Installing a dryer on a washing machine. Clothes dryers: advantages, selection and installation. Rules of our work

After buying a dryer, the main thing remains - to install it correctly. Typically, the installation of the dryer is carried out in several ways:

  • in line with the washing machine. This arrangement takes up additional space, but allows you to use the resulting horizontal surface to place detergents or laundry baskets;
  • devices with a standard depth of 600 mm are perfectly built in the kitchen under the countertop;
  • in a separate place ("solo"). During installation, the unit must be set exactly on a horizontal level;
  • an economical way is to install the dryer on the washing machine (in a column) or on the wall above it. This option can be used when there is not enough free space in the kitchen or bathroom. When mounted in a column, the washing machine is always placed at the bottom, as it is much heavier than the dryer.

The dryer cannot be installed directly on the cover of the washing machine without special fasteners. An additional load from above can lead to accelerated wear and failure of parts, since the drum of the device is not designed for it at a high speed of rotation. In addition, the dryer may slip and fall.

To install the dryer in a column, special connecting kits (transitional frames) are used, which are placed between the bodies of the apparatus and protect against the above troubles. Such fasteners are included with the dryer or purchased separately. They are low cost and very easy to install.

Not all models of dryers can be mounted in a column. How to install a dryer in a particular case, you can ask the seller when buying.

Dryer connection

When connecting the tumble dryer to the electrical network and the drainage system, it is necessary to follow all the requirements of the instructions. The device is simply plugged into a power outlet, and if necessary, an electrical cable with grounding is laid and a circuit breaker is mounted. To ensure safety, it is forbidden to connect through various tees and extension cords.

  • connect both devices to the same outlet;
  • use both machines.

If, nevertheless, the simultaneous operation of both devices is supposed, when connecting, it is necessary to separate them into different machines.

Condensing type dryers provide for the withdrawal of water into a special container, which must be emptied after each drying. If there is a drain hose, the unit is connected to a floor drain or sink siphon.

In models with an exhaust hood, the air duct is connected to the ventilation system. For such dryers, installation of an air duct directly into the window is possible. This option is not very convenient, since the duct takes up space and adds to the installation hassle.

A properly installed and connected dryer will fit into any interior and make your life much easier.

Recently, clothes dryers have become as popular as washing machines. A tumble dryer will help you dry your laundry. Installing such a device is not tricky, and therefore, you can install the equipment yourself. Another thing is to allocate a place in an apartment or house for such a voluminous apparatus. Here you will come to the aid of a new way of installing devices for washing and ironing - in a column.

Washer and dryer in a column: Bosch and other brands

How to install two work surfaces - a washing machine and a dryer so that they do not take up much space, but take up space to a minimum? To do this, quite recently they began to apply a method of organizing useful devices in a column.


If there is not much space in the house, you need to place two washing units one above the other. The dryer is installed above the washing machine, which absolutely negates the area it takes up.

You can always install a clothes dryer on top of the washing machine and in any free room. This placement of machines can be used in the kitchen, and in the bathroom, and in a separate laundry room, and even in the corridor. But it should be understood that it is necessary to fix the devices so that the vibration coming from one machine does not suffer and the other does not fall. In addition, vibration should not affect the performance of both machines.

There are several mounting options:

  • Installing the dryer on top of the washing machine using a special mounting bracket that comes with the dryer;
  • Fastening the dryer to rails that are fixed to the wall above the washing machine. For this case, the most important thing is to take into account the load to which the wall and shelf will be subjected, and the safety precautions for fastening;
  • Mounting machines in niches, which can be made from dense drywall, plywood, or other suitable material.

Each homeowner, taking into account the characteristics of the premises, can develop their own version of the installation of machines.

Dryer and washing machine in a column: Siemens installation nuances

First of all, it should be understood that the best option for a home would be to install machines in a column, from one brand, for example, Siemens. They almost always match in size and are produced in the same specific style, which will look harmonious on the outside.

If you purchased a washing machine a long time ago, and bought a dryer quite recently, then they will not match either in design or in parameters. In this regard, the dryer should be chosen as similar as possible to your washing machine. So you keep the harmony in appearance.

In addition, it must be understood that the dryer must always be placed above the washing machine, since it weighs less and does not vibrate as much. The installation option itself will depend on the type of machine for drying clothes.

Today, there are several types of Siemens dryers on sale:

  • exhaust;
  • Heat pumps;
  • Condensing.

Each of these types brings its own nuances to the way they are connected, and requires a separate approach to installation. For example, exhaust drying requires connection to ventilation, or ventilation pipes should be brought out through the window, which may require additional communications. Condensing dryers do not require ventilation at all. During their operation, steam is accumulated in a special tray. After each drying, it must be emptied. In order not to do this, some drain the condensate into the sewer pipe by connecting a flexible hose.

Dryer connection: how to install two units in a column

How can you fix the dryer on top of the washing machine correctly? First of all, you need to think about the fact that the surface where the machine will stand is flat. It is best to install the equipment on a concrete or tiled, but not slippery floor.


It is quite possible to install a dryer on a washer. But this is possible if the washer is loaded from the side, and not from above. This is an excellent option for mounting both machines, especially since they are functionally interconnected.

The washing machine must be level. Only when you are sure that the first appliance is set correctly, you can proceed with the installation of the dryer.

Do-it-yourself installation of machines in an apartment or house is carried out as follows:

  • A dryer stand is installed on the washing machine;
  • It is necessary to lay rubber seals on it;
  • Fix the stand and seal with bolts;
  • Put the dryer on the washing machine, taking into account that the legs go into special nests;
  • From the outside, close the recesses with plugs.

This method of installing machines is very relevant for owners of one-room apartments, where there is very little space, and you have to save every centimeter of space.

Installing a dryer in a column with a washing machine

You can connect the dryer on top of the washing machine only with the help of a special mount. Many manufacturers of dryers include mounting brackets with their models. But sometimes, you have to buy it yourself.


The fasteners are installed on the body of the washing machine, and the dryer is then attached to them.

These connecting parts are also needed in order to prevent the machine from tipping down during operation, and in addition, they protect the washing machine from vibration damage. However, you should take into account that errors or illiteracy during installation will certainly create complications during operation. In view of this, with self-doubt, it is best to entrust the installation of devices to professionals.

Tips for installing and using machines:

  • Do not stack machines directly on top of each other without a perfect fit. It is forbidden.
  • In no case should two machines be turned on at the same time, even if you are sure that the wiring will withstand the load;
  • It must be remembered that for vibrating machines it is necessary to leave a free space of 2-3 cm from the wall.
  • Try to keep both machines from the same manufacturer;
  • If it is not possible to pick up cars of the same brand, buy the same size.

When planning the installation of machines one on top of the other, be sure to check and clarify the availability of communications that will provide electricity, water supply and drainage for both machines.

Installing a washing machine and dryer in a column (video)

It should be remembered that the simplest installation option will require a special mount. If you plan to put the machines in niches, then for their manufacture you will have to prepare such materials and tools as drywall, a knife, a metal profile, a socket, self-tapping screws, putty, finishing material, and so on. The method of installing a washing machine and dryer in a column is most often chosen by those who begin a major overhaul of a bathroom or corridor. If you do not feel enough of your own strength to carry out the installation with high quality, then it is better to invite a specialist in whom you are confident.

Do you have a question about installing a laundry dryer? There is a very simple solution to this problem. Call us or leave a request online on the website - installation and connection of the dryer will be performed by the best craftsmen in Moscow and the Moscow region.

We employ only qualified specialists with specialized education and extensive experience.

All work will be carried out quickly and accurately, taking into account the characteristics of the premises and all your wishes.

Our master will call you back in 5-7 minutes and discuss with you all the details of installing the dryer.

Our prices are fair! The price includes all necessary work and materials:

Installation on ready-made communications 1200 rub. check out free of charge

Mounting on finished communications 1200 rub. Works:

- unpacking

- connection to existing communications
- test run

Installation on partial communications 2700 rub. check out free of charge

Installation on partial communications 2700 rub. Partial plumbing installation - 2700 rubles.
- departure of the master within the Moscow Ring Road
- unpacking
- removal of transport bolts
- installation by level on a regular place

- connection to an existing socket
- test run

Materials:
- tap
- siphon
- withdrawal
- fittings
Partial installation of electricity - 2700 rubles.
- departure of the master within the Moscow Ring Road
- unpacking
- removal of transport bolts
- installation by level on a regular place
- connection to an existing water intake
- connection to an existing drain
- test run

Materials:
- copper cable - 13 m.
- IEK automatic switch
- DIN rail
- external single socket

The installation price does not include extension of hoses and work with furniture

Complete plumbing and electrical installation 3500 rub. check out free of charge

Complete plumbing and electrical installation 3500 rub. Works:
- departure of the master within the Moscow Ring Road
- unpacking
- removal of transport bolts
- installation by level on a regular place
- work on the organization and connection of water intake
- work on the organization and connection of water drain
- work on the organization and connection of an electrical outlet
- test run

Materials:
- tap
- siphon
- withdrawal
- fittings
- copper cable - 13 m.
- IEK automatic switch
- DIN rail
- external single socket

The installation price does not include extension of hoses and work with furniture

Complete plumbing and electrical installation (VIP) 5600 rub. check out free of charge

Complete plumbing and electrical installation (VIP) 5600 rub. Works:
- departure of the master within the Moscow Ring Road
- unpacking
- removal of transport bolts
- installation by level on a regular place
- work on the organization and connection of water intake
- work on the organization and connection of water drain
- installation of a mechanical aquastop valve
- check valve installation
- work on the organization and connection of an electrical outlet
- test run

Materials:
- tap
- siphon
- withdrawal
- fittings
- copper cable - 13 m.
- circuit breaker ABB
- DIN rail
- external single socket
- anti-vibration feet
- check valve to the sewer
- mechanical aquastop valve

The installation price does not include extension of hoses and work with furniture

Additional services for installation of a washing machine from 300 rubles.

Additional services for installation of a washing machine from 300 rubles. - departure of the master within the Moscow Ring Road (if carried out separately from the complex installation) - 900 rub.
- Departure of the master outside the Moscow Ring Road - 40 rub/km
- dismantling of the old freestanding washing machine - 300 rub.
- dismantling of the old built-in washing machine - 500 rub.
- installation of a non-return valve for sewage (with the cost of the valve) - 700 rub.
- installation of a mechanical aquastop valve (with the cost of a valve and a 2m hose) - 2000 rub.

All services can be ordered both in addition to the complex installation, and separately.


What to look for when choosing a service:

  • A dryer is a complex household appliance that requires a serious approach. To properly install and connect, you need the appropriate experience.
  • Installation involves the performance of standard types of work, the price of which should be fixed and not change during the provision of the service.
  • Too low cost of work may indicate the incompetence of the master and poor-quality materials used.
  • The price list may only indicate the minimum cost of installation, excluding materials and other necessary work.
  • A warranty period of 2-3 months may indicate that the company is not responsible for its work.

Rules of our work:

  • Simple and affordable service.
  • Experienced, punctual and polite craftsmen.
  • Only fixed prices for all works and materials.
  • Certified consumables from trusted suppliers.
  • Additional bonuses and discounts for regular customers of our company.

We provide a 2-year guarantee on all types of work and materials

Our masters are professionals in their field!

More than 11 years in the service market!

Same day installation!

  • There are some features in connecting the dryer, ignorance of which can lead to its untimely failure.
  • If at first glance it seems to you that you can easily connect the dryer with your own hands, remember that an independent installation can not only lead to damage to the equipment, but also to a refusal to repair under warranty.
    • Professionally installed dryer.
    • Competent connection to all communications.
    • Reliable component materials of the Italian company Fornara.
    • Saving time, nerves and financial costs - the master will bring all the necessary materials with him.
    • A guarantee for all works and materials - 12 months.
      • Immediately after receipt of the application, a specialist in the installation of dryers will contact you and clarify all the details of the order.
      • The master installs and connects your dryer in the shortest possible time, after which he demonstrates its operation.
      • For all work performed and materials, a warranty card and a discount card for our company's client for all other types of services are issued.
      • Exactly at the appointed time, a neat and polite master comes to you. We employ only masters with a Moscow residence permit and work experience of at least 5 years.
      Prices for installation and connection of dryers
      Standard Installation of Freestanding Tumble Dryers 2100 rub.
      Standard installation of built-in dryers 2400 rub.
      Connecting free-standing dryers to ready-made communications 750 - 1400 rubles
      Connecting built-in dryers to ready-made communications 900 - 1700 rub.
      Installing a dryer on a washing machine (in a column) 2150 rub.
      The cost of dismantling old equipment 300 rub.
      Drying unit next to the washing machine (in line) 1000 rub.
      Departure of the master outside the Moscow Ring Road 30 rubles/km.

      Proper installation of dryers

      Installing a condensing dryer is almost the same as installing a washing machine. Here, in the same way, it is necessary to have a separate power electrical line with grounding and sewage, you do not just need to connect it to the water supply. Exhaust machines will require a duct to carry warm, moist air outside or into ventilation ducts. When installing, it is best to contact a specialist who has serious knowledge in electrics and plumbing, who has repeatedly dealt with such units and can suggest different ways how best to connect the dryer.

      Wiring diagram for condenser dryer

      1. Electric cable.
      2. Control Panel.
      3. Tray for collecting condensate.
      4. Tank door.
      5. Heat exchanger.
      6. Feet for leveling.
      7. Holes for cooling the heat exchanger.
      8. Drain hose for condensate drainage.

      Features of installation and connection of dryers

      The subtleties of installing dryers largely depend on the principle underlying the operation of such equipment. Manufacturers produce machines for drying clothes of 2 types:

      • exhaust (ventilation type), in which warm, moist air is vented outside through a flexible duct;
      • condensing, in which air leaves moisture in the heat exchanger, it is collected in a special tray and then drained or discharged directly into the sewer.

      The condenser tumble dryer can be installed almost anywhere. it does not require connection to communications. Exhaust - installed as close as possible to the ventilation duct so that the length of the duct is as short as possible. Experts recommend installing drying units against an external wall so that high humidity does not penetrate into living quarters. For the same reason, the installation site must be well ventilated.

      If the area allows, the dryer can be placed next to the washing machine (in line). This will make it possible to additionally use the working surfaces of both machines. But most often, to save space, the clothes dryer is suspended above the washing machine. When installed in a column, special fasteners are used, which are included in the standard package. It is not recommended to use other fasteners, especially those made by yourself. They may not be able to support the weight of the machine and vibrations during operation, resulting in damage to both machines.
      Connection to electricity and sewerage must comply with all the requirements specified in the instructions: laying an electrical cable with grounding, installing a circuit breaker and an AC power outlet with a protective contact. The network parameters and voltage recommended by the manufacturer are indicated on the rating plate. It is strictly forbidden to use tees and extensions.
      It is quite difficult to install and connect such rather bulky equipment on your own. Especially if you decide to hang the dryer over the washing machine with your own hands. Experienced specialists will do everything to ensure that the installation of the dryer is done correctly: they will select a suitable place, carry out competent installation, taking into account all the features of the room and operation, and set up all modes of operation of the dryer.

With the advent of new technology in the house, life becomes easier, but the question immediately arises: how to properly install it? Installing the dryer is a quick and uncomplicated process. It is possible to do the placement with your own hands, without calling the master to the house and thereby saving the family budget.

If you have already made a purchase, but still do not know how to install the unit, please read the article carefully. We offer different options and ways to install the dryer, which will require a minimum of time and effort from you.

Dryers: main types

Today on the market you can find a decent assortment of dryers of different manufacturers and models. All of them are divided into 3 main types depending on the installation method:

  • exhaust;
  • condensation;
  • with heat pump.

Automatic machines of the first type carry out drying of linen due to the removal of air from the machine into the ventilation shaft. Condensation type models pass warm air through the drum, after which the condensate is collected in one place - the collection container. It has to be washed regularly, after each cycle. Heat pump appliances operate through the evaporator and remove excess moisture directly into the sewer.

Ventilation models are traditionally in the greatest demand among buyers. Their installation is possible both in private houses and in apartments. The other two types of cars are less popular.

The most frequently sold and sought-after brands of drying machines:, Samsung, "", "Whirlpool".

How to install a dryer

It is possible to install the unit for drying clothes in several main ways:

  • on top of the washing machine;
  • in a pre-made drywall niche;
  • in the same horizontal plane with the washer;
  • in the bathroom (in the kitchen), under the sink or countertop;
  • on the balcony.

Let's consider in more detail each of the methods.

Setting "above"

Installing a dryer above a washing machine in a residential area will save precious space and make the washing and drying process as comfortable as possible. You can install equipment in any room or utility room.

Did you choose this option for yourself? There are 2 mounting methods available:

  • With the help of fasteners that come with the dryer.
  • With the help of additional rails mounted on the wall above the washing machine (very rarely used).

Follow the instructions below to secure the unit as securely as possible.

  1. Level the washer above which the new appliances will stand (ideally, it should be placed on a flat surface - a concrete or tiled floor).
  2. Install the top unit stand on top of the washing machine.
  3. Place rubber seals between the lower unit cover and the stand to reduce vibration.
  4. Fasten the stand with screws.
  5. Place the unit on the stand so that the legs of the appliance fit neatly into the existing grooves.
  6. Seal the outer recesses on the mount with plugs.

Important! Placing the washer and dryer in a column is the most difficult option. Here it is necessary to adhere to safety precautions and installation rules so that the structure does not collapse during operation. It is strictly forbidden to place equipment one above the other without using special fasteners!

Points to pay attention to when placing vertically:

  • Do not use fasteners that you are in doubt about.
  • Pre-calculate the load that will fall on the wall.
  • Never turn on 2 units at once at the same time (even if you are sure of the quality of the fasteners and the reliability of the wiring).
  • Remember: during operation, the dryer vibrates strongly, so leave a gap of a couple of centimeters from the wall.
  • If possible, buy household appliances from the same company. In the kit, it will look as harmonious as possible, it will fit perfectly into any interior, and the mounts will fit perfectly.
  • Is it possible to buy units from one manufacturer? Choose devices of the same size (the overall dimensions of the lower equipment should under no circumstances be smaller than the dimensions of the dryer).
  • Never place a clothes dryer under the washer, as the latter always has a much greater weight and vibrates much more during the washing process.

Installation nearby

We figured out the sequence of actions when installing a dryer over a washing machine in a column. A very simple option in execution is the installation of equipment nearby. You will have to free up more free space. This method of placement is suitable for apartments and private houses with large rooms and utility rooms.

Installation is as easy as shelling pears: the unit is placed in the right place, after which its legs are unscrewed to the desired height according to the level.

Niche accommodation

In the process of repairing an apartment, a special niche can be provided for a dryer. To make it, you will have to buy drywall, metal corners, putty, finishing materials, fasteners and invite a specialist who will perform the necessary work.

This method of installation is more laborious and costly, but also practical. Subsequently, you will receive an attractive interior, in which household appliances will be harmoniously integrated.

Accommodation in the bathroom

Most often we are talking about installation under the countertop or sink. This option is not suitable for small spaces. At the same time, it will be quite simple to carry out installation work and just as easy to connect the equipment to the sewer or ventilation system.

Important! When installing the dryer in any place and in any way, make sure that the necessary communications are available - grounded sockets, access to sewerage and a ventilation pipe.

Experts advise placing devices for washing and drying clothes only in well-ventilated rooms, in order to avoid the accumulation of moisture and its rapid failure.

You have already understood that it is possible to place drying equipment in the house in different ways. In the process of choosing the optimal place, be guided by the characteristics of the purchased device, the size and features of the premises, the location of communications.

The most important rule is that the installation must be safe. Doubt your abilities? Entrust the installation to a professional who knows all the subtleties of this matter.

It is quite possible to install a dryer on a washing machine. Of course, if the washing machine has a side front load of laundry.

This is a great option for those who have a small living space, but are not going to give up the services provided by drying equipment.

If it is not possible to put two machines side by side, we put one device on top of the other and get the following design. Look at the photo:

The method of installing appliances in a column not only saves space, but is also practical, convenient to work with and looks quite natural.

But choosing this complex installation option, you need to take into account some details and follow the installation rules. Namely:

If you want this technical structure to have an aesthetic appearance, it is highly desirable that both devices are of the same brand, that is, they are similar in design. Then they will be one whole. Such a harmonious "ensemble" will perfectly fit into the interior of a bathroom, kitchen or other room.

If matching brand and design is highly desirable, matching the top and bottom dimensions of both machines is a must.

Washing machine installation

In this building, the washing machine is always at the bottom. It weighs much more and therefore is, as it were, the base of the column. So, it is very important to install the washing machine correctly first.

The rotating drum inside the appliance generates vibration. At the slightest unevenness of the floor, the washing machine during operation (especially when spinning clothes) will vibrate strongly and slide along the floor in one direction or another.

Therefore, everything must be done to reduce the vibration level of the washing machine. We install the unit on a flat, preferably non-slip concrete floor. Hardwood floors and other soft materials will only contribute to the vibration.

We check the stability of the device. If, with light pressure on any corner of the upper surface, the machine leans in any direction, then it is not yet ready for work. Moreover, it is impossible to install another unit on top of it. To achieve a clear level and maximum stability of the unit, adjusting the height of the legs of the machine will help.

If you managed to achieve the stability of the washing machine, then you can proceed to the next step.

Dryer installation

You can install the dryer on top of the washing machine only with the help of a special mount. Some manufacturers of dryers offer a mounting bracket included with the models. But more often than not, you have to buy it separately.

Fasteners are installed on the body of the washing machine, where the dryer is then attached.

These fittings are required. Firstly, in order to prevent the dryer from tipping over from top to bottom during operation of any of the machines. Secondly, they protect the washing machine from vibration damage.

There is another installation method: rails of durable material are attached to the wall above the washing machine, where the dryer is then installed. Mounting the dryer securely on the wall is very important for the safety of your home and family.

Errors or negligence during installation will inevitably create difficulties for you during operation. Therefore, it is always better to entrust this work to an experienced specialist.

Sometimes cars are installed in a special niche. Below (on the floor) washing machine, above (on the shelf) dryer. A niche can be made of durable drywall. With this type of installation of devices, it must be remembered that vibrating machines require some space. It is recommended to maintain a distance of at least 2 centimeters from the wall.


dryer on the shelf

So: there are three options for mounting the installation of devices in a column. Choose what suits you best.

I consider it necessary to warn: do not even think of installing machines directly on top of each other without special fastening. This is strictly prohibited!

Also, do not use both machines at the same time. It is especially dangerous to simultaneously turn on both devices at the same time with the help of a separator.


Please rate this article:
Fitting © 2022 Design and interior of apartments