How to make glowing LED trees outdoors. "Wonderful Winter Tree" - a master class on making a tree from floor insulation with lighting from a garland How to make a light tree

Glow in the dark bushes and trees are a new fashion trend in lighting technology. Such lamps not only perform their main function - they illuminate the streets at night, but also decorate the city, emphasizing the features of the general atmosphere and setting the necessary accents.

Luminous trees for the street - LED street decoration

LED trees can be installed almost everywhere, but most often such unusual lamps flaunt at the entrance to a cafe, shopping center, restaurant, cinema, boutique, etc. So they become the very attractive highlight that lures visitors to these cultural places.

Luminous shrubs and trees are very similar to real ones, they completely imitate the shape of their prototype plant. The metal branches of the LED miracle are covered with artificial bark, life-sized plastic or silicone leaves and flowers are attached to them. Small single-color or colored LEDs crown the whole structure.

Such ornamental trees can be powered by the network, but more often they are equipped with an autonomous power supply, which somewhat increases the cost of the structure.

You can, of course, just decorate an ordinary tree with an LED garland (for example, you can use it), but the effect will not be good enough. What are the benefits of using LED trees?

In the photo - luminous trees against the backdrop of a winter landscape:

Advantages:

Durability, these lighting fixtures last at least five years;
Artificial trees do not require maintenance, which is so necessary for real ones;
A small amount of electricity consumed, even to illuminate the largest giants, a maximum of 700 W of energy is required;
Easy to install, here you can easily do without the help of specialists;
The design is resistant to low temperatures, high humidity and dust;
If one or more LEDs burn out, the rest of the lamp continues to burn, while the LEDs are easily replaced with new ones;
Properly selected bushes and trees can favorably emphasize the design of the landscape, become part of the overall decor. Of course, you can just use ordinary street lights for summer cottages.

All information about outdoor wall-mounted waterproof LED lamps can be found in.

Types and cost

We said that such trees need to be correctly selected, therefore, the conclusion suggests itself that there are a huge number of their species. LED trees can be of various colors and shapes, their size ranges from 0.8 m to 5 m. They are often installed as Christmas decorations. Read about the features of street lamps for the home.

palm trees

These exotic trees are usually made to be at least 2 meters tall and can be dyed any color. Simpler models are made in such a way that the trunk smoothly turns into sprawling branches and its structure and color are identical to the crown. In more expensive palms, the texture and color of the pillar is close to natural wood, and the leaves completely repeat the shape of the real ones.

Among themselves, such lamps can also differ in the number of branches, the thickness of the trunk, the presence or absence of artificial nuts or fruits.

Palm trees are most popular in sanatoriums, boarding houses, hotels and other recreational areas, because they successfully create an atmosphere of sultry fun and freshness of the sea breeze. The average price of luminous palm trees is 50-160 thousand rubles. You will find out what street ground lamps are at.

Willow

Weeping willow, glowing in the dark, gives lovers the opportunity to enjoy a date under a spreading tree at any time of the day, without taking their eyes off each other.

Here, flexible long branches are attached to the massive trunk, dotted with small leaves-plafonds, glowing white or any other color of the rainbow. Prices for willows range from 16,000 to 50,000 rubles.

Fruit trees

In order for spring to bloom 24 hours a day and 365 days a year, it is enough to install street LED fruit trees in the garden, in the country house or just somewhere on the street. Peaches, apple trees, cherries, apricots, pears will delight others with their lush flowering shades of lilac, white or pink.

On such trees, flowers and fruits are made in full size and look like inflorescences and fruits of real plants, like twin brothers.

The cost of such lamps depends on the selected tree, its size and number of branches. This is 12-80 thousand rubles. Read also about ground LED lamps by.

Maple

Stars glowing in the dark can be found not only in the sky, but also on the LED maple that illuminates the square or park. The price range of maples is 15-50 thousand rubles.

Five-pointed silicone or plastic leaves of different sizes on mighty branches are a good solution for decorating a public place, and the paths can be seen and the view is pleasant.

Sakura

This tree can be placed in a special category, since it is sakura that is especially popular. Such trees are especially beautiful, they are able to turn a simple everyday environment into a fairy-tale kingdom. The branches of these trees are covered with either special high-strength plastic or aluminum alloy, and are designed in such a way that they are very reminiscent of the real ones.
The lantern is strewn with large silicone flowers and leaves, while their density and shape seem to be copied from real Japanese sakura. Although such trees are made in small sizes, they give no less light than tall palm trees and branchy willows. The color scheme of the cherry blossom LEDs is very soft and delicate in gold, white, pink and purple tones. Such oriental beauties cost from 5 to 80 thousand rubles. Fairly high prices for luminous trees are largely due to the price of LED street lighting lamps that are used in their manufacture. Find out about street lamps for a country house.

In the photo - luminous sakura:

How to make your own hands from a New Year's garland

Draw a detailed diagram. Draw a sketch of the future tree on a sheet of paper on a scale, marking its height, the length of the branches, the number of luminous elements on each of them, and other necessary dimensions with numbers.
We measure the stem. Cut off a part of the required height from a metal-plastic plumbing or any other pipe - this will be a tree trunk.
We make a frame. From the wire, cut the required number of medium branches and many smaller branches. Bend them into an "L" shape so they can be easily taped to the base. Using black or brown electrical tape, fasten small branches to medium ones, then tape the latter to the trunk with the same adhesive material.
Let's move on to LEDs. Using a soldering iron, solder the resistors to the LED. Keep in mind that the latter have two legs - one is longer, the other is shorter. Make sure that all LEDs are soldered either only to the extended, or only to the shortened contacts of the resistor. To protect against moisture ingress, a good solution would be.
Isolate the LEDs. Take an insulating tube, the color of which matches the shade of the electrical tape, and the diameter is sufficient for the LED to easily fit inside it. Cut the tube, taking into account that the soldering point and the resistor itself should be hidden from the observer, but at the same time it is necessary to leave a place for connecting to the power wire. Put the tubes on the LED bulbs and lightly heat with a lighter so that the insulation completely wraps around the parts.
Attach LEDs. Attach each of the LEDs on small branches to the wires, respectively, of polarity and wrap with insulating tape. Now connect the wiring from small branches to the wires of medium ones, one wire per branch. We connect the bundle of wires received again so that all the pluses are together, and the minuses, respectively, are connected exclusively to each other. The resulting bundles can be immediately soldered to the main wire and run along the trunk, or you can first thread the wires from each branch into holes pre-drilled in the pipe, connect them together and solder to the main wire so that it is subsequently located inside the pipe. Do not forget to observe the polarity, and then insulate all bare conductors. Ensure uninterrupted operation in all weather conditions

In this article, we will look at the process of making LED trees at home.

There are 2 main ways to make LED trees. Let's consider each of them

1. Luminous tree based on LED garland

The day of the beginning it is necessary to make a frame. It is best made from aluminum wire. Simply bend the wire at the right angle, in the form of a small bush. If the wire is in white insulation, you can wrap it with black electrical tape, bringing the frame closer to a more realistic color.

We also fix the garland to the frame with black electrical tape.

You can additionally decorate the LEDs by cutting out decorative nozzles from transparent plastic for them.

The LED tree is ready. It remains only to connect it to a power source.

The obvious advantage of this manufacturing method is its simplicity. However, there are also disadvantages. A tree made in this way cannot be made large enough. The standard length of the garland does not allow placing LEDs on all the "branches" of the tree. If you use garlands over 10 m, then due to the large number of bends at the base, the central part of the frame will stand out too much. Therefore, we recommend using this method for making miniature trees.

2. Luminous tree based on LEDs.

Making an LED tree from single LEDs is a more laborious process, however, this method does not have the disadvantages of using a ready-made garland and allows you to make a tree of any size and shape. For manufacturing, we need single 5 mm LEDs.

We also need resistors to the LEDs in order to equalize the voltage.

Let's move on to production. First you need to solder resistors to the LEDs. At the same time, we try not to keep the soldering iron on the soldering contacts for a long time, as there is a risk of spoiling the LED. The LED has a short and long contact leg, we decide which of them we will solder the resistor to and copy to the rest in the same way. We shorten the legs of the resistors on one side.

We cut a heat-shrinkable tube for a wire of such length that the place of soldering and the resistor itself would be closed, leaving room only for soldering the power wire. We insert the tube on the leg with a resistor and slightly warm it with a lighter so that the insulation takes shape.

We also cut small branches, up to 10 cm in size.

We calculate the number of LEDs on one branch.

Next, we tape small twigs (10 cm) to the main branches (50 cm) with electrical tape. The number of small branches is recommended to be equalized with the number of LEDs on each main branch (in our case, 5 LEDs per branch). For ease of winding, take a small twig and bend it in the form of the letter "g", after which it is enough to attach it to the main branch and wrap it with electrical tape.

We wind the LEDs on the edge of each branch with electrical tape.

After that, we stretch the wire along the entire length of the main branch to the very end and cut the wire. Do not forget to take into account the bending of small branches and cut the wire to the desired length.

We bend 5 cm on each main branch and attach it to the tree trunk, we do it evenly over the entire diameter of the trunk.

When the branches are ready and tied to the trunk, we take the wires on each branch and wind them up, that is, we connect all the pluses and minuses of one branch. We do the same with all the main branches.

After that, you will get the number of pluses and minuses equal to the number of tree branches. We reel pluses with pluses, and minuses with minuses and isolate.
It remains only to wrap each branch with black electrical tape, decorate with decorative flowers and connect the tree to a power source.

On the eve of the New Year holidays, all cities, streets and shops are prepared especially carefully: everything begins to shine and shimmer with colorful lights, attracting the eye and reminding of the approach of the most important celebration.

By December, all buildings are transformed inside and out, avenues and streets shimmer with millions of lights. And the trees with the onset of the dark time of the day look like in a fairy tale. With the development of LED technology in our time, tree decoration has become very popular, it is no longer so expensive and very effective.

In this article we will understand what clip light is, what it is and how to choose the right one.

Clip-light is a LED street garland that operates from a step-down transformer (it converts 220V to 24V current, there will be no electric shock if the product is damaged) with an increased level of dust and moisture protection (IP not lower than 44), which makes it absolutely safe for of people. It can be used in all weather conditions, the operating range is from -40 to +60 degrees. During operation, the diodes do not heat up and do not harm the tree.

Types of Clip Light

The clip-light garland is very similar to the usual one, it comes in standard sets for 30, 60 and 100 meters. All of them go in segments of 10 m or 20 m, connected in series to each other. Comes with step down transformer. Operates in constant light mode.
Clip-light Spider are ready-made kits for decoration. In their kit, in addition to the transformer, there is a splitter for 3 or 5 beams.

Garlands are on PVC wire (it is recommended to decorate during the warm period, because with the onset of cold weather it hardens and may break during decoration), rubber or silicone (more suitable for installation in the cold season, they will not harden at negative temperatures below 20 degrees).

garland connection

The garland can be connected in series one after another, if you plan to hang it on the branches in the old fashioned way (this method is also suitable for decorating a high-rise Christmas tree). It is convenient to dress up a tree with a long garland - just wind it around the trunk or randomly distribute it among the branches.

If you plan to decorate a branched tree, then you need a clip-light spider, which comes with a 3 or 5-beam splitter. With the help of separate processes, you can draw each branch. The splitter can be placed in any part of the clipboard - both immediately after the transformer and between the strands of the garlands.

The process of decorating by winding does not require any technical devices, it is quite laborious, but it is thanks to it that you can achieve the maximum effect in decorating. If you want to find yourself in a fairy tale, you will have to work hard and carefully wind the wire around the branches, the more often, the brighter your magic tree will glow!

For an example of calculating the required length, you can use the table:

At the end of the season, we advise you to remove the winding from the tree - it grows and tightly wound wires can harm it. If you plan to use this decor all year round, we recommend that you remove the winding once a year and do it again.

If you still couldn’t decide, you still have doubts - just write or call us, the staff of the Zimnyaya Skazka online store will be happy to help you make the right choice!

With a few measurements and a simple plan, you can turn your yard into a magical winter wonderland by decorating your trees with garlands! In addition, you can decorate the house with a Christmas tree, perfectly complemented by bright light bulbs!

Here's what you'll learn in this helpful guide:

How to decorate tree trunks and branches with garlands
How to decorate evergreen trees
How to highlight bushes and fences
How to decorate a Christmas tree at home
Outdoor decorations for trees

How to do it: Trunks and branches

If you are interested in how to decorate trees with Christmas garlands, use the tips below.

Measure the girth of the tree trunk, as well as the girth and number of branches you want to decorate. Determine how far apart you need between the bulbs on the filament, as well as how far apart you plan to place each turn of the garland.

When decorating trunks and branches, the most popular distance between lamps is 15 cm with a distance between turns of 5-8 cm. To calculate the total length of the garland you need, divide the height by the desired distance between the turns and multiply the resulting value by the girth.

Example: we have a trunk 1.2 m long and 60 cm in girth, and we plan to wrap four thick branches, each of which is about a meter long and 15 cm in girth. To calculate how long we need a garland, we use the following equation:

1.2 m stem / 7.5 cm distance = 16 x 60 cm girth = 9.6 m garland

1 m branch / 7.5 cm distance = 13 x 15 cm girth = about 2 m garland per branch

The total length of the garland will be approximately 17-18 m per trunk and 4 branches.

When decorating trees, the available power should also be taken into account. If you use ordinary mini-garlands, you can connect up to 10 threads per 100 light bulbs in one line, which will be 420 watts. If you use professional options, you can connect up to 6 threads per 100 bulbs together. LED decorations allow you to connect up to 43 threads at the same time, or 210 watts, so there are no particular problems with them regarding the simultaneous connection of a huge number of light bulbs. The transition to economical LED garlands allows you to include the maximum number of decorations.

The best way to style branches

Trees decorated with purple and orange garlands for Halloween.

Most trees should be decorated with garlands along the trunk and 1-1.2 m along the branches. It is not necessary to decorate each branch, it is better to choose those on which the light bulbs can be placed most evenly and neatly. It is best to decorate the trees together, rolling the garland into a neat ball. The following steps will help you decorate your tree as easily as possible:

Start winding the first strand of the garland at the base of the tree. Make sure the plug is at ground level so that it can be plugged into the power cord.
Starting from the connector, systematically wrap the tree with a string of light bulbs, connecting the plug of one garland into the connector of the next.
Roll the garland tightly to prevent it from sliding down the trunk. If necessary, you can secure dangling wires or areas you're not sure about with plastic zip ties.
Increase the vertical distance between the threads on the branches in places where the garland will be wound in the usual and reverse direction.
Try to wind the garland threads closer to the tree to prevent them from being damaged by wind and bad weather.

DIY: Decorating Tree Trunks and Branches

The tutorial shown in the following images uses one LED garland for 70 bulbs, which is wrapped around a trunk 1.2 meters high and 30 cm in girth, as well as two branches. We recommend winding decorations more tightly and making more branches.

Step 1. Roll the garland into a ball to make it easier to wind, connect the plug to the power source at the base of the tree.

Step 2. Wind the thread up the barrel, leaving room for you to wind it in the opposite direction (if you like).

Step 3. Wrap the garlands in the usual and reverse direction along the length of the main branches

Step 4. Wind the garlands in the opposite direction along the trunk, securing the plug at the end

Dress up evergreen trees

Evergreen trees keep their canopy intact throughout the winter and include spruces, pines, firs and other species. Using the recommended number of garlands, you will be able to determine how many strings of decorations you need, as well as what size lamps should be. Check the bulbs before installation, especially if you are going to decorate large trees, as it will be almost impossible to fix the breakage after you have installed all the garlands. You may also need tees and extensions to connect your decorations to a higher tree.

Calculate how much power you need for the lights and make sure you don't exceed the limits
For decoration of large evergreen trees and pines, C7 and C9 bulbs are most often used.
Arbitrarily wind the garlands so that the bulbs light up in different places, remaining invisible and without disturbing the appearance of the tree.
By decorating the crowns of large trees, you will create bright lighting without the need to wind the garland to the very top of the tree.
Use extension cords to reach high parts of the tree

Garlands for bushes and fences

To quickly and neatly decorate bushes and fences, use mesh garlands. If you prefer to decorate bushes and fences with ordinary tree garlands, follow the basic rules:

Hang them randomly
When designing long fences, place the power source in the center of the fence, and stretch the filaments of the bulbs to the left and right
Attach garland strings to the outside of the bushes, covering the top and ¾ of the length of the bush from top to bottom.
Leave about 30 cm of ground clearance so that the jewelry does not end up in water or snow

How to decorate a Christmas tree with garlands

When decorating a Christmas tree that will stand in the house, the main effect that needs to be achieved is that the wires remain as inconspicuous as possible. If you wrap a garland of a branch, instead of just hanging it outside, you get a beautiful and evenly diffused backlight.

If you decorate Christmas trees with a garland with mini-bulbs with a distance of 20 cm, the wires can be wound more tightly around the branches.
Start at the base, leaving the end long enough for the plug to reach the outlet.
Wind the cord in both directions along the length of the branch, moving along the branches as close to the trunk as possible, and not leading the cord to the outside of the branches
When the garland reaches the top of the tree, start winding it in the opposite direction, leaving a slot at the top to install a decorative tip.

Now you know how to decorate both street trees and a home Christmas tree with New Year's garlands. You can complement the decoration with light figures from duralight.

What are glowing trees for? Luminous suit with your own hands. The LED tree "Sakura" consists of a frame and an LED garland with nozzles in the form of leaves and flowers. There are several ways to make a glowing tree with your own hands, just like the trees themselves look different. Several ways to make beautiful LED trees with your own hands at home at minimal cost.

In this article, we will look at the process of making LED trees at home. There are 2 main ways to make LED trees. A tree made in this way cannot be made large enough. The standard length of the garland does not allow placing LEDs on all the "branches" of the tree. Therefore, we recommend using this method for making miniature trees. Next, we make a tree trunk.

After that, we make the main branches, for this we take the wire and cut it 50 cm long. of which 45 cm is the main part of the branch, and 5 cm will be on the bend to fix the branch on the tree trunk. We bend 5 cm on each main branch and attach it to the tree trunk, we do it evenly over the entire diameter of the trunk.

After that, you will get the number of pluses and minuses equal to the number of tree branches. It remains only to wrap each branch with black electrical tape, decorate with decorative flowers and connect the tree to a power source. How to put a do-it-yourself rear-view parking camera on a VAZ 2112. Step-by-step video instruction. Head units for Android and Windows.

Video tutorial on how to install a navigator on a radio (head unit) with a Windows operating system with your own hands. Video instruction for connecting DIP LEDs to a circuit with your own hands. Video lesson. How to connect flexible LED neon quickly and easily with your own hands. In this issue we will tell you why it is needed, what it consists of and how to use it.

LED bushes and trees

Flexible neon in outdoor advertising. A step-by-step video tutorial on how to easily make an incredibly beautiful luminous neon costume with your own hands. Step-by-step video tutorial on how to make beautiful retro flexible neon letters with your own hands. Today we will learn how to connect candles without batteries from a 12 volt power supply with our own hands.

We thought a lot about how great it would be to find such a garland, and in the end, she found us herself. Welcome! A small video tutorial on how to make beautiful Christmas wreaths with battery-powered garlands with your own hands. We offer to start the new year with an unusual, original handmade Christmas tree.

The desire to decorate your house or apartment is familiar to all happy owners of real estate, as well as to those who have to live in a rented room. Glowing trees made of polymeric materials and equipped with a large number of small LED bulbs can be attributed to such useful decorations.

Decorative luminous tree on LEDs

Depending on the purpose of the lamp and the style of the room or landscape, there are trees completely without decor. Street lamps are mounted on the site or mounted on living growing trees. Some of these fixtures can be purchased in a completely finished form, others need to be assembled and connected.

LED trees - a new type of festive lighting

Of course, in order to get a complete picture, illustrating the equipment of an interior or landscape with a bright LED tree, one cannot do without indicating the prices for such devices.

Glowing trees for the street - a fairy tale with your own hands

LED strip for decorating growing trees (5m) - from 5 to 18 euros (depending on the frequency of placing lamps on the strip). Solder your own electronic design using separate LED bulbs, wires and insulation. Here, creativity is manifested in the choice of colors for the future tree and in the unique combination of ready-made elements.

One of the main advantages of LED garlands and lamps is their resistance to mechanical damage and exposure to aggressive weather factors. Bright LED trees were created for such connoisseurs of beauty in the environment and setting.

Imitating the shape of a tree or a bush, a frame made of a special light-alloy material, which is enclosed in a plastic shell. Decorative elements, which are LED garlands with silicone nozzles stylized as leaves and flowers.

Glowing trees: price and equipment

Twisted with a large number of sparkling light bulbs, LED trees are very similar to real ones. The alley of luminous trees seems to be calling to a fairy tale, causing delight, surprise and anticipation of a miracle even among adults. If you install a luminous tree in your office or store, it will surely increase the accommodating of customers and the willingness of buyers to make a purchase. LED trees are very popular as a New Year's decoration for an apartment, house or garden. They give a great mood to everyone who looks at them.

Creating an LED tree at home

Decorative luminous trees are not afraid of frost or heat, they are not afraid of rain, dew, hoarfrost. Even if one or more elements fail, the structure will not stop shining. It is better to decorate a large area with a tree a few meters high, of impressive size, which includes a huge number of LED bulbs.

Brightness and power of LEDs. The method of fixing the tree at the installation site. A variety of colors and crown shapes of LED trees creates a lot of opportunities to draw attention to the building, territory, interior. If you want to decorate your office for a holiday quickly and in an original way, decorate a garden or attract visitors to a store or entertainment center, there is no better option than LED trees.

With even minimal knowledge in the field of electronics, you can quickly make a luminous tree with your own hands. With a simple method of making an LED tree with your own hands, they use a ready-made garland, but making a tree by connecting the LEDs into a circuit on your own is somewhat more difficult.

Categories

Popular