Creating a panel is a hobby for novice designers. Panels on the wall: a modern take on a simple and stylish interior design Panel options

An apartment decorated with panels, paintings, hand-made embroideries becomes sweet and homely. You do not need to have an artistic education or the talent of an artist to create a fabric panel yourself.

Women have created such paintings since ancient times. Using the remnants of fabrics, skillful girlish hands created beautiful carpets, quilts, blankets, clothes. Fabrics were expensive, so the scraps after sewing clothes were not thrown away, but were used to create new things.

Needlewomen work in the technique of patchwork, quilt, kinusaig, appliqué. The highly artistic products created by them adorn the walls of apartments and are shown at exhibitions and fairs.

To create a fabric panel with your own hands, you need the following qualities:

perseverance;
accuracy;
patience;
the ability to get things done.

Every sewing lover has materials for making a wall panel with their own hands: trimmings, shreds, ribbons, ribbons. To create it on the wall, any materials are suitable: chintz, silk, linen.

Picture You can come up with your own or choose schemes in a magazine or the Internet. The background for it can be anything. More often they make fabric on fabric, then the finished panel is stretched onto cardboard or plywood. The picture can be framed with or without glass.

Shreds and scraps are sewn or glued.

Important! Glue must be of high quality, so that it sticks well and firmly, but does not leave marks.

A special master class will help beginners to quickly sew a textile product, for example, patchwork quilts or a blanket from the remnants of textiles.

It has become a trendy decor element. It can be bought in the store, at trade fairs. It is not difficult to make a woven panel with your own hands. Even if the first time not everything works out perfectly, your product will be unique and will suit your interior.

What do you need:

Instruction.

Take a rectangular sheet of thick cardboard 30x40cm.
Cut a piece of canvas or other heavy fabric 5-7 cm more on each side of the cardboard.
Glue the cut out fabric to the cardboard, wrapping the allowances on the back side, and glue it too. The base of the panel is ready.
On a gray or brown fabric, you can draw a hand in a soft dark stripe or with a different pattern. This will be the trunk of the tree.
Take scraps of fabric in colors that are suitable for the leaves of the tree. Draw on them about 70 leaves ranging in size from 4 to 2 cm. Cut them out and stick them on the base of the panel in the form of a dense crown of a tree.
Glue the previously cut tree trunk onto the panel. Attach some fallen leaves under the tree.
The master class is over. Do-it-yourself patchwork panel is ready.

You can see photos and pictures with finished panels in the gallery below.

Gallery: patchwork wall panel (25 photos)

Master class: do-it-yourself flower panel made of fabric

we make from bright multi-colored scraps. The background can be made from a piece of calico according to the color, like a clearing. The frame for it is chosen depending on the theme of the picture: oval, square, rectangular, round. For a round panel, wooden hoops are sometimes chosen. A chintz piece is stretched and glued onto cardboard or plywood of the desired size and shape.

Flowers are made in individual buds or using the appliqué technique.

For bulk panels multi-colored circles of different diameters are cut out, collected in a flower, starting from the largest diameter to the smallest. You can immediately cut the petals on round, oval or pointed circles. Then the flowers will look like dahlias, daisies or asters.

We glue stems for flowers in the form of a branch onto the background, its configuration depends on the shape of the background. Cut out leaves of arbitrary shape. We lay out the flowers and leaves on the panel so that we get a beautiful floral pattern. Then glue them to the background.

Can you make an application from several flower branches on a blue or green background.

The picture can be immediately hung on the wall, or you can insert it into a frame and then decorate the wall with a finished craft.

Fabric appliqué master class

The product can be embroidered on a piece of material without a cardboard backing. Transfer the selected pattern to the fabric, insert it into the hoop, embroider with any thread using any technique. Wrap the excess pieces of fabric on the back of the hoop, cut off and sew or glue the remaining ends on the inside of the needlework.

Cut out a piece of fabric in any shape you like. It is more convenient to make a rectangular or square picture. Draw or copy the selected pattern. According to the drawing, we make an application from scraps of fabric. They can be sewn on a sewing machine with an overlock stitch. When the drawing is ready, around the perimeter we sheathe the background with a strip of fabric of a contrasting color 3-4 cm wide. The seam connecting the frame and the background can be sewn up with a ribbon or ribbon to match the needlework.

Such a panel can be hung on the wall, having previously sewn loops of frame fabric at the top and hang the craft on the wall for them.

Do-it-yourself wall panel in the kinusaiga technique

This type of needlework was invented by the Japanese. Its peculiarity is that crafts are made of fabric without a needle on foam. To master this method of creating a panel, you need to start with the simplest drawings with large details. Masters in Japan create not only paintings, but also toys using this technique.

Master class for creating panels using the kinusaiga technique

Required materials and tools:

Step-by-step instruction.

Copy the drawing onto a sheet of paper, cut out its details. Using these details, make fabric parts with 1 cm allowances.
Glue the foam sheet to the cardboard. Put paper with a pattern on it, scratch it onto the foam with a knife.
On the first fabric blank, apply a little glue on the reverse side, attach it to the foam and tuck the fabric into the foam slot with a nail file. You can use another tool, thin enough and sand the blade until smooth.
We glue all the cut fabric pieces and carefully tuck the fabric into the slots. We straighten the shreds and press them so that there are no wrinkles and bubbles.
When the drawing is ready, we cut out a frame for the panel from the ceiling plinth. We put the finished product with cardboard on a large piece of fabric. We lay out a frame on the picture, put the fabric on the sides of the frame, fill it under the plinth and glue it.
Panel in the style of kinusaiga is ready. Make a loop, glue crafts on the back and hang on the wall.

Master class completed. Now that you have mastered a simple drawing, you can move on to more complex ones. Panels on the wall using the kinusaiga technique look colorful on the wall and decorate the look of the room. For a children's room, you need to choose drawings that are interesting to children from cartoons and fairy tales.

Wall decor with fabric panels and note boards

A decorative fabric panel can be made in many ways:

The decorative panel is good for living room, bedroom. In the office, nursery, hallway, do-it-yourself note boards are often installed. You need to think about the shape, color, material for making crafts. It is important that it is in harmony with all the decor elements of these rooms. The note board should be bright and visible, it is a helper for all family members. Notes can be fastened with pins or small carnations, their color should match the color of the board. The fabric for it can be the same as upholstery, or to match the wallpaper on the wall.

Panel of felt and burlap

In the manufacture of decorative fabric panels you can use felt. It is easier and faster to work with than with fabric. He does not shaggy, does not get enough sleep, keeps his shape well, sticks and sews. A felt panel can be made entirely of felt, both the background and the pattern. In such cases, a wooden hoop is used for the frame; felt panels can be made without a substrate and a frame.

It can be combined with any fabric: chintz, velvet, silk, burlap. Often burlap is used for the background.

What you need to make:

picture;
cardboard;
pencil;
scissors;
felt;
glue;
the basis.

How to make a felt wall panel: prepare a base from any material: cardboard, thick felt, burlap. Make templates for figures and panel details according to the drawing. Using them, cut out figures, details from felt.

Arrange on the base in the desired order, as in the figure, all the cut out elements.

If you like the location, glue all the details to the base.

If burlap was chosen for the background, then the frame must be decorated with ribbons, ribbons, colored buttons.

Panels made of felt are made for a children's room. Drawings are selected from coloring pages, illustrations for fairy tales. Often felt panels are made in a round shape, like a wreath, decorated with figures of animals, birds, flowers. Then, in felt letters, make up the name of the child. When such a fun craft is ready, they decorate the door to the children's room with it.

Burlap can be used in the manufacture of flower panels from fabric and yarn. For him, you can take the old frame from the mirror, photo; you can make a new frame. We wrap the frame with burlap, fixing its excess on the reverse side.

We make a pattern from the remnants of yarn, you can take yarn that has already been knitted and dissolved. Threads can be woolen, acrylic, floss. We draw up on paper a diagram of the arrangement of flowers, leaves, grass. Flowers can be made in any simple way from bright silk shreds. First, we cut and glue grass and flower stalks from threads of different thicknesses of a suitable color, guided by the diagram. For leaflets, we glue the yarn in several rows, imitating the shape of a leaf. Flowers can be prepared ahead of time.

Each of us wants to live in a comfortable, cozy home that would not strain or overload with its appearance. Often, a new worthy repair is already bored, it is not possible to make updates, but you want to breathe a new breath of air into your home.

It is in these cases that a decorative panel placed on the wall surface can decorate and refresh the interior without much hassle and alterations.

The panel can be placed in any room from the hallway to the bathroom. Each specific room has its own selection criteria and features of such wall decorations.

There are several characteristics that distinguish wall products from each other:

the material from which the thing is made. It can be a product made of wood, plastic, mirror surface, cardboard and others. Such paintings are decorated with buttons, and dry plants, and small mosaics, etc.;
manufacturing technique - it can be in the form of knitting, weaving, embroidery, carving, inlay, etc .;
form - here production is not limited by any framework. Products can have completely different sizes and shapes. These are ovals and polygons, and models consisting of several elements stand out;
3D effects, which are at the peak of popularity today. The effect of volume is then created by voluminous paper applications, ledges. Similar products imitate carved and bas-relief surfaces.

Wall products have two functions. The first and most important is the decorative effect of use. The panel is a full-fledged independent element of room decoration.

The second equally important function is to hide existing flaws in the form of bumps or cracks. It is also possible to hide the safe under the panel.

Varieties of wall panels

There are several types of panels that can be made from a variety of materials and in various techniques.

Textile products - this type is made of fabric using the embroidery technique. Most often, a wooden canvas is taken as the basis. Embroidery can take the form of picture compositions, ornaments, appliqués. As a rule, such panels are made on an industrial scale, however, there are also manual copies, the cost of which is much higher.

Wooden products (carving, burning), the cost of which is high, and the appearance is quite premium.

Panels made from wallpaper fragments look very original. In addition, it is possible to make such a panel with your own hands.

Freesize type, the main difference of which is their free size and the ability to add other elements to the composition. An example is modular compositions with different images.

Mirror panels, for the creation of which they use both standard mirror surfaces and elements of unusual shapes, wavy and uneven mirrors.

Panel placements

In any living space there are many wall surfaces on which it is possible to place decor panels. The main condition is that the product is in harmony with the functionality of the room and its style.

Hallway

It is from the hallway that any apartment begins. Therefore, it is advisable to place a pleasant wall composition here that will meet all those who come. When choosing a suitable product, you should consider the size of the room.

For small spaces, it is better to choose small panels with a non-aggressive image in soothing colors. The best options would be images of flowers, natural paintings.

corridor passage

If the corridor is not equipped with light sources, then the panel can be chosen brighter by supplementing it with a wall lamp. If the corridor is small, then a few compositions on the wall will be enough.

But a spacious room should be equipped with a number of panels. An excellent option would be a composition related to one theme, for example, four products that reflect the change of seasons.

kitchen area

The kitchen is often decorated in light warm colors, but the panel should be bright, gathering all the attention. A composition with a still life or coffee bean products that fit the theme will perfectly fit into the atmosphere.

Living room

The main purpose of the living room is rest and relaxation. Based on this, decorative panels on the walls also have a peaceful look. The color palette of products is calm, images in the form of landscapes.

In spacious living rooms, the composition is recommended to be placed along the entire length of the wall surface; it can consist of several elements interconnected by a single plot. An excellent option would be a large ship plowing the sea surface, which is embroidered on a fabric.

Another composition is a world map applied on a wooden base consisting of several blocks. Lighting should be added to such a composition, and then the backlit wood panel will become the main focus of the entire interior.

sleeping area

The bedroom is the room where you fall asleep and wake up. Decorative panels here should serve as a means of appeasement in the evening and a source of awakening in the morning.

It is better to place images of nature in front of the bed, as in the photo panel in the bedroom on the wall. Pictures with space views look quite original.

In the children's bedroom, you can create a wall decor composition on your own, involving the kids themselves in the joint creativity.

bathroom

Making a panel in the bathroom, you should pay attention not only to the external characteristics of the composition, but also to its performance. Wood products immediately fall off, because due to high humidity they will quickly become unusable.

The most suitable option is products from marble elements. Attached to a special solution, such compositions are not afraid of moisture and temperature changes. Thanks to a large selection of wall decor compositions, it is possible to choose the right option for any room and style direction.

Photo panel on the wall

Every home owner tries to make living in it more comfortable. To achieve this goal, the premises are decorated with high-quality modern wallpaper, stucco, walls, floors and ceilings are lined with various materials. And today there are a huge amount of these materials.

A panel of colored paper can be an excellent backdrop for photos during a party, its production requires a minimum investment of time, effort and money.

One of the most common ways to improve a home is to decorate walls and ceilings, and sometimes floors, with various do-it-yourself panels.

Panels are often used to decorate ceilings and walls in the bathroom. To do this, it is enough to buy a special tile, which, when properly laid, gives an image, and decorate the ceiling with stretch material with a colorful pattern. But you can make an original panel with your own hands with the help of your children and grandchildren. The joint work of adults and children will always benefit. How to make a panel with your own hands? Let's start looking at the various options, starting with the simplest.

Making panels from buttons

A do-it-yourself panel can be made from ordinary buttons. Almost every family will find a box or box with these things that have served their time or are waiting in line. It is a pity to throw them away, and it is far from always possible to find a real application. It is from them that you can try to make a panel with your children, which will find its place on the wall. To work, you need to prepare:

A fabric panel is very easy to make, for this you need different fabrics.

multi-colored buttons of different sizes and shapes;
beads, beads, rhinestones and other trifles of this kind;
a base made of thick cardboard, felt, a sheet of velvet paper;
marking pencil;
glue or glue gun;
tweezers with a needle;
several toothpicks;
frame to accommodate the finished panel.

Production begins with the choice of plot. For a children's room, this can be an image of a chicken, a bunny, a tree, a butterfly, a fairy-tale character. It also depends on the colors of the buttons. For the crown and trunk of the tree, you will need a lot of green and brown buttons. For a chicken, yellow is the most suitable color.

The contours of the plot you like are applied to paper, cut out and fixed on the base. Inside the contour, first, without glue, buttons, beads, beads are laid out. Children will be happy to help adults in this activity. Having chosen the final version of the composition, the fixing of the details begins. A drop of glue is applied to each of them, the part is glued into place. First, it is recommended to glue large buttons, then small beads and beads are fixed along the contour. Glue on small parts is applied with a toothpick. It is convenient to lay them in place with tweezers.

After the glue is completely dry, the finished image is inserted into the frame. The finished panel can decorate the jewelry box, it can be hung on the wall, as a gift to someone. In such a simple way, the simplest, but rather original panel is made, which can become a real work of art. In a similar way, you can create panels of any size and plot by gluing the details on the base, which can be a wall or any other surface.

Panel of coffee beans

Original panels are obtained from coffee beans. Of these, you can lay out a large-sized picture that can decorate a room and fill it with a unique coffee aroma. Materials for work:

A shell panel is suitable for those who like to relax by the sea. If you hang it in the bedroom, it will remind you of a wonderful vacation on the coast.

coffee beans, some of which can be roasted, some remain green;
natural ground coffee;
plastic empty bottle;
scotch;
scissors;
cardboard about 2 mm thick;
PVA glue;
glue brush.

Manufacturing process:

from an empty plastic bottle you need to cut off the top;
separate the place where the cork is twisted;
cut the resulting part in half lengthwise. The result should be blanks that resemble halves of a coffee cup;
the bottom and back of the half-cup are cut out of cardboard;
all parts are glued together;
wrap the resulting product with tape to protect the plastic from deformation;
apply a layer of PVA on the surface wrapped with adhesive tape, sprinkle with ground coffee;
cut out a piece of cardboard that resembles a saucer;
paste over it with ground coffee;
when the glue dries, glue the cup with coffee beans. Work starts from the edges. The result should be a beautiful cup;
the saucer is finished in the same way;
it remains to glue the main details to the base and decorate with additional decorative elements in the form of spices, ribbons, threads and other materials.

The original small panel with a pleasant aroma is ready.

Colored paper panel

An original panel that can serve as a background for decorating a room on the day of a family celebration is easy and simple to make from paper of different colors. Its dimensions are not limited by anything. Children are also happy to take part in this work. For manufacturing you will need:

To make a panel of corks, you need corks of different sizes and shades.

paper of different colors;
paper clips;
stapler;
scotch.

Sequencing:

a sheet of paper of any color must be folded with an accordion and bent in half to make it look like a fan;
inner faces can be connected with a stapler;
make many similar figures of different colors and sizes;
assemble a circle from several figures;
finished circles are attached to the base, which may be a wall. Panel for placing jewelry, photographs and other decorative elements, ready.

Panels from various fabrics

Fabric panels in apartments and houses have been used for a long time. It is very easy to make it. You need to prepare a fabric that is suitable in color and texture, several flat pieces of foam of the correct shape and double-sided tape. You will also need sharp scissors. Adhesive tape is glued to the foam base from its back side. The fabric is stretched to remove wrinkles and glued to the tape. It turned out a very light panel that can be attached to the wall with putty. You can attach photographs, artificial and dried flowers to the panel, or leave everything intact.

Panel of wine corks

Such a panel looks unusual, it is not very easy to make it, because it is difficult to collect the required number of traffic jams. Friends and relatives should help with their collection. It is good if the corks are of different sizes and shades. For work you will need:

plywood sheet for the base;
mastic;
liquid Nails.

Liquid nails are applied in stripes to the base. Corks are randomly glued to plywood. When the entire surface is covered with corks, they are covered with mastic. You can use varnish instead of mastic. The panel is ready.

Panel with 3D effect

Nail panels are often used to decorate ceilings and walls in the bathroom.

Such a product can be made from 2 identical postcards or paintings. Consider the manufacturing process on the example of postcards. Children can take part in the process of making panels with their own hands. The finished product decorates the interior of the room, you can make a gift to someone by choosing the desired plot of the image. Children in the course of the work will consolidate their skills in handling a ruler, scissors and glue. Materials required for work:

2 images on postcards (they must be exactly the same);
white cardboard for the base;
frame in which the finished work will be inserted;
ruler and pencil for marking (it is good to use a portable T-square);
scissors for cutting postcards;
PVA glue.

Time to get to work:

The postcard is turned upside down on the table and marked into strips. Do the same with the other postcard. The width of the strips is 5 mm.
The strips must be numbered, starting from the right edge of the postcard.
Postcards are cut with scissors according to the markup. The strips of each postcard are laid out in different piles.
Strips are glued onto the base of white cardboard in numerical order. First, strips with numbers 1 and 1 are glued, then 2 and 2, 3 and 3, and so on until the end. Start gluing from the left edge of the base. The top and bottom edges are carefully aligned.
Excess cardboard is cut off.
The work is framed. The panel is ready. It can be placed on a shelf or hung on a wall.

In this technique, you can perform other work using a variety of materials.

Cute panel clock and hieroglyphs

From 13 small frames of approximately the same size, an original wall clock is obtained. Various applications are inserted into 12 frames, in the last one - a clockwork from an ordinary Chinese watch. Instead of arrows, you can attach plastic tablespoons or forks, cocktail straws, and other items. 12 frames are placed on the wall in a circle, a frame with a clockwork - in the center of this circle. The panel clock is ready.

Hieroglyphs attract happiness and good luck to the house. So say the Chinese sages. You need to take a bamboo stick and cut it into 4 pieces. From them, tie a frame into which to stretch a dense piece of fabric. The fabric can be replaced with leather, cardboard, other material. Draw a hieroglyph and hang it on the wall. The outlines of the hieroglyph can be embroidered, pasted from improvised materials.

Wallpaper wall panel

To make such a panel with your own hands, you need some skills in working with a baguette. The following tools and materials are needed:

wall baguette for the frame;
sharp knife for cutting a baguette;
level for precise construction of a rectangle;
marker for marking;
a ruler for drawing vertical and horizontal marking lines;
miter box for sawing a baguette at an angle of 45 degrees;
hacksaw with fine teeth.

Completing of the work:

On the wall, mark and draw a rectangle of the intended size.
According to the markup, stick a baguette cut to size in the form of a frame. You can glue it with special glue, which is selected depending on the material of the baguette. Styrofoam and polyurethane foam baguette can be glued using finishing putty.
Excess glue is removed with a damp brush.
The frame is painted with moisture resistant paint of any color.
Wallpaper is glued inside the frame. First you need to form a bend by pressing a plastic spatula into the corner formed by the frame and the wall. Then the panel of the desired size is completely cut out and glued into place.
Decorate the whole composition with a sconce or other lighting device.

Eggshell panel

Egg shells are suitable for making panels. For example, consider a fairly simple option:

Making panels from buttons begins with choosing a plot. For a children's room, this can be an image of a butterfly, a chicken, a tree, a fairy-tale character, a bunny.

You need to take the base in the form of a plastic plate or tray and carefully sand it.
Wipe the surface and cover it with acrylic paint.
The contours of the drawing are transferred to tracing paper with a simple pencil.
The reverse side of the tracing paper is smeared with a layer of soap and superimposed on the base with the soapy side down.
The contour of the image is outlined in pencil, which, after removing the tracing paper, will be printed on the plate.
The contour on the base is outlined with a marker.
The eggshell is soaked in a container with cold water, freed from the inner film and dried.
The shell is painted in the desired color with acrylic paints.
Suitable pieces of shell are glued along the contour of the pattern with PVA glue. It is even better to use Holzlime glue. After pasting the contour, they begin to paste over the space inside it.
The finished panel can be coated with a glossy automotive varnish and dried well. You will get something like the following.

Any panel on the wall is not always a picture, but it can already hide some wall defects and transforms the appearance of the room. A wide variety of materials are used to make panels with their own hands: beads, buttons, iron shavings, mosaics and rhinestones, paper, glass, fragments of ceramic tiles, fabric, paints and much more. Original panels can be made from sea shells, which will remind you of a vacation at sea. There are many options. Non-existent, you can come up with and bring the idea to life on your own.

A beautifully made photo panel is a stylish decoration for a living room, hallway or bedroom. In order to form an extraordinary composition, it is necessary to take into account the proportions of the room, the degree of its illumination and the prevailing color scheme. It will not be superfluous to take into account the functional purpose of the room. If calmer motifs are suitable for the bedroom, then something more energetic is appropriate for the living room.

The success of the whole composition is given by the right choice of frame color. If the room is made in the modern direction, then in this case you can experiment with different colors. In this case, the frame should not be too "flashy". To a lesser extent, experiments are allowed when it comes to country direction.

It is also important to choose the right frame for the wall in relation to the size of the photos. You can often hear that a full-fledged panel cannot be created. Too small images are to blame. A little trick will help you get out of the situation. First you need to insert small images into the passe-partout and only then into the frame.

In this case, it is necessary to remember the correct combination of colors:

The colored frame is necessarily complemented by a colored passe-partout;
The prevailing blue color will help to recreate the atmosphere of antiquity;
The feeling of vintage style will be conveyed by a black and white combination.

Making a stylish panel from a photo: size matters

After a stylistically justified color has been chosen, it is necessary to pay attention to the size of the entire composition. Vintage aficionados who want to recreate the classic style indoors should opt for a large baguette frame. On the one hand, it will become one of the visual accents in the room. On the other hand, it will emphasize the majesty of the interior.

If the use of photo frames is planned in a private house where there are several floors, it is advisable to use frames of various sizes.

The next idea looks great. Many large frames are installed at the top of the flight of stairs, and as you descend, the number and size decreases. The result is a beautiful visual effect.

In addition, the following recommendations will help to make a unique design:

In the children's room, it is necessary to abandon too small frames in favor of medium and large ones.
The living room is a place where a noticeable visual accent is required, so attention should be focused on 3-4 large photo frames.
A proportionate fixation system will save you from many problems. That is why it is recommended to use clips in the case of small frames.

Rules for selecting photos for panels: stylistic combinations

The main secret of a beautiful wall with photographs is the harmonious combination of the picture, the size of the frame and its color. Today it is not difficult to find recommendations related to the need for bold experiments. It is proposed to use square, round and rectangular frames in one composition. It must be remembered that the forms must be harmoniously combined.

Regardless of the size of the frame, each experimental composition should not include more than 5-7 images.

Otherwise, the space will look overloaded. A practical tip for those who do not want to spend time changing the shape of the frames is the recommendation to purchase a universal option. Without loss of properties, it can be turned at least every day.

In addition to the above, designers highlight a number of other tips:

The use of wooden frames in a dark or light tone is justified in a classic style or Provence direction;
The image of people must be "diluted" with pictures of nature;
Family photos look good in the living room on the wall with photo printing, and something lyrical in the bedroom;
Images mounted on the wall on special shelves look creative;
If we talk about the form, then the fishnet ones look good in the girl's room. Often they are complemented by something white or cream.

Unusual ideas for photo panels

In the store, you need to purchase several wooden frames without any decorative elements. In addition, you will need small shells. If there are none at home, then it is not difficult to purchase them in a souvenir shop. In this case, you do not need to use shells heavily, otherwise the frame will turn out to be too overloaded composition.

When choosing creative solutions, it is necessary to build on hobbies and hobbies. For example, fans of travel can turn their attention to the marine theme.

In addition to the marine theme, you can use a number of other ideas:

Take some yarn, the color of which is close to pastel. After that, it must be used to tie a baguette. If desired, if it fits into the creative concept.
Do-it-yourself macrame will become an unusual main frame for the frame.
A bold enough experiment would be to place photos on a carved wooden flat surface.
Good advice for those who do not plan to spoil the wall with nail marks would be to purchase a vinyl film. Thanks to its ability to be fixed on a vertical surface, it allows you to fix many photos in random order. At the same time, you need to remember that simply peeling off the pictures from the wall will not work. That is why you need to think about everything in advance.

Creating a photographic panel indoors does not require much time and effort. The main thing is to think over everything in advance. Depending on the color and stylistic solution in the room, the tone of the frames and the photographs themselves are selected. After that, the entire composition must be correctly positioned.

Panel on the wall from photographs (video)

Regardless of the number and tone of the photographs, they must be properly positioned. The upper part of the panel is always made lighter, and then the whole composition changes to tone towards darkening.

Examples of panels from photographs (photo in the interior)

Panels on the wall, their types and placement, preparation of the basis of the composition, the technique of its manufacture from various materials.

The main types of panels on the wall

Wall panels can vary in many ways:

Anything can serve as a material: plastic and fabric, wood and cardboard, paper, wire and fur, postcards and photographs, buttons and yarn, mirror fragments and mosaics, branches, dry leaves and more.
A performance technique using knitting, embossing, embroidery, woodcarving, gluing and inlay. At the same time, a decorative element can be an interweaving of lines and geometric shapes, an abstract image, or have a specific plot.
A shape that can be of any size and geometry. Decorative wall panels are made in the form of ovals, polygons, curvilinear figures and often consist of several separate elements. Depending on the size of the picture, they can serve as the main accent of the interior or its decoration.
The 3D effect, which is a new trend of the times in creating such compositions. It is difficult to make such a panel, but it is quite real. The three-dimensional effect in this case is achieved with the help of voluminous paper applications, various projections, etc. Applications can imitate bas-relief, high relief and unique carvings. Beautifully look "soft" three-dimensional panels with a pattern created using small wallpaper nails, equipped with decorative caps.
Lighting, which makes the panel not only an element of decor, but also gives it practical properties. LED lighting allows, for example, to use the panel as a night light. Lighting level can be adjusted by the number of LED elements.

Before you make a panel on the wall with your own hands, you should think about its location. The color scheme, size and shape of the future canvas depend on this. The distance from the floor surface to the panel is usually 170 cm.

If you plan to make a mirror panel, it should be installed so that artificial or natural light falls on the surface of the picture. At the same time, reflected and diffused light will create visual harmony in the room.

Wall panels made of cardboard, cork and other improvised materials look great in free space. Therefore, it is not recommended to place such decor near other interior items, for example, shelves, photographs and paintings.

Preparatory work before making a wall panel

There are many options for making decorative panels on the walls of any room. Photos of finished products can be found in catalogs or you can develop your own project. To begin with, you can try to put the planned panel drawing on a sheet of paper. Having such a sketch, it will be easier to determine the future dimensions of the picture and the materials needed to create it.

If fabric is used as a decor, you can take a piece of plastic, a board, or any material that has a hard surface as a base. You need to stretch the fabric on the base, and fix its allowances on the back of the workpiece. The finished craft is installed in a frame, and then on the wall.

The fabric can also be stretched directly onto the frame, and the surface can be decorated with glued pieces of cork, coins or decorative paper elements.

Panels can be made without a frame. This will require a piece of drywall or plywood. The front part of the workpiece must be pasted over with foam rubber or padding polyester, and then the resulting “pillow” should be covered with a cloth. After that, the product can be decorated.

How to make a wall panel with your own hands

Below we will consider the process of making the most popular panels from various materials.

Wall panel of colored buttons

Each house probably has a jar or box, in which buttons of different colors were put for several years: small and large, with holes or bows. If there are too many of them, a panel of such elements can easily decorate a wall that is familiar to the eye.

To make it, you will need a base, which can be a board, cardboard or fabric stretched over a frame, glue, carbon paper, buttons, a pencil, a selected drawing or your own imagination.

An original solution may be to create a “money tree” panel on the wall with your own hands: it is believed that it should bring prosperity to the house. Of course, it is better to make it from coins, but they are not green. Therefore, colored buttons for such a panel would be quite appropriate, especially since no one forbids arranging them in the same pattern with coins.

You can make such a panel like this:

A drawing of a tree with a powerful trunk and a lush crown should be applied to the base.
Choose brown and green buttons of various sizes and shades.
The necessary places of the base must be smeared with glue and alternately stick buttons on them. Pasting should begin with a tree trunk, as it will be partially hidden under the crown. Buttons that imitate leaves must be glued, leading them to the trunk - the green "foliage" should hang down.

In the autumn version of the "money tree" you can additionally use red and yellow buttons. In this case, their arrangement with coins would be appropriate: their silver color can create a background of fallen frost, and yellow can decorate the crown.

Dough wall panel

A suitable material for making panels is salt dough. It is well kneaded and lends itself to modeling. Unlike plasticine, dough can be dried to a firm and durable state. And if after that the stucco is varnished, it can be stored for centuries.

To prepare salty dough, you will need two cups of flour, a glass of fine salt, 125 ml of water and a tablespoon of dry wallpaper glue or skin care cream. Instead of the last two components, unrefined vegetable oil is often used.

High-quality dough should be elastic and dense, knead well and not stick to your hands. Its viscosity is adjusted by adding flour, and its stickiness is adjusted by oil. Dough can be colored with food coloring and flavored with turmeric, cinnamon, nutmeg, and other spices.

The panel is made in the following order:

From the prepared dough, you should mold a picture or make separate fragments for it in the form of figures, which can then be assembled into a single composition. Its themes and details depend only on the imagination of the performer and his artistic taste.
After completing the modeling, the panel must be sent for drying for an hour in the oven, the temperature of which should not exceed 80 degrees. Instead of an oven, you can use the heat of heating radiators, but in this case, the process will drag on for five days or more.
The dried panel can be painted with watercolor, gouache or acrylic enamel. An additional layer of varnish applied to the surface of the painting will make it durable.

Wall panel made of nails and threads

Using ordinary threads and nails allows you to create truly amazing paintings for wall panels. For work, you will need a board that will serve as the basis of the composition, a lot of small nails, scissors and a hammer, adhesive tape, multi-colored threads and a pattern stencil that can be printed by finding it on the Internet.

The production of panels from nails and threads is carried out in the following sequence:

First of all, you should cut out the stencil and fix it motionlessly on the board with adhesive tape.
Then, along the contour of the drawing and its parts, you need to stuff the carnations, duplicating them with the location of the stencil part. At the same time, the meaning of the drawing should be clear even if, after stuffing, the stencil is completely removed from the board. Its detailed outline with nails will help not to get confused in the future when highlighting fragments of the picture by wrapping threads of a certain color.
After driving in the last nail, the stencil can be removed and work with yarn can begin. To do this, the end of the thread must be fixed on one of the carnations and the yarn must be wound on a specific area: for example, on a flower petal. The specific order in this work is not important. The main thing is to observe uniform winding of threads everywhere.
In a similar way, each individual fragment of the pattern should be “painted over” with yarn.

Tile wall panel

Wall decor can be made from fragments of any tile: tiles, mosaics, mirror products and others. To work on the panel, you will need: a base for sticking the material, pieces of different tiles, glue and additional decorative elements - corks, pebbles, beads, etc.

Further actions are performed in this order:

It is necessary to pick up whole tiles of different types and additional decor. The tile into the desired fragments can be cut with a “grinder” or a tile cutter.
The surface of the base of the future panel should be cleaned. It can be plywood, board or part of a drywall sheet.
After cleaning or washing, the base surface must dry.
Using transparent glue, the main fragments of the panel should be fixed on the basis. For the main layer of the coating, you need to use neutral shades of tiles to highlight the sophistication of the rest of the fragments of the tiled panel.
Making a preliminary sketch can simplify the work. To do this, lay out all the decorative elements and mark them. After that, it will be possible to understand where and in what order each piece of tile should be glued.
The composition can be additionally diversified with small details: shells, beads, pebbles that can be found at home or bought.
After laying the tiles, grout the joints. The space between the elements of the panel must be filled with a special mastic using a rubber spatula. After that, the excess mastic must be carefully removed with a damp sponge and allowed to dry.

Wall photopanel

A unique author's decor can be obtained on the wall using photographs from a personal archive. When choosing them, it must be remembered that the photopanel should evoke only positive emotions. Therefore, it is not recommended to use photos depicting dead people or lost pets, which in the future will cause a constant feeling of depression. Much more appropriate in the panel will look like materials from the places of rest where you managed to visit, or pictures with a beautiful landscape.

It is not difficult to make panels from photographs. To do this, you need to buy a large glazed frame and fill it with memorable fragments from life. However, it will be even better to create a unique photo panel with an openwork pattern. For this, a special quilling technique is used (from the word quill "bird feather" in English), which does not require special expenses.

To work according to this technique, you will need: cardboard, scissors, five wooden slats, a can of white paint, PVA glue and four photo frames.

Using wooden slats, you need to make a frame, and then stick frames on it. After that, a pattern should be laid out between the frames, consisting of strips of paper twisted using the quilling technique. After finishing the design of the panel, its supporting structure should be painted from a spray can.

Mirror panel on the wall

To make a mirror panel, you need to go through several stages of work:

Create a sketch with the required dimensions.
Cut out the elements of the future panel from the mirror sheet and number them.
The edges of the parts should be processed and laid in the right order on the plywood sheet.
When creating a composition from fragments, its details should be glued on “liquid” nails.
The mirror panel can be decorated with small mosaics laid in the form of a rectangle or rhombus.

When installing the panel, you should follow some rules:

The surface for attaching a mirror composition to it must be perfectly smooth, otherwise the images may be distorted.
The side edges of the picture should not coincide with the lines of the outer corners - a baguette or border should be provided.
The boundary lines of the panel can be anything: straight, inclined, vertical, horizontal and round.

Bamboo wall panel

To make a bamboo panel, you just need to stick a plant on the wall in a horizontal, vertical or diagonal direction. In this way, you can decorate the head of the bed, allocate space for household appliances or lay out a winter garden in the living room. In addition, bamboo trunks often divide rooms, forming decorative columns, bar counters or partitions.

When making a bamboo panel in a wall niche, a number of requirements must be observed:

The composition should not be placed near heating appliances.
A certain humidity must be maintained in the room.
To ventilate the plant from the inside, a small two-millimeter hole must be made in each vertebra of its trunk.
Bamboo needs to be varnished in several layers.

Stone wall panel

To make a wall panel with your own hands, you can use natural stone. It can be granite or marble, although this mineral is fragile. Elements for panels are usually cut out according to a template. They are glued to a prepared polymer base or installed directly on the wall. The stone mosaic looks great.

Ceramic granite is suitable for wall panels. The composition is made using a small tile with a smooth surface and a side size of 1-2 cm. Rough tiles are usually used when installing floor panels.

Newspaper wall panel

Such a panel looks quite creative, especially since everyone can find the material for its manufacture. For work you will need newspapers or magazines, paint, scissors, glue and a clerical knife.

Further instructions are:

Newspapers need to be cut into sheets.
The resulting paper blanks should be twisted into tubes, fastening each of them with glue.
Tubes must be painted in different colors.
Alternating the multi-colored elements of the future panel, they need to be laid in a circle.
There should be a lot of circles of different sizes.
Then it is worth sewing a strong twine made circles with each other.
Ready-made panels can decorate the walls.

In this way, you can make very different panels that look unusual, and it is almost impossible to guess that they are made from an ordinary newspaper.

Watch the wall panel video:

We hope you figured out how to make a panel on the wall. Such work gives unimaginable scope for creativity. You can create any author's decor and decorate the room with your masterpiece. For many, this activity has become not only a pleasure, but also a permanent hobby. Good luck!

Categories

Popular