What can be done from propylene pipes. What can be done from plastic pipes? Coffee table with top

Either from a desire to save money, or from an overabundance of imagination, our people have learned to benefit from those objects and things that a pedantic European would have sent to a landfill long ago. Greenhouses are built and palm trees are made, cute garden figurines are made of, and any garden furniture can be assembled from. Scraps of plastic pipes left after repair can also be used to good use. They make the simplest decorative things, beds, chairs and even greenhouses - there is a huge scope for imagination, and we have collected only the most interesting ideas for crafts from plastic pipes that can serve as a guide to action or a source of inspiration.

Pipe connection methods

Plastic pipes are like designer parts. By combining segments of different lengths and connecting them at different angles, you can get anything: a beginner will be glad that he built the simplest hanger, and a professional will easily assemble a bunk bed. The main thing is to be able to connect the pipes correctly, and then it will be possible to do any thing necessary in the household.

Plastic pipes are a collective name, and which are made from polymers. The greatest demand is and. Segments of different lengths and diameters remain after the repair of engineering networks in an apartment or in a country house, and, as a rule, they are cluttered in pantries, or rather cluttered, until enterprising craftsmen began to use them for other than their intended purpose. Plastic pipes are characterized by low weight, high strength and durability, they are easy to maintain and safe.

Polypropylene pipes are connected using a special welding machine. It is expensive - it is more profitable to rent it, and it will take a little time to learn how to work with it. You can use compression fittings to connect. In any case, the assembled product will be non-separable.

When it comes to plastic pipe crafts, usually refers to PVC pipes, which can connect with each other in the following ways:

socket connection with rubber seal. Manufacturers supply socket pipes with a rubber seal located at the end, thanks to which pipe connection work is carried out simply and quickly, and the joint is sealed. At the first stage, the socket of one pipe and the smooth part of the other are cleaned of dust and dirt. A chamfer is removed from the smooth end of the pipe (an angle of 15 degrees, chamfering cutters can be used) and a mark is applied indicating the depth to which the pipe will go into the socket. The sealing ring of the socket and the smooth part of the pipe are lubricated with a silicone compound and inserted one part into the other, focusing on the mark. For plumbing and sewerage, this is a good connection, but if you are assembling shelves or furniture, then it is not rigid enough. The main advantages: simplicity and the possibility of dismantling, therefore, such a connection is used for the construction of temporary buildings and things;
adhesive connection. The ends of the pipes to be connected are chamfered (some just sand the surface), then marks are made indicating the depth of the fitting. The ends of the pipes are degreased with methylene chloride, then the adhesive is applied with a brush to the pipe and inside the chamfer or socket. The pipe is inserted into the fitting (or socket), rotated ¼ turn for better distribution of the adhesive, then the elements can be pressed for 30-60 seconds. It is desirable to carry out all work quickly. The remaining glue is immediately removed, and the connection is allowed to dry for several hours. The process is more laborious, but the joint is more reliable;
flange connection. Separate sections are connected using special fittings. Before performing work, the ends of the pipes are cleaned. A flange is put on the cut, then a rubber gasket, onto which the flange is pushed. The elements are connected by means of bolts with a counter flange. Then the bolts are evenly tightened, due to which the alignment of the flanges is achieved. The connection is reliable, the design is collapsible.

When the technology for connecting plastic pipes has been mastered, we can assume that almost any craft can be done. It is only important to draw a sketch in advance or make a drawing, and correctly calculate the length of all segments. You can build anything from such parts - we will list only some ideas for crafts from plastic pipes with our own hands.

No. 1. Organizer

The most unpretentious way to use the remains of plastic pipes. You can take pipes of small and medium diameter, even segments of small length will fit. The first option is a mobile organizer. It is enough to cut segments of different heights and glue them together in an arbitrary order or following some pattern (for example, one higher segment in the center, the rest around it). Such a stand is suitable for storing office supplies near the desktop or for organizing all kinds of bolts and other fasteners in the workshop.

The second option is stationary. On the one hand, the pipe must be cut at an angle (the most popular option is 45 degrees, but it can be less if small elements are stored). Then the cut elements are attached to a vertical surface using. You can mount the organizer elements on a wall or a specially installed board.

No. 2. Decorative frame or partition

Thin rings, which are easy to obtain when cutting plastic pipes, are a versatile material for creating decor. You can use pipes of different diameters - it's even more interesting. Plastic rings make a wonderful frame. It is enough to draw a layout of the future product on paper in advance and glue individual rings directly on it. From them you can get both a strict symmetrical pattern, and something chaotic. If you then paint it, then such a frame for a mirror or a picture can hardly be called a simple craft - it will be a cool designer thing.

Similarly, you can get a decorative partition. Gluing, of course, will take a little longer, but the effort is worth it. The partition will look very interesting, weigh a little and come in handy, for example, to delimit zones in the bathroom.

Number 3. Shoe rack and wine bottle holder

There are a lot of options to organize the storage of clothes using plastic pipes, and all these crafts are quite simple to implement.

No. 8. Rack for living room, hallway, pantry

By connecting several pipe sections in the required order, you can get a practical and inexpensive rack that will fully satisfy your needs in terms of size, shape and configuration. It can be both quite modest in size, and a real giant. If the rack is located in the living room, then the pipes can be painted, and glass or plywood can be used as countertops. When it comes to or a workshop, there is no particular need for decoration.

No. 9. Football goal

If the summer cottage has, then you can build a small football goal. Only a few connections will need to be made, but before that, of course, everything will have to be carefully calculated and measured. When the frame is ready, a mesh is put on it, and the gate is ready. When the kids grow up, the product can be disassembled, and the pipes can be reused to create other crafts.

Similarly, you can make a small children's playhouse. We all once loved to build huts, gather there with a company and play. It was especially cozy and mysterious. The frame for the house of pipes is made elementary. Children will only have to throw a thick fabric over it and enjoy their own little castle.

No. 10. Arena for children

There is nothing complicated in the design of the playpen. However, the finished product in the store is not cheap. A budget alternative is available to those who have a decent amount of plastic pipes in stock, the time and desire to learn how to connect individual segments into a single structure. For manufacturing, you will need a lot of pipes, so home craftsmen advise you to just buy them in a store - it will still turn out cheaper than a ready-made arena, and the pipes can then be reused.

After the arena scheme has been created with an indication of its dimensions, pipes are cut. Vertical partitions are interconnected by short horizontal sections of pipes at the top and bottom. However, variations are possible in the design of the arena.

No. 11. Chairs made of plastic pipes

Here you will need already confident skills in connecting individual pipe sections. Depending on your desire and degree of preparation, you can make a simple children's stool, as well as a comfortable chair for adults, or even an armchair. After the frame is ready, the seat is made. It can be woven from thread, rope, or use a dense fabric. Then you can put soft pillows on top. Having mastered the manufacturing technique, it will be possible to build almost all the furniture for a summer residence.

No. 12. bunk bed

Yes, it is quite possible to assemble a frame for from ordinary plastic pipes. Not only supporting elements are made of pipes, but also a ladder, and, of course, lamellas under. The level of complexity here is increased, it is better to take up the work for those who have already tried their hand at making simpler crafts. Do not neglect drawing up a drawing and scrupulous measurements.

A bed made in this way will be a real godsend for a country house of a small area, because not everyone can afford to buy a ready-made bunk bed for the dacha, but somehow it is necessary to solve the placement problem.

No. 13. garden arch

How beautiful the arches entwined with plants and flowers look in the garden. The main difficulty in making a garden arch from plastic pipes is that individual segments will have to be bent. The easiest way to give the necessary shape to the pipes is with a gas burner. A separate section is heated to a state where the material will succumb to deformation, then it is given the necessary shape. Someone decides not to bother and just connect several pipe sections at an angle. Then the upper part of the arch will resemble a trapezoid or a polygon in shape. Between the two arched vaults, horizontal elements are attached so that in the future the arch will be as much as possible covered with greenery. Do not forget to securely fix the structure in the soil.

No. 14. Alcove

Building with plastic pipes is much easier than anyone can imagine. If you take long enough segments, then you don’t even have to connect anything. Two pipes of the required length are arched and fixed to the ground. The distance between the elements of the future frame should be such that a dining table or other items fit. It remains only, and everything is ready.

The design of the gazebo may be slightly different, resembling a house in shape. In this case, you will have to connect individual elements.

No. 15. carport

The design itself is simple, but the difficulties can be associated with a decent size of the canopy, because it must be wide and high enough so that the car can safely hide under it. The frame is assembled with special care, fastened to the ground and to the adjacent wall, if any, covered with a dense awning fabric on top, which will protect the car from the scorching sun and rain. To call this product a handicraft, even the tongue does not turn - this is already a small architectural form.

No. 16. Greenhouse

A small greenhouse is done elementarily. You will need a few pipes, there will also not be very many connections. After the frame is assembled and fixed in the ground, it remains only to cover it with agrofibre. It will be possible to make such a greenhouse in just a couple of hours, and the benefits from it will be enormous.

No. 17. Greenhouse made of plastic pipes

A full-fledged build, of course, is more difficult than a greenhouse. It will take a lot more material, and it will take a lot of time. The size of the greenhouse can be almost any. The procedure is as follows:

From pipes, you can make a frame for a greenhouse of almost any shape, but the arched one remains the most preferable.

No. 18. seedling containers

If in the country every square meter counts, then it's time to implement the idea of vertical gardens. Thus, it is convenient to grow greens and some berries. Scraps of plastic sewer pipes will make excellent containers if you cut holes in them in advance for seedlings and the outflow of excess water. It remains only to fill the soil containers and place the vertical beds one above the other. You can attach them again to the stand of plastic pipes. Some connect the beds with ropes and hang them from the wall - there are many options.

When making major repairs in apartments, the owners buy to replace old heating systems and other work with a margin of several meters.

The remains should not just be thrown away, because these pipes can serve as excellent material. for the manufacture of useful and functional things for a cottage or a playground.

For the manufacture of crafts, plastic pipes that have served their time are also suitable. After dismantling, they can be given a second life.

And polypropylene (PP) pipes are divided into several classes, in the table examples of species are given, which are suitable for non-standard do-it-yourself use:

Summer residents show imagination and create useful and beautiful things for their sites from almost any pipe.

DIY crafts for summer cottages and gardens

You can make a fully functional thing that will help make housekeeping easier, or you can make a garden decoration or even furniture for relaxing on the site.

Consider examples of crafts made from plastic pipes for a summer residence, a vegetable garden or a garden.

frame for cucumber greenhouse

Pipes cut to desired length, a frame is assembled from them. Two walls and cross bars for rigidity.

The ropes are pulled so that the cucumber bushes rise up, clinging to them with their antennae.

As long as the temperature outside is lowered, seedlings are covered with foil. They simply throw it over the structure, and press the ends with stones on the ground.

Greenhouse

A frame for a greenhouse is assembled from reinforced pipes. On the picture presented the simplest- large arches for the film.

A base was assembled from a thick board, to which pipes are attached using connecting elements. Plastic gently fold and screw to the other side of the base. The whole structure is covered with a film.

Also, with the help of connecting elements, you can add cross bars for stability, and even come up with doors.

Greenhouses made of plastic pipes are not affected by the environment, do not rust and do not burst in frost. However, they are very light and can turn over in a strong gusty wind, especially if the greenhouse is covered with polycarbonate.

Aviary for chickens

It is assembled according to the same scheme as wooden counterparts. For sustainability need to add extra straps on the floor and walls. The roof of the enclosure is made from or also from PVC pipes. The walls are covered with a metal net-netting with a small square.

The advantages of this design:

ease of assembly;
durability;
weather resistance;
economy.

By the same principle, you can build an aviary for a small dog.

Clothes dryer

In the country, such a light and small dryer for towels or children's things is useful. To assemble it, you need plastic pipes and connecting elements.

It is not necessary to put the structure on legs. You can make a folding version on chains. The dryer will be attached to the fence or to the wall of the house.

sun shade

From waterproof fabric, for example, from shower curtains, an awning is sewn. Then put on the pipes on both sides, bend them and fix them on the ground. Provides lightweight construction which will create shade on a hot day.

Below it is a table with chairs. A great option for a recreation area in the garden.

Some craftsmen buy pipes specifically to assemble a real plastic gazebo.

To create such a gazebo it takes time and effort, But it's worth it. It turns out a strong, durable and beautiful design.

Chair

In a gazebo made of pipes, there can be plastic home-made chairs. frame assembled from short cuts connected by special elements. After assembly, the product is measured and the seat is sewn from durable fabric.

Original garden decoration

In addition to functional things, you can collect unusual decorations for flower beds and garden paths.

Dinosaur skeleton will decorate the yard on the eve of Halloween. To create it, PVC pipe cuts and connectors were required.

Designs for children

Remains of polypropylene PVC pipes will serve as a good material for creativity, from which with your own hands you can make not only crafts for giving, but also various devices for children, examples in the photo below.

Arena

Budget and safe option. The pipes are smooth and easy to clean. Can be assembled any size and shape, no sharp corners.

For assembly you will need:

tees 90 degrees straight;
angular tees;
pipe cuttings;

First, the main lower frame is assembled by putting straight tees on it. In the corners use corner tees for connection. Next, the transverse ones are inserted and the upper frame is fixed.

bunk bed

Furniture in stores is very expensive, why not assemble a bed for babies with your own hands?

This design is made of reinforced pipes and connectors with internal threads. The bed turns out easy and strong, maintains loading to 90 kg.

Sports section

Remains of a reinforced pipe and threaded connectors are useful for stairs. The main thing - fasten securely to the wall. Tees are put on the two main long pipes, they are connected by transverse crossbars. At the top you can make a horizontal bar.

Baby chairs

A good option for a summer residence. Chairs are assembled from pipe scraps and connectors, then sew a seat from dense fabric. If you take the fabric from the shower curtain, then the chair can be safely left on the street.

The main advantage of these chairs is their lightness. The child can easily move it anywhere.

Football goal

Craft for young athletes. This is the simplest design to create it you will need:

pipes;
metal scissors;
connectors - angled, tees;
soldering iron;
plastic clamps;
grid.

Two pipes are connected into rods, the other 4 into two corners. The design is assembled taking into account the fact that a straight pipe should enter the tees on the rods, then solder everything with a soldering iron. The mesh is stretched and tightly fixed with clamps from all sides.

children's tent

Such a house can be placed right in the apartment. It is light and safe because it has no sharp corners. The shape and size can be any.

First assemble the structure, then sew curtains and fasten them with Velcro to take off easily.

Swing

You can assemble the swing. The main thing well fix the structure in the ground to keep it stable.

In order to swing, the swing is mounted on connectors of a larger diameter than the pipes on the base. The seat is made of plywood or plastic.

How to bend plastic pipes?

There are three ways how to bend pvc pipe:

preheat it. This method is suitable for long pipes.
Fill the pipe with sand. This is how short cuts are bent.
Find a spring that fits in diameter and length, insert it into the pipe and gently bend it.

Conclusion

If even after the crafts there are extra pipes, then you should not throw them away. Perhaps they useful to some of the friends and acquaintances.

If there is nowhere to put them, then it is better to take the scraps to a recycling point.

In contact with

Today we will share with you another useful ideas for country crafts made from ordinary plastic pipes, the remains of which since the advent of the country water supply system are probably gathering dust somewhere in the attic.

In any case, the price of the issue here is simply incommensurable with the opportunities and inspiration that these affordable plumbing wonders will give you.

Let's start, perhaps, with utilitarian structures intended for the garden and vegetable garden.Greenhouses, greenhouses and light frames on the beds for sheltering plants, assembled from polypropylene pipes and connecting elements, are a very budget option that combines low cost and ease of assembly. If necessary, they can also be easily dismantled.

In addition to the theme - strong and stable racks for growing and working with seedlings. PVC pipes of a larger diameter, neatly sawn from above with a jigsaw and filled with soil - a compact and aesthetic option for planting greenery.

Crafts from plastic pipes in the style of vertical gardening of a terrace or flower garden design confirm that everything ingenious is simple!

What can we say about the organization of a portable drip irrigation system, indispensable for lawn irrigation or a mobile design for a watering hose. All the benefits are there!

No less in demand in the country economy are such trifles as a woodcutter, a garden cart, a gate or a stand for spinning rods. Admit it, it never crossed your mind, did it?

For orderly storage of garden equipment and tools - a few more useful ideas that are just asking to be implemented immediately.

Pieces of pipes fixed on a wooden plank can serve as supports for pencils. And vertically arranged cylinders can serve as a supply for tools. To prevent tools from falling down, the bottom of the pipes can be foamed with mounting foam.

Yes, we almost forgot about parking for bicycles and scooters in case guests arrive. Plastic pipes come in handy here too!

In the country, it is customary not only to work, but also to indulge in idleness. Simple designs of garden furniture, assembled from polypropylene pipes, will help you relax and unwind in a shady corner of the garden.

Do you want such a chair for babies made of PVC pipes? This is well within our power!

You will need for the frame (I write in inches, so as not to customize, whoever needs it will translate, I would just use an inch ruler):
8 pieces of elbow
6 T-pieces
1 PVC pipe (choose good quality, durable) cut into 16 pieces:
7 pieces per 10 inches
2 pieces for 6 inches
4 pieces for 4 inches
4 pieces by 5 inches.
For the seat:
29.5" x 17.5" fabric, 1/2" mid-seam.

Sewn on the long side. The seam is turned over to the middle of the back side, but this is up to you.

The short sides are sewn together, leaving a hole for eversion.

The short sides are tucked in 3 inches and sewn.

To cut the pipe, you will need special scissors or a hacksaw / saw, and best of all, a strong man with the necessary skills.

The cut parts are assembled according to this scheme.

Can be painted, but after painting it was difficult to assemble, the thickness of the pipe has changed, so that should be painted after assembly .
It is said that 100% acetone erases the inscriptions from the pipe.

How do you, for example, comfortable models of chairs? Choose for every taste!

How about a comfortable garden swing?

A comfortable sun lounger, an impromptu canopy for a morning meal in the fresh air, or such a “life hack” stand model that allows you to train on a treadmill without leaving the Internet? Cheap, reliable and practical!

In the country, you always need reliable shelves

Children in the country are a separate burning topic. The ubiquitous children must be given the opportunity to play and misbehave in such conditions that parents are calm.

For kids, right in the country, you can assemble such a convenient playpen or a cozy toy house. These designs are easily transferred to the garden or to the veranda, and your child will always be in your field of vision.

Older tomboys will surely enjoy playing with water. Build just such an impromptu "car wash" from plastic pipes, and the joy of the kids will be no limit. By the way, a great way to wash the child without forcing, without driving him into a common shower.

Well, since we are talking about water procedures, take advantage of these useful ideas for towel dryers and air mattresses. Do you have a swimming pool on the site?

Finally, we bring to your attention some interesting ideas for the design of a country interior. Pay attention to the original coffee tables and a compact TV stand.

A shelving unit constructed from plastic tubes for storing laundry, clothes hangers and even a bunk bed. For jacks of all trades, there are no unconquered peaks!

If you cut PVC pipes into thin rings, you will get a universal ornamental material, from which both a wonderful frame for a mirror and a decorative partition will come out. You will need glue, a stencil and a flat surface.

Small sections of wide diameter pipes make excellent racks for storing shoes, towels in the bathroom, as well as cute bottle holders. Or here's another, enchanting idea for decorating the hallway!

Creative and textured bookshelves, a hanger in the hallway or the simplest wardrobe fixture, assembled from ordinary plastic tubes, are a great way to get rid of routine and boredom at home.

And what, you thought this is all that can be created with the help of plumbing fixtures? No matter how! The pinnacle of engineering, we meet - table lamps and floor lamps. Unexpected, right?

Well, until you regain consciousness, another blow to the theory of Darwinism - elegant floor lamps and lampshades made of plastic pipes. Are you weak?

Here are some useful ideas for country crafts made of plastic pipes that we found on the Internet. Get inspired, dare, and may technical progress help us!

Polypropylene pipes are made from polymers, that is, one of the varieties of plastics. Although the material is lightweight, it has a margin of safety. If pipes are used to transport hot liquids, then their service life is on average 50 years. When working with cold filling, the service life increases to 100 years. Polypropylene pipes are used in water supply, sewerage, watering and irrigation, heating, and even for transporting combustible gases, to which the plastic is chemically resistant. Polypropylene pipes are widely used for various types of laying: external, along walls, internal. However, this material can be used not only for its intended purpose. The range of application has increased significantly, due to creative crafts made from polypropylene pipes, which are now full of sites of jacks of all trades. Let's talk about what products for home and garden can be made from this durable, but relatively inexpensive material.

Advantages and properties of pipes

Polypropylene has the lowest density of all plastics. However, this property cannot be attributed to disadvantages, since its indicators are sufficient for working with liquids and gases. The material is characterized by low moisture absorption and the ability to work in extreme conditions (both at low and at high temperatures). Polypropylene has a low rate of flexibility, again compared to other plastics. The material is characterized by high resistance to cracking, but only at constant temperatures. If sharp drops are observed, then the probability of damage to the polypropylene pipe increases dramatically.

The material has electrical insulation and resistance to a whole list of chemically active substances. Only some reagents are able to destroy polypropylene, but only under certain conditions (temperature, humidity), which are difficult to recreate. This type of plastic boasts a long service life, as mentioned above. However, when the maximum allowable operating temperature is exceeded, the material begins to melt and ceases to withstand pressure. In this situation, the service life is rapidly reduced. Just one temperature jump is enough. Of course, this rule is more suitable for pipelines. It is unlikely that crafts will be placed in an extreme environment and subjected to such tests.

Among other things, if you buy polypropylene from a reliable manufacturer, you can guarantee its environmental friendliness. Crafts made from this type of plastic are not subject to corrosion, which has become a real scourge for metals, and are perfect for both home decoration and decorating the site. Due to the low weight of the pipes, the product is easy to move, and using the type of fastening with bolts, it is just as easy to dismantle and reassemble it in a different form.

Polypropylene during general cleaning can be washed with ordinary soapy water. The rest of the time it is enough to wipe it with a damp cloth once a week, like any other surface.

Pipe connection methods

Connect pieces of pipes made of polypropylene using diffusion welding. Although there are a lot of methods for fastening two parts, the rest are not able to provide a reliable connection:

Compression joint. The pipe is compressed, which over time will necessarily lead to deformation and leakage.
Thread. The weak side of the technique when using polypropylene pipes is the mechanical strength of the connection.
Press connection. It is sometimes used for polypropylene pipes, but the rubber seal can change its position, which will lead to a leak in the connection. Here we are talking about external loads on the pipeline.

The only reliable option is heating polypropylene to a certain temperature by welding, followed by cooling and "sealing" the joint. Of course, this method is applicable to pipelines that are used to transport gases, chemically aggressive substances or water of different temperatures. In our case, we are talking about crafts. Pipes are not used for their intended purpose, so you can, as an exception, use any other technique or use glue and even bolts.
In the pipeline, as a rule, each fragment is fastened tightly, that is, without counting on subsequent disassembly. For connection, fittings are used - special parts that are used in the assembly of the pipeline and provide a hermetic fixation of two fragments of the system. For polypropylene pipes, the same fittings are suitable as for metal products. They are made of various materials (brass, bronze, cast iron, brass, steel, polyvinyl chloride, polypropylene). Depending on the form and purpose, fittings are classified into the following groups:

Caps and plugs. Used to plug the end of a "blind" pipe.
Fittings. Connect pipes with flexible bends (hoses).
Crosses and tees (collectors). As the name implies, they are used to branch one pipe into several streams.
Adapters. Allow to connect pipes of different diameters.
Leads and corners. They are used for "turns" and changing the angle of inclination of the pipe.
Couplings and barrels. Extend pipes in a straight line. This type of fitting is the most commonly used. They allow you to locally replace a piece of pipeline without affecting the entire system.

Depending on the complexity of the craft, one or another set of fittings will be required. The shape of the future product must be thought out in advance in order to purchase suitable connecting parts.

For home/apartment

The range of products made of polypropylene pipes for the home is very extensive. From the material you can make both compact organizers for the desktop or shelves, coasters, as well as large-sized pieces of furniture. The material can be selected by color or you can paint the craft in your favorite shade after manufacturing. Polypropylene pipes, the surface of which is decorated with decorative painting, will look stylish and unusual. To cover the material with patterns or ornaments, you can use special stencils. From the variety of paints, it is better to choose resistant to moisture, for example, acrylic is suitable. Consider a series of master classes on creating simple, but necessary things in the house from polypropylene pipes with your own hands.

Organizer

Organizers were originally called notebooks for important daily records. Now this word has acquired several new meanings. We are interested in a desktop or wall fixture for distributing writing utensils, that is, a product in which pens, scissors, paper clips, paper clips, sharpeners, buttons and other little things necessary for work can be laid out in sections. Organizers are widely used not only in offices, but also in home workshops. For example, doing needlework is also associated with the use of a large number of small tools and parts that it is desirable to lay out in their places. There are two types of organizers:

Desktop.
Wall.

The former are used if there is enough space on the table to place them. The latter are suitable for distributing a large number of small items. For the manufacture of the organizer, only the tubes themselves, fasteners for connecting them into a single structure and any dense material from which the bottom of each section is made will be required. You can use plastic trim. The tubes are cut into fragments of the desired length. Then they are connected to each other on the sides and the bottom is glued to the structure. If the organizer will be attached to the wall, then the upper edges of the pipes are usually cut at an angle for ease of use. Instead of the bottom, in this case, a board or a piece of plywood is used.

Some make an organizer for wires from a pipe. Holes are drilled in it through which they will go into the room. All the "disgrace" from the ball of wires is hidden inside the pipe, thereby not affecting the aesthetics of the interior of the room.

Decorative frame or partition

Decorative frames and partitions made of polypropylene pipes are made according to the same principle. For work you will need:

Adhesive composition.
The tubes themselves.

They need to be cut into numerous "rings". You can also use a regular knife, since polypropylene is a rather soft material, but it is better to purchase special scissors specifically for plastic. Other devices can disfigure the edges of the pipe with notches. After the required number of rings is ready, they are connected by the sides with glue to each other. Fragments of different diameters will look original. In this case, the illusion of soap bubbles in 2D is created. From the rings form a frame for a photo or a partition in the room. By the way, such a screen will compete with designer products. It looks fresh, original, airy and incredibly aesthetically pleasing. To complement the element of zoning the space of the room, you can use decorative lighting, which will be in harmony with the white product.

shoe shelf

Shoe shelves made of polypropylene pipes, as a rule, are made in the form of a honeycomb. The material is cut into fragments of the same length. Then they are connected to each other with glue. The shelf is formed from rows of scraps, where each subsequent fragment "lies" on the gap between the two previous ones located below. The form of such a shelf can be given the most diverse. One of its main advantages is the versatility of the configuration. By adding or removing tube sections, you can choose the perfect shape for the hallway, in which the furniture is already located, and where it is difficult to put a full-fledged shelf. Some craftsmen combine the shoe storage system with cabinets or hangers so that the design blends seamlessly into the overall composition. For such shelves, only pipes of large diameter are suitable.

Before starting work, you need to try on. It is enough to put a pair of slippers or boots into the hollow part of the pipe. You can also make a shoe rack using boards as crossbars. The tubes in this case will become lateral supports. They can be styled retro and painted with silver paint, and the surface of the fittings can be covered with a bronze compound.

Wine bottle holder and glass holder

A stand for wine bottles from polypropylene pipes can be made, like a shoe shelf in the form of "honeycombs", but using fragments of a smaller diameter. They are also selected individually, trying on bottles. For the “tree” design, tubes of small diameter are suitable. A complex composition is assembled from them with a central "trunk" and side branch branches. At the end of each, a coupling fitting is fixed, with a diameter suitable for the neck of the bottle. The glass containers are then inserted into these holders. Wine "tree" can be decorated in steampunk, retro, eco style. For minimalism, you can use one piece of pipe, in which holes are cut out for the necks on the side. The fragment is fixed with self-tapping screws on the wall (it can be tilted) and bottles are also inserted into it with their necks down.

To make a hanging or wall-mounted glass holder, one piece of pipe is also enough. Along the entire length, an incision is made on it as wide as the diameter of the stem of the glass. Then the product is fixed on the wall or bar counter. Glasses are threaded with legs through an incision. The wide bottom will not allow the glass container to fall. On such a rack it is convenient not only to store glasses, but also to dry them after washing.

Vases and flower pots

Pots for large indoor plants can be made from large diameter polypropylene pipes. For the bottom, it is better to use a denser type of plastic. For small green spaces, small-diameter tubes are suitable, which are grouped into a single composition. From above they are cut at an angle, then painted green. It turns out a design that vaguely resembles bamboo thickets. A pot for ornamental grass, cereals or seedlings is made from pipes and plugs. Fragments are arranged horizontally. In each, a piece is cut out in the middle or along the entire length, leaving only small “walls” on the sides. Then, a plug is attached to the pipe trim, soil is poured and plants are planted. Such pots, as a rule, are fixed on the walls. So they save space and do not interfere.

Nursery furniture and more

As mentioned above, full-fledged furniture can be made from polypropylene pipes. If it is properly decorated, then such an item will not look like a homemade garden product that accidentally ended up in the house. The list of pieces of furniture that can be made from pipes is quite impressive:

Tables and coffee tables.
Chairs and armchairs.
Racks, shelves and cabinets for household items, shoes and clothes.
Hangers and dryers.
Children's beds (including bunk beds) and playpens for babies.

Shelves and stands

Consider the process of manufacturing storage systems using the example of a bookshelf. For such furniture, you can only get by with pipes, or additionally use boards or cut pieces of MDF, chipboard. In this case, the content that will be placed on the shelf matters. Books, for example, can be freely laid out on an “empty” shelf without a crossbar if its width is less than the width of the publication. And the filling will not fall. By the same principle, you can make shelves and holders for shoes, magazines, dishes, caps, bottles, cups, cutting boards, magazines, CDs. This option is not suitable for those shelves on which filling of different shapes and sizes will be placed. Here you will already have to use crossbars from another material, which will be fixed on the "sides" of the tubes. Corner shelves for books will look stylish and unusual. For their manufacture, pipes, plugs, bends and corners are required. The holder is assembled from fragments, placing them in U-shaped zigzags. When the shelf is ready and fixed, the books will stay on it by relying on the pipe itself and the wall. The shelf is ideal for loft-style interiors.

To make a coffee table, you will need small diameter tubes, fittings and a countertop. The glass cover will look stylish. The tube system will play the role of a support. They can be connected to each other according to the standard scheme, like four legs, or you can connect your imagination and decorate the supporting part of the table with intricate tubes decorated with various fittings.

Clothes hanger and dryer

Assembling a hanger or clothes dryer starts from the base. You will need four tubes for the legs. They are connected to each other with tee fittings. A crossbar tube is inserted into the side branch, which will increase the stability of the product, and two racks into the top branch. Plugs are put on the legs so that dust and dirt do not get inside. Additionally, the side racks can also be fixed at the top with another crossbar, again using a tee fitting. "Hooks" are made from the same parts. The top bar is completely assembled from T-fittings with caps.

Rack for living room, hallway, pantry

In the racks of polypropylene pipes, a base structure is made, which is subsequently supplemented with wooden shelves. As a result, the furniture will turn out to be not bulky, relatively light, but at the same time durable and resistant to heavy weight loads. Since the material is insensitive to aggressive microclimates, it is versatile. Such racks can be used in the kitchen, bathroom, living room, hallway, nursery and pantry with pickles. Since the loads on the furniture will be quite large, polypropylene pipes cannot be interconnected using bolts or adhesives. In this case, it is better to resort to diffusion welding, which will ensure a reliable connection of the fragments.

Arena for children

The playpen for babies is necessary if the mother plans to do household chores when the child is at hand. This design will protect the little person, but it will not limit his movements. Manege is easy to make from polypropylene tubes. For work you will need:

Fittings-tees and eight corners.
Tubes of small diameter.
Scissors for cutting polypropylene.

Manege is assembled very simply:

First, the tubes are cut into fragments of the desired length (small horizontal and long vertical "rods").
Then, T-shaped fittings are put on each twig on both sides.
On the sides, short tubes are inserted into the connecting parts, two on each side.
Now they are again put on T-shaped fittings, which are connected below and above with the next twig.

Then the wall of twigs is “wrapped” 90 degrees with the help of corners.

The bunk bed is assembled entirely from tubes and fittings. The bed itself, where the mattress will lie, is reinforced with short tubes, which are often placed from side to side. It is easy to make a neat ladder from the material. If the bed is for boys, then even a small horizontal bar for exercise in the morning can be attached to it. For one child, a workplace is being arranged from below. To do this, it is enough to assemble additional supports under the countertop from the tubes. If the baby is still quite a crumb, then the bed is decorated with high sides.

For country house and garden

Plastic is a universal material, products from which can decorate not only the house, but also the territory adjacent to it. For the improvement of the garden plot, light, mobile furniture, special stands for flowers and plants, greenhouses, pet feeders, greenhouses, pots for seedlings are needed. In the play and recreation area, it is also necessary to put a couple of special structures: football goals, gazebos, pergolas and decorative arches. For outdoor enthusiasts, you will need a separate place for parking bicycles. An excellent replacement for a full-fledged garage, for the construction of which there is no time or money, will be a summer carport that will protect the car from rain. All this can be done from one material - polypropylene tubes. About how exactly, and we'll talk further.

For the manufacture of football goals, you will need tubes, mesh, fittings (corners, plugs, tees). Start work from the ground up. It will be U-shaped. First, the widest crossbar is assembled from three short fragments. They are fixed with T-shaped parts. Then three fragments of the tube (two short sides and a wide middle) are interconnected using corners. The same fittings are put on the ends of the "P", but with branches pointing upwards. Now they make exactly the same design. It is connected to its "twin" through the branches of the corners, which were directed upwards, and with the help of two crossbars inserted into the T-shaped fittings. Finish the job by stretching the mesh.

Garden furniture made of plastic pipes

Chairs, deck chairs, tables, benches, deck chairs are made from polypropylene tubes. It is better to choose a white material that can be easily combined with wood, metal and textiles of any shades. In addition, a neutral tone will make the furniture airy and give a touch of freshness. Sun loungers, deck chairs, chairs can be made according to two principles:

Strengthen the seating area with frequently spaced cross tubes.
Use a stretch fabric that will allow the seat to sag slightly.

In the first case, you will have to use special mattresses or linings to sit softer. Products in which polypropylene is combined with wood look great. Tables and low tables are assembled using the same technology as similar home furniture. The only difference is in the material for the countertop. If a coffee table with a glass cover in the house looks appropriate, then for the street it is better to use more durable and less easily soiled materials (plastic, wood, metal).

garden arch

Polypropylene tubes have sufficient plasticity so that a semicircular arch can be formed from them. The simplest example of the product consists of two rows of supports that flow smoothly into the top crossbar, connected to each other by horizontal trimmings using T-shaped fittings. In order for the arch to cover most of the garden path, additional rows of supports are attached to it, as if stretching the structure along. The arch will be a great support for weaving roses, grapes, clematis, ivy and hops. Two years is enough for the branches to densely cover the tube structure, leaving only small gaps for sunlight. For more complex designs, tubes of various lengths are used. Their intersections and connections adorn the walls of the arch.

For a gazebo, a frame base is made from polypropylene pipes. Designs can be given a simple square or classic round shape. The roof is covered with polycarbonate, waterproof fabric or thin wooden slats. For a patio, a roof is not needed, but on the sides of the “wall” gazebos are created from fluttering curtains, which, if necessary, provide the necessary privacy. If the master has an impressive stock of polypropylene tubes and fittings (plugs, crosses, tees), then the side partitions can be made from them in the form of a frequent lattice (classic or at an angle of 90 degrees).

A carport is assembled according to the same principle as a gazebo. In simpler versions, the roof is stretched from waterproof material (as for tents) and this is limited. If there is time and money, then the parking space can be sheathed with polycarbonate sheets on top and sides. Thus, the car will be protected from rain and wind, which will even allow you to work on car repairs in bad weather.

Bicycle parking spaces

A small parking lot for bicycles is assembled from polypropylene tubes of small diameter. First you need to form a grid. Between its rods leave the gaps necessary to accommodate the bicycle wheel. A T-shaped fitting is fixed on each crossbar, with the help of which the stand-holder will be fixed in the future. It is assembled from short pieces of pipes and similar fittings. Subsequently, one end of short tubes is threaded into them, which are fixed to the “lattice” with the second ends. As a result, the two planes will intersect at right angles, and the whole structure will stand firmly on the ground.

Greenhouse - the most simplified design, covered with a film, which is designed for growing seedlings. They are used only in early spring, when the ambient temperature has not yet risen to the desired values, and growing weak shoots on the street without special barriers is too dangerous. Greenhouses are considered temporary structures. Unlike greenhouses, they do not have windows or doors. To build a small greenhouse, a set of tubes for the base, for semi-circular bars, T-shaped fittings and corners is enough. The structure is assembled from several “arches”, on which a transparent film will subsequently be fixed with the help of special plastic clothespins-clamps. You can get into the greenhouse only by removing the protective sheet.

Greenhouse and greenhouse made of plastic pipes

A greenhouse made of polypropylene tubes is a more “serious” and bulky structure than a primitive greenhouse. As a rule, special soil is brought into it, high beds are equipped, the walls are equipped with windows that open when ventilation is necessary, and a full-fledged door is provided that closes with a latch. Since the structure is more monumental, it is usually covered not with a thin film, but with polycarbonate sheets, which are fixed on a “skeleton” made of polypropylene tubes. The shape of the greenhouse can be both classic semicircular and square, rectangular. Assemble the structure according to the principle of assembling arbors. Inside, it is usually equipped with special shelves made of the same tubes, which will later play the role of stands for long pots with seedlings and further strengthen the structure.

Some craftsmen make complex structures in which static segments alternate with mobile ones. The latter are equipped with special handles and rise up to ventilate the greenhouse. The need for windows for such a structure is eliminated.

seedling containers

To make containers for seedlings, you will need pipe trimmings, plugs and plastic scissors. First, two longitudinal and two transverse incisions are made in each fragment. The resulting rectangle of polypropylene is removed from the tube. The sides of the fragment are closed with plugs. The pipe is placed horizontally. Fill it with soil and plant plants. For such pots, a “step-ladder-stand” is made. Its "steps" are interconnected by additional crossbars, on which tubes with seedlings are placed in a row.

Feeder for chickens

Tube chicken feeders can be built in two ways:

Make a simple horizontal structure with several sections, like pots with seedlings.
Make a vertical feeder from several pipes. It takes up less space but stores a lot of food.

The second structure is fixed on the wall with brackets at such a height that the chickens freely reach the grain. From above, the feeder is equipped with a lid that will protect feed supplies from dust and moisture. The height of the pipe is selected individually according to the height of the person who will fill the grain (approximately at the level of his chest).

You can make an unusual wall Christmas tree out of polypropylene pipes if you don’t have an artificial beauty team at hand, and the chimes are about to strike midnight. They collect a tree from the "rings" into which the tubes are cut. They are connected to each other, giving the shape of a Christmas tree. It is better to use tubes of different diameters. Each ring is painted in a certain shade. To add a festive touch to the craft, it is additionally covered with glitter. Each "ring" is invested with a New Year's toy. Some can include miniature gifts. By the way, in this way it is easy to “hide” presents from children, and turn their search into an exciting game. A New Year's wreath on the front door is also collected from "rings". To make the decoration catch the eye of passers-by and guests, it is decorated according to the principle of contrasts. For example, only white rings are used, in which bright Christmas balls and toys are selectively placed within one or two shades.

Game complex for cats

The play complex for cats is assembled from tubes and plastic crossbars. After the construction is made, each detail is covered with a dense fabric or a rigid cord, which will subsequently be used as a scratching post. The complexity of the design depends on the patience of the owners and the activity of the pet. You can build a simple house with a horizontal ladder, a sunbed and hanging toys. Some do not stop there and assemble real cat palaces with “hammocks”, a complex transition system, “booths” and running wheels, like hamsters in cages.

As it has already become clear, polypropylene pipes have so many applications that it is even difficult to squeeze their list into the framework of one article. This material is somewhat reminiscent of a designer: the master has a set of parts that can be fastened with the help of connecting elements, as your heart desires. Therefore, it is easy to obtain from pipes both a simple construction, the laconism of which borders on primitivism, and a complex composition with ornate weaves of individual fragments.

Plastic pipes are successfully used in the installation of plumbing, sewerage, heating systems. They are usually bought in specialized stores. The cost and ease of processing made such materials popular. For construction or repair work, they are taken with some margin, and after completion, unnecessary pieces remain. So what can be made from these scraps of plastic pipes?

Material and its qualities

PVC pipes and the remaining mounting elements will be successful crafts. A zealous owner will not throw them away, clutter up a balcony or cottage with them. After the plumbing is done, the skill of processing and docking will appear. Why not use it in creating useful things, improving living space. Fantasy, skillful hands and ideas in our photo tube crafts will inspire you to create unusual items.

The main advantages of pipe materials:

price, PVC pipes are inexpensive, and you have already paid for trimming, you may have to buy connecting elements;
environmental safety, plastic water pipes are completely neutral, do not corrode;
the strength and light weight of the structures are ensured, which is undoubtedly convenient;
appearance, white plastic looks good in any modern interiors;
service life - manufacturers confirm the half-century life of pipes;
ease of assembly and disassembly, if necessary, repair of structural parts.

Processing Features

The manufacture of any crafts requires accurate measurements and accurate cuts. This is mentioned in every pipe craft master class. Three rules for working with plastic must be observed:

Measure the length of the segment with a tape measure, be sure to mark with a marker.
Cut the marked area with a knife.
Fix the pipe before cutting it with a hacksaw or pipe cutter.

Connections are made easier if the pipes are cut at right angles. Fasteners that are sold in hardware stores are designed for such an angle.

Cut and clean the cuts so that there are no nicks and chips.

Pipes can be bent. To do this, they are heated with a building hair dryer or, with caution, with a gas burner. The heated pipe is bent according to the template, fixed and left to solidify in this form.

How and what to connect

PVC pipes have become popular due to the ease of installation and assembly work. To connect them, you need corners, couplings, crosses. They are fastened either by hot soldering using an “iron” or simply with glue and self-tapping screws.

If the design does not require tightness, then soldering the pipes is not necessary, and without it it is also easy to disassemble the structure. This technique is used when creating greenhouses, when they are mounted for the spring-summer period, and then disassembled for the winter and stored in this form.

Crafts from plastic pipes

Products made of PVC pipes according to the assembly methods are divided into two types:

collapsible, this is a kind of constructor that is assembled and disassembled many times;
not collapsible, they are assembled once.

In the first case, such structures are assembled for the season or if necessary. Interesting crafts from pipes for summer cottages - greenhouses, gazebos, pools, or folding chairs and tables for hiking in nature are examples of collapsible crafts. Lightweight, durable and useful products are easy to assemble and disassemble.

In non-collapsible crafts, pipes are fastened with glue or screws. Short cuts are easily connected into simple bookshelves, coasters. Try your hand at assembling elementary structures, look at the result and be inspired by it to create products in a minimalist style with original ideas for pipe crafts.

Armchairs, chairs will update the interior of the apartment. And if you have basic knowledge in the field of electrical engineering, then you can assemble unique lamps - a wall lamp, a table lamp, a chandelier or a floor lamp.

Very short remnants up to 10 cm long are well suited for designer organizers. They will find their place for tools on the wall of the workshop, stationery on the desk, even cosmetics in the bathroom.

Assembly example

Let's show how to make crafts from pipes with your own hands using the example of a mobile clothes dryer. The simplest form resembles a folding easel. The dryer is made from two rectangles of the same height but different widths. The inner rectangle is already made by 10-12 cm. The widest place of the dryer was 80 cm, but you can do it at your discretion.

For its manufacture you will need:

all pieces of pipe with a diameter of 25 mm, legs 60 cm long 4 pcs, 20 cm 12 pcs, crossbars of the base 80 cm 4 pcs, crossbars of the inner rectangle 70 cm 3 pcs;
connecting corners 2 pieces;
tees 12 pcs;
clamps 2 pcs.

The procedure for assembling the structure

We make dryer racks from segments 20 cm long. To do this, we vertically connect 3 such pieces with tees. We get racks a little higher than 60 cm. Insert the legs from below, we get 4 racks 120 cm high. We connect two racks with a wide crossbar using corners.

We insert the crossbars into the free horizontal holes of the corners, we get the main and inner rectangle. With clamps we fasten the inner narrow rectangle to the upper crossbar of the base.

The dryer is installed as the letter “L”, for stability, you can adjust the angle of the rectangles. Laundry is hung on the crossbars, you can put the dryer in any convenient place. The assembled structure is easily hung on the wall in the pantry.

Important: Similar step-by-step instructions showing how to make pipe crafts are easy to find on the Internet. The use of leftover plastic pipes is not limited to the ideas presented, this material can really be used in your own home workshop.