer network;

flap adjustment required.

The Panorama company has a fairly long experience in production and sales on the Russian market. A manufacturer from St. Petersburg has been offering consumers high-quality PVC profiles for 16 years. Experts note the optimal combination of rigidity, appearance, sound and heat insulation. Special comfort in a house or apartment is provided by 5- and 6-chamber windows. At the same time, the manufacturer manages to offer customers reasonable prices. The work of the company in accordance with the requirements of the concept "Environmental friendliness and safety" should also be noted.

While the volume of sales is limited by a passive marketing policy. The servicemen of the company are not distinguished by promptness, and in order to find out about the technical characteristics of windows, consumers have to independently elicit information from consultants.

Advantages

high quality profile;

good noise and heat insulation;

eco-friendly materials.

disadvantages

poor promotion of products;

lack of information about technical parameters.

The Russian company Kaleva stands out from the competition with a full production cycle. Operative production of windows allows you to reduce the waiting time for the client to order. In addition, the manufacturer independently develops new designs of PVC windows. The number of representative offices of the company has exceeded 80, including the capital and regional centers. Experts note the focus of employees on comfortable customer service.

Despite the fact that the quality of the plastic windows of the Russian company Krauss is at a fairly high level, the brand closes our rating. Experts note the manufacturer's bias towards the southern regions of the country. Perhaps the sharpness of PVC windows for a warm climate is explained by the location of the production site (Krasnodar). Narrow specialization does not allow the company to demonstrate a variety of profiles. It is worth noting the use of environmentally friendly materials in the production, so the products meet the requirements of the international safety standard.

Somewhat spoils the overall impression of window systems thin seal. Users note that dust accumulates over time and drafts form. The problem can be solved by replacing the sealing elements.

Advantages

quality manufacturing;

high environmental friendliness;

modern look.

disadvantages

windows are suitable only for warm climates;

short-lived seal.

Today, windows in apartments are the first thing that guests and residents themselves pay attention to. These structures are subject to increased requirements, as they must perfectly protect from the wind in winter and open well in the summer heat. In addition, window profiles must be distinguished by a long service life, stability and reliable mechanisms.

To figure out where it is better to order plastic windows in Moscow, the rating of companies, compiled on the basis of reviews and recommendations from consumers, needs to be studied as carefully as possible. According to users, well-known companies can be considered the best profile manufacturers. Some of them have opened many branches in the capital, where you can buy quality products. But do not forget about the shops where you can buy profiles and fittings from a variety of manufacturers. Let's start with the most popular outlets that received the best recommendations.

"OKNACOM"

Those who are looking for the best place to order plastic windows should definitely pay attention to this store. The company was founded back in 1996. All products are certified and have a 3-year warranty. In addition, the manufactured profiles fully meet the modern requirements of GOST. In addition to standard plastic windows, the company offers services for cold and loggias, insulation of balconies and much more. Separately, users note specialists who will not only install the structure, but also help install ebbs, window sills, mosquito nets, blinds, etc.

On the company's website you can get all the necessary information, including data on the cost of profiles. Today OKNACOM offers quality products at affordable prices. For 1 m 2 of a plastic window, you will need to pay about 3.8 thousand rubles.

"Window Factory"

Where is the best place to order plastic windows? If we are talking about the capital of Russia, then you should pay attention to this store, which offers consumers a fairly extensive list of products. Here you can buy both plastic and wooden structures. The company gives a 5-year warranty on all products. Such a long warranty period indicates that the specialists of the Window Factory are confident in the quality of the profiles. Satisfied customers say the same. In addition, post-warranty service is provided for customers. However, the prices bite a little. For one double-leaf window, you will need to pay about 13.6 thousand rubles.

"Moscow windows"

This company is also often approached by people who are looking for where to order plastic windows in the capital. This store has been on the market since 1992, and during this time a large number of satisfied customers have left positive feedback about it. The product is also guaranteed for 5 years.

In this case, the buyer can order not only the installation of a new window, but also the removal of the old profile. The store's website provides a handy calculator, so customers can calculate in advance how much the purchase will cost. On average, about 5.1 thousand rubles are required for 1 m 2 of a profile.

"Window Continent"

This company has been on the market for more than 18 years, therefore, when deciding where it is better to order plastic windows, you should also pay attention to it. The assortment of the store includes not only profiles, but also doors, as well as materials for insulating loggias. The site also has a handy calculator. Therefore, the order and purchase can be carried out without leaving home. On average, the minimum order value is about 13 thousand rubles. At the same time, customers can arrange installments and receive windows immediately. If we talk about the guarantee, then it is 5 years for the product itself and 2 years for its installation.

"European windows"

This store has been on the domestic market since 2002. Customers can purchase one of four profile systems that are in widespread use today. At the same time, the cost of profiles is quite democratic: for 1 m 2 you need to pay about 4.8 thousand rubles. In addition, the company can order loggia repairs, glazing and insulation of balconies and winter gardens.

"Rusokon"

This store has been in existence since 2005. The company specializes in the production and sale of high-quality profile structures at an affordable price. On average, you need to pay about 5.5 thousand rubles for a profile. In addition, the company is ready to provide its customers with the necessary certificates of European quality and other accompanying documents. It is also possible to pay in installments for a fairly long period of time.

When ordering glazing for an entire apartment or house, customers receive a 5 percent discount for life. The warranty for installation work and the profiles themselves is 5 years. All this applies to cheaper systems. Also in Moscow today, a huge number of branches of eminent manufacturers have been opened, where you can order high-quality products. However, keep in mind that the cost of profiles in this case will be slightly higher.

VEKA

Where is the best place to order plastic windows? User reviews are advised, first of all, to pay attention to these profiles, which are produced by a Moscow company, which is one of the largest in all of Russia. In addition, today this manufacturer has opened a huge number of branches in many other cities. The main office of the company is located in Germany. This explains the high quality and excellent performance of window profiles.

Among other things, all products are certified according to European standards adopted in 2008. You can also note this manufacturer, pointing to the award in the form of a German quality mark, which means that this raw material undergoes strict control and meets all the necessary requirements.

It will tell you where it is better to order plastic windows in Moscow, the rating of companies. It is worth pointing out the advantages of the products of this company. Among them, stable quality and a large product line can be noted. Of the minuses, consumers singled out only the increased cost. For example, one standard profile for a window with a thickness of 70 mm will cost at least 9.5 thousand rubles. In addition, in their reviews, almost all customers noted the highest quality and good performance of the products.

In Moscow, these windows can be purchased at st. Road, house 10. Or you can go to the official website veka.ru and order delivery.

REHAU

We continue to study the list of companies that helps to figure out where it is better to order plastic windows in Moscow. Another German company, REHAU, receives positive feedback. These products also have a fairly high price category. However, this is a company that has been manufacturing window profiles in the Russian Federation since 2002.

Factories are open in many cities of Russia, including the capital. REHAU plants use exclusively modern equipment. All finished products meet quality requirements and are accompanied by the necessary certification from international experts. Among the main advantages of this manufacturer are quality, a long warranty and a huge selection of models. Do not know where to order plastic windows in the company "Rehau" will be useful in this matter. Almost all customers have identified a fairly high cost of products. However, users also noted that these products are worth the investment.

Where is it better to order plastic windows in Moscow? You can buy these profiles in almost every district of the capital. For the convenience of users, a map of Moscow is presented on the company's website, on which all REHAU stores are marked.

SALAMANDER

This is another German company, but it is considered a kind of "middling". The manufacturer received this status due to the average level of sales in Russia. However, it is worth saying right away that this is due to the crazy cost that the seller breaks. A standard profile with a thickness of 76 mm will cost about 26 thousand rubles. Therefore, it is not surprising that the level of sales in Russia is rather low.

However, this does not indicate the quality of the product. When deciding where it is better to order plastic windows, you should not discount this company. Quite the opposite: this product meets all the requirements and commands respect. In addition, many users have noticed the excellent design of the products. The manufacturer not only provides all the necessary certificates, but also provides control of dealers by a company from Germany.

The central office of the manufacturer is located on Pervomaiskaya street, house 4. Here you can order products and see product examples.

What to look for when installing plastic windows

This is also an equally important issue. The fact is that it is not enough just to decide where it is better to order plastic windows, you must also take into account the features of the installation. If an outright hack is involved in the installation, then even the best design will begin to fall apart after a while. Therefore, it is recommended to trust such work only to proven specialists. Before installing windows, you should talk to your neighbors and find out exactly where they ordered this or that product and who installed it. Otherwise, there is a risk of getting high-quality profiles, which in a few years will begin to creak, deform or function very poorly.

You need to understand that, by and large, the profile is the simplest plastic construction, which, although very important for window blocks, still, when choosing it, you need to pay attention to fittings. It will depend on her how long the window will last, how well it will open and close. It is also worth paying attention to the double-glazed window itself, which must be manufactured in accordance with technological requirements and other recommendations.

Classic wooden window frames can be classified as materials whose departure from the market is inevitable. They are replaced by more reliable, durable and functional metal-plastic profile systems. Moreover, if in the case of other structures, natural building materials can still compete due to their environmental friendliness and the provision of a natural microclimate, then in the case of windows, this factor does not save wood. The fact is that manufacturers today produce environmentally friendly and harmless plastic windows.

Customer reviews of the companies presented below will help you understand other qualities of window profiles of different brands, which will allow you to make the best choice when buying in the future.

The range of PVC windows in Russia

To begin with, it is worth figuring out what options for windows are presented on the domestic market. Actually, the lineup as a whole is diverse, but all offers can be divided into three main categories. The first group should include products from foreign manufacturers, which are supplied from abroad. Further, foreign models can be noted, which are produced by Russian manufacturers of plastic windows. In this regard, the Moscow region is the main platform for issuing eurowindows. In Nakhabino, Golitsino, Orekhovo-Zuyevo and other cities, Veka, Rehau, KBE, which can be attributed to the leaders of the segment, organized their production facilities.

Reviews about Veka

It is worth starting a review of reviews related to German manufacturers with Veka. The profiles of this company are produced in Russian cities, among which Novosibirsk and Khabarovsk can be noted. Among the advantages, consumers note a large selection of profile modifications, which makes it possible to glaze loggias, balconies and living rooms with different requirements for heat and sound insulation. In particular, the company offers designs with a different number of cameras (up to 6), which increases the performance that plastic windows are endowed with.

Customer reviews of firms of German origin are usually positive in terms of reliability, but negative in terms of cost. Veka can be called an exception, because while maintaining a consistently high quality, the manufacturer strives to keep prices within certain limits, attracting more and more new customers.

Reviews about the company Rehau

If you limit the criteria for determining the best window manufacturer only by sales volumes, then Rehau will undoubtedly take the lead. This company has been operating in Russia since 2002, manufacturing its products in the city of Gzhel. During this time, the domestic consumer managed not only to be fascinated by the rather aggressive advertising of the brand, but also to be convinced of the integrity of the manufacturers. In the perception of the average user, Rehau plastic windows are the standard of quality, functionality and reliability. Indeed, the manufacturer not only strives to maintain the high level of product performance set many years ago, but also introduces unique technological ideas. Many of the developments in the design and fittings that are now used everywhere in PVC windows were once introduced by Rehau.

Among the disadvantages noted by customers, it is worth noting only the high cost - however, the characteristics of German window systems fully justify these investments.

Reviews about KBE

If Rehau can claim the status of a leader in terms of sales, then the manufacturer KBE is one of the oldest brands that represent German PVC windows in Russia. Users note the build quality, impeccable thermal insulation and reliability of fittings, which are supplied with KBE structures. Voskresensk and Khabarovsk are the main sites for the manufacture of windows of this brand in our country. At the same time, it is important to take into account that the profiles produced in Germany absolutely correspond to Russian counterparts. This similarity has been repeatedly confirmed by trials and tests - including those from the Rosstroy organization.

Consumers value such windows primarily for performance. In particular, KBE endows its products with high sealing, frost resistance, and also introduces a unique gray seal into the structures, which, according to the owners, not only fulfills its direct function, but also visually expands the space of the room.

Reviews about Salamander

This brand is not one of the leaders in sales of PVC windows, but its quality is not inferior to leading brands. It can be said that Salamander is an underestimated brand under which quite solid and affordable systems come out. Salamander plastic windows are praised by consumers for using quality plastics as well as near-perfect surfaces.

In addition, you can see the weld at the junction, which is not only almost invisible, but also inside provides a reliable connection of structural elements. Also, the manufacturer does not save on fittings, using first-class components and accessories. These elements lay the foundation for the window structure, extending its operational life.

Reviews about LG Chem

The South Korean manufacturer of window systems LG Chem is little known to the domestic consumer, however, small factories use the standards of such companies in order to reduce the cost of production. For example, LG Chem technologies are used by manufacturers of plastic windows in Nizhny Novgorod, offering designs that are quite acceptable in terms of quality. The owners of such windows positively characterize their design, noting the rounded glazing beads and the original external bevels of the frames. LG windows do not lose much to German giants in terms of thermal insulation. According to consumers, several factors contribute to high rates at once.

First of all, this is, of course, a multi-chamber system, including up to 5 compartments. Further, it must be said that LG Chem is one of the few manufacturers that has its own unique developments for the manufacture of an extruder. Therefore, despite the general budget of windows of this brand, the plastic used in them has very decent performance characteristics for thermal insulation.

Reviews about Funke

Funke can be put on a par with the largest European window manufacturers, although even some budget brands bypass it in popularity. One way or another, many people love the company for a number of special characteristics. Chief among them is the use of fittings from the company "Siegenia". It is thanks to her that users note the reliability of the mechanisms of the window structure, as well as its ergonomics.

At the same time, plastic window manufacturer Funke regularly introduces new technologies. One of the latest projects was the production of drainage from rigid PVC. At the same time, experts plan to use elements with coconut palm fibers as an additional filter.

Reviews about the company Proplex

Under the Proplex brand, Russian-made window systems come out, however, they are based on Austrian developments. The owners of such structures note that they are able to compete with the best German profiles in terms of thermal insulation. For example, Proplex plastic windows maintain a favorable microclimate at a temperature of -30 ºC. Otherwise, you should not make special requirements for products, since this is still a brand close to the budget class. Nevertheless, such systems will provide average sound insulation and stable operation of fittings. Again, if we proceed from a comparison of price and quality, then this option may be the best of all models of the domestic spectrum.

Brusbox Reviews

The Bryansk manufacturer Brusbox produces window systems that were originally designed for Russian climatic conditions. Despite the modest potential of the technological and production base, the company manages to offer customers a wide range of products. Unfortunately, the owners of such windows do not express the best opinions about the quality. Among the shortcomings, yellowing of frames and deformation are noted - these are processes that many plastic windows undergo over time. Customer reviews of Russian firms often highlight such shortcomings, but the popularity of these products does not subside from this, since the low price smooths them out.