How to make a stand for incense sticks. Wonderful incense and incense sticks at home Do-it-yourself stand for incense sticks

Recently, the East is in trend. Many began to get involved in oriental medicine, oriental motifs can often be found in the interior. Yoga and various therapies, including aromatherapy, are popular. If you are fond of aromatherapy, then you have probably used incense sticks. These sticks fill the room with pleasant smells, but smoldering, they crumble on the table or on the floor in the form of ash. To prevent this from happening, incense sticks are installed on a special stand that acts as an ashtray. You can buy a stand for incense sticks or make your own if you want the decor to be original. And in this article we will tell you how to make a stand for incense sticks from polymer or ordinary clay.

Materials:

clay
rolling pin
sheet metal (optional)
wooden skewer or wire
spray paint or varnish
knife or metal molds

Making a stand for incense sticks

Prepare polymer or ordinary clay so that it resembles plasticine in consistency.

Roll out the clay on a hard, flat surface, cut a rectangle out of the resulting layer with a knife. Smooth out the surface of the clay.

Using a small mold, apply a pattern to the surface of the clay.

Using a wooden skewer or wire, poke a hole for the incense stick.

From a strip of metal, make a template with which one edge of the clay rectangle can be bent and fixed until the clay dries. Let the clay dry for 24 hours.

After a hard day at work, you want to relax. And what in this case can help better than incense? Our master class is dedicated to how to make incense sticks and other nice-smelling little things for your home.

If you want to make homemade incense in any form - pressed cones, figurines or incense sticks - there are a few general rules to keep in mind:

Carefully measure each ingredient, if possible, use an electronic scale.

In order to grind the ingredients into a powder (if they are not in liquid form), it is best to use a heavy pestle, not a coffee grinder - you can control the size of the resulting granules and literally turn them into dust (this is especially important in the case of making cones).
Never try to grind wood resins with a machine - they will clog and break any blender or coffee grinder very quickly.
Very soft and viscous resins, such as frankincense and elemi resin, it is better to freeze a little before you start crushing - this will make the work much easier.
If you add a little finely ground powder (wood bark like cinnamon or some spices) to the mixture, then the resins will not stick to the walls of the mortar.

If you use sandalwood bark or cinnamon sticks, it can be very difficult to grind them into a powder with your hands. Replace them if possible.

Herbs, florets, and petals are usually finely chopped in a blender, but many like to grind them first in a mortar, use a sharp knife, or a combination of these methods. Try everything and find yours.

The peel of citrus fruits (lemon, orange, lime, any others) can first be dried and crushed with a pestle, or you can grate it on a very fine grater and only then dry it - this way the drying time will be drastically reduced.

To dried fruits, before drying to brittleness and crushing them, honey or a couple of drops of wine is often added, which gives the smell a very pleasant subtle shade.

Combine flavors and ingredients following recipes or create your own. Here is an example of one of the popular incense combinations:

1 part palo santo bark;
1 part tolu balm;
1 part styrax tree resin;
1/4 vanilla (powdered)

How to make incense sticks

Incense sticks are probably the hardest to make because they take a long time to soak and dry and require a special base. To make 20 incense sticks you will need:

20 pcs. thin sticks 28 cm long each (preferably special base sticks);
12 ml. oil base or dipropylene glycol;
6 ml. aromatic oils or mixtures of ingredients;
1 glass tube 25x250 mm;
2 pipettes;
test tube holder;
marker;
dryer (non-automatic, conventional for linen).

Thoroughly wash and dry the test tube, and then pour the oil base into it using a pipette. Mark the liquid level in the test tube with a marker.

Add aroma oil. Here you get a ratio of 1:2, but depending on the chosen aroma and its intensity, you can change it (1:1 or even 1:3).

Shake the contents of the test tube by closing its neck with your finger.

Put the sticks in the test tube (thick part down). The mixture will cover only a quarter of the length of the sticks, but during the standing time it will saturate the entire thickened part.
Leave the tube for 3 days at room temperature. Don't cover her!
After three days, take out the sticks and place them on the dryer. Do not place it in direct sunlight.

To check if the sticks are dry enough, blot them with a paper towel; if it is wet, you need to wait more.

On average, this can take another day.

After that, put the sticks in a bag or box where you will store them, or immediately put them on a stand and light them.

Original and simple ways to create holders for aroma sticks.

Oriental fragrances can create a soothing and peaceful atmosphere in the house. To feel light and calm, sometimes it is enough just to light incense and relax, inhaling the aroma and watching a thin stream of smoke.

Special stands for placing sticks are sold in stores. But if you do not want to spend money or prefer to create home decor elements with your own hands, then in a few minutes it is quite possible to make a holder yourself from improvised means.

You will need:

- round piece of wood

- a hammer,

- a small nail

- a stick of incense.

You can buy a blank of wood in hobby stores or cut it yourself from wood and process it.

Drive in a nail at an angle on one side of the block of wood. No need to drive the nail hard - its purpose is only to make a hole for the sticks.

Then use a hammer to remove the nail. The hole for the aroma sticks is ready! You just have to place the incense and enjoy the smells.

The stand can be painted with special paints, varnished or glued with beads and other decorative elements. Together with a set of incense, this will be a great gift for family and friends.

If you have not found a suitable wooden blank, do not despair. There are many other materials from which you can easily make a similar stand.

Making clay incense stick holder

Ideally, a decorative holder can be molded from clay yourself. At the same time, it can be absolutely any shape, in the form of an animal, a person or a plant. However, in this case, firing is required to obtain a ceramic product. And not everyone has the opportunity to use a muffle furnace. In this case, modern materials will come to the rescue.

So, self-hardening polymer clay will be an excellent material for making a decorative stand. From it you can fashion a beautiful bowl, a statue of a small Buddha or a frog with small holes for aroma sticks. Within a day, polymer clay will dry out and turn almost into stone.

You can also use plastic. This polymer clay needs to be fired, however, in order for the material to harden, 200 degrees is enough, i.e. conventional oven.

Gypsum and salt dough incense holders

The most economical option is to create a coaster from salt dough. The ingredients are in every home, they are inexpensive, and to make an amazing and unique incense accessory, you only need imagination and a little free time.

To make the simplest pebble-shaped stand with small holes for sticks, you will need wheat flour (1 cup), salt (1 cup), water (0.5 cup).

First, mix salt and water, then add flour and knead until a dense consistency that holds its shape. After that, you can start creating the holder. The finished product after drying should be painted or varnished.

From plaster, you can also pour a pretty stable figure that will hold incense sticks. To do this, just make holes at the top with a toothpick.

In addition, gypsum decorative products can themselves become sources of fragrance if you drop a few drops of your favorite essential oil on them.

The same applies to crafts from the test. It will take quite a bit of time to do. Earlier we wrote how to create such products.

People burn incense sticks for many reasons - for relaxation, for religious purposes, or simply because they like the smell of incense. It is important to know how to use them correctly.

Steps

Part 1

Choice of chopsticks and censer

Consider purchasing incense sticks with a core. Such sticks consist of a thin wooden rod (usually bamboo) covered (with the exception of 2–3 centimeters from the bottom) with an aromatic substance. The aromatic substance can be both smooth and smooth, and granular in appearance. The aroma obtained during combustion is usually quite intense, consisting of the smell of the aromatic substance itself and the burning wooden core.

Consider purchasing solid incense sticks. Such sticks consist entirely of aromatic substance and do not contain a core. They have a milder scent, so they work well in smaller spaces like a bedroom or office. Since these sticks do not have a core, their aroma is uniform, without the admixture of the smell of burning wood.

Find a suitable chopstick stand. These coasters, also called incense burners, come in many different shapes and sizes. The type of stand will depend on which sticks you use, with or without a core. You can purchase an incense burner that fits the chopsticks you use, or you can make your own using household items.

Consider making your own incense burner. You can make your own chopstick stand out of clay, or use a cup filled with something crumbly and non-flammable. Here are some options:

Blind a figured clay incense burner. Take a lump of natural self-hardening modeling clay and roll it into a flat sheet. After that, cut out the desired shape from it, using a craft knife or a pastry knife. You can leave the cut out figure flat, or bend its edges, giving it the shape of a vase. Take an incense stick and stick it into the clay, making a recess in it. Take out the stick and wait for the clay to harden before using it as a coaster.
Make an incense burner out of a bowl or cup. Take a vessel large enough to contain the ashes that fall from the burning incense stick. Fill it with grain, rice, salt or sand.

Light the tip of the incense stick. This can be done with a match or a lighter. Bring a flame to the wand and wait until it ignites.

Let the stick burn for about 10 seconds. The flame will go out on its own. When this happens, look at the tip of the incense stick. If a glowing smoldering light is visible on it, the wand burns properly. If the glow is not visible and the tip is covered with ashes, it is necessary to light the wand again.

Kindle the fire carefully. Fan the fire so that a smoldering fire is visible with a thin column of smoke rising from it; while you should not see the flame. After about 30 seconds, you will feel the aroma coming from the stick. These signs indicate that the stick is burning correctly. If you can't see anything and the tip doesn't glow, having an ashy appearance, it means that the wand is completely extinguished. In this case, light it again. This time cover the tip with the palm of your hand, gently fanning the flame.

Place the incense stick in the holder. If you are using a stick with a core, place the unscented wooden tip in the stand. If you have a stick without a core, it does not matter which end you fix it in the holder. In most incense burners, the sticks are mounted vertically or at a slight angle. If the stick is at a slight angle, make sure its burning tip is above the stand. If the top tip protrudes beyond the stand, cut the stick or place the censer on a wider fireproof stand.
- If you are using a bowl or cup filled with grain, rice, salt, or sand as a stand, gently stick the tip of the stick into the loose material so that it stands on its own when you release it. You can stick the stick vertically or tilt it slightly. In the latter case, the top of the stick should not protrude beyond the stand, so that the ashes from it fall on the stand, and not on the table or on the floor.
Wait until the stick burns out to the end. Most incense sticks burn for 20-30 minutes, depending on length and thickness.

Take precautions. As with other burning objects, do not leave a lit wand unattended. If you need to go away, extinguish the wand by dipping its burning tip in water or pressing it against a fireproof surface. Place the incense burner on a heat-resistant surface, away from curtains, curtains, children and pets.

Part 3

When you can and when you can not burn incense sticks

Use incense while meditating. Their aroma will allow you not only to relax and distract from extraneous thoughts, but also help you focus on the subject of meditation.