What are floor skirting boards chosen for? How to choose the color of the skirting board? Plinth in the color of the floor or doors. Choice of skirting boards by color

Renovation…repair… We have already finished finishing the walls, ceiling and floor. It's time to start installing skirting boards. This final touch is so important that it is impossible to take it “sparsely”. The floor plinth not only closes the gap between the floor and the wall, but also transforms the look of the entire room. If it is chosen incorrectly: too small or in the wrong color, all the impressions of a beautiful modern renovation can come to naught. But a properly selected plinth will be able to emphasize and enhance all the advantages of finishing and design of the room. How to choose the right skirting board, what to look for, how much different types of skirting boards cost - this is what our article is about.

The choice of skirting board for the floor can be tied to three different parameters: the floor covering, the color and texture of the walls, the color and texture of the door. As an exception, some design solutions allow or even suggest choosing a skirting board that contrasts with the color of the walls and floor. To make it really beautiful, you need to have a subtle sense of taste.

If you focus on the walls in your choice, then it is better to buy skirting boards after they have been finely finished, then the resulting shade will be best seen. It will be easier to choose the right tone and not make a mistake.

When planning to install solid wood, parquet or parquet flooring, it is a good idea to order wooden skirting boards from the same manufacturer as the wood for the floor. So you can be sure that the wood species and shade will match, and the differences will be minimal.

For edging floors from other coatings: linoleum, laminate, ceramic tiles, carpet and other plinth is selected after all work with the floor and walls is completed.

Choosing a skirting board to match the doors is the most difficult option, as it presupposes an individual design solution in advance. In this case, the plinth should highlight, as a border, the door frame and the floor.

How to choose a skirting board color

According to the generally accepted rule, skirting boards are selected matching flooring. This eliminates the possibility of making a mistake and ruining the interior. Sometimes it is allowed to use a slightly darker or lighter tone. The plinth of the same tone with the floor merges with it into one whole and does not visually stand out in any way.

Modern design solutions allow you to choose a plinth matching wall color. Such innovation looks very organic and even chic if the walls are painted or plastered in a uniform color. If the walls are covered with colorful wallpaper, this option will not work.

Pick up plinth the color of the doors worth it only if they are wooden. The plinth should match the door trim and be the same thickness.

In very rare cases, skirting boards are chosen the color of the furniture or interior details.

A relative innovation was use of white skirting boards. It really can look chic, but it is necessary to take into account a lot of moments in which the combination of colors of walls, floors and furniture is not the last place. To make the choice successful, you should draw the interior of the future room in a design or architectural program and “play around” with colors.

Skirting boards in contrasting colors- bold decision. Here, too, without preliminary sketching is indispensable.

Please note that for a wooden floor, it is better to choose a plinth wooden in the same tone or a tone darker than the floor. Other options will look just ugly.

How to choose the size of the skirting board

The size for the plinth is dictated by the height of the ceilings of the room, its volume and the color scheme of the floor and walls.

You should definitely not use small thin skirting boards in large high rooms, they will disfigure and visually change the geometry of the room. Here, a wide and thin plinth is more suitable, attached exclusively to the wall and preferably in a contrasting or white color.

If the room is too small with low overhanging ceilings, thin skirting boards to match the walls will do. As if continuing them, they will visually stretch the room in height.

In standard rooms, you can use more or less standard sizes of skirting boards, from 45 to 70 mm high.

How to choose skirting material

The choice of material for skirting is completely tied to the type of flooring.

Solid board, parquet, parquet board and expensive laminate are combined with solid wood skirting boards.

For a laminate of medium and not very high quality, MDF skirting boards or veneered wood are suitable.

For a floor covered with linoleum, laminate, jute, carpet, you can use MDF and PVC plinth (plastic). You can purchase a plastic baseboard with a special insert into which you can mount a piece of carpet or linoleum so that the baseboard does not differ in color from the floor.

Ceramic tiles go well only with properly selected plastic and ceramic skirting boards.

Types of skirting boards from various materials

Gone are the days when the choice of skirting board was reduced to only one single option - wooden, standard shape, color and size. Today's market allows you to choose this element from different materials, shapes, colors, and it is even possible to order an individual curvilinear plinth that follows the contours of any decorative element in the room.

Plinth wooden

Wooden skirting boards are made from solid wood. They are absolutely natural and environmentally friendly, they are easy to fix, cut to the required size, can be repaired and dismantled. Among the shortcomings, only sensitivity to high humidity can be distinguished, which imposes certain restrictions on the premises in which they can be used. It is worth excluding the bathroom, toilet and kitchen.

The most common and cheapest material for wooden skirting boards is pine. Even the highest class pine plinth can be bought for 2.25 - 3.25 USD. And more economical options will cost 0.75 USD. for 1 m.

More expensive breeds for plinth are Linden and oak. Linden will cost at least 2.5 USD. But the price for an oak massive plinth can reach 5 - 8 USD and more.

Slightly less often they use cherry, ash, alder, maple, teak, beech, pear, walnut, birch and others.

Exotic lovers can turn their attention to products made of mahogany and ebony, acacia, merbau, dusia and others.

When buying a wooden plinth, pay attention to the class of wood and other characteristics of the product. Sometimes you can find a plinth made of pine or oak for absolutely ridiculous money - 0.18 - 0.2 USD. for 1 m. Such a low price is due to the fact that the product is not made of solid wood, but has one, two or more glues along the canvas. Sometimes the reason may be marriage or just a large number of knots.

The most expensive pleasure will be to order a plinth according to an individual project, which will repeat the contours and curves of the element in the interior. Its cost will be around $50. for 1 m.

The most correct decision would be to order and purchase wooden skirting boards from the same manufacturer from whom you ordered the floor or flooring made of wood. So you can be sure that the color is matched perfectly.

When choosing a skirting board separately in a store, it is difficult to navigate by color. The fact is that they are sold without paintwork and after applying varnish or wax, they will change their shade. In this case, you can draw a wet sponge over the surface of the untreated plinth, the resulting shade will be as close as possible to the opened varnish.

Plinth veneered

Veneered plinth also belongs to wood, but is not made of solid wood. The base is pine or spruce, and the top is covered (veneered) with wood of more expensive species: oak, pear, bamboo, walnut, acacia and others. Shades can be very diverse, so you can choose for every taste.

The price of veneered skirting boards depends on the veneer material and ranges from 4.5 to 5.5 USD.

Previously, it was impossible to stretch a cable in a wooden plinth, today plinths are successfully produced from solid wood or veneer with a cable channel.

Plinth from MDF

Such skirting boards are most often used for edging floors covered with laminate, linoleum or carpet, while the walls are also finished with MDF panels. They are made from compressed wood fibers with the addition of binders.

MDF skirting boards do not fade in the sun, are not afraid of moisture and dirt. Prices range from 2 to 3 USD.

You can fix the MDF plinth with glue to the wall, like wooden ones. And you can use liquid nails or special clips. Hooks-brackets are attached to the wall, the plinth is tightly mounted on them. End cuts and corner joints are closed with plastic plugs to match the plinth. Fastening on brackets allows you to remove the plinth and reuse it without damaging it.

Plastic plinth

This plinth is made of foamed PVC and is not environmentally friendly. Therefore, it is also used in combination with non-natural floor coverings: linoleum, laminate and carpet. Less often - with ceramic tiles.

Plastic floor plinth is very popular now, as it is practical and cheap. The product can have a different shape, color and shade, which allows you to choose a plinth for every taste.

Such skirting boards are not afraid of moisture and dirt, are not subject to rotting and corrosion, but are less strong and durable than wooden ones.

At the end ends and corner joints, special plastic plugs and elements are used. A significant drawback is the inaccurate match of the shade of the plinth itself and the plugs.

Plastic plinths are fixed with self-tapping screws to the wall. At the same time, nothing is visible on the front side, since the inner sash is fixed, which is then covered by the front. The sizes of PVC skirting boards can be very different and, accordingly, the cable channels that are made in them are of different sizes: sometimes only for one television cable, and sometimes you can put a whole bunch of wires in them, and even separated by partitions.

The price for plastic skirting boards is from 0.9 - 1 USD, plus additional elements - each for 0.37 USD.

Ceramic plinth

Until quite recently, there was no such concept at all. If ceramic tile floor edging was required, it was made from the same tile, only cut into the necessary pieces. At the same time, the cut edge has always been not very even and aesthetic.

Today, a ceramic skirting board most often comes with a tile, you should definitely ask the manager about this before buying. It is always adjusted to the size of the tile and matches it in color. You can choose a plinth and separately, a different size and shade.

An indispensable accessory is a ceramic skirting board for the bathroom. They frame the space between the tiled wall and the bathroom. Such a plinth has an unusual shape of a concave hemisphere and looks very aesthetically pleasing.

The price of ceramic skirting boards starts from 4 - 5 USD. for 1 linear meter.

Foam baseboard

Such plinths are ceiling. They can have different shapes, sometimes even very intricate and embossed, as required by the design of the room. Made from polyvinyl chloride. The simplest option is a bar that must be glued to the corner of the joint between the wall and the ceiling. Planks are easy to cut, but it is still worth buying it with a margin.

It is not possible to use foam skirting boards for the floor due to their fragility, yet they perform a purely decorative function.

The price spread is very large: from 0.3 c.u. up to 4 c.u. for 1 m.

Polyurethane skirting board

Polyurethane skirting boards are more decorative elements than practical products. This material allows you to create a variety of decorative elements that resemble real stucco or other material.

Such a plinth is light in weight, not afraid of moisture, fungus, household chemicals and mechanical damage, durable and easy to install. It can be painted in any color, and it is fixed with glue.

The price of a polyurethane skirting board "bites": it starts from 18 - 22 USD. for 1 m.

Aluminum plinth

Such skirting boards are mainly used due to the fact that they are all made with cable channels. At the same time, they are made of anodized aluminum, which provides unique strength and durability. The plinth aluminum cable is installed in medical institutions, railway stations, enterprises and other public places, as well as in household premises, for example, in the kitchen.

The material is not afraid of water and aggressive environments, including detergents, which means it is able to protect the power cables laid in it. Also, the aluminum plinth is wear-resistant and exceptionally beautiful. Used in high-tech style interiors. At the ends and corner joints, special plugs are used. The plinth itself is attached to the wall with dowels.

The price of aluminum skirting boards and sills starts from $5. for 1 m.

To make the right choice of plinth, please be patient. It is better to go to the store several times, double-check everything: both the color and the size, than to regret later that you were in a hurry with the purchase. A good option, if in doubt, is to purchase several different samples of skirting boards and try them on already in the room. This way you can avoid mistakes.

Reading 5 min.

So, you have decided on the style of the interior of the future room, perhaps you have already painted the rooms or pasted wallpaper? Then the matter remained small - you need to choose the color of the floor.

It is important that the selected shade of horizontal coatings fit into the palette rules. There should be a harmony of color combinations. It is also important to consider the dimensions of the room so as not to disturb the balance of space.

Floor color selection criteria

1. Assess the height of the ceiling and decide if you can afford dark colors on the floor.
   If the ceilings are low and the rooms are small, then the total area of ​​the room will be squeezed by the dark floor. In this case, you should choose a floor covering of a light shade - white, light gray, golden, sunny.
2. Analyze and select the color of floors and walls in a single harmony.
   It is important not to make mistakes with the selection, not to mix everything together and not spoil the picture of the decoration.
   Negative examples:
   • bright orange-gold and blue;
   • purple and light green;
   • blue and pink;
3. Decide what color to choose a plinth.
   It should frame the floor and not break the design. If the room is small, then the contrasting option will create an imaginary frame and visually reduce the space. The color of the plinth can be wood or plastic, marble or granite - for every taste!

How to choose a skirting board color

Ideally, the plinth is selected under the floor covering. And the textured pattern is also best combined if it is in the same direction.

• For example, for a wooden floor, it is best to choose a wooden look or its PVC equivalent.
• Plastic is suitable for the carpet, and it is more interesting to choose contrasting shades - not tone on tone, but as a highlighting frame.
• Under tiles, of course, it is best to use a ceramic version from the same collection as the tile itself. Color is an alternative to frieze.
• Self-leveling floor allows you to vary the choice, which depends on the chosen design.

Let's talk about the most common floor colors

White floor in the interior

White color is associated with lightness, spaciousness and purity. With such a floor, the room will be visually larger and wider. The feeling of spaciousness will dominate. But there will be more coldness. Perfectly match with the white floor. Very good in the style of minimalism, art deco, constructivism, hi-tech, Indian and, of course, in everyone's favorite eclecticism.

Under what is the skirting board selected in the case of a white coating? Focus on any components:

Since the floor itself is absolutely non-binding, the plinth can become just an element of decor and a link.

gray tone

Elegant, discreet, languidly soothing gray. It is now so fashionable that it can be found in any collection of finishing materials, be it furniture upholstery, window frames or a stretch ceiling.

Gray color is in perfect harmony with:

• white,
• black,
• red,
• pink,
• turquoise,
• lilac.

A bit of bright yellow also looks great against a large gray background - a small fluffy sunny rug on a smooth floor will look great. Skirting in this case, it is best to choose exactly the same tone.

Beige, yellow, golden, brown colors

This is a classic of the genre, especially if wood-style flooring is chosen. Absolutely any interior style in general is suitable for this floor. There is no escape from the classics, natural shades are combined with everything, so that a vicious circle of the rule of permissiveness is obtained.

For such a floor, it is best to select a plinth in the same tone, only slightly change the intensity of the color - it can be darker or lighter.

Orange, red

This is a bit reminiscent of the Soviet style - when the floors were painted with orange, red, burgundy enamel. However, too large differences in effect are given by differently selected materials and methods of flooring. It's hard to give advice here.

It is important to understand only one clear rule- if you have a controversial color, then do not forget about the compatibility palette. Warm with warm, cold with cold and acceptable combinations between them. To do this, get the necessary compatibility cards and study in detail what you like the most from what is allowed.

How to choose a skirting board color for a non-standard creative floor?

Expert advice!

Do not forget about the possibility of returning the goods to the store within 14 days. Be sure to attach the planks to the floor and finished walls at home, move away to the side and take a closer look. Go to bed, and in the morning look at a fresh head again. Very often the result does not live up to expectations, you need to have time to change!

Black, chocolate, wenge

Very trendy. Minimalism, hi-tech, Egyptian, offer a lot of options for interiors with black or extremely dark floors. It should be laid in rooms where you do not have to sleep or rest - it is too tiring and loads the psyche. But it is beautiful in dance halls, cafes, in the office or on the balcony. English style to take your favorite shades from it to equip your favorite room.

Do you always follow fashion in every area of ​​life? Read what modern designers offer to add zest to an apartment or house.

We offer a few more photos of different color combinations.

Installing the skirting board is the final touch in the renovation. The plinth performs not only a decorative function, but also closes the not always beautiful joint between the floor and the wall. It is important to choose the right color for this element so that it harmonizes with the floor and emphasizes the overall design of the room. Let's figure out how to choose a skirting board for the floor.

When choosing, they are repelled by the color of the floor, door or walls. An interesting design solution can be obtained by choosing a skirting board that contrasts with the color of the floor and walls. But in order for such a solution to look harmonious and beautiful, you need to have a taste.

If the plinth is selected according to the texture and color of the wall decoration, then it is purchased after the completion of the fine finish. This will allow you to take into account the resulting shade of the wall and choose the perfect tone. As a rule, the plinth is chosen after the repair of the walls and floor is completed.

When laying parquet or other wooden flooring, it is best to immediately select or order a floor skirting board from the same manufacturer. This will allow you to get an element from the same type of wood and the same tone as the main floor.

Plinth puts a logical point in the decoration of the floor and walls

The most difficult choice based on the color and texture of the doors. In this case, the plinth is designed to emphasize not only the floor, but also the door frame.

Which material is better

The material of the skirting board must match the material of the floor covering:

• Solid wood skirting boards are perfect for wood flooring or high-quality laminate flooring.
• For a cheaper laminate, a plinth covered with veneer or made of MDF is suitable.
• Products from MDF or PVC can frame the floor from any material except wood and tiles. Some models have special inserts. By mounting a strip of linoleum or carpet into this insert, you will get an element that does not differ from the color of the floor.
• Only a plastic or special ceramic plinth is suitable for ceramic tiles.

Sizing

When determining the desired size of the plinth, they rely on:

• the height of the ceilings in the room;
• the volume of the room;
• floor and wall color.

In large rooms, it is highly undesirable to install thin skirting boards. They will violate the geometry of the room, and disfigure the design of the room. More suitable for this case will be wide models, and their fastening should be carried out exclusively to the wall. In such rooms, models of white or contrasting colors look good.

For a small room with low ceilings, it is better to take a model of the same tone as the walls. Visually, the surface of the wall will continue, as it were, and the entire room will visually stretch in height.

For a standard room, they usually take models with a height of 4.5 cm to 7 cm.

Color matching

As a rule, the plinth is selected in the same tone as the flooring. This approach is win-win. The plinth of the same color with the floor or walls does not stand out in any way, a merging surface is obtained. Sometimes designers suggest using 1-2 tones lighter or darker than the main coat.

Modern designers quite often pick up the plinth to match the color of the walls. This approach looks great on plastered or painted walls, but is not suitable if wallpaper is pasted with a pattern. The selection of skirting boards for the door is appropriate only if they are made of natural wood. The tone in this case is chosen identical with the platbands. In addition, make sure that the thickness of these elements is the same.

Sometimes designers take a skirting board in the same color as the furniture in the room or match it to some interior detail, such as a picture on the wall.

In very rare cases, skirting boards are chosen to match the color of furniture or interior details.

More recently, white skirting boards have been used. They look very interesting, but require taking into account the combination of the color of the floor, walls and furniture. Modern technologies make it possible to achieve the optimal solution with the help of special design programs. You can “play” with colors in them and achieve the best solution.

White plinth

A bold enough decision is to choose a plinth in a contrasting shade. It is also better to make such a selection on a computer first.

Should be taken into account! For a natural wood floor, it is better to choose a wooden plinth, taking it to match the floor or a little darker. Other options for such floors, as a rule, look ugly.

Types of skirting boards for the floor by material

Modern hardware stores offer skirting boards that have a different color, size, shape and material. If desired, you can order a curvilinear sample repeating the bend of any surface. Models with a cable channel are in demand. Today, such products are produced not only from plastic, but also from wood. Consider the main advantages and disadvantages of skirting boards made of different materials.

Plastic

Plastic plinth is used for carpet, laminate and linoleum. As an exception, it can be used for ceramic tiles. Despite the fact that this is not an environmentally friendly material, it is popular due to its rich palette of colors, practicality, ease of care and low price. Such specimens do not rot, are not afraid of water and dirt.

Additional fittings are produced for plastic skirting boards: connecting elements and plugs. Unfortunately, the shade of these elements may not always match the color of the base material.

The plastic baseboards have channels for cable laying.

Fastening is carried out to the wall with self-tapping screws. For the convenience of consumers, models of various thicknesses, shapes, as well as having channels for the cable are produced.

The price fluctuates around $1. Additionally, you should consider the price of fittings.

Wooden

Such models make them solid wood. Their main advantage is ease of fastening, naturalness and environmental friendliness. Such an element is fastened with self-tapping screws, cutting off the required size with a hacksaw for wood or a jigsaw. If necessary, such a model can be easily repaired or dismantled.

Wooden plinth

The disadvantage is the sensitivity to humidity. They should not be used in utility rooms with high humidity.

Most often made from pine wood. The cost of such a model per linear meter depends on the quality of the wood used:

• from $0.7 in budget models;
• 5 - 3 $ in higher quality options.

Oak and linden are more expensive types of wood, and the plinth of them will cost more:

• from linden from $2.5;
• from oak 5 - $ 8 and more.

These three types of wood I use most often. Other types of wood are used less frequently. For connoisseurs of sophistication, they produce products made of ebony and mahogany, acacia, dusia, merbau and other non-traditional wood species for construction.

When buying a wooden skirting board, you need to look at the characteristics of the wood, such as its class. Even models made from rare wood, but of a low class, will have a low price. This is due to the presence of a large number of knots, marriage, or the manufacture of e from a solid array, but by gluing along the canvas.

A wooden plinth, like a plastic one, can follow the contours of the elements of the apartment, but such a model will have to be ordered individually and the price in this case can reach $ 50 per linear meter.

Such a plinth will have to be made according to an individual project.

When choosing a plinth, it should be borne in mind that it will have to be varnished and in the future it will become several tones darker than the original color. Find out with maximum certainty what will be a little wetting it with clean water.

Veneered

Such models are a subspecies of wood, but they are not made from solid wood. For the base, as a rule, pine is used, and the top is covered with a thin veneer of more expensive wood. Such models have many shades, which greatly facilitates the choice.

The price of such products is in the range of $ 4.5 - $ 5.5.

Veneered plinth also refers to wooden

MDF

MDF plinth is used if the walls are covered with the same material. Such products are relatively resistant to water and dirt, do not fade in the sun. They are fixed with special clips on staples or on liquid nails to the wall. Mounting on brackets makes it possible, if necessary, to dismantle the plinth and reuse it.

The price fluctuates from 2 to 3 $.

Plinth from MDF

Ceramic

This is a completely new type of skirting board that is used directly for edging a tiled floor. It is often sold as a set. By purchasing such a kit, you get materials that are ideally suited to each other. If you buy separately, you can choose to match the main material or a slightly different shade.

Ceramic plinth - the perfect frame for floor tiles

Another use for this skirting board is to frame between a tiled wall and a bathroom. This is a beautiful and aesthetic edging solution above the bathtub.

The price ranges from $4 to $5 per linear meter.

Styrofoam

Such material is not very suitable for the floor and is used for ceilings. It can have a different shape and relief. It is easy to cut, glued with special glue.

The price is from 0.3 to 4 $ per linear meter, depending on the complexity of the surface.

Styrofoam skirting successfully used for ceilings but not suitable for floors

Polyurethane

It's more of a decorative element. Elements are produced with a great variety in shape and appearance. It may, for example, resemble stucco.

Products are not afraid of water and pathogenic organisms, are lightweight, durable, and are not difficult to install. The polyurethane skirting board can be painted if necessary. Attached with glue.

Polyurethane skirting board

The big disadvantage of this material is the price. It ranges from $18 to $22 per linear meter.

Aluminum

Such products are produced from anodized aluminum, which gives them durability and greater strength. They are not afraid of water, detergents and aggressive environments. All models have a cable channel, which is convenient and in demand by modern consumers.

Aluminum plinth

It is installed in public places (hospitals, enterprises, railway stations), as well as in amenity premises of the residential sector. Floor metal plinth is widely used for high-tech style rooms. There is a special accessory for this model. Fastening is carried out with dowels to the wall.

The price for such models is from $ 5 per linear meter.

We have covered different types of floor skirting boards. We hope that our review will help you decide which skirting board to choose for the floor in your home.

Plinth is a small but very important part of the interior, which can greatly affect the visual perception of a large or small room. How to choose the right plinth?

There are three main criteria:

What material is the plinth made of?

The material from which the plinth is made is chosen based on the material of the coating.

• For a wooden floor, whether it is a solid or parquet board, piece parquet or high quality laminate, a solid wood skirting board is better suited.
• For a floor with a ceramic tile cladding, it is better to choose a ceramic plinth.
• Medium quality laminate flooring, linoleum and carpeting allow the use of MDF skirting boards or PVC plastic skirting boards. In such cases, skirting boards with an insert for carpet or linoleum are also suitable to ensure a good combination of skirting board and floor.

Skirting board size

The size, or rather the width of the skirting board, can affect the visual perception of the room.

• A wide plinth from 70 mm, which is attached to the wall, is suitable for spacious rooms with perfectly flat floors and walls.
• Narrow skirting less than 45mm. suitable for small or too narrow spaces.
• The average width from 45mm to 70mm is suitable for medium-sized rooms.

Skirting board color

The color of the skirting board can be matched to the color of the floor, doors, walls, architraves and even the color of the furniture. There is no single rule, but the basic principles are known.

• Under the color of the floor. It is relevant in cases where they want to make it less noticeable and visually expand the room.
• Under the color of the walls. This selection option is suitable for rooms with low ceilings and perfectly smooth walls. In this case, a plinth for painting from MDF is better suited. Such a plinth helps to visually increase the height of the walls and is not suitable for small rooms.
• Under the color of the doorway trims. This is the most practical way to give the interior a look of completeness. The color of the floor and walls can then contrast with the color of the baseboard.
• Under the color of the furniture. The most impractical option, since when replacing furniture, you will have to change the baseboard.

Another important point is a high-quality floor screed. If the screed is not even, then the floor covering will not lie as it should. And accordingly, after the floor covering (finish), the plinth will not fall in the same way. Therefore, pay attention to the quality of the work, starting with the rough work, and then the finishing work will delight you.

More interesting articles

Semi-dry screed weight per 1m2

How to choose lining color

Faced with such a problem as choosing a color, everyone cannot solve it because they do not know all the rules and options. To make sure your interior decoration shows full and beautifully used ceiling and floor coverings. They help to hide the corners of the connection of the wall and ceiling, walls and ground, as well as hide all errors and violations.

Flash plates are installed on the last turn, when the room is ready and completely finished. The base should harmoniously fit into the interior of your apartment.

Steelworkers now produce knitted edges in various shapes, sizes, materials and colors. Therefore, to choose a base, now there is no problem, both are painted and imitated rocks and wood.

Everyone chooses a decorative plate according to their taste, depending on the role they play in the interior.

It can be chosen as the color of the floor and ceiling, under the wall, furniture or curtains. The sidebar can only be a complete element at the end, or it can be distinguished by its brightness and unusualness. It plays a big role in your interior and changes it without reception.

How to choose the color of the base: get a harmonious interior

Currently, skirting boards are supplied from various materials, from wood, plastic, MDF.

Select a sheet metal plate under the floor covering

You can choose the base on the floor in several ways, depending on what you want.

If you want if the floor doesn't shrink or blend into the floor, choose a tone-on-tone color with a floor cap. On the contrary, they buy knitting strips a few tons darker, so they create a contrast with the ground.

It looks very unusual and bright, and the apartment will be original, because many are afraid to deviate from the established standards.

Choose a pedestal under the tone of the door

Nowadays, you often choose the color cords of the doors and make them in the same color scheme, regardless of the floor and walls. It looks very unusual and very nice, especially if you have doors and wood edges.

They can be lighter than the whole tone of the room, for example white, or vice versa, they will be darker from the floor and walls.

If your door is not wooden, but, for example, a glass, then it is better to take a plastic base so that it looks harmonious.

Choose a pedestal under the tone of the walls

Nowadays, many people use it to decorate a room in monochrome or paint.

In this case, you can use the crossbar in tons of walls, buy them ready-made or for painting, and paint them the same shade as the walls. If you take ready-made wicker boards, then take a background with you so as not to make a mistake in choosing.

Or you can do it easily, and when you choose a wallpaper for a room, go straight to it and choose a scene.

Choose footer color

As already mentioned, the sheets may not match the floor, walls or doors and have a special role inside.

This is best done if you are the owner of a large area with high ceilings and otherwise in a small room, such panels simply emphasize their small area and visually reduce them. On the ceiling and floor, you can choose a light knit board in one color and compare them with the color of the furniture or curtains and all the textile linings in the room.

Also, if you have parquet flooring, a mosaic pedestal that includes multiple colors will look very original.

We choose the edges of the ceiling

Most often, a white base is used, because it perfectly reveals the ceiling and matches all shades. Even with a white surface, the room is lighter.

They also opt for sliding tiles to tone the walls, but this is best done in the bedroom as it gives some intimacy to the room. Many choose knitting on the floor and ceiling in one ton, which also looks very beautiful and original.

The subfloor appears to be a fully functional piece that allows floors to be washed without damaging walls or protecting cracks while fixing flooring and walls. But this is only at first glance.

In fact, a well-chosen attic can have a profound effect on the inside - provide it with strength or, on the other hand, lighten it up, add depth and intrigue. Experts pay great attention to floor panel panels. And there are some secrets that are easy for amateurs to practice.

Combine the base pedestal...

This is one of the most obvious and simple solutions.

This will allow you to perfectly integrate the door into the salon if it is in a contrasting color. For example, this photo-white door in a rather dark interior maintains white floor lines on the floor, a white ceiling and corners.

In addition, the pedal in this version makes the interior light and airy.

This would not be the case if it were a dark base.

… or floor coverings

Another solution that lies on the surface is to combine the base with the floor covering.

But this method seems simple at first glance. This rule of thumb is often chosen by those who have settled on a plastic panel for some reason (usually offered by flooring manufacturers such as laminate).

The compatibility issue appears when the base reaches the door.

If the colors "fight" with each other, then there is no problem! If not, and the doors have already been selected and approved, it makes sense to take new boards - the same color as you chose for the disk.

Base painted to match the walls

A wonderful solution when it is necessary to "dissolve" the boundaries of space.

But here you need to understand a little more than someone who first encountered planning and repair. For example, door frames, opening designs, and ceiling layers will need to be defined.

One ton darker

Very common and decorator lovers is the way the base is drawn.

Like the version of the skirting board in the color of the walls, it acts to blur the boundaries of space. Well, if there is the same tone, and there is a ceiling braid.

Connect the stand to the color of the window frames

A good solution, especially if the frames contradict the walls.

Base and all other plasters of the same color

You can use this technique if you have a lot of plaster in the room.

Leave it against the wall, they will set up a good schedule for the interior and fill it up, thereby freeing up empty space.

How to choose floor floor color

It is very easy to edit the defects of doors and windows. I combined them one way and now they look the same.

When there's a plate on the walls

The situation is simpler.

You simply create a single composition of color and style - the design of the wall, the disk itself and the footer. This solution gives the interior a solid foundation. In this photo, the cornea of ​​the ceiling is painted the same color as the bottom slab. Such graphics show space and display its geometry.

covered platform

Good in damp rooms and in the kitchen. As a rule, it is made of the same tile with which the floor is finished.

In fact, this is the correct solution, but still make sure that the pedestal is like itself - that the tile was small in size, preferably with a small edge. There are such sets in the collections of floor tiles. If you only use large sized carved tiles (same as those on the ground), don't expect aesthetics and a see-through look.

Many of us are familiar with such a “state of mind” as repair. Now you have already plastered the walls, pasted wallpaper on them and laid out the floor with parquet. The final step in laying any floor covering is the installation of a skirting board, which will give the entire room a finished look and hide the joints between the walls and the floor that are unpleasant to the eye.

However, choosing the right skirting board for your interior and room design is not so easy.

How to choose floor plinth? - 7 basic rules

If it is not chosen correctly, then not only will it not be able to emphasize the advantages of your design solution and visually decorate the room, but it can work quite the opposite - spoil the excellent interior of the apartment.

It is about how and on the basis of what to choose the color for the floor plinth in the room that we would like to tell you today in this short article.

How to choose skirting board color

The color solution for such a non-final touch during repair, like a plinth, is usually taken based on either the color of the flooring or the color of the walls.

Choice of color to match the floor

The most ideal option, if you do not want to "play" with a visual change in the dimensions of your room, is to choose a skirting board to match the color of the floor, or a couple of shades lighter than it.

Also, do not experiment with materials - a wooden baseboard, or its plastic counterpart with a wood-like texture, is best suited to a wooden floor.

This option is the most classic, because the very first skirting boards began to be laid exactly in the color of a wooden floor made of the same wood, since a floor from such a material could not be made close to the wall, because as a result of changes in humidity, it could expand and contract, which would lead to "bulging" of individual floorboards.

It was then that the joints of the floor with the walls began to be faced with a separate board, which is now known to all of us as a plinth.

If the floor in your room is already covered, then the easiest option to choose the best color is to purchase several different shades you like in the store, which you then attach to the floor and compare what you think will look best in your interior.

And unused skirting boards of inappropriate colors can always be returned to the store within 14 days under the law "On Consumer Rights" provided that the presentation is preserved, so why not take advantage of this legal "loophole".

Choosing a color to match the walls

Recently, standard solutions have increasingly ceased to suit the majority of clients, and they want to see a unique design in their apartment.

In such cases, choosing the color of skirting boards often becomes a big problem.

Since the plinth is an important element of the interior, it can and should be used to express a design idea and is involved in creating the overall look of the room, however, the materials for its manufacture are usually not combined with the materials used for walls - wallpaper, decorative plaster or painting.

In the case of choosing a skirting board based on the general color of the room (and its walls in particular), the choice is usually made to match the color of the walls, or a couple of tones darker.

However, in this case, the shape of the skirting boards should also be taken into account - they should be high enough so that the room does not become visually smaller as a result of applying such a color scheme.

Of course, the choice of colors will also depend on the materials of the future plinth. For example, plastic floor skirting boards can now be purchased in absolutely any shade at the request of the customer, if you know exactly what you need, or you can choose from the most common colors that, as a rule, are suitable for most rooms.

What to look for when choosing a skirting board color

So, in order not to make a mistake with the choice of the color of your future skirting board, you should pay attention to the following details:

• the total area of ​​the room.

  The color of the plinth can significantly visually change the size of the room - both in width and in height. If your room has a small area, then due to light-colored skirting boards, it can be visually expanded.

  An even greater effect can be obtained by designing window and door trim in the same light color as the baseboard. If the color of the floor is only a few tones darker than the color of the walls, then the light baseboard will act as an excellent space divider and visually increase it;

• the general color palette of the room. Although the separation of the floor from the walls can be made quite pronounced and contrasting due to the skirting boards, the main thing in this matter is not to overdo it and not use bright colors so that the whole room looks harmonious and complete after the repair;
• shape of the future plinth.

  The form is not the last place when choosing the color of the plinth, because it is not always just a continuation of the floor, and sometimes it protrudes significantly along the wall.

  Skirting boards of the same color but different shapes can significantly change the look of your room;

• presence of texture. For example, for a board floor, you can choose skirting boards with the appropriate texture of the material, which will complement the interior and not stand out from the overall design style.

And you can choose for yourself the options that are optimal both in terms of materials and colors on the website http://plintus-optom.ru, among the wide variety of which everyone can find what he needed.

© OchProsto.com

The choice of skirting boards is started when the flooring is ready, because these products are designed to cover the junction between the wall and the floor. Skirting boards can be made of plastic and solid wood, polyurethane and foam, they can be veneered or laminated, they can be lined with porcelain stoneware, glass or mosaics. Remember that it is not only the material from which these products are made that matters, but also its height, shape and color. Today we’ll talk about how to choose the right skirting board for the flooring and decide on its color.

Massive plinth

Despite the fact that cutting-edge materials are gaining the attention of consumers more and more, the wooden skirting board for the floor has not lost its appeal. Massive skirting boards are used, as a rule, for floorboards. It is unlikely that a person who wasted money on expensive parquet will buy artificial finishes. Given that wooden floor skirting boards have low moisture resistance, they are well suited for dry rooms - a nursery or a bedroom.

For wooden floors, a skirting board is usually chosen from the same wood from which the flooring is made. It is best to order skirting boards together with parquet at the factory: most companies that supply solid parquet to the market also manufacture skirting boards for their flooring, so there should be no problems. Remember that you should not choose a plinth from a different type of wood for a certain type of parquet, even if you think it is more appropriate.

In the domestic market, plinths made of solid beech and oak are most often presented. Also, a massive plinth made of cherry has good decorative characteristics. The advantages of a massive plinth are environmental friendliness, strength and durability of the material - natural wood. In addition, it is possible to order a product for individual sizes.

The very first drawback of a massive plinth is the high price. Sometimes, in order to make massive skirting boards more stable and less expensive, they are made as veneered - using the "set of planks" method. However, such skirting boards have low decorative properties, because the collected pieces of the array often differ in color. Since the skirting boards are mainly selected for parquet or door frames, you can not expect a 100% tone-on-tone hit.

In addition, skirting boards made of natural wood can be exposed to changes in temperature and humidity balance. With changes in the level of humidity and temperature in the room, internal stress arises in the wood, which can tear the product away from the wall along with plaster or wallpaper. Installation of a wooden plinth should be carried out on screws with dowels or self-tapping screws with flat heads, provided that the walls are perfectly even, since the product can be deformed in such a situation or even crack.

Before choosing a floor plinth for massive parquet, remember that wood is a natural material, so you should not expect artificial smoothness and evenness from it. If you want to get a more even tone plinth, it is recommended to buy this decorative material with a margin, as the tree has annual rings and knots.

Veneered plinth

Veneered plinth is ideal for floor coverings made of wood - parquet, parquet boards, solid floorboards, as it is made from natural wood veneer. In addition, it is much cheaper than a massive plinth. A fairly wide range of such products is explained by the constantly expanding list of wood species used for the production of parquet floors.

Compared to a massive plinth, veneered ones hold the geometry better, they twist and bend much less often. Dimensional stability is achieved thanks to the manufacturing technology of the base of such a plinth, which is the type-setting array of such inexpensive moisture-resistant wood as pine.

The entire plinth plank is assembled from pieces (waste) of wood measuring 20-50 millimeters, which are fastened and glued together according to the principle of lightning. A thin veneer of valuable wood or its artificially aged and painted cheap analogue is glued on top. The strength of the skirting board can be increased by several layers of wood. Bioprotection is often applied to the surface of the product, which protects the veneered plinth from fungus and harmful microorganisms.

The appearance of the veneered skirting board is one of the strengths of this product, as it contains tone transitions that are inherent in wood, bumps and knots, sapwood and a beautiful fibrous texture, all that makes this decorative element natural and expensive. Possible form of veneered plinth - embossed or straight, height - from 40 to 80 millimeters.

However, this product still has its drawbacks. Before choosing a skirting board, you should pay attention to the fact that you still have natural wood in front of you and, despite the fact that the veneered skirting board is varnished in several layers, it changes color over time, like ordinary parquet. But it depends to some extent on the wood. Sometimes the color of the veneer skirting board is set using tinting impregnation, visually preserving the structure of the tree.

The fastening system of the veneered skirting board consists of special clips on which the skirting board itself will be “dressed” directly. It is possible to fasten such a decorative element to “liquid nails”. In addition, you do not need to use plugs and corners when installing a veneered plinth.

Plastic plinth

The plastic plinth is suitable for linoleum and laminated parquet and is categorically not intended for natural parquet flooring - piece parquet and, moreover, parquet flooring. There is a kind of plinth made of plastic under the carpet, which is an L-shaped bar. A tape is inserted into it, which is cut off from the carpet. The result is a plinth made of the same material as the carpet.

Relatively recently, a flexible plastic plinth appeared on sale, the structure of which was changed at the molecular level, and which, after manufacturing, is stored in a special package. Such products are able to take the required shape, smoothly edging the curvilinear boundaries of the floor and walls, bends and any decorative elements of the interior, for example, columns.

To install a flexible skirting board, a carrier profile is attached, which is preheated with hot air or warm water. The installed element hardens and retains a given shape under the influence of air. The walls for installing this plinth must be perfectly flat, otherwise gaps and cracks will be visible.

Almost all plastic floor skirting boards are disassembled: they consist of a front and a mounting part. The hollow structure of the plastic skirting board allows you to hide several different wires inside the product at once. The plastic floor plinth is ideal for service rooms and offices, as well as for buildings where there is high humidity.

The advantages of plastic skirting boards are as follows: they are not afraid of external influences and temperature changes, they are moisture resistant, they do not fade in the sun, they do not deform, they have cavities for wires and the lowest price among all skirting board options. To the flooring (laminate or linoleum), you can choose tone-on-tone plastic skirting boards, straight or embossed.

Some consumers believe that plastic baseboards reduce the cost of the interior, so before choosing a baseboard for linoleum, you need to think carefully. The disadvantages of a plastic plinth are unnaturalness and artificiality, the need to use plugs and corners, and these elements, in turn, will stand out from the general decor, as they are very noticeable. In addition, there are size restrictions - the maximum height of such a plinth is 45 millimeters.

Laminated plinth

Laminate skirting board is perfect for laminate flooring. For everything else - not intended. Many laminate flooring manufacturers make their own skirting boards in the same color so that you can create the perfect ensemble indoors. The main advantage of such a decorative element is the absolute match with the color, texture and gloss level of the flooring.

A laminate plinth has higher technical characteristics in operation compared to plastic. This plinth does not need to use additional fittings - corners or plugs. When installing, you just need to cut off the excess part at an angle. But at the same time, before choosing a skirting board for a laminate, analyze its shortcomings.

The main disadvantages of laminated skirting boards are a small selection of manufacturers and an insufficiently saturated market. Almost no domestic brands are represented, because they have a low assortment. In addition, the laminated product is limited in shape - laminated plinth, as a rule, is straight, and in height - up to 60 millimeters. Laminated skirting boards are quite expensive, sometimes even more expensive than veneered ones.

metal plinth

A high-quality metal plinth is the result of the development of modern technologies. For the manufacture of this decorative element, materials such as steel, brass and aluminum are most often used. In the production process, skirting boards are additionally anodized or treated with a polymer film to protect against blackening and oxidation.

Brass skirting boards do not corrode, as a result of which such products almost do not change their properties and appearance over time, and also have a low cost. Stainless steel skirting boards are also quite popular, they are mirrored, matte or polished, guaranteeing a wonderful visual effect.

Skirting boards made of metal are great for installation in wet rooms, bathrooms and kitchens. Metal skirting boards look especially harmonious in the interior, in which there are already elements of polished or polished steel. In living rooms, metal skirting boards are most often installed as part of a high-tech style solution. Metal plinth can be combined with floor coverings such as linoleum, carpet, self-leveling floors, ceramics and porcelain stoneware.

If you don't know how to choose a skirting board for floors in government, medical institutions, and food processing complexes, then give preference to metal products, because they are resistant to most soluble chemicals, as well as to acidic, salty or marine environments.

The metal plinth is characterized by increased durability due to its strength, resistance to temperature changes and coating with a special polymer composition, which extends its service life. He is not afraid of water, mold, fungus and fire. Sufficient flexibility allows you to mount it in a circle with a radius of up to one and a half meters. The downside of the metal plinth is the high price of the product.

Ceramic plinth

Not so long ago, a ceramic plinth for tiled floors was created, which is usually laid on the floor in hallways, kitchens, toilets and bathrooms. Previously, ordinary ceramic tiles were used to equip the plinth, which were cut with special tools into several parts, depending on the selected border width. However, not all tile cutting equipment ensures the evenness of the cut edge, so one could not dream of the impeccable beauty of such a plinth.

The ceramic plinth adheres closely to the wall, hides the perfectly uneven edge of the tile trim and gives the room a finished, neat look. Ceramic plinth is characterized by high durability, it does not darken over time, withstands mechanical stress, water or cleaning agents, protecting the lower part of the walls from premature loss of an attractive appearance.

In the bathroom, ceramic plinth can be installed not only along the perimeter of the wall from below, but also at the point of contact between the wall and the sink or the wall and the bathtub in the form of a rim. Using a ceramic plinth, you can also easily add it to certain elements of the stairs. Manufacturers produce this finishing element very light and thin, which facilitates its installation on ordinary tile adhesive used for wall tiles.

Ceramic skirting boards are usually designed specifically for a series of tiles. Such products have different shapes, colors and patterns, which allows you to combine them in order to achieve the most successful design result. The top of the plinth, as a rule, is made in the form of a rounded cut (bevel), which gives the product a sophisticated and elegant look.

The height of the ceramic plinth is developed by the manufacturers according to the specific ceramic tile. The length of the skirting board most often coincides with the length of the tile itself to simplify the process of laying it. Some manufacturers produce their ceramic skirting boards with a length that is more than one and a half times the length of the tiles in order to reduce the number of seams between them and achieve greater accuracy when working.

Polyurethane skirting board

Polyurethane plinth is a fairly popular decorative element of the joint between the floor and the wall. It performs a special decorative function, as it is ideal for arranging floor lighting, regardless of its color. A secondary, but no less important task of finishing the flooring with a polyurethane skirting board is the placement of communications that run along the floor.

Polyurethane is an unpretentious material that is able to endure temperature fluctuations, tolerant of high humidity, does not absorb moisture and odor, durable, lightweight. These qualities of the polyurethane skirting board allow it to be used not only in dry rooms, but also in the kitchen and bathroom. If you need to edging curved surfaces, you can slightly curve this decorative element and even create rounded lines.

Polyurethane skirting boards respond well to painting with almost all known paints. It is worth mentioning another big plus of polyurethane products: after painting, polyurethane skirting boards can be washed with a wet cloth and even with various detergents, they can easily withstand blows with a mop or other similar objects.

If you are interested in how to choose a ceiling plinth, then you should also pay attention to the polyurethane ceiling plinth. After all, its purpose is not only in finishing the joint between the wall and the floor, but also in the design of the ceiling surface. Such a plinth perfectly hides defects and irregularities at the point of contact between the ceiling and the wall, rounds off room corners, it can be used to decorate bay windows, columns and multi-tiered non-rectilinear ceilings.

I would also like to note the ease of installation of a polyurethane plinth: it will take only a couple of hours for a room with perimeters of 20 meters and right angles. Before installing the polyurethane skirting board, it is necessary to putty, sand and dry all surface irregularities. After that, glue is applied to the surface of the plinth, distributed evenly, after which work begins on the direct fastening of the product. The element is applied to the wall, then glue for the joints is generously applied. Each next element is tightly joined to the previous one.

Foam baseboard

If you have not yet decided how to choose the right ceiling plinth at minimal cost, then pay attention to the ceiling foam plinth, which is made from extruded polystyrene foam. It is used for interior decoration, as it harmoniously combines with wallpaper, painting and adhesive ceiling tiles. In appearance, foam skirting boards come in different widths, with or without patterns.

Such a product has many advantages: attractive appearance, low cost, ease of installation and a wide variety of shapes. This plinth is extremely easy to process, as a rule, an ordinary sharp knife is used for cutting. When choosing a plinth for a stretch ceiling, you need to follow a few recommendations, or rather, give preference to models with low weight: the foam plinth is just that.

Among the shortcomings of foam products, it is worth noting the great fragility, fragility and low elastic properties, so this skirting board breaks easily. In addition, foam skirting boards are more susceptible to environmental influences and require special care. Styrofoam is a combustible material, however, like wood, which is also used to make skirting boards.

Foam skirting boards do not respond well to aggressive environments, so they can even collapse from solvents, which are sometimes part of the adhesive composition. Glue for this reason must be chosen very carefully. Foam skirting boards can be glued with glue, which is specially designed for this - "Titan".

There are two ways to attach a foam ceiling plinth. The ceiling plinth is glued to the wallpaper with glue, it is customary to use the “Moment of Installation” composition, as it holds perfectly. If the ceiling or walls are not even, then you can also cover the gap that forms between the wall and the plinth with this glue, besides, it has a white color. The second way is to attach the ceiling plinth to the aligned walls before pasting the wallpaper using ordinary putty.

Choosing the color of the floor plinth

When choosing a floor plinth, you should first find out how long the product is required. To find out, you need to measure the perimeter of the room and subtract the width of the doorways from it. The usual length of the skirting board, except when the skirting boards are made to order, is 2.5 meters. The resulting perimeter should be divided by 2.5 meters, and you will get the required amount of floor plinth in pieces.

Try to buy a floor plinth and all the elements for it in one store. In addition, when choosing, it is recommended to check the batch numbers on different skirting boards - they must be the same. The color of the products must also match. Avoid skirting boards if they have a strong smell, as there is a good chance that they are made from poor quality materials.

Particular attention should be paid to how to choose the color of the plinth correctly so that it blends with the rest of the room. The most reliable solution is to match the skirting board to the tone of the flooring. In this case, you definitely will not be mistaken and will not spoil the design of the room. The plinth will blend perfectly with the flooring and become almost invisible.

Currently, the method of matching the color of the plinth to the color of the walls is also popular. If your house has plain walls, just take a piece of wallpaper that you used when pasting the walls and pick up the closest color in the store. If the wallpaper is with a pattern, then it is worth choosing a baseboard for the main tone.

Also in vogue is the use of white plinth, which merges with the color of the walls. Such an interior will look impressive enough, but it is not very durable and not practical, even if you ensure careful operation and careful maintenance. If you use light-colored parquet or solid bleached oak for flooring, then a white skirting board will also be an ideal solution that harmoniously emphasizes the interior features.

The reception of the contrast of the skirting board with the floor is considered appropriate when its color merges with the color of the decor elements, for example, textiles or furniture upholstery in a given room. Without observing this rule, a person’s gaze will “stumble” on this object in the interior. The mosaic plinth, which combines the shades of the flooring and walls, will harmoniously emphasize the combination of the color scheme of the room.

It is also customary to match the floor plinth to the color of the doors. Skirting boards with this finishing option will look natural and quite harmonious continuation of interior doors. Moreover, the color of the walls and floor can be a completely different shade.

Thus, the plinth is the final element of finishing the junction of walls with a ceiling or floor. Skirting boards are also used for decoration, so it is customary to select the material of the skirting board, depending on the color and texture of the floor. Sometimes you can match the baseboard to the color of the walls or the main elements of the interior of your home.