metrology profession. Job description Job description of the metrologist of the enterprise

Article 11 of the Law of the Russian Federation of April 27, 1993 No. 4871-I “On Ensuring the Uniformity of Measurements” establishes that enterprises, organizations, institutions that are legal entities create, if necessary, in the prescribed manner, metrological services to perform work to ensure the unity and required accuracy of measurements for the implementation of metrological control and supervision.

It is mandatory to create a metrological service or other organizational structures to ensure the uniformity of measurements in the following areas of activity:

1	healthcare
2	Veterinary
3	environmental protection
4	Ensuring labor safety
5	Trading operations and mutual settlements between the buyer and the seller, including operations with the use of slot machines and devices
6	State accounting operations
7	Ensuring the defense of the state
8	Geodetic and hydrometeorological works
9	Banking, tax, customs and postal operations
10	Manufacture of products supplied under contracts for state needs in accordance with the legislation of the Russian Federation
11	Testing and quality control of products in order to determine compliance with the mandatory requirements of state standards of the Russian Federation
12	Mandatory certification of products and services
13	Measurements carried out on behalf of the court, prosecutor's office, arbitration court, state authorities of the Russian Federation
14	Registration of national and international sports records.

The rights and obligations of metrological services are determined by the provisions on them, and the rights and obligations of employees - by job descriptions approved by the heads of legal entities.

The job description of the chief metrologist can include the following responsibilities:

Implementation of a unified technical policy and management of work to ensure the unity and required accuracy of measurements, the implementation of metrological control and supervision at the enterprise.
Ensuring the preparation of the necessary documents for accreditation of the metrological service of the enterprise for the right to verify measuring instruments.
Development of plans for organizational and technical measures to improve production efficiency based on the improvement of metrological support.
Ensuring the storage and maintenance at the proper level of standards and installations of the highest accuracy for reproducing physical quantities, verification equipment and other means of calibrating measuring instruments.
Implementation of interaction on issues of ensuring the uniformity of measurements with the State Committee of the Russian Federation for Standardization and Metrology.
Implementation of control over the elimination of shortcomings identified by the bodies of the State Committee of the Russian Federation for Standardization and Metrology.

The job descriptions for metrologists (engineers and technicians) should include responsibilities for: accounting for measuring instruments; participation in the work of commissions for the acceptance and commissioning of measuring instruments; organization of verification, calibration and repair of measuring instruments; control over the development and correct use of new measuring instruments coming into operation.

INSTRUCTIONS OF THE CHIEF METROLOGIST

General provisions
The chief metrologist belongs to the category of managers.
A person with a higher professional (technical) education and work experience in the specialty in engineering and technical management positions for metrological support of production for at least 5 years is appointed to the position of chief metrologist.
The chief metrologist must know:

3.1. Legislative and normative legal acts, methodological materials on the metrological support of production.

3.2. Profile, specialization and features of the organizational and technological structure of the enterprise, prospects for its development.

3.3. The procedure and methods for planning work on metrological control and production support.

3.4. Organization of metrological support of production in the industry and at the enterprise.

3.5. Production capacities, technical characteristics, design features and operating modes of equipment, rules for its operation.

3.6. Fundamentals of production technology of the enterprise.

3.7. Regulations, instructions and other guidelines for the development and execution of technical documentation.

3.8. The device and rules for the operation of measuring instruments, the organization of their repair.

3.9. Methods for conducting research and development in the field of improving metrological support and measuring instruments.

3.10. The procedure for concluding contracts with third parties.

3.11. Fundamentals of economics, organization of production, labor and management.

3.12. Fundamentals of labor legislation.

3.13. Rules and norms of labor protection.

The chief metrologist manages

During the absence of the chief metrologist (business trip, illness, vacation, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the improper performance of the duties assigned to him.

Job Responsibilities

Chief metrologist:

Organizes work on metrological support for the development, production, testing and operation of products manufactured by the enterprise.
Supervises the preparation of projects and plans for the introduction of new measuring equipment, organizational and technical measures to improve production efficiency, improve metrological support, means and methods of measurement, control and testing.
Ensures the compilation of local verification schemes, the establishment of the optimal frequency and the development of calendar schedules for verification of measuring instruments.
Leads the work on the metrological examination of design and other technical documentation developed at the enterprise, as well as coming from other enterprises and organizations.
Participates in ongoing research on the automation of production processes related to the use of measuring instruments, in the work to determine the needs of the enterprise for these means.
Ensures the introduction of modern methods and measuring instruments, as well as the performance of work on the assessment of measurement errors.
Organizes work on the analysis of the state of metrological support, carrying out metrological certification of non-standardized measuring instruments, development, coordination and approval of methods, instructions and other regulatory and technical documentation for their verification, as well as certification of measuring instruments after restoration, repair, verification.
Carries out control over the equipment of the technological process with all the measuring instruments provided for by the regulations, the compliance of the measuring instruments and methods used in the divisions of the enterprise with the requirements for compliance with the specified production modes and product quality.
Issues instructions aimed at preventing, stopping or eliminating violations of metrological rules and regulations.
Organizes the preparation of technical specifications for the design and development of special-purpose measuring instruments.
Ensures the completion of the exchange fund of measuring instruments, testing and control, storage and comparison in the prescribed manner of working standards, repair and maintenance of samples of measuring instruments in proper condition.
Promotes the implementation of state and industry standards, enterprise standards and other normative and technical documentation regulating measurement accuracy standards, methods and means of verification.
Supervises the work on the preparation of the established reporting and its submission to the bodies of the state metrological service.
Organizes work to improve the skills of metrological service employees.
Supervises the employees of the enterprise who carry out metrological control and metrological support of production.

16.

III. Rights

The chief metrologist has the right:

Act on behalf of the department, represent the interests of the enterprise in relations with the structural divisions of the enterprise, state metrological control and supervision bodies, other state authorities on issues of metrological support of production.
Make proposals to the head of the enterprise on the conclusion of agreements on the lease of unique measuring instruments and test equipment for calibration and other metrological work, as well as agreements on the involvement of third-party specialists in the metrological examination of documentation and metrological certification and the introduction of measurement methods.
Require the heads of structural divisions and independent specialists to provide information necessary to perform work on metrological control and metrological support of production.
Participate in the preparation of draft orders, instructions, instructions on the issues of metrological support of production.
Give instructions to the heads of structural divisions of the enterprise on issues of metrological control and production support.
Submit proposals in accordance with the established procedure on bringing to responsibility officials guilty of violating the rules for the use of measuring instruments, the procedure for metrological support of production.
Prohibit the use of faulty and untested measuring instruments.
Submit for consideration by the head of the enterprise:

8.1. Representations about the appointment, transfer and dismissal of subordinate employees.

8.2. Proposals: on the encouragement of distinguished employees, on bringing to material and disciplinary responsibility violators of production and labor discipline.

Approval and sign documents within their competence.
Independently conduct correspondence with the structural divisions of the organization, as well as other organizations on issues within its competence and not requiring the participation of the head of the enterprise.

11.

Responsibility

The Chief Metrologist is responsible for:

For improper performance or non-performance of their official duties provided for by this job description - within the limits established by the current labor legislation of the Russian Federation.
For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.
For causing material damage to the enterprise - within the limits established by the current labor legislation of the Russian Federation.

And who can count on a salary increase Mark Bershidsky According to a December study by Hays, next year 46% of employers plan to increase their staff. 45% say that they do not plan to increase the staff, but will only deal with...

Raghav Haran, who has worked at major companies including Shutterstock and TrueVentures, wrote about how you can get the job you want, even if you don't have the diplomas and certifications you need. The editors of vc.ru prepared a translation...

Only every tenth employer is satisfied with the level of training provided by higher education in Russia. Companies need to train their own personnel, ceasing to rely on the state and universities. You can’t just become a specialist in demand on the market, although...

Opinions of employers: which employees should be disposed of in the first place Representatives of Mail.Ru Group, Aviasales, Sports.ru and other companies explain. Anna Artamonova, Vice President of Mail.Ru Group First of all, you need to get rid of toxic employees....

APPROVE:

[Job title]

_______________________________

[Name of company]

_______________________________

_______________________/[FULL NAME.]/

"______" _______________ 20___

JOB DESCRIPTION

Chief metrologist

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of the chief metrologist [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. The chief metrologist is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The Chief Metrologist reports directly to [position title of immediate supervisor in the dative case] of the Company.

1.4. The chief metrologist belongs to the category of managers and is subordinate to [name of the position of subordinates in the dative case].

1.5. A person who has a higher professional (technical) education and at least 5 years of work experience in the specialty in engineering and technical and managerial positions in metrological support of production is appointed to the position of chief metrologist.

1.6. The Chief Metrologist is responsible for:

effective performance of the work entrusted to him;
compliance with the requirements of performance, labor and technological discipline;
the safety of documents (information) in his custody (become known to him) containing (constituting) the trade secret of the organization.

1.7. The chief metrologist must know:

legislative and regulatory legal acts, methodological materials on the metrological support of production;
profile, specialization and features of the organizational and technological structure of the enterprise, prospects for its development;
procedure and methods for planning work on metrological control and production support;
organization of metrological support of production in the industry and at the enterprise;
production capacities, technical characteristics, design features and operating modes of equipment, rules for its operation;
fundamentals of production technology of the enterprise;
regulations, instructions and other guidance materials on the development and execution of technical documentation;
device and rules for the operation of measuring instruments, organization of their repair; methods for conducting research and development in the field of improving metrological support and measuring instruments;
the procedure for concluding contracts with third parties;
advanced domestic and foreign experience in the field of metrological control and production support;
fundamentals of economics, organization of production, labor and management;
fundamentals of labor legislation;
labor protection rules and regulations.

1.8. The chief metrologist in his work is guided by:

state and industry production standards;
local acts and organizational and administrative documents of the Company;
internal labor regulations;
rules of labor protection and safety, ensuring industrial sanitation and fire protection;
instructions, orders, decisions and instructions of the immediate supervisor;
this job description.

1.9. During the period of temporary absence of the chief metrologist, his duties are assigned to [deputy position].

2. Job responsibilities

The chief metrologist performs the following labor functions:

2.1. Organizes work on metrological support for the development, production, testing and operation of products manufactured by the enterprise.

2.2. Supervises the preparation of projects and plans for the introduction of new measuring equipment, organizational and technical measures to improve production efficiency, improve metrological support, means and methods of measurement, control and testing.

2.3. Ensures the compilation of local verification schemes, the establishment of the optimal frequency and the development of calendar schedules for verification of measuring instruments.

2.4. Leads the work on the metrological examination of design and other technical documentation developed at the enterprise, as well as coming from other enterprises and organizations.

2.5. Participates in ongoing research on the automation of production processes related to the use of measuring instruments, in the work to determine the needs of the enterprise for these means.

2.6. Ensures the introduction of modern methods and measuring instruments, as well as the performance of work on the assessment of measurement errors.

2.7. Organizes work on the analysis of the state of metrological support, carrying out metrological certification of non-standardized measuring instruments, development, coordination and approval of methods, instructions and other regulatory and technical documentation for their verification, as well as certification of measuring instruments after restoration, repair, verification.

2.8. It controls the equipment of the technological process with all the measuring instruments provided for by the regulations, the compliance of the measuring instruments and methods used in the divisions of the enterprise with the requirements for compliance with the specified production modes and product quality.

2.9. Organizes the preparation of technical specifications for the design and development of special-purpose measuring instruments.

2.10. Ensures the completion of the exchange fund of measuring instruments, testing and control, storage and comparison in the prescribed manner of working standards, repair and maintenance of samples of measuring instruments in proper condition.

2.11. Promotes the implementation of state and industry standards, enterprise standards and other normative and technical documentation that regulates measurement accuracy standards, methods and means of verification.

2.12. Supervises the work on the preparation of the established reporting and its submission to the bodies of the state metrological service.

2.13. Organizes work to improve the skills of metrological service employees.

2.14. Supervises the employees of the enterprise who carry out metrological control and metrological support of production.

In case of official necessity, the chief metrologist may be involved in the performance of his official duties overtime, in the manner prescribed by the provisions of federal labor legislation.

3. Rights

The chief metrologist has the right:

3.1. Give instructions to subordinate employees and services, tasks on a range of issues included in his functional duties.

3.2. To control the fulfillment of production tasks, the timely execution of individual orders and tasks by subordinate services.

3.3. Request and receive the necessary materials and documents related to the activities of the chief metrologist, his subordinate services and divisions.

3.4. Interact with other enterprises, organizations and institutions on production and other issues related to the competence of the chief metrologist.

4. Responsibility and performance evaluation

4.1. The chief metrologist bears administrative, disciplinary and material (and in some cases, provided for by the legislation of the Russian Federation, also criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of their labor functions and assigned tasks.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. The evaluation of the work of the chief metrologist is carried out:

4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Attestation Commission of the enterprise - periodically, but at least once every two years based on the documented results of the work for the evaluation period.

4.3. The main criterion for evaluating the work of the chief metrologist is the quality, completeness and timeliness of his performance of the tasks provided for by this instruction.

5. Working conditions

5.1. The work schedule of the chief metrologist is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production need, the chief metrologist is obliged to go on business trips (including local ones).

5.3. In connection with the production need, the chief metrologist may be provided with official vehicles to carry out his labor functions.

6. Right to sign

6.1. To ensure his activities, the chief metrologist is given the right to sign organizational and administrative documents on issues that are part of his functional duties.

Familiarized with the instruction ___________ / ____________ / "____" _______ 20__

Besides being memorable, .com domains are unique: This is the one and only .com name of its kind. Other extensions usually just drive traffic to their .com counterparts. To learn more about premium .com domain valuations, watch the video below:

Turbocharge your website. Watch our video to learn how.

Improve Your Web Presence

Get noticed online with a great domain name

73% of all domains registered on the Web are .coms. The reason is simple: .com is the where most of Web traffic happens. Owning a premium .com gives you great benefits including better SEO, name recognition, and providing your site with a sense of authority.

Here's What Others Are Saying

Since 2005, we've helped thousands of people get the perfect domain name

We were very happy with Hugedomains quick and easy domain buying service. - Osbel Rodriguez, 11/4/2019
Honestly, I was surprised that my domain was taken but thankfully, it was taken by such a reputable Domain hosting. I am just thankful that it was available and from such a bunch of nice people!! Awesome company and very easy to work with them setting up easy payment terms. Thank you HugeDomains.com for making my business a reality and keeping things simple for us. You are the best!!! - Kelly g. Von-Schilling Worth, 11/2/2019
Very nice experience. Quick and kind answers from the Help Center. - Edoardo Molinelli, 10/30/2019
More

Sample form (example template) instructions:

_________________________________
(name of institution, organization)
___

Job description of the chief metrologist

I approve
______________________________
(head of an institution, organization,
another official
______________________________
authorized to approve
______________________________
job description)
_________ ____________________
(signature) (surname, initials)
"___" ____________ ____

I. General provisions

1. The chief metrologist belongs to the category "Managers".

2. Appointment to the position of chief metrologist and dismissal from it is made by order of the head of the enterprise in compliance with the requirements of the Labor Code of Ukraine and the current labor legislation.

3. The chief metrologist reports directly to the head of the enterprise.

______.

II. Job Responsibilities

Chief metrologist:

1. Organizes work on metrological support of development, production, testing and operation.

2. Manages the preparation of draft plans for the introduction of new measuring equipment, organizational and technical measures to improve production efficiency, improve metrological support, means and methods of measurement, control and testing.

3. Ensures the compilation of local verification schemes, the establishment of optimal frequency and the development of calendar schedules for verification of measuring instruments.

4. Leads the work on the metrological examination of design and other technical documentation developed at the enterprise, as well as the documentation received from other enterprises and organizations.

5. Takes part in tests on the automation of production processes related to the use of measuring instruments, in the work to determine the needs of the enterprise for these instruments.

6. Ensures the introduction of modern methods and measuring instruments, as well as the performance of work on the assessment of measurement errors.

7. Organizes work on the analysis of the state of metrological support, carrying out metrological certification of non-standardized measuring instruments, development, coordination and approval of methods, instructions and other regulatory and technical documentation for their verification, as well as certification of measuring instruments after their restoration, repair and verification.

8. Carries out control over the equipment of the technological process with all the measuring instruments provided for by the regulations, the compliance of the measuring instruments and methods used in the divisions of the enterprise with the requirements for compliance with the specified production modes and product quality.

9. Organizes the preparation of technical specifications for the design and development of special-purpose measuring instruments.

10. Provides a complete set of the exchange fund of measuring instruments, testing and control, storage and verification in the prescribed manner of working standards, repair and maintenance of samples of measuring instruments in proper condition.

11. Promotes the introduction of state, industry standards and other normative and technical documentation regulating the standards of measurement accuracy, methods and means of verification.

12. Manages the preparation of the established reporting and its submission to the bodies of the state metrological service.

13. Organizes work to improve the skills of workers of the metrological service.

14. Supervises the employees of the enterprise who carry out metrological control and metrological support of production.

15. _____________________________________________________________

______________________________________________________________________.

16. _____________________________________________________________

______________________________________________________________________.

17. _____________________________________________________________

______________________________________________________________________.

The chief metrologist has the right:

1. Represent the interests of the enterprise in relations with structural subdivisions of the Company, state metrological control and supervision bodies, other state authorities on issues of metrological support of production.

2. Participate in the preparation of draft orders and instructions on the issues of metrological support of production.

3. Give instructions to the heads of the structural divisions of the enterprise on the issues of metrological support of production.

5. Within the limits of their competence, sign and approve documents.

6. Submit proposals for the management to improve the work related to the responsibilities provided for in this instruction.

7. Make proposals to the head of the enterprise on bringing officials to material and disciplinary liability based on the results of inspections.

8. Within the limits of its competence, report to the head of all identified shortcomings in the activities of the enterprise and make proposals for their elimination.

9. Demand and receive from the heads of departments and specialists information and documents necessary for the performance of his duties.

10. Involve specialists from all structural divisions in the performance of the tasks assigned to him.

11. Require the head of the enterprise (other managers) to assist in the performance of duties and the exercise of the rights provided for in this instruction.

12. _____________________________________________________________

______________________________________________________________________.

IV. Responsibility

The chief metrologist is responsible

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits determined by the current legislation of Ukraine.

2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.

3. For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

4. ______________________________________________________________

______________________________________________________________________.

5. ______________________________________________________________

______________________________________________________________________.

V. The chief metrologist must know:

1. Decrees, orders, orders, methodological, regulatory materials on the metrological support of production.

2. Profile, specialization and features of the structure of the enterprise, prospects for its development, the procedure and methods for planning work on metrological control and production support.

3. Organization of metrological support of production in the industry and at the enterprise.

4. Production capacities, technical characteristics, design features and operating modes of equipment, rules for its operation.

5. Technology of production of the enterprise's products.

6. Regulations, instructions and other guidelines for the development and execution of technical documentation.

7. The structure and rules for the operation of measuring instruments, the organization of their repair.

8. Methods for conducting research and development to improve metrological support and measuring instruments.

9. The procedure for concluding contracts with third parties.

10. Advanced domestic and world experience in metrological control and production support.

11. Economics, organization of production, labor and management, labor legislation.

12. Rules and norms of labor protection.

13. _____________________________________________________________

______________________________________________________________________.

14. _____________________________________________________________

______________________________________________________________________.

VI. Qualifications

Complete higher education in the relevant field of study (master, specialist). Postgraduate education in management. Work experience in the professions of lower-level managers: for a master - at least 2 years, for a specialist - at least 3 years.

- _______________________________________________________________

______________________________________________________________________.

VII. Relationships (connections) by position

1. In the absence of the chief metrologist, his duties are performed by a deputy (in the absence of such, a person appointed in the prescribed manner), who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. To fulfill duties and exercise rights, the chief metrologist interacts:

2.1. With the heads of technical and production departments on:

2.1.1. Receipt:

Applications for measuring instruments;

Reports on the use of measuring instruments in production;

2.1.2. Provisions:

Instructions for the operation of measuring instruments in production;

Consultations on the use of measuring instruments in production;

- _______________________________________________________________.

2.2. With the head of the labor protection department on the following issues:

2.2.1. Receipt:

Information about norms and standards of labor legislation;

Conclusions on the technology of operation of measuring instruments for compliance with safety regulations;

- _______________________________________________________________.

2.2.2. Provisions:

Information on compliance with labor laws;

Applications for conclusions on the technology of operation of measuring instruments for compliance with safety regulations;

- _______________________________________________________________.

2.3. With the head of the department of patent and inventive work on:

2.3.1. Receipt:

Applications for expert evaluation of rationalization proposals and inventions in the field of metrology;

Plans for the introduction of rationalization proposals and inventions into production;

- _______________________________________________________________.

2.3.2. Provisions:

Metrological conclusions at the request of innovators and inventors;

Assistance in solving metrological issues;

- _______________________________________________________________.

2.4. With the head of the department of scientific and technical information on:

2.4.1. Receipt:

Technical documentation on specific issues;

technical literature;

Applications for copies of technical documentation of the department;

- _______________________________________________________________.

2.4.2. Provisions:

Copies of technical documentation of the department;

Original documents for registration, accounting and storage;

Applications and technical literature;

- _______________________________________________________________.

2.5. From ______________________ for questions:

________________________________________________________________

______________________________________________________________________.

2.6. From ______________________ for questions:

________________________________________________________________

______________________________________________________________________.

2.7. From ______________________ for questions:

________________________________________________________________

______________________________________________________________________.

Supervisor
structural unit

"___" __________ ____
AGREED:
Head of the legal department
______ ______________________
(signature) (surname, initials)
"___" __________ ____
Familiarized with the instructions:
______ ______________________
(signature) (surname, initials)
"___" __________ ____

Like? Like!

It is mandatory to create a metrological service or other organizational structures to ensure the uniformity of measurements in the following areas of activity:

	healthcare
	Veterinary
	environmental protection
	Ensuring labor safety
	Trading operations and mutual settlements between the buyer and the seller, including operations with the use of slot machines and devices
	State accounting operations
	Ensuring the defense of the state
	Geodetic and hydrometeorological works
	Banking, tax, customs and postal operations
	Manufacture of products supplied under contracts for state needs in accordance with the legislation of the Russian Federation
	Testing and quality control of products in order to determine compliance with the mandatory requirements of state standards of the Russian Federation
	Mandatory certification of products and services
	Measurements carried out on behalf of the court, prosecutor's office, arbitration court, state authorities of the Russian Federation
	Registration of national and international sports records.

The job description of the chief metrologist can include the following responsibilities:

1. Implementation of a unified technical policy and management of work to ensure the unity and required accuracy of measurements, the implementation of metrological control and supervision at the enterprise.

2. Ensuring the preparation of the necessary documents for accreditation of the metrological service of the enterprise for the right to verify measuring instruments.

3. Development of plans for organizational and technical measures to improve production efficiency based on the improvement of metrological support.

4. Ensuring the storage and maintenance at the proper level of standards and installations of the highest accuracy for reproducing physical quantities, verification equipment and other means of calibrating measuring instruments.

5. Implementation of interaction on issues of ensuring the uniformity of measurements with the State Committee of the Russian Federation for Standardization and Metrology.

6. Implementation of control over the elimination of shortcomings identified by the bodies of the State Committee of the Russian Federation for Standardization and Metrology.

INSTRUCTIONS OF THE CHIEF METROLOGIST

I. General provisions

1. The chief metrologist belongs to the category of managers.

2. A person with a higher professional (technical) education and work experience in the specialty in engineering and technical management positions for metrological support of production for at least 5 years is appointed to the position of chief metrologist.

3. The chief metrologist must know: