Partition for zoning a room with a door. What are partitions for zoning space in a room? Option ten. Forged structures

When there is a need to redevelop a single room or apartment as a whole, decorative partitions can come to the rescue. Since they not only perform an aesthetic function in the interior, but also serve as an excellent tool for zoning. The original layout could have been extremely unfortunate: small rooms were claustrophobic, and large ones were too uncomfortable, too spacious. In such cases, partitions allow you to rationally use the usable area and correctly delimit the space. And the design implementation of these practical products guarantees the transformation of the interior beyond recognition. Sometimes this is the only correct decision that the owner of the house can make in order to achieve comfort. Next, we consider the main characteristics and options for their application.

The use of decorative products in a modern interior

The choice of suitable decor elements directly depends on the room to be decorated. Based on its parameters, functional tasks and general style, one or another type of decorative partitions should be selected. The shape of the products must also take into account the features of a given space.

Among the advantages of using this decorative element are noted such as:

Aesthetics and originality of execution;
A wide range of materials used;
No restrictions for design ideas;
Long service life;
Ecological aspect.

The disadvantages include poor sound insulation or the relatively high cost of some models. Depending on the layout, there are two main types of decorative partitions in the interior:

Partitions for room zoning;
Interroom partitions in the interior.

Partitions can be sliding (rotary) and stationary. The former are often used as interior compartment doors on roller rails.

The use of partitions depending on the purpose of the rooms

Living room

The multifunctionality of this room puts forward its own requirements for the organization of space. Since not only a festive reception of guests is held here, but also often a family dinner. All family members gather to discuss each of their interests. Therefore, it is necessary to fully satisfy their potential needs. It is even possible to use several decorative partitions.

Before installing the product, you need to make sure that the place for its placement is chosen correctly.

It is recommended that you read articles on modern interior design, where various options for zoning rooms can be offered. The arguments that are given there may affect further planning. For example, you can separate the dining area and a place to relax with an elegant screen or a stylish glass partition. The use of specific materials should focus on the living room, a kind of furniture set.

Another option to place many different accessories, flowers or books can be a decorative partition - a rack. The comfort that it can provide allows you to fill the modern interior of the room with real comfort. A similar effect can be achieved when used as a partition - decorative,. Since his sides will be open to both zones, he will be able to complete the difficult task of decorating each zone while leaving them separate from each other.

Bedroom

Often, in small apartments you have to combine. The lack of space sharply affects the general feeling, which leads to the impossibility of both rest and fruitful work.

The use of decorative partitions helps to solve this problem. A screen of various shapes allows you to provide privacy for each member of the couple.

Kitchen

The main function of the partition in this room is to distinguish between places for cooking and eating. Partitions in the interior of the kitchen stylishly ennoble, at the same time allowing you to improve the practicality of the cooking area.

A wire screen on a wooden frame seems to be very convenient in operation. It is used to place kitchen accessories, while maintenance with galvanized material is extremely simple. Such a decorative partition can have a variety of forms.

Children's room

It will require a division into three functional zones: for recreation, study, as well as a playground. Such zoning allows you to leave the mess in the place provided for this. The other space will be used for practical educational purposes. Often, for such an organization of the interior, a decorative box-shaped partition is used in order to additionally be able to fill it with something useful.

The main types of decorative partitions in the interior

Decorative partitions in the interior, designed for zoning a room, allow you to radically change the perception of space with minimal means. At the same time, the achievement of the desired effect does not imply the destruction of the wall or ceiling surfaces of the room.

Only partial dismantling of the floor covering will be required. The parameters and shape of the designer product are selected according to the taste of the owner, since there can be no significant restrictions here. A partition for zoning a room may or may not exceed the height of the smallest member of the family. The same is true with width. As for the selection of material, we will consider further the existing types.

Drywall

With the help of this material, almost any fantasy can be realized, since their installation or dismantling does not involve absolutely no difficulties. Drywall products are characterized by low weight, lightness, which determines the methods of their application. The surface finish of such a partition can be very different.

The demand for this type of decorative element is due to the fact that it allows you to reliably hide engineering communications and is fire resistant.

Brick

This traditional material is also very popular. It is usually used where it is impossible to do without stationary partitions, since the dismantling of this type is characterized by its obvious laboriousness. The design properties of the noble material are perfect for a variety of interior design styles (country, Provence, etc.).

Wood

Wooden partitions are perfectly combined with any style of the room, with the exception of frank hi-tech. Often they are the main element of decor, attracting all the attention of guests. Carved, perfectly polished product made of natural wood elegantly decorates the interior.

The material for the frame of a particular structure can be both boards (timber) and MDF. Finishing involves the processing of natural material with paint and varnish solutions. After this procedure, the wooden partition will be distinguished by its reliability and strength to mechanical stress. Among the disadvantages of using the material are called fire hazard, as well as the inadmissibility of excessive moisture.

Glass

The disadvantages of this type include the obvious need for regular wiping of the glass plane, as well as the inability to hide engineering communications in a decorative element. However, the aesthetic side of the material compensates for this shortcoming.

It is possible to apply patterns on glass, as well as photographs.

Glass is used both for stationary partitions and as a sliding screen. The advantages of using this material include the absence of obstacles to the passage of light, resistance to changes in humidity and temperature, and durability.

Textile

When a solid partition is not required, fabric partitions (curtains, drapes) are used for zoning rooms. Features of the material suggest both rotary and sliding partitions. For this decorative element, you will need to install a special cornice with guides under the ceiling.

The use of this design allows the canvas to easily slide and delimit the space of living rooms. In the bedroom, a fabric screen makes it possible to retire, and in the living room.

Rack

Metal forging

For this decorative element, a certain approach is required, since it will look subject to a specific style of room design.

You can name such interior design options as modern or art deco. Forged metal is used when necessary in one of the sections of the room. Polished steel - when the design belongs to the high-tech style.

Making decorative elements with your own hands

Partitions can be made with your own hands, but without the right tools it will be extremely difficult. Plasterboard material seems to be simple for making a decor element. For example, consider the procedure for creating a stationary partition to divide space into zones.

Markup. A drywall profile up to 5 cm wide is laid on the floor, after which it is circled with chalk. The workpiece is attached at a distance of one cm from the outlined line;
In the same way, the markings for the racks are carried out;
A profile about 2 m high is fixed to the wall with self-tapping screws;
Temporary jumpers are marked for further installation of shelves;
The frame of the proposed design is sutured (width up to 25 cm is recommended). To do this, whole sheets of drywall are carefully cut from each side. The rest will then go to trim the ends;
The perforated corner is fixed with a stapler;
Finishing is carried out in two stages: reinforcing, then finishing.

Subsequently, the finished design of the partition can be decorated at your discretion.

Unusual luminous screen of branches and garlands

Conclusion

The use of designer products in the interior is often due to the need for functional space zoning: whether it is a stationary partition for zoning a single room or the installation of sliding interior partitions. However, they can also be used as purely decorative elements to enhance the aesthetics of a space.

Interior partitions do not perform load-bearing functions. Their main purpose is the formation of the internal space of the apartment (dividing it into separate rooms and other premises). In addition, partitions perform the functions of sound and heat insulation.

Types of interior partitions

Depending on the design features, all partitions can be divided into two types:

Whole partitions;
. frame partitions.

Solid interior partitions

Solid interior partitions can be built from gypsum concrete slabs and blocks, as well as laid out of brick (the width of such an interior partition is half a brick) or made from wooden lumber. In the design of frame-type interior partitions there is a frame, the internal space in which is filled with some material (aggregate).

Interroom partitions of frame type

The construction of frame-type interior partitions begins with the installation of the frame. As materials for the construction of the frame of such a partition, a steel or aluminum profile, a profile made of polymeric materials (in particular, PVC), and a wooden bar are used. To fill the frame space, sheets of drywall or polymer materials are used. As a filler, plywood sheets, plain or eurolining, as well as other materials available on the market, can also be used.

The choice of materials for the construction of interior partitions

Gypsum-concrete and brick interior partitions have considerable strength, which makes it possible to further fix hanging furniture or other heavy objects on such a partition. However, their construction and subsequent finishing require significant labor costs. If the partition is planned to separate a room with high humidity (for example, a bathroom or shower room), then the use of materials that do not have a sufficient degree of moisture resistance is inappropriate. So, in this case, it is undesirable to use drywall. Wooden interior partitions meet the highest environmental requirements. The tree is easy to process and has sufficient strength, and after finishing it, the whole room takes on a very attractive appearance. However, its disadvantage is low fire resistance.

Which partition is suitable: transparent or not

Partitions are divided into two types: not transmitted light and transparent. Transparent partitions are made mainly of glass. As materials that do not transmit light, opaque partitions use wood, plywood, aluminum, fiberboard, MDF and PVC.

Most of all, of course, stationary partitions are popular: frame, frameless and modular. Transformable ones are also used: sliding or folding. There are also furniture and mobile (for example, screens). When deciding on the installation of a stationary partition, especially a frameless one, everything should be carefully considered. Since, during installation, and, subsequently, during its dismantling, it will be necessary to violate the integrity of the coatings on the floor, walls and ceiling. The frame partition, on the other hand, provides for the manufacture of a structure in the form of a frame on which the material of the partition itself, for example, drywall, will be mounted.

Such large-scale and serious decisions will not be forced to be made - transformable room space dividers. As already mentioned, they can be folding or sliding. Their convenience is that such a partition can be pushed in or folded in case of uselessness.

Pieces of furniture can also serve as zoning space in the room. It could be a closet or shelving. And it is not necessary that this furniture be floor-to-ceiling high. Well, and, probably, the most convenient is a mobile partition. It can be both pieces of furniture (shelving on wheels) and other items adapted to this purpose.

Partition for room zoning - screen

The simplest and most commonly used type of partitions is a screen. In construction, the screen is used as a mobile partition.

Office at home using a partition

Office partitions can be both opaque and translucent, installed not up to the ceiling. They can be made of a frame made of aluminum or plastic. Filling material is mounted in the frame - glass, solid wood or aluminum sheets.

For zoning an office space or creating separate jobs, blind partitions are installed up to the ceiling. They are made with increased sound insulation.

Materials for mounting interior partitions

The main advantages of interior partitions are the speed and ease of installation, they can be completed even in one day. Alternatively, you can order a ready-made partition and hire specialists who will quickly and efficiently install it. You can install the finished product yourself.

Brick partitions

The traditional and most common material, as it always remains a popular and high-quality type of building material. In the interior of a small room, a brick partition will create the appearance of a heavy, oppressive curtain wall, so they are usually mounted in large and spacious rooms.

Glass partitions for room zoning

Natural and irreplaceable type of material, which is equipped with high quality and aesthetic properties.

Room partitions made of wood or drywall

This type of material is suitable for any interior, and will create a special attraction of the room. The partitions separating the rooms are made in the form of deaf structures made of wood or drywall. Such designs are very light, they can be installed anywhere. In addition, sliding doors in the form of a sliding wardrobe can be mounted in such partitions. It is also possible to make sliding partitions themselves.

Ceramic tiles 3d for zoning

Wrought iron partitions for rooms

Metal products for partitions are made in the form of forging, solid decorative sheets or in the form of facing brick partitions. But a metal sheet is more like a screen and serves as a decoration element in the interior.

When choosing this method of dividing the space of a room, it is difficult to determine the installation location of such a partition. If the living room has two windows, then you can get by with installing a small jumper between them so that the light properly illuminates the enclosed space. And for a room with one window, you can install a partition that could be bypassed on both sides. And the light from the window would be distributed equally to the enclosed space and to the rest of the room.

The frame of such a partition can be made of a wooden beam or a special metal profile. Reliable fastening of the frame to the floor, ceiling and, if necessary, to the wall is important. Since drywall is a fragile material, the frame must have horizontal and vertical crossbars. And if you approach the work creatively, making niches and lighting in the partition, then such a partition will create additional conveniences.

Room zoning - wardrobe, rack

Undoubtedly, many have a closet that does not quite fit in the space allotted to it in the room, or even stands quite uncomfortable. So he can become that very partition in the living room. It just needs to be rearranged as needed. And the best option in this case would be a through rack without a back wall. By installing it as a partition, it will be possible not to disturb the illumination of the room as a whole. And installing a partition from a modular rack, which can be rebuilt from time to time into the desired shape, will be an interesting and creative solution.

Partitions for zoning a room - photo

Sliding partitions for zoning space in a room are one of the options for transforming the interior by creating separate zones. Modern designs are becoming more refined and perfect. This also applies to the materials for their manufacture, and to the fittings responsible for smooth running, and, in fact, to the shape and finish of the canvases themselves. Light and airy sliding systems can not only create clear boundaries, but also dissolve them in the living space.

Sliding partitions for zoning the space in the room: a convenient divider

Mobile sliding partitions can create a new or change an existing planning solution for a house, apartment or a separate room. Moreover, such a design trick is equally suitable for both small apartments and for housing of significant dimensions. There are no specific rules for the use of various design options, but their use in design is always fresh, non-trivial, beautiful and functional.

Most often, additional isolated zones are created through room sliding partitions. They can be used when it is necessary to divide a large uncomfortable room into compact parts, hide the entrance area, protect a sleeping place or a kitchen working area from view, and in large areas they can be implemented as movable walls. But no matter what function they perform, they are united by a number of important advantages:

the ability to install structures not only at the stage of repair, but also in the repaired premises;

ease of installation and, if necessary, the ability to quickly reinstall partitions;
saving space in the room;
aesthetic and presentable appearance;
unlimited decorative possibilities;
variety of used materials, forms, sliding mechanisms, styles;
the installation of sliding partitions does not require approval from the regulatory authorities and registration with the BTI;
installation does not require special skills and can be done independently.

Example with a sliding partition

Useful advice! If you are going to install a sliding partition in the room, consult with the designer so that instead of a stylish divider, you do not get only a hindrance to light and movement.

The only negative characteristic of all types of sliding room partitions is the lack of soundproofing function. In view of this, their role is reduced more to the visual delimitation of space.

The value of sliding partitions for space zoning

There are many circumstances when it is necessary to divide a living space into small separate zones. It can be a small area of an apartment in which a large family lives, where everyone wants to have a cozy personal space. Or you need to visually beat a narrow and long room. Or it may be that a room that is too large needs to be divided into functional zones. For all these cases, you can use sliding partitions in the room.

Installation of a sliding partition between the kitchen and living room

If, after redevelopment, the kitchen and living room have turned into a single whole, one of the options for skillful division may be to install a sliding partition between these two rooms. In the closed state, the partition will hide the cooking process and temporary mess on the work surfaces, in the open position - the kitchen - will turn into a spacious dining room, where everything is at hand and you can quickly handle the serving.

Partitions with a roller mechanism can act as a sliding system in the combined kitchen-living room - they have a fairly easy move and are able to withstand a considerable load in the form of numerous openings / closings. The absence of a guide rail from below in such a system preserves the integrity of the floor covering, which is only welcome, since the overall design of the room is maintained.

Partitions-"accordions" will look original, in which they use a combination of swing and sliding opening methods. Given the small thickness of the canvases, when closed, such partitions do not take up much usable space. Often the line of demarcation of the kitchen area is made out with a partition, the design of which is called a cassette. It should be noted that such a model should be provided precisely at the stage of repair work, since it will be necessary to equip a special niche for the web to run.

If transparent glass or plastic is used as a material for the partition wall, the space of the combined premises will turn out to be visually open and large even when closed. The content of the sliding system should be selected based on the style of the overall interior of the apartment. Modern trends are characterized by combinations of aluminum and glass, wood, bamboo and other natural materials are suitable for classic solutions.

Sliding partitions for room zoning: multiplication by division

The main inconvenience of Khrushchev apartments is the unpretentious layout and the small area of the rooms. Having a comfortable personal space is one of the main human needs. At the heart of any redevelopment decision is the competent division of the apartment into functional zones. The use of sliding partitions for zoning will help to avoid global restructuring.

Related article:

How cork wall panels are made. The main types of cork coating, its pros and cons. Tips for installing cork panels. Cork wallpaper in the interior: photos and ideas.

In a well-planned cozy interior, first of all, there should be a place where each of the family members will be calm and comfortable. And do not be upset if there is no free separate room in your house for this. You can organize your personal space without it by arranging a separate office or a quiet sleeping place, separated from the common space by a light matte sliding partition.

The cause of discomfort does not always lie in tiny square meters. If the room is spacious, and a family of four lives in it, the allocation of individual zones using sliding partitions in the room will also be appropriate. However, dividing one room into two or more, you always have to sacrifice a window. In this regard, you should think carefully about which part of the secluded corner will be without a window.

Useful advice! You can visually increase the height of the premises by installing a sliding structure from floor to ceiling.

The zoning technique works great in children's rooms when it is necessary to allocate separate places for study and entertainment. And if there are two children in the family, zoning will help to arrange a personal space for each of them in one room. Numerous photo examples of delimiting space using sliding partitions in children's rooms will become a kind of guideline for creating a comfortable interior for your little household.

Partition design in the room: photos of impeccable solutions

There are dozens of options for using partitions in a room to delimit space. If you are not quite sure of your design abilities, use the photo of the partitions in the room as a sample. Numerous options for successful ideas for the use of structures will become an example for creating a unique and most comfortable interior.

Useful advice! When arranging openings for installing interior sliding partitions, the value of vertical and horizontal deviation should not exceed 3 mm.

When using sliding systems, decorative finishing of openings is important. Borrow ready-made examples of matching the decoration of the opening to the existing style direction. If there is a modern minimalist style or a high-tech line, then, in most cases, the opening should be left unframed and designed identically to the walls. For such cases, the installation of guides is carried out flush with the ceiling surface.

Traditional stylistic trends are characterized by the use in the design of the opening of the same materials from which the canvases of sliding partitions are made. You should order a ready-made kit for decorating the opening along with a sliding system. The photos posted on the network illustrate the use of an appropriate decorative cornice to mask the mechanisms of sliding systems.

The available photos of glass sliding doors and partitions will help you decide in which cases you should choose frosted, transparent or stained glass. Examples of design-seasoned use of sliding partition models for transforming a room will help you choose an option that will not overload the interior with an inappropriate design.

Used materials for sliding partitions in the room

Modern sliding structures for zoning have a variety of designs, a wide range of materials used and a rich selection of patterns and canvas patterns. The frame for canvases is made of wooden beams, metal and plastic profiles. For canvases, plastic, various types of tempered glass, as well as numerous options from their combinations are used.

It is worth noting that the glass used in partitions can have a large selection of ornaments and patterns. Glass filling can be done by artistic matting using sandblasting technology or laser engraving. Very often, a combination of frosted and clear glass is used, or a photo print is placed between two glass surfaces.

Partitions are unique, specially designed by designers for a specific style of the room. They can use the most elegant materials, original technologies and curvilinear configurations. Exquisite stained glass models amaze the imagination with complex patterns and framing of wrought metal and bent wood.

Useful advice! When installing a sliding partition in a children's room, make sure that it is made of safe materials.

For adherents of environmentally friendly materials, manufacturers offer options for partitions with the maximum use of wood, as well as bamboo, leather or painted textiles. As for plastic, various types of polymers and plexiglass are used for sliding partitions. Such designs are light in weight and ideal for decorating borders in small rooms.

Glass sliding doors and partitions: product prices

Many domestic and foreign manufacturing companies are engaged in the production of sliding structures. The assembly is carried out on behalf of the client-customer, previously familiarized with the product catalog in electronic form. Before you buy sliding partitions for zoning a room, you need to come to a showroom or a company representative office in order to see the model in reality.

The cost of sliding partitions and doors is formed taking into account the material for the canvas, the mechanism used and the installation of the structure. The price is also affected by the popularity of the manufacturer and the version in which the models will be performed: standard or individual. It should be borne in mind that the lead time for an order can be up to 3-4 weeks if the design is of a domestic manufacturer, and up to six months if the model is imported.

Installation of sliding doors can be performed both at the stage of repair work, and in an already renovated room

The price of a sliding partition model Diana 2 with two canvases made of frosted glass with a diamond engraving measuring 0.95 x 2.1 m is 46,500 rubles. The design uses a suspension mechanism. The model is equipped with a decorative overlay and is ready for installation without purchasing additional elements. The product is guaranteed for 12 months. Estimated production time is 4 weeks.

The Waterfall series will cost from 43,600 rubles. for a complete set. Doors can be fixed both to the ceiling and to the wall. The manufacturer provides a choice of about 200 profile shades, up to 10 types of glass, 15 opening methods, about two dozen types of fittings. The design uses tempered glass 8 mm thick. The maximum height and width of the paintings are 3.2 and 1.5 m, respectively.

Sliding type installation does not require approval from the regulatory authorities and registration with the BTI

In order to make it convenient for the buyer to navigate the size and weight of glass sliding doors and partitions, many companies place special calculators on their websites to calculate the size of the canvas and the weight required for glass. These data will be useful when choosing a sliding mechanism. Prices in online stores are for informational purposes and are subject to clarification from the company manager when ordering.

Assembling sliding partitions with your own hands

There are many options for the design of sliding systems, made independently. You can make a small light sliding partition with your own hands from a door leaf, the design of which implies such an application. To do this, instead of a hinged device in the form of loops or canopies, the canvas is equipped with a roller mechanism. If the height of the door is not enough, you can assemble a lintel of the appropriate width from the profiles.

Guides and fittings can be purchased at any hardware store. When choosing a roller mechanism, steel rollers should be preferred, since analogues with a rubber coating quickly fail. You can use both built-in and mounted mechanisms. The latter option requires utmost care during installation, as it is a visible element.

One of the options for making a partition with your own hand is assembly. Its design consists of several frames and a number of thin canvases interconnected by loops. For the manufacture of the frame, you can use a PVC profile, and any suitable type of sheet plastic or vertical lamellas from the same material is suitable for filling.

Adding zest to the interior, you can make a frame frame of a screen made of wood, and use dense textiles or rattan weaving to fill it. Partitions look unusual and stylish, filled with canvases with unusual prints. Having shown imagination, you can independently make a unique model that will emphasize your taste.

For zoning a room with a large area, two types of partitions were used - and a curtain-partition made of fabric

An example of self-manufacturing of a sliding system can be doors made according to the principle of partitions from a wardrobe. Work can be minimized by ordering finished canvases in the workshop. In this case, it remains only to independently attach the guides and hang canvases with a roller mechanism on them. Those who have the time and certain skills can assemble the design of the canvases exclusively on their own.

Using sliding partitions to delimit the space in the room, you can achieve the transformation of the interior with minimal time and financial investment.

AT zoning living space laid the deep meaning of human existence. We want peace and quiet in the bedroom, a focused mood in the work office, cozy rest in a secluded corner. However, we do not always have the opportunity to carry out a large-scale redevelopment of an apartment or house. And what to do? Easy to assemble and easy to place, sliding room dividers are a practical alternative to a major space makeover.

Zoning techniques

The versatility of the use of sliding partitions is really appreciated by the owners of spacious apartments, and owners of modest "odnushki". A simple and practical design allows you to make significant changes in the look of your home, combining stylish decor with the necessary functionality.

In the first place in the methods of space zoning with the help of sliding partitions is the separation of the kitchen and living room.

By removing a monolithic wall and installing a movable structure that can both increase and decrease the room, we solve two problems at once - firstly, we move the partition apart and get free access from the kitchen to dining room, without unnecessary doors and narrow passages. Secondly, we move the partition walls - and restore the boundaries of the front room and kitchen.

Redevelopment! Who has not come across another rearrangement of furniture to create a new interior instead of the old boring and rather annoying arrangement of furniture.

There are many ideas for refurbishment of the territory. It all depends on the design of the room being created. Maybe the room should be expanded, or vice versa, a large space should be divided into small parts - zones. Only a partition can cope with such a task.

Partition in the room between the living room and the kitchen - photo

There are some valuable tips on how to make a room divider. Lightweight construction or stationary, built from foam blocks or bricks. Completely block the room or only some part of it. It all depends on the desire of the owner of the premises.

So, tips and the most important rules for redevelopment of rooms and installation of partitions in them.

The basic rules for refurbishing the interior of residential premises read:

Before drawing up a project for the internal re-equipment of a room, a load-bearing wall should be designated, since it is not subject to demolition, in accordance with the Rules and SNIPs.
A partition can be attached to the load-bearing wall, which does not contradict the permitting system of the Building Rules for the reconstruction of the internal part of the housing stock.

Room dividers are an excellent option for dividing rooms into functional areas. The owners of a one-room apartment are well aware of how difficult it is for one family member to work when the second person is resting. In this case, the room partition will be able to solve the issue of creating an independent workspace and recreation area.

Depending on the installation methods, partitions are created in the form of mobile or stationary room structures:

drywall;
glass, using a metal, aluminum or polyvinyl chloride (PVC) frame;
transforming.

As well as foam block, brick or wooden room walls.

“The partition, in fact, is the partition that divides the existing space into zones of different functions. The room space can be divided, either completely or partially. The thickness of the pier depends on the materials used. The standard bulkhead thickness is 120 mm. But there are also non-standard solutions, for example, if the partition is arranged at the expense of cabinets, racks or shelves, ”

says Grigory Solomin, the leading architect and interior designer of the AvKube Moscow design studio.

Plasterboard partition

The most important rule when creating a plasterboard mediastinum is to measure accurately and maintain a 90° angle. To start work, an anchor point is indicated, which is the beginning of the delimitation zone, and a line of delimitation of space is drawn from it to the finish point.

All work to achieve accuracy when performing vertical lines should be carried out using an electronic plumb or laser building level. This operation becomes more successful when such work is done together.

Attention, before the start of the erection of the wall, a control measurement of all the marked points and an additional recalculation of the computational measurements become a very important point.

The interior wall of drywall refers to the economy option. The frame of the partition is created from profiles, which are very quickly installed according to preliminary calculations. All wiring is laid inside the structure.

The bulkhead is created from drywall with a standard thickness of 12 mm. To achieve greater strength, it is recommended to lay a double layer of material on the wall, and then you can safely hang shelves, cabinets or a TV on it, having previously strengthened the inside of the frame.

Partition in a drywall room - photo

Drywall is a material with a high level of pliability. It easily responds to any modifications, for example, to create various decorative niches, as well as openings for the output of lights, sockets and switches.

Attention! When installing doors in a partition, doorways must be reinforced. The best material for reinforcement is a wooden beam.

If desired, the inside can be insulated, but not with polystyrene, but with mineral or glass wool, since rodents prefer to live in polystyrene. And it does not matter on which floor, not to mention a private house, a partition was erected. In addition to its heat-insulating qualities, mineral wool is an excellent noise insulator.

Glass partitions in the room

Creating an interior, it is impossible not to pay attention to such an element of decor as glass partitions. Their frame in a metal or aluminum profile gives a special charm to the room. Despite the fragility of glass structures, glass partitions are preferred when arranging an exclusive interior. It all depends on the parameters of the material used:

material thickness;
quality of natural or acrylic glass;
glass section size.

Glass partitions in the room - photo

You can, of course, create a glass bulkhead yourself. Such work is associated with a certain kind of physical effort and financial costs. But the result is able to fully compensate for the forces expended on installing the glass structure.

Partition-transformer

This is the simplest and most transformable mobile version of the interior walls. It is an ordinary screen, with fabric-covered sections. Or created from plexiglass frames, which are fastened together with hinged loops.

The indisputable advantage of this type of partitions is their mobility. Such a bulkhead can be easily moved in any direction, creating a temporary zone. If necessary, the transformer partition can be removed altogether, combining the space into a single whole.

Transforming walls, in addition to screens, include compartment partitions with the functions of doors assigned to them, and cabinets dividing the room space. But the disadvantage of the delimiting structure of the cabinets is that they take up a lot of space and are irrational in a small room, since the remaining living area, to put it mildly, is somewhat small.

Sliding partition - photo

The most optimal option for creating lightweight structures to delimit functional areas is a sliding or transforming screen. This design takes up little space and is very easy to operate. Most often, wooden structures are created, or transformers decorated with glass. The principle of sliding the panels of a transforming partition is similar to the compartment system and is mounted using one of two methods:

Bulkhead mounting on guides.
With suspended mounting.

The movement of the partition-transformer is carried out along special guide rails, or along the wall, when the transformer is a single integral structure. Or with the creation of a special niche, in the cavity of which the partition is completely hidden.

A few photos of interesting partitions

Some type of partitions is created on purpose, simultaneously pursuing several goals, both to create a comfort zone and to decorate the interior.

We present several photos of interesting and rather bold solutions for creating interior partitions in the interior.

Unique zonal bedroom design created from a combination of glass and wood

An interesting wall design using an aquarium as the bottom of the partition

Zoning space using natural materials

An interesting solution in the interior with the designation of the working area and the bedroom using a bookcase

Categories

Popular