How to build a beautiful fence from corrugated board. Do-it-yourself fence from a profiled sheet: a step-by-step photo report. Calculation of transverse logs

We will send the material to you by e-mail

P roflist is an easy-to-work and relatively inexpensive material. It is great for both roofing and fencing. How to build a fence from a professional sheet with your own hands? Photos, expert recommendations and step-by-step instructions will help you install a durable and beautiful fence on the site.

The fence from the profile will reliably hide the site from uninvited guests and prying eyes

Metal profile is one of the most inexpensive universal building materials. It is suitable for roofing, construction of fences, gazebos and on the site.

• a large selection of patterns and colors;
• ease of transportation and installation;
• resistance to moisture and frost;
• fire resistance;
• durability.

Among the shortcomings it is worth noting:

• not the cheapest material;
• if repair (painting, straightening) is necessary, it loses its ideal appearance;
• has a large windage, in places with strong winds it crumples and breaks off the base.

It is worth recognizing that the advantages of a profiled sheet for the construction of fences are obvious, and a few disadvantages can be compensated for by careful care and reliable fixation of the material.

Profiled sheet for the fence: sizes, prices, brands

The metal profile for the construction of the fence must not only hide the site from prying eyes, but also be strong enough to withstand wind and rain, accidental mechanical damage.

Standard dimensions of profiled sheet for fences and their marking

The metal profile has three standard markings:

After the letter in the marking of the sheet there are numbers. They indicate the height of the ridge. For example, brand C35 means that the wave height on this profile is 35 millimeters. The length of corrugated board varies from half a meter to fourteen meters. The standard length is 2 meters.

brand	Full width, mm	Working width, mm	Comb height, mm	Material thickness, mm	Pitch m/d combs, mm
C8	1200	1150	8	0.4-0.8	62.5
C10	1155	1100	10	0.4-0.8	45
C20	1150	1100	20	0.45-0.7	137.5
C21	1051	1000	21	0.4-0.7	65
HC35	1600	1000	35	0.5-0.9	70

Useful information! For sheets of corrugated board, one edge of the wave is slightly smaller than the other. This should be taken into account when joining the material. A large wave is superimposed on top of a smaller one.

Professional sheet for the fence: product price

Profile view	brand	average price r/m2
Galvanized 0.35 mm	C8	170
	C10	199
	C20	206
	C15	212
	HC35	238
Polyester coating 0.35 mm 25 µm	C8	224
	C20	234
	HC35	270
	C15	270
	C10	276
Galvanized 0.4 mm	C8	199
	C20	207
	C10	216
	HC35	225
	C15	228
Polyester coating 0.4 mm 025 µm	C8	260
	C20	272
	C10	279
	K25	281
	C15	290
	HC35	299
Polyester double-sided 0.4 mm 025 microns	C8	298
	C20	311
	C21	340

Profiled sheet fences: photo options

Metal profile fences, with all their undoubted advantages (reliability, durability, low cost), are still inferior to many other options for fences in aesthetics. It is worth recognizing that a dull row of a monophonic profiled sheet does not decorate the site. Craftsmen offer numerous options for making a fence from a profiled sheet with their own hands. Photos of design options inspire ideas and experiments on your own site.

The combination of different building materials with corrugated board gives numerous variations of fences. For combinations, you can use stone and brick, forging, picket fence and other materials. When planning construction, the facade of the house should also be taken into account. If you skillfully combine colors and elements, the fence will become part of the ensemble.

The classic option is considered to be a fence made of stone or brick pillars and sheets of corrugated board. A solid foundation must be provided for each pillar. The supports are connected by a plinth reinforced with a metal bar. The secret of the attractive appearance of such a fence is in the skillful selection of colors. Brown and green profile colors are best combined with brickwork, shades of gray with stone.

One of the simple finishing options is the design of the edge with a edging bar. This bar is able to protect the edge of the sheet from moisture and give each individual section additional rigidity. Such fence elements can be combined with other materials.

A novelty on the modern market is a sheet with offset printing. Images on such material can be very different, from, to panoramic photos of nature.

The curly edge gives originality to the usual corrugated board. Such material for fencing began to be sold quite recently. The edge is treated with a coating against corrosion and confidently retains its integrity.

An excellent combined option is a fence using a metal picket fence. It is durable and looks quite attractive. The color of the picket fence can be chosen in accordance with the main scale of the fence. Such a fence will harmoniously fit into any landscape.

Forged metal elements will give a sophisticated look to the fence. They can be ordered individually or purchased ready-made fragments. If you place them not only on the fence, but also on the facade of the house, you can achieve the unity of the ensemble.

Another way to decorate corrugated board is to use plasma cutting for metal. This high technology makes it possible to create openwork ornaments of any complexity according to computer sketches. The fences from the profiled sheet, the photo of which is given below, are made using this technology.

A simple and attractive way to decorate is landscaping. Ornamental shrubs can be planted along the fence, trellises for loaches can be placed.

Related article:

How to build a fence from a profiled sheet with your own hands: a sequence of actions

Most owners of suburban areas set themselves the task: how to build a fence from a profiled sheet with your own hands? In fact, this is possible, especially when the home master has at least one assistant.

Tools:

Approximate calculation of materials for 10 meters of fence:

• Profile sheets (width 118 cm) - 9 pcs;
• Pipes for racks 270 cm length - 5 pcs;
• Transverse logs - a square metal profile 20X20 - 30 meters;
• A bag of cement, gravel.
• Self-tapping screws for metal - about 10 pieces per square meter.

DIY fence installation steps:

Stage 1 - design

At first glance, it seems that building a fence is a task that does not require a particularly careful approach. But the economical consumption of material and the strength of the future structure depend on how carefully the measurements are made and the project is prepared. That is why it is important to draw up a fence project. After surveying the territory with a tape measure, you can sit down in the old fashioned way with a pencil and a ruler over graph paper or use modern computer technology. When designing, it is important to take into account uneven terrain and soil features.

Stage 2 - installation of supports

In the marked places, holes are drilled to a depth of a meter with a drill. They are equipped with pillars-supports, pre-treated with a composition against corrosion. It is important to use the building level to align the supports strictly vertically, otherwise the fence will be skewed. Small stones or rubble are poured into the free space of the pits and poured with concrete. After that, you need to wait at least three days for the solution to completely harden.

Stage 3 - transverse lags

If the fence is low, two transverse rows of fasteners are enough. But for a fence from 1.8 meters, it is better to install an additional third row. The transverse logs are fixed on the poles by welding. Welding areas are additionally stained.

Stage 4 - fastening sheets

The metal profile is fixed on the crossbars with self-tapping screws. It is better to use roofing screws, their kit includes sealing gaskets that do not allow moisture to pass through. It is important to remember that the edges of the profile are slightly different in wave size and you need to connect them correctly. Some prefer to fasten self-tapping screws in each wave.

• When working with a metal profile, you need to protect your legs with strong shoes and use wooden stands so that the edge of the sheet does not deform.

• The profiled sheet is not fastened with nails, such a structure will be torn off from the supports at the first strong wind.
• When working with a profile, gas welding equipment is not used.

• Professionals do not recommend cutting the sheet with a grinder - it removes the protective layer, and the edge of the sheet will quickly rust.
• A couple of months after installation, you need to slightly tighten the screws.

It is quite possible to build a fence from a professional sheet with your own hands. It is important to choose the right material for rigidity and size, taking into account the characteristics of the terrain. For greater attractiveness, it is recommended to combine the metal profile with other building materials. If you take care of such a fence and treat minor damage in a timely manner, it will last for decades.

Video: do-it-yourself fence installation

Save Time: Featured Articles Every Week by Mail

There are many ways to independently design a fence or a fence for a summer cottage from corrugated board. Any of the structures you choose should be reliable, practical and organically combined with the existing design.

A profile sheet is an excellent solution for mounting a fence, especially considering that the fence is the hallmark of every private house. Another plus of such a fence is the economy in the arrangement.

Installation of a corrugated fence is a popular and affordable option for highlighting the boundaries of a private territory, protecting it from illegal intrusion and prying eyes. Structures made of such material are distinguished by reliability, presentable appearance, ease of installation, ease of installation and long service life.

When building fences, corrugated board can be combined with other materials: wood, stone, concrete, brick. Such combined fences make patios more comfortable. An example of a combined fence option is in the photo below:

In settlements, such structures are found in large numbers, high quality makes this material popular, it is often used for landscaping home gardens. But before you start installing a corrugated fence, you need to study in detail the advantages and possible disadvantages of such fences.

Main advantages

Fences made of profiled sheet have a lot of advantages.

Work related to the installation of fences, for the construction of which modern material is used - profiled sheet, takes a little time. Such structures are able to withstand powerful wind gusts. Profiled sheet fences can be used not only for protective purposes, but also for decorative ones.

Among other advantages, one can single out the protection of the backyard territory from noise, prying eyes and intrusion on the estate.
The profiled sheet is a fairly strong material, but even if it is damaged as a result of mechanical stress, the unusable section can be replaced quickly and without much effort.

The corrugated board has a stylish appearance and a variety of colors: options are available in white, yellow, green, blue, brown, black. The list of its advantages also includes a long service life and a budget price.

Flaws

1. The material needs special care.
2. Using a profiled sheet, it is unrealistic to design wrought iron fences with elegant details.
3. The quick installation of protective structures from corrugated board implies the presence of specific skills and theoretical knowledge.

With this, the disadvantages of the fences from the profiled sheet are exhausted.

Having studied the pros and cons of the material, we can conclude: it has excellent operating parameters. We will find out what are the features of corrugated board, how it is produced.

Production technique. Varieties

For the production of profiled sheets, galvanized steel is used. With the help of special equipment, the sheets are given a ladder (corrugated) configuration, and for this purpose the cold stamping method is used.

Due to this method, the material acquires transverse rigidity, due to this, its bearing capacity increases. Accordingly, sheets can be laid and mounted in two directions - horizontal and vertical.

After rolling through the machine mechanisms, steel sheets on one side and the other are treated with polymer composition agents that protect the material from corrosion. Polymer coating is an obligatory component of profiled sheets used for the construction of fences and roofs. Thus, the material is protected from rust and sunlight.

The parameters of profiled sheets for fences and other structures (we are talking about length) are dictated by the wishes of customers. The production of material of different lengths becomes possible due to the fact that steel in rolls is used for its production. But the width parameter is limited to the range of 980-1850 mm.

The use of profiled sheets for the installation of fences makes it possible to give the facades of houses a more aesthetic appearance.

Important! Since corrugated board belongs to the category of materials intended for outdoor use, it does not change its initial parameters under the influence of ultraviolet rays, precipitation and temperature changes.

Profile types:

• for roofing or bearing;
• universal purpose;
• wall.

For the construction of fences, a wall type of corrugated board is used, less often - universal.

To understand how to build a fence from corrugated board with your own hands, you need to decide on the material.

For the installation of fences, a wall type of profiled sheet is mainly used. Such structures do not have to withstand the load of the fallen snow cover, so strict requirements are not imposed on them. Sheets with a small corrugation height (up to 21 mm), having a thickness of 0.5-0.7 mm, are the most successful solution for the construction of fences, gates and gates from corrugated board.

On a note! Fences constructed from this material muffle noise and create a kind of screen that reflects sounds.

The design of corrugated board fences can be very diverse. Planting ornamental plants along the fence or painting the fence with oil paints is a great idea.

As for the color scheme, there is a wide variety of colors to choose from. Innovative techniques make it possible to decorate the surface of the material with a variety of patterns. With the help of modern technologies, imitations of brickwork, natural wood and even stone are created.

Especially for the installation of fences, some types of profiled sheets are produced, which have a sharp edge on one side. This is the best solution for a hedge.

1. Carefully check the quality and thickness of the profiled sheet.
2. Examine the certificates provided by the manufacturer and make sure that all technical regulations and standards were observed during the manufacture of the material.
3. Do not forget that the quality of a cheap product always leaves much to be desired. Find a balance between the life of the material and its price.

Read about how to make and install, the stages of construction and installation, ideas and options for the design and decoration of graceful hedges.

How to make a fence from a welded mesh with your own hands? Instructions and recommendations are collected.

Features of the construction of concrete retaining walls and their use in landscape design are described in the article at:

Construction process

Consider how to put up a fence from corrugated board and where to start if you decide to build it yourself.
To understand how much it will cost to build a fence from profiled sheets, you need to find out the price of the material and the quantity, i.e. how much corrugated board is required to build a protective structure.

First of all, you need to decide what the height of the fence will be, take measurements of the infield. Having decided on the parameters of the width and length of the fence, having learned the cost of the material, you need to make a series of calculations with the data obtained, as a result, you will calculate the amount of building material needed to install the fence and the total costs.

There are two options for mounting a fence: with a base and without. Building a fence without a foundation takes much less time. But a structure with a foundation wins in terms of reliability and respectability.

Despite its many advantages, profiled sheet belongs to the category of simple materials. To give profiled sheet fences a more aesthetic appearance, brick, wooden and stone decorative elements in the form of pillars, columns or supports are used.

A corrugated fence is the best option for those who want to enclose their estate in a short time.

The professional flooring is in great demand. The fastening of profiled sheets is carried out on vertically located supports. Supports are designed from various materials - a metal profile pipe, concrete or brick.

Fences made of corrugated board with brickwork supports belong to the elite structures and have a respectable appearance. For such hedges, you need to install a base with a tape-type foundation.

It is really possible to cope with the erection of a fence from profiled sheets on your own, without the help of professionals, thereby saving on the improvement of the site.

If you decide to do this work yourself, we advise you to stop at the simplest option. For example, fencing made of corrugated board with supports made of metal pipes. Installation of such a fence is quite simple, its cost is low.

Preparation of tools and building materials

The main material is galvanized steel sheets with a double-sided treated curly surface, their number is calculated in advance. Today, many owners of suburban areas are happy to use corrugated board for mounting fences, because such structures are reliable and have a long service life.

The second important element of profiled sheet hedges, in addition to the sheets themselves, are the supports. As pillars, you can use profile pipes 60x60 mm or with a round section. The distance between adjacent pillars is 2.5 m. By measuring the perimeter of the backyard area, you can easily calculate the required number of supports. The height of the pillars should be identical to the dimensions of the future fence, plus 100-150 cm for deepening into the ground.

In the photo - an example of a high fence made of corrugated board: the height of the fence can be both 2.5 and 3 m:

• Fastening of profiled elements is carried out using metal profiles.
• In addition, you will need metal screws, a building level and a welding machine.
• Dishes for solution.
• Mortar materials (cement, crushed stone, sand).

Installation stages

With the help of a garden drill, holes are dug under the pillars, about 100-150 cm deep.

Supports are vertically installed in the prepared pits, which are then cemented. The quality of the installation of pillars directly affects the reliability and durability of the fence. The pillars are mounted strictly in a vertical position, the evenness is checked with a level.

The placed pillars are poured with a concrete-based solution, the mixture must be bayoneted after pouring. Air bubbles should come out of the mixture to the outside. After this, work is suspended for three days so that the foundation hardens.

The next step is the installation of transversely located logs. They are placed parallel to one another, the extreme logs should be at a distance of 20 cm from the soil and the top of the post. The log is fastened to the supports by a welding machine. If there is no welding machine, bolts with nuts are used for fastening.

Profiled sheets must be attached to a reliable frame base. Fastening starts from the gate. The vertical position of each element is checked using a level. The sheets are superimposed on each other in one wave and fixed on the logs with self-tapping screws.

Important! The fastening of the sheets must be reliable, the strength and operational life of the structure depend on this.

Useful extras

After installation, metal structural parts are primed and then painted, thus extending their service life. The upper part of the profiled sheets can be decorated with decorative elements.

After completion of the installation work, the iron structures must be protected against rust before painting.

On a note! A profiled sheet fence can be decorated with graffiti-type patterns - this decor looks very stylish and modern.

Subtleties of care

With proper use and proper care, profiled sheet fencing will justify the financial investment and will serve for many years.

To maintain the fence in optimal condition, special efforts are not required. The most important thing is to periodically remove pollution from the hedge. There is nothing difficult in this, structures made of corrugated board are undemanding in maintenance and are resistant to the negative effects of natural factors.

More and more land owners prefer such fences, because. such designs have many positive characteristics that made them popular and in demand. Fences made of profiled sheets are suitable even for elite households.

Video

Watch a video teaching step-by-step self-assembly and installation of fences from corrugated board in the country:

Photo gallery

Beautiful fences made of corrugated board, see the options for their design and execution in the photo gallery:

Every homeowner strives to enclose his site from prying eyes and thieving hands, and more and more often a profiled metal sheet is chosen as the main material for the fence.

Among the people, it is better known as a professional sheet or corrugated board and is distinguished by its affordable cost and ease of operation - any owner can build a fence out of it.

Why professional sheet?

The corrugated board is a steel profiled sheet with a zinc or aluminum-zinc anti-corrosion coating. The type of the rolled profile and the thickness of the original sheet determine its functionality and purpose.

So, for the construction of a fence, the most optimal, durable and inexpensive profiled sheets of the “C” or “MP” series are most often chosen.

Profiled sheet fencing, along with cost-effectiveness, has several advantages:

• High installation speed;
• The coating is continuous, without cracks or holes;
• Any height of the fence;
• The presence of a sharp protective edge;
• Durability;
• Aesthetic appearance, large selection of colors and textures;
• Light sanitation;
• Muting street noise.

Materials and tools

The main advantage of a corrugated fence is the limited number of necessary tools and materials, which allows you to install it on your own, without involving a construction team or hiring special equipment.

So, wall or universal corrugated board with a wave height of 18 to 21 mm will become the optimal material for future fencing.

For aesthetics and long service life of the fence, you should choose a coating in advance: economical polyester, matte polyester resistant to local damage or the most durable pural, plastisol or polyvinyl fluoride.

The frame for corrugated board is made of metal pipes, preferably a rectangular profile with a cross section of 60x60 mm and a wall thickness of 3-5 mm. It is recommended to use jumpers-lags for the strength of the structure.

You will also need a concrete solution, sand and gravel backfill, and among the tools: mortar shovel, tape measure, welding machine, building level, cord or rope, self-tapping screws, drill, grinder and screwdriver.

We measure and calculate

First of all, the perimeter of the site is measured, the necessary calculations are made and all the required materials are prepared. The number of profiled sheets is calculated by dividing the perimeter of the fence by the mounting width of the sheet, while the result is rounded up.

The length of the sheet varies depending on the desire of the customer and can reach 3 m. Or when planning the height of the fence, a mandatory ten-centimeter indent from the ground is taken into account.

The length of metal pipes-supports is determined by the sum of the following indicators: the depth of the drilled well and the height of the fence. The number of posts is calculated by dividing the perimeter of the fence by 2-3 m - the recommended distance between the supports.

Fence Installation

Step-by-step photos of building a corrugated fence show the whole simple algorithm.

The simplest scheme for building a fence from a profiled sheet does not imply a solid foundation, which makes it the fastest and most affordable.

Below is the procedure:

• For each supporting metal pipe, a well is drilled with a depth of 0.5 to 1.3 m, depending on the characteristics of the soil.
• A concrete mortar is prepared from M400 cement, sand and fine gravel in a ratio of 1:2:4.
• The pipe is leveled at the building level, fixed with concrete mortar and sprinkled with a mixture of sand and gravel.
• Horizontal lintels are welded to the supports, while an indent of 25-30 cm is made from each edge of the fence.
• The corrugated board is attached to the crossbars with self-tapping screws or other fasteners through each wave.
• Each sheet should be superimposed on the adjacent one by one profile wave.

Note!

With your own hands, it is within the power of every owner to enclose their possessions with a fence made of corrugated board.

The ease and reliability of the design, the minimum required tools and a simple algorithm have a positive effect on the speed, quality of construction and saving the family budget.

Photo of a fence made of corrugated board with your own hands

Note!

Note!

Profiled sheet is a great option for building a fence

The fence is the visiting card of any owner

Today the fence from a professional flooring is one of the most economic types of protections.

Installing a fence from corrugated board is currently the most popular and affordable way of fencing. site. The reason for this is the high degree of reliability of the material, its aesthetic appearance, ease of installation and long service life.

Combined fence made of corrugated board

Cozy courtyard surrounded by a fence of corrugated board

The presence of a large number of fences made of corrugated board in any settlement is not an accident. Reliable quality really provides this material with a high demand. But, before you decide to install a fence made of corrugated board, you should take a closer look at all the pros and possible cons of such a fence.

Fences from corrugated board are gaining popularity

Beautiful fence made of corrugated board

Advantages of profiled sheet fencing

• Making a fence from corrugated board takes little time
• The fence can withstand fairly strong gusts of wind

A corrugated fence has a large number of advantages

A fence made of corrugated board can also become a decoration of your site.

• Reliable protection of the site from noise, prying eyes and the possible penetration of unauthorized persons into your territory
• In case of mechanical damage, the material can be quickly and easily replaced

Corrugated fence material can be easily replaced in case of mechanical damage

Fence made of corrugated board - a strong type of fence

• Sheets of corrugated board for the fence have a stylish look and a lot of color solutions
• Long service life
• Affordable material cost

Fences made of corrugated board have a long service life

Fences made of corrugated board are becoming more and more in demand due to the reliability and strength of the material.

Cons of corrugated fencing

• The material requires special care

The fence from the profiled sheet will protect you from prying eyes

Corrugated fence material requires special care

• With the help of a profiled sheet it is impossible to achieve subtlety and grace forged fences
• Operational installation of a fence made of corrugated board requires special knowledge and skills in work

To hide the territory from prying eyes, you can make a practical fence from corrugated board with your own hands

This is where the disadvantages of profiled sheet fences end. It should be concluded that this material has proven itself only from the best side. But what is it and how is it made?

Fence from a professional flooring with decorative registration

Beautiful suburban area with a fence of corrugated board

Decking. production method. Kinds

Profiled sheets are made of galvanized steel. On special roll forming machines, the sheets are shaped into corrugations by cold stamping. Thanks to this method, the corrugated board acquires transverse rigidity, which increases its bearing capacity.

A fence made of corrugated board is a strong fence that can withstand even strong gusts of wind

The undoubted advantages of a fence from a profiled sheet are the durability of both the structure and the profiled sheet.

After rolling through the machine, an anti-corrosion polymer coating is applied to the profiled steel sheets on both sides. The polymer coating procedure is mandatory for corrugated sheets for fence and roofing. In this way, the material is protected from corrosion and exposure to ultraviolet rays.

The dimensions of the corrugated board for the fence and other structures (here we mean the length) are dictated by the customer. The use of rolled steel for the manufacture of profiled sheets allows you to perform this task. But the width of the material is set by the manufacturer. It varies from 980 to 1850 mm.

The use of a profiled sheet for mounting fences allows you to make the facade of the house more attractive and diverse.

Since the profiled sheet is originally a material for outdoor use, it does not change its properties under the influence of ultraviolet radiation, precipitation and temperature changes.

Types of profiled sheets:

• roofing or bearing;

Beautiful fence with a horizontal profiled sheet

• wall;

• universal.

Wall corrugated board is used for the fence

To answer the question of how to make a fence from corrugated board, you first need to select the material.

For the construction of fences, only wall profiled sheet is used. These structures do not have to support the heavy weight of the snow that has fallen, so strict rules do not apply to them. Material with a low corrugation (up to 21 mm) and a thickness of 0.5-0.7 mm will be the best option for building a fence and gates from corrugated board.

A fence made of corrugated board will muffle sounds coming from outside, as well as create a kind of sound-reflecting screen for sounds produced on the site

Beautiful fence decor from corrugated board

With regards to color solutions, manufacturers offer a huge selection of shades. Modern technologies even make it possible to apply various images to the surface of a profiled sheet. It could be an imitation brick, natural wood or stone.

Wood coated corrugated board

As a decoration, a fence made of corrugated board can be painted with oil paints.

Especially for the construction of fences, some types of corrugated board are produced, which have a pointed edge on one side. This is ideal for a fence.

A few tips for choosing decking

• Strictly check the thickness of the profiled sheet and its quality.

Stylish profiled metal fence

Fence decoration with flowerpots with live plants

• Review the manufacturer's certificates and ensure that the material is manufactured in accordance with all standards and specifications.
• Remember that the cheapest option always loses in quality. Find the golden mean between the durability of the material and your material costs.

The material for the corrugated fence must be made in accordance with all standards and specifications

How to build a fence from corrugated board

To calculate their capabilities, each owner of a land plot is interested to know how much a corrugated fence costs. First you need to determine the height of the fence, then measure the perimeter of the site. Knowing the width of the material, its price, the length of the fence and making some mathematical calculations with these parameters, you will get the result - the required amount of material and its cost.

Beautiful gray profiled metal fence

There are two ways to install a fence: with a foundation and without it. The second option significantly speeds up the workflow. But a fence made of corrugated board with a foundation is more reliable, and it looks respectable.

Two ways to install the fence: with and without a foundation

For all its merits, corrugated board is a simple material. Therefore, the decoration of this fence with decorative elements made of wood, brick or stone will be appropriate in this case. A good option would be, for example, brick fence and corrugated board.

A fence made of corrugated board is an excellent solution for people who want to build a fence on their site as soon as possible.

Decking has a large windage. Therefore, the sheets must be mounted on vertical poles. These fencing elements are made of different materials. A fence made of corrugated board with brick pillars belongs to the elite structures, has a respectable appearance. For such a fence, a reinforced concrete strip foundation is required.

A fence from a profiled sheet is a feasible task that can be solved without the involvement of specialists

If the conversation is about doing the work on your own, then it is better to choose a simpler option. For example, a fence made of corrugated board with poles made of pipes. It has a simple installation and a low price.

When buying profiled sheets, be sure to pay attention to the price - you should not save here

Corrugated fence with edging of each section

We prepare tools and building materials

Profiled sheets, the number of which has already been calculated.

Currently, many developers with great pleasure began to use corrugated board for the construction of fences.

Corrugated fence: durability and reliability

Supports. You can use profile pipes, as well as round sections with a diameter of 60x60. The distance between two adjacent supports is no more than 2.5 m. After measuring the perimeter of the site, it is easy to calculate the required number of pillars. The height of the supports should not exceed the height of the future fence plus 1-1.5 m, which are buried in the ground.

• For fixing profiled sheets, transverse logs are needed - a metal profile.

Rustic profiled fence

• Self-tapping screws for metal.
• Level.
• Welding machine.

Gorgeous profiled metal fence with turquoise edging

• Cement, sand, gravel.
• Container for preparing the solution.

Stages of building a fence

• Digging holes for supports is done with a garden drill. The depth of the pits is 1-1.5 m.

Installation of fence posts

• Installation and cementing of vertical racks (supports). The reliability and service life of the future fence depends on the quality of this stage. The supports are installed strictly vertically, which is checked by the building level. Further, the vertically installed supports are poured with concrete mortar, which should be bayoneted after pouring. The air remaining in the solution must come out. The foundation is left alone for three days.

Pouring the foundation for a corrugated fence

• Installation of transverse logs. These elements are installed parallel to each other, the extreme logs should recede by 20 cm from the ground and the upper edge of the support. Using a welding machine, the logs are securely attached to the support pillars. In the absence of such an opportunity, the logs are fastened with bolts and nuts.

Installation of horizontal logs for corrugated board

• Fastening profiled sheets to a reliable frame. This stage starts from the gate. The verticality of each sheet is checked by the building level. One sheet is superimposed on another for only one wave. Sheets are attached to the lags only with self-tapping screws.

Fastening profiled sheets to a reliable frame

Several additions to workflows

• After installation, the metal structural elements are coated with a primer, then with paint.
• The upper edge of the profiled sheets can be decorated with decorative elements.

After the installation is completed, metal structures must be protected from corrosion.

Fence made of corrugated board, decorated with graffiti drawings

• Under the lower edge of the fence, it is desirable to make a blind area. To do this, part of the soil is removed, and concreting is carried out around the entire perimeter of the fence.

Fencing Care

With proper operation and proper care, a fence made of corrugated board will justify the material costs and will last for many years. In this case, no special efforts are needed. The main condition is to periodically clean the fence from pollution.

With proper installation and care, a fence made of corrugated board will last for many years.

Do-it-yourself fences from corrugated board - video

Do-it-yourself fences from corrugated board - photo

Photo gallery (49 photos):

No suburban area can do without a fence. Even if the most friendly relations have developed with the neighbors, any owner still strives to fence his possessions at least along the outer perimeter. Agree, you feel much more comfortable in the yard when you know that you are not being watched, voluntarily or involuntarily, by strangers. Yes, and concerns for the safety of their own property stored in the yard or adjoining buildings are not so acute. Therefore, questions are always among the top priorities.

Not so long ago, the choice of fence design and materials for its manufacture was not so great. In our time, the variety of options is so wide that it is even difficult to list them. But, probably, one of the most popular materials is a profiled metal sheet (otherwise it is called a profiled sheet or corrugated board). This is due to the fact that the cost of a set of building materials for the construction of a fence from a profiled sheet is quite affordable for the average homeowner, and the construction of such a fence cannot be attributed to tasks of an increased level of complexity, that is, they can be carried out on their own.

Let's take a closer look at the advantages of such a fence, let's see how to build a fence from a profiled sheet with our own hands, without resorting to the help of a hired construction team and renting special equipment.

Some owners of suburban areas treat corrugated fences with some prejudice, considering them to be some kind of frivolous fence for their territory. And it’s completely in vain - a profiled sheet fence has a number of advantages that make it extremely popular.