Floor vase made of paper pipes. Options for making a vase for flowers from a pipe. To create a do-it-yourself cardboard floor vase, you will need

What makes our home truly cozy? Of course, nice and stylish little things! An important element that complements the design of your apartment or house can be floor vases.

And here is the good news for you: it is not necessary to spend a lot of money on expensive designer novelties. Floor vases can be made with your own hands, and from rather ordinary raw materials!
Today you will learn how to make a beautiful floor vase from waste material with your own hands easily and efficiently.

Ready to create? Then let's go!

Do-it-yourself floor vase from a jar

Sometimes you can create the most unusual things from the simplest materials. Look at this vase, would you think that the usual three-liter jars served as the basis for it? That's it!

Admit it, you want one? Then take out the reserves of creative energy from your pockets and go!

To create a floor vase from a three-liter jar, you will need:

• Two cans with a volume of 3 liters;
• One tea saucer;
• One plastic container from canned food;
• PVA glue;
• Cardboard trays for eggs;
• Silicone glue "liquid nails";
• acrylic paint;
• Decor elements of your choice;

Stage No. 1

We create the basis of our vase. To do this, we take two jars, fasten the bottoms with silicone glue, and glue a saucer turned upside down to the neck of one of the jars. It will serve as a stable foot for the future masterpiece.

Then we cut off the plastic container from the canned food and attach it to the neck of the upper jar with glue.
We leave to dry during the day.

Stage No. 2

During this period, we can soak pre-shredded egg cartons in water until completely limp. After that, the cardboard should be squeezed out well and mixed with PVA glue until a homogeneous mass is obtained.
We apply the gruel on the base of our vase in an even layer.
We leave for two days.

Stage No. 3

After the workpiece is completely dry, we level the texture with alabaster.

Stage No. 4

In this form, the vase is completely ready for the final stage of decoration - decoration. Use your own imagination or the tips that we will give below.

Do-it-yourself floor vase from plastic bottles

Another great waste-free recycling option. Do not throw away plastic bottles, you can create real masterpieces for your home from them!

A floor vase from plastic bottles can be made in different styles. For example, an ordinary five-liter bottle with a cut neck, wrapped in thin birch bark, can be an excellent option.

Idea: "Dress" a plastic bottle in a stylish "sweater" crocheted or knitted. Such know-how will pleasantly surprise guests and fill your home with comfort and warmth.

Floor vase made of cardboard and papier-mâché

Yes, yes, you read that right, you can also make a stylish floor vase out of cardboard. It is indistinguishable from an expensive designer one, just believe me. And if you don't believe it, see for yourself.

To create a do-it-yourself cardboard floor vase, you will need:

• Cardboard tube (can be taken from under the linoleum roll);
• Thin cardboard;
• hot glue;
• Newspapers and papier-mâché egg trays;
• polymer putty;
• Sandpaper with fine dusting;
• PVA glue;
• Acrylic lacquer;

Stage No. 1

We attach a pipe to the cardboard base and draw a shape for the future vase. We make 30 identical patterns, cut them out.

Stage No. 2

We glue the cardboard blanks to the pipe, evenly distributing them around the perimeter. Leave for several hours until completely dry.

Stage No. 3

Glue the base of the vase with pieces of newspaper sheets in several layers.

Attention: the layer of paper must be dense enough so that the voids are not visible during subsequent finishing.

Stage No. 4

We soak egg trays in water, wring out and mix with PVA glue. Apply an even layer on the base, let dry.

Stage No. 5

Coat the vase with putty in an even layer. When the mass dries, we level the texture with sandpaper.

Stage No. 6

We decorate the vase. It is convenient to do this with spray paint of any color. On top, you can finish in the style of decoupage, stucco or apply an ornament manually using acrylic paints.

Stage No. 7

We cover the surface with acrylic varnish, leave to dry.
That's all the tricks. Do-it-yourself papier-mâché and cardboard floor vase is ready. Enjoy!

Floor vase from a pipe

Everything is quite simple here. If after the repair you still have unnecessary plastic or cardboard pipes in your house, do not rush to send them away, it is better to make a wonderful vase out of them.

A stylish do-it-yourself pipe floor vase is easy, practical and beautiful.

Just wrap a cardboard or plastic pipe with newspapers, attaching them to PVA glue, paint white with acrylic paint and decorate.

Idea: use old nylon stockings to decorate a floor vase from a pipe. Soak them in PVA, squeeze them well, and then put them on the prepared pipe. Distribute over the entire area, creating curly folds. Let the workpiece dry, and then paint and decorate to your liking.

Do-it-yourself floor vase from newspaper tubes

The now fashionable paper vine weaving technique allows you to create lovely crafts from waste material.

In order to make a chic wicker floor vase with your own hands, you will need:

• Newspaper tubes (about 400 pieces);
• PVA glue;
• Scissors;

Stages of work:

1. We carry out cross weaving 4 × 4, then we fix it with one tube around. This will be the basis of our future vase. Then we perform seven rows of ordinary circular weaving around the base, gradually spreading one tube at a time.
2. After that, we begin to remove the walls of the vase, bending and weaving the previously divorced tubes. Moving up, we gradually expand the space of the product up to 22 rows inclusive.
3. Then we weave evenly without breeding for about ten rows, we cover the product with varnish.
4. Then weaving continues, narrowing the rows and tilting the tubes inward to the product until about 72 rows.
5. We expand the neck of the vase for 12 rows and complete the weaving by creating sides in 3 rows. Cut off the rest of the pipes.
6. We cover the product with a thin layer of PVA, wait until it dries completely. Then comes the final stage of finishing - varnishing. This should be done several times in a row.

DIY floor vase decor

There can be a lot of options for decorating a floor vase, the most trendy of them: wrapping with twine, decorating with glitter, silicone glue, as well as good old decoupage.

Of course, the vase should be decorated in accordance with the style of the room, and the method of its external decoration will depend on this.

Well, since we already have a beautiful vase ready, we can think about how to fill it.

Please note that not all types of home-made masterpieces are suitable for live bouquets, which means that we will also make flowers for floor vases with our own hands.

When creating an artificial bouquet, use the most common tree branches. It looks very beautiful and natural. At the same time, an eco-style vase for greater harmony with the bouquet can not even be painted.
Attaching balls from the remnants of knitting threads to the branches is an excellent and economical option for needlewomen.

In any case, do-it-yourself decorative branches for floor vases have not gone out of fashion for a long time. So feel free to use them in decorating your own home.

No matter how fashion changes, needlework is always in trend. Remember that from the simplest and cheapest materials you can create masterpieces of design art. The most important thing is imagination and a creative approach to business.
Do-it-yourself floor vase is easy, beautiful and stylish. Create and be inspired.

Good luck!

DIY floor vase: secrets, techniques and unexpected solutions updated: April 23, 2018 by: dekomin

A large floor vase adds zest to the interior, the room looks more interesting. It's even better when this vase is made by hand.

The variety of models is amazing, but one thing unites them - they are made from simple improvised materials. Anyone can make such a vase.

DIY floor vase: features

As a rule, floor vases are heavy and large. The heavier the vase, the more difficult it is to tip over and break. Therefore, if the floor vase is made with your own hands and turned out to be light, you can pour heavy stones into it. Perfect for pebbles.

Be patient, because this work is not fast, even if you decide to make the simplest model of a floor vase with your own hands, simply by decorating it. Be prepared for the fact that the product is large, it will take time to place the rhinestones and sequins in their places. Not to mention the complex elements.

Do-it-yourself floor vase: materials and methods

From the basic materials you will need scissors, glue, a vase mold and those details or substances with which you can decorate the vase.

Cardboard vase

An interesting solution was to make a vase out of cardboard. This is the most budgetary and very convenient option, because the vase can be given a variety of shapes and sizes.

Think about the size and volume of your vase. Cut out the sides of the cardboard box and tape them together. Treat the upper cut at the neck with plain, colored or paper tape so that the edge does not fluff.

Glue the vase with decorative elements. In this case, these are small pebbles planted on glue tightly to each other. One disadvantage of such a vase is that you will have to decorate the cardboard with a dense canvas without gaps. And if you suddenly decide to leave gaps, then they need to be painted over. It is impossible to prevent guests from suspecting that this is a budget version of a vase. Therefore, the cardboard should not be visible in any way.

Don't stop at just decorating a vase. Decorate it further. For example, stick dotted small and large rhinestones.

Metal-painted vase

An interesting solution was a vase painted in metallic color and aged. To work, you will need a form for a vase, small figures, details, buttons, laces, glue and paint. If you want to get the effect of an aged thing, then the paint should be of two colors of a dark and light shade that combine with each other. For example, if these are warm shades of metal, then the colors should be dark metallic and gold for an aged effect. If you have chosen cool shades, then the colors range from metallic gray to silver.

As a form for a vase, an elongated square cardboard box or a pipe from linoleum is suitable. In the second case, the vase will turn out to be round and elongated.

Treat the top edge of the vase by gluing a protruding strip, or just wrap it with tape. Paste the form with prepared small details, grouping them with a dense cover or patches, combining them with large figures.

Wait for the glue to dry before you can start painting. First apply dark paint, preferably in two layers, so that extraneous shades do not shine through. If you decide that the craft should be aged, then use a large brush with dotted strokes of light paint only over the protruding parts, creating a worn effect.

If you want the vase to be plain, then after staining you can varnish the surface. And if the vase is aged, then in this case it is not necessary to varnish, otherwise the desired effect will not work.

Take your time and wait for the vase to dry, it can take about a day.

Floor vase decorated with threads

You will need a large container. Also, for a form that can be decorated, a pipe from linoleum is suitable. Also stock up on threads, glue and small elements that you want to finish the composition with. For the pattern, the same thread glued over the general background, as well as buttons, rhinestones, or even voluminous flowers from threads, can be suitable. This is what a vase decorated with three-dimensional flowers will look like.

How to make such flowers will be described below, but first make the vase itself. To do this, coat the finished vessel with glue and wrap tightly with a thread. It must be applied in one layer. Let the vase dry.

If you want to decorate a vase with flowers, then they need to be made separately, and then fixed on the vase. There are two color options, these are the ones shown above and from the floss on the spring.

To make the same flowers as in the picture above, you will need a bottle, cling film, glue and thread. Put cling film on the bottle and on the film across the bottle, start making one petal for the flower. Fold the shape of an elongated drop from a piece of thread. Spread glue on the next piece of thread, a little more than the previous one, and wrap the first drop around the outer edge, repeating the shape and firmly pressing the layers of thread. You will get a drop, which with each layer of thread will become more and more.

Continue until you feel that this petal size is sufficient. Wait for the craft to dry and peel it off the bottle. You have only one petal in a curved shape following the shape of the bottle. And for a whole flower you need 4 or 5 petals. Do the same until you get the required amount.

Glue the petals to the vase and plant a large rhinestone or bright button in the center, the flower is ready. Do not stop there, make a magnificent pattern consisting of several elements.

Now consider the option of a multi-colored flower made of floss threads and springs. To do this, you will need threads of a beautiful color, a long wire, a pen and a rhinestone, either a bead or a button for the center of the flower.

Wrap the wire about 6-7 cm around the handle, you will get a spring. Connect the edges, you get the shape of a drop. Starting from the bottom, pass the thread from one end of the spring to the opposite end, rising to the top of the petal. Follow the same thread path back to the base. The petal is ready. For a whole flower, they will need 4 or 5, at your discretion. Fix the flower on a vase, glue a rhinestone or a button or a bead in the center.

Choose eco-friendly materials for a vase that will stand in a living room. You should not risk your health and put materials in the house that release toxic compounds into the air.

Be patient, because to make a beautiful vase means to make a complex product. Before getting its final appearance, the vase goes through several stages: cleaning, decorating and in some cases painting.

Choose a color scheme and material for decorating a vase that fully matches the style of the room in which you plan to put the finished floor vase. Otherwise, a feeling of disappointment may arise, and all the work will go down the drain.

After repairs, there is always a lot of garbage in the house, but you should not rush to throw it away, because among it there will definitely be some interesting items that, after decorating, can look like great accessories. An example of this are pipes that can be turned into stunning vases. Next, we'll look at several ways to do this.

Vases from plastic pipes

stocking decoration

First of all, consider how a vase is made from a plastic pipe with your own hands. For these purposes, it is best.

So the instruction looks like this:

• If there is a segment longer than 60 cm, it must be divided into 3 parts.
• Next, the ends of the blanks need to be cut obliquely.
• Then you need to soak the stockings with PVA glue and squeeze out the excess suspension.
• After that, the stockings need to be pulled over the pipes to end up with twisted folds.. In this form, the product must be left until the glue dries.
• Further actions depend solely on your imagination, for example, products can be painted with different colors and glued together. For stability, a cardboard circle or square can be glued to their bottom. As a decor for crafts, beads, beads, small seashells, etc. are an excellent option.

The result will be a very beautiful product that will look expensive, despite the fact that the price of materials is minimal.

In the photo - the implementation of the combined decor

Combined decoration

The technique for performing the product in this case does not differ from the one described above. The differences are only in the way of decoration.

The process looks like this:

• The stockings are stretched from below and above the blanks, and a “naked” area remains in the middle.
• The space between the stockings must be smeared with PVA glue.
• Next, the surface treated with glue should be sprinkled with grits. Which one is up to you to decide.

• After the glue hardens, the blanks need to be glued and painted. For stability, you can make a cardboard stand and paint it in a suitable color.

This completes the manufacturing process.

From a metal pipe

If the edges of the metal pipe are evenly sawn off, then it is also suitable for our purposes. The best option is to prepare it immediately with a stand.

Below we consider one of the options for how to make a floor vase with your own hands from a pipe of this type:

• First of all, the blank must be pasted over with ordinary toilet paper. In this case, small folds are allowed.
• Then two layers of black paint should be applied to the paper.
• After that, over the black paint, you need to apply varnish with bronze powder.
• Additionally, the product can be decorated with beads or glass beads.
• To complete the bottom, you will need mounting foam. The craft must be placed on a plastic stand and direct the stream of foam down. When the foam hardens, it can be tinted with spray paint.

Advice!
Unusual edges of the product can be made using a welding machine, simply by melting them.
As a result, they will turn into a fancy lace.

Of course, such a product is not intended for fresh flowers, since it will not be possible to pour water into the container, but the composition of dried flowers in such a vase will look very interesting.

From a cardboard tube

Manufacturers of linoleum, when packing it inside the roll, lay a pipe made of thick cardboard, which is an excellent material for making a vase. As always, to get an original result, you just need to show a little imagination.

Below we will consider one of the options for making a vase from a cardboard tube with your own hands. Before starting work, the following materials must be prepared for this product:

So, the work is done in the following order:

• As in the case of plastic products, in order to make vases from linoleum pipes with your own hands, you first need to cut a cardboard blank into three parts.
• Next, all three parts must be glued with PVA glue and pulled together with copper wire.
• Without waiting for the glue to dry, you need to stick masking tape on the joints.
• After a day, when the glue finally hardens, the copper wire should be removed, after which the workpieces should be wrapped with a cloth dipped in PVA. In this case, you need to form folds.
• When the fabric dries, it must be painted with bronze paint. You can use the composition in a spray can.
• When the paint dries, you need to “walk” over the entire relief with acrylic gold paint to give the vase a shine.
• At the end of the work, the vase can be decorated with twine or other decorative elements.

On this floor vase from a pipe from linoleum is ready. Of course, it is not necessary to perform all the steps exactly. Based on this idea, you can experiment and come up with your own product design.

If you recently made repairs at home, then there is always a bunch of unnecessary garbage and our advice: do not rush to throw it into the garbage chute, in this pile you can always stumble upon objects that will be useful in inventing fakes - these can be various design details and various decorations for your home. Most often, unnecessary items are the remaining pipes that no one needs, from which you can invent a beautiful designer vase. There are several methods for reproducing our vase.

So, first consider the types of vases made of plastic pipes.

Mounting

We will decorate with the help of unnecessary nylon stockings.

But before using the stockings, we will get acquainted with the creation of the silhouette of a vase using plastic pipes. It would be great if these pipes were designed for sewerage. They fit perfectly in shape and material.

Now let's move on to the manual, which will describe the sequence of work and actions:

Composite decoration for a vase

The sequence of actions is practically no different from the first version of the creation of the invention, but there is still a slight difference and it lies in the fact that the methods of decoration are different.

Now let's move on to the very process of inventing a vase using this method:

1. We put on the pipes, which we also prepare, as in the first version, hosiery on both sides so that a small empty gap remains in the middle of the pipe.
2. We apply a small amount of PVA glue to this empty gap so that it is smeared over the entire area.
3. Now we pour cereals of any type on this smeared gap, depending on your imagination.
4. Let's wait until the glue hardens, and attach the pipe sections to each other and paint them in different colors, depending on your wishes.

At this stage, we finish making a vase using cereals.

Making a vase from a metal alloy pipe

If you still have an unnecessary metal pipe, whose edges are cut evenly, then it will come in handy for creating our crafts. If the pipe has an edge, then it is perfect for us because you do not need to create a stand for the vase, it will be ready right away.

Using this type of pipe, we will get acquainted with the technique of its creation through the following steps:

1. To begin with, we will take a roll of ordinary cheap toilet paper and glue our pipe in a circle so that there are no empty gaps. Small wrinkles are allowed.
2. Now we need black paint, and with it we paint the pipe in two layers, to give it a natural look.
3. Next, take the powder with the effect of the powder and apply it with gentle movements over the black paint.
4. For special beauty, you can decorate a vase with beads or beads.
5. With the help of mounting foam, we create the bottom of our product. We make it this way: we put the craft on a plastic stand and we put the stream of foam in a vertical position. After waiting until the foam dries, it is allowed to paint the bottom with spray paint of any color.

Take note! We can embellish the edges of our beautiful vase with a welding device by welding them a little. The result is beautiful metallic lace.

I hope you understand that it will not be possible to place fresh flowers in this type of vase in the way that they require water, and it will not work to pour it into such a craft, but do not be discouraged, it is perfect for placing dry or inanimate flowers of various varieties in it. In it, they will look aesthetically pleasing and tasteful.

Making a vase from a cardboard product

If during the repair you ordered the right amount of linoleum to your home, then we note that a cardboard tube is placed inside each such roll so that it does not wrinkle and disperse. But for the end result,

you just need to show a little of your imagination.

Today, only lazy people do not improve the design of their home. Fashion trends allow satisfying the most sophisticated tastes of demanding consumers. At the same time, at all times there was a demand for decorating the interior with high floor vases. However, their affordability does not always coincide with the desired appearance. Like any other thing, a floor vase can be made by hand. Such a beauty will be in the desired shape, and in the desired color scheme, and much cheaper than their store counterparts.
Materials for work:
Glass jar with a capacity of 3 liters - 2 pcs.;
Tea saucer - 1 pc.;
Plastic container from preserves - 1 pc.;
Silicone sealant - 1 bottle;
PVA glue liquid (construction) - 1 liter;
Building alabaster - 4 tablespoons;
Potato starch - 100 gr.;
Egg lattices - 4 pcs.;
Vegetable oil - 1 tbsp;
Vaseline - 1 tbsp;
Three-layer napkins - 2 pcs.;
Plasticine - 1 box;
Old tube of PVA glue with a narrow nose - 1 pc.;
Glue "liquid nails", white and "gold" paints, blush, eye shadow, face powder, brush, colorless acrylic varnish, water.

Stages of work:
The first stage: we form the basis.
We turn one jar upside down and glue “liquid nails” to it a tea saucer turned upside down.

Glue the bottom of the second can to the bottom of the same can.

Cut off the bottom of the canning container. We glue the inverted container to the neck of the second jar.

Let the base dry for 1 day.

The second stage: we give the vase the outline of the vessel.
Finely chop the egg racks.

Fill with water so that the entire torn mass is immersed in it. We leave for the night.

We wring out the soaked grids.

Tear off large pieces. Fill the whole mass with PVA glue.

Thoroughly, until a homogeneous gruel is obtained, mix the soaked grates.

We fill the space between the neck of the jar and the container with the egg mass.

Apply a thin layer of egg mass over the entire surface of the jars.

We dry the base for 2 days.

We paint white.

The third stage: we apply a three-dimensional drawing.
Print your favorite stencil.

We make cuts along the contours, cut out the necessary points.

We place the drawing on the vessel in a checkerboard pattern in a straight and inverted form (2 times above, 2 times below; top and bottom facing each other).

Draw voids and cuts with a pencil.

Squeeze silicone sealant into an empty PVA tube.

We put a sharp nose on the tube and squeeze the sealant along the contour of the picture.

If necessary, make adjustments with a toothpick.

Dry the sealant for 1 day.

With superficial movements with a large brush, we apply blush toning on the drawing.

Fourth step: make a silicone mold.
Mix potato starch and silicone sealant.

Thoroughly knead until a pasty mass is obtained.

We coat the surface of the figure blank (in this case, a magnet) with Vaseline.

Press the pastry into the flattened dough with the right side down.

Carefully prying with a knife, we take out the workpiece.

Fifth stage: casting the figures.
Lubricate the inside of the silicone mold with vegetable oil (pour it in, then turn the mold over and pour out the oil).

Pour a tablespoon of alabaster (or gypsum) into the container.

Add a spoonful of water there, mix. If the solution becomes thick, add water.

We fill the silicone mold with alabaster solution.

We leave the solution to harden (you can check the readiness by pressing the nail on the figure - the trace should not remain on the surface). We pry the figure with a knife and take it out of the mold.

We repeat the preparation of the solution and pouring 3 more times.

Sixth stage: paint the angels.
We paint over the blanks with white gouache.

The bodies of the angels are matted with face powder.

We dye our hair.

We draw sponges.

Draw the eyelids and eyebrows with a pen.

With white gouache we close the extra layer of powder (next to the bodies of the angels).

Draw the wings in gold.

We apply “liquid nails” on the back surface of the figurines and glue them on the vase.

Step 7: Make roses.
We knead the plasticine, lay it on a hard surface with a thin plate, cut it into squares. In each square we make cuts in a circle from the center.

Gently prying the central center, twist the spiral, moving from the center to the edge. We bend the square corners like large leaves.

We paint the roses white.

We tint them with blush in the color of the volumetric pattern.

The edges are gilded.

"Liquid nails" fasten the roses to the vase.