Circulation pump 25 40 dzhileks. Circular pumps. Characteristics of pumps Compasses

Circulation pumps for heating systems are used to supply hot water from a heating boiler through a single or multi-stage piping system of a building or house, through heating devices (heating radiators, thermal convectors), and then back through pipelines to a heating boiler. The operation of the circulation pump ensures faster heating of the heated room and ensures uniform distribution of the coolant temperature over all elements of the heating system.

The heating boiler, which is switched off at the maximum allowable temperature, is switched on again when the temperature of the coolant drops to the minimum level, the cycle of operation of the heating system with the participation of the circulation pump is resumed.

Being indispensable elements of heating systems for houses and cottages, circulation pumps are practical: they do not require the installation of pressure sensors and additional protection of the electric motor. The use of circulation pumps is possible with any configurations and methods of heating systems regulation.

Circulation pumps used in water supply systems, as a rule, have an electric drive. When choosing circulation pumps for residential buildings, which are small in size and have built-in electric motors, their power is the defining characteristic.

Much more powerful circulation pumps used in manufacturing and commercial industries are selected by size. Standard electric motors for industrial circulation pumps are selected in accordance with technical specifications, and are connected using couplings.

Circulation pumps operated in closed heating and hot water systems, as a rule, have bronze or brass casings that are not subject to corrosion. To prevent corrosion processes, the coolant can also be treated with special additives.

Specifications JILEX COMPASS 25-40

Information about the technical characteristics, scope of delivery and appearance may differ from that indicated on the site. Specify this information with the manager when applying.

• Description
• Characteristics
• Documentation
• Reviews 1
• Where can I buy

Advantages

The body is made of cast iron.

Equipment

Connecting nuts.

Instructions for use.

Warranty card.

circulation pump DZHILEKS Compasses 25/60.

Description

Circulation pump JILEKS 25/40

Circulation pump DZHILEKS 25/40 The compass is used in heating systems for pumping water pressure in pipes and heating radiators with insufficient initial pressure. With it, you can quickly warm up the room. The pump can be used with water or any heat carrier and generates a good head of 4 m. Connecting dimension 25 mm. This model is designed for a small heating system (1st floor). This type of pump must not be used in drinking water systems. Before installing the device, be sure to flush the system.

Advantages

3 operating modes with convenient switch.

There is an air release valve.

There is a pump overheating protection system.

The body is made of cast iron.

Equipment

Circulation pump JILEKS 25/40.

Connecting nuts.

Instructions for use.

Warranty card.

Did this model fit? We recommend paying attention to its analogue - the circulation pump DZHILEKS Compasses 25/60.

The Bigam online store offers the circulation pump JILEKS Compass 25/40 to buy at a price below retail. You can order this model by calling the hotline 8 800 555 69 73 (toll-free) or by leaving a request on the website. We ship goods throughout Russia to Bigam retail stores or terminals of transport companies, you can also order courier delivery. Our service center accepts any equipment for diagnostics and repair at low prices and in the shortest possible time.

Characteristics

If you are a client of the Garden Mechanisms online store, then you can use the service of a qualified pre-sale preparation of equipment. It is implemented on the basis of its own Service Center, which has authorization and certificates from the world's leading manufacturers.

How the equipment starts in operating mode depends on its further operation. In our case, an experienced employee of the Service Center will perform a test run at idle. Especially for our customers, we will adjust and set up the equipment in such a way that it is ready for the upcoming loads. After that, if the results of the check do not cause claims, the instrument is sent to its rightful owner.

What are we doing?

• checking the complete set (when opening, it is checked whether everything is in place)
• assembly of the finished product (if necessary)
• adjustment check
• oil filling equipment
• lubrication control in gearboxes and gearboxes
• product launch

Everything for the Client

• As soon as the tool is unpacked for pre-sale preparation, a professional works with it. Therefore, we can guarantee the quality of our services.
• You get equipment 100% ready for work.
• Competently executed commissioning is excellent results in the future.

Important

When making a purchase of a petrol tool, the managers of the Garden Mechanisms online store offer everyone the service of pre-sale preparation. You can opt out of this service if you wish.

In what cases do they refuse pre-sale preparation?

• If you wish, you can receive the product in its original packaging and open / assemble it yourself.
• If the product is planned as a gift and traces of equipment operation are undesirable (fuel residues in the tank, filled oil, opened packaging).
• In the event that its further transportation is expected, which is impossible with the assembled product. For example, it is supposed to send the goods through a transport company or by mail, or further transportation is planned by transport, where the assembled product does not fit in size.

Pre-sale preparation cost

The price includes: unpacking and checking the complete set (when opening, it is checked whether everything is in place), assembly of the finished product (if necessary), checking adjustments, refueling equipment with oil, refueling, lubrication control in gearboxes and gearboxes, starting the product. Oils and lubricants are not included in the cost of assembling the equipment.

Gasoline is poured minimum amount. The approximate cost of assembly of the product can be found in the table. The cost depends on the complexity of the assembly and the time spent on it. Specify the conditions, terms and the exact amount of assembly / pre-sale preparation with the manager when placing an order. Free pre-sales training applies only to all products of brands and. The products of these manufacturers are marked with a special “Free presale” badge.

Installation and assembly of additional attachments for tractors and walk-behind tractors is paid separately and the cost depends on the type of equipment and the complexity of the work. Specify terms and cost of this service at managers.

Compass 25/40- a circulation pump for installation on a pipeline with a wet rotor from a Russian manufacturer company Gilex. This type of pump can be used in systems filled with water or ethylene glycol solutions. The temperature of the transported medium is in a wide range - from +2 to +110 0 С.

Features of the circulation pump of the Compass series:

Modern heating systems (or hot water supply) are often complex branched networks, and it is the task of the circulation pump to deliver the coolant to all heating devices. The pump of the presented series is installed directly on the pipeline and has a small size, and due to the fact that the rotor of the pump is “wet”, it has a low level of noise and vibration (the sound of the running rotor is absorbed by the coolant). This electric pump is designed for domestic use, therefore it can work with a coolant (water, ethylene glycol) with temperatures up to +110 0 C. From the design features of the Compass series, it can be noted that the pump is made of cast iron (corrosion-resistant material) and has 3 power levels. Adjustment is carried out manually, the speed selection lever is located on the body.

* - Product images used on the site may include additional equipment and components that are not included in the standard product package.

** - The technical description of the product is provided by the official representative office of the manufacturer and is relevant as of the date the product appears in our catalog. Manufacturer may slightly change the characteristics of the goods without our notice. We ask you to clarify the technical characteristics with managers in advance.

*** - The price of the product is valid for consumers of the "individuals" category. For legal entities, there is a completely different loyalty program: prices for goods can differ both up and down and depend on factors such as the frequency of purchases, the number of goods ordered, and many other features and circumstances. Read more about working with legal entities.

Dzhileks Compasses 25/40 - a model with excellent performance. Solid power ensures stable operation even under heavy loads, optimal dimensions ensure ease of installation, and the use of high-quality components and thoughtful design are the key to a long service life. And at the same time, the unit has an attractive price. Such equipment is bought to create reliable communications, as it is resistant to environmental aggression and does not require complex and costly maintenance during operation.

The circulation pump Dzhileks Circulus 25/40 is intended for circulation of water or the heat carrier in systems of heating with connecting size of a nut 1 inch (25 mm) and the maximum pressure of 4 meters (40 dm).

This pump provides fast warming up of rooms on which it works, and also uniform distribution of temperatures on all heating contour. Based on the technical characteristics and power of the Compass 25/40 model, it is mainly suitable for working in heating systems of only 1 floor.

Notes:

• "Compass" - pump series
• The first digit (25 or 32) is the connecting thread size in mm.
• The second digit (40, 60 or 80) is the maximum head characteristic in dm.

Technical features of the circulation pump Dzhileks Compasses 25/40:

• Save energy and reduce noise with 3-speed switch (3 operating modes);
• Nuts - protected against corrosion and immediately come in a set;
• Convenient air release valve;
• For the pump to work correctly, the pressure in the system must be at least 0.9 bar and not more than 10 bar;
• Installation dimension - 180 mm.

Selection of a circulation pump

For the correct selection of the pump, it is necessary first of all to answer several questions, namely:

1. What connection size is required, 25 or 32 mm?
2. Which floor should the coolant be supplied to?
3. What is the volume of the heating system?

Restrictions regarding the entire line of pumps Gileks Compasses:

• It is forbidden to use the pump in systems connected with drinking water supply and food;
• It is not allowed to operate the pump without coolant;
• Avoid pumping viscous or aggressive liquids, antifreeze, acids, alkalis;
• Flush the system before installing the pump.

Pickup. Pickup is free. Self-delivery point address: Moscow Region, Tomilino, Novoryazanskoye Highway 25km, st16, Pavilions 24G, 53B, the territory of the Stroymarket on Ryazanka market. Working hours: Mon-Sun, 9:00-19:00.

Delivery of sanitary ware in Moscow and the Moscow region is usually carried out the next day after receiving the application from 10:00 to 21:00 (without a courier time limit). An hour or two before delivery, the courier contacts the buyer by phone. The forwarder-courier may not contact the buyer who wished to receive SMS messages about the status of the order. In this case, an SMS message will be sent to the buyer's cell phone stating that the order has been delivered for delivery, where the contact phone number of the forwarding courier will be indicated.

If the value of the goods is more than 25,000 rubles. (excluding the discount: that is, taking into account the discount, the cost of the goods may cost less than 25,000 rubles), then we will deliver this product to you free of charge within Moscow (inside the Moscow Ring Road) and the territory adjacent to our warehouse (see map). in the event that the total cost of goods with free delivery is not less than 70% of the order amount, or when the order amount is more than 35,000 rubles. (including the discount: that is, the amount of the order, including the discount, must exceed 35,000 rubles).

Rise to the floor. Based on the specifics of the goods, as well as the fact that delivery is carried out by our delivery service, in most cases, by car (parking problems in Moscow), then all delivery is carried out to the entrance. Rise to the floor (with an elevator / without an elevator) is a paid service, its possibility, as well as the cost, are negotiated separately and in advance with the manager accepting the order. If the goods are oversized (up to 5 kg), then, at the request of the buyer, the forwarding agent-courier can deliver the goods to the door, but is not obliged to do this: forwarders are kind people and will almost always help the elderly and pensioners to lift the goods.

Delivery to the regions of Russia. Delivery throughout the territory of the Russian Federation is carried out by our partners: TC "SDEK", "Post of Russia", TC "PEK", TC "Business Lines", TC "Vozovoz". You can calculate the cost of delivery of goods to each specific address online in the product map by clicking on the link "Delivery in Russia".

It is possible to deliver to other shopping malls in agreement with our managers, however, in this case, delivery to the pickup point of another shopping mall is paid.

When paying with a bank card online in our online store, you (by email and / or SMS) will receive a link to the electronic receipt of your purchase within 5 minutes.

Possible payment methods:

• Cash
• By bank card on the site in real time
• With a bank card upon receipt of the goods both for delivery and self-delivery
• Internet money (Yandex money, Web money, Qiwi wallets and others).
• Bank transfer (possibly with VAT)