Is it possible to make a lifting mechanism for the bed. The interior of a small apartment: a bed with a do-it-yourself lifting mechanism. Video: Bed with lifting mechanism

Designs for bedrooms with a lifting device are purchased for furnishing apartments with a small area. Products are reliable, practical, budgetary, functional, ergonomic. The designs are used as a spacious block for placing bed linen and things for the bedroom. You can make a bed with a lifting mechanism with your own hands, taking into account the features of the interior design, dimensions and configuration of the room, the required functionality.

Similar articles:

Types of beds with lifting mechanism

Beds with a lifting mechanism are available with different types of opening devices, different sizes, configurations, ways of transformation.

Classification according to the type of lifting device is represented by 3 types: with manual lifting, on coil springs, on gas shock absorbers.

Fastening with twisted springs is mounted simply, reliably in operation. The cost of the mounting system is affordable. However, the springs wear out and stretch when used improperly. If several elements are damaged, you will need to change the system completely. The warranty period of the mechanism is no more than 5 years.

The lifting device on gas shock absorbers does not require physical effort during operation, providing easy access to the block for things and bed linen at the bottom of the bed. Gas devices allow you to move the stock to the open position silently and smoothly. When choosing a system, the dimensions and weight of the surface of the sleeping bed are taken into account. The devices are designed to lift voluminous mattresses. Manufacturers issue a guarantee for the operation of the mechanism for a period of up to 10 years.

Due to the lack of auxiliary elements, manual lifting of the sleeping bed (on hinges) requires physical effort when transforming the bed. However, the strength, durability of the device is great. Manual mechanisms are not equipped with systems for smooth lifting and spring devices, therefore they have a low price. To access the bedding unit, you will need to remove the mattress. In furnishing children's rooms, the mechanism is not used.

According to the number of beds, single and double models are distinguished.

Single-bed designs are compact, versatile, suitable for small spaces, allowing you to organize an additional resting place. Models are often made in the form of an ottoman and placed in the corner of the room. Single beds with a lifting device are used in the design of children's and teenage rooms. For a complete set the spring mechanism or gas shock-absorbers is used. The lifting system in narrow beds is mounted along short parts.

Double designs are ergonomic, comfortable, suitable for compact rooms and teenagers' rooms. In the unfolded position, the design provides a comfortable rest.

The mechanism in double models depends on the weight of the bed and mattress. For massive structures, gas shock absorbers are required, for light ones - spring blocks.

In accordance with the number of furniture elements to be combined, there are lifting beds with a sofa, an ottoman bed, a resting place that can be transformed into a nightstand, etc. The sleeping bed can be built into a wardrobe. The latest model is the easiest to design and assemble a do-it-yourself lifting bed.

Beds also differ in the ways of raising the sleeping bed: vertical or horizontal.

Blueprints

The manufacture of the lifting bed structure begins with a detailed study of the drawings and schemes for fastening the elements. On the sketches, it is necessary to display the dimensions of the components of the product, the methods of fastening the end, side parts, etc.

The design of the bed is a box, which is created from 4 plates and 4 transverse elements for the bottom of the frame. When drawing up the drawing, the parameters of the mattress are taken into account, the length can vary from 180 cm, the width - from 80 to 180 cm. It is necessary to determine the dimensions and dimensions of the bed, the number of beds.

Planned additional elements (shelves, drawers) are also marked on the diagram. In preparation, it is important to draw up a scheme for fastening elements with a lifting mechanism.

Tools and materials

For the design of the bed, an array of different types of wood or chipboard is suitable - chipboard, fiberboard, MDF, chipboard, OSB. The most popular sheets are MDF and chipboard. Wood boards are easy to process, reliable in operation.

For installation and assembly work, you will need accessories: self-tapping screws, confirmations, corners, edge tape, bolts, washers, nuts. The lifting device can be assembled independently or purchased ready-made.

A set of tools is required for processing wood and fastening bed elements. These are screwdrivers and screwdrivers, a jigsaw, a drill, a tape measure, a level, a furniture stapler. Also useful: a building hair dryer, a welding machine, a hacksaw, clamps, foam rubber, markers, pencils, steel strips.

Step-by-step instruction

Before making transformable furniture, it is required to determine the design features of the model, calculate the configuration and number of constituent elements, and determine the order in which the parts are assembled.

The work consists of several stages: processing and preparation of structural elements from MDF boards, assembly and fastening of body and frame parts. Then you need to mount the inset frame, assemble the structures of the lifting mechanisms, connect them to the base and place the mattress.

Preparation and assembly of MDF parts

Construction details from MDF are required to be cut out according to finished drawings. For the same elements, a template is made, according to which typical parts of the bed are measured. Sawing work can be done independently or ordered from the manufacturer, which will simplify assembly.

To mark the parts, it is required to place the MDF boards on a flat surface. Experts advise cutting a sheet of wood-based board into parts that are optimal for cutting.

Using a pencil, rulers, tape measure, the body elements are marked on the plates. Then, parts of the MDF sheet are attached to the workbench with clamps. We make wooden elements for the bed frame using an electric jigsaw.

Plates must be ennobled with a grinder and varnished. It is required to process the ends of the structural elements using an edge tape for safe operation.

Then the side tsargs, the back wall, the headboard, the transverse bar are exposed. From the outside of the corner joints, it is necessary to drill holes for confirmations. Fasteners are installed with a Phillips screwdriver. The heads of the confirmations are closed with plastic plugs, attached to PVA glue.

Inside the 4 corners of the structure, plastic corners are installed with a screwdriver. To increase the strength of the frame, a transverse board is placed, which is connected to the sidewalls using steel corners and screws.

The assembled frame is placed on its side. A sheet for the bottom is attached with screws along the perimeter of the bed. Holes are drilled in the corners in the lower parts of the frame, as well as in the center. Legs are installed in them, on which plastic supports are attached, which ensure easy movement of furniture.

Installation of an insert frame under the mattress

The reliability of the operation of the bed can be increased with the help of an additional one. The element is especially recommended for spacious models - double and king-size. The frame is made of steel profile and wooden planks. The shape and dimensions of the additional frame are designed in advance for the design. The profile is sawn into elements in accordance with the drawing, a grinder is used in the work. The parts are connected with neat welding seams.

Between the transverse and longitudinal parts at the joints, it is necessary to fix racks that will increase the strength of the structure and avoid arbitrary folding during use. Then you need to process the ends. The legs are attached to the corners of the frame, if the details are provided for by the product diagram.

Self-assembly of the lifting device will reduce the cost of manufacturing a transformable structure. The elements of the system must be with high strength indicators, since the load during operation is distributed not only on the shock absorber and slats, but also on the attachment points and fittings.

On the box, it is required to drill 3-4 openings for the system fasteners. The corners of the lifting device are attached to the structure. The base of the bed is lowered into the box. Given the location of the bottom board, holes are drilled in each side of the frame.

A gap of 5 to 10 mm is made between the box and the frame and a lifting mechanism is installed. Then tighten the bolts on the top bar. The system is connected by pistons, which are attached to the elements of the mechanism from above and below. Before mounting the device on a bed, it is required to test the reliability of the shock absorbers. There should be no squeaks and failures during lifting, arbitrary lowering of the base.

What do you do with old furniture?

A bed with a lifting mechanism is the best option for small apartments, which allows you to solve several problems associated with the improvement of the room at once. Practicality, reliability and versatility are its main advantages. It can act not only as a bed, but also serve as a chest of drawers for storing various things and accessories. Making a bed with a lifting mechanism with your own hands is not as difficult as it might seem at first glance. If all the requirements and recommendations of experts are met, the bed will turn out no worse than the factory one. In order to figure out how to do this, it is necessary to divide the whole process into several stages, each of which requires special attention.

Features of such models

Beds with a lifting device have a number of features that must be considered when making it yourself:

  • dimensions of the bed, which mainly affect the strength of the lifting device. The larger the bed, the more weight will be placed on the mechanism. According to the standards, the size of the bed is 2 meters in length, the width of a single bed is 0.9 m, a double bed is 2 m;
  • beds with a lifting device can be single and double;
  • mechanism mounting can be horizontal or vertical;
  • The height of the bed affects the capacity of the box. If the product is planned to be made on legs, then the box will be much smaller than that of a bed without them. The product without legs has another important plus, this is the absence of dust under it;
  • Do-it-yourself assembly of a product requires consistent, responsible implementation of all its stages, these are drawings, preparation of materials, manufacture of individual parts of the bed, and their assembly. On average, the manufacture of the bed will take 1-2 months, subject to the simultaneous performance of other daily duties;
  • the choice of material should be made not only from personal preferences, but also depending on the design of the room in which the product is planned to be installed.
Steel frame bed Lift bed frame diagram Lift bed design diagram
Bed Assembly Diagram

Materials and tools

Any construction process or making furniture with your own hands begins with drawing up a drawing, as well as preparing the necessary tools and materials. The choice of material begins with the base of the box. The most common and inexpensive material for the manufacture of any furniture are chipboard sheets. But other materials, such as OSB, particle boards and others, can also be used, it all depends on the preferences of the owner, financial capabilities. Next, the upholstery material is prepared, the choice of which comes solely from personal preferences and the design of the room.

The filling of the bed consists of foam rubber, sheathing fabric. Their dimensions and thickness are prepared according to the drawn up drawing.


The most affordable and inexpensive material for making a bed is chipboard.

To process the material and prepare it for installation work with your own hands, you will need the following tool:

  • level;
  • roulette;
  • pencil or marker;
  • jigsaw;
  • screwdriver with different nozzles;
  • grinder with a disk for metal;
  • welding machine;
  • building hair dryer;
  • steel slats;
  • furniture stapler.
Orthopedic base
Foundation materials
Lift transformation system

Which lifting mechanism to choose

The design of modern beds allows them to be used in rooms of different sizes, while having a suitable lifting mechanism, thanks to which the bed can recline both horizontally and vertically. In addition, lifting beds are classified according to the type of built-in lift. The simplicity and ease of use of furniture depends on it. The lifting mechanism is divided into 3 types:

  • with manual lifting;
  • spring;
  • on gas shock absorbers.
Gas lift spring manual

The manual lift mechanism is the most affordable device, because it does not contain additional devices in the form of shock absorbers or springs. Beds with such a mechanism are mainly used for adults, since when opening the box you need to make a lot of effort, children can not cope with such a load. But, besides the disadvantages, the manual mechanism also has advantages - strength, durability.

The spring mechanism is convenient to use, but its service life is from 3 to 5 years, after which it will need to be completely changed. The main cause of failure is wear, stretching of the spring. A big plus of the spring mechanism is its price, it is relatively small, due to which it is in great demand and in demand.

The gas shock absorber is the most convenient, reliable, durable mechanism. The device works smoothly, silently with little or no human intervention. The service life of such a mechanism is from 5 to 10 years, with its constant use. The choice of shock absorber is carried out depending on the dimensions of the product, the weight of the sleeping frame. The mechanism on gas shock absorbers is expensive, but at the same time in demand.

When making a bed with your own hands, a lifting device can be bought at furniture stores or ordered online. You can make your own from suitable materials. But when choosing materials, you need to take into account the fact that the load from the mattress falls not only on the shock absorbers and mechanism slats, but also on the attachment points with mounting hardware.

The mechanism is mounted in the following order:

  • first, the upper bar of the device is installed, to the basement of the box, the crate of the sleeping plane;
  • for its complete fixing, a bar is made of iron corner products;
  • assembling the next two slats will allow you to control the height of the lattice with the mattress;
  • the lower support bar is attached to the main box, it is necessary to facilitate the sliding of the hinged supports;
  • after completing the installation of the mechanism, you need to check all its fastenings.
The gas lift is mounted on a rack base
Mechanism on gas shock absorbers
Installation of gas shock absorbers

Making a lifting frame

Do-it-yourself assembly of a lifting frame consists of two main stages, these are joinery and carpentry and the processing process.

Joinery and carpentry works:

  • assembly begins with the preparation of parts for the frame, according to the drawing, in which all dimensions are indicated;
  • further, the base of the frame is assembled, this is a box of calibrated boards. The process must be carried out on the floor, to avoid distortions. To align the corners, you must use a building square;
  • the structure is screeded with metal corners, and for strength, the joints are glued with carpentry glue. During fastening, you need to pay attention to the caps of the screws, they should be buried in the wood, but not much. It is recommended to immediately process the appeared places of saw cuts from burrs;
  • in the case of a large bed, it is recommended to make a central partition along the frame;
  • the next stage is the fastening of the rails, which are screwed with self-tapping screws from the inside of the sidewalls, aligning them along the bottom edge of the box. They are needed to attach lamellas to them. The size of the rails should be within 20 by 80 mm;
  • the same slats act as slats, only their length will correspond to the width of the bed. They are fastened to support rails along the frame, in increments of no more than 15 cm. Plywood is also suitable for lamellas, but in this case, the installation of a central partition is mandatory;
  • on this, the carpentry process is over and the lifting frame is ready.

Frame processing:

  • this process involves the refinement of wooden parts with a sandpaper or a special grinding machine and coating them with varnish;
  • one of the nuances of preparing the frame is a plywood sheet, which lies on the lamellas to evenly distribute the load. Or you can lay lamellas with a step frequency of 8–10 cm.

Frame assembly
The sides of the bed are attached using corners and self-tapping screws.
Finished bed frame

Making the main frame

The assembly of the frame, like all other constituent elements of the bed, is carried out in stages. First of all, for the manufacture of the main frame, its components are prepared. Design, height, size of the backs, the presence of legs, all these nuances are reflected in a pre-drawn drawing. The main requirement in the manufacture of the product is the reliability, strength and quality of the material.

As mentioned above, any material can be used, depending on financial capabilities and personal preferences. For the box of a double standard bed (2000x1800) you will need: for the side parts - two boards 207 cm long, for the end elements you need two boards 182 cm long. They are assembled according to the same principle as the lifting frame, using self-tapping screws, corners and glue . In the assembly process, this moment is the most crucial, so before attaching the corners, you need to check that all corners correspond to 90 degrees. Excess glue that has come out must be removed immediately so that in the future it does not cause difficulties when processing the frame.

When making large beds with your own hands, in the main box you need to install a stiffener through the longitudinal axis of the product. In the case when the design of the bed provides for legs, then the last step in the installation process is their installation. The simplest version of their manufacture is the assembly of two bars (40x50) with their installation at a depth of two crowns of the bar. To strengthen the structure, you can also install a leg in the center. Having put the structure in its original position, you can proceed to its processing, clean it and varnish it.


Fastening rails for plywood bottom
Bed legs
Legs are attached to the frame
View from outside
In order not to scratch the floor on the ends of the legs, you can glue pieces of linoleum

Product sheathing

The final stage in the manufacture of a bed with a lifting device is its design, lining. Depending on the design of the room, the personal preferences of the owner, as well as banal financial possibilities, sheathing can be done using:

  • fabrics;
  • skin;
  • dermantina.

If the product was made of high-quality wood, it can be treated with paints and varnishes.

For the cladding process you will need:

  • fabric (or other selected materials);
  • construction stapler;
  • sheet foam.

Sheathing is made of the main frame and headboard. To create a small volume and airiness of the upholstery material, a pad of sheet foam rubber is made between the wood and the fabric. A construction stapler is enough to fasten the fabric, its metal staples, thanks to the spring mechanism, are driven quite strongly into the wood, and tightly hold the fabric.


Legs wrapped in upholstery
Finishing legs installation
The sides of the bed are fitted with foam rubber
From above, the foam rubber is nailed with an overlap of about 3-4 mm
Leather upholstery
So got off the board around the leg
From below, leatherette was lined with an overlap, without a fold
Upholstery corners are fixed

Making a headboard

The headboard for the bed can be made from the same material as the entire product, or you can use a regular sheet of plywood. On plywood or other material, you need to make the necessary measurements and cut out with a jigsaw the shape of the back that you like best. But you need to keep in mind that during the sheathing process it is easier to work with rectangular shapes.


A headboard is cut from a sheet of plywood
A wooden border is attached to the workpiece

The headboard is upholstered according to the same principle as the main frame, using a construction stapler, sheathing material and foam rubber sheets. With the difference that for the headboard, the skin should be more airy, so two sheets of foam rubber are laid between the plywood and the material. Depending on the design of the bed, using foam rubber and different types of material, you can give a unique look to the headboard.


foam fixing
Second layer of foam Thick batting finish
We stretch the fabric Finished headboard

Summing up, we can say that when thinking about how to assemble a bed with a lifting mechanism, you should not be afraid of difficulties, because it is quite possible to do it yourself. The main condition for obtaining a good result is the consistent execution of all installation steps, the first of which is the drawing up of a drawing, where all dimensions, the amount of material, and the necessary tools are indicated. Subject to all geometric proportions, the bed will turn out to be much better and more reliable than the purchased version. The material for its manufacture is selected depending on personal preferences, financial capabilities and the design of the room.

In small apartments, residents are faced with the issue of insufficient space for comfortable furniture for relaxing and storing bed linen. In the limited space of the room it is difficult to place all the necessary furniture: tables, chairs, cabinets, wardrobes, beds. A good solution to save usable space and create an individual interior is the independent manufacture of a bed with a lifting mechanism, which combines 2 pieces of furniture - a bed and a bedside table.

A bed with a lifting mechanism is an excellent solution for a small room.

A self-made comfortable model is not inferior in quality and design to a piece of furniture made in production conditions, and sometimes even surpasses it in performance. For those who have some skills in making furniture, it will not be difficult to make a modern functional bed with your own hands. The implementation is carried out in several stages: a sketch is created, a frame is made, a box is formed, on the bottom of which the frame is placed, a lift is installed, a pre-purchased orthopedic mattress is placed.

Advantages and disadvantages of homemade furniture

The advantages of the model with a lifting mechanism are:

  • the use of environmentally friendly materials;
  • the presence of a wide box for bed linen;
  • equipped with a convenient mechanism that makes it easy to lift the unit;
  • reliability;
  • practicality;
  • the possibility of manufacturing models of the required design, construction and dimensions, ideally corresponding to the dimensions of the allotted area for installing the bed;
  • low material costs;
  • exclusivity;
  • simplicity of design;
  • functionality: a bed with a lifting mechanism can be made built-in;
  • used orthopedic mattresses allow you to comfortably support the torso during sleep;
  • ergonomics;
  • the ability to quickly and conveniently assemble the bed;
  • the degree of wear and contamination of linen is reduced.

The disadvantages include:

  • the inaccessibility of a niche under the mattress while a person is resting on the bed;
  • production time;
  • with insufficient experience, unforeseen costs associated with the purchase of additional material due to damage to the main one cannot be avoided;
  • in the manufacture of a double model, spring mechanisms will not withstand heavy loads; gas must be used;
  • the possibility of only vertical lifting of the double model;
  • for each type and weight of an orthopedic mattress, a certain type of lifting mechanism is selected.

Necessary materials and tools, creating a sketch and wireframe

To perform a model with a lifting mechanism, tools and materials are needed:

  • screwdriver;
  • Phillips screwdriver;
  • self-tapping screws;
  • bolts;
  • welding machine;
  • jigsaw;
  • Bulgarian;
  • stapler;
  • roulette;
  • plane;
  • drill;
  • board;
  • timber;
  • lifting mechanism;
  • upholstery fabric;
  • foam rubber;
  • metal profile of square section 20x20 mm;
  • PVA glue;
  • orthopedic mattress.

First, they purchase an orthopedic mattress, taking into account the personal preferences of the owners. Then they make a sketch of the product, due to the size of the mattress. The sketch shows the composition of the bed with side and end elements. The sketch looks like a box of 4 boards and 4 transverse parts to form the bottom for the frame. When creating a sketch, the dimensions of the mattress are taken into account. The mattress for an adult has a length of 180-200 cm, a width of 80-180 cm. The fabricated steel frame will increase the performance of the model, which is especially important in the production of a double sample with a large fullness of the owners.

The frame is made of a steel profile of a square section, additionally, several transverse racks are installed in the longitudinal and transverse frame elements in increments of 600 to 900 mm. The blanks are cut with a grinder, connected by a welding machine. Vertical posts can be located at some of the attachment points of parts of the lifting mechanism. The frame-frame is equipped with a handle-ring made of leatherette.

Formation of a wooden box, installation of a lift, upholstery

This stage of work includes the selection and purchase of a suitable finished lift for the product. It can be placed at the headboard, the function of the mechanism is to raise the mattress from the side of the foot end. For single and half-sleeping models, the lift can be placed in the side panel.

Now we create a wooden box, which is a kind of container for the frame. Work is underway to cut the side walls and bottom of the model to the required dimensions, wood, chipboard, and a jigsaw are used. The ends are connected by corners using self-tapping screws, or a spike is made with PVA glue, while it is necessary to check the diagonals. The box is ready. A frame is placed in it. Now the lifting mechanism is mounted, its function is checked, if necessary, corrected.

Finishing the outer surface of the side walls of the model is the final in the manufacturing process. Used upholstery fabric, leather, leatherette. Upholstery is done using a furniture stapler. Laying foam rubber between wood and upholstery creates airiness, the necessary volume. Finally, an orthopedic mattress should be placed on the bed.

A unique bed, equipped with a block lifting device, contributes to a good rest, becomes a functional piece of furniture, and participates in the formation of an individual interior style.

Click Class

Tell VK


A bed is always associated with the pedestal of the recreation area. A good one that will allow the body to rest and the muscles to relax. By the way, I already wrote an article about mattresses, there are also a lot of interesting things there. So, when choosing a bed, we are faced with very important questions, roughly indicating what it will be like. Now we are talking about a family double bed. In market conditions, we will find models with a lifting mechanism and drawers, forged and wooden, or a loft bed. But you can make a double bed with your own hands, the main thing is to correctly understand the process of work. So let's talk below on such a capacious and pleasant topic.

My family lived for some time in a one-room apartment, we had a small child. Of course, like most of us, we rested on the couch, as a result, sometimes in the mornings the neck did not turn, and even with regular full use, our sofa pretty quickly lost (thanks to my daughter!).

At that moment, we just dreamed of our own bed - comfortable, with storage space. I even visualized how our bedroom should be furnished, what furniture would be. Well, the long-awaited moment has come when we have our own bedroom. I had already forgotten about those fantasies of mine, but questions about creating coziness and comfort remained. First of all, we started measuring the room and trying to figure out what size we want our bed. It turned out that the Soviet 1.40 m is not enough, and 1.8 m does not fit into the dimensions. So, this issue has been resolved - we order a double bed measuring 1.6 * 2.0 m.

Always measure the length of the bed as follows: the height of the tallest member of the family plus 20 centimeters, at least.

We are well within this, tk. in terms of height, we are high middle peasants!

If space permits, then of course you can make the dimensions of the bed larger, but the question of whether you can find a mattress without pre-order and bed linen remains open.

Yes, and in a normal family, no matter how big the bed is, anyway, mom will be cramped: both husband and children will snuggle up!

Also, for a comfortable sleep, it is better to choose a bed with slats or an orthopedic base. They allow air to circulate through the mattress and create natural ventilation and allow the mattress to last longer.

Well, and another important question: what will your bed be made of? My friend, for example, considers everything except the array to be a lower caste. And a bed for two hundred thousand made of solid oak for her is the norm. It's good when it is, but there are those who, even with the availability of funds, prefer other materials. So, there are many lovers of wrought iron furniture. Such options are also not standard, but look very elegant and self-sufficient.


Many now choose modern models of double beds with a soft headboard and covered with eco-leather or velor. These are also very beautiful options and there is no doubt about the service life here either.


Yes, and materials are now often impregnated with dust-repellent compounds, and eco-leather has a “self-healing” function, so neither animals with claws nor children with scissors will spoil its appearance.

What are double beds: with a lifting mechanism and with storage boxes

For every hostess, additional storage spaces are important. Now this is also solved with the help of underbed space: the presence of a lifting mechanism or drawers.

I do not argue with those who believe that a lot of dust accumulates under the bed and therefore it is better not to store anything there, but also not to disappear in a hidden and empty place.

So the designers thought of equipping the base of the bed with lifting mechanisms. Often in such secluded places they put things that are either not needed at all, but it’s a pity to throw them away, or they are needed very rarely and in season (skis, sleds, winter jackets).


And from such a hard-to-reach place, they have now made a convenient place for storage. When buying a bed with such a mechanism, ask the seller how long the mechanism is designed for, usually it is written in the number of lifts. If, in your opinion, the mechanism is flimsy, then it is better to look for a better and more reliable one. You don't buy for one year though.


For me personally, boxes have always been the most convenient option. And so we equipped our bed with them. The only point is that the length of the guides is no more than 60 cm, so part of the under-bed space is still lost.

For small apartments, such drawers can be just a salvation, and in small bedrooms they can even replace a closet.

I will share a photo that captivated my husband and we discussed for a long time how to complete the existing bed with additional drawers with our own hands.


I will say that using imagination, you can make such a double bed, which, in addition to the function of a place of rest, will also perform others.

Do-it-yourself double bed made of wood: drawings with photos and work progress

I know people who, when buying any thing, click their tongues and say that it is not worth that kind of money. Therefore, I decided to make an additional item on creating a double bed with my own hands. There are several options, but consider one.

So, you need to buy boards and bars. Dimensions are shown in the photo.


Two boards for the sides of the bed, which you buy based on your measurements. At least three pieces of about the same length, they will hold the base with the mattress on the sides and in the middle.

Two legs of 70 cm at the head and two legs of 50 cm at the foot.

Three or four boards with the size of your width. One of them will close the footboard, and three (or two, if you wish) will become the head of the bed.
Prepare all materials, peel, sand, saw off to your size.


For fasteners, you will need the following types of corners, shown in the photo.


The next step to the frame is to drill two side bars that will hold the base with the mattress, and one bar in the middle to stiffen it.



Well, it remains to put the frame on the legs and attach the headboard.

For craftsmen, this is only a blank, it can be painted, varnished or covered with material. It all depends on your imagination.
On the bars, which are intended for the base, we put plywood or lamellas.

There is another option. Look for a company in the city that manufactures furniture and ask her to cut you. This is available in many localities.

To do this, I give several diagrams and drawings.


You also order a chipboard sheet from them, give them a drawing.


There, they will cut and close the details for you. It remains only to bring home and connect all the parts. This is for those who want to save money, but there is not enough time to create a completely hand made one.

Modern ideas for double beds (attic, with upholstered headboard)

Bed - the attic is made in apartments with a fairly high ceiling. It allows you to save space and allocate space for work or living areas. Of course, it is always fenced with boards to protect sleeping family members. Not for everyone, however, these are plans. To be honest, I have not yet seen such apartments in our city - a million people, in order to comfortably place the second tier, without hitting my head against it.


 Loft bed

But the idea itself is very modern and great for active young people with a good imagination.

But, I think, the dream of many. There are options when she is put away in a closet or a full-fledged sofa is formed in her place. But her cost can be biting for owners of lorries and studios. But what an idea!

Another trend is a white double bed. Snow-white furniture in a light and airy environment looks weightless and light. But there may be other options, for example, the use of contrasting white colors.


Also, a white bed is suitable for all interior styles: for Scandinavian and minimalism, a great option for art deco and classics.


Double beds with a soft headboard flooded the Internet. After all, not only the headboard is made soft, but the entire wall is determined for it.


Manufacturers already have a special line in the price list reserved for soft panels.

Everyone dreams of having a comfortable and beautiful bed, but for small-sized housing it is difficult to choose a model that would simultaneously meet all these requirements. Here it is important to rationally use the limited area of ​​​​the room, so you should pay attention to the option with a lifting mechanism. Self-assembly of a bed with a lifting mechanism according to the instructions on the video is a completely affordable process.

The presence of a comfortable bed allows a person to get enough sleep and recuperate before a new day. If the bedroom is not large, do not be upset. It is enough to choose a bed with a lifting mechanism, which is characterized by compact dimensions, high comfort and original design. Moreover, the cost of such furniture can be different, so you can choose an option for any wallet. And to save even more, it is worth analyzing how professionals assemble such structures and do the same.

The scheme for assembling a bed with a lifting mechanism is quite simple, but first you should find out the main advantages of such furniture. Products of such a plan provide a person with comfort during rest and sleep, but at the same time they do not take up much free space in the room. The lifting mechanism is mounted on a capacious box, inside which you can store bed linen, bedspreads. Thus, with a small area, you can solve the problem of storing bedding. For these reasons, beds with a lifting mechanism are so popular among owners of small city apartments.

For self-assembly of such a design, you will need the following tools and materials:

  • hardware;
  • a set of screwdrivers, a cap wrench, a screwdriver;
  • wrench;
  • yardstick;
  • building level;
  • a hammer;
  • a sheet of paper, a simple pencil.

Thus, the work does not require expensive equipment or rare tools, which greatly facilitates the preparatory stage.

Assembly steps

The entire assembly process consists of several important steps:

  • installation of the box and base;
  • fixing legs if necessary;
  • installation of corner ties;
  • installation of the lifting mechanism;
  • installation of a traverse;
  • installation of the frame and mattress holders.

The instructions for assembling a bed with a lifting mechanism indicate all the work processes. At the first stage you will need:

  • remove all elements of the future design from the packaging film, inspect them for defects. If one of the elements is defective, it will need to be replaced. A frame with cracks is unlikely to be reliable and safe for sleeping;
  • lay out the drawers for their intended purpose on the floor with the side with holes up;
  • connect the drawers to each other with the help of fasteners, and then hang the head of the bed on the box assembled with your own hands;
  • to fix the individual structural elements into a single whole, you will need to use a screwdriver and screws.

Note that in some models, power elements of a longitudinal nature can be used. For example, one-piece longitudinal ties, as well as corners or brackets that are fixed to the frame with screws. This is important to take into account in the process of work.

Case assembly

For ease of assembly, the Selena bed frame is made of semi-assembled blocks:
1 - Front part, 2 - Headboard, 3 - Left plank, 4 - Right plank, 5 - Crossbar, 6 - Longitudinal plank.

Leg mounting

The supports of the structure are fixed on the frame using special platforms located on the longitudinal elements themselves, or screwed separately onto the sides. Then they attach shelves, corners in the upper part of the tsarg. Some bed models do not have free-standing supports, instead of which a one-piece side frame is used.

Experts insist that it is not worth pressing the screws right away, because in the future it will be necessary to align the sides, shelves, corners in a perpendicular plane. The lifting mechanism is fixed in the next stage of work.

Installation of corner braces

This process is carried out after attaching the supports to the bed and is necessary to make the structure more reliable and stable. Each of the corner ties consists of 5 parts:

  • the screed itself;
  • 2 futorok;
  • 2 countersunk head bolts.

To work, you will need to use a 10 mm drill, a screwdriver, a hexagon or a hammer. If it is necessary to disassemble the structure, the presence of a screed will allow you to easily disconnect the parts from one another.

Corner brace

Hoist attachment

At the next stage of work, it is necessary to install and fasten the lifting mechanism to the bed. It is extremely important not to make a mistake when placing it and determining the sides, because otherwise the smooth operation of the mechanism will be disrupted. This will require:

  • fix the bed frame on the lifting mechanism. Use screws for this purpose. Before tightening the fasteners completely, be sure to align the gaps between the frame and the base;
  • Specify the required level of force to control the model. Installation of the unit in the lifting mechanism should be done by hand with the cylinder up, using nuts with a retaining ring, fluoroplastic washers;
  • tighten the nuts until they stop, and then slightly loosen the fastening, leaving a minimum play. The operation of the lifting mechanism should be checked several times.

Hoist attachment

Installation of the frame and mattress holders

It is worth installing comfortable handles on the bed frame for trouble-free control of the structure, as well as a limiter for the mattress. All work must be completed by mounting the bottom of the bed and putting on a cover on its perimeter.

If the base consists of lamellas (from 15 to 25 pieces, depending on the model), they will need to be hammered into special holders with a hammer. Each lamella is fixed on both sides, so the process may take some time. Now you know how to assemble a bed with a lifting mechanism, so this task will not cause difficulties.

Installation of slats

Possible difficulties

Of course, professionals with extensive experience in assembling various kinds of furniture can easily assemble beds with a lifting mechanism. But newcomers to this business may experience some difficulties, which can be found in the table.

Possible difficulties Solution
The need for drilling holes Holes for fasteners will need to be made in different parts of the structure. It is especially important to properly organize them in the headboard for its secure fixation on the frame. To create holes, you will need a screwdriver, and the headboard is fixed with screws.
Assembly and installation of gas lift The installation process itself is quite complicated, so you need to do the work without haste, carefully, consistently. It is important to observe symmetry in work, adhere to safety measures.
Mistakes in marking the bed frame An error at this stage will nullify all efforts, so you should read the assembly instructions from the manufacturer of this model in advance. You can also ask for the opinion of experienced furniture makers.

Remember a few more important points.

Fitting © 2022 Design and interior of apartments