How to make a small pond. Pond in the country with their own hands. How to make a pond with your own hands

(19 ratings, average: 4,39 out of 5)

An artificial pond in the country can be a great place to relax on a hot summer day. Those people who have country houses on the banks of a lake or river are very lucky. Well, the rest will need to roll up their sleeves and equip the pond in the country with their own hands.

We draw up a project

It is best to take a place for a future artificial reservoir still at the stage of designing a suburban area. In this case, the reservoir must:

• do not fall under prolonged exposure to direct sunlight - heated water provokes the growth of algae and the development of microorganisms. The water in the reservoir quickly becomes cloudy and will have a musty unpleasant odor;
• be in an open area - branches and foliage from trees will quickly pollute the water, and the root system can damage the bottom of an artificial reservoir;
• be located so that later it would be possible to expand the size of the water surface, if you want to remake the pond, for example, into a full-fledged complex - with a fountain, a bridge, etc.

Professional builders it is advised to make the artificial pond shallow - as it will be mainly used as a beautiful element of the surrounding landscape in the garden. In addition, you immediately need to think about how you will take care of the reservoir on the site - there should be a convenient approach to it. Naturally, not through the alpine slides or the garden.

The water in the artificial pond will need to be changed by hand, as it will not be cleaned naturally, unlike natural reservoirs. Therefore, you need to make sure that the well with water in the country is located near your pond.

The choice of material for construction

Before you make a pond with your own hands, you need determine its basis. In this case, there are several solutions. Let's consider what an artificial reservoir can be made of.

Reinforced concrete

The most durable pond in the garden can be made using reinforced concrete. The bottom and coastal zone, reinforced with reinforcement and filled with concrete, will be able to withstand various additional loads - the installation of sculptural compositions, a fountain, etc.

The labor intensity of construction makes this technology of organizing small ponds in the country inappropriate. The disadvantages of this solution include a significant cost. Need to rent equipment, use a lot of building materials, and it will be possible to dismantle the installed reservoir only with great labor costs.

PVC film

A budget solution for the construction of an artificial reservoir in the country. The depth and shape of this reservoir can be easily changed, reduced or increased in size. A pond on a plot with a film base can even be made seasonal - for example, fall asleep with the advent of winter and equip it again in the summer.

The disadvantages of this solution include the fragility and fragility of the PVC coating - the film can be easily damaged, and if the integrity of the bowl is violated, the water will easily go into the ground. Therefore, swimming in these home reservoirs is not recommended - they made small in size and used for garden decoration.

Store-bought artificial bowls

This is the golden mean for people who want to have their own pond in their garden and not have to worry about building materials for organizing it. Shop bowls for decorative reservoirs are made of durable and strong materials - fiberglass or polyvinyl chloride.

The first option is much more expensive. However, the cost of a fiberglass bowl is fully compensated by the excellent performance of this material. This bowl can be easily placed with your own hands, without involving outside help in this process. The disadvantage can be considered the acquisition of ready-made standard forms - that is, the pit must be made to fit the shape of the bowl, and not vice versa.

Moreover, the possibility of building uneven terrain bottom to design natural coastlines. In addition, this method of organizing a pond in the garden will cost much more than a pond made from improvised materials or film.

improvised materials

A rather interesting option is the use of different improvised containers or materials. Old troughs, cast-iron baths are quite suitable for construction.

The advantages of this method is that it is not necessary to build bulky reinforced concrete structures or acquire standard forms. The disadvantages include the low decorativeness of old containers - you will need to show imagination so that from the old bath make a work of art.

For example, for people who have catastrophically little space in the country, experts advise using a convenient and simple tire pond. Old tires are dug in, a film is laid inside, and the banks are decorated.

The resulting pond can surprise even professional designers - the finished pond will be an exclusive element of the landscape interior.

foundation pit

Then, when they decided on the material for construction, it is necessary to dig a foundation pit. This work is best done in the summer, when groundwater leave as much as possible. The depth of the pit is determined based on the type of material from which they decided to make the bowl. If this is an old bathroom or other finished form, we dig a hole 25-30 cm deeper than the dimensions of the form.

If you decide to make a pond out of PVC film, then you will need to dig to a depth of about 70-90 cm - a shallow pond will completely freeze in winter, dry quickly and heat up in summer. For reservoirs made of reinforced concrete, it will be necessary to dig a pit with a depth of more than 1.5 meters - here one cannot do without special equipment.

Consider the stages of work for the construction of a pond in the country with your own hands for various types of selected materials.

PVC film pond

When the pit is ready, it remains to clean its bottom and dig on the sides of the future mini-pond small terraces. The depth of these terraces is approximately 30 cm, and the width is about 25 cm. The bottom of the pit is compacted, pebbles, rubble, stones and other foreign objects are removed. The cleaned bottom is sprinkled with sand and covered with a geotextile. This preparation of the bottom will significantly improve the strength of the base coat as well as extend the life of the film.

The next step is the laying of the film coating. The size of the film can be calculated as follows: take the total length of the reservoir and add twice the depth of the pit. The film sheet is fixed on the terraces with a margin of approximately 30 cm. The laid sheet is laid with stones or bricks - this must be done to maintain its laying shape.

Then you need to fill the pond with water, check the integrity of the film and proceed to the design of the coastal zone. Don't need it right away cut off the remaining film under bricks, as it can shrink over time.

Pond from the bath

To build a pond from an old bathtub or other unnecessary container, you will need:

• crushed stone;
• a piece of chain-link mesh;
• sand and cement;
• coil of steel or aluminum wire;
• beautiful stones for decoration.

After the pit is dug, it is necessary to make its edges. Why around the entire perimeter of the future pond we remove the top a layer of earth about 45-50 cm wide. This perimeter is deepened so that it is level with the shape of the reservoir. The drain hole in the bathroom is closed, then it is installed at the bottom of the pit.

To extend the life of the future mini-pond, it is necessary to protect the enamel on the inner surface of the bowl. Why the sides and bottom of the bathroom can be treated with tile adhesive. After that, the bath is allowed to dry thoroughly. As a rule, this takes at least a few days.

Then, a chain-link mesh is laid around the entire perimeter of the bowl. It is required to reinforce the bottom and sides of the reservoir. We apply a cement-sand mixture or concrete mortar to the grid and let it dry. Then comes the turn of the final design of the coast.

Pond from the finished form

A pit dug for a mold cleared of debris, branches and other items. The walls and bottom of the pit are rammed. When the country house is very loose soil - it needs to be strengthened. For the finished form, a perfectly flat plane of the sides and bottom of the pit is required. The surface can be leveled using the building level.

Then the bottom must be covered with sifted sand, which also needs to be compacted. The sandy layer is an excellent fuse that will ensure the integrity of the finished bowl.

After that, the bowl is installed in the pit and water is poured. The resulting voids between the ground and the sides of the form are covered with sand, this must be done gradually. First, 20-25 cm of sand is poured, which is wetted with water. After spreading the sand, this process needs repeat until the voids are completely filled between the walls of the pit and the mold.

This must be done without fail, since the pond mold is very fragile and easily deformed. Uniform pressure on the surfaces of the bowl will not allow it to warp.

A day later, the gap between the ground and the sides of the bowl is checked. If there are voids, add sand. We pour water from the mini-pond, finally clean it and pour clean water.

Plant selection

Small plants are planted on the shore of the pond. A picturesque picture on the shore of the pond can be created by hostas, with green ones prefer partial shade, and blue ones prefer shade.

Also, sedge grows well in the shade with narrow leaves, which sometimes grow up to 80 cm. In partial shade, the unpretentious loosestrife with attractive purple inflorescences. Lightning can be planted in a sunny area.

A fern will perfectly decorate the shore of a reservoir located in partial shade. It grows well in moist soil. The same conditions apply to astilba. For planting near the pond, its undersized varieties are suitable.

If the reservoir is quite large, plant a darmer (peltiphyllum) on the shore - a perennial plant in the form of bushes up to 1 m high and up to 0.5 m in diameter with notched round leaves.

At the second level, water lilies are traditionally placed in the reservoir. Hybrid nymphs are characterized by a variety of flower colors. There is no need to overload the pond with a large number of specimens, they grow and only interfere with each other.

Sunshine is great place for air. In a small reservoir, a low calamus grass looks organically, and in a large one - marsh. Some varieties of irises also prefer low water.

The hardy calla is a fairly popular home pond plant. At the beginning of summer, a cob-shaped flower appears on it, and after - red berries. It must be remembered that they are poisonous.

Water hawthorn, smelling of vanilla, grows well in water, reaching a diameter of 50 cm. It is a deep-sea plant. It looks original floating on the surface, miniature, covering the reservoir with a green carpet of azolla. However, it will need to be fought with, periodically catching bushes.

How nice it is to sit by the pond on a fine sunny day, admire the water surface, relax, unwind. But what if there is no water nearby? Build it yourself on your site! This does not require huge financial influences. All the nuances of creating and arranging a small country pond will be discussed in our article.

Purpose

If you decided to equip the landscape of your site and decided that you must have a pond in your yard, then before you start work, you need to determine what functionality the pond will have on your site.

According to their purpose, ponds can be divided into three types:

• decorative;
• fish pond;
• for swimming (pool).

Decorative

A decorative pond can be small, built solely to decorate any area of ​​\u200b\u200bthe garden. Being a component of a landscape composition, it can be its finishing touch or an original addition to a design project.

Such a pond is created for an aesthetic purpose: it is pleasant to admire it while sitting in the garden.

Ornamental ponds can be larger: the pond itself is deeper, the compositions are larger, where bridges, fountains, streams, and lighting can serve as decor. In addition to a pleasant sight, such ponds are also a place to relax: on a warm summer day, you can sit around the pond in sun loungers and get your dose of ultraviolet radiation.

For fish breeding

Who among us does not dream of watching the fish frolicking in our own pond and pleasing the eyes of the household? In addition to the decorative function, such a pond will also serve as an antidepressant: fish swimming in the pond are an excellent sedative and relaxing remedy.

Such a pond should be large enough for your fish to feel comfortable. It can be absolutely any form. But whoever you decide to breed - crucian carp or ducks - do not forget about the need to filter the water, as well as to enrich it with oxygen.

For swimming

A homemade swimming pond is a lifesaver on a hot summer day! The size of such a pool will depend on your wishes and on the possibilities of your site. If the size of the plot allows, then you can build a beautiful reservoir in your yard in which you will swim in the summer. You can also get by with a smaller pool, which will be no less pleasant just to plunge into to cool off on a hot day.

Style of artificial reservoir

Conventionally, ponds can be divided into two large main groups, each of which has many varieties:

• regular pond;
• landscape pond.

A regular pond is created using a ready-made form. Surely you have thought out a landscape project in advance, so you already have a good idea of ​​\u200b\u200bwhat a home reservoir should look like. Based on the wishes for the design of the pond, you can choose a suitable finished shape: they are not only regular geometric, but also more complex types: broken, asymmetric, and so on.

A landscape pond differs from a regular one in that a ready-made form is not used in its construction. Therefore, any configuration can be given to it.

The size and appearance of the reservoir can also be different: you can build a small Japanese-style pond, the main advantage of which is simplicity, or you can give free rein to your imagination, not being limited to the standard round shape and create a large pond filled with various decorations.

How to make a pond with your own hands?

Let's assume that you have decided on the type and functionality of the pond. Now let's look at how to practically implement the conceived idea.

Where to begin?

Of course, you should start by determining the location and size of the future pond. The choice of location is very important. Still, a pond, even if it is functional, should please the eye of the owner, complement the landscape composition, fit perfectly into it, or even become an accent in your design project.

When choosing a place for a pond in the country, you should take into account not only and not so much its visual advantages, but a number of other factors that affect the choice of location:

• Plot size. It goes without saying that the size of the pond will be whatever the size of your garden will allow it to be.
• Site relief. Different terrain allows you to achieve different results: on a flat surface you can create a wonderful laconic pond, the water in which will please the eye with its smooth surface; uneven surface allows you to fantasize with fountains and waterfalls.

• Groundwater level and soil. You must consider these factors when determining the depth of the pond (you may need certain consumables and additional forces).
• Lighting. It is preferable to find a pond in the shade: exposure to direct sunlight for a long time will increase the evaporation of water, and the microorganisms living in the water will become active, and the pond will lose all its attractiveness. To prevent this from happening, when choosing a place, pay attention to the light regime. This is especially true for small ponds and ponds with fish.
• Environment. Of course, the trees and shrubs surrounding the pond look very attractive, but do not forget that the foliage falling from these plants will pollute the pond, and the close proximity of tree roots can spoil the waterproofing.

• Power supply. Particular attention should be paid to the location if the pond is planned to be decorated with fountains or lighting in order to think over the electrification of this part of the summer cottage in advance.
• The prospect of expansion. You should always take this point into account, perhaps in the future you want to increase the pond itself or expand the recreation area near the reservoir, you want to fix or redo something.

To do this, be sure to leave a piece of empty space in the garden on one side of the pond.

• Consistency with other buildings: after all, a pond is part of the overall composition, so it is necessary to take into account the general appearance of the summer cottage, thinking through the design of the reservoir.
• And finally, the visual component. Of course, the pond should be pleasing to the eye, so its location must be arranged so that it can be seen from most places in the garden.

The size of the pond, of course, depends on the size of the site, but not only on this. The size of the reservoir also depends on your design project, in the end, just on your desire.

So, let's look at the main parameters:

• Dimensions. There are no specific recommendations regarding the area of ​​the pond. Some sources have information that the reservoir should be located on a plot up to approximately 10% of the entire garden area, but these are not fixed standards.
• Length and width. These parameters are taken into account based on the total size of the site. If you dig a hole for a pond with your own hands, then they also depend on your physical capabilities.
• Depth. Depends on the dimensions of the reservoir, its potential functionality, soil and your physical strength (again, if you dig the pit yourself).

• Zoning. Experts distinguish three parts:

1. coastal(100-300 mm): it contains plants growing in shallow water, and there is an entrance to the reservoir.
2. Shallow(300-900 mm): There is room for other deeper plants.
3. deep sea(from a meter and further): the area necessary for the habitat of fish. The larger and more diverse the living world of the reservoir, the greater part of the area is given to the deep-water zone. Also keep in mind: in order for the fish in the pond not to freeze in winter, the lower part of the pond should be located below the freezing level of the ground.

• Content. At Surprisingly, it is easier to take care of a large body of water than a small one.

What will be needed?

When you have decided on the location and size of the future reservoir, it is time to purchase materials. Now on the market of building and finishing materials you can buy everything you need to equip a pond:

• One of the most costly options concrete pond. This reservoir will serve you for a long time, but consider the functionality of the future pond: if you are going to build a pool, then this option may be the best choice for you, but if not, study the other options offered and choose the most suitable one for you.

• plastic containers- an easier option. They come in different compositions (polyvinyl chloride or fiberglass), so their service life is also different: an average of 10 to 30 years. The work on installing the bowl is simple, so this option is quite convenient: you need to dig a hole, set the shape, fill the voids with sand. However, there are also disadvantages in this option: plastic molds are quite expensive, they also need especially careful transportation, they are not resistant to ultraviolet radiation, but they are resistant to frost.

The best choice in this case is a fiberglass mold with a rubber base.

The strongest and most reliable film is butyl rubber: it will last up to 50 years, it is also frost-resistant and very durable.

• You will also need the following materials and tools: a shovel, a hose for irrigation, a cord (for marking), stakes, a wheelbarrow for removing land, a cleaning filter (especially relevant for reservoirs where fish are bred), a pump (it creates the pressure necessary to fill in water, it will also be needed for construction of fountains and for the operation of cleaning filters), a sterilizer (needed to purify water), a compressor (aerator) (necessary for reservoirs in which fish live, as it saturates the water with oxygen).

Plan and calculations

So, you have thought about what your future pond will look like, found a suitable place for it, decided on the size, materials, but you still don’t know exactly how many materials you will need to build your dream pond. To find out, we will make calculations and, based on the size of the pond, calculate the optimal amount of materials needed for its construction.

Suppose we decide to use polyvinyl chloride film (PVC) as a basis, since this material is affordable, strong enough and easy to use, and also subject to repair.

PVC film comes in different colors: black, brown, blue (or cream):

• a black film will cover the bottom and allow you to observe the reflection of the sky on the surface of the reservoir;
• the brown film resembles the real bottom in color, which will make the reservoir more realistic;
• a light film (blue or cream) will allow you to see its inhabitants under water, for example, fish.

When buying a film, you should take into account the composition (PVC is stronger than, for example, polyethylene film) and thickness (we need a film whose thickness is more than half a millimeter).

It is also worth paying attention to the manufacturer, strength, UV resistance and the absence of toxic substances.

1. The length of the film is equal to the length of the reservoir + 2 depths of the reservoir + 400-500 mm, just in case.
2. The width of the film is equal to the width of the reservoir + 2 depths of the reservoir + 400-500 mm, just in case.

It is necessary to glue the film with glue bought in the same place, in a hardware store, for example, "Tangit" or adhesive tape.

After you understand the film, you have to make a sketch of your pond. First, draw a mini-sketch on paper, and then directly on the ground, indicating the depth and width of the tank, as well as the depth and width of the steps. You can write with a garden hose or sand - it's convenient.

Making: step by step guide

After all the preparatory stages have been successfully completed, you can proceed to the main actions:

1. We remove the top layer of soil.
2. We dig a hole.
3. We remove the earth.

It all sounds quite simple, but be careful, do not forget to take into account all the recesses necessary in the future (for plants, for steps, etc.), as well as the features of your reservoir (waterfall, pond, pool). When installing a pool, a large pit will have to be dug with an excavator, as in full-scale construction.

When the job is done, the foundation pit was dug, and the walls were well rammed, you can proceed to waterproofing. If you do not pay close attention to it, then water will begin to flow into the soil, and we do not need it at all. If you do it right, everything will turn out the way it should.

There are three ways to form a substrate on the bottom of your pond:

• The easiest and cheapest way is to fill the bottom with sand and stones. But the result of this method is short-lived: a few years and such a substrate will cease to function properly.
• Another way is to cover the bottom with geotextiles. The result, of course, is more durable, but the cost of this method is higher.
• This method is the most reliable: cover the bottom with PVC film. It is not very energy consuming, and the result is the most durable.

Let's take a closer look at the third option, as its result will allow us to enjoy the pond in our garden for many years. The main thing is to follow the instructions.

The fact that we have chosen the film method of waterproofing does not at all forbid us to fill the bottom with sand before laying the film: in this way we will protect the film from unnecessary damage by stones or roots. When laying, unfortunately, it will not work out completely without folds, but it is better to make one large fold than many small ones: it can then be pressed with stones or glued. The main thing is not to stretch the film, otherwise it will break under the weight of water.

To fix it, you need to dig an additional track, lay a film, fix it with rods and sprinkle stones on the track, and then lay the hole itself with them. When you have mastered the film, you should pour water into your hole. Do it carefully, without sudden pressure. You should act carefully: the film, although durable, can still deteriorate and tear from incorrect actions. After 1-2 days after filling with water, you can cut the film.

Now it is necessary to strengthen the shore so that the reservoir looks beautiful and neat. Let's pay attention to the soil: if it is black soil or clay, then vertical walls can be made, but if it is sand, then the walls should be inclined. It is believed that the ideal slope of the pond bank is 45°. With such a slope, the coast does not crumble, and during the freezing period, the ice does not stick out. Do not forget about the plants: since the planting depth of all plants is different, it is necessary to provide shelves for planting in advance.

It is possible to strengthen gentle banks with a geogrid or geomat, and steep banks with gabions, piles and retaining walls. By the way, there is an option for those who are not yet ready for such large-scale work on their site, but still want to be the owner of a small island of happiness in their garden. A pond can be built from very improvised means. For example, from a tire.

The pit will be needed much less deep, the film will need much less, and in the end there will be the same amount of joy. The creation process is extremely simple: you need to dig a hole according to the size of the tire, insert it into this recess, lay a film on the bottom, pour water, decorate the outside with stones.

Of course, the pond will be very small, but if it is properly decorated, it will please the eye no worse than a full-fledged reservoir.

What plants to plant?

Of course, in order for your pond to look impressive and attractive, it needs to be decorated accordingly: decorate with plants. In order for your pond to be closest in resemblance to a natural reservoir, you need to do landscaping.

We offer several options:

• You can plant plants at the bottom of your pond. It is better to use local plants: they will take root faster.

• You can also plant various plants in some kind of container., for example, in a barrel and put around the pond. At the same time, you can plant whatever your heart desires, choosing containers to your liking and, in accordance with the style of the pond and garden composition as a whole: it will look impressive, while not visually separating from the overall picture. In addition, just by replacing the container, you can easily change the appearance of the entire environment, if you suddenly get bored with the previous look.

• The highlight of your design project can be a decoration in the middle of the pond. Place a beautiful stone in the middle of the pond, and place a pot with some interesting plant on it, or decorate it with some figure, for example, a mermaid. Such a move will certainly attract the attention of others.

• To keep the water in your pond clean for as long as possible, you need to protect it from leaves, branches and insects falling from trees with a special mesh design.
• If, nevertheless, the leaves are in the water, a net will help you: just remove unnecessary debris from the water so that it stays clean for as long as possible, and the pond delights you with its beauty. But the net will not help get rid of debris from the bottom of the reservoir. Therefore, it is sometimes necessary to clean the pond with a water purifier.

In the future, this miracle will delight you and all your guests, who will be completely delighted.

How to choose the best location for a pond

You need to decide on the choice of a place that is suitable for the purpose you have noticed. When choosing a site, you need to pay attention to lighting. The area should be well lit, but not under the scorching sun, and not in permanent shade. Since many plants can be adversely affected by such growth conditions, and they will lose their natural appearance.

The sun is the main enemy for the plants in your pond. Some plants can cause the water to “bloom”, and will cause you great inconvenience with constant cleaning. Since do-it-yourself ponds are not very deep, fish and plants will not be very comfortable in the heat. Also think about your resting place near the pond, in extreme heat, you yourself will not really rest there.

The best location will be if the sun warms the pond in the morning and evening, as the temperature is acceptable, and in the daytime, the shadow from the house or fence will cover it. It should also be taken into account that it should be located away from trees, which can damage the material from which the pond is made of roots.

Materials needed for manufacturing

The pond can be made from the following materials:

1. PVC coating;
2. Butyl rubber film;
3. Ready-made tanks for the pond. (reinforced concrete, or plastic)

That polyethylene is not suitable for the manufacture of a pond, so its service life is only 1-2 years.

A polyvinyl chloride coating will serve you for about 15 years, and a butyl rubber film for almost 50 years, although its cost will be much more expensive. Also, some gardeners use reinforced concrete bowls, but most still prefer plastic containers. They are a product, the size of which you can choose for your site. This bowl is durable, but still you need to be careful so that no cracks appear on it, they have great frost resistance, so it’s not scary to install them even with our climate.

Preparatory stage

We will prepare the place, remove all unnecessary. If we use a film, then we draw an arbitrary shape of the pond, if you have a bowl, then with the help of a shovel we draw a contour. And we begin to drip, this is the most difficult stage of work. If you have a bowl, then you need to drip 5 cm deeper than its height. When using foil, you yourself think about the preference for the depth of your pond.

When the pond is dug out, you need to pour sand on the bottom, and tamp it well, the sand will serve as drainage for the pond. We install the bowl in place, trying to make sure that there are no voids, as they can later lead to cracks in the bowl. After installation, cover the bowl with a film, and lay the stone in cut. They can be natural or artificial, it all depends on your imagination.

When buying a film, you need to pay attention to its color, as there is a very large range of colors on the market.

Let's proceed to the most inspiring stage of work, this is decorating the pond with various plants. Many gardeners use water lilies, this is the most popular plant for such ponds. They are planted on a special fabric that holds the root system well at the bottom. You can also decorate with a small fountain, which looks very beautiful, and its murmur will help you and your family relax.

You can also run fish into your mini pond, carp, carps and many other varieties take root well. If you still let the inhabitants in, taking care of their accommodation, you need to install a filter so that your pond does not clog and your fish are comfortable.

How to make a pond with minimum investment

Many gardeners make ponds from old tubs or cisterns, which will be a lot cheaper since you don't have to spend money on bowls, which are not cheap. Your bath will look no worse than a pond equipped with a bowl, although it loses in size.

We dig a ditch, 20 cm deeper than the bath, and install the bath, fill it with sand on the sides. After that, we lay the film, and with the help of tile glue we lay stones that will give naturalness to your mini pond. The stones should not be laid around the perimeter of the bath, but slightly increased along the edges in order to visually enlarge the pond.

Pour clay at the bottom of our pond, and mix the mortar there, and use it to cover the cement mortar between the stones, which will give your pond a more natural look. When the clay dries, and this will happen after 2 hours, you can pour water, in a thin stream, and start decorating it.

Car tire pond

The tire from which a very beautiful pond will turn out should be from a tractor or a dump truck. With the help of a grinder, we cut off the upper part of the tire.

• We dig a hole so that the tire fits freely into it. We lay fine sand at the bottom of the pond to drain our future pond. You can also protect your future pond from tree roots, and by protecting it with a roadbed.
• We lay the waterproofing, in the form of a film, which should extend 50 cm beyond the edges of the future pond.

• Once again, we smooth the film well, and fill it with a rein, sprinkle sand along the edges of the pond, and lay the decor in the form of stones that will hold the film and prevent it from slipping.
• If the cover is used from Belaz, it can be used for swimming, and made in the form of a small pool. Then decorate the area around the pond, it stands in the form of small pebbles, which in the future will be nice to step on.
• If you use it as a decoration for your site, then you can decorate it with a variety of plants, large stones along the edges.

• Also in the center, with the help of a small pump, it is possible to make a fountain.

As you can see, if you really want to, it is possible to make a pond with your own hands on the site, from various materials suitable for you.

Do-it-yourself pond in the country

A small homemade pond can radically transform the landscape of any yard. It is recommended to plant new plants in and around the pond to make the site more comfortable and unusual.

Rest with the whole family on the shore of the pond will be a pleasant event for everyone. You can build such a pond on your own without outside help.

There are several main types of reservoirs designed for different purposes. Some perform a purely decorative function, and serve as a place for planting aquatic plants. In others, fish are often bred, and there are those where you can swim all summer.

Therefore, before starting work on the construction of a pond, its main purpose should be determined.

The choice of the construction site of the reservoir

An ideal construction site is a well-lit area, located at some distance from the house or other premises.

Many plants that grow on water love the sun, so an artificial pond should not be in the shade of trees. It is better to choose an open area in the yard or garden.

When choosing a construction site, it should be borne in mind that the proximity of bushes and deciduous trees nearby can cause difficult care for the reservoir.

Leaves, twigs, and other debris can quickly pollute the water, causing the death of pond aquatic plants. But coniferous trees perfectly complement the picture.

If the neighborhood with deciduous trees cannot be avoided, then it is necessary to cover the reservoir for the autumn-winter period with a net and plastic wrap.

The dimensions of the pond play an important role, because plants and living organisms in the water need a special biobalance.

To maintain the level of biobalance, you just need to observe the proportions between the area of ​​the reservoir and its depth. If the area is large and the depth is insufficient, the water will bloom quickly. In a deep, but small reservoir, plants and fish will also be inconvenient to develop. The minimum area of ​​the pond should be at least three to four square meters. The level of occurrence of groundwater determines the depth of the reservoir.

Film pond

On sale there is a special film made of polyvinyl chloride, polyethylene and other materials with similar properties.

The service life of a special film is about ten years. Polyethylene for reservoirs is sold in rolls with a width of 2 to 10 meters. This size avoids gluing individual elements to achieve the desired width. The film itself comes in different thicknesses. The deeper the artificial reservoir, the thicker the film. Classic polyethylene in rolls is not suitable for such tasks.

The size is calculated by the formula: film length = 2 pond lengths and stock.

The width is calculated in the same way. For the stock, leave about 60 cm.

The most favorable time for arranging an artificial reservoir is spring-summer, when the temperature is above +20. Before direct installation, the film is left in the sun, which will make it more elastic after a couple of hours.

Naturally, a pit is needed for a pond.

For planting plants, they will need peculiar shelves along the contour of the pond with a depth of 15 cm. Before laying the film on the bottom, preparation should be made of sand 10 cm thick. Next, the film is laid, fixing it with stones, and fill the pond with water.

The stones laid along the edges of the pond look very beautiful. A special groove is made for them, and the stones themselves are fixed with concrete mortar.

Pond from a finished plastic mold

Ready-made plastic bathtubs perfectly tolerate any temperature, are distinguished by sufficient strength.

The walls of the tank are usually 3 mm, which requires careful transport of the tank. Even a small crack will be very problematic to seal. In addition to being resistant to temperature changes, plastic bathtubs look attractive.

To dig a pit, you should transfer the contours of the container to the ground in accordance with its shape.

How to make a pond in the country with your own hands step by step

To do this, the bowl is installed at the place of digging and its contour is transferred to the surface of the soil. The depth of the pit corresponds to the depth of the plastic tub + 40-50 mm per base. Leveling the reservoir horizontally is carried out using a building level and a flat board installed on the surface of the bowl.

The pit is filled with sand, which is carefully rammed. A plastic container is placed on the surface, deepened, gradually pouring earth in the right places.

Having installed the tank, it is once again checked for horizontality and only after that it is filled with water.

Decorating an artificial pond

Of course, a homemade pond is already a decoration of any site.

But next to the reservoir, you can additionally install a gazebo to relax your body and soul, looking at the surface of the water. In addition, it is possible to organize fountains in an artificial pond, working with the help of special pumps, to equip multi-colored lighting.

In general, you can turn a small pond into a colorful spectacle. It all depends on desire and imagination.

For fountains, there are special pumps: surface and underwater. A tall fountain will require an underwater pump, but for a real water attraction, you can purchase a surface model.

For a real water show, lighting is also required. All lanterns intended for installation in water bodies operate on 12 volts.

Mini spotlights can be mounted on the surface of the water or even underwater. Illumination of the pond in this way gives it a truly unusual and stunning look.

Video

Undoubtedly, everyone who owns a dacha, private plot or private property wants to have a beautiful decorative pond on their land. Now it is considered a luxury and something exotic. There is an opinion that the realization of a dream is actually costly and costly. We will try to show how, with a small financial outlay, we create a decorative pond with our own hands.

Consider a simple and inexpensive way to create a pond.

Polyethylene film is used as a water reservoir. The main advantages of this material are:

• low cost;
• prevalence (in almost every market);
• ease of storage;
• service life - 2-3 years, depending on the thickness.

We prepare materials and tools

To make a decorative pond on our website, we need:

1. contour for the contour of the pond;
2. shovels and buckets;
3. sand, ruins, demolition stone;
4. plastic sheeting (define yourself, depending on the size of the pond;
5. Faithful servant and 3 days of free time.

We are thinking about the shape and preparation of the cave for the future ornamental pond

After preparing everything you need, get started.

The first thing we do is determine the shape of the future pond. Round, oval, rectangular, curved, etc. It's all up to your imagination. After determining the shape of, for example, a curved pond, you need to attach it to the ground and drag the rope around its perimeter to see the frame of the future pond. When we finish this phase, around the perimeter of the rope in the bayonet bayonet (about 20 centimeters), we dig a ditch that transfers the section of the pond to the ground. In the future, it will be easier to dig without having to worry about the pond borders being affected.

When we finish marking, we continue the hard work - the hammer.

First, pour the entire area of ​​the pond on 1 bayonet, then on the second, third. As practice shows, a depth of 3 bayonets, 50-70 cm, is enough for a decorative garden pond.

Level the bottom so that the depth of the pond is the same everywhere.

Even with the upper edges of the pond, otherwise it will be unevenly filled.

After completing the work, it is necessary to remove all roots, stones, sharp objects from the walls and from the basement cave. If this is not done, they may cause holes in the film later.

The bottom of the pond should be filled with sand.

The layer should be 10-15 centimeters. The sand will serve as the crunch pad for the film.

We made a movie

After completing the work described above, continue to use the most thorough polyethylene foil deposited in the cave. It is important to correctly calculate the size of the film in order to compress along the edges of the recess by 30-50 centimeters.

We put it well and tried to straighten out the big wrinkles.

It is better if three small ridges have one big acronym.

The top should be tighter and more durable.

Filling with water

By laying a kind of film on the bottom of the pond and on its walls (the film must be integral), you can start pumping water. Perhaps this is the only time you can relax while working.

When filling the base pond with water 2/3, turn the edges of the film around the edge and place a rustic stone with gravel along the edge of the pond on it.

Place the stones on the edge of the pond, still fill it with water.

If you fill the pond, you can take into account that the work is completed. The area around it can be planted with flowers, ornamental shrubs, many sculptures, lamps.

How to make a pond in the country with your own hands?

Finally, you can buy a small fountain that will greatly improve the effect.

As for pond maintenance, change the water at least once a month and catch bugs, leaves, and other organic waste with it.

After a detailed review of this method of creating an ornamental pond in a garden plot, we can say with confidence that this is not a difficult and not very expensive business.

If you decide to spend a few days and a little time creating a pond, you will get a wonderful decoration on your site, moisten the air in hot weather and enjoy the view of your loved ones.

Take a look at the photo of the pond we have at the beginning of the article.

Tyatya.ru is a young cognitive site about home and family. Over time, it will become a repository of knowledge and become an everyday helper in everyday life.

Creating a pond on the site

Many people who own large areas where they can not only build a house, but also furnish other objects, will think about creating their own pond, which will add charm and attractiveness to the area, but also create original and comfortable seating.

Such a pond may be small, but at the same time it will be the pride of every person. The ideal solution is to decorate it with a variety of interesting materials, in addition, you can make a sandy beach or lie on the edges of different stones. For the pond, you can even use special aquatic flowers, which will be very beautiful and sophisticated.

The process of creating a pond in place with your own hands

First, it is necessary to determine where the water body will be, as well as what specific dimensions and characteristics they will have.

To do this, you need to focus on places that are well protected from the wind, and in hot weather, the pond should be in the shade.

As an artificial reservoir is created, it is important to supply various communication networks and install equipment. To do this, it must be possible, so the location of the pond must be chosen appropriately.

At the same time, the reservoir should be located where it will have constant access, so if you want, you can have a great rest on the shore.

There should not be too many trees near the pond, because in autumn it will not quickly get dirty and sticky leaves, which can cause the formation of various dangerous bacteria.

When deciding where to be a pond, you can start the practical work.

First, they must create a cave, which must have the necessary parameters. This work can be done using special equipment and by hand using a shovel. In this case, all walls should have a slight slope to the bottom, and all surfaces should be well covered.

All walls must be distinguished by the presence of exactly the same parameters, so this issue should be considered without delay, and also checked by level.

How to make a pond in the country with your own hands: 4 real channels and 30 ideas

In addition, the walls and bottom are covered with a waterproofing material presented in the form of a cylinder, and the material of the roof is also suitable for this purpose.

The next stage of work is the creation of a screed, for which it is necessary to form a high-quality and homogeneous mixture that has the necessary parameters.

It must contain Portland cement and crushed stone, sand and a certain amount of water. Pour the resulting mortar into the cave to be used for vertical and horizontal formwork. The thickness of the layer must be exactly the same at any point of the screed, but it must be at least 100 mm in order to obtain a high-quality and durable layer. We must not forget that in the ground they will pass pipes leading to the pond.

For this reason, the screed must have a proper opening through which the water pump and its kit will operate. The tube should lead to the nearest pond or other place where you can get water, as well as where it can be emptied.

This system also had to be equipped with special pumping equipment, and the various valves and other elements for its operation were very light.

The pipes must be laid in the ground, for which it is necessary to create ditches around the perimeter, the depth of which must be below the freezing level. It is also desirable that all elements located in the ground be wrapped with high quality and reliable thermal insulation materials that can last a long time underground.

The exhaust screed needs to be strengthened, for which high-quality reinforcing bars are used, which must be laid along and above the screed. In places where all elements are connected, they must be connected with a flexible and strong wire. The screed is cured for about a month, and during this time it must be covered with burlap and sometimes moistened so that it does not burst.

Once the concrete screed is complete, you can run the casing so you can use finishing material or not.

The ideal solution is to use marble tiles, but if there is no money for this material, plastic tiles will be strong, durable and reliable and have an attractive appearance.

The next stage is that the cave is completely filled with water with a pump and pipelines laid in the ground. We must not forget that once a year it is necessary to completely dry the pond so that the water is restored and unnecessary bacteria do not arise.

The created pond needs an interesting design and decoration, which makes it a real highlight of this territory.

To do this, you can make a bridge or a small platform and place rocks or sand around the rim. An excellent solution would be to create water beds of lilies or water lilies.

In addition, you can organize an interesting and attractive fountain in the center or use other elements for decoration. If you want to set up a fountain, you will need to spend a lot of money because it needs a reliable site as well as shipping special equipment.

In the immediate vicinity of the pond, it is advisable to create a recreation area with sun loungers and benches, so that in the hot summer you can enjoy the pleasant cooling of an artificial pond.

Therefore, the pond on the site is also quite easy to do it yourself, if you do the job properly, the rates will be consistent and competent.

I really want to relax after the summer heat and physical labor near a picturesque place. Perhaps the first thing that comes to mind is water. Unfortunately, not all land owners are lucky to have a pond in their country house. Therefore, many summer residents equip a mini pond in the country with their own hands. We will talk about this in this article.

Perhaps at first you will have questions: how to do it? what material? where to place? But believe me, you can build a pond with your own hands. Moreover, we are talking about a small pond in the country - mini copies of reservoirs from 0.5 to 1.5 m3.

Design of the future pond

Thanks to today's technologies, the owner can build a pond of any complexity. For example, there are three possible options for a small pond: wrap a hole in the ground with foil and fill it with water; use a ready-made container that may be right at hand; fill the walls of the recess in the ground with concrete and fill with water.

Option 1

To get started, create a project for the future pond on paper. Consider the width, depth, and sills for planting. Start drawing contours on the ground. This can be done with paint or sand.

If several tiers are planned in the pond, then mark them out and dig them out one by one

Purchase a film for your pond with a calculation of +0.5 m on the sides on the sides of the pit bowl. More purchases will be needed: geofabric is a material that is laid on the bottom and walls of the bowl to protect the film from damage. Although you can use something from the bins: unnecessary carpet, old linoleum.

Geofabric for reservoirs

You can fix the film with rubble, laying it in trenches dug along the edges of the thresholds. Fill the pond with water gradually, taking breaks. Lay out the shore line with stones and cover the bottom of the pond with small pebbles.

Option 2

First, decide on the shape of the container in which the water will be. Then dig a pit under it, retreating 30 cm from the sides. Tamp the bottom so that it is even. If you have chosen a multi-tiered plastic form, then pour water gradually, and fill the space between the form and the pit bowl with sand.

There are many more options for a small pond in the country. Can be used:

• Unnecessary bath. Mark the area with the dimensions of the bathroom, adding 10 cm on the sides. Dig the pit 20 cm deeper. Under the drain hole of the bathtub, make a drain with stones for draining. Pour crushed stone with sand at the bottom of the pit and tamp it down.
• Taz. We take the path of least resistance and use the most budgetary option, because even a leaky basin can be used by covering the hole with a film. Leave the edges of the basin above the ground. Under the bottom and between the walls of the basin and the pit, lay a layer of a solution of clay and sand. Fill the bottom of the basin with soil to plant the duckweed and bury it, or whatever you choose. Such a pond will be miniature and beautiful.

Bathroom pond

And more tires, a barrel, a boat or even an old cabinet! It is convenient that some of these containers can be brought into the house for the winter. Indeed, making a pond with your own hands is not difficult!

How to make a pond from the bathroom (video tutorial)

Option 3

I think many will agree that to build a pond according to the third option, some, at least basic builder skills are needed. But at the same time, do not let this scare you, because any summer resident or owner of a plot in the private sector is already a bit of a builder. And as a reward for your work, you will have an almost eternal piece of paradise in your yard.

Stages of construction of a reservoir in the country (video)

Seriously approach the choice of the location of the pond, because it will be impossible to move it. Now you can start.

If you decide to make a reservoir without thresholds, then this will greatly simplify the task. Dig a pit with slopes at 45 degrees. Tamp the hole and fill it with sand.

Lay a PET or PVC film on the bottom, without pulling it hard. Start pouring concrete from the walls, and then go to the bottom.

Try to do this part of the work in one day to avoid cracks at the joints.

Press in reinforced mesh. Pour the second layer of concrete as soon as the first one dries. Constantly check the level of the horizon. Pour in water when the concrete is completely cured.

concrete pond

Before deciding on the option of building a pond, decide which design idea will look particularly organic on your site. If the house, paths and flower beds are designed in a strict style, feel free to break a clear-cut pond. If you like everything natural, then any free form will do.

Decide on a place

How to make all the inhabitants of the pond feel comfortable? If you have a large plot of land, then carefully study the area so as not to make a mistake with the choice. There are several secrets that we will share with you.

• The roots of old trees can interfere with the work, and over time, even the walls of the reservoir. Also, falling leaves and fruits will make you clean your pond often.
• Choose a place with the expectation that the pond will be in the shade for some time so that algae and microorganisms do not develop too actively in it.
• At the same time, the sun is needed for plants along the bank. So you have to look for the best option, given these nuances.
• If your pond is small but deep, then make sure that it is always in sight when children play nearby. And why hide such beauty from the eyes?
• Best of all, the reservoir will look in the hollow. They almost always go down to the lake, river, sea.

Mini pond for a summer residence

Consider a possible ecosystem

If you want fish to live in your pond and flowers to bloom, then a few rules from this section will help you.

Plant selection

Decorative flowers in the pond do not suffer from temperature changes and can even tolerate frost (of course, except for the southern varieties of plants that will need to be hidden for the winter). But still, make sure that the water in the pond will be heated by the sun for at least five hours during the day.

The less light, the faster the mini pond in the country will turn into a small swamp. Then it will look completely unattractive, a characteristic smell and flowering will appear.

In nature, an amazing process of self-purification has been launched, and at home, the owner should take care of the cleanliness of the reservoir.

As in a natural pond, plants in a home pond are divided into the following types:

• those that grow on the shore;
• those that grow in a humid zone on the border with water;
• floating on the surface;
• shallow and those that grow at depth.

Although the air humidity will be higher on the shore along the pond than in other places, simple garden plants will be able to take root there. But still, consider that they do not look ridiculous or casual next to other inhabitants of the pond. Begonias, aquilegia, balsam and many other perennial plants that are used to decorate landscapes will harmoniously combine.

A zone with constant humidity, but without stagnant water, is the best place for moisture-loving perennials. Among such stars are meadowsweet (meadowsweet), lysichiton, darmer, iris and many others.

Irises also successfully get along in shallow water. They compete with susak, pontederia, tail

A water lily can rightfully be called a deep-sea queen. She copes well with harsh winters. Water lilies are not only beautiful, but also useful. It is they who can create the shadow necessary for the pond. Among other deep-sea beauties, the lotus (although it needs to be dug up for the winter, because in most of the territory of the former USSR the water does not warm up for almost 8 months, as it is necessary for the flowering of such varieties), water paint, oronium, water chestnut and many other bizarre inhabitants of the depths.

Rivals of deep-sea plants are algae, which saturate pond water with oxygen and support the vital activity of other organisms. Among them are the swamp, hornwort, etc.

Animal inhabitants

Insects, microorganisms and protozoa will start up in your pond on their own. You will have to take care of the fish yourself.

Fish in the pond in the country

But don't think that you can't get them. In fact, there is nothing supernatural here. Check the depth of your pond - it should be at least 90 cm deep. This is necessary for the fish, because this way they can overwinter. And in summer the water does not warm up too much. Smaller ponds are suitable only for growing ornamental plants.

By the way, in ponds with fish, a third of the surface of the water should be covered with greenery.

“I'll buy you a house…” - a line from the song literally slipped out of my mouth when a noisy group of my friends drove up to a country cottage.

"By the pond, in the suburbs ..." - three of the most cheerful of us sang in unison. The silence of the calm village street was blown up by friendly laughter.

“You shouldn’t laugh,” the owner of the estate was slightly offended. Unload, now you yourself will see both the house and the pond.

And indeed, behind the high forged gates with aristocratic monograms, a luxurious dacha was hidden. A straight path lined with paving slabs led to the two-story house. But the whole company, pissed off by the gentle autumn sun, moved, without saying a word, to the right, along the thick green lawn to the area with the barbecue. There was no such dacha building as a gazebo.

In my opinion, these buildings with a circular shop and a fungus roof can already be safely classified as relics of the past. We settled in comfortable deck chairs around the fire, over which the men were already conjuring, and did a pleasant thing - we began to carefully examine the decorative pond. Along the way, many questions arose, to which the owner of the summer cottage kindly answered.

Pond - what and why

“In general, water is my element,” a friend began a fascinating story. - You know that I can sit fishing for days with a fishing rod, I have a huge aquarium at home, where dozens of fish species coexist perfectly. So I also wanted to build a pond in the country house. Indeed, the atmosphere here is simply magical. She dreams great, but the passage of time seems to freeze. In addition, it does not take up much space.

Even on a modest plot, you can equip a small pond by sacrificing two beds of potatoes in its favor. The country artificial pond will become your favorite vacation spot. After all, the water element relaxes, helps to forget about fatigue and everyday problems. To get rid of the baggage of negative thoughts accumulated during the day, just sit for a quarter of an hour near such a miniature pond. In addition, building a pond is not such a difficult task. For those who at least once in their lives held a shovel in their hands.

Important design decision (style)

“And how did you get started?” - I was distracted from my thoughts by the question of a friend addressed to the owner of the dacha. I got ready to listen.

Before you make a pond with your own hands, you need to choose an ideological concept. So that the artificial reservoir organically fits into the overall picture, so to speak. And indeed, - I figured in my mind, - after all, on a plot of six acres, a garden pond with a fountain and exotic vegetation along the coastal border will look at least ridiculous. “We considered a lot of options, because we wanted to make this corner of the hacienda unusual,” said a friend. Any shape for the pond can be chosen.

Clear square or rectangular artificial ponds look good next to austere mansions. Especially if lawns are designed according to a similar principle in the yard and straight avenues of tiles connect, like arteries, its main parts.

If you want to create the effect of maximum closeness to nature, then you should think about how to make an artificial pond of arbitrary shape. The advantage of this variety is that at first glance it is even difficult to distinguish such a reservoir from a real lake.

Fans of eastern currents can build a pond in the country in the original style. For example, in Japanese - with huge smooth stones along the edge and undersized coniferous plants. Or with a Chinese flavor: a small wooden bridge connects the two banks, a light breeze tangles in the round crown of a tree nearby, and colorful herbs complement the landscape.

“I took the path of least resistance,” the narrator smiled, “I chose the simplest pond device.” A round reservoir is easier to build, since you can use a basic blank of the desired diameter: a concrete ring, a wooden tub, or even a truck tire. The round pond in the garden looks perfect, especially next to young fruit trees or a picturesque alpine hill.

Choosing a place for a country pond

The construction of ponds begins with a thorough study of the area. My friend was lucky, he did not suffer from reflections for a long time, since there was only one place for a reservoir - to the right of the house, in front of the orchard. And for those who are interested in the rules of choice, I will tell you about some secrets. First, avoid a site in close proximity to trees, especially mature ones.

Roots can get in the way when you dig a ditch. Leaves falling into the water are certainly picturesque, but not very useful - cleaning ponds is a rather troublesome business. The pond should remain in the shade for some part of the day. This is necessary so that algae do not develop too actively in its abyss. Under the sun, aquatic vegetation will feel great, but you will have to regularly clean the pond during the seasonal "blooms".

However, the shadow will have a bad effect on the state of the decorative "inhabitants" of the coastline. So here you need to choose the best option - as they say, the golden mean.As for the functional side of the design of the pond in the country, be guided by your own design flair. Place it where it is convenient for you: next to the house as an alternative to the pool, near the gazebo for friendly gatherings, in a quiet corner of the hacienda, if you like to be alone with yourself and just dream while enjoying the beautiful view.

Materials: three basic options

As in any construction, in the construction of a pond on the site, the choice of materials depends on the budget. And, of course, from the desired result.

Have you decided on a major construction project? Look for a concrete base, build formwork, use rebar. Expensive, troublesome, but reliable and, as the owner of the dacha said, "for centuries." The second option is to build a plastic pond from a finished one-piece container.

And the most popular type of building material is a special film that is resistant to moisture. Making a pond using this technology can be called the most acceptable, the most affordable from a financial point of view and the most convenient in terms of implementing a design idea.

Pond construction process

“At first I was scared by the amount of work,” we continue to listen to our friend. The men left the brazier and, having surrounded it with a dense ring, came to learn all the technological secrets of the homegrown builder of country ponds.

1. Making a plan.

We draw a sketch of the future reservoir. Here it is immediately worth considering the main emphasis - which element of the decor will be the key one (a tree on the shore, stones along the edge, bright perennials, or maybe a mini-fountain).

2. Sketch on the ground.

We transfer the drawing from paper to the site - we blur the earth with the pressure of water from a hose or draw contours with sand.

3. Earthworks.

The construction of a pond in the country can be started with an excavator if the volume of the future reservoir is impressive. For a small decorative pond, a depth of 80 cm will be enough, and if you plan to breed fish, then you should go deeper into the bowels of the site by at least a meter.

When the pit is completely dug, it is covered with a layer of sand and carefully compacted.

4. We line the bowl.

On top of the sand it is necessary to lay out geotextiles. As an analogue, you can use old carpets or blankets, linoleum or roofing felt.

Along the perimeter of the reservoir, it is necessary to dig a trench in order to fill the edges of the film there.

5. Filling the bowl.

Fill the bowl with water. The film will then stretch. When the pond is completely filled, fill the film into the trench. Then fix this seam with soil and subsequently decorate (rubble, natural stone, boards, etc.).

To prevent water from stagnating, you can include a stream in the device of an artificial pond or use a special submersible pump. “But this is already aerobatics,” was the summary of the story. “I will make my next pond even more perfect.”

It became clear to everyone that our hospitable comrade was not going to stop there. And rightly so, because in any business, and especially in design, there is always something to strive for.

"I'll get the pigeons ..." Well, here it is again! What is this song haunting me today? Probably, the atmosphere is conducive, because the aroma of barbecue has already begun to tickle our noses.

“And with you, and with love…” The “most musical” of our company deftly hit the guitar strings.

“We will plant lilacs under the window…” Everyone has already picked up the familiar motive.

“Thanks, guys, for the hint,” the owner of the hacienda interrupted the song. “Exactly, the dovecote should be built over there, where the garden path winds. And I will plant lilacs here, there will be a hedge.

Photo selection