How to sew sofa covers. The process of cutting a cover for a corner sofa with your own hands. Types of fabrics that are suitable for covers

Not only to ennoble old furniture, knowledge is needed how to sew a sofa cover, but also in order to save a new purchase, especially if the base upholstery of the sofa itself is not too wear-resistant. In addition, the manufacture of such a coating can be attributed to a variety, since with a textile transformation, absolutely any furniture can be brought into line with the chosen style of the interior of the apartment, moreover, without buying overly expensive furniture sets.

How to sew sofa covers with your own hands

Definitely apply knowledge how to sew sofa covers maybe those of us who, in principle, know how to handle a needle and thread at a good level and are good at handling dense fabrics. Help, of course, will be a sewing machine and other useful sewing devices, but the main work will still need to be done manually. In addition, an important and necessary skill will be to build patterns on your own, since you are unlikely to be lucky to find a ready-made solution for your sofa.

The easiest way to practice is to take an existing cape, which may have been bought in ancient times, tear it apart and transfer them to a new fabric. But this is not always possible, so you still have to train by other methods. The craftsmen also offer us to make a trial product using the lessons how to sew a sofa cover with which are posted on many handicraft blogs, both foreign and domestic. For a trial product, the cheapest and most affordable fabric is selected, which it will not be a pity to use. Details from it are sewn to each other with the help of simple stitches, the main thing is to check how much they all fit together in size and how tightly they sit on the furniture. After the test drive is completed, the test product is ripped open and all its parts are used for cutting on a more expensive fabric, as parts of a pattern on a 1:1 scale. Then, after use, you can put this fabric on a pillowcase for or for other needs.

The simplest options among all master classes - how to sew a sofa cover without armrests, Such small pieces of furniture are very popular for furnishing country houses or nurseries, moreover, the armrests may well replace small tightly packed ones. The cape in this case will be of a very simple form, and frills and flounces are used for decor, which are sewn on the underside of the furniture.

It is this model that is also used to create standard garden ones, which definitely need a cover, since they always stand in the open air and often get dirty.

How to sew a cover on sofas, an armchair

The standard procedure should start with a measurement, whatever you plan to do. This is also used in how to sew a sofa cover or even chairs. After all, we all saw elegant chair capes at ceremonial banquets, and all of the methods listed below can be used in that. The easiest but very effective way to build a pattern is to draw your chair or sofa and break it into simple rectangles. If the product is small, then you can use one rectangle of fabric for the back and for the seat, but in most cases you will have to cut these parts separately.

Using the dimensions of all the rectangles, transfer them to special pattern paper. It has an adhesive base, so working on it will be much more convenient than pinning tracing paper with pins to the surface of the fabric. Between all the rectangles, you need to leave allowances, the size of which will be 5-6 centimeters, depending on how confident you are in your sewing skills. You can always cut off extra centimeters in the process of finishing joining parts. The process is not too creative, in fact, and is very reminiscent of a do-it-yourself task - the same strict geometric shapes and simple seams. This stage of the process how to sew a sofa cover photo, found on the Web, you will be illustrated in sufficient detail.

Sew all the cut out rectangles to each other with the seams outward and try on the furniture you need. You will see if the canvas is tight, if you need to release the seam more somewhere, and somewhere, on the contrary, you can hem it so that the fit is perfect. Only after such a fitting, you can already proceed from the outline to the full stitching of all the details.

How to sew a cover on a corner sofa

Before touching the topic how to sew a cover for a corner sofa, we must talk about such an important aspect as choosing the right fabric for this purpose. After all, in fact, not every one is suitable for becoming a convenient and practical cape, and not every one will be able to work effectively right the first time.

It is believed that two extremes cannot be used - a fabric that is too light, requiring additional processing and does not hold its shape well on its own, as well as heavy upholstery fabric, which is used directly for the production of furniture. Light materials include, first of all, satin, chiffon, rayon. No matter how beautiful capes made of such materials look, it’s better to leave them to create dresses, it’s impractical and difficult to manufacture. But upholstery material is mistakenly considered by many to be ideal precisely because it is also used in furniture production to cover structures, which means that it should also be used for covers. But after all, the upholstery is fixed on the surface with the help of a furniture stapler, carnations, it is well pulled literally piece by piece. So this fabric is absolutely not stretchy, you can not pull it yourself on each armrest, and in fact from time to time you will have to remove the product for washing and cleaning. That is why it is better to choose the golden mean - a dense, medium elasticity material, preferably with a special impregnation that will allow the furniture surface to remain clean as long as possible. Before opening, it is desirable to wash, dry and iron any fabric in order to provide for possible shrinkage of the finished product, which can ruin all your work after the first wash.

A feature of the corner sofa is that we will need to cut out a few more rectangle parts. If we compared the previous procedure with sewing half-shells, then this one can be equated with the ability to make, that is, the shape remains geometrically correct, but each part consists of several. You can see the instruction How to sew slipcovers for a corner sofa. A photo demonstrate what the layout should be in order to pack all the right angles.

It is worth spending more time and stitching each seam, treating it with non-woven tape from the inside so that it is clear and even, only then you will get the perfect geometry for a complex-shaped sofa and it will not look like it has been thrown over a blanket and spread a little around the edges . For a tighter fit, you can add a zipper to the back of the sofa to make it easier to remove and re-attach the fabric.

How to sew sofa armrest covers

Often, if you have already bought furniture with high-quality and expensive upholstery, you do not want to hide it under layers of bedspreads and other materials. No wonder you ran around all the shops in the city and looked through hundreds of catalogs, trying to match the color of the upholstery with wallpaper or flooring. Therefore, you may want to protect only the most vulnerable and quickly dirty parts, such as armrests.

Moreover, if you know how to sew sofa armrest covers, then you can change them as often as pillowcases for sofa cushions, timing new upholstery, for example, for Halloween, with pumpkins or black cats, by choosing a fabric with small cockerels and chickens, and not Valentine's Day - with hearts and flowers.

Since the armrests themselves are quite rounded, the fabric with it can peel off very quickly if it is not fixed. In a large case, the parts hold each other, but here you need to provide for an autonomous mount. For it, you can use an elastic band or ribbons that are sewn on the sides and tied with bows, which is an additional decorative element. In addition, you can use Velcro as fasteners, but it is better to always put them under the bottom of the armrest, since the Velcro will get very dirty from above with constant contact and will have to be changed often.

How to sew a cover on a sofa with an elastic band

We are already accustomed to the convenient fastening with an elastic band, which is used, in particular, for the manufacture of bed linen. You can use this technology and learn, how to sew a cover on a sofa with an elastic band.

A rubber band is sewn into the bottom of the already sewn cover and it is she who helps to keep the fabric in place even when several people sit on the seat. The undoubted advantage of elastic bands for fastening is that the finished product can be put on and removed from the sofa for cleaning and washing in just a matter of seconds.

You can find such products in master classes by the name that was assigned to them in the "folklore" - eurocover. In fact, such specific products made of elastic material were once produced by the Italian factory Ga.i.Co., in the image and likeness of which covers other manufacturers began to produce products. But since this is a rather expensive purchase, the craftswomen also learned to do such things on their own, especially since the elastic wrinkled fabric, which is ideal for this, is also not a problem today to buy in a fabric store or order via the Internet.

Since the fabric is quite elastic, it is sewn according to a general pattern without division into small individual parts. And after the front and back parts are sewn, the stretch fabric is simply stretched over the surface of the sofa, tucked a little into the gaps between the seat, back and armrests to form the appearance of the furniture, and hangs down with a pretty fringe.

The appearance of a bedspread on the sofa in the living room is almost always a forced decision. The design of modern models is very diverse, refined and luxurious, and rarely anyone wants to cover all this beauty with a piece of fabric. But if there are small children, fluffy animals in the house, and some of the family members smoke, a cover is necessary.

The main function of the bedspread is protective. Even in cases where the upholstery of the sofa is made of special, stain-resistant and easy-to-clean fabrics, there are many other possibilities to make it unusable. And if the mistress of the house does not know about it, then kids, cats and dogs will gladly demonstrate the whole range of options.

And turning a comfortable, designed for rest and relaxation sofa into a restricted area is also not the case.

The bedspread is sewn from a dense, at least half synthetic fabric, resistant to wear and easy to wash. The material protects the upholstery from stains - from lollipops to felt-tip pens, getting wet when spilling water or drinks, mechanical damage - scratches, claw marks and attempts to cut beautiful stars.
Some of the upholstery fabrics - leather, synthetic leather, of course, look luxurious, but they are unpleasantly cold to the touch. And if in the warm season this is not an inconvenience, then on damp autumn evenings or in winter, when it is cold from just looking out the window, leather upholstery creates discomfort. To avoid it, a “winter” cover made of fleecy warming fabric is thrown over the sofa.
The third function appears when there is a desire or need to change the color scheme of the interior. You can, of course, upholster the sofa with another fabric, but such an operation costs a lot. But a coverlet, matched by color and style, will cost much less, and will cope with the task just as well.

The cover also performs approximately the same functions. But here it all depends on the design of the sofa and the model. So, if the corner sofa is a folding one, and is used as a bed every day, a cover or cover on it is simply inconvenient. It is tightly pulled over the product, and it is tiring to take it off every evening and put it on in the morning. In this state of affairs, the cover is much more comfortable.

If the sofa is modular, and the owners of the apartment like to exploit this feature, then the bedspread will not cope with its task, since with different configurations of the product you will need capes of different sizes. In this case, a cover is put on each module.

Below you will find a selection of photo novelties of beautiful bedspreads on, and in the following sections - prices for them.

Photo of stylish bedspreads for a corner sofa

SK-40 Terracotta Rainbow Purple fannel Shop sofa bedspread Tapestry E-43

Materials for the product

Not every fabric is suitable for this role. It should be dense and durable - the product will have to be washed the more often, the more time small children spend in the living room. It should be easy to wash and not prone to absorbing any kind of dirt, as it will have to get acquainted with all possible dyes - from coffee stains to sweets lost in the corners of the sofa. It must be strong and even rigid in order to protect the upholstery from the claws of animals.

With all this, the matter should also be pleasant to the touch and look, since we are talking about comfort and beauty.

Tapestry fabric is durable, dense, very decorative. Features of weaving make imperceptible traces of claws. It is easy enough to wash, dries for a long time and is far from tender to the touch. However, for cases when the living room is combined with the nursery, this is the best option. The cost of the product is considerable - from 15 thousand rubles, but in terms of durability and wear resistance, jacquard fabrics are much superior to other materials.
Microfiber is a synthetic fabric with a very high hygroscopicity. This cover guarantees 100% protection against stains, as it successfully absorbs spilled liquids. It is erased very easily, does not form pellets for a long time. The disadvantage is that it cannot be dried near heating appliances, since shrinkage is possible with high heat. A universal option, but only if the household is not allergic to any component of the fabric. A microfiber cover will cost 10-15 thousand rubles, a cape - from 500 rubles.
Blended fabrics - as a rule, include 50% polyester and 50% of any natural fiber: cotton, viscose, silk. The material washes well and dries quickly. A definite plus is the reproduction of any texture, from silk to imitation fur. A cover-cover made of such fabric costs from 800 to 15 thousand rubles, depending on the design and manufacturer. Capes are much more affordable - from 320 rubles.
Plush - fleecy fluffy fabric made of synthetic and cotton fibers. It has a warming effect, very pleasant to the touch. Easy to wash and dry. This is one of the most popular fabrics. The cost of a cape and plush covers is very affordable - from 250 to 2000 rubles.
Velor - despite the delicate velvety surface, is quite resistant to wear, has a warming effect and is very decorative. Velor is made from a mixture of natural and artificial fibers, since it rarely causes allergic reactions, and the strength is quite comparable with canvases made from synthetic fibers.
Velvet is the most decorative option. The material is made from silk or cotton fibers, is very delicate and creates a magnificent play of shades. However, it does not have durability. In cases where there are small children in the family, it is better to postpone the purchase of a velvet bedspread for several years.
Faux fur - most suitable for interiors in the style of ethno, art deco, vintage, loft. The product is easy to wash, despite the hairiness, and dries easily. The fur blanket is very cozy, gentle and perfectly warms. The cost is not so big - from 1500 r.

Another option for bedspreads is a blanket. Woolen, cotton, mixed fabric - any of them is distinguished by a characteristic pattern - a cage, and a warming effect. The plaid often plays the role of both bedspreads and blankets. The option is universal for classicism, rustic styles, English and so on. Of all the models, there is hardly anything that creates such a strong feeling of comfort.

The following video contains a selection of stylish bedspreads for your corner sofa:

Where can I buy

Covers and all kinds of bedspreads are very popular products, so finding a model to your taste and size is not so difficult. Where can it be done?

Textile stores

Textile shops - provide a huge selection of fabric types, textures, color combinations and sizes. The catalogs include hundreds of options, and if the product is not currently available, it can always be brought from the warehouse.

Advantages:

you can see with your own eyes the exact match of the shades;
find the required invoice;
check the quality by carefully inspecting the product.

Disadvantages:

if the sofa was made according to a special project and has a complex configuration, the finished bedspread will not work.

Photo of a blue bedspread on a corner sofa

Internet platforms

Online store - to all the advantages of a textile store, the ability to make purchases without leaving home is added. The catalog of the Internet portal is the most complete, includes many manufacturers, suggests the possibility of choosing a color, type of bedspread - cape, stretch cover, and the most incredible design.

The advantage of being able to see photos and buy bedspreads for a corner sofa in an online store is not only that it is inexpensive, but also this:

very large, textures, shapes and other things;
You can get advice on fabric care and purchase a product without leaving your home.

Disadvantages:

the shades in the photo do not always match;
it is difficult to find a sofa cover with an unusual configuration. The choice of bedspreads is not difficult.

Light cover for a corner sofa

Companies specializing in household goods - Ikea, for example, or Bon prix. In such cases, the product is selected from the catalog - both online and in paper form, and received by mail.

Advantages:

choosing and ordering goods does not require a mandatory visit to the store. Although in large cities of Russia it is quite possible to find an Ikea brand store and make sure of the quality of the bedspreads on the corner sofa directly;
the company guarantees the return and exchange of goods if a marriage is detected. Moreover, these obligations are sacredly fulfilled;
quite a large assortment, in most cases you can choose the color of the product.

Disadvantages:

The price includes the cost of shipping the goods.

In the most extreme case, if the sofa has a complex shape - curvilinear seats, backs, then a bedspread on a corner sofa can be ordered at a sewing workshop. In this case, all the features of the sofa are taken into account, and all wishes for color, texture, decoration and design. This cover will cost more.

And finally, we will talk about how to sew a bedspread on a corner sofa with your own hands.

The coloring of the IKEA BACCABRU covers on the corner sofa

Do it yourself

There are two main types of products:

cape - in fact, it is a piece of fabric of such a size as to cover some part of the sofa - the seat, part of the seat, back, and so on;
cover - fits part of the sofa, completely covering the upholstery from all sides.

The first option to sew off on your own is as easy as shelling pears: the sofa is divided into conditional sections - or not conditional, if we are talking about a modular product, they measure, cut out pieces of fabric of the required size and overcast.

Despite the simplicity, the resulting product can look very attractive. For example, one-color contrasting capes against the background of one-color upholstery are a great option for minimalism.

The second method is somewhat more difficult to implement. The procedure in this case is as follows.

The sofa is mentally divided into separate sections: the seats of the left and right parts, the back of the left and right parts, the seat of the module, if it is not L-shaped, and.
Every detail is carefully measured.
According to the measurement, a pattern is drawn, and then transferred to the fabric. Cutting comes with a tolerance for seams and overcasting - 2 cm.

If you have sewing skills, but have never encountered patterns before, you can do otherwise. Get a cheap workout fabric, or use an old sheet for this, and lay it on the couch parts so that the piece of cloth forms a cover. The fabric needs to be well straightened, stabbed with needles, cut off the excess - taking into account allowances of 2 cm, and bast right on the sofa. Then the “draft” is removed, ripped open, and the resulting patterns are transferred to the fabric of the bedspread.

Assembles the details of the pattern: first, the side seams are processed, then the edges are overcast or folded. An elastic band is sewn in: then the cover holds much better. Instead of an elastic band, you can install a zipper or sew on ties.
The product is ironed.

Decorative details - bows, applications, lace, braid, are selected in accordance with the interior.

You can find patterns for sewing a bedspread on a corner sofa with your own hands in many books on needlework. And below we will present a photo of the products.

Photo of homemade bedspreads on a corner sofa

Fringed Beige Knitted Stripes Patchwork

A bedspread on the corner sofa of the living room is a must-have accessory if there are small children in the house. In other cases, the product is used not so much to protect the upholstery, but to create comfort or update the interior.

The following video will teach you how to make a sofa cover in 1 night:

And this video tutorial will help everyone who knows how to crochet to create a chic plaid for a corner sofa:

Furniture is the main component of the interior of the room. When choosing it, we are guided not only by the design, but also by the convenience of this item. However, holidays, children, pets can ruin the furniture, make it ugly. At such moments, you seriously think about purchasing removable covers for a chair or sofa. They can be changed and washed, they are much cheaper than a whole sofa. But often such covers cost fabulous money in the store, while the cost of such assistants is several times less than the amount declared by the seller. That is why many housewives know how to sew a sofa cover with their own hands. We will be happy to reveal their secrets especially for you.

The sofa cover is very easy to sew. To complete it, you will need a minimum of sewing tools: a sewing machine, tape measure, thread with a needle, safety pins, scissors, a piece of chalk or dry soap, and, of course, a thick fabric. The fabric for sofa covers can be any, to your taste, but it must certainly be durable and wear-resistant enough. In addition, it should be easy to wash, because you will often wash the covers.

So, once you have all the necessary tools at hand, you can begin work. First we need to measure our sofa. We measure everything - the seat, back, armrests. Important: measure the components of the sofa as if they were rectangular, regardless of their shape. After you measure everything, you need to write down the results on a piece of paper so as not to forget. Also, do not forget to add 8 cm to the measurements for the seams.

Next, we move on to working with fabric. Before you start sewing, you need to wash and dry the fabric so that it does not shrink after the next wash. After that, spread the fabric on a flat surface and apply the measurements taken on it. You should have 6 rectangles. Mistresses are advised to start cutting from the back of the sofa. After cutting the elements, they must be attached to the sofa, with a certain detail to a certain part of the sofa. All details are laid out from the wrong side. After you lay out the elements of the future cover, they need to be fastened with pins.

Important: before sewing on a typewriter, you must sweep all parts of the cover by hand. You can do it right on the couch. After basting, you can cut off unnecessary pieces of fabric from the future cover and stitch the seams on a typewriter. In this case, one should not forget about allowances - about 2-2.5 cm.

The cover is almost ready. We try it on the sofa, looking for irregularities and flaws that can be corrected. After we have finalized the cover, we remove the basting, turn the cover right side out and put it back on the sofa to see if everything is in order. If the edges of the cover are visible from under it, they can be folded on the wrong side and sewn on a typewriter. All threads must be cut.

If you want to give a cozy and slightly romantic look to your sofa, you can decorate the cover with ruffles along the bottom edge. You simply fold the same fabric in the form of neat folds and sew them on a typewriter, remembering to make allowances and process the edges of the product.

Some wise advice for beginners:

Purchase material with a margin. After taking measurements and choosing the fabric for the future cover, take the fabric with a margin of 1.5-2 meters. Even if you don't need it, you can make the same cushion covers.
If you are a beginner, you should not take expensive fabric. After all, if something doesn’t work out for you, it will be very annoying to throw away expensive material. Start with cotton fabrics, and if you succeed, you can move on to more expensive materials.
Even if you have been sewing for a long time and consider yourself a professional, a preliminary estimate is required.
If you still messed up with the size, do not rush to carry the cover to the landfill. With the help of simple boards, you can adjust the cover to fit the sofa, if you made it too big, of course.
The cover for the corner sofa is as easy to sew as for the usual one. The only caveat is to correctly calculate the amount of fabric needed. It can be obtained as follows: add the length and width of the sofa, and multiply the resulting amount by two. The resulting number will be the amount of fabric required for the corner sofa.

It remains to be said that sewing sofa covers is an easy, affordable and exciting activity. You get brand new sofas for a very, very low price. This will help refresh your interior and update the look of your furniture. Moreover, when your girlfriends find out that you yourself have created such a masterpiece, they will urgently want to learn how to do the same.

Options for making covers with patterns

Pattern of a universal cover for a sofa.

Cover pattern for a corner sofa.

A selection of video materials

Most interesting articles:

Today, self-made accessories for the home are gaining more and more popularity. Textiles look especially attractive in this design. It is not surprising that many craftswomen are wondering how to sew a sofa cover. This hand-crafted coating will bring individual chic and a special, unique charm to the interior of the room, helping to set the right tone in the design of the space.

Features of preparation for work

The advantage of self-made sofa covers is practicality. Such textiles protect furniture from:

claws of pets;
dust;
crumbs;
mud;
drops of your favorite drinks;
felt-tip pens, pens and pencils if there are children in the house.

You can order such textiles from professionals in the atelier. However, a hand-made product will turn out to be especially attractive and stylish, for which you just need to make a minimum of effort and turn on your own imagination. If there is a fear of sewing an accessory, you can use the decor. Overhead bows, voluminous ribbons and stylish sofa cushions will help divert attention from the flaws and misses of a cover created by yourself. Decorative elements will make the model non-trivial and stylish, organically fitting it into the interior style.

Material selection

Having decided to sew a universal sofa cover, you should take care of the selection of material in advance. Since the product will experience a strong load in the area of \u200b\u200bthe seams, it is recommended to choose strong threads, since they should not be allowed to diverge. It is better to use a double seam, which will make the model more durable and practical. At the same time, you should not set a smaller step on the typewriter, since this often only spoils the fabric. A small step breaks through the material, makes it loose and does not allow it to withstand strong tension, which is especially important for products on a corner sofa.

Blue case

Many needlewomen believe that sewing a furniture cover on their own is an easy way to transform it. This statement is true to some extent, but first you have to take into account a lot of nuances. First of all, you should think about what fabric is best to create a product. Since it is not always possible to create an ideal option the first time, the first experiments should be abandoned immediately from expensive material. The best way to start is to choose a fabric:

durable;
not expensive;
with a dense texture on which you can not leave puffs.

detailed instructions

An excellent solution would be coarse calico or a high-quality tapestry. Not knowing how to sew a sofa cover, it is best to follow the instructions. First you have to calculate the material for work. For ordinary furniture, about 8 meters of fabric is required. However, for an accurate calculation, you should:

measure the length of the furniture;
find out the width of the sofa;
fold 2 lengths and 2 widths.

So, if the width of the sofa is 180 cm and the length is 210 cm, then 7.8 meters of material are needed for sewing, where its width is 150 cm.

However, it should be borne in mind that this is a rough calculation of the fabric, and in order to obtain more accurate, correct numbers, you need to make a careful calculation. Many needlewomen know that you can get specific numbers only after creating a pattern.

The subtleties of creating a template

Without special experience, it will be quite difficult to create it. To do this, you need to thoroughly measure:

each plot;
basic quantities;
all details.

Sofa with a cape

Then the needlewoman must redraw them on paper, but in a reduced format. Then, taking into account the pattern of the fabric, the direction of the print and the equity line, you need to create a layout. If you plan to use a material with a geometric pattern, striped fabric, it should be borne in mind that they significantly increase consumption, since they are cut strictly in a certain vector.

Sofa covers without armrests

In this situation, it is necessary to add at least 1 more meter to the calculations obtained. Even if all the fabric is not useful, it can be used in the future to replace problematic, most worn areas. This is especially important for models without armrests. Worse, if the material was not enough. However, in such a situation, you can go for a trick and use a different material for the back of the back.

Stages of work

The first stage involves taking measurements from every detail of the sofa.
Next, you need to transfer all the measurements obtained to graph paper, which is created on a scale. In this case, it is necessary to remember the direction of the cut, which is professionally called the share line.
The next step is to transfer all the parameters to the material, while on the wrong side it is necessary to make markings with chalk. At this stage, it is extremely important to take into account the allowances for hemming the edges and seams.

Cape pattern

It is also worth remembering that each sofa is a unique case. That is why there are hardly any patterns that are ideal for each model. To create a template, it is recommended to use carbon paper or ordinary newspapers. You can paste over them with adhesive tape all parts of the furniture. Such a pattern can be corrected directly on the spot with scissors. Then all the details are assembled and fixed with a stapler or tape, and the missing fragments can be increased.

If you need to create a universal cover, then it is optimal to sew an accessory on an elastic band. The pattern is made up of the details of the seat and back, cutting out a pair of rectangles with parameters 40 by 30 cm from the curved lunges. Next, the points ABC and A1B1C1 are fixed, as well as the vectors where the elastic bands will be stitched. On the back, you need to stitch darts from the wrong side, the width of which is 10 cm and the depth is 15 cm. Then you need to move away from the AA1 line by 18 cm: an elastic band is fixed there. Then you need to sew 4 more elastic bands with the same interval.

Then, along the lower edge, rectangular segments with parameters of 40 by 30 cm are fixed. Next, the bottom is hemmed by 1 cm. The fabric is turned inside out, after which all seams are sewn. How much does it cost to create such an accessory? Inexpensive, especially when compared with ready-made sofa covers.

Learn how to sew a chair cover and update your interior

No matter how well the upholstery of upholstered furniture is preserved, over the years the same pattern gets boring. Upholstery is expensive, and we are starting to think about how to sew a chair cover in order to somehow update the interior. In fact, a cape made in accordance with all the rules of good fabric works wonders. The room becomes completely different, especially if the material contrasts with the previous upholstery in quality and texture.

Learning to sew a chair cover

First look around the room and think about what fabric to choose for the cape. Women know perfectly well how any branded bag can change the wardrobe - you have to urgently select everything else for it. The same thing happens with housing. Covers made of genuine leather will require expensive parquet and stretch ceilings, and a motley chintz in a classic interior will look like a poor relative.
Choose a fabric that is durable and wrinkle-resistant, because the cape will be subjected to considerable loads every day. In addition, it is easier to grind dense material, it does not wrinkle so much. It is better not to take a fabric with large flowers, a cage, prints, especially for beginner needlewomen. You may simply not be able to match the pattern, and the cases will look ridiculous.
As for the cut. An inexperienced seamstress must first cut and sew a chair cover with their own hands from an old sheet. Don't waste your time on this. Firstly, experience and understanding of various difficult moments in the work will come, and secondly, it will not be necessary to sprinkle ashes on your head because of damaged expensive fabric.

Measuring the chair and calculating the required footage of fabric

The configuration of furniture today is very different, so the capes are actually sewn on the chair itself. Let's take a model with frills. First, we will decide where the seams of our cover will pass. The easiest way to make them is where the seams of the upholstery itself are laid, then the cape will repeat the silhouette of the chair with greater accuracy. If tailoring of covers of a radical new style is conceived, we mark the seams directly on the upholstery (preferably with soap). We immediately take into account the inserts for thickness, bends, alignment of the contour.

We measure all the details of the chair (back, seat, armrests, curb, pillow, if any) and write down the numbers obtained. The length of the fabric for lush frills is calculated as follows: the perimeter of the chair must be multiplied by two. In order not to get confused in the names, we write the part number, its width, length, depth.

Measurement of chair parts

When calculating the footage, it is necessary to take into account tucks and tucks, without which there is no tight fit, as well as folds, folds, frills.

For each element of the pattern, in addition to seam allowances, we add about 20 cm for overlaps and fitting the cover. We measure the details of a non-standard shape by placing thin, strong paper on them and compressing it from all sides. You can additionally circle the folds with a pencil.

We cut the resulting tracing paper along the lines and put it in place again. Do not achieve perfect convergence, we need an approximate pattern to make a general pattern of the part. We will customize in place. After measurements, we draw patterns of all elements of the chair on graph paper and calculate the final fabric consumption.

Now we are preparing everything you need to sew a cover for a chair with your own hands:

A piece of inexpensive fabric for a draft cover (chintz, muslin, or, as we have said, an unnecessary sheet).
Thick beautiful fabric for the cover.
Lightning.
Centimeter, ruler, scissors.
Pencil, crayon or sharpened bar of soap for marking on the material.
Pins with an eye for cleaving fabric, needles, threads, cord for piping.
Furniture clips for attaching the cover to the chair.
Sewing machine.

Cutting fabric

We lay out paper patterns on fabric in the most optimal way so that there is as little material waste as possible. We chop off the paper with the material and circle the patterns with chalk. If the allowance has not yet been added, add it now. Cut out the details. We iron all cut out patterns from top to bottom along the longitudinal thread.

Cutting and connecting parts of the back and armrests

We turn the cut out part of the outer part of the back in half, mark the middle along the longitudinal thread. We unfold, lay the pattern on the back of the chair and pin it with pins. When cutting out a chair cover with your own hands, be sure to mark the lines of future seams with a pencil. We repeat all the steps with a pattern for the inside of the back.
We combine and cut off both patterns on the top of the chair. We bend a supply of fabric at the upper corners and on the inner pattern, forming neat tucks. We chop them off, moderately stretching the fabric. Cut off the excess, leaving 5 cm on each side.
We cut out the inner pattern in the place where the back rests against the armrests, leaving small allowances (2-3 cm). We fill them in the gap between the back and armrests. At the junction of the backrest with the seat, we draw a seam line.

Pattern for the back of the chair

For each armrest, we cut out two patterns - external and internal. We pin the outer part of the armrest to the outside, having previously folded the fabric in half and marked the central longitudinal thread with a pencil. The lower edges of the fabric should overlap the intended seam of the frill by 1.3 cm. We cut off the outer back and armrest patterns with the edges outward. We draw lines of seams.

The inner part is connected to the outer one at the place of the outer seam laid with a pencil. The inner pattern should have a good margin on all sides (18-23 cm). One side of it goes to the inside of the backrest by 18 cm, the other - to the front of the armrest. We place the lower edge of the workpiece on the seat.

We chop off the outer and inner parts of the armrest in front, laying the folds diverging from one point.

This is one of the ways how to make chair covers with your own hands neatly, below we will consider the second one.

We lay the tucks on the outer part of the armrest, below, under the rounding. All excess fabric will go there. We carry out seams at the beginning and at the end of the tuck line, mark them on the outside of the backrest and on the inner pattern of the armrest. On the inside of the chair, lines mark the joints. Repeat all operations for the second armrest.

Pattern for the armrest (the first option is with folds)

Option number 2 - for wide armrests

The voluminous front of the armrest does not always look good with the diverging folds mentioned earlier. Then we cut out a special insert for it.

Covers for sofas, armchairs, chairs.

We pin the inner pattern of the armrest in place, mark the seam on the front and cut off the fabric along it, leaving 2 cm for allowances.

We cut out the insert and pin it around the perimeter of the front. Draw a seam line. We chop off the insert, the inner and outer patterns of the armrests with the edges outward.

Pattern for the armrest (the second option is for wide armrests)

Cutting the seat parts

We put the seat pattern with a margin of 23 cm in place so that its bottom is on the line of the beginning of the frill. We combine the details of the back, armrests and seat. We mark the places of internal pairings of the chair with bold dots or in another way that you understand. We cut the excess fabric, fold the tucks on the front corners of the seat and cut them off. Do-it-yourself chair covers are already taking on a certain look.

We chop off the seat part with the outer armrest pattern and outline the seam line that will connect them. We fill in the gap between the back and armrest 1.3 cm of fabric. We draw lines of seams in these places.

seat pattern

Open the frills of the cover

Cut out the bottom of the cover. It consists of two parts - a smooth top and a gathered bottom. They, in turn, consist of four equal parts, one for each side of the chair. We measure the bottom of the chair along the perimeter and multiply by two - this is the width of the lower gathered part. The length of the frills should reach the floor. We pin the four upper parts around the perimeter of the chair, the four lower parts to them, immediately and evenly laying the frills. We hide all marked seams in folds.

Pattern for frill

Chair cover sewing

We inscribe all the details on the front side (for example, PNP - right outer armrest, NS - outer back, etc.), mark the top of the patterns. Folds, tucks, tucks, points of intersecting seams should be clearly marked. The chipped patterns give a complete picture of how to make a chair cover. It remains to sweep the trial cape by hand, with large stitches. Sewing order:

First we sew all the tucks, tucks, frills.
Next, we sweep the elements of the armrests. All work is done from the wrong side. We turn the details out, after making small cuts in the corners.
Sew the seat to the armrests.
We sew the far edge of the seat with the lower part of the inner back, we tack the outer side of the back to the cover.
We sweep together 4 parts of the hem, first the upper part, then the lower, evenly laying the assemblies.
We sew the upper part of the hem to the cover, to the upper part - the lower one. The zipper will be located in the side seam.
Turn the cover right side out. If there are sags, irregularities, wrinkles, we rip these places, level them, and sweep again.
We put the cover on the chair, adjust it again in place, achieving the perfect contour.

Chair cover sewing

We check whether all the details are marked, and we rip the test product into patterns. Now you can take expensive fabric and cut it according to ready-made patterns. The stitched cover will sit on the chair like a glove. And you did it all with your own hands.

Petar Petrov

Cats are wonderful pets. At the same time, they have their own character, they may want to play or cuddle when you sleep or watch TV, they can purr for no obvious reason for a person, they can do a lot of things, guided by some of their own motives. In addition, cats love to scratch various surfaces. Unfortunately, the legs of your favorite antique table, the upholstery of a sofa, or an expensive carpet may be your favorite scratching surface. How to protect furniture from cats?

While people usually don't like it when cats scratch furniture, you need to understand that cats don't scratch to annoy you, but simply because they need to. Scratching is as much a part of a cat's natural behavior as, for example, purring. To successfully control it, every cat owner must know why cats scratch furniture and other objects.

In the wild, cats leave scratches on their territory to signal their presence and claim their territory. The scratches left behind contain information of two types - visual and olfactory. Visual information is presented in the form of claw marks, it is so obvious that even a person notices it. Olfactory marks are much less clear to people, they are left with the help of special pheromones, the smell of most of which is not recognized by humans at all. Pheromones are contained in a substance produced by the cat's body, their smell is understandable to other representatives of the cat species, it serves as a signal, depending on which cats change their behavior.

Scratching allows the cat to achieve some more goals. The dead outer layer, which can often be found in the house, is removed from the claws - it retains the shape of the claw. Although scratching does "sharpen" the claws, scratching is primarily a form of physical therapy that allows the cat to keep the muscles and ligaments of its paws in good shape.

Two groups of "targets" are selected for cat scratching. The first group includes one or two areas in the house, usually near strategically important places, such as a couch, a litter box, or a playground. The second group of objects on which the cat makes more destructive scratches are the most visible surfaces - doorways, windows, and furniture that is in plain sight, such as sofas.

What to do to protect furniture from cats.

1. Make sure your cat has enough scratching surfaces. Cats often scratch near the places where they eat and sleep, so appropriate items should be placed there. Buying a post-claw post is a great investment for your cat. The cat will be able to sharpen its claws on it and stretch at the same time. If you want to provide your cat not only with a place to scratch, but also a place for her to climb up and sleep, consider a cat tree (a tall pole with platforms at different levels and possibly a house).

How to sew covers for sofa armrests?

Cover the furniture with something that cats don't like: double-sided tape, some plastic wrap, or aluminum foil. Many cats don't like the feel and sound of foil, most cats hate things that stick to their fur. Double-sided tape works well for attaching carpets, just make sure it doesn't harm the furniture itself.

3. If the cat is bored or stressed, the cat may scratch the furniture or tear the curtains. Give her as many opportunities for physical activity as possible, and she will have less desire to engage in destructive activities. The cat should have enough time for games (and you can also relax a little). Cats react to certain smells, sounds, movements, they like surfaces of a certain texture, so cat toys should match the inclinations of the animal. To find out the preferences of your cat, offer her several toys of different sizes and from different materials - according to her reaction, you can choose several optimal options.

4. Arrange, where possible, tins with a few coins inside in such a way that when you try to scratch the can, it falls with noise and clanging - cats do not like this.

5. Use inexpensive alarm devices on curtains that hang on door handles. An alarm will sound every time your cat tries to use the curtains as a ladder.

6. Equip in front of the window a place for your furry friend. This will provide the cat with many hours of entertainment - especially if the windows overlook the trees that the birds have chosen. Make sure the window closes well so your pet doesn't fall out.

7. If you catch a cat scratching furniture, shout out loud "no!" or/and spray it with a water gun or a plastic bottle. Cats are well aware of what you want to achieve, immediately stop spoiling your property. Of course, this will not stop the cat when you are not around.

8. Adjust the arrangement of furniture. If the cat jumps onto the cabinet from the back of the chair, move the chair further away. Having lost the launch pad, the cat will stop jumping where it doesn’t need to.

9. You can attach balloons to problem areas with tape. After the cat has "exploded" them a couple of times with its claws, it will avoid scratching the furniture in these places. Use this method of education only when you are at home in order to remove the burst balloon in time - the cat may try to eat it.

10. There are special devices that protect furniture from cats - they produce different sounds. Such devices can be purchased at pet stores or ordered online.

11. If the cat still scratches the furniture, apply a spray with the smell of a bitter apple or put orange peels in the appropriate places. Such smells protect furniture well, as cats really do not like it.

12. If all else fails, you can train your cat to trim its nails regularly to minimize the damage from scratching. To get your kitten used to having their nails trimmed, praise them and reward them with treats.

In the process of protecting furniture from cats, any form of physical punishment should be excluded, as they can cause fear or aggression towards the owner. In the best case, the cat will learn to stop tearing furniture only while the owner is nearby.

No matter which method you choose to protect your furniture, every cat owner should know that it is wrong and unfair to expect a cat to completely stop scratching any furnishings.

Armrest upholstery for sofas and armchairs.

Repair and sofa armrest upholstery included in my list of services. Thousands of products have passed through my hands, and I can say with confidence - "Each armrest is unique in its own way." This is not surprising, every decade has made its own adjustments to the form, design, functionality. Changed not only the shape but also the size. The only thing that remained unchanged was the general principles. Significant revolutionary changes have not occurred here, and are unlikely to be foreseen.

The photo above shows a sofa and an armchair, as I believe with a simple armrest. There are no sewing jobs here. The armrest elements (top, side, and front bar) are upholstered in a single piece of fabric. The top in the front part is assembled with decorative folds. In this case, the armrest on the sofa is removable, which makes it easier to repair and reupholster.

armrest upholstery no different from the upholstery on the sofa. As a rule, they try to make a sofa and an armchair in the same design, and externally and internally they almost do not differ. On the chair, the armrests are bolted to the seat and back.

How to sew a cover on a home sofa with your own hands: step by step instructions

There is a need to remove the back wall of the chair, which naturally increases the time of work.

Here is another representative with removable armrests (blue sofa on top). The father-mother connector allows you to easily remove and proceed with disassembly and repair or constriction. In another corner (nearby), the armrest and backrest are made in one piece, and armrest upholstery or repair is already reduced to a complete disassembly of the product into elements.

Above in the picture on the left is a sofa where the top of the armrest is sewn in one piece with the back and seat. And the back wall with the sides of the armrest. In this case, in order to pull the armrest, you need to completely remove all the fabric from the sofa and alter it. There is simply no other way.

Armrests with an adjustable angle of inclination, as a rule, are also sewn together with one cover both with the seat and with the back.

It happens, as we saw above, in general, everything is sewn with one cover. In this case, too, everything is removed, sewn, and only then everything is upholstered in a new way. Here, as in the previous case, it is better to update the entire fabric entirely.

The format of the article does not allow to place and give all the examples, so I will finish with another type of sidewalls of the sofa with decorative overlays. Here the top of the armrest is sewn together with the back as a single unit. To disassemble it, it is also necessary to remove the fabric of which the back of the sofa and sides are upholstered, then just remove the cover from the back and sidewall.

I wrote all this for one purpose, to try to show the variety of armrests. And also help with the choice of furniture. If you keep pets, it is better and more practical to buy furniture of a modular type, with removable sides. In this case, the hauling of the armrests will cost much less than the hauling of the entire sofa or chairs.

Every woman dreams of protecting her sofa from the negative impact of various factors on it. After all, over time, even with a careful attitude to it, the seat material can be wiped, the fabric can begin to shine, this is especially true for the armrests, and holes and hard-to-remove spots may appear on the upholstery. To prevent this from happening, you need to put a cover on the sofa, which will help protect it from all sorts of problems. You can sew it yourself, especially since it is a very simple and exciting process.

Benefits of upholstery covers

Making covers for upholstered furniture, in comparison with the replacement of upholstery, is a less time-consuming process that does not require special professional training. The main advantages of covers include:

maintaining the cleanliness of furniture;
giving an original appearance;
ease of use;
aesthetics;
ease of washing;
low cost;
creating an exclusive home design.

Sofa cover with ties

Covered furniture will always look like new. If you sew several options, you can constantly update the look and change the interior of the room as you wish.

Cape on the sofa with your own hands

Shape, dimensions

Before sewing a cover on a sofa, it should be noted that furniture comes in different shapes. Modern sofas can be rectangular, corner or shell-shaped.

Note! The sofa covering must clearly correspond to the shape and size of the product.

Depending on the purpose of use, all covers have functional varieties:

Universal - made of elastic material. It is easy to sew them with your own hands. Consist of two layers of special stretching textiles.
Covers with a "skirt" - used to decorate interiors in the style of country and Provence. A feature of such sofa coverings is the presence of a frill located at the bottom of the product.
Covers with an elastic band - stretched over the product and fixed with a sewn-in elastic band. Easy to make with your own hands, even without a pattern.
Eurocover - when sewing, only special textile material is used, which takes any sofa shape. Textiles consist of special fibers with good elasticity. Such capes are considered practical. When sewing, there is no need for careful measurements. Often these covers are used for corner sofas of any configuration.

The size of the cover depends on the shape, design style and preferences of the owner. Measurement of upholstered furniture must be carried out carefully and competently.

Note! To calculate the required amount of material for sewing a cover, you need to take two lengths and add two widths of the sofa to the result.

Corner sofa cover with elastic band

Materials, tools

Sewing sofa covers should begin with the choice of material and the preparation of all the necessary tools.

Required Tools

To sew a cover for a sofa or chair, you will need to prepare the following tools:

scissors;
centimeter tape;
overlock;
threads;
pins;
chalk for marking;
sewing machine.

The sewing machine should be designed for sewing medium to heavy fabrics.

Tools for sewing capes on furniture

Materials for manufacturing

There are a number of requirements for textiles for a sofa cover. Experts recommend giving preference to the following matter:

flock;
microfiber;
velour;
cotton
jacquard;
chenille;
natural and artificial leather;
natural and artificial fur.

First of all, the material must be wear-resistant, durable and easy to clean.

Varieties of furniture fabric

How to choose fabric

When choosing textiles, you should also consider the purpose of the room. For sewing a cover for a nursery or playroom, it is best to purchase fabrics that are pleasant to the touch and environmentally friendly, which are easy to clean. Cotton, microfiber, velor or chenille are ideal. When choosing a material for a living room or kitchen, it is necessary to give preference to materials that are practical, easy to clean and resistant to external influences. In this case, it is recommended to purchase microfiber, eco-leather, leather, velor or jacquard. For the bedroom, eco-friendly, non-shedding and damage-resistant fabrics such as chenille, flock, velor and microfiber are suitable.

Elastic sofa cover

Despite the fact that the sofa cover is not a complex sewing part, the following recommendations should be followed in the process of its manufacture:

When buying material, it is best to take a fabric with a margin of about one and a half meters. In the future, the remaining textiles during operation will be useful for possible repairs.
During cutting, you should not save. You can always cut off the excess, but adding material will not work.
It is not recommended to immediately sew the parts, neglecting the basting.
Since the load on the seams during the operation of the cover is very significant, it is recommended to stitch the parts twice.
For the strength of the seam, it is necessary to increase the tension of the threads. It is best to use reinforced cotton or synthetic threads for sewing covers.
Since too small stitches violate the structural integrity of the fibers of the fabric, the optimal indicators should be chosen. The recommended stitch length is 3 mm.
If there are pillows on the sofa, then it is best to sew a cover for them with a zipper or Velcro.
To fasten the cape to the sofa, you can sew a band for tying or decorative cords to it. In this way, the cover can be securely fastened.

Optionally, you can decorate the sofa cover. In the form of jewelry, you can use all kinds of frills, bows or make embroidery. It should be borne in mind that accessories must be selected in the same style with the interior of the room.

European sofa cover with lace trim

Do-it-yourself sofa cover sewn

After all the necessary tools have been prepared, as well as the fabric has been purchased, you can begin to take measurements and sew.

Taking measurements from the sofa

You can sew a beautiful sofa cape only when using a high-quality pattern. It is possible to carve out a cover according to the size of the sofa only with the correct measurement.

Taking measurements from the sofa

You will need a measuring tape to take measurements. Use it to measure the sofa at its longest and widest point. This will be the length and width. It is also necessary to take measurements of the armrests and headboards along the most protruding parts. To all the measurements obtained, it is necessary to add 10 cm for the hem and allowances for the seams. To the edges that go inward, add 20 cm each. It is recommended to provide a fastener in the center of the product, so the cover can be easily removed.

Detail patterns

As soon as all measurements are made, the results should be transferred to paper and the patterns should be drawn. Then cut out all the details on paper and attach them to the sofa. If everything fits, then you can start cutting on the fabric. To do this, the fabric is ironed and folded with the right side inward. Then the parts are laid out on the material and pinned with pins. After that, it is necessary to trace the contours with chalk and, adding 2 cm, draw a second line, along which the details are cut out.

Jacquard covers for upholstered furniture

Material Quantity Calculation

Before you sew a cover on the sofa for any of the rooms, you need to correctly calculate the amount of fabric. This stage is one of the first and most responsible. First of all, you need to measure the length and width of the furniture, and then multiply the result by two.

Microfiber sofa cover

For a more accurate calculation, after measurements, it is necessary to draw the details of the pattern on a scale, taking into account the width of the material, and also do not forget to leave allowances for the seams.

Important! If the fabric for the cover has a pattern or geometric shapes, then the material consumption increases, since you need to combine them at the seams.

Secrets of high-quality tailoring of a product

You can sew a beautiful and comfortable sofa cover with your own hands, even without certain skills. To do this, simply follow these guidelines:

For a cape, you need to choose a fabric that is not very hard, while it must be dense.
The pattern is best done a little larger than the desired size. In the process of sewing, it will be possible to perfectly fit the size of the sofa.
If there are animals in the house, then additionally seal the fabric with foam rubber.
If minor flaws were made during tailoring, as a result of which unsuccessful places were formed, you can hide them with the help of decoration.
The pattern must be done very carefully, carefully planning the tailoring and joining of the parts.
In order for the cover not to experience stress during tension, it must be made free. This product will last longer.

Do-it-yourself sofa cover for a nursery

Each time, sewing the cover will be easier, and the product will turn out more beautiful and better. Therefore, you can later switch to more expensive textiles. Before you sew a eurocover on a sofa with your own hands, the step-by-step instructions should be carefully studied. If the cape is sewn for the first time, then it is recommended to use inexpensive material.

Do-it-yourself sofa cover for the kitchen

Product decoration

When sewing a sofa cover, it can be decorated with ribbons, bows, appliqués, laces, stripes or decorative piping. Such elements will make the product individual and attractive. In addition, they can mask the flaws that appeared during sewing.

When choosing decor elements, you should consider the location of the sofa, as well as its shape. If the furniture is in the nursery, then it is not recommended to use small and hard parts. In the dining room, decor can be completely abandoned. If the sofa is located in the living room, then any decorating elements will do. It all depends on the preferences of the owner. The corners of the sofa can be additionally decorated with pillows.

Fleece sofa cover

Do-it-yourself covers for upholstered furniture can be different. It all depends on taste preferences, purpose and shape of furniture. Before you start sewing a sofa cape, you should decide on the material and acquire the necessary tools. During cutting and sewing, you must strictly follow the recommendations, showing attention and patience. Only in this case, a hand-made case will be unique and will last for a long time.

Furniture is the main component of the interior of the room. When choosing it, we are guided not only by the design, but also by the convenience of this item. However, holidays, children, pets can ruin the furniture, make it ugly. At such moments, you seriously think about purchasing removable covers for a chair or sofa. They can be changed and washed, they are much cheaper than a whole sofa. But often such covers cost fabulous money in the store, while the cost of such assistants is several times less than the amount declared by the seller. That is why many housewives know how to sew a beautiful and stylish cover on a spacious sofa with their own hands. We will be happy to reveal their secrets especially for you.

How to sew a sofa cover with your own hands quickly and easily

Some wise advice for beginners:

Purchase material with a margin. After taking measurements and choosing the fabric for the future cover, take the fabric with a margin of 1.5-2 meters. Even if you don't need it, you can make the same cushion covers.
If you are a beginner, you should not take expensive fabric. After all, if something doesn’t work out for you, it will be very annoying to throw away expensive material. Start with cotton fabrics, and if you succeed, you can move on to more expensive materials.
Even if you have been sewing for a long time and consider yourself a professional, a preliminary estimate is required.
If you still messed up with the size, do not rush to carry the cover to the landfill. With the help of simple boards, you can adjust the cover to fit the sofa, if you made it too big, of course.
The cover for the corner sofa is as easy to sew as for the usual one. The only caveat is to correctly calculate the amount of fabric needed. It can be obtained as follows: add the length and width of the sofa, and multiply the resulting amount by two. The resulting number will be the amount of fabric required for the corner sofa.

Categories

Popular