Hanging holders for glasses in the kitchen: choose the best option. Fittings for a bar counter in the kitchen - varieties and features of accessories Hanging shelf for glasses with your own hands

Wooden holders, attached from the inside to the top wall of the cabinet, are a reliable and convenient device for storing fragile glasses. This simple device can be easily done with your own hands.

You will need:

3 wooden planks with a section of 2 × 1 cm, length 240 cm;

Ruler, pencil, awl, adhesive tape;

Miter box, hacksaw;

White glue, primer for wood;

Nails, hammer;

Narrow flat brush, matte white acrylic paint, medium flat brush;

Screws of medium thickness, a screwdriver, a drill and a drill of the same diameter as the screws.

Making holders for glasses with your own hands

Wood planks and screws are the basic material needed to make these handy wine glass holders.

1. Each plank must be cut into four parts. The cabinet in which we are going to install the holder has a depth of 50 cm.

The slats should be slightly shorter: 45 cm. In this case, the cabinet doors will not touch the glasses.

2. Mark the cut points on the planks with a ruler and pencil. Place the bar in the miter box, hold it with your hand and cut it. Cut out all 12 pieces in the same way.

3. The resulting planks must be connected in pairs at an angle of 90 ° to get six stops in the shape of the letter L. Glue the side of one plank with glue. Apply glue along the long side of the other plank, close to the edge. Connect the planks and hammer four nails along the connection. Connect the rest of the planks in the same way. Leave for 24 hours to dry.

4. Apply a primer to the holders with a narrow brush and allow to dry for 4 hours. Paint the holders with white acrylic paint using a medium flat brush: first apply one coat of paint and let dry for 8 hours, then apply a second coat and leave for 12 hours to dry.

5. Mark the locations for the screw holes. Insert a drill bit of the same diameter as the screws into the drill and drill holes while holding the drill vertically.

6. Measure the diameter of the bottoms of the glasses to determine the distance between the holders.

7. On the top wall of the cabinet on the inside, mark the lines along which the glasses will be attached. The distance between the rows of holders, as well as between the outer holders and the side walls should be 3 cm. To measure the distance between the holders, add 0.5 cm to the diameter of the bottoms of the glasses.

8. Place the holders strictly along the marked lines and stick with tape. Holding the holders with your hand, insert the awl into the drilled holes and pierce the holes in the wall of the cabinet.

9. Wrap the screws with a screwdriver and peel off the tape.

Functionality and at the same time stylish design in the kitchen is probably the dream of every housewife. Unfortunately, storage of kitchen utensils is one of the main problems in a room where food is usually prepared and eaten. This fully applies to various. Moreover, each type of alcohol requires special dishes. At the same time, the glass holder easily solves this problem. Yes, and give the interior a special zest.

What is a glass holder?

The device is a construction of parallel rails, for which the glasses are fixed to the wide base of the legs. This is the most convenient way to store wine glasses of all types, configurations and sizes. The holder can be installed both on the countertop and on the kitchen wall, on the shelves, as well as inside the kitchen cabinet. Very often, the holder for glasses is fixed on the bar counter, a decorative element of the kitchen that is currently relevant.

Types of glass holder

The most common version is made of metal tubes in which wine glasses are placed upside down. If you plan to fix it to the wall, you need to buy a wall-mounted glass holder. You can save space in the kitchen if you mount the structure to the bottom wall of the hanging cabinet. The holder-shelf, suspended on a railing - a steel pipe along the wall, looks stylish. By the way, in addition to one section, we can have one or more sections if it is a linear holder.

If you have a bar leg, decorate it with a functional accessory in the form of a round wine glass holder.

The glass holder on the suction cup will allow you to fix the dishes where you want to sit in a pleasant company or with your loved one at the moment, without fear of spilling an alcoholic drink.

In addition to metal holders, you can find colorful wooden products and sophisticated glass models on sale.

The glass holder embodies a structure consisting of parallel rails, for which the objects themselves are attached. This is a convenient way to store wine glasses. It is installed on the surface of the table, ledges, in the kitchen cabinet.

The glass holder embodies a structure consisting of parallel rails, for which the objects themselves are attached.

Each person creates an atmosphere of convenience and comfort in his house or in his bar. Most often this applies to the kitchen area. But this room is in a damp environment, food is constantly being cooked on it. Soot, fumes, deposits from fat have a negative effect on glassware. It is better to take care of the presence of a structure with which it hangs. The best option is a holder for wine glasses.

In order to choose the right mount, it is determined what type of rack it is attached to:

After it became clear what kind of countertop is used, you can proceed to the choice of holders. There are such varieties:

The latch must be fixed in such a way that dust and other dirt cannot get into it. Otherwise, it will not fulfill its main function - to protect glass and crystal products.

How do they attach

There are several options for how to fix the holders:

The central type can be conical, round. Mounted on a pole located in the center.
Located on the side - on the railing. It can rotate around an axis or extend to the side.
Hanging wine glass holder is fixed to the ceiling.

The bracket is used to attach the device to the wall. It can be just for one glass or take up the entire space.

The bracket is used to attach the device to the wall.

A multi-level system requires a pipe with a radius of five centimeters. The material used is brass or nickel. They are lightweight yet durable. With the help of flanges, it is attached to the ceiling, to the wall - with side fasteners. Roof rails are put on top, adjusting the height. Holders allow you to add, remove elements.

Another way is a chain. It will give the impression that the objects are just hanging in the air. Attach with a magnet. Such an illusion will attract attention, amaze with its originality. The stand is stable, it is almost impossible to overturn it.

It will give the impression that the objects are just hanging in the air.

What dishes are used and why

In kitchens where there is no bar, the railing serves as a hanging glass holder. It is selected based on the style, color of the room. There are several types:

This look looks nice and modern. Suitable for the image of high-tech, classic, pop art. Comfortable, stylish, suitable for office, living space, cafe.

Bars use traditional clamps. They are a device that has a semicircular appearance. Wine glasses and glasses are suspended from the base of the legs. Suitable for any style. Save space in the room.

Bars use traditional clamps.

Another variation is a chandelier - a latch. Spherical elements are located around the lamps at different heights. The legs of wine glasses are threaded into them.

Chandelier with glasses is suitable for large rooms. If the room is small, then the number of dishes is simply halved. The view will not be spoiled.

Apply the design for bar and home utensils. Thanks to it, the countertop does not get dirty, the wine glasses dry quickly, and space is saved.

Chandelier with glasses is suitable for large rooms.

What material is the most reliable

The device for glasses is made of metal, plastic, wood, steel. The latter is considered the most common and reliable. It is durable, has a long service life, is resistant to water and temperature extremes, does not lose color, will fit into any design and will look stylish. Almost all manufacturers work only with this element.

The steel holder is durable, has a long service life, is resistant to water and temperature extremes, does not lose color.

How to choose

Above are the types of holders. Each of them has its own advantages. Some take up a lot of space, others, on the contrary, will save it. They are made from different materials. When choosing, it is taken into account what kind of furniture is in the kitchen - bar or ordinary. Based on this, a design is selected that will fit better into the kitchen interior, give it aristocracy, originality.

It is possible to make the device yourself. To do this, you need a wooden plank, tools, wood pins. The finished product is varnished or left as is. Then negligence, charm will remain.

It is possible to make the device yourself.

Hanging bars - a device for storing glassware. Kitchen space is used rationally. They perform the function of decor, differ in such advantages:

Saves space on bar tables;
The risk that the dishes will be beaten is minimized;
Glasses are always at hand.

Holders will be a great addition to the design of the apartment or a gift.

The kitchen or bar is not only for storing dishes, they are the face of the owner of the premises. The owner of the interior shows his personality, passions. Therefore, the holders will be a great addition to the design of the apartment or a gift.

Video: How to make a desktop glass holder with your own hands

Dremel offers a versatile hanging wine cabinet for wine storage.

What you need:

- wooden slats;
- 1 wooden block;
- multifunctional tool (here Dremel 4000);
- sanding attachment (430) 6.4 mm, grit 60;
- cutting disc for wood (SC544);
- universal drill (561);
- universal cutting kit (565);
- glue gun (here Dremel (930));
- screwdriver;
- screws;
- dowels;
- self-tapping screws;
- metal chain

Step 1

To make the component parts of the shelf, cut a block of wood into several pieces. The back and front of the shelf should be 50 x 2 cm and the sides should be 25 x 2 cm. Sand the edges of the workpieces with the Dremel 4000 and the Dremel sanding head (430), 6.4mm, 60 grit.

Step 2

Take wooden slats and cut them into 12 even pieces (you will need 2 coasters for each bottle). Each blank must be at least 22 cm in length. To make these stands, use your Dremel 4000 with a wood cutting disc (SC544).

Step 3

Take the front and back of the wine rack blanks and mark on them where the slats will be placed. Place pencil marks along the entire length of the finished front of the shelf - you will need them to cut the cuts for the bottles. In order to make it more convenient to place the bottles on the shelf, cut out semicircles in which the containers should fit. Use your Dremel 4000 and the Universal Cutting Kit (565) to get the job done. Sand the edges of the semi-circles using the Dremel 4000 Multi-Tool with a 6.4 mm Dremel sanding head, 60 grit (430).

Step 4

Secure the rails at the marked points using the Dremel Glue Gun (930). To complete the work on the shelf, it remains only to fasten all its parts with screws. Make holes in the shelf components and install metal corner brackets in them. Then screw in the 25mm screws and tighten them with a screwdriver. To make the wine rack even more convenient, you can install a lattice for hanging glasses on it. To do this, you just need to screw the metal grate on the back of the shelf with a screwdriver.

Step 5

Attach self-tapping screws to the corners of the front side of the wine rack. Attach a metal chain to them - with its help you can place the shelf anywhere in the kitchen.

Step 6

Now it only remains to choose a good place to hang crafts on a chain. To secure the wine cabinet, measure the distance between the self-tapping screws. According to it, make four holes in the ceiling using the Dremel 4000 and the Universal Bit (561), then insert the dowel and screw in four additional self-tapping screws. Hang a shelf.

If you have a couple of evenings to spare, then why not start making crafts for the kitchen and home? After all, with your own hands from improvised, natural and even waste materials, you can create a bunch of useful or just beautiful little things. In this article, we presented 50 inspiring photos and 12 super ideas with step-by-step master classes for making decor items, storage accessories, kitchen utensils and more.

Idea 1. Cutting board tablet holder

Watching your favorite TV shows on a tablet or peeking into a recipe book while cooking will become easier if you make a special stand for this from ... an ordinary cutting board. Making this DIY kitchen craft will take no more than two hours, and it will be used every day.

To make a holder for a recipe book or tablet you will need:

You can either use an old cutting board or buy a new one (wooden is best, but bamboo works too). Its size should not be much larger or smaller than the tablet.
A small wooden plank, or better a molding fragment (it will hold the tablet / book).

Another block of wood or plywood from which you can cut a sharp triangle;
Paint or stain in the desired color, for example, to match countertops, fronts or kitchen apron ;
Brush for painting or rags for staining;
Jigsaw or saw;
Wood glue or any other strong adhesive.

Instruction:

Using a saw or jigsaw, shorten your plank or molding to the desired size (the width of the board), sand the edges with sandpaper, then simply glue on the bottom of the board.

Cut out a piece of wood to support the stand in the shape of an acute triangle with a right angle as in the photo below and glue it too.

The angle of inclination of the holder will depend on the inclination of the hypotenuse of the triangular bar

Paint the entire piece following the paint manufacturer's instructions and leave to dry.

If desired, the handle of the resulting stand can be decorated with a jute rope or ribbon. Thus, when the stand is not needed, you can hang it on a hook.

Also, the craft can be further decorated - for example, artificially age as in this master class, draw inscriptions, burn out the drawing, cover with slate paint. In the next selection of photos, you can get decor ideas for original cutting boards.

Idea 2. Jute coasters

If your kitchen (or, for example, a country or summer kitchen) is decorated in a rustic, mediterranean, rustic or nautical style, then you will surely love this kitchen craft idea. In just a couple of hours, you can make coasters for plates for the whole family and guests with your own hands.

To make one substrate with a diameter of 33 cm, you will need:

10 meters of jute rope 1 cm thick (sold in hardware and hardware stores);
Hot glue gun;
Scissors.

Instruction:

Just start winding the rope in a circle, alternately smearing small sections with glue and fixing them for a while. When the mat is formed, cut the end of the rope and glue it.

Idea 3. Organizer for cutlery and kitchen appliances from cans

Tin cans cost nothing, but they are durable, easy to care for, and their shape is just right for storing all kinds of spatulas, ladles, forks, spoons and other utensils. With a little effort and creativity, you can make a convenient and pretty organizer out of them, which, if it doesn’t fit into the interior of the city kitchen, will definitely take root in the country. And a do-it-yourself organizer made from cans can be used to store tools, brushes, felt-tip pens and other small things.

Stand for spoons and forks from cans

To make such a stand for spoons and forks, you will need:

4 or 6 clean and dried cans without lids and burrs;
Acrylic paint for metal or enamel paint (it will protect the cans from rust);
A few wood screws and a screwdriver;
Thick nail and hammer;
Furniture handle or leather strap with fittings;
A small wooden board.

Instruction:

Paint the jars inside and out and let them dry for one day.
If necessary, saw the wooden plank to the desired size, sand, clean and finally paint (not necessarily the same color as the cans).
Take a nail and a hammer and make a hole for a self-tapping screw in all the jars.

Tip: To facilitate this process and not damage the paint layer, place a small bar on the table with a clamp, then wrap the bar with felt and only then put a jar on the bar (see the picture in the next photo collage in the lower left corner)

Attach the jars to the plank and align them as they will be mounted later. Mark the holes on the board with a pencil.
Punch small holes in the board at the marks using a hammer and nail.

Screw a self-tapping screw into the hole in the first can to attach it to the plank. Repeat the procedure with all remaining banks.
Finally, install a furniture handle or leather strap on the end of the wooden board using the same self-tapping screws. Ready!

Here are a few other deco ideas and design modifications for cans.

Idea 4. Topiary for kitchen or home decor

Topiary is a small decorative tree that decorates a dining or coffee table, chest of drawers or mantelpiece. Also, a topiary is a great addition to a gift, especially if you decorate its crown with, say, sweets or flowers. Making such crafts with your own hands does not take much time, does not require the use of expensive materials, and even beginners can do it. Having mastered the basic principle, you will be able to create topiaries for any occasion, any shape and design. Take a look at our selection of DIY home decor photo ideas, you will surely like something!

Halloween Kitchen Decor Idea

To make crafts you will need:

Styrofoam, plastic or floral foam base in the form of a ball or other desired shape;
Trunk (a smooth branch of a tree, a pencil or any other small stick);
Decorative elements for creating a crown: coffee beans, artificial flowers, cones, colored beans, etc.;
Decor to mask the pot filler, such as moss, pebbles or sisal fiber;
Flower pot;
Filler for the pot, which will fix the trunk. For example, cement mortar is suitable, all the same polystyrene or alabaster (the best option);
Hot glue gun;
If necessary, you will need paint to decorate the trunk, base or pot. Also, the trunk can be decorated with ribbon or twine.

Basic instruction:

To begin with, it is desirable to paint the base in the color of the crown elements so that possible bald spots are not noticeable. You can also paint the trunk and pot and leave them to dry.
Cut a hole at the base of the crown for the trunk a couple of centimeters deep, fill it with glue and fix the trunk.
Take the base of the crown and start gluing decorative details one by one. The principle of operation at this stage is simple: first, large parts are glued, then medium ones, and finally, small elements fill in the bald spots. You need to glue the decor quickly, until the glue is absorbed into the base.
Dilute the stem fixing mixture in the pot according to the manufacturer's instructions and fill the pot with it, not reaching a couple of centimeters from the edge. Next, insert the barrel, hold it for a while and then leave it to dry for a day.
Mask the filling of the pot with a decorative "cover" (you can fix it a little with glue).

Idea 5. Serving board-tray

But the idea of an unusual serving board-tray, which, although not a cutting board (intended for laying out products only in dishes), can nevertheless be very functional. For example, it can be used to beautifully serve snacks for drinks (olives, pistachios, nuts, chips, etc.), sauces, honey, sour cream, jam. Thanks to the slate part, while the board is not used for its intended purpose, it can simply be hung on the wall and used for writing.

To make this DIY kitchen craft, you will need:

Wooden board 5 cm thick;
Stain of the desired color (for example, to match the countertop);
Sponge, rag or brush;
Slate paint;
Two furniture handles and wood screws for their fastening;
Jigsaw or saw;
Screwdriver or screwdriver;
Ruler, pencil.

Instruction:

Cut your board to the desired size with a hand/electric saw or jigsaw. In this master class, the board is 60 cm long, but you can make it shorter or longer.
Paint your board with stain according to the manufacturer's instructions and let dry.

It's time to paint the inside. To do this, first glue masking tape around the edges of the board to limit the painting area. Next, apply slate paint (in this case, paint in a can) and let it dry.

Screw the handles around the edges of the board.

You can replace furniture handles with leather straps, paint the board a bright color, burn a design on it, or attach two “legs” to its back.

Idea 6. Stand for mugs and glasses

If you're the type of person who collects wine corks (whether for fun or in the hope of making something useful out of them someday), then you'll love this craft idea.

To make one coaster you will need:

8 corks (respectively, for the manufacture of a set of 4 coasters, 32 corks are required);
A roll of cork board, mat, or plate coaster (for cutting out the base of the coasters);
Hot glue;
Leg-split.

Step 1. Arrange your corks in pairs in a square format, as shown in the photo below. Using hot glue, apply a bead of glue between two corks and press them together for 30 seconds. Repeat the process for all other pairs.

Step 2. From a sheet cork (board, rug), cut a square corresponding to the size of the future stand. Next, apply hot glue on it, wait 15-20 seconds. and glue your blanks.

Step 3. Fill the gaps between the plugs with glue and let it dry. For better adhesion of the glue to the corks, you can put some kind of press on the workpiece.

Step 4. Wrap the craft with twine and tie a knot.

Do-it-yourself coasters for mugs, glasses and glasses can be beautifully packaged and presented to a friend

If desired, the coasters can be made round, triangular or hexagonal, cutting off the excess with a knife.

According to the described principle, you can make such a hot stand with your own hands. By the way, in this case, an old CD will do as a basis.

Idea 7. Wall panel

Another craft idea for home and kitchen that you can make with your own hands from wine corks is a wall panel for decorating the interior and storing notes, memorable photos and postcards.

Panel of corks in a frame from Ikea

To work, you only need a beautiful frame (from a picture or a mirror), paint of the desired color, hot glue and a large pile of corks. Corks can be laid out in a herringbone pattern, checkerboard pattern, even rows, and in other ways that you like. If necessary, for example, if there are not enough traffic jams, they can be cut lengthwise or across. And to make the corks easier to cut, they need to be soaked in hot water for 10 minutes.

Other interesting ideas for making wall panels with your own hands.

Idea 8. Universal knife holder

A knife holder is a very useful tool in the kitchen that helps keep your workspace tidy and keeps your knife blades sharp longer.

Making a knife holder with your own hands is very easy - just pick up a small vase and fill it tightly with bamboo / wooden skewers, colored beans or ... colored spaghetti, as in our master class.

To make a knife stand, prepare:

A container or vase is the height of the blade of your largest knife. The shape of the container can be any, but without any bends;
Spaghetti, lots and lots of spaghetti;
Several large ziplock bags (or just large bags that can be tightly tied into a knot);
Alcohol (for example, vodka);
Liquid food coloring in your desired color (or multiple colors if you want to make a multi-color filling)
baking sheets;
Aluminum foil or an old oilcloth tablecloth;
Paper towels;
Kitchen scissors.

Instruction:

Make sure your container is clean and dry, then fill it tightly with spaghetti. When the container is full, take out the spaghetti and add a couple more bunches of pasta to this pile as a spare (in case of replenishing broken sticks).
Divide the spaghetti evenly among the bags and pour enough alcohol into them so that it can wet all the sticks. Next, add 10-40 drops of food coloring to each bag.

Seal or tie your bags, then put them in additional bags to avoid leaks. Slowly shake and turn the bags to mix the dye into the alcohol and pasta. Next, lay the bag on one side and leave for 30 minutes, then turn the bag over again and leave it for another half hour. Continue soaking the spaghetti in this way (no more than 3 hours) until it reaches the desired color.
Cover your baking sheet with aluminum foil, then a layer of paper towels (or oilcloth). It is advisable to wear gloves to protect your hands from staining. Remove the spaghetti from the bags, after draining all the liquid, lay them out on a baking sheet in a single layer and leave to dry. From time to time, spaghetti needs to be sorted out for them to dry evenly.

Once your spaghetti is COMPLETELY dry, start putting them in the container.
Shake the filled container and flatten the spaghetti. Insert your knives to determine the optimum filling density, add pasta or remove excess if necessary.
Now, using kitchen scissors or other very sharp scissors, cut the spaghetti to the desired length without removing it from the container (best done over the sink). It is important that spaghetti does not exceed the height of the container by more than 2-3 cm, otherwise they will break quickly.

Idea 9. Jars for storing spices and bulk products

Today we will talk about the express technique for making paper baskets, which can be used to store small things (keys, stationery), yarn, as well as for unusual serving of fruits, Easter eggs, bread or pastries to the festive table or as a gift.

Even a child can weave such baskets quickly and easily.

You will need:

About 15 sheets of A3 thin paper, cut in half along the sheets (this can be printer paper, a sheet of newspaper in full spread, and even baking paper);
A container of a suitable size with straight walls (for example, a jar of jam);
Glue in a stick;
One skewer;
Spray paint (optional).

Instruction:

Starting at one corner, begin to roll a sheet of paper tightly around the skewer to a diagonally opposite corner to make a long and even tube. When the straw is ready, add a few dabs of glue to the corner of the paper to fix it in place and pull out the skewer. Do the same for all remaining sheets. In this master class, it took 30 tubes to weave 2 baskets.
If necessary (for example, if you used newspaper sheets) or if desired, paint the tubes with acrylic paint.
Take an even number of tubes and connect them together as shown in the photo in the upper left corner. In this master class, it took 6 tubes for a basket the size of a jam jar, and 8 tubes for a larger basket.

Start braiding: take one of the outer tubes (which is under the grate) and pass it over the next tube, then pass it under the next tube, then pass the tube over the next tube again, and so on. Continue weaving by lifting the already wrapped tubes vertically (now we will call these tubes racks).
When 2-3 cm remain from the first working tube, increase its length. To do this, apply glue to a new tube and insert it into the remaining "tail". Continue weaving again and again, adding paper tubes as needed.
As soon as you weave the base of the desired diameter (the same size as the container), place the container on it and start weaving around it, pulling the rack tubes close to the walls.
Having finished weaving the basket to the end, take out the jar and carefully wrap the end of the working tube in weaving.
Wrap the ends of the uprights inside the weave and trim if necessary. Next, you can spray paint from a spray can, as in our master class.

Idea 11. Wall holder for towels and kitchen utensils

From an ordinary grater, you can make such a convenient and beautiful holder for towels and storing kitchen utensils or even live or artificial plants.

From a flat grater, you can make a decor for the kitchen in country style, Provence or Shabby Chic with your own hands

To make a heated towel rail and a tray for small things, you will need:

A grater (preferably an old one, but a regular new grater is also suitable, as long as it is metal);
Patina for metal (for artificial aging of the grater);
A small cutting board or just a wooden board
Wooden plate (for the bottom of the grater);
Glue.

Instruction:

Follow the manufacturer's instructions to coat the grater with a metal patina, for example, in green, as in this master class.

Install a wooden bottom in the inside. It must first be cut to the size of the top of the grater. As a rule, at the top of the grater there are protrusions from metal handles, it is on them that the bottom will be attached.
Screw the grater to the board with self-tapping screws, having previously made holes in it with a nail and a hammer.
Mount the board on the wall near the sink, hang a towel on the handle, put your spatulas, ladles or flowers inside.

Idea 12. Flower vase

Glass bottles for wine, milk or other drinks are almost ready-made vases that are just waiting to be painted with acrylics and / or trimmed.

Categories

Popular