Device for welding of a polyethylene film. How to properly glue plastic wrap at home How to seal a bag with an iron

Ironing is one of the important, though not always pleasant, household chores that you need to do if you don’t want to look like you just got out of bed. But the iron is able to not only smooth out wrinkles on clothes. We offer 10 incredible ways to use the iron, which will make you suffocate with envy for those who thought of them.

(Total 4 photos + 6 videos)

1. Smoothing out dents on a wooden surface

If the surface of wooden furniture has worn out over the years and dents have appeared on it, then it is necessary to iron these places with an iron through a cloth or paper towel using steam. The dents will disappear completely, because when heated with steam, the wood swells slightly and rises. This method will get rid of dents even on a wooden floor.

2. How to remove wax stains from fabric

Candles often leave marks on tablecloths, carpets and tables, for example. In this case, ironing is also suitable. Lay a paper towel over the stain, iron it, remove the paper, and wipe the area with the cleanser and towel. This method will help get rid of traces of chewing gum on the fabric.

3. Fixing the edges of linoleum

An iron will help in the repair if it becomes necessary to fix the edges of the linoleum so that they do not twist. In order not to call the masters or lay a new coating, just take an iron and a piece of foil. Heat the problem area of ​​linoleum with an iron: put the foil and iron. After the linoleum moves away from the floor surface, you can glue it again. After applying the glue, press this section of linoleum to the floor with a roller or a cooled surface of the iron.

4. Hot sandwich

This method is often used by students in the hostel, if they do not have an oven, an iron will always help out. In addition, it is also very simple. All you need is bread, cheese, butter, parchment paper or foil, and a hot iron. Place a cheese sandwich between two sheets of foil. After that, put the heated iron on top for 10 minutes. Then take it off, turn the sandwich over and put the iron back on. When the sandwich turns golden, you're done!

5. How to cook eggs and bacon

If you don’t feel like a cheese sandwich, you can prepare a full breakfast thanks to the hot surface of the iron, which can easily replace the stove. Take eggs and foil. Make an impromptu frying pan out of foil by folding the edges. Break the eggs directly into the resulting frying pan, place it on the surface of the iron heated to the maximum and wait for the breakfast to be cooked. In addition to eggs, you can also cook bacon. Lay it on the foil and roll it up so that the edges are wrapped and the fat does not leak out. Place the hot iron on top.

6. How to seal a plastic bag

Using a hot iron, you can seal the bag with any filling to protect the contents from dirt, insects, etc. You can also seal the broken package. Our mothers and grandmothers actively used this method. Take a bag with the necessary contents, wrap the edges that you are going to glue with foil. Preheat the iron and place it on the foil, pressing down. Under the foil, the edges of the bag will melt and stick together. When the foil has cooled, you can remove it.

7. How to remove stains from carpet

Stains on the carpet are not a problem if you have a cleaning agent, a towel and an iron. You can get rid of large and old stains even on fluffy surfaces. First of all, you need to sprinkle the stain with a cleaner, moisten this place and put a towel on top. If the stain is large and the towel is small, you can simply move it around to treat the entire stain. We put a heated iron on the prepared place for a few seconds and observe how the stain from the carpet passes to the towel. Of course, it will take some time and repeated attempts to remove all the stain.

8. How to Remove White Water Stains

You will need a dry towel and an iron. Turn on the iron, set the lowest power, lay a towel on the wooden surface where the stain is located and start ironing. If the stain doesn't budge, then turn up the power a little, but be careful not to damage the wood.

9. How to remove old wallpaper from the wall

If it's time to change the old wallpaper, then you may find that it will be difficult to tear them off, parts of the old canvases will remain on the walls and you will have to scrape them off. But an iron can come to the rescue. Move the hot iron over the wallpaper so that there is a small distance between the wallpaper and the surface of the iron. Use steam. Heat and moisture will soften the adhesive and the wallpaper can be easily removed.

10. Reheating dinner without a microwave

When there is no microwave at hand, but you need to heat up food, a hairdryer and an iron will come to the rescue. Preheat the iron, lay foil on its surface so as not to smear it. On the foil, place the piece to be heated, and direct a stream of hot air from the hair dryer onto it from above. An iron heats up from below and a hair dryer from above. Microwave effect.

You will need

• - vacuum cleaner;
• - film welding device / soldering iron / wood burning device / iron;
• - attachment for a soldering iron;
• - metal plates / linen or foil (baking sleeve).

Instruction

Fill a clean bag with things or food (such as fruit or mushrooms to freeze) and try to bleed the air out of it. To do this, you can use a vacuum cleaner, removing all the attachments. This will make the plastic bag more compact, which is especially important when packing clothes and keeping food safe.

Purchase a special electric plastic sealer (or a manual bag sealer). It makes sense to always have it on hand if you often work with polyethylene (for example, keep on or collect large fruits and want to save it).

Read the instructions for the thermal apparatus and, according to its recommendations, make a thermal seam. Such devices are adapted for such work, and you will not need much effort. As a rule, they are universal - they pack not only from polyethylene, but also from polypropylene film, as well as laminated paper.

Prepare improvised means that will help you seal the bag. For example, put it between two pieces of metal (plates or just iron rulers). The free edges of the bag should protrude slightly from under the press. Swipe over them with a heated soldering iron or wood burner. Work carefully so as not to spoil the material! The metal will act as a stopper and prevent the plastic from curling up.

Take advantage of the experience of some craftsmen and prepare a soldering iron attachment yourself, which will allow you to solder the film with great convenience and make a neat seam. You can make a blade on a sting by bending a piece of tin plate.
Another option is to attach a wheel from a silicon lighter to the sting. Or a copper plate is rolled up with a tube, and a pair of holes are drilled in it along the diameter of the cotter pin (wire fastening). The nozzle is pulled over the sting; then a cogwheel made of copper is fixed to it with a nail.

You can solder polyethylene with an iron. Lay the parts of the bag to be welded overlapped, overlaying them on the wrong side and the right side with even linen strips (they must be made of 100% cotton or linen, without the addition of synthetic fibers!). Iron the film by heating the soleplate to the highest temperature.

Instead of fabric, you can use cut foil or a baking sleeve as a lining. In this case, place these materials at the bottom of the bag, fold the edge to be welded and cover it with a new strip of foil (or the second half of the sleeve). After ironing through all layers, remove the lining.

Finally, try out another common way to solder polyethylene. First, melt a small amount of waste plastic, then (before it has had time to harden!) Drip it along the line connecting the parts of the bag. After the “glue” has set, you will have a fairly strong (though not very refined) seam.

When choosing a cover for a greenhouse or greenhouse, gardeners and gardeners pay attention not only to the cost of this material, but also to its quality, as well as the degree of reliability and practicality. Very expensive and most durable options are not always available due to some circumstances. It is for this reason that the well-known polyethylene film has been especially popular and in demand for many years. Such oilcloth for coating allows not only to qualitatively protect the greenhouse or greenhouse structure, but also helps to save the family budget. It should be taken into account that, depending on the size of the greenhouse, it may be necessary to weld such a film, for which a special apparatus can be used.

The use of polyethylene for greenhouses

PVC-based film is a very versatile material that was originally invented as a packaging material. However, the versatility of polyethylene made it possible to use it much more widely, and today such a modern oilcloth is used in many areas, including agriculture. PVC materials made it possible to replace heavy, fragile and expensive glass when covering the greenhouse in the summer.

• Plain film based on polyethylene. The most popular oilcloth for gardeners and greenhouses. Differs in the lowest cost, and the form in the form of a sleeve promotes increase in the covered area twice. Easily assembled by hand. The standard service life is one year.

• Reinforced version of PVC materials. Represented by a plastic or fiberglass mesh soldered to the sheet material. The standard cell sizes of such polyethylene range from 0.8 x 0.8 to 1.2 x 1.2 centimeters. Such a PVC material is characterized by a heterogeneous structure and thickness, and when choosing, you should pay attention to the density parameters.

• PVC films. Compete seriously with the standard polyethylene film. PVC film has excellent physical and chemical properties, which allows the coating to transmit the light spectrum necessary for the growth and development of greenhouse crops. In addition, PVC materials are more resistant to low temperatures, and the service life is at least five years.

• Other types of films for the greenhouse. This category includes copolymer, polyamide and air bubble films. Manufacturers position options such as frost-resistant and do not require dismantling for the winter. However, the high price makes it not very popular for covering greenhouses with Russian gardeners.

Polyethylene welding

Depending on the material and scope of work, there are the following types of welding of polyethylene sheets:

• contact welding;
• extrusion welding;
• hot welding.

Polyethylene can be easily glued with your own hands. For this purpose, you can use a special welding tool in the form of a hand-held hair dryer for welding polymeric materials, as well as ordinary household appliances. Welding of the film web can be performed in several ways.

• Lay two film sheets on top of each other, and cover the overlap with a fluoroplastic film. Thoroughly heat the junction with the edge of a household iron, soldering iron or a special roller heated to 240 ° C.
• Two film sheets superimposed on each other are clamped between two metal strips with a slight release of material, which is melted over the flame of a conventional spirit lamp or using a blowtorch.
• Welding of polyethylene film with a special building dryer with a set of nozzles. Such an apparatus quickly enough allows you to combine several film panels with your own hands. Most often, a device in the form of a hair dryer is required to perform welding of a film with a low density.

If there is a need to weld the film for the greenhouse in large volumes, then you can use a special apparatus that allows you to make an almost imperceptible welding seam.

Machine for welding polyethylene material

It is very convenient to use a special welding machine to connect film sheets, and welding can be performed as soon as possible. The device that performs welding of greenhouse film is characterized by a rather simple principle of operation. A standard motor through a gearbox makes two wheels move. With the help of a special tripod, a wedge heated to certain temperature indicators is inserted between the film sheets.

The heating temperature of the wedge is controlled by a special thermostat. In addition, the speed of polyethylene advancement is also subject to regulation. The factory-made welding machine must comply with the safety requirements for operation.

The result of welding with such an apparatus is the formation of a double seam with a strength of at least eighty percent. Welding takes place in automatic mode, and manual actions are necessary solely to change the temperature regime of the wedge and the speed of the film web.

Most often, such a device is used in the industrial sector, but it is possible to use it for personal purposes. The manual type of such an apparatus is a kind of industrial hair dryer, but it has less weight.

The device can also be used to work with other types of plastics, which are quite problematic to glue with simple means.

Other bonding methods

Glue greenhouse polyethylene can be in other ways.

• The use of xylene and trichlorethylene heated to a temperature of seventy degrees, as well as through 80% concentration of acetic acid heated to thirty degrees.
• The use of certain types of glue. The best option is to use BF-two or BF-four glue. The surfaces to be bonded must be pre-treated with a solution of chromic anhydride with a concentration of 25%.
• It is advisable to glue the polyamide film with PK-5 glue, and the resulting junction should be ironed with an iron heated to fifty degrees.
• Use of a special super-glue designed for gluing polyethylene materials. Such adhesives have appeared on the Russian market relatively recently, but many gardeners and gardeners have already appreciated the ease of use. The glue is completely odorless, and the strength of the resulting joint is quite sufficient for the use of such material as a coating for greenhouse structures.

Of course, the presence of a personal welding machine in the arsenal of any gardener with greenhouse or greenhouse structures is justified and can significantly save time and effort on gluing films based on polyethylene.

Russian manufacturers produce several special devices that allow you to weld polyethylene at home. The most inexpensive and sufficiently high-quality device for such work is the apparatus of the PP-40 series. In terms of external indicators, such equipment resembles a traditional soldering iron with a slightly modernized tip.

How to glue a film for a greenhouse (video)

The use of such a convenient and modern device allows you to easily and quickly perform high-quality welding work on polyethylene films, regardless of the degree of complexity of the connecting circuit.

In order not to lose the material, be sure to save it to your social network Vkontakte, Odnoklassniki, Facebook by simply clicking on the button below.

How to solder plastic film? And even at home? Yes Yes Yes!!! Even our hardworking female hands can easily do this.

How wonderful to be a needlewoman! Perhaps each of you will say this. Difficult situations for someone are usually not a problem for us.

Take, for example, the covers for textbooks for our children, which is relevant at the beginning of the school year. Surely one of them will not have enough covers of the required format, even if you go around the whole world. Not a problem - we solder ourselves!

Dad is at work, and mom can easily do not dusty, but a little smoky work with the help of a burner.

For those who have never soldered a film, I will say that this is the case:

• simple and does not require super skill,
• allows you to make the product as you wish,
• saves money - materials are available,
• within the power of any woman.

In order to solder the film at home, you need the following INSTRUMENTS and ACCESSORIES :

• Soldering iron, soldering iron or burner - your choice. Be - the tool is very hot, so keep your kids away while working! Don't forget about yourself too. Ventilate the room, as during operation the film melts and emits very acrid smoke.

• Metal ruler. The heating device during the soldering of the film is in constant contact with the ruler. Do you understand why our ruler is old and NOT wooden?

• The substrate for the work is glass or a wooden board. Ordinary glass can break from high temperatures. My choice leans towards a wooden plank.

So the main MATERIAL - This is a polyethylene film of any thickness and color. Many improvised materials can be used as raw materials for work:

• ready files for folders,
• new plastic film
• covers for school textbooks and notebooks (new or old).

IMPORTANT start learning and work itself on a test piece of plastic film!
IMPORTANT work in a well ventilated area!

All prepared - FOR WORK! Everything is done in just a few steps.

STEP 1
We take a film of a certain size and fold it in the desired form. Consider the place of the seam - this is the junction of the two layers of the film.

STEP 2
Lay the ruler on two layers of film and press it firmly with the fingers of your left hand to the surface of the substrate.

STEP 3
With an already heated soldering iron, draw along the edge of the ruler. Do not rush - the movement of the hand is slow, because at this moment two layers of film are soldering.

So you soldered the plastic film at home.

Let's solidify the knowledge. Observe two conditions when working - press the ruler tightly and slowly lead the soldering iron - the seam will be even and relatively strong.

Despite the fact that the seam after soldering is quite strong, products made by soldering should be used judiciously. No need to tear and stretch the soldered seams. Of course you will break them. Nobody doubts. But if you handle these products carefully, they will last a long time.

Where in the economy can we apply the acquired knowledge? What can be made from film? Let's do:

• covers for books, magazines and notebooks,
• small sachets,
• solder documents, certificates (something similar to lamination).

SOME EXAMPLES FROM LIFE.

• COVERS

Over the years of doing needlework, a large number of books and magazines have accumulated at home. In my creative library there are editions of 1960-70s, something I inherited.
You understand that if you do not take care of printed editions, then gradually the covers can become dilapidated and lose their novelty. Homemade covers for them were made in a few evenings. I think now both my children and grandchildren will use these books and magazines.

Here you see covers made of film for notebooks and non-standard educational literature.

• PACKAGES for patterns and all

For any needlewoman, patterns of artificial flowers and all sorts of little things are “bread”. A little time can be spent on sorting these parts, then on making bags, and you will always have order in the needlework corner.

In the same way, we can put things in order in patterns.

• homemade LAMINATION for documents

Every document loves neatness. If you seal it in a film, then it will be stored for many years.

I soldered the film myself - saved on lamination!

I hasten to please you, you will learn how to solder a film at home very quickly. And then, beware! When you get at least one quality seam, you will urgently want to put your knowledge into practice. "Here This need to solder and This, and This also a must!"

But if it’s no joke, then the ability to solder a film is not carried behind your back in a backpack, and there will always be many cases of using it in everyday life.

Good luck to you and see you next time. Irina Timoshek.

Fellow needlewomen and needlewomen, have you ever soldered the film yourself at home?