Ways to finish window slopes with your own hands. How to do the interior decoration of windows on your own Finishing the slopes of plastic windows inside with plastic

Today, window replacement has become very common. Old frames are still being actively replaced with modern analogues made of plastic, metal and wood. The installation process itself takes place quite quickly, which cannot be said about window decoration from the outside, since a number of technological requirements are imposed on this procedure, and from an aesthetic point of view, the owner should be satisfied. In the article, we will analyze various ways to create beautiful and reliable slopes and frames, focusing on materials and how to install them.

So, why is it worth paying close attention to the correct finishing of windows from the outside. The first thing that comes to mind is the neat appearance of the building. Without quality framing, you can't expect your home to look neat. Slopes and architraves are actively used in shaping the style of the building, its design, but not only. In many ways, they directly affect the comfort of people staying inside the building:

1. The technology for installing window frames requires leaving a technological gap, that is, they are never placed close to the walls. The resulting gaps are necessary to compensate for the movement of the structure as a result of shrinkage and even seismic activity, as well as the window system itself during temperature effects. If this technology requirement is violated, any changes would lead to deformation of the frames, due to which the windows would stop opening, and, possibly, the glass would be squeezed out.

2. The technological gaps left are direct ways of heat exchange between the room and the street, so they must be insulated. Previously, tow, wool, felt were used for these purposes, now it is mainly polyurethane foam or mineral wool.

3. All of these types of materials quickly become unusable if they come into contact with the atmosphere, moisture, wind, ultraviolet rays, which is why they need reliable protection.

As protection, a coating of materials that are immune to the above factors is used. At the same time, they must have sufficient attractiveness and be correlated with the systems with which the facade of the building is finished. In other words, the material of the slopes must be externally and technically combined with the material of the walls.

Slopes of plaster type

Windows can be related to the plane of the walls in different ways - either they are recessed inward and there are perpendicular slopes, or they are set in one plane. In the second case, only an overhead casing is required to protect the insulation, however, such a solution is implemented, basically, only during the construction of a new house, or the old windows were installed in the same way. Making a platband is much easier than a slope.

So, the first on our list will be plaster slopes. They can rightfully be called the classic version.

For such slopes, a sand-cement mixture is used, from which the outline of the window opening is completely formed. Today, this method is not as popular as it used to be, but many still consider it the most reliable and durable solution.

They are used in the event that the walls of the facade of the building are either completely plastered, or an architectural element is formed from the solution, which will externally be in harmony with the material of the walls.

The advantages of such slopes are the availability of materials and a fairly simple manufacturing technology, such a finish is weather resistant, looks simple but neat.

An experienced craftsman will make a quality slope within a few hours, if we are talking about a simple rectangular shape. Complex compositions with non-standard geometry can be very time consuming. It is almost impossible to do this yourself without experience and templates.

Cement plaster requires a certain time to dry, which will not allow you to immediately decorate the building. It is also worth considering that such work is dirty, so you should be careful.

Interesting to know! For work, you can use any plaster mixture, including decorative ones, for example, bark beetle. It all depends on the design approach.

Prices for various types of decorative plaster

Decorative plaster

How to make a plaster slope

Now let's look at what is required for such work, and in what sequence it is performed. We prepare the following tool:

1. Container for mixing plaster mixture.
2. Electric kneading tool - mixer, electric drill, perforator.
3. A set of spatulas for applying the mixture, an angle trowel, as well as a trowel for applying plaster.
4. Tools for removing the evenness of the slope - a plumb line, a bubble building level, a laser axis builder.
5. Wide brush with soft bristles.
6. Plaster grater.

From the materials we acquire the following:

1. Ready dry plaster mix or cement with sand, if you decide to save some money. The slopes do not take a lot of material, so it is better to buy it ready-made, since the factory composition contains plasticizers in the right proportions, which adds elasticity to the solution - in general, makes working with it more comfortable.
2. Putty mix. Compositions for outdoor work are used, including decorative plaster, applied only as a finishing layer.
3. Deep penetration primer for outdoor use, which will reduce the water absorption of the base and strengthen it.
4. Fiberglass mesh for reinforcing slopes. This material is inexpensive, but significantly strengthens the concrete layers, so do not neglect it.

When choosing a ready-made solution, we advise you to pay attention to the additional properties of the material. Due to the use of certain additives, the compositions can compare favorably with the classic sand-cement mixture. For example, heat-insulating plaster will additionally insulate your window. It consists of foam glass granules, perlite, vermiculite, which gives similar properties. In addition, the material is moisture resistant. Often used and fiberglass for additional reinforcement.

Now let's take a step-by-step look at how slopes are plastered. In fact, the technology includes only two stages - setting up beacons and working with the mixture. If everything is unambiguous with the second moment, then the first has many options for execution. Today we will analyze a modern way that will help to do everything qualitatively even for a beginner who has not encountered this before.

Table 1. Plastering slopes.

Deep penetration primer prices

Deep penetration primer

Video - Do-it-yourself slopes: beacons for plaster

Frame type slopes

So, if plaster is a continuous slope coating, then there is also a frame type, when there is an empty space inside that can be additionally insulated. The choice of material for such solutions directly depends on the type of building sheathing. Slopes can be made of - plastic, wooden lining, vinyl or metal siding, near-window profile, metal cassette element. The installation of these materials is almost identical, so we did not separate them.

View the following photos for similar slopes.

Each of the listed materials has its own set of characteristics, however, none of them provides the window system with additional thermal protection, like special compositions of plaster mixtures. However, there are methods for warming such slopes: the internal space is filled with polyurethane foam or mineral wool.

Installation takes place as follows:

1. A frame is exposed, which can be external and internal, or only external. In the first case, a belt is attached from a rail or a metal profile near the window frame and the same along the outer perimeter of the slope. In the second - only the outer element - the inner one is replaced by a starting profile, which is attached directly to the frame. The last solution is suitable for plastic and thin lining.
2. All elements of the frame are set clearly in level, as they completely determine the geometry of the future slope.
3. They are attached in different ways, depending on the material. Most often, anchors and metal suspensions are used as fasteners.
4. The finishing material is installed according to the scheme for attaching a specific material. For example, wooden lining can be held by nails and self-tapping screws directly or through metal brackets - kleimers, and siding is held by self-tapping screws and a special mounting profile.
5. The outer corner of the slope is closed with a decorative element. Usually these are false corners, examples of which you could see in the photographs shown above.

It is much easier to make a frame slope than a plaster one, while in 90% of cases it does not need to be further processed. The product begins its service life immediately after installation. Everything would be great, but not every material will last a long time. Painted elements burn out in the sun over time, the tree can rot and change its color. You can repeat the coloring, but it will not look like the factory one, and the slopes will definitely lose their attractiveness. But plaster surfaces can be updated an unlimited number of times.

Prices for various types of slopes for windows

slope panel

Video - Slope of plastic panels

Decorative elements for window framing

Agree, you won’t surprise anyone with ordinary slopes today. How then can you improve the appearance of your home? For these purposes, various elements and techniques are used that can be combined with the types of slopes described earlier.

1. You can frame windows polyurethane pads. They are installed on glue, so you need to provide an even base with good adhesion. They are also suitable for brick walls.

2. Smooth plastered slopes will serve as an excellent basis for finishing with various decorative materials. The photo shows a window decoration option from the outside. decorative artificial stone. Clinker and porcelain tiles will also look beautiful.

3. extruded polystyrene foam also used for similar purposes. Such systems consist of corner elements and a straight profile. Everything is glued on. You can choose any color from the available ones, or paint the material yourself.

4. In cases of façade renovation with decorative brickwork, windows can be laid out separately with shaped products to give them an unusual beautiful look.

5. You can use the services of professional craftsmen who can create such masterpieces for a high price. stucco. These windows look very, beautiful, luxurious and rich.

6. Sandrik- This is a small architectural element above the window, which can be made of concrete, plaster, polyurethane and foam. The complexity of the installation of the part depends on the material.

7. Pyramidal or wedge-shaped decorative element made from the same materials. Mounted at the top of a vault or arch, above a window.

8. Under the window can be installed fake balusters.

It is worth noting that the definition of the necessary decorative elements is a rather complicated matter. If you overdo it, then instead of beauty you get wild pretentiousness and bad taste, so do not be afraid to use the advice of professionals. Of course, they take money for their services, but remember that you create the look of the house and will look at it for more than one year, and only positive emotions should appear from contemplation in you and the audience.

No matter how excellent specialists install windows in your house, traces of replacement will still remain. In any case, after installing a plastic window around it, unaesthetically looking gaps with polyurethane foam coming out of them will be visible. In addition, the foam is destroyed after a few years under the influence of direct sunlight. To give your windows a decent look, you will need to arrange slopes for internal windows.

Why do you need window trim?

Qualitatively made slopes not only ennoble the appearance of the window, but also improve its heat and sound insulation. Besides, they protect the foam layer from sunlight, from impregnation with moisture, which, with temperature changes, will destroy this layer.

Preparation for work

Before starting work, it is required to cut off the excess mounting foam with a sharp knife so that the foam does not go beyond the plane of the window profile. Mounting polyurethane foam, which seals the gaps, is a vapor-permeable material, because of this, condensation may appear on the windows in the future. Therefore, a thin layer of sealant must be applied to the foam on the inside of the window and allowed to dry.

Then the surface of the window opening itself is prepared directly. The remains of the old mortar, plaster are removed from it, debris and dust are removed. If further work is planned with a sand-cement mixture or tile adhesive, then the surface must be treated with a deep penetration primer, preferably with an antifungal effect.

During the USSR slopes were plastered, sometimes after that the window openings were pasted over with wallpaper. Hardware stores could not offer the buyer any more finishing materials. Now the range of materials that can be used for window decoration is much wider, this allows you to choose a finish option for every taste. The most affordable and common finishes are:

When using any of these options for finishing the slopes of windows inside the room, you need to calculate in advance the required angle of dawn - this is the name of the angle between the slope plane and window plane. Experts advise taking 1 cm of dawn for every 10 cm of wall thickness; with a wall thickness of 25 cm, the dawn should be 2.5 cm. Each method has its own advantages and disadvantages.

Plastering

This method can also serve as a basis for other methods. The easiest, but not the easiest and fastest way. You can use both ready-made mixtures and a self-prepared mixture of M400 Portland cement with sand in a ratio of 1: 3.

A plaster mixture is applied to the prepared surface. If you need to apply a thick layer of plaster, it is recommended to reduce the layer first by gluing on the starting plaster or tile adhesive pre-cut to size foam sheet (or expanded polystyrene or any other insulation of sufficient rigidity). From above, the foam is again plastered with a layer about 5 mm thick, perforated aluminum corners are installed along the outer contour of the slope. This will help to protect the slope from damage later.

To increase the strength, you need to put a reinforcing plastic mesh on the plaster.

After the starting plaster has dried, the finishing plaster is applied. For best results, it is recommended to apply two coats of finishing plaster. The surface should be as even and smooth as possible, without various flaws. After complete drying of the surface, it is polished with a grout mesh or sandpaper. The surface prepared in this way is treated with a primer, now it is ready for painting or gluing wallpaper on it.

Disadvantages of slopes made by plastering. Works with plaster mixtures are not very difficult, but still require certain skills. Slopes made in this way have rather weak thermal insulation properties, which ultimately can lead to the formation of condensation and mold.

Frame installation - frame method

It is not always convenient to restore the destroyed surface of the window slope with the help of plaster, sometimes it is more convenient to make slopes from plasterboard, plastic, parquet boards, which are attached to the frame. This method is suitable in case when you need to make a slope of great thickness.

The work is being carried out in three stages:

• Surface preparation.
• Installation of the frame (sheathing).
• Fastening the selected material to the frame.

The frame is assembled from appropriate metal UD and CD profiles. It is not recommended to use wooden bars for the manufacture of the frame. Profile windows are fastened to the opening with screws and dowels, fastened together with self-tapping screws with a drill tip. Next, the material of your choice is attached to the finished frame, soft insulation is placed under it, mineral or glass wool is suitable. And also, if you have a sufficiently rigid material, you can fill the space with mounting foam.

If it is drywall, then special self-tapping screws for fixing drywall (it is most convenient to take self-tapping screws with a size of 3.5 × 25 mm) drywall strips cut to size are attached to the profile. To give the corners strength along the edge of the drywall, perforated metal corners are glued to the putty. After that, one or two layers of putty are applied, after drying, you can paint the surface with acrylic or oil paint.

Since slopes are located at windows where condensation can form, the drywall used for their manufacture must be moisture resistant. Such types of drywall as GKLV (moisture resistant) and GKLVO (moisture fire resistant) are suitable.

Plastic or MDF lining, laminate or parquet boards are best glued to the frame using liquid nails. If you nevertheless made a frame from wooden bars, then the lining sheet along the edges can be attached with a construction stapler, and the laminate or parquet board can be screwed with self-tapping screws. Places where staples and screws are visible will have to be hidden using a plastic corner for this. The same corner will cover the gap between the wall and the surface of the plastic, you get a kind of cashing the window.

With a small slope thickness, it is better to do without a frame, attaching the material directly to the surface of the window opening prepared in advance. For this method, materials such as drywall, sandwich panels, laminate are suitable. All these materials can be attached to an adhesive base, which can be polyurethane foam or liquid nails. It must be remembered that the mounting foam increases in volume when dried, so the possibility of deformation of the material glued with foam should be taken into account.

Decorative rock

Artificial decorative stone or tile is attached to the window opening using a special tile adhesive. If necessary, the surface is pre-leveled with one or two layers of plaster, after drying, the surface of the slopes is laid out directly.

When choosing a method for finishing the materials from which your slope will be made, many factors should be taken into account: the thickness of the walls, the humidity in the apartment, what strength is needed, what funds you are willing to invest, whether you are able to do this work yourself or have to hire specialists. Of these methods, the most inexpensive is the plastering method, it is also the simplest and most durable.

Mounting the slope on the frame includes quite a few operations, the result will depend on the properties of the selected material and the quality of the work. Mounting the slope material on glue or polyurethane foam, among other options, looks the most attractive in terms of price and complexity of implementation.

Slopes made of decorative stone or tile will cost you the most, but they have a rich appearance, are easy to clean and are more durable than slopes made of plastic, MDF panels and even drywall. In terms of strength, this finishing method corresponds to plastering.

The installation of modern double-glazed windows requires careful observance of the technology so that the window structure will properly serve the entire declared period. This is especially true of slopes, because any violation of their installation can significantly reduce the operating time and provoke drafts. To avoid such phenomena, you need to follow a certain algorithm of actions and use high-quality materials. Let us consider in more detail the technology for finishing slopes from the inside.

Finishing window openings from the inside of the room can be dictated by a number of factors, among which there are internal and external. The first group of prerequisites includes:

• increased humidity in the home;
• condensation on double-glazed windows due to a significant difference in indoor and outdoor air temperature

External reasons, due to which there is a need for finishing slopes, are as follows:

• frequent and sharp changes in temperature indicators;
• adverse weather conditions: strong winds, frequent precipitation, intense sunlight;
• the appearance of mold fungi and harmful insects in the walls of the house.

All these factors can have a destructive effect on window slopes and gradually break their tightness. Proper finishing on the inside will help protect against negative impacts and increase the life of windows. In addition, it has an aesthetic appearance and improves the overall perception of interior details.

Drywall

One of the most popular modern finishing materials is drywall. Its operational characteristics make it possible to make high-quality and perfectly even finishing of slopes with a minimum expenditure of effort and money. Due to its light weight and special internal structure, drywall is easy to process and install on both horizontal and vertical types of surfaces. Outside, the material can be painted in any color, in addition, it can be treated with antiseptic agents to prevent fungal and mold colonies.

Material selection

In order for the slopes to be finished with maximum quality, it is necessary to carefully consider the choice of materials. Not every type of drywall is equally good at repairing window openings, since it has different performance characteristics.

First of all, you need to take into account the fact that windows are a source of high humidity, since condensation forms on them during temperature changes. Therefore, when choosing drywall, only moisture-resistant varieties should be preferred. Such material will be resistant to condensate and will retain an attractive appearance for a long time. To enhance the protective properties, it is worth doing an antiseptic treatment and covering the surface with a special paint.

measurements

The most initial stage in the finishing work is the implementation of measurements. Measurements are taken with a tape measure and must be performed as accurately as possible. Otherwise, it will be difficult to achieve a perfect fit of the frame with the slope. Measurement errors can result in the following negative manifestations:

• the formation of microscopic cracks through which heat will escape from the room;
• rapid wear of window structure parts;
• growth of mold and fungus.

Taking measurements

Slope installation

After taking accurate measurements on sheets of drywall, details of the appropriate sizes are drawn, after which they are cut out with a special knife.

drywall cutting process

Installation of cut plasterboard pieces is carried out on a profile, crate or directly on the wall. The last mounting option is only suitable for cases where the wall surfaces are perfectly flat and smooth. If the walls have flaws, they resort to installing strips on which the panels will be mounted. All voids formed during the work must be filled with foam or sealant so that cold bridges do not form in the structure.

PVC panels

Another popular material for finishing slopes is PVC panels, which have good aesthetic, technical and operational properties. Before starting their installation, preliminary preparation of surfaces is carried out, on which leveling rails and profiles are subsequently installed. If the building in which the repair is being carried out is affected by cold weather, it is worth taking care of the insulation of the slopes. For this purpose, the space between the wall and the PVC sheet is filled with mineral wool or mounting foam.

One of the significant advantages of PVC panels is the fact that they are available in a variety of colors and have a smooth surface. Such characteristics make it possible to do without finishing painting and facilitate the care of slopes. In addition, the use of identical materials in physical properties guarantees the same coefficient of expansion, which prevents uneven deformation and the formation of cracks.

Surface preparation

Surface preparation is a mandatory step when installing plastic panels. It includes the following operations:

• removal of excess mounting foam;
• cleaning the wall from dirt and dust;
• antiseptic treatment;
• padding.

A hair dryer will help clean the walls of paint.

Guide profile installation

After the preparatory stage, a frame of guide profiles is installed on the adjacent wall surfaces. To do this, the U-shaped parts are cut into identical segments, according to pre-made measurements of the slope. The resulting profiles are attached to the outer part of the frame using screws with a distance of 20 cm from each other. The side and top profiles are fastened in the same way.

crate

To install the crate, it is necessary to stock up in advance with wooden slats having a cross section of 10x40 or 20x40 mm. Their fastening is carried out on three sides of the window perimeter, with the exception of the surface where the window sill is located. For reliable fixation of the crate, PVC dowels and self-tapping screws are used, the distance between which should not exceed 30 cm.

Panel mounting

Finishing with plastic panels is also good because you can handle it yourself. To do this, the slabs are cut to the specified dimensions using an electric jigsaw, mounted on a profile and screwed to the wooden laths of the crate. All voids formed between the frame and the wall are filled with mounting foam, after moistening the surface.

Installing F profiles

The finishing profile is mounted along the edges of the panels on a special adhesive to give them a more aesthetic and perfect look. For a better fit of the structure, it is recommended to make small cuts in those places where its surface is in contact with the fasteners. The final touch of installation is the application of white sealant to all existing gaps and crevices. This design of the seams serves not only for the benefit of aesthetics, but also protects against the penetration of mold fungi and rapid wear.

Sandwich panels can also be used as finishing blocks for window slopes. They usually draw up the entire perimeter of the opening, including the window sill. This finish allows you to create a single design solution in the interior, combining it with the high performance characteristics of the material itself.

The installation of such plates is not very difficult and can be done by hand. The blocks are fixed by applying the “liquid nails” composition, which provides a tight and durable connection. Before installing sandwiches, it is necessary to make a crate with wooden slats so that the surface of the slopes is as smooth as possible. The final finish consists in processing the joints with silicone sealant, which will give the structure a neat look and protect it from moisture and mold. The voids formed during operation must be filled with foam, which will provide additional insulation of the window opening.

Plastering

Another way to finish windows is to apply plaster. This method can be used only in cases where the slope surface is perfectly flat and smooth. The thickness of the application of the plaster composition should not exceed 2 cm, since thicker layers are subject to rapid cracking and shedding. Plastering includes the following technological steps:

• removal of dust, dirt, application of antiseptic;
• priming with special mixtures;
• applying the initial leveling layer;
• slope surface reinforcement;
• finishing plaster, painting.

Common mistakes

In cases where the technology of finishing work is not respected, serious shortcomings may appear very soon. The window structure does not receive the necessary degree of resistance to adverse factors, and the slope elements wear out very quickly and require new repairs. To avoid such troubles, we will analyze the most common mistakes encountered in the course of work:

• inaccuracies in the measurements;
• ignoring such an important stage as applying an antiseptic and sealant;
• applying too thick a layer of plaster.

In addition, it is worthwhile to carefully approach the choice of finishing material so that it is suitable not only in terms of external parameters, but also in terms of operational properties. Savings in this case are also not always beneficial, since you can run into poor-quality and hazardous material.

Finishing work at the final stage is important for the further operation of window blocks. Yes, they provide:

Internal slopes of plastic windows from at affordable prices

One of the important directions of work of qualified specialists of the OknaDel company is the finishing of slopes with PVC sandwich panels and other materials in Moscow.

We decorate the interior of the window block:

• PVC panels;
• tree;
• drywall sheets;
• tiles;
• sandwich panels;
• plaster.

We carefully listen to the wishes of each client and recommend him the best material option to complete the finishing work with the window. The choice depends on the preferences and budget of the customer.

Plastic window slopes

One of the most popular materials for finishing window slopes is plastic. Its high popularity can be explained by the following factors:

• ease of installation;
• speed of work;
• affordable price;
• compliance of the material with all necessary environmental and technical standards;
• aesthetic appeal.

Sandwich panels

No less popular is the finishing of PVC window blocks using sandwich panels. So this stuff:

• provides excellent heat and sound insulation;
• durable;
• resistant to aggressive UV rays and does not lose color;
• has a relatively small specific gravity;
• easy to operate.

One of the disadvantages of sandwich panels is the low variability in design. So, it is impossible to make slopes in the form of an arch from this material, because sandwich panels require the joints to be closed with special PVC window corners.

Finishing windows with drywall

Drywall is another material used to finish windows from the inside. One of the main nuances of its use is the treatment of surfaces with a special antifungal primer.

The advantages of finishing slopes with plasterboard by specialists from the OknaDel company in Moscow at affordable prices is a direct benefit for the customer, since we have:

• low material cost;
• profitability, that is, the possibility of using scraps remaining after repair in finishing work.

Finishing of external slopes of plastic windows

No less important are the internal manipulations of work on the exterior finishing of window slopes, the price of which in our company is affordable for each client. Our craftsmen carry out the installation of panels from the outside of the windows as soon as possible after the installation of a plastic double-glazed window, as this is required by the technology of this type of work. This allows you to reliably protect the assembly seam from the effects of the surrounding aggressive environment.

In addition to ensuring the safety of joints and seams, the material gives a logical completeness to the window from the side of the street. As a rule, finishing of window slopes from the outside is carried out using plastic panels or siding.

High-quality and fast work with window slopes at an affordable price is done by the golden hands of OknaDel masters

Finishing work with PVC windows is the final stage of the process of installing plastic double-glazed windows in Moscow, the importance of which cannot be overestimated. That is why it is advisable to trust only professionals in their field.

LIKE THE MASTERS OF OUR COMPANY!

Highly qualified specialists of the OknaDel company will not only carry out the installation of plastic double-glazed windows, but will also carry out all the necessary finishing work at a high quality level.

Tsugunov Anton Valerievich

Reading time: 12 minutes

The final stage of the process of installing modern windows is finishing the slopes. A thick profile, multi-chamber double-glazed windows and reliable fittings provide excellent thermal insulation, but the interface between the window frame and the apartment wall remains a cold and unattractive place. If you do not provide due attention to this area, then condensation, mold and wall destruction may occur. Therefore, let's find out which slopes are best suited for plastic windows.

What requirements must slopes meet?

Before considering window framing options, their advantages and disadvantages, let's decide what is required of these elements.

Tsugunov Anton Valerievich

Hello, friends!

First, I will talk about all types of slopes, as well as their pros and cons. I will describe the subtleties and share my experience. At the end of the article, I will give recommendations on which slopes are the best choice, and in which cases one or another material and finishing method should be preferred.

Enjoy reading!

Slopes should:

• Not inferior in terms of window design durability. Modern double-glazed windows are designed for at least 15-20 years of operation. Slopes are required to withstand no less time without loss of basic qualities. Few people like to redo them every two or three years.
• Correspond to the general style of the window, to form a single whole with it.
• Maintain or even improve the performance of plastic windows.
• Withstand mechanical loads and impacts of the sashes.
• Be repairable if possible.

Olga returned 21,024 rubles, while the cost of windows was 43,800 rubles

Hello! I ordered the installation of 2 plastic windows: one in the kitchen and the second large window with a door to the balcony in the room. Price for both windows amounted to 43 800 rubles. The company is quite reliable and well-known, I read a lot of good reviews about it, it has been working for a long time. As a result, the order shook my nerves!

Firstly, at first the window to the balcony was brought larger than necessary. Fortunately, the master first measured the old window and the one that was brought, and did not immediately break the old window.

We agreed to move the installation. They said they would call and say when they could deliver. The next day I was informed that they had some problems with production, the profile had ended, they were waiting for delivery from day to day (the manager explained this to me by phone).

All this took 2 weeks. And every day they called me and "feed me breakfast."

I called the window company, but they explained to me that the team was busy and could only come in 10 days to fix the deficiencies. And they didn’t say a word about the delay at all, as if this was the way it should be. They didn't even apologize!

I studied a lot of information on the Internet, how to act in such a situation. On legal aid websites, I was immediately charged for a consultation ( 1 500 rubles), then for representing my interests and for compiling each piece of paper. They said that if necessary, they would bring this case to court ( the cost of filing a lawsuit from 20,000 rubles). I did not want to contact lawyers and pay them that kind of money.

Then I remembered that along with advice on how to save on repairs, I received letters about. I went through and bought it in a couple of minutes, paid with a card. Downloaded immediately. By the table of contents in the Instructions, I found a description of my case.

Everything is clearly written and examples are given of how to write a claim. And it also says in which folder the empty and filled .

There are many documents there, they are all arranged in folders and the folders are signed.

Finishing a window opening with plaster has the following advantages:

• Versatility. This material is used in rooms with different indicators of humidity and temperature.
• Democratic price. Plaster is an inexpensive material, and it is also possible to save money by doing the work yourself.
• Strength. Plaster slopes are more resistant to mechanical stress compared to other types of finishes.
• No seams. Perhaps the main argument of the supporters of such a coating: it is not necessary to additionally process the joints and interfaces of the opening planes.
• Possibility of renewal and repair.

Tsugunov Anton Valerievich

Master wagon. Entrepreneur. 15 years experience. Over 100 completed objects.

To date, this is the most "dirty" and long way to finish. In order not to encounter condensate and mold, I recommend choosing this method only in warm rooms, for example, when a window is installed between a heated balcony and a living room, then freezing of the slopes is excluded. And also if there was no place left for the installation of sheet material.

Drywall slopes

For their manufacture, pieces of plasterboard of the required size are used, which are screwed to the profile frame or glued to the sides of the opening. Then the surface of the drywall is primed, puttied and painted. In the case of laminated GKL, further finishing is not required. The space between the wall and the new slopes is insulated with mounting foam and insulation.

It is easier and faster to fix the GKL than to display a flat plane with plaster. But do not forget that after installation, a fine finish is required, which will take several days. If you use laminated GKL, then the installation of slopes is done in one day.

To avoid the stage of fine finishing, you can take laminated plasterboard instead of the usual one. But in this case, you will have to use special corners to close the ends of the sheets.

Gypsum fiber slopes (GVL)

The technology for mounting slopes from gypsum-fiber sheets is practically the same as mounting drywall, the advantages will be the same. At the same time, GVL is devoid of the disadvantages of GKL: it is much stronger and tougher, and its moisture-resistant variety is not at all afraid of a wet environment.

Mr. Build believes that, when properly installed, GVL slopes outperform other options in terms of performance and appearance.

It is not recommended to use single-sided sandwich panels and decorative wall panels made of thin cellular plastic for finishing the window opening. They do not have the necessary strength, wear resistance and thermal insulation qualities.

• Installation speed. Plastic slopes are mounted faster than drywall and even more plaster.
• The minimum amount of dirt and dust when facing with plastic.
• 100% moisture resistance.
• It is possible to replace part of the slope in case of damage.
• The frame covering the outer contour reliably protects the junction of the wallpaper and the window opening.

• Interior incompatibility. Glossy plastic will look unnatural in a classic-style room, as well as in any other design direction that uses natural materials.