Manufacture and installation of stretch ceilings. Own production of stretch ceilings. Departure to the object and measurement of the premises

Millions of Russians who have installed modern structures in their apartments, shops, and offices have no doubts about the impeccable appearance and reliability of stretch ceilings. Nevertheless, installers still have a lot of work to do, because the quality of our housing is known to everyone, and major and cosmetic repairs are a procedure that no one could avoid, even the owners of apartments in new buildings. Modern decoration forever frees you from the need to deal with putting the ceiling surface in order.

Who can install a stretch ceiling for you? It can be anyone - a familiar master, an installation team. You will be able to install a simple design even with your own hands - this is not as difficult as it might seem at first glance. But in any case, nothing will happen without the participation of a local or all-Russian factory of stretch ceilings.

The design of a modern stretch ceiling consists of a frame and a canvas stretched in it. The frame is made of an aluminum or plastic profile, fixed along the perimeter of the walls. The installation procedure is simple and in many ways resembles the manufacture of a frame for a suspended drywall or panel system.

With the canvas, everything is much more complicated. Most stretch ceilings are made on the basis of PVC film. As a rule, its width is one and a half meters. In recent years, Chinese-made PVC film with a width of up to five meters has appeared on the Russian market. However, its range is small due to the fact that manufacturers have not yet learned how to pigment a wide canvas with high quality. The bulk of the canvases is made by assembling using a HDTV machine from several cuts of material.

The most practical way of attaching the canvas to the frame is called harpoon. The tension of the material is achieved due to the fact that at room temperature the canvas is 7% less than the base ceiling, and before installation it is heated to a temperature of + 70C. A harpoon is welded along the edges of the canvas during manufacture, which fixes it in the grooves of the mounting baguette. The cooled film is stretched, and the surface becomes absolutely flat.

Thus, the main event is taking place at the factory of stretch ceilings - the production of a canvas ready for installation in the frame of the structure. Everything else is a matter of technique. It follows that the business of stretch ceilings can be divided into two interrelated areas - production and installation.

Who is a Stretch Ceiling Dealer?

In every Russian city you can find a company that installs stretch ceilings. As a rule, this is a dealer of a large company. There are, however, ordinary entrepreneurs who carry out orders for the installation of ceiling structures. However, it is more reliable and promising to be a dealer due to the constant technical, informational and consulting support from the enterprise. Of no small importance is the fact that cooperation is organized on a mutually beneficial basis. The dealer is always offered special prices for materials and components. His requests for the production of canvases are carried out in strict accordance with the contract. It is not at all necessary that the dealer and the company are located in the same city or region. An example is the Moscow factory of stretch ceilings, which has been developing its dealer network for more than ten years. Its dealers operate not only in Moscow and the region, but throughout Russia. Moreover, in many regional centers of neighboring countries, local entrepreneurs have signed contracts with the factory.

The essence of the work of the dealer is as follows:

  • After receiving the application, a measuring technologist is sent to the object. His duty is not only to draw up a drawing of the future stretch ceiling, but also to agree on its design, to offer the client a catalog for choosing the material of the canvas.
  • Drawing by e-mail or personally sent to production. The sheet is made there and sent to the address indicated by the dealer by a convenient means of delivery.
  • Having received the canvas, the installers arrive at the site on the day and hour agreed with the customer and install the structure. It all ends with the signing of the Act of execution of works. After that, the dealer automatically assumes obligations for warranty service of the stretch ceiling.

As you can see, there is nothing particularly difficult. The dealer needs an office where the constant presence of at least one manager is sufficient. The assembly team consists of two people. The number of teams depends on the number of orders. The measurer can be either a separate staff unit, or a part-time installer. The team turns out to be small, but the business, with the right organization, develops successfully.

Stretch ceiling factory

Own production of stretch ceilings is a serious business. If a dealer needs only 30,000 rubles for a complete assembly of one assembly team, then in order to start production at the factory, serious investments are needed.

  • First of all, we need production facilities for the workshop, warehouses, office.
  • In the workshop, the main tool is a two-station HDTV machine. It is on it that the fabric is made and the harpoon edging is welded. You can buy an imported or domestic machine, new or used. On average, it costs about 350,000 rubles. The machine must be equipped with an air compressor, and this is about 15,000 more. Approximately the same amount will be spent on the purchase and connection of a power cable, automation.
  • In the workshop, in warehouses and in the office, furniture, shelves, racks, packing tables, office equipment and a thousand other little things are needed.
  • To start your own production of stretch ceilings, you need at least the necessary minimum of a vinyl sheet of various textures and colors, fabric material, plastic and aluminum profiles, a harpoon, and inserts. Naturally, you can not do without packaging material. The minimum set for the first time will cost at least 100,000 rubles.
  • The factory produces canvases not only for dealers, but also for their own needs. Therefore, the state must have installers staffed to fulfill orders. A set of tools for one team costs 30,000 rubles.

At first glance, it might seem that creating your own

Making an apartment with a stretch ceiling has become commonplace. The film has firmly entered life and does not cause negative reviews and concerns about harm to health. At the same time, canvases are produced by many countries, but more trust and preference are still given to materials from Germany.

Siling stretch ceilings

Stretch ceilings - a simple and quick way to beautiful, high-quality repair of the ceiling space of the room. Today, a large number of domestic and foreign manufacturers are represented on the Russian market, manufacturing stretch ceilings of varying complexity. Vip Sealing has been operating in this field of activity for over 15 years, during which time it has managed to establish itself as a reliable and respected quality partner that produces durable products.

Production and installation of stretch ceilings

Any repair in an apartment, country house or office begins with the planning of interior design and the choice of materials for the rough and finish of the premises. Regardless of the purpose of the room, the installation of stretch ceilings will be a good option, the implementation of which will not require significant time and financial costs.

Stretch ceiling manufacturers

Stretch ceilings are among the finishing materials of the latest generation, they not only harmoniously fit into any interior design, but often become its central object and the pride of the owners. The production of stretch ceilings is carried out in different countries of the world, which is explained by the ever-increasing demand for such products.

Stretch ceilings from the manufacturer cheap

Installing stretch ceilings in apartments, private houses and premises for various purposes allows you to achieve an original, cozy and elegant interior with minimal financial and time costs. You can buy stretch ceilings from the manufacturer inexpensively and order their installation in our company.

Stretch ceiling factory

As you know, stretch ceilings according to the material of manufacture can be divided into two types

  • PVC film ceilings
  • fabric stretch ceilings.

Each of these types has its own advantages and disadvantages, respectively, and the technology of their production and installation is different.

One of the important questions when choosing a stretch ceiling will be the question of the manufacturer, whose products you decide to prefer to the others. Today, the film for stretch ceilings, mainly made in China, is presented on the Russian market.

Stretch ceilings Extenzo

Extenzo stretch ceilings are produced in France and are available only in PVC membrane version. A wide color palette, many textures, a long warranty and a 30-year history of Extenzo make them the most popular manufacturers of stretch ceilings in Europe.

Belgian stretch ceilings

If you need high quality canvases, order stretch ceilings made in Belgium from us. You will receive European quality at an affordable price. Our ceilings are 23% cheaper than those of competitors - after all, we supply canvases from Europe without intermediaries.

Italian classic by Cerutti

Cerutti fabric stretch ceilings are a good choice for those people who want high-quality and beautiful ceilings, they will please the eye for many years.

Cerutti fabric stretch ceilings are made in Italy and are one of the most popular all over the world.

German stretch ceilings

The German stretch ceilings differ in quality and durability. Due to the variety of colors and textures, it is easy to choose a canvas for any interior.

The most popular German manufacturers are Pongs and Renolit. Their products are characterized by exceptional durability, a wide range of colors and harmlessness.

Seamless stretch ceilings Clipso

To achieve a perfectly flat ceiling surface without joints that spoil the appearance of the interior, Clipso seamless stretch ceilings are suitable.

French Clipso fabrics are high-strength knitted knit fabrics. Due to the fact that the width of the paintings varies from 2.1 to 5.1 m (there are no restrictions on the length), you can avoid seams during installation, and joints with a large area will be almost invisible.

Which ceilings are better: Chinese or German

Both Chinese and German products are durable, wide-format, rich in colors. To understand which stretch ceilings (China or Germany) you need, you should carefully study their characteristics.

Large stretch ceiling companies

Stretch ceilings are very popular, but not cheap compared to the usual way of finishing ceilings, so it is very important to install only better ceilings that can last for many years. The company "MSK-Ceilings - stretch ceilings" uses only materials that are produced by large stretch ceiling companies.

The best stretch ceilings in Moscow

Stretch ceilings are a type of ceiling covering that is becoming more and more popular every year. The best stretch ceilings in Moscow are provided by MSK-Ceilings - Stretch Ceilings. The best stretch ceiling companies use only quality materials. We will install the best stretch ceilings for you (you can see photo examples of our work on our website).

Stretch ceilings Extenzo

The company "MSK-Ceilings - stretch ceilings" is engaged in the installation of various types of stretch ceilings: fabric, PVC ceilings, as well as multi-level ceiling structures. We use products only from well-known companies, in whose quality we are absolutely confident. One such company is the French company Extenzo. Extenzo stretch ceilings are characterized by high strength and durability.

Stretch ceilings

The company "MSK-Ceilings - stretch ceilings" installs stretch ceilings, as well as multi-level structures. We do not produce stretch ceilings, but use the products of various companies. Fran studio stretch ceilings are now very popular, reviews about these ceilings are only positive. We also use Franc stretch ceilings - reviews on the company's website also indicate the high quality of products. Franc stretch ceilings are a budget solution.

Stretch ceilings wholesale from the manufacturer

The MSK-Ceilings company has been selling and installing stretch ceilings in bulk from the manufacturer for many years. During this time, we have checked a huge number of canvases and now we work only with the highest quality and trusted manufacturers, ordering canvases from them in large quantities. And thanks to large volumes, we can sell and install stretch ceilings at much lower prices than many other companies.

Stretch ceiling manufacturer: Russia

In many ways, the quality of the canvas depends on who is the manufacturer of stretch ceilings. Russia has recently been very actively developing this type of production and its canvases are popular. The main advantage of the canvas produced in Russia is the price. And the main disadvantage is the width (they produce a film only 1.4 meters wide). But, such a small width allows you to make a film of uniform thickness and color.

Stretch ceilings fabric Descor

Fabric stretch ceiling Descor is presented in 6 basic colors, they can be printed with photo printing of any image. When dyeing the fabric, only natural dyes are used, the maximum width of the fabric is 5 meters.

Descor and Monlange seamless stretch ceilings

Stretch ceilings are beautiful, modern and reliable. But they also have their drawbacks. For many, this is the need for welds, with a large room width. But now there is a way out - seamless stretch ceilings. The maximum width is up to 5 meters, that is, they are suitable even for large rooms. Sagging - no more than 1%, which is not noticeable to the eye. The high quality of the canvas is guaranteed by the German brand descor and the Belgian monlange.

What brand of stretch ceilings is better?

If a decision has already been made to install stretch ceilings, then, naturally, questions arise: which company manufactures stretch ceilings better, and which company to order a stretch ceiling from. And there are many companies involved in stretch ceilings. Even if you try to divide manufacturing firms on a geographical basis, it will be easiest to divide them into European and Eastern. European-made fabrics are considered to be of the highest quality, but they have a smaller selection of colors and the price is much higher. Domestic canvases are a little inferior to them, more and more conquering the market of budget ceilings.

Stretch ceilings France or Germany

The birthplace of stretch ceilings is France, and it still remains a quality model for all stretch ceilings. And we are glad that we can offer you such a service as the installation of real French ceilings.

German stretch ceilings

The use of stretch ceilings provides certain advantages over other finishing options. This is one of the main reasons for the high popularity of this type of finish today. By installing our ceiling, you get not only an excellent appearance, but also a consistently high quality product, especially when it comes to German stretch ceilings.

Russian stretch ceilings

Stretch ceilings on the territory of the Russian Federation are becoming more and more popular and are moving from the elite category to the section of simply high-quality and affordable type of ceiling repair. This was facilitated by Russian manufacturers of stretch ceilings and installers like ours, who monitor both the quality of their work and the quality of the materials offered.

The best material for stretch ceilings

It is difficult to imagine modern interior design without stretch ceilings. This is a practical and profitable option for finishing the ceiling in any room. With many advantages, these ceilings have won their fans among all segments of the population and among all designers. At the same time, they all cannot decide - what is the best material for stretch ceilings - PVC or fabric? Let's determine what advantages each of them has, and what canvas manufacturers eat.

Stretch ceilings Calypso

Numerous options and flexibility of technology, combined with simplicity - that's what makes modern stretch ceilings so attractive. The variety of interior forms of such ceilings is sometimes amazing, and the possibility of combining a stretch fabric with plasterboard forms and complex lighting systems opens up almost limitless possibilities for decorating a room.

Types of fabric stretch ceilings

Stretch ceilings are divided into many different categories, one of the classifications is the division according to the type of stretch fabric into fabric and PVC types of fabrics. Fabric sheets differ in the material from which they are made - this is a polyester fabric with moisture-resistant impregnation, and in that they do not need to be heated before installation.

The manufacture of a stretch ceiling was invented in the days of Ancient Greece. There, silk fabrics stretched over special wooden frames were used to decorate the ceiling of the houses of wealthy people. Modern stretch ceilings were invented in the last century, but gained special popularity only after 30 years.

In the photo, samples of stretch fabrics

Variety of stretch fabrics

From the beginning of the appearance of modern stretch fabrics, they were inaccessible to average citizens, since the price was very high. But thanks to the improvement of the production process and the increase in its scale, it was possible to make the cost of stretch panels more acceptable. And here this type of ceiling covering could be appreciated by the middle strata of the population. And not only appreciate it, but also love it very much, because no other type of ceiling covering can compete with durability, practicality and a variety of colors and textures of stretch panels.

The manufacture of a stretch ceiling can be made from two types of materials. In this regard, there are such types of stretch panels:

  • fabric stretch ceilings;
  • film pvc ceilings.

Tension sheets are supplied in rolls.

Production of a stretch ceiling from PVC film: technology

It is important to understand that the manufacture of a stretch ceiling and the production process of PVC film are two completely different technological processes. Polyvinyl chloride film is produced at chemical-technological enterprises. A few years ago, the main film manufacturers were only in Western Europe, but not so long ago they appeared in China and Russia. However, the cloths of European manufacturers are still considered the best because of their high quality.

If we talk about the process of manufacturing stretch ceilings, then in order to understand it, you need to know the main stages of installing the panel, namely:

  1. In the installation room, at the required height, a profile for attaching the panel (baguette) is mounted to the wall. The profile is attached around the entire perimeter of the room.
  2. Next, you need to deploy the prepared canvas with a harpoon welded around its perimeter. A harpoon is a special thickening that is welded to the cut film in the factory. It is needed to securely fix the canvas in a baguette.
  3. For the ideal tension of the panel, it is necessary that the surface area of ​​the film is 10% smaller than the area of ​​the room.
  4. In order for the cloth to become elastic and stretch easily, it must be heated to 60 degrees using a heat gas gun.
  5. Now the canvas is fixed in the groove of the baguette with a spatula. After cooling, it stretches and melts perfectly even.

Production of a stretch ceiling

As you can see, in order for the ceiling to be well stretched and smooth, you need to accurately cut the panel. To do this, you need to take a pvc film made at the factory, which is available in rolls of various widths.

Important to know: European-made PVC film is supplied in rolls with a width of 1.5-2.2 m, therefore, for its installation in large rooms, it is necessary to weld individual parts of the sheet. Such ceilings are called sutural.

In this regard, the manufacture of a stretch ceiling made of PVC film is reduced to the precise cutting of parts of the panels and their welding. This requires the following equipment:

  • spacious room with an area of ​​about 100 sq.m. and more;
  • special cutting table;
  • machine for making a weld.

Stand for rolls with pvc film

Cutting of a cloth is made according to the measurements of the room which are carried out on a place by experts. When the width of the room exceeds the width of the panel, high-frequency current welding is performed on the machine.

The most important thing in the work is the high quality and strength of the weld. Moreover, such requirements are imposed not only on the seam, but also on the welded harpoon. The reliability and durability of the entire stretch ceiling depends on this. By the way, the quality of work depends not only on the skills of the master, but also on the equipment. On an outdated cheap machine, the weld will not only be noticeable, but not durable.

Equipment for the manufacture of stretch ceilings

Fabric ceiling production

As for fabric cloths (), the manufacture of a stretch ceiling from this material is carried out directly at the installation site. This is possible because the width of a roll of fabric sheets is 3.5-5.5 meters, therefore, for most rooms, seamless installation is possible and a welded seam on machines is not required. In addition, fabric sheets are fixed in the baguette not with a harpoon, but with a wedge connection. In this way, the need for welding the harpoon at the factory is also eliminated.

The process of preparing a fabric web for installation is reduced to cutting it according to the size of the room. Moreover, when installing fabric stretch ceilings, a heat gun is not used, and therefore, the canvas does not stretch as much as PVC film. In this regard, when cutting the panel, you should not reduce its area by 10% of the size of the room, on the contrary, you need to make a small allowance around the perimeter of the panel for ease of wedge fastening. Excess fabric is cut in place after installation.

Stretch ceiling printer

Equipment for the manufacture of stretch fabrics

If you want to open your own business for the manufacture of stretch ceilings, then you will need to purchase the equipment necessary for this, namely:

  • HDTV machine;
  • compressor;
  • cutting table;
  • serving table;
  • packing table;
  • racks for storage of film rolls.

The HDTV machine for making welds on the canvas and welding the harpoon costs about 300-350 thousand rubles. The compressor will cost you 15 thousand rubles. In addition, it is worth buying various electrical appliances: cables, machines and much more. It will take you about 11-12 thousand rubles for such details. Thus, for all equipment with tables and racks, you will have to pay about 55-85 thousand rubles.

Panel cutting

Tip: do not forget to include in your business plan the cost of renting space for a workshop for the manufacture of stretch ceilings. In addition, small consumables may be needed, namely chipboard sheets, substrates, corners, etc.

Profitability of production of stretch ceilings

When all the necessary equipment has been purchased and the production room is ready for opening, you can start manufacturing the stretch ceiling. However, do not forget to stock up on consumables. You need to buy:

  • plastic baguette;
  • film cloth;
  • harpoon;
  • tool;
  • decorative masking tapes;
  • packaging materials (bubble wrap, boxes, adhesive tape).

It will take you about 100 thousand rubles to purchase the first batch of consumables.

Production and packaging of stretch ceiling

To understand how much you need to purchase consumables, you can use the ready-made formula. So, for the manufacture of 1000 sq.m. stretch ceiling you need to buy:

  • 1000 p.m. baguette for 22 rubles. per meter (made in Russia);
  • 1000 p.m. inserts for 10 rubles. per meter (domestic producers);
  • 700 p.m. harpoon for 10 rubles. per meter (Russia).

It is better to take a PVC film made in Europe, for example, a PVC sheet (Germany) costs 60 rubles per 1 square meter. So much will have to be paid for a colored ceiling, the white color of the canvas will be a little cheaper. There is also a slight difference, take a glossy or matte ceiling. Premium decorative ceilings are the most expensive. .

Although there are forecasts that over time, domestic-made canvases will be forced out of the European counterparts from the market. Judge for yourself, for the manufacture of 1 square. m. of a stretch ceiling made of domestic materials will have to pay 400 rubles, and the same ceiling made of European materials costs 500-900 rubles.

HDTV machine

Tip: if you plan not only to sell ceilings, but also to install them, then you need to hire about 6 workers to create 3 teams of two people. Approximately 15-20 thousand rubles will go to the salary of employees. per month for each.

All your investments will pay off within the first 6 months of work, provided that you establish sales and keep the brand on top. As you can see, the manufacture of a stretch ceiling is a highly profitable promising business in our country.

On the video we have proposed, you can see how a stretch ceiling is made.

Studio NP ® is currently one of the leading companies that manufactures and installs certified stretch ceilings of European quality in Moscow and the Moscow region. For more than 12 years we have been working in the market of stretch ceilings and we can provide our customers with ceilings of any shape and texture.

Our production is equipped with the latest equipment from the world's leading manufacturers for the manufacture of stretch ceilings. To improve the quality of our stretch ceilings, as well as to improve the production process, we are constantly introducing innovative technologies and design solutions. As a result, our product range is also expanding.

All materials and components used by us in the production of stretch ceilings have a certificate of conformity and a sanitary and epidemiological conclusion, which allows us to install stretch ceilings both in residential premises and in public places.

Stretch ceiling production process

The process of production of stretch ceilings "Studio NP ®" includes the following works:

  • departure to the object and measurement of the premises;
  • development of a design project for the future ceiling;
  • production of stretch ceilings;
  • installation of ceilings on site.

Departure to the object and measurement of the premises

In order to get an accurate calculation of the cost of installing stretch ceilings, it is necessary to measure the premises. Measurement is made at any time convenient for you absolutely FREE OF CHARGE. After the measurement, you will receive a full estimate and drawing. If everything suits you, you can sign the contract on the spot, and the very next day we will start installing stretch ceilings in your room.

Stretch ceiling design development

For those who wish to bring their ideas to life, we offer professional services of a designer. It won't cost you a dime! The company "Studio NP ®", as a manufacturer of stretch ceilings, offers you the development of stretch ceilings for free.

Production of stretch ceilings

The production of stretch ceilings and the production of PVC film (as well as a fabric base impregnated with polyurethane) are two different technological processes. Do not confuse the production of stretch ceilings with the production of PVC sheets. Film manufacturers do not install ceilings. They are only suppliers of components for manufacturers of tensile structures.

The company "Studio NP ®" produces stretch ceilings from the most popular materials - matte and glossy PVC sheets. We have a large selection of shades of all colors of the rainbow. As an option, we offer you to apply images to the film using photo printing, as well as create extraordinary solutions using LED structures (for example, “starry sky”).

Installation of ceilings on site

Due to the presence of our own production, we offer prices for stretch ceilings below market prices by an average of 23%. Therefore, ordering the installation of stretch ceilings from us, you can decently save.

Installation of stretch ceilings is possible immediately after the measurement of the room. Installation of stretch ceilings is carried out without dirt and dust. When installing stretch ceilings, glazing or harpoon fastening systems are used.

Confidence in the quality of the work performed, allows you to give a guarantee for a period of 10 years. All warranty obligations and working conditions are specified in the contract.

Advantages of stretch ceilings

Among advantages of stretch ceilings before other types of ceiling finishes, it can be noted:

  • Durability. The minimum warranty period for stretch ceilings is 10 years. At this time, you can forget about cosmetic repairs.
  • Moisture resistant. Stretch ceilings are moisture resistant, thanks to which you can not be afraid if the neighbors from above flood you. Under the weight of water, the canvas is deformed, but after draining the water, the ceiling will dry out and take on its original appearance.
  • The installation of stretch ceilings is very fast and does not require any global preparation, washing off the whitewash, leveling the ceilings or other “dirty” finishing work, etc. In just a couple of hours of work, the ceilings in your home will be transformed.
  • Stretch ceilings are versatile and can complement any, even the most extravagant interior thanks to a wide selection of colors and textures.
  • The hygiene of stretch ceilings is ensured by the fact that they are made of antistatic material, on which dust practically does not settle. If necessary, the ceilings can be washed with a soft cloth using detergent.

The list of services provided by Studio NP ® also includes printing on any surface of stretch ceilings (art ceilings) or applying full-color images to PVC film. Today we provide a full range of services from production to installation of stretch ceilings.

Our company provides services for the production, installation and maintenance of ceiling systems. The manufacture of stretch ceilings is a fairly high-tech process. That is why our specialists were trained at leading factories in Europe.

The production of both canvases and components for their installation is put on stream, which allows us to achieve the required quality and compliance with technologies. We use materials that meet European standards and have the appropriate certificates.

Our firm brings to your attention not only monophonic cloths, but also a possibility of drawing any drawing. For this we use special solvent inks. They are odorless, durable and do not fade when exposed to sunlight.

Production with a pattern is carried out by photo printing or UV printing. Both methods are environmentally friendly. All consumables have certificates of quality and safety.



By purchasing stretch ceilings from the manufacturer, you get not only a guarantee of quality, but also a durable product. We are responsible for all products and value the opinion of each client. Modern technologies and equipment allow us to satisfy even the most complex requests, creating canvases at prices from 300 rubles per linear meter. The close location of production facilities to the client allows us to reduce the lead time of orders to 1 day.

By contacting our company, you will receive a free consultation on the types of canvases and the possibilities of drawing. Also, a measurer will come to you at the optimal time for you, absolutely free of charge. The canvas will be produced in accordance with the dimensions and colors you need. We will also provide a full range of installation services, including the installation of fixtures for both simple and multi-level ceiling systems.

Fitting © 2022 Design and interior of apartments