Do-it-yourself cultivator for loosening the soil. Garden tools for loosening the soil: photos, reviews. Do-it-yourself equipment for loosening the soil. Criteria for choosing a cultivator

Owners of land plots know firsthand the labor-intensive process of cultivating the land. The use of a shovel, hoe, rake, of course, facilitates the work, but is not very suitable for processing large areas, and requires no small physical effort.

But progress does not stand still - they came up with to facilitate human labor. For female gardeners, this is a useful find.

This technique is used in vegetable gardens, and on plots, in vineyards and orchards. One machine can replace many fixtures and takes up little space.

The options for using a hand cultivator are as follows:

cultivates land before planting or sowing;
loosens the soil for oxygen saturation;
copes with splitting large clods of earth;
pulls out weeds;
helps in the care of flower beds;
used for weeding the site;
envelops the earth.

In the article we will talk about what cultivators are, what they are intended for and how to make them with your own hands. We will also analyze several specific home-made hand cultivators.

Possibilities of manual cultivators

For hard to reach areas or where a more careful approach is required, a hand rotary cultivator is well suited. It is brought to work by human effort.

Due to the "hedgehogs" it copes with the churning and loosening of the soil. It also turns the soil layers, which contributes to the fight against weeds.

There are also star cultivators that remove roots. They are usually easy to use, replace a shovel, and make digging much easier.

The manual cultivator is intended for:

soil loosening;
digging for further planting;
removal of weed crops with roots;
processing areas under trees, bushes;
soil enrichment with oxygen.

Mini-cultivators are well suited for small areas, they do not take up much space, they are easy to move due to their low weight. Suitable for loosening the soil under trees, bushes and in hard-to-reach places. Land work is facilitated due to the correct distribution of the load on the muscles and the location of the person during work.

Varieties of cultivators

This technique is available in different models:

disk
paw
rotary
milling.

Almost all cultivators work according to the same principle: the mechanical part is started, which sets the device loosening the soil into motion.

Its classification depends on the purpose of the equipment: the difference in size, engine power, functioning, and the extent of work. Given these criteria, they are:

lungs
moderate
heavy.

For relatively small areas with soft soil, light equipment is suitable, usually flower beds, greenhouses. Medium weight equipment is designed for clay soil. Heavy equipment is universal, it is suitable for all types of soil.

Cultivators differ in the way they function:

manual cultivators;
with electric drive;
on gasoline.

We will focus on hand-held cultivators, which you can make yourself to save money.

A number of advantages of manual designs:

They are economical, do not require refueling.
Replace several devices: a shovel, a hoe, a rake.
They take up little space.
Help to distribute the load on all muscles.

Manufacturing technology

From a pitchfork of the "Tornado" type

It has the simplest design, somewhat reminiscent of a corkscrew. Consists of a vertical stand and a horizontal handle. Such a cultivator can be safely performed independently from ordinary pitchforks.

This will require a plastic nozzle, which is usually used for pitchforks, shovels, in the form of a handle. We slightly modify the nozzle so that the handle looks like a horizontal pipe. As it, take a part of a plastic pipe measuring 0.5 m.

Note: in order for everything to fit together, the diameter of the pipe must be slightly larger than the diameter of the nozzle.

An incision is made along the pipe so that when everted, it fits on the handle.
For reliable coupling and further practical use, fix everything with electrical tape.
It remains only to give the pitchfork torsion in the form of a corkscrew. To do this, the teeth are bent with a hammer in the right direction.

Bicycle based

In order to make a homemade cultivator from improvised means, you will need an old frame from a bicycle and one wheel.

Assembly method:

A cultivator head is attached to the frame, which is either ready-made spare parts from an old device, or made independently from steel twigs. A small plow is suitable for the frame. And for ease of control, the handle is made of steel pipe.
The crossbar is created from a pipe with a diameter of 2-3 cm.
The whole structure is fixed with bolts, nothing should hang out.
For convenience, the wheel is taken in medium size, securing it with locknuts.
This type of cultivator is designed for weeding the earth between the beds.

Disc rotary

This type is designed for breaking up hard pieces and leveling the soil. The main working element is disks in the form of a sphere. The whole difficulty lies in their manufacture.

The order of work is as follows:

Spherical plates 4 mm thick are made of metal. The bowls are knocked out with a hammer in the center of the plate itself.
Discs are welded to the bushings, replacing them on the axle.
The edge of the axle is fixed with special cotter pins in brackets.
The ledge is made in a bracket, which is larger in size, a pipe and a handle are passed through it.
In a smaller bracket, a rod with a diameter of 25 mm and a length of 26 cm is made. A rod 15 mm thick is also screwed in here.
The convex corners of the cultivator are fixed with wing nuts.
Due to the rotation of the convex corners, the large bracket bends, the rod rises, and the angle of the elements changes.

Chainsaw cultivator

It is made on the basis of a chainsaw engine. It's good if you have all the components, if not, you need to buy more.
You will need materials:

metal corner;
fuel tank;
a tube;
rubberized wheels;
star for the intermediate shaft (41 teeth);
moped star.

First you need to weld a cube frame using metal corners for a walk-behind tractor. The frame size is 32 by 32 cm, the engine is mounted on the transverse corners from above, and the fuel tank is installed on the brackets from below. Then, an intermediate shaft is attached to the corner vertically standing racks. For the running shaft, the bearings are attached to the longitudinal corners. From all this comes a walk-behind tractor supported on the surface of the wheel.

For handles, pipes with a diameter of approximately 30 mm are used. Good wheels will come out of rubber. Here a star for an intermediate shaft with 41 teeth and a main star (a moped one will do) come in handy. It remains only to assemble all the parts into one mechanism, and you will get a garden cultivator from a chainsaw (by the way, you can read how to choose a chainsaw).

This can be done even without blueprints. In addition, the cultivator is not very demanding on materials for refueling, unlike purchased models.

Cultivators greatly facilitate land work, help to qualitatively cultivate the land before planting, fight weeds and are simply indispensable for large areas. And if there is no money to buy these expensive machines, then it is quite possible to make it yourself.

How to make a hand cultivator from a bicycle tells this in detail video:

Evgeny Sedov

When hands grow from the right place, life is more fun :)

Content

Cultivation is a method of processing the land layer without turning it over. Such superficial work of leveling, preparing for sowing, hilling potatoes, clearing weeds, harvesting can be facilitated by the use of hand cultivators. They will become indispensable helpers in small areas, in hard-to-reach places, when working in small greenhouses. If it is necessary to cultivate plots with an area of more than 3 acres, it makes sense to think about purchasing or creating a motor cultivator powered by electric or gasoline traction.

Types of manual cultivators

The variety of devices for cultivating the land is determined by the types of agricultural work that must be carried out from early spring to autumn. Some types of manual cultivators are used all year round to care for indoor plants or greenhouse plantations. According to the type of movement, they are divided into moving and point. The moving ones include all types of rotary openers, hillers, scarifiers, harrows. Point devices are tornado root removers, potato diggers, houseplant cultivators.

Rotary hand cultivator

The principle of operation of a rotary cultivator is based on the rotation of 4-5 end stars or cutters, the ends of which are bent and sharpened. They are driven either by an external mechanical drive or by manual pressure. Rotating cutters cut the roots of weeds, pull them out, and crush the top layer of the earth. At the same time, the surface is loosened. Such a device without a mechanical drive can only be used on improved lands. If processing of virgin soil is required, it is necessary to purchase an electric or gasoline motor cultivator.

Ripper

To improve irrigation, quickly remove weeds and fertilize on a personal summer cottage or garden plot, you need to buy a manual cultivator. It consists of 3-4 hooks bent to the bottom, which can be mounted on a long handle for processing the site or be fixed on a short handle for loosening the ground of indoor plants. It is possible to fix the ripper, as one of the interchangeable devices, on the frame of a wheeled manual cultivator or with a mechanical drive.

Root remover

To get rid of weeds, it is necessary to remove the root of the plant from the ground. A manual plant remover along with the roots will help to solve this problem. It consists of three sharp rods welded to the base, the ends of which are bent in one direction for screwing into the earth crust. The base is welded to a tubular element with an elongated cross handle. Such a device is called "Tornado" and works as follows:

position the tool so that the weed is in the center between the tips of the rods;
holding the ends of the handle, screw the root remover into the ground clockwise to the depth of the weed roots;
pull out the plant along with the roots;
shake off the ground along with the weed.

potato digger

Traditionally, villagers use pitchforks to dig up potatoes. A slight improvement in their design will turn them into an easy-to-use manual potato cultivator for people of any age. This requires a small transformation:

the forks are not located vertically, but are bent at an angle of 30-50 degrees to the ground;
a vertical pointed pin is welded to the tuleyka;
instead of a handle, a metal pipe with a horizontal handle is inserted into the tuleyka;
digging potatoes is done by sticking the tool into the ground near the bush, turning around the axis until the fork penetrates under the bush and tilting the handle until the tubers are removed.

For indoor plants

Manual garden cultivators are used for indoor plants, include a cultivator and a shovel. With the help of a ripper, the top layer of the earth is loosened, it becomes more accessible for the penetration of moisture, oxygen, and fertilizers. The spatula is used when transplanting plants, to add fertilizer. They are made of stainless steel with a rubberized handle. Hand tools for caring for plantings can be used not only for indoor potting, but also in small greenhouses, greenhouses, when decorating summer cottages, personal plots, loggias with flowers.

flat cutter

The theoretical basis for the use in the reclamation of virgin lands, in contrast to plows, was laid at the beginning of the 20th century, and was practically implemented in the 50s of the last century during the development of the Kazakh virgin lands. At the same time, the flat cutter cuts off the roots of weeds, produces loosening, but the top layer does not turn over, which does not violate the soil structure and increases productivity. A flat cutter consists of several pointed flat peaks or flat knives fixed on vertical rods of reinforcement, which, when moving, go to a depth of 10-20 cm, cut the upper layer.

How to make a manual cultivator with your own hands

Manual cultivators for tillage in the country can be made with your own hands. For this you may need:

metal narrow strips or pins,
wooden or metal cuttings with the possibility of fixing horizontal handles;
a standard set of tools - a screwdriver, a hammer, a grinder, pliers, a vice, a chisel, screws.
some products may require a grinder and welding work.

Making a cultivator

The most famous manual cultivator is Fokin's flat cutter. A design close to it can be made independently. For this you will need:

steel strip 3-5 mm thick, 40-50 cm long and 4-6 cm wide;
wooden round or square handle;
4-8 wood screws.

The manufacturing process will include several steps, for which you will need a vice, pliers, a chisel, a grinder. To make a flat cutter, do the following:

drill 4-8 holes in the strip on one side for its fastening;
bend the steel strip in the form of the number "7" with straightening its lower part;
harden the workpiece - bring it to red with a blowtorch or put it in a fire, then let it cool;
on one side of the square wooden handle, make a handle that is comfortable for the hand (if you have a round handle, make a flat surface with a chisel from one edge for attaching the strip);
fix the strip on the flat surface of the handle with self-tapping screws;
sharpen the horizontal part of the flat cutter on a grinding wheel.

Tornado

If it is not possible to purchase a Tornado fork root remover, you can do it yourself. The easiest way is to change the shape of the teeth of conventional forks - the bases of the teeth must be placed evenly around the circumference, and the sharp ends should be bent in one direction in a spiral. Instead of a handle, it is desirable to weld a vertical professional pipe up to the owner’s chest with a transverse handle 80 cm in shape resembling the letter “T” to the tuleyka. The handle should be comfortable to grip with two hands along the edges, and the increase in the lever will facilitate the process of cutting into the ground when turning it.

DIY star cultivator

The main tasks of the star cultivator are cutting the roots of weeds at a depth of 10-20 cm, mixing the topsoil. This task is easily handled by low-power manual electric and gasoline motor cultivators. Simplifying the creation of a home-made such unit can be used in the design of an old bicycle with the transmission of wheel rotation to the star by means of a chain drive. For those who want to make a simple star cultivator, you need to stock up:

sheet metal 2-3 mm thick;
smooth rod with a diameter of 5-8 mm;
a tube 20 cm long and an inner diameter of 7-10 mm, which must correspond to the diameter of the rod;
a tube 15-20 cm long and with an inner diameter of 30-40 mm to create a tulle; a metal or wooden handle with a diameter of 30-40 mm and a length according to the growth of the farmer.

Creating such a device on your own is fraught with the difficulty of solving the problem of rotation of stars or cutters without friction. The use of a complex mechanism with bearings for this purpose will create many additional tasks - the need for lubrication, protection from the ground, moisture. Instructions for making a simple star cultivator include:

From the available steel sheets, the angle grinder cuts out 6-7 beam stars with a beam length of 5-8 cm from the disk and a hole in the middle.
The tube is cut into 2-3 equal parts and welded to the sprockets.
The resulting rotary disk element is mounted on a rod (rotation on it must be free).
The rod is bent to give it a bottle-like appearance (while its ends are connected together, the arc of the bent rod should not interfere with the movement of the rotation element).
The ends of the rod are inserted into the pipe and riveted or welded to the tuleyka.
A stalk is inserted into the tuleyka and fastened with a self-tapping screw.
A strip 3-5 cm wide is cut out of a sheet of metal, which is given a U-shape.
The strip is attached to the rod closer to the tuleyka.
After anti-corrosion painting, the tool is ready for use.

Cultivator from an old bicycle

An old bicycle can be an ideal blank for creating a cultivator. This requires a frame, steering wheel, and one of its rear wheels. A drawing of such an alteration can be found on the Internet. Do the following:

remove the front wheel;
turn the steering wheel with the handles outward and fix (can be welded);
remove levers with pedals;
half shafts with cutters can be fixed to the axis of the front star on both sides;
if you leave the chain, then the rotation of the wheel will be transmitted to the star and rotate the cutters, to speed up the rotation, it is advisable to swap the large star and the sprocket on the wheel;
on the lower part of the vertical seat tube, fix the pipe with fasteners with bolts for additional attachments - rippers, plows, hillers, slotters, harrows;
the control of such a unit consists in pushing the handles with the wheel forward;
You can adjust the depth of penetration of the cultivating tool into the ground by pressing down.

Advantages and disadvantages of manual cultivators

Agricultural work - digging, weeding - is hard physical labor. Therefore, any means of simplifying it will always be appreciated by farmers. Caring for indoor plants, a flower garden in the country will require the use of manual rippers, spatulas. Garden plots with an area of more than 3 acres will be difficult to process without a universal motor cultivator with a set of different attachments. For small plots, complex sites or greenhouses, the use of manual cultivation tools is justified. Their pluses are.

The hard physical labor of a farmer can facilitate such a gift of human genius as a cultivator. You don’t even need to buy it, any gardener can easily make a tool with his own hands. Step-by-step instructions for creating an electric cultivator, Tornado cultivator and other options are in this article. Plus a list of necessary parts, drawings, advice and feedback from experienced inventors.

Cultivator instead of a shovel

Hectares of dug up and loosened land will not add either strength or health. Especially if the tedious procedure must be carried out every spring and autumn. Yes, and digging up 6 acres manually is a laborious task.

An electric cultivator is able to help the summer resident, facilitate and speed up the process. The garden tool works and loosens the soil, opening its layers, and breaks the earthen ball, saturating it with oxygen. With the help of an electric assistant, you can remove weeds and hill plants.

Attention! The choice of the tool you need depends on the type of beds and the set of crops grown. If it is a greenhouse or a zoned area with a flower garden, a vegetable garden and a garden, then light options with manual control will do. Larger areas require higher-end power tools.

The approximate cost of a cultivator created in an industrial environment varies from 5 to 30 thousand rubles. depending on the type. And if you also need a lawn mower, a lighting system for seedlings, drip irrigation in a greenhouse, and much more that you want to mechanize and improve, then this amount can be saved.

To help the farmer - 5 variants of the cultivator, collected and tested by Russian summer residents. To create inventions, ordinary tools and spare parts that are at hand are suitable.

DIY small hand cultivator

Summer residents affectionately call this type of home-made tool "baby".

It is suitable for small areas, including greenhouses. Extremely lightweight and easy to use. It looks like a massager on the handle, only instead of small spikes there are sharp wedges.

For manufacturing you will need:

long handle with a diameter of 24 mm. length corresponding to the growth of the farmer or purchased cuttings;
massive wooden axis;
5 strong heavy discs with a diameter of about 150 mm. with holes in the middle and sharp spikes along the edges. They can be cut out of metal yourself.

Installation steps:

Discs are mounted and fixed on a metal pin.
A pin with sharp disks is attached to a massive wooden or metal axis.
The design is put on and firmly screwed to the handle or to the handle.

Cultivator "Kid"

Tool advantages:

convenient to use outdoors and in the greenhouse;
if desired, you can supply a motor.

captures a depth of about 20 cm. Considering the statement of microbiologists that deep loosening of the soil kills aerobic and anaerobic microorganisms, this minus can be considered a plus.

Making a tornado cultivator

The tornado garden tool looks like a big corkscrew with handles. Several of its blades are located at an angle to each other. When working, they are screwed into the ground, facilitating the work of the summer resident, because there is no need to bend down. Tornado is ideal for digging ripe potatoes. The bushes of the plant are simply scrolled clockwise and pulled out of the ground along with the tubers. The tool can remove weeds along with the roots and hill the beds with rotational movements.

Attention! The length of the handle along with the pitchfork should correspond to the height of the person. The blades in the curved state should reach 25 cm.

To build a tornado you will need:

pitchfork;
plastic nozzle for the handle;
half a meter of a pipe of such a diameter that it is put on a plastic nozzle handle.

Installation steps:

The pipe is cut in length and put on the handle so that it protrudes 25 cm on both sides. That is, the top of the handle acquires a T-shape. Fasten the pipe with tape.
The fork teeth are shaped with a hammer. That is, they simply twist them in a spiral.
Connect the handle and forks. The tool is ready.

Cultivator from an old bicycle

One of the most common options among gardeners. It is easy to install, no parts need to be welded. By design, it is considered a little more complicated than a tornado.

For assembly you will need:

front part of a bicycle frame with a wheel;
working surface of a two-handed saw;
instruments.

Installation steps:

The cutting surface of the saw is attached to the part of the frame cut off by the grinder. Its role can be played by a plow or a surface with sharp spikes, made independently.
The handles of the device must be longer than a bicycle handlebar. They are constructed from pipes and attached to the frame.
Fasteners must be motionless, each of them is tightly bolted together.
The wheel must also be fixed to the frame.

The result is a convenient home-made device for loosening. If desired, you can strengthen the motor on it.

Mini cultivator with wheel

Production of a disc rotary cultivator

A disk-based tool is capable of harrowing the earth, breaking up its lumps, and leveling the surface. Making it is much more difficult than all of the above options, this requires special skills.

For assembly you will need:

disks;
staples;
sleeve;
stock;
pipe, handle.

Installation steps:

Convex discs are welded to bushings mounted on the axle.
In brackets, you need to fix the axis using a cotter pin.
A pipe with handles and a crossbar passes through a large bracket.
A rod protruding above the crossbar is screwed into a rod welded to a small bracket.

In fact, the design of the trip to the "baby". But it is much stronger and more functional.

An electric tool from improvised materials can be made in 2 days, but you need to prepare in advance.

For its assembly, it may come in handy: an engine from a washing machine, a gearbox, "sprockets" and a chain from a children's bicycle, bearings, cultivator knives welded from car springs, corners, wheels, a cable about 50 m long, a piece of tin to protect the motor from the soil . Instead of a washing machine engine, you can use a powerful Soviet drill, plus a gearbox from a burnt grinder, or an electric meat grinder.

A structure assembled from one or another of the proposed elements will look something like this: a metal frame with two wheels on both sides. The engine from a washing machine, meat grinder or drill is in the center. It must be connected to the cultivator's knives and rotated using a chain and sprockets from a children's bicycle.

On two handles, you can attach a cable with a trigger.

Advice. The sharpened parts of the knives must be positioned on the side of rotation of the shaft. The blades should be 5 cm apart, at an angle of 120°.

Installation steps:

First, the main parts are made and fastened, then a frame is made under them. Dimensions depend on the materials at hand that you use.
A gearbox with a transmission mechanism is welded to the motor housing.
Blades are attached to the output shaft of the gearbox. You can use sharpened and fastened machine springs or any other metal.
An engine is attached to a frame made of corners with clamps and bolts.
On the central axis there should be an axle with wheels on the sides.
Handles and cable are welded on top.

Unit advantages:

light and convenient electrical design;
environmentally friendly, unlike mechanisms that run on gasoline. So, you can use it in greenhouses and greenhouses.

in the manufacture it is necessary to use welding;
not suitable for processing large areas.

Mechanical improvements not only make work easier, but also increase the efficiency and speed of tillage. Any of the considered tools of the farmer is indispensable when working on the ground and easy to use.

To ensure a good harvest in your beds, it is not enough to plow the land and sow it. During growth, and especially the maturation of crops, the land must be constantly cultivated. Hilling is carried out, weeds are removed, the hardened surface is loosened between the rows.

All this can be done with a chopper or a shovel. However, labor efficiency increases by an order of magnitude if the soil cultivator is mechanized.

Any owner can make such a device with his own hands. Special tools are not required, except perhaps a welding machine.

Needless to say, this idea is not new. Many decades ago, when the population of one-sixth of the Earth was experiencing a dacha and garden boom, such tools were popular. They were bought in hardware stores and, if possible, made on their own.

Consider options for how to make a homemade manual cultivator

The main types of tools:

flat cutter It is a mechanized version of a conventional chopper.

Rotary star. The principle of operation is to alternately cut the soil with flat knife-like elements.

Manual cultivator hedgehogs. The design is similar to the star, but the ground is pierced not by knives, but by sharp steel rods, similar to porcupine quills.

Tornado. It is a pitchfork with teeth twisted into a small spiral. It is not subject to mechanization, it just needs to be stuck into the ground.

How to make a manual cultivator for a summer residence from improvised materials?

Used materials and tools:

Steel strips, pieces of reinforcement, or other metal blanks, depending on the model chosen;
A wheel with a mount, or a finished frame (for example, from a bicycle);
Pen. You can use a metal pipe or a shaft from a shovel;
Welding machine (preferably);
Drill, Bulgarian.

Cultivator "Tornado"

It is very easy to make it. The base is made of steel pipe. We weld steel bars to the end to form a square.

Then the rods are bent in a helical manner, and the ends are sharpened. You can use the shaft of a shovel as a handle, or adapt a bicycle handlebar as a lever. Then it will be easier to perform turning movements.

With such a cultivator, they loosen the soil to a great depth, dig out the roots of shrubs and prepare holes for planting trees.

Cultivator

The frame is made from square tubing. One weld point at an angle of 30°. We weld a fork for a wheel from a steel tape 3 mm thick to the frame. The type of wheel does not matter, it can be ready-made or homemade iron.

7 country miracle helpers!

Unusual hand gardening tool (photo, video, drawings)

The flat cutter is a great achievement of the agricultural mind. This is the first truly versatile garden tool. Not just for tillage, but a tool for comprehensive cohabitation with the cultivated plant community and soil.

Fokine flat cutter "Swift"

2. Ripper Wonder-shovel "Plowman"

Ripper Wonder-shovel "Plowman" blueprints:

A shovel, which can be attributed to the category of cultivators-cultivators - "Plowman". The mechanism of the ripper Plowman is simple and quite effective. The raising of the earth is carried out by the work of a simple lever. The main load falls on the legs, with which the working forks are pressed into the ground. The lifting of the soil comes from the effort of the hands, which unloads the back and is therefore attractive to the elderly and gardeners suffering from back pain. Two opposite forks, passing one through the other, loosen the ground without wrapping it, providing a loosening depth of 15-20 cm.

Advantages of the design of a shovel or soil cultivator or potato digger

1. Deep tillage without seam turnover.

2.High productivity.

3. Significant physical effort is not required when processing the formation.

4.Available in manufacturing.

Mode of application:

A feature of tillage with a miracle shovel is that the garden is not dug across, but along. With both outstretched hands we take the miracle shovel by the edges of the upper bar, step on the platform (footboard) and it easily enters the ground. With a slight movement (can be combined with a slight shaking), stepping back two steps, we transfer the shovel from a vertical position to an almost horizontal one. After that, we take a step forward, pull the shovel back 30 cm, give the shovel a vertical position, drive it into the ground and repeat the cycles until the row ends. Then we proceed to the processing of the next row.

Materials: half an inch of labor, round timber (or hexagon) with a diameter of 15 mm.

For ease of transportation, you can make a collapsible design.

Miracle shovel Prokopenko blueprints:

Miracle pitchforks allow you to dig up the ground without loading your back at all due to the unique rotary way of working. Miracle pitchforks do not require you to bend down or squat. Efforts are applied only to the "steering wheel". At the same time, the productivity of digging increases by 3-4 times.

Miracle forks are adjustable in height over a wide range, which allows you to perfectly fit the tool to your height.

Miracle pitchfork swivel photo:

Miracle shovel of a monk - Father Gennady photos and drawings:

The Miracle Cleaver is a tool for easy and safe wood splitting. You can chop three times as much wood with the same amount of time and effort as with a regular cleaver. At the same time, even women and children will be able to chop wood, because the main work consists only in raising and lowering a kettlebell weighing 3.3 kg.

One Wonder Cleaver replaces four tools: Cleaver, Axe, Hammer and Chisel. If you follow the instructions for use, the tool is absolutely safe.

The Miracle Cleaver allows you to chop even very thick logs. However, it does not require any special skills and is very easy to operate.

Miracle Cleaver photo:

6. Miracle potato hiller

The miracle hiller is designed for loosening the soil on potato ridges and hilling up the sprouted potatoes.

Thanks to an optimally calculated design, the new invention contributes to high-quality soil cultivation (loosening and hilling) and the correct formation of a potato ridge.

Categories

Popular