Relief painting. Textured wall painting: step by step instructions. How to paint walls with textured paint

Today, people are increasingly striving to equip their homes in an original way, avoiding platitudes and clichés. In this sense, decorative wall painting is a rather interesting solution: it is possible to create incredible textures, artistic images and color combinations. Shops abound with goods for every taste. Therefore, without much hassle, you can decorate the interior in style, even without professional design training.

The work surface needs to be cleaned. Often there are traces of old paint, whitewash, wallpaper paste on the walls. They all have a different chemical composition, substances interact with each other in different ways, and if you still want to re-paint the walls, this can adversely affect the final result.

Preparing the surface for painting

In some cases, previously pasted wallpaper cannot be removed from the wall - then it is advisable to use an alkyd primer. It is recommended to dilute it with white spirit in a ratio of 1 to 3, mix thoroughly, apply to problematic areas of the walls.

Another important point concerns the removal of dirt, oil and grease stains, fungus (fungal damage is typical for rooms in old buildings, as well as in conditions of high humidity). Treat oil stains with acetone or pure gasoline. Simply apply a little to a dry, lint-free cloth and wipe the areas where you see greasy dirt.

Examine the wall for old cracks. Most likely, they will also be found. Prime cracks with as dense a substance as possible, preferably finely dispersed and with high adhesion. The most common materials are cement or gypsum, or a mixture of both. Apply the solution after wetting the cracked areas with water (this way you maximize the adhesion of the “native” material of the old wall and the primer).

What paint to choose

The choice of paint is useful to start long before you get into the process closely. It is not very reasonable to grab the first thing that comes to hand at the very last moment from the store counter. In addition, you must definitely try the properties of the purchased paint somewhere in a separate place.

What is it for:

see how it dries (does it leave cracks, quickly or slowly, does it change its original color);
find out if the paint will exude a pungent odor (sometimes manufacturers write that the paint is neutral, but in reality it turns out that the paint contains sharply smelling fractions - this is unacceptable for living rooms);
make sure that the paint consumption corresponds to that indicated on the package (this value is very arbitrary, because you can never determine with absolute accuracy how thick the layer you apply and how much substance will go per unit square area).

Attention! When buying a product in a store, do not forget to look at the expiration date and expiration date, so as not to buy expired paint with changed characteristics.

It should be noted that decoration through painting can be done in two ways:

using a special textured paint (the option is more expensive, since such paint has a high price, although it is worth it!);
using ordinary wall paint, but combining different colors (in the form of stencils, patterns).

The consistency of wall paints is quite liquid. When applied, there are no lumps, furrows or sagging. Painting is usually carried out in several layers. The exception is the use of a spray gun. With its help, it is possible to evenly paint over every centimeter, but in most cases it will be manual work. The brush and roller are your tools.

Attention! Apply the paint only on a completely dry surface - after all cleanings, primers, etc. Otherwise, you will have defects after the new paint dries.

Observe uniformity in the speed and amount of paint applied. Start with those sections of the wall where it is planned to place wall furniture in the future, hang a panel or carpet, where there is minimal illumination.

This is necessary so that possible defects are not as noticeable as in the most central places. Apply each next layer after the previous one is completely dry.

Attention! Apply the very last, final layer in the direction of the light rays falling on the surface.

decoration

Buy at the store or make your own stencils. Suitable material for:

thin sheet plastic;
a piece of thin linoleum;
thick oilcloth, etc.

The point is that the shape does not collapse after a few strokes with a roller or brush. If this is not taken care of in advance, the edges of the form will become uneven, and the applied pattern will have a blurry outline.

stardust effect

A simple and at the same time interesting design technique: “specks” are applied to the dried surface with paint of a different color. To do this, you need to take a rough brush with a hard bristle, dip it into the paint, wring it out carefully, and only then “splash” it in the right place: bend the bristle in the opposite direction, and then release it. Practice in advance somewhere else to achieve the desired quality.

The decoration turns out to be very original when you paint the walls in the same color, but in a different color - separate sections or different walls of the same room. Perhaps it will be large rhombuses or squares, stripes, circles, stains. Draw a design on paper in advance and act based on the picture.

aging effect

Another name is stippling. On a plain surface, apply glaze in a contrasting color. Use a wide flat brush for this. Without waiting for it all to dry, repeatedly touch the surface with the same rough brush (or take a rough round brush). Spread the "touches" either completely over the entire surface, or zoned. As a result, an original texture is formed, and no traces of brush stains will be visible.

Attention! The same can be done not with a brush with a brush, but with a rough dry sponge. The main thing is that the mechanical intervention should be performed in a certain style (the same nature of the touches, their more or less uniform frequency).

Pattern effect chaos or abstraction

Make a simple roll with a "torn" coating. It will help you apply finely divided wall paint so that irregular shapes appear on the walls. Naturally, the applied layer should differ in color from the main one.

Video - Applying an abstract pattern with a "torn" roller

You will need:

acrylic primer;
vinyl paint in two shades;
mother-of-pearl azure;
decorative paper.

The procedure is priming and painting, applying paper and wrinkling it, painting again, removing excess paint from the folds of the “skin”.

Video - Decorative wall painting with wrinkled leather effect

Applying textured paint

In terms of characteristics, textured paint is very close to textured plaster. But the paint is more “thin”, and therefore more plastic. Its use gives a stunning effect - exquisite surfaces that will please the eye for a long time with an exclusive decor.

Due to what the relief is obtained:

Additionally, you can refine the coating as follows. After it dries, apply ordinary paint of a contrasting shade to the main layer with a soft brush, and not everywhere, but in some places - you get an original, chic decor. Some craftsmen use not even one, but two or three contrasting colors, applying them in a special cascading way. If you want the same, be sure to train in advance, because without skill it is unlikely to succeed.

Advantages of textured paints

The industry of modern finishing materials provides the widest field for a bold experiment. You are not limited in anything, and you do not need to be specially trained, to acquire any specific skills. Enough embossed painter and experimental courage in artistic decoration.

Textured paints, although they are more expensive than the usual "smooth", but have a number of undeniable advantages:

Such a wonderful product is ready to use, and even the most unprepared decorator can work with it.

The ideal alignment of the walls for painting is a long, tedious and rather costly job, from which many people try to get away by using drywall and losing part of the usable area. But now you can do it easier, saving not only time, but also money. This will allow you to make textured painting of the walls with your own hands with special compounds, which will be discussed here.

Textured wall paint is produced in the form of a thick viscous mass based on an acrylic, mineral or silicone binder, which includes fillers that give the surface a relief. It can be colored and white. Mineral compositions for finishing facades can also be sold in the form of a loose mixture, which is diluted with water.

For reference. In the white version, mainly water-soluble paints are produced, which can be tinted independently using special pigments.

The walls already finished with it are difficult to distinguish from those on which decorative plaster and ordinary paint have been applied. That is, the effect is almost the same, but do-it-yourself textured paint is applied much easier and faster.

Types and sizes of filler

According to the type of particles included in the composition for density and relief, texture paints are divided into compositions with the following fillers:

Granite or marble chips;
Crushed gas silicate;
Quartz sand;
Metal particles with reflective properties;
Sawdust;
Natural and synthetic fibres.

They may also include modified starch and other thickeners, as well as special pigments that give the coating the effect of silk or mother-of-pearl. In shape, these particles are most often scaly or drop-shaped.

And the depth and severity of the future relief depends on their size:

Fine-grained paints include paints with a filler diameter of up to 0.5 mm;
To medium-grained - 0.5-1 m;
To coarse-grained - 1-2 mm.

Application area

Like all other paints and varnishes, textured paints, depending on the composition, can be used for both exterior and interior work. Therefore, before buying, you need to familiarize yourself with the recommendations of the manufacturer.

As for the type of base on which they can be applied, it is:

Wood;
Plaster;
Concrete;
Brick or stone masonry.

Manufacturers and prices

Despite the fact that this material is relatively new, texture wall paints are produced by many manufacturers.

Among them, the following brands are especially popular:

Ecoroom;
organic;
Clavel;
amourcoat;
GALAMIX;
Bayramix;
Balticolor and many others.

The price depends on many factors: the type of binder and filler, the presence of unique additives, color, manufacturer. It is rather difficult to voice the average cost, since the spread is large.

For reference. For example, a 20-kilogram can of Prorab Sandeco textured paint from Bayramix costs about 1,500 rubles. The same volume of SuperDecor paint from Balticolor will cost 4,000 rubles. And Arabesco from Clavel is already 9400 rubles.

If you want to save money or create something of your own, there is a way to make textured paint with your own hands. To do this, add clean sawdust, granite chips or quartz sand to acrylic paint. The latter are sold in hardware stores. But select the initial composition carefully, taking into account where you plan to use it - on the facade or in the interior.

Stages of applying textured paint

Before applying paint to the walls, they must be leveled. But not to perfect smoothness - but simply by level. Small irregularities and cracks can be left untouched: the composition is applied in a fairly thick layer, it will perfectly hide everything. In addition, the relief surface visually masks small flaws.

Note. Of course, the surface must be durable, without crumbling and falling off pieces. And to ensure good adhesion, it must be treated with a deep penetration primer. Preferably on the same basis as the paint itself.

Decorative work on painting surfaces with textured paint is divided into two stages. This is the preparatory stage and the application of the dye itself.

Training

This work is not difficult, but mandatory.

It will mainly determine the durability of the coating:

It is necessary to carefully check the treated wall for any deformations, even the smallest ones, which over time can damage the integrity of the textured layers.
A prerequisite is the removal of the old surface coating, complete cleaning of the walls and getting rid of possible defects. The maximum allowable height difference is about two millimeters.
To improve the adhesion of the coating to the work surface, it is worth covering it with a primer (see Primer for walls for painting - types and tasks), created on the basis of acrylic. A number of primers must be applied evenly, and the color solution must exactly repeat the note of the selected paint. After applying the primer, you need to wait for its complete drying, which will last from three to five hours.

Application

For plastic, this finish is not used, the plaster simply will not hold, but when applying, you must adhere to a certain set of rules:

Before the start of painting work, the container filled with the prepared mixture must be brought to a degree value that is typical for a room.
Next comes the process of mixing the composition, which is best done with a special construction mixer.

Attention: It is allowed to add water to the composition of the paint, the amount of which should be two or three percent of the total volume of the dye.

You need to know exactly which texture will be ideal. Already in accordance with this, it is necessary to supplement the mixture with the necessary proportions of special additives. The overall consistency will depend precisely on how much of such a filler will be taken for the total mass.
As a rule, “texture” is applied in 1-2 layers in stages. This will be enough to achieve the desired result. After finishing the work, you will have to wait a day for the paint to dry completely.
Despite the fact that hardening occurs after a quarter of an hour, it is necessary to allow the paint to dry completely. It is then that it will acquire the desired texture and shade, and the interior will not look unfinished.

Tools and resulting effects

The texture of the finished wall will depend not only on the type and size of the filler, but also on the method of applying paint to the wall. There are formulations that come with clear instructions on how to proceed. But for most embossed wall paints, you can use different methods and tools to achieve different textures.

Brush or brush. After applying textured paint to an area of 1.5-2 square meters, a wide and fairly rigid brush is taken, with which lines are applied to the surface in any direction: vertical, horizontal, cross, wavy, etc.

Comb. With it, you can get a more pronounced and rare relief, using the same method.

Putty knife. Rough rare strokes of paint are applied to the surface treated first with a thin layer, which are shaped into a stone. Perhaps this is the most difficult method for self-production.

An ordinary roller with a fur or foam rubber coat (see). Rolling it over fresh paint, you can get a uniformly rough surface, the relief of which will depend on the type of fur coat.

Figured roller. This is a roller with an embossed surface, with a convex pattern that is imprinted on freshly applied paint. To work with it, a section of the wall must be processed to the full height from floor to ceiling so that the pattern is not interrupted.

Natural sponge, crumpled paper or cloth. All these devices are used according to the principle of facing - that is, they stamp the surface with “bumping” movements, as it were.

Even your own rubber-gloved hands can become a tool. You can draw patterns with your fingers or set prints over the entire surface.

When working with textured paint, the main thing is not to be afraid to experiment. For example, you can apply strokes of different colors with a brush, and then blend them with a large soft sponge.

But no more than 15 minutes are allotted for any decoration - then the paint begins to dry. Therefore, it is recommended to apply it in small areas. Or work in tandem with an assistant.

Advantages and disadvantages

This material has a lot of advantages:

The ability to mask various minor defects and uneven walls without puttying them;
Creation of a homogeneous seamless surface;
The possibility of finishing with your own hands with a spectacular result and saving money on the services of specialists;
Resistance to mechanical damage, moisture resistance, vapor permeability;
Absence of harmful toxic substances.

However, it also has disadvantages. First of all, this is the need to completely remove the coating if in the future you want to change the finish to a smooth interior paint or wallpaper.

And a big expense. For 1 sq.m. the surface of such paint may require from 600 grams to 1.5 kilograms. What affects the final cost of finishing.

Conclusion

If you've never worked with textured interior paint, it's best to practice on a piece of plywood or an inconspicuous area of the wall first, getting your hands full and experimenting with the texture. And to understand the technology of creating a particular relief, carefully watch the video in this article and other training and demonstration videos.

Modern manufacturers of building materials and materials for renovation offer many tools for modeling and interior design. Textured paint is no exception.

Textured (structural, textured, embossed) paints allow you to create a special original texture and surface structure, both for internal wall surfaces and facade ones.

This is explained by the fact that embossed wall paint is a thick, coarsely dispersed mass, which, in addition to acrylic, includes inclusions of various structures (drop-shaped, scaly, and so on) due to which the necessary texture is created.

Thus, structural wall paints are a godsend for those who want to update the design of their home quickly, in an original and quite simply.

Textured wall paint in the photo:

Structural paint application methods

The final appearance of the painted surface largely depends primarily on the composition of the paint used and the texture filler. However, the way the paint is applied plays a very important role in obtaining the desired result.

As a rule, structural paint is applied with a roller, spatula, sponge or brush, that is, in the traditional way.

But pneumatic spraying of embossed paint also takes place. Ultimately, not only the appearance of the surface to be coated, but also the consumption of the source material depends on the method of applying relief paint to the walls.

So, how to apply textured paint:

brush painting

For this method, it is better to choose a wide brush. On the prepared surface, the paint should be applied in large strokes in any direction. To get a more or less uniform texture of the wall, you must first perform horizontal and then vertical strokes. It is also possible to apply arbitrary patterns on the wall with a brush.

Roller painting

When applying relief paint with a roller, two conditions must be met: there must be at least three rollers: two of the same size and one of a smaller size. Two rollers of different sizes are involved in the main painting.

They must be completely lowered into the source material and gradually applied with vertical strokes to the wall, first with a larger tool, and then, if necessary, correct inaccuracies with a smaller roller. At the end of the work, be sure to check the thickness of the applied layer and, where there is too much paint, remove it with a clean, dry roller.

Spray surface coating

It should be noted that structural paint is available in a spray gun. It should be applied with care, because the thickness of the application with this method is difficult to catch. Therefore, before you start applying paint to the wall, it is worth trying to spray paint on a piece of wood or drywall.

Spatula application

A spatula as a tool for painting surfaces with textured paint is the best suited when using thick embossed paint with a coarse filler or, if you want to get a non-uniform surface, and single various volumetric strokes. The spatula can be soft for a more “delicate” texture and hard, respectively, for a rough relief.

Sponge application

The photo of applying textured wall paint with a sponge speaks for itself. This is an opportunity to bring any of your creative ideas to life. The best way to satisfy the creative hunger for those who want to draw.

Also, applying paint with a sponge makes it possible to use a variety of stencils when painting.

The depth of the texture in this case depends on the "grain" of the sponge.

Do-it-yourself textured wall paint

Relief paint can be prepared independently at home.

To do this, it is necessary to mix acrylic paint for the corresponding work (external or internal), for example, with granite crystals. Such crystals are sold in bags in hardware stores and will help give the painted surface the look of a sparkling mineral.

If you add special sand to the acrylic paint to give relief, the wall will take on the appearance of a surface painted with colored sand. You should not experiment and use the sand that can be found on the beach or by the river.

It is also possible to combine different structures. For example, to the main large relief applied with a brush, add small bright inserts of sand islands or stencil pictures applied with a sponge.

Embossed wall paints: pros and cons

Pros:

Huge variety of textures and colors
Simplicity and speed of application
The ability to hide irregularities and various damage to the walls

Minuses:

Structured finishes require 15-30% more paint than plain finishes.
Re-staining is possible only after the removal of the first

More interior photos:

Today, uneven painting of walls and ceilings is gaining great popularity, in which several colors are used or a pattern or texture is added. It is not difficult to achieve a stylish design - just use textured painting techniques or apply ready-made design developments (special rollers). This method of processing walls and ceilings allows you to bring a new breath into the interior, emphasize the originality of the residents, and also save money.

Textured painting will give your walls a unique style

Benefits of DIY textured finishes

In decorating walls, two varieties can be distinguished - this is the use of a special textured paint or an appeal to finishing techniques. In the first case, you should go to a hardware store and buy a special paint that contains acrylic and other components. It lies on the surface unevenly and the effect of granulation is obtained. Textured paint for walls and ceilings has several advantages:

reliably covers and masks irregularities;
you can paint the wall with your own hands, since the composition is easy to lie down;
not combustible mix, coloring interferes with development of a mold;
environmentally friendly;
not afraid of mechanical impact.

Textured painting with a homemade roller

The second type of decor is when painting is carried out with a conventional water-based composition using stencils or special application methods. The advantages of this method are:

low cost of work;
greater color variety;
the use of two-piece rollers for applying a pattern;
convenience and the ability to do it yourself.

Preliminary procedures

Before any decorative work, the wall or ceiling must be cleaned of old wallpaper and dust. If there are gaps, then they are sealed with putty. Leveling is an important preparatory step, because this way the structural paint will look more aesthetically pleasing and last longer. The primer completes the procedure, which neutralizes excess wall moisture and helps the patterns look brighter.

Don't forget to prime the wall before painting.

The next step will be to bring the water-based paint, which has a thick composition, to a more convenient form for work. It is diluted with water and mixed. It is easier to do this with a drill whisk attachment. Textured paint should also be diluted, while adding filler. To give color in both cases, color is mixed into the composition.

Stages of staining with embossed paint

A big plus of structural paints is that they themselves are not uniform in composition, and after additional manipulations, you can achieve a grainy, wavy surface and more complex options, similar to marble patterns and “baked” paint. The workflow is quite simple:

using a spatula, a mass is applied to the treated surface of the wall, distributing and ensuring that the layer is not too thick, but not thin;
you can apply water-based paint with a roller or brush, then the effect will be different;
to give additional texture, a staple, hard sponge or other means is used;
the wall will dry for about two hours, but the final water-based or textured paint will dry in a day;
the surface is fixed with varnish, wax or acrylic.

Types of texture compositions

As options for structural paint, you can buy mixtures that give the walls a peculiar design:

Relief - obtained by adding quartz chips, sawdust or other granules to the paint.
Atacama - an option when a velvet surface with uneven coloring is formed on the wall. The composition includes particles of metals and quartz sand, which have.
Marseille wax is an imitation of stone obtained by applying wax paint on top.

"Atacama" - paint interspersed with quartz sand and metallic pigments

Texture Techniques

When working with enamel or water-based paint, the technology changes in that it is necessary to apply a thin layer. Let's highlight the ways of decorating the walls:

Stencils. The simplest method is when a drawing is first made on thin plastic, oilcloth, linoleum, blanks are cut out, after which they are fixed and water-based paint is applied. This is a quick way, especially if you use purchased samples.
Spraying. After the wall has been painted uniformly in one layer, a second color is sprayed on top, spraying water-based paint with a brush or brush.
Using a homemade roller. Initially, a roller is made with their own hands, for which they take an ordinary construction one, foam pieces are imposed or glued on it, and a fabric is tied. After that, a water-based coloring material is applied to the wall or ceiling with such a roller. This allows you to achieve the effect of spotting.
Application of a roller for double staining. Stores sell double rollers attached to each other. One is applied to the main color, and the second has convex patterns printed on the wall or ceiling. It is necessary to pass with such a tool vertically so as not to disturb the sequence of the pattern.

Do-it-yourself relief drawing

The meaning of the technology is to scratch the pattern with your own hands using available means.

First, the wall (or ceiling, if the interior is in the style of natural stone) is painted in the traditional way. After that, a spatula (regular or notched) is taken, with the help of which patterns are created, drawing it vertically or horizontally, in a circle, making waves and so on.

Such methods include the use of a hard brush, combs, sponges, which are passed over the wet layer, getting peculiar paths, scratching. Also suitable is the method of "wetting" the wall or ceiling with crumpled paper or applying and tearing off cellophane. If you use a brush and apply it repeatedly, then you get the effect of aging.

In order to create an unusual interior with your own hands, it is enough to turn on your ingenuity and find all kinds of improvised means at home with which you can easily make textured painting, and maybe discover a designer vein in yourself.

The disadvantage of this method is that we reduce the internal area of the rooms.

After that, putty, wallpaper, oil paint or wall panels are applied to the resulting structure.

Recently, textured wall paint has become popular, which allows you to level surface irregularities up to 2-3 mm.

It can be applied to any surface, and when using special additives, it can be used both for and for exterior painting of building facades.

The relief and pattern is formed through the use of fillers.

Types of textured wall paint

Textured paint is a thick dispersion mass, the basis of which is a polymer.

The relief is formed by special fillers. Manufacturers offer ready-made water-soluble paint, usually white.

Various shades and colors are obtained by adding colors (special pigments). Substances based on mineral binders are sold in powder form. They are simply diluted with water according to the instructions, the main area of \u200b\u200buse is facade decoration.

The use of polymer binders allows the surface to withstand mechanical and climatic external influences.

Classification of paint by type of surface

According to the type of surface, textured wall paint is divided:

Relief. These are paints with the help of which numerous and varied structures are obtained, which are formed due to various fillers. As a filler, most manufacturers use natural quartz chips. Apply paint with a flat spatula.
Marseille wax. These paints imitate the structure of natural materials (cork, stone). To protect against moisture and give depth to the color, the paint layer is coated with wax. Widely used in restaurants, swimming pools and offices.
Atacama. The paint has a velvety surface with excellent reflective effects. The effects appear as a result of the use of metal filings, the relief is formed by quartz sand, and the base is acrylic.
mizuri. The basis of the paints is acrylic, and modified starch is used as a binder, all this is diluted with water. With the help of these paints, both a smooth surface and embossed textures are created.
Pearl Blend. Distinguished by its unique pearl luster. Pearlescent pigment is finely ground and added to the acrylic base with the addition of water. The effect of wet silk is obtained by applying the finished mixture with a roller, in different directions.

As we understand, a competent choice will allow you to create an original and unforgettable design of your home with your own hands.

By size and type of filler

To create relief and density, the following fillers are used:

Particle shape

Drop-shaped.
Scaly.

According to the particle size of the filler

Fine-grained - particles have sizes up to 0.5 mm.
Medium-grained - particles have sizes from 0.5 mm. up to 1 mm.
Coarse-grained - particles have sizes from 1 mm. up to 2 mm.

Key Benefits of Using Textured Wall Paint

Thanks to a balanced multicomponent composition, we have a number of advantages:

The composition of the paint includes only environmentally friendly components. The composition is completely hypoallergenic.
High resistance to moisture. Possibility of use in a bathroom, a bath, pools, kitchen.
Easy to wash and clean painted walls.
The paint does not absorb the smell and is not afraid.
The covering is steady against mechanical loadings, ultra-violet radiation and frosts.
Can be used on almost any surface
- Masonry.
- Brickwork.
- Concrete surface.
- Wood.

It is enough to apply one layer, does not require fixers and additional operations.
No special skills are required to use. Can be used for interior and exterior walls.
Paints of this type have high elasticity, which allows them to be used in new buildings, and the surface does not deform when the building shrinks.
Large selection of colors, and also has good decorative properties.

disadvantages

The disadvantages include 2 factors:

The first factor is that if you decide to make repairs, you will have to completely remove the textured paint from the wall, and this is a laborious process.
The second factor is the high cost. For a high-quality drawing, consumption per 1 sq.m. is from 650 gr. up to 1500 gr.

It should be noted that paint consumption depends on the pattern on your wall surface.

It is also possible to use special varnishes to increase the effects.

That is, the shade, and the color of the picture will look different depending on the light.

How to paint walls with textured paint?

Surface preparation

We start with the preparation of the surface of the walls, as mentioned above, chips, cracks and irregularities up to 2-3 mm are allowed. The most important thing is to align the walls in a plane, usually a building one is used for this. Moreover, the very texture and relief of the future paint will visually hide most of the defects.

We process the prepared surface. You should wait for the primer to dry completely, which is about 4-6 hours to a day. The rate of drying of the primer is affected by humidity and room temperature. There are times when two coats of primer are required.

Paint preparation

The next step is the preparation of the paint itself. We bring the paint into the room for several hours, so that it takes the ambient temperature. Some paints have temperature and humidity restrictions, so read the instructions carefully before use.

If you want a smooth surface of the coating on the wall, then you should add ordinary water, no more than 1% of the paint volume. If relief is required, then add fillers. To give the desired color to the paint, add color. Regardless of the added components, the entire volume should be thoroughly mixed to obtain a homogeneous mass.

Mixing should be done only with a construction mixer, and not by hand.

Application

The layer should be thick, but not more than 1.5 cm. Sometimes paint is applied in two layers. The second layer is applied only after the first has completely dried.

Complete drying of the layer occurs after 24 hours. We apply paint in small areas of approximately 1.5-2 sq.m.

And do not forget that the setting of the paint on the walls already begins 15 minutes after application. In these 15 minutes, a decorative pattern should be applied.

Drawing tools

To apply a decorative pattern, you can use the following tools:

Lacquering

After applying the pattern and completely drying the paint layer, the surface should be varnished or waxed. This is done so that the color and texture last for a long time.

Manufacturers and price

This is a fairly new material in the construction market. But, despite this, there are quite a lot of manufacturers of this product.

The price depends on the manufacturer, filler, binder, color, presence of special additives in the composition.

Now we will voice the most popular brands:

Ecoroom,
Bayramix,
amourcoat,
organic,
Balticolor,
Clavel,
GALAMIX.

Categories

Popular