Overview of Kiturami diesel boilers - technical specifications. High efficiency and simple design - this is the Kiturami diesel boiler Kiturami gas boilers instructions

The Korean company Kiturami focuses primarily on the manufacture and sale of heating equipment. All heaters of this brand symbolize high quality, which is the reason for such popularity of products. In production, only modern technologies are used, thanks to which the consumer is guaranteed to receive stable operation of the devices throughout the operational period. So, today we will talk about Kiturami diesel boilers, but first we will get acquainted with all the products of this company.

Diesel boilers from the manufacturer

All diesel fuel boilers from Kiturami are double-circuit and are manufactured in several series, let's get acquainted with them.

- These are devices whose power can reach 35 kilowatts. The power, as we see, is insignificant, but there is a turbocyclone burner, and the cost is low. All models are designed for use in private houses or cottages, the area of which does not exceed 350 square meters.

Specifications	Unit rev.
Power	kWh	15	19.8	24.5	35
Heated area	m2	up to 150	up to 200	up to 250	up to 350
efficiency	%	92.8	92.9	92.8	92.7
Average heat consumption	l/day	4.9-6.8	6.1-8.6	7.3-10.4	10.0-14.5
DHW capacity	l/min at T=40C	5.2	6.5	8.2	13.0
Heat exchanger area	m2	0.78	0.92	1.03	1.03
Heat exchanger capacity	l	23	32	29	29
Boiler dimensions WxDxH	mm	310x580x835	360x640x920	360x640x920	360x640x920
Boiler weight	kg	64	75	85	88
Electricity consumption energy	W/h	120	170	200	280

Table of technical characteristics of boilers of the Kiturami Turbo model

Kiturami STS- similar devices, differing in that they are made of stainless steel.

Model	Power	Heating area	DHW at dT 25 C	HxWxD-mm	The weight
Kiturami STS 13 OIL	16.9 kW	160 sq.m	6.2 l/min	700x325x602	30 kg
Kiturami STS 17 OIL	19.8 kW	190 sq.m	6.7 l/min	700x325x602	30 kg
Kiturami STS 21 OIL	24.4 kW	240 sq.m	8.3 l/min	700x325x602	32 kg
Kiturami STS 25 OIL	29.1 kW	290 sq.m	10.4 l/min	930x365x650	48 kg
Kiturami STS 30 OIL	34.9 kW	340 sq.m	12.5 l/min	930x365x650	48 kg

Table of technical characteristics of boilers of the Kiturami STS model

Kiturami KSOG- high-power devices (up to 465 kilowatts) of a two-coil type, also consuming diesel fuel. These Kiturami diesel boilers have a built-in turbocyclone burner and are intended for operation at industrial facilities up to 4650 square meters, as well as for supplying hot water.

Note! All mentioned boilers have an electronic control unit, which is equipped with numerous functions. In addition, the manufacturer provides for the possibility of installing a room thermostat, which allows you to control the temperature in the room directly on site.

Table - Comparison of models and prices of Kiturami heat generators

The lineup	Name	Power, in kilowatts	Cost, in rubles
Kiturami KSOG	50R	58	95.5 thousand
	200R	230	304 thousand
	150R	175	246 thousand
	100R	116	166.6 thousand
	70R	81	104 thousand
Kiturami STS	30R	35	63 thousand
	25R	29	55 thousand
	21R	24	50 thousand
	17R	19	42 thousand
	13R	16	41 thousand
	30R	34	52 thousand
	21R	24	50 thousand
	17R	19	40.6 thousand
	13R	15	38 thousand

Strengths and weaknesses of diesel units

So, we found out that all boilers from this Korean manufacturer embody excellent quality, functionality, affordable cost and modern design. The fuel in this case can be both light oil and kerosene. If the burner is replaced, it is also possible to switch to natural gas.

Other advantages of the devices include the presence of security sensors with which you can control the main work processes. Tellingly, when creating these sensors, a unique technology was used regarding the removal of fuel combustion products.

A distinctive feature of the models of the Turbo series is that they include floor-mounted diesel heat generators that can not only heat the room, but also heat water for domestic needs. Therefore, there is no need to purchase an expensive boiler, because all models of this series already belong to boiler-type devices.

Another advantage is the high degree of protection provided by the fact that the boilers are built in:

sensors;
forced removal of flue gases;
control bullets;
thermostat.

The common advantages of all boilers of this manufacturer include the fact that they are quite capable of functioning in any conditions, and this is quite relevant for our country. And buying spare parts for Kiturami boilers is also not difficult, since the company has many dealerships.

When compared with boilers made by other manufacturers, Korean models are distinguished by one of the most economical fuel consumption. And if we talk about the performance of hot water, then this figure can reach twenty liters per minute.

And now let's talk about the main advantage of the described boilers - this, of course, is their affordable cost. To date, Kiturami diesel boilers can be purchased for the amount from 20-30 thousand rubles. Moreover, this equipment is distinguished by the widest model range, due to which the requirements of not only the owners of country houses, but also the management of industrial facilities will be satisfied.

Model Kiturami Turbo-13R: comparative characteristics

As an example, let's take one of the most popular models of boilers from this manufacturer, namely the Turbo-13R. It is characterized by the fact that it is made in the floor version and can be used both for heating and for providing warm water. The main advantage can be considered the presence of a turbocyclone burner.

How is this burner different? First of all, it functions according to the technology of a turbocharged engine in a car: due to the high temperature, which can reach 800 degrees, the gas is completely burned out in a special metal plate (the so-called secondary combustion takes place). And thanks to this, you can not only save on resources, but also significantly reduce the amount of harmful substances released into the atmosphere.

Note! To control this boiler, a special remote control is used, located on the front of the case.

There is also an alternative to such control - a thermostat installed in one of the premises of the house. Among the functions of this device are:

integrated security (this includes self-diagnosis, combustion sensors, fuel shortage sensors, etc.);
programming;
lack of people in the room.

To date, thousands of users have already tried and convinced themselves of the quality of this boiler. Many of them subsequently spoke about the high quality of not only Turbo, but of all Kiturami products as a whole.

And this is how the boiler looks from the inside in an open, disassembled form:

Video - Kiturami Turbo-13R

Instrument installation and maintenance

So, we found out that Kiturami heat generators have excellent characteristics, but it is worth remembering that during their operation the relevant requirements should be followed, otherwise the most reliable device in the world will require a major overhaul.

The very first thing that many boiler users encounter is installing an already purchased model. During installation, it is necessary to adhere to all the requirements of the manufacturer, for this reason it is much better if qualified specialists take over the work - in this case, there will be no risk of having to repair the device immediately after the installation work is completed. Indeed, in most cases, the cause of an early breakdown of the device is just its incorrect installation. And to avoid all this, you have to pay a little extra.

Due to the fact that the diesel heat generator is equipped with a fuel tank, certain operational requirements are also imposed on it. So, only pure fuel can be poured into the tank, in addition, it should be cleaned regularly, as well as the boiler itself. For this reason, when buying, you should pay attention to whether the tank is equipped with a sediment outlet pipe and a fix bag.

Note! Before turning on the boiler itself, fill it with fuel and let it stand for at least twenty minutes. Only after that you can proceed to the device settings.

If voltage drops often occur in your area, then do not spare the money and also buy a stabilizer that can save the functionality of the control unit and various sensors present in the device. But proper installation and competent operation is not all, because Kiturami diesel boilers need periodic preventive measures. Such activities consist of:

mechanical cleaning;
checking all nodes is not a matter of operability and the presence of leaks.

Some of these works can be done with your own hands - for example, connect the device itself - but it is advisable to entrust the rest to professionals. And always remember the need to care for the heat generator, so carry out all these activities in advance. So you can avoid a number of minor problems, as well as prevent more serious ones.

Kiturami boilers - customer reviews

As noted above, Korean heating appliances are becoming increasingly popular and this is not surprising. All the people who bought diesel boilers of this brand and use them unanimously talk about the main advantage of the product - namely, the special design.

Today's heat exchangers are made of high-alloy steel, which is significantly superior to its counterparts in terms of durability. At the same time, their contours are made of copper, which is why they are perfectly combined with antifreeze or ordinary water. It is thanks to this feature that boilers have a high thermal conductivity.

Among other features noted by users, the electronic system, which is equipped with both indoor and outdoor consoles, deserves special attention, thanks to which the control procedure is noticeably simplified, and a person can observe the operation of the equipment from anywhere.

Video - Diesel boilers Kiturami

As a small conclusion

When analyzing some models, we found a lot of advantages for boilers of this brand over their competitors, although even here they could not do without drawbacks.

This applies in particular to liquid fuel (diesel) appliances. Each boiler that consumes diesel fuel is necessarily equipped with a special fuel tank, which in most cases has a very significant volume - from 2,000 to 5,000 liters. Boilers are equipped with such tanks, but in the absence of the latter, you will also have to fork out for the purchase of a “tank for diesel fuel”.

To install such a boiler, it is necessary to have a room with excellent ventilation, so that the user does not accidentally get poisoned by fuel combustion waste. In some cases, heat generators even smoke, which is why they need special care. Finally, one should not forget about the cost of diesel heating appliances - it is often higher than that of appliances using other types of fuel (even though Kiturami boilers are cheaper).

Despite all the strengths and weaknesses of such boilers, modern technologies can significantly improve the safety of the operation of devices for space heating. And we all know that safety should come first. Moreover, this equipment can work autonomously, maintain the required temperature for a long time, even if there are no people nearby.

Video - Kiturami Turbo-30R

Assortment of Kiturami

All heating boilers from this Korean manufacturer are divided into three categories, each of which has its own characteristics, strengths and weaknesses. This is:

diesel;
solid fuel;
gas heaters.

Let's get acquainted with each of the types.

Diesel devices, as the name suggests, operate on diesel fuel, which increases the efficiency of heating. The model range of such boilers will be discussed in more detail in the next paragraph.
Solid fuel appliances are an alternative to the previous option, since they are quite capable of operating on both diesel and solid fuel, which is especially important in conditions of an unstable supply of energy resources. These boilers are made in such a way that after solid fuel is used, they begin to burn diesel itself. All diesel devices are combined into one model range - KRM. There is an automatic control, it is possible to use for domestic hot water purposes.
Gas appliances use natural gas, which is why they are now very popular. They are floor or wall, for one or two circuits. They are quite convenient to operate, and the savings in their use are obvious.

Heating the house in winter is a top priority for every homeowner today. Most of all, this issue is relevant for owners of suburban housing. And although modern gas boilers are the most advanced, they are inaccessible to many people due to the constant increase in the price of this type of fuel.

Therefore, a large number of consumers choose other alternatives, one of which is the Kiturami diesel boiler. Although they are not new on the market, they have not lost their popularity at all. They are able to provide high-quality heating in the house.

Today Kiturami is a well-known South Korean concern, one of the largest manufacturers of heating equipment. Repeatedly, the boilers of this company were awarded diplomas for reliability and technical perfection, and due to the presence of certificates that meet all international standards, the Kiturami diesel heating boiler is exported to almost all countries.

What is the peculiarity of heating equipment from Kiturami?

The Kiturami concern is engaged in the production of various types of heating equipment, which includes biofuel and gas installations. But it was Kiturami's diesel heating equipment that brought the concern such great fame and a high rating. The name diesel itself speaks of the type of fuel on which it runs.

Rice. one

The most popular model in the line of this manufacturer is the Kiturami Turbo 17 diesel boiler, the purpose of which is hot water supply and heating of industrial and residential premises. Boilers from the manufacturer Kiturami are very convenient for use in country houses, when the need for hot water does not arise daily, and heating is required only during the presence of the owners there. In addition, with proper operation, repair of such equipment is very rarely necessary.

The main advantages of Kiturami diesel heating equipment include:

the diesel copper of Kiturami is convenient in operation. The control panel allows you to set any control function. Kiturami's work on the coolant and room temperature is regulated by a thermostat built into the remote control. The boilers are independent of the size of the chimney and the presence of draft due to the presence of a turbo blowing effect, which forcibly sends the exhaust gases to the chimney;
diesel Kiturami is highly economical. Thanks to the aerodynamic flow in the combustion chamber, maximum efficiency is achieved in terms of the amount of fuel consumed;
setting up the equipment is absolutely simple, and you can do it yourself;
The house has hot water all year round. Boilers of the Kiturami brand are also used at a time when the room is not heated;
The Kiturami diesel boiler has a self-diagnosis system that informs on the display about its operation and the malfunctions that have occurred, showing the real state of the system. If you constantly monitor the display readings, then the need for repairs will be minimal.

Features of Kiturami in operation

The diesel heating unit represented by the Kiturami concern differs significantly from other brands in its characteristics, both in terms of the method of maintenance and the need for repair. Only high alloy steel is used to manufacture the heat exchanger.

Rice. 2

Kiturami brand boilers are made of copper, which is highly resistant to water. If we talk about the price, then in comparison with stainless steel, copper is much cheaper, and, accordingly, a diesel boiler costs accordingly. In addition, copper significantly increases the heat resistance of equipment.

The quality of the Kiturami Turbo depends on how correctly placed the tanks in which the fuel is stored. Here it is necessary to correctly place the tank and expose it in three surfaces. It is imperative to take into account that a drain is provided in the sedimentation tank. The Turbo tank should be cleaned regularly and sediment drained, and the diesel engine should only be filled with fuel in a cleaned form. Such handling contributes to trouble-free operation, and the need for repairs is not needed.

When the Kiturami diesel boiler is filled with fuel, the instruction says that you need to wait half an hour until it settles. Only after this, the Turbo diesel boiler can be started and the necessary modes can be adjusted. It is also advisable to use a stabilizer to avoid repairs from sudden changes in mains voltage. It will ensure the stable operation of the control unit, as well as protect the heating unit from premature repairs.

In order for the Kiturami diesel heating boiler to work smoothly during operation, the following is necessary:

the boiler setting must be carried out correctly and correctly, then the need for repairs will be minimal;
a diesel boiler requires the systematic implementation of its mechanical cleaning in order to protect it from premature repairs;
Turbo should regularly monitor the operation of all its connections and assemblies for leaks;
the performance of the equipment must be checked regularly so that it is not necessary to prematurely repair Kiturami diesel boilers.

Equipment installation and connection

All the requirements for connecting Kiturami are absolutely not difficult to fulfill on your own. You can install the Kiturami diesel boiler without the help of specialists, it is enough to carefully study the scheme and recommendations of the manufacturer. But at the same time, there are many operations that require the presence of qualified craftsmen in order to subsequently avoid incorrect actions.

For those people who for the first time have to assemble heating equipment Kiturami diesel boilers, the instructions and the installation scheme will serve as a good example of such work. It is very important that the Kiturami Turbo is connected using the electrical diagram of the boiler and that all recommendations for connecting to the mains are clearly followed.

Who is not sure that he can independently perform all the work on which the setting of the Kiturami diesel boiler directly depends, it is best to involve specialists, and thus avoid possible errors and premature repairs.

The Kiturami diesel boiler requires an extremely precise order and principle of its installation, since an incorrect connection is most often the cause of equipment failure and it becomes necessary to carry out expensive repairs of Kiturami diesel boilers.

Description of Kiturami malfunctions and repair

The Kiturami diesel boiler belongs to the economy option and has a rather long service life. But there are situations when the boilers fail prematurely. The reason for the need to repair Kiturami is their untimely service or the use of poor quality fuel.

A simple repair of Turbo boilers can be carried out independently, but it is more rational to contact service organizations in case of malfunctions.

Rice. 3 Installed boiler Kiturami

Below are the main error codes that the Kiturami Turbo 17 diesel boiler is most often exposed to:

when the lights on the display flash "01", "02" or "03" - it means that there are problems in the flame detector and ignition does not occur. The Turbo boiler in this case should be restarted according to the instructions;
error "04" indicates that the water temperature sensor is faulty in the Kiturami heating system, and repair in this case becomes inevitable;
error "08" warns that the path between the boiler and the temperature sensor is very long or a wire break has occurred in some place. Repairs will be required to identify the immediate cause of the failure;
error "95" means too low pressure in the heating circuit. The Turbo boiler must be energized and the entire heating system must be examined for the possibility of leaks;
error "96" - the mechanism that protects the Turbo system from overheating has worked;
error "98" - indicates that there is a lack of fuel in the supply line.

Of all the errors described above, “01” flashes most often on the display, but this does not pose a great danger to the operation of the equipment. The diesel boiler Kiturami Turbo 17 is characterized by maximum efficiency. Thanks to the control panel, the boiler control functionality is achieved and room heating is possible in any temperature regime.

In Turbo it is possible to regulate temperature parameters step by step from 45 to 75°С. All information about the operation of the diesel Kiturami Turbo on the thermostat screen is displayed by the self-diagnosis mechanism.

Most often, the Kiturami diesel boiler gives error 01. This happens when there is no stable ignition in the Turbo.

The reasons may be as follows:

when the screw jams, which serves as a fuel level limiter. The repair consists in the need to replace the locking element or check the injection motor;
when the blower motor fails. It is necessary to check the working condition of the Kiturami motor. If the motor is faulty, then the repair consists in replacing it with a new one;
when there is a lack of incoming fuel, then its level should be checked in the tank, in this case repairs will not be needed;
when a third-party object accidentally appears in the screw gate, then it must be removed during the repair process;
when the photosensor fails, the Turbo repair consists in checking this element for its operability.

When the error code “01” periodically appears on the display, then in such cases it is necessary to seek help from the relevant specialists in order to avoid major costly repairs.

Carrying out regular maintenance and repair of Kiturami is a guarantee that Turbo boilers will work efficiently and reliably. If irreparable damage occurs in the diesel boiler during the warranty period, then it is repaired without the need to pay for such work.

The Kiturami Turbo diesel boiler has excellent performance, but it must always be remembered that non-compliance with the established installation scheme, correct settings and elementary rules for handling it in many cases ends with a total repair. When all requirements for use and operation are met, modern technologies for the production of Kiturami heating equipment guarantee each user stable operation of the boiler without the need for repair and a long service life.

Even at the heating design stage in the house, one has to operate with the generalized technical characteristics of the boiler, but in the end it is still necessary to go to the store and choose a very specific model from the huge range on the market.

It will be useful to find out in more detail what the Kiturami diesel boiler is, what models are in the line, and how they can be better than other offers on the market.

Features of Kiturami boilers

Kiturami is a South Korean company with more than half a century of experience in the design and manufacture of heating boilers and related equipment.

During this time, the company has become one of the leaders in the domestic Korean market, and has also found an extensive market in North America and nearby Asian countries. In our country, Kiturami boilers have been officially distributed for at least ten years and have already shown themselves on the good side.

The main emphasis in the promotion of boilers is on the introduction of innovative technologies and, in particular, their own developments, which have no analogues from other manufacturers or determine the narrow specifics of the equipment.

Diesel boilers, by definition, are not considered as the main model range for a wide range of applications. In terms of economic feasibility, they are inferior to gas, electric and even solid-state boilers. However, they are still in demand among consumers in view of a number of reasons why liquid fuels are becoming preferable.

In remote areas of residence, where there is no stable connection to the power grid, there is no gasification, the issue of fuel availability becomes acute. At the same time, the heating of the house should, by definition, work smoothly throughout the season. If for many countries such situations are rather an exception to the rule, then for us, on the contrary, they are commonplace, the cause of which is the vast expanses separating settlements.

Diesel fuel, unlike gas, is easier to transport and store with minimal risks to life and the environment. Unlike solid fuel boilers, when burned, diesel fuel provides uniform heating and a greater degree of control over the waste of resources. And finally, the design of the diesel boiler and in particular the burner does not limit the use of other heat sources.

With minimal modifications, the diesel burner can be replaced for the use of blue fuel, and boilers equipped with an extensive combustion chamber and a grate, can quickly switch to charcoal, wood or pellets.

Diesel boilers Kiturami are highly technological and are a perfectly balanced equipment for the use of diesel fuel as a heat source, and at the same time they are excellent for the above types of conversion to work on gas or solid fuel. So constructive and functional flexibility is the first significant advantage.

Kiturami boilers often use their own designs and unique layouts. On the one hand, this reduces the maintainability of heating equipment, but on the other hand, it ensures the highest efficiency of the boiler and balanced operation while observing simple and transparent operating rules. This is the second significant reason to turn your attention to diesel boilers from South Korea.

The last advantage is the cost of boiler equipment. Even taking into account the high performance and proven quality of the boilers, their cost does not exceed the average on the market among similar offers.

So it turns out that Kiturami boilers have three features: a balanced design, high efficiency and an affordable price.

Kiturami boiler device

Specifications

The operational characteristics, dimensions and parameters of the Turbo series boilers are presented in the table below. It is clearly seen that a series of floor-standing diesel boilers covers a power range from 10 to 35 kW, which is quite enough for heating houses up to 250-275 square meters. Part of the heat will go to the preparation of hot water, which must be taken into account in the calculations.

All Kuturami boilers are double-circuit and heat exchangers, by the way, are ideally designed specifically for these tasks.

Boiler model	Unit ism	TURBO-9R	TURBO-13R	TURBO-17R		TURBO-21R		TURBO-30R

Power	kcal/hour	9000	13000	17000		21000		30000
Power	kW	10,5	15,1	19,8		24,4		34,9
Fuel consumption	liter/hour	1.13÷1.5	1.6÷1.97	1.87÷2.15		2.28÷2.80		3.75÷4.30
efficiency	%	92	92	92.2		92.4		91.8
DHW consumption	∆t=25ºC	6,0	9,7	11,3		14,0		23,3
	∆t=40ºC	3,8	6,1	7,1		8,7		14,6
Heating supply and return	mm	25	25	25		25		25
Hot water inlet/outlet	mm	15	15	15		15		15
Chimney diameter	mm	80
Power supply	V/Hz	220/50(60)
Power consumption	Tue	80					160
External size	w×d×h	325×600×835	365×650×930
The weight	kg	60	79		85		85		85

Fuel consumption

Fuel consumption is specified in the table with technical requirements. However, please note that the actual flow rate depends on individual settings. Under the actual power required for heating the house, the appropriate nozzle is selected from the set proposed by the manufacturer.

The thermal power, fuel consumption and fuel combustion mode are set. The parameter indicated in the table displays factory presets sufficient to ensure proper performance if only high-quality fuel is used, more often it means diesel fuel already with winter additives that do not allow it to thicken or stand out paraffin in excess.

In a real situation, for a boiler model with a power of up to 15 kW, one can expect fuel consumption at the level of 8 liters per day taking into account the frequency of the burner and the optimal temperature in the house. However, this is not the limit.

The right approach to choosing the heating mode, as well as installing a controller with a variable temperature regime, for example, depending on the time of day and day of the week, can reduce consumption even more.

Chimney

Boilers Kuturami, gas, diesel, floor or wall-mounted, for the most part, are equipped with a closed combustion chamber and, accordingly, a forced exhaust gas system. The Turbo series, which we are currently reviewing, is no exception.

Chimney installation diagram

The chimney for boilers is used coaxial for the simultaneous supply of fresh air from the street and the removal of exhaust gases. Since the exhaust temperature after passing through the heat exchangers is no longer high, the requirements for the heat resistance of the chimney are reduced, and the list of acceptable materials is expanding.

In the best case, a steel coaxial chimney is still used, however, a ceramic vertical chimney with a group of internal separate channels for air supply, exhaust gases from the combustion chamber and ventilation of the boiler room can be effectively used in the same capacity.

The size of the chimney is strictly specified in the boiler specification and operating instructions. For the entire Turbo series, this is 80 mm.

It is possible, if desired, to make a chimney of a slightly larger diameter, but not more than 50% in excess of the specified value, that is, up to 120 mm.

In no case can the size and cross section be reduced. Even though the removal of combustion products is forced, the resistance of the chimney will greatly affect the combustion mode and the quality of the fuel burnout.

turbo 13r

The model number of the boiler corresponds to the amount of heat generated per hour - 13000 kcal/hour. In terms of the usual kilowatts, the values \u200b\u200bare obtained are 15.1 kW.

The declared power is enough to heat a house up to 150 m2. Naturally, one should take into account the heat costs for the preparation of hot water supply. If a significant consumption of hot water is predicted, moreover, regularly, then the heat output for the heating circuit will naturally be lower.

Reliability and balanced operation, combined with the affordable cost of the boiler, gives a clear advantage in the case of using several boilers simultaneously in one building, for example, when dividing the heating circuit for each floor separately or when covering a large area in two more wings, directions.

turbo 17

Boiler Kiturami turbo

The thermal power already reaches 19.8 kW, which is enough to cover the heating of a house up to 180 m2. It is possible to reasonably increase the upper performance threshold by selecting the appropriate nozzle on the burner, however, this will affect fuel consumption.

This approach allows you to solve the problem of increased DHW consumption so that you do not embarrass yourself in using hot water even in the most severe frosts without extra costs.

turbo 21r

With a further increase in power, there is a model with a declared capacity of 24.4 kW, along with this, the performance of the DHW circuit increases significantly. It should be noted that the dimensions of the boiler do not change compared to the younger models.

turbo 30r

The most powerful model in the Kiturami line of liquid fuel boilers. Performance at the level of 34.9 kW makes it possible to heat a room up to 350 m2, but at the same time the cost of the boiler in retail is approximately 45-46 thousand rubles., which is certainly an attractive option.

As in the entire line of boilers, burners with a unique flame shape and optimal fuel combustion mode are used.

The minimum amount of nitrogen oxides is recorded in the exhaust, which indicates the high environmental friendliness of the equipment.

Setting

It is better to entrust the initial start-up and configuration of Kiturami boilers to a specialist who can correctly determine the optimal operating mode, select the desired type of nozzle and calibrate fuel consumption depending on its characteristics and even the connection method and location of the fuel tank.

Nozzle for diesel boiler

For self-installation, complete with the boiler, a detailed instruction is attached, according to which you can determine the operating mode closest to the design value.

The main thing is to follow the sequence of actions defined in the technical documentation and visual aids for putting the equipment into operation.

It is necessary to adjust and adjust the boiler settings not only at the first start-up, but also during maintenance before each new season and for switching to summer mode, in which only the DHW circuit will be used.

Faults

Kuturami boiler equipment is equipped with a full-fledged self-diagnosis system built on the operation of a number of sensors. The controller is able to evaluate the condition of the equipment as well as the current mode of operation and respond to any deviations or problems that arise during operation.

In any emergency situation, the main action determined by the boiler controller is to stop the burner in order to prevent significant consequences.

A well-developed self-diagnosis algorithm allows you to identify the problem and indicate the error code on the display so that the user can take all the necessary actions to repair and restore performance as quickly as possible.

Among the frequent breakdowns of diesel boilers Kiturami:

No ignition (error code 01);
Does not start, no messages on the display.;
Coolant leakage (depressurization of the heat exchanger or one of the pipeline connections);
The flame goes out periodically with an emergency stop of the boiler;
There is no draft, the operation of the boiler is accompanied by the flow of smoke and exhaust into the room.

Error 01 and solution

If error code 01 appears on the boiler display screen, it means that for some reason the fuel did not ignite, there is no torch, the controller forcibly stops the fuel supply, issues an error message, and signals the problem to the user.

Solving the problem requires the exact implementation of a procedure that can identify the source of the problem and eliminate the obstacle in the boiler as efficiently as possible.

Briefly, the procedure looks like this:

Quite often, the fuel-air mixture is supplied under too much pressure into the chamber and therefore does not have time to ignite from the electrode. The problem is solved even at the 5th step of the algorithm by adjusting the air damper, which causes a mixture with a changed concentration to enter the chamber.

Doesn't start

The most unpleasant situation is when the boiler simply does not turn on. There are no signals on the display, and accordingly there is no error code by which it would be possible to determine the malfunction.

In such a situation, it would be adequate to call a service center specialist who will be able to understand the situation and issue the correct verdict, as well as determine the repair procedure. On your own, you can only check the presence of voltage in the network, as well as the fuses in the boiler.

leak

Most often, a leak means that a gasket seal has been damaged in some connection of the pipeline inside the boiler. It is enough to inspect the equipment and determine the place of leakage, replace the gasket.

The heat exchanger in Kiturami boilers is made of alloyed steel and copper, so it does not leak without obvious errors in the selection of the coolant or mechanical damage.

Burner goes out intermittently

The most common cause is a burner setting failure. It is important to adjust it in terms of power and, using a gas analyzer, determine the optimal air / fuel ratio for proper combustion. Such work cannot be done on your own, so it is better to contact the service center.

No draft, smoke and exhaust enters the room

Most likely the burner fan is not working for some reason. It is important first of all to check that the impeller is intact and scrolls normally.

It is possible that debris has accumulated inside the fan, or the impeller shaft is jammed. Next, the electrical part and the control unit are checked.

Gas heating boilers Kiturami series TGB-30R, KSG-50R, KSG-70R, KSG-100R, KSG-150R, KSG-200, KSG-300R, KSG-400R. User manual. Language: RU | pdf 896.41 Kb

Gas heating floor double-circuit coppers of Kiturami of the KSG series - 50/70/100/150/200/300/400. Instructions for installation, operation, service and repair. 2016 | Language: RU | pdf 5.35 Mb

Gas double-circuit heating floor coppers of Kiturami of the STSG series - 13/17/21/25/30. Instructions for installation, operation and maintenance. 2016 | Language: RU | pdf 3.44 Mb

Models TURBO 13-30R. Double-circuit heating boilers. Installation instructions. Language: RU | pdf 2.27 Mb

Models WORLD 5000 - 13/16/20/25/30R. Double-circuit heating boilers KITURAMI WORLD 5000. Technical data sheet. Language: RU | pdf 4.21 Mb

Models WORLD 5000-13/16/20/25/30 R. Wall mounted gas boilers. Technical information and instructions for installation and service. Language: RU | pdf 2.91 Mb

Gas wall-mounted boilers Kiturami series Eco condensing (open type) - 16H / 20H / 25H / 30H / 35H, (closed type) - 16D / 20D / 25D / 30D / 35D. Instructions for installation and operation. Language: RU | pdf 4.04 Mb

Gas wall-mounted boilers Kiturami series TWIN ALPHA 13 / 16 / 20 / 25 / 30. Installation and operation instructions. Language: RU | pdf 6.95 Mb

Gas wall-mounted boilers Kiturami series WORLD 5000 - 13 R, 16 R, 20 R, 25 R, 30 R, 35 R. Installation and operating instructions. Language: RU | pdf 3.27 Mb

Technical information and instructions for installation and service. WORLD5000 - 13R (15.1 kW), WORLD5000 - 16R (18.6 kW), WORLD5000 - 20R (23.2 kW), WORLD5000 - 25R (29.1 kW), WORLD5000 - 30R (34.9 kW). Language: RU | pdf 2.91 Mb

Gas wall-mounted boilers Kiturami series WORLD PLUS 13 / 16 / 20 / 25 / 30. Installation and operation instructions. Language: RU | pdf 2.76 Mb

Gas / liquid fuel boilers Kiturami STS series - 13 R, 17 R, 21 R, 25 R, 30 R stainless steel. User manual. Language: RU | pdf 2.77 Mb

Liquid fuel heating boilers Kiturami series KSO-50 R, KSO-70 R, KSO-100 R, KSO-150 R, KSO-200, KSO-300 R, KSO-400 R. Operating instructions. Language: RU | pdf 1.13 Mb

Liquid fuel heating boilers Kiturami series TURBO-9R, TURBO-13R, TURBO-17R, TURBO-21R, TURBO-30R. User manual. Language: RU | pdf 682.85 Kb

Liquid fuel heating boilers Kiturami series CTR 5000. Operating instructions. Language: RU | pdf 7.04 Mb

Diesel heating floor double-circuit coppers of Kiturami of the KSO series - 50/70/100/150/200/300/400. Instructions for installation, operation, service and repair. 2016 | Language: RU | pdf 4.79 Mb

Diesel heating floor double-circuit coppers of Kiturami of the KSO HI FIN - 50/70/100 series. Instructions for installation, operation, service and repair. 2016 | Language: RU | pdf 3.04 Mb

Diesel heating floor double-circuit coppers of Kiturami of the STSO series - 13/17/21/25/30. Instructions for installation, operation and service. 2016 | Language: RU | pdf 3.94 Mb

Diesel heating floor double-circuit coppers of Kiturami of the STSO HI FIN - 13/17/21/25/30 series. Instructions for installation, operation and service. 2016 | Language: RU | pdf 4.30 Mb

Diesel heating floor double-circuit coppers of Kiturami of the TURBO series - 13/17/21/30. Instructions for installation, operation and service. 2016 | Language: RU | pdf 3.93 Mb

Diesel heating floor double-circuit coppers of Kiturami of the TURBO HI FIN - 13/17/21/25/30 series. Instructions for installation, operation and service. 2016 | Language: RU | pdf 3.89 Mb

Combined heating boilers Kiturami series KRM - 30R, KRM - 70R on solid and liquid fuels. Instructions for installation and operation. Language: RU | pdf 921.12 Kb

Bifuel coppers of Kiturami of the KRH - 35A series (liquid fuel + wood fuel). Instructions for installation and operation. Language: RU | pdf 3.49 Mb

Connecting the diesel boiler Kiturami Turbo to the DHW system

Options for connecting a diesel boiler Kiturami Turbo to a hot water supply system

The heating boiler Kiturami Turbo 13/17 additionally provides hot water supply to the heated facility.

The hot water supply circuit of the boiler is connected to the hot water supply system of the building.

The further selection of hot water depends on the scheme for connecting the boiler circuit to the hot water supply of the building, the consumption of which is determined by the options for the desired consumption:

Option 1. For one-time domestic purposes, by simply opening a tap at a collapsible point when the unit is turned on and operating in heating mode.

Option 2. To ensure the required flow of hot water by changing the operating mode of the unit by pressing the "SHOWER" function button located on the room thermostat.

The Kiturami Turbo 13/17 boiler in the "SHOWER" functional mode provides hot water supply at any time of the year. During operation of the unit in the functional mode "SHOWER", the functional modes of the boiler for heating the building do not work.

If the need for hot water exceeds 1.5 hours, it is enough to extend this mode by pressing the "SHOWER" button again.

Variants I and II provide hot water extraction when the boiler is connected to the pipelines, the scheme of which is shown in the "Boiler piping" section of this passport.

Option 3. This option is a non-standard solution for providing the building with hot water (for example: several simultaneously operating water appliances, in an amount equal to the number of people living in the house; using a recirculation system; providing hot water around the clock, etc.).

Connection of the unit to the hot water supply of the building with a non-standard solution will be carried out by a separate project "Hot water supply of the building". In this project, it is necessary to justify the choice of the boiler according to its thermal power.

In option III, it is allowed to connect the boiler to pipelines with deviations from the scheme shown in the "Boiler pipe system" section of this passport, if the safe operation of the boiler is ensured.

When connecting diesel boilers Kiturami Turbo to the hot water supply system, it is necessary to use: data from the main characteristics of the boiler of this passport; the requirements of this section; building hot water project.

Fig.9.

Ensuring the preparation and selection of hot water:

The preparation of hot water is provided by the circuit of the unit. The cold water inlet to the boiler is made through hole 16 (see the inscription on the boiler body: "Hot water inlet"). The hot water outlet is made through hole 17 (see the inscription on the body: "Hot water outlet").

The process of hot water preparation in the unit is ensured by the transfer of heat by the heat carrier of the heating circuit to the circuit with a temperature increase At = from 25 to 40°C. The increase in water temperature in the boiler depends on the water flow (l/min) and on the cold water pressure in front of the boiler opening 16.

Preparation of hot water is provided at a temperature of the heat carrier from 80 °C to 85 °C.

The stability of water treatment by temperature depends on the presence or absence of natural circulation of the coolant in the heating system.

One of the options for blocking natural circulation when the diesel boiler Kiturami Turbo 13 is operating in hot water mode is described in the section of this passport.

Other technical solutions that ensure the stability of water preparation in terms of temperature are determined by the conditions set forth in the passport.

The selection of hot water depends on the height of the location and remoteness of the water fittings, the number of collapsible points simultaneously involved, on the hydraulic resistance of the pipeline, on the temperature and pressure of cold water at the inlet to the unit.

The maximum allowable working pressure for the DHW circuit, not more than 3.5 kg / cm2.

If the cold water line 19 provides water supply with a pressure of 3.5 kg / cm ″ and more, it is necessary to install a reducer 20. The cold water pressure regulation by the reducer 20 ensures the implementation of the recommendations set out in clause 2.5. of this subsection. Control of the pressure adjustment on the cold water supply is carried out with a pressure gauge 23 with a maximum pressure of not more than 10 kg / cm2.

It is not allowed to supply cold water to the unit at any set operating pressure, if there is a possibility of pressure surge in the pipeline, or the pressure on the cold water supply is of a severe variable nature.

The presence of thermal insulation on the main DHW pipes provides additional savings in fuel consumption.

Pipe connection method

Fig.4. Diagram for connecting Kiturami Turbo 17 boilers to a heating system with an open expansion tank (option 1)

1. boiler, 2. heating system, 3. hot water supply system, 4. open expansion tank, 5. cold water reserve tank, 6. heating supply pipeline, 7. V-shaped assembly, 8. collector on the supply pipeline, 9. collector on the return pipeline, 10. mesh filter (mud collector), 11. circulation pump, 12. heating return pipeline, 13. coolant drain pipe, 14. expansion pipe, 15. circulation pipe, 16. cold water inlet pipe, 17. hot water outlet pipe, 18. domestic cold water pipe, 19. cold water main

The scheme (see Option 1) is the basis for the implementation of a working project for connecting to the boiler: pipelines, main and auxiliary equipment, to ensure the safe operation of the unit in a heating system with an open-type expansion tank.

Fig.5. Scheme for connecting diesel boilers Kiturami Turbo to a heating system with a closed-type expansion tank (option 2)

The scheme (see Option 2) is the basis for the implementation of a detailed design for connecting to the unit: pipelines, main and auxiliary equipment, to ensure the safe operation of the boiler in a heating system with a closed-type expansion tank.

__________________________________________________________________________

_______________________________________________________________________________

__________________________________________________________________________

OPERATION AND REPAIR OF BOILERS

Proterm Panther Proterm Skat

Categories

Popular