Technical characteristics of uniflex ekp, tkp, epp and etc. All about waterproofing Uniflex: technical characteristics and laying technology Material roll roofing uniflex

Uniflex is multifunctional and versatile with a wide range of applications. A bitumen-polymer binder is applied to a polyester or fiberglass base with a special filler and thermoplastic elastomer in the composition. For additional protection, sprinkles, film and foil are used.

Uniflex is a business class material that combines practicality and favorable cost. When choosing, it is necessary to clearly present the tasks set, and then the result will fully pay off all investments. It is also important to follow the installation rules. An almost complete analogue of Uniflex roofing material is. The finished coating will be of high quality and durable, and at the same time it will not require complex maintenance and will not cause other troubles.

Uniflex: technical specifications

Features of installation and use of Uniflex

Depending on the type, Uniflex is used for waterproofing structures and roofing. According to the manufacturing technology, several types are distinguished for creating the upper and lower layers (K and P, respectively). Installation is carried out on pre-treated horizontal or vertical surfaces using a propane burner.

Uniflex is quite versatile, so it is suitable for different climatic regions. This is the simplest way to solve the problem of protecting structures in the implementation of the most complex construction projects. Additionally, the material is suitable for the restoration and restoration of old coatings, including ruberoid roofs. The use of advanced technologies guarantees impeccable quality and a long service life.

Uniflex material modifications:

• - fiberglass base, top layer slate, bottom layer film
• - the base is fiberglass, the top layer is a film, the bottom layer is a film
• - the base is fiberglass, the top layer is slate, the bottom layer is film
• - fiberglass base, top layer film, bottom layer film

Uniflex is a multilayer material based on synthetic fabric. Layers of bitumen with polymer additives are applied on both sides of the base made of polyester, fiberglass or fiberglass. From the bottom side, the bitumen is covered with a fusible film with a logo, from the top - with mineral chips or a film.

Layers and components have the following purpose:

• base - a frame that ensures the strength of Uniflex;
• bitumen - waterproofing;
• polymer additives - increase in heat resistance and decrease in the brittleness temperature of bitumen;
• film - protection against sticking of layers in a roll;
• crumb - UV protection;
• logo - signaling readiness for gluing (melted when heated).

Uniflex rolls are marked with a three-letter marking:

Uniflex is supplied in rolls 1 m wide, 10 m long. The price of Uniflex depends on the type of base and coating, the thickness of the bituminous layer.

Application

Uniflex is used in all climatic zones for waterproofing roofs, foundations, basements, pools, underground structures, main pipelines. Wherein:

• Uniflex with a fiberglass base - for unused roofs, with a polyester and fiberglass base - for operated roofs;
• Uniflex with a double-sided film coating - for lining layers of roofs, waterproofing of building structures, with crumb applied - for the outer layers of roofs.
• Uniflex is glued to a clean, flat surface treated with a bituminous primer to degrease and improve adhesive characteristics. The main gluing method is melting the lower bituminous layer with a gas burner, the alternative is using bituminous mastic.

The use of Uniflex makes it possible:

• ensure absolute waterproofness of the roof - bitumen does not let water through, does not lose its properties when the temperature rises to +95 ° C, exposure to ultraviolet rays, chemically active substances;
• reduce the cost of waterproofing and roof operation - Uniflex, the price per m 2 of which is much lower than the cost of premium materials, is not inferior to them in anything, the strength of Uniflex ensures its laying without marriage, the roof is easily repaired, the service life is 20 years;
• reduce the requirements for the supporting structures of the roof - the weight of a square meter of a two-layer roofing pie from Uniflex does not exceed 10 kg;
• carry out roofing work year-round - Uniflex remains elastic up to a temperature of -20 ° C.

Uniflex from Ant-Snab

If you need to buy Uniflex in Moscow, please contact Ant-Snab. We receive waterproofing materials directly from TechnoNIKOL factories, so we sell them at factory prices with a minimum trade markup. Discounts are provided to buyers who purchase large quantities of Uniflex. Payment is made by bank transfer and in cash - through Alfa Bank or upon receipt of the goods.

To buy Uniflex at Ant-Snab:

• choose the brands that best suit your requirements;
• by entering the initial data into the online calculator, find out the required number of Uniflex rolls, the volume of component materials;
• fill out the order form on our website;
• when confirming the order, agree on the method of payment and the terms of delivery of the goods.

Within the Moscow region, Uniflex is delivered by the company's transport. The need to unload and rise to the floor should be notified in advance to our employees. You can pick up the goods yourself from the warehouse in Voskresensk. We guarantee quality products and friendly service. Call . We are waiting for you.

Uniflex has five layers in the structure, each of which performs its own role. The task of the base is to ensure the elasticity and indestructibility of the material, the bitumen-polymer layers perform a waterproofing role, and the protective layer in the form of a powder or film also ensures ease of laying, allowing the molten mixture to adhere reliably to almost any surface.

Uniflex TKP and other brands

This material is available in two types.

The presence of the letter K in the Uniflex marking indicates that coarse-grained dressing is used as a protective layer. You can buy Uniflex of this type for arranging the upper layers of the roof being formed.

Brands: Uniflex TKP, EKP, HKP.

The presence of the letter P - the use of fine powder or polymer film as protection. This type of Uniflex is suitable for laying the lower layers of the roof, as well as for waterproofing various structures and their elements.

Brands: Uniflex EPP, HPP, CCI.

Uniflex - price and characteristics

The service life of the material is about 20 years. The material has optimal protective properties in its price category. Uniflex can be used on any surface, both new and old, with any slope and under any climatic conditions. Thanks to the tests that were carried out on samples of the material, it was proved that it is able to maintain its properties for several hours even when heated to 1000 degrees. The characteristics of Uniflex make it a material that perfectly copes with UV protection, moisture and acts as a vapor barrier.

Application of Uniflex

Use of material is possible on horizontal surfaces, vertical, and also surfaces with a slope. With the help of this material, it is possible to carry out work on the repair of a roof covered with roofing felt or similar material.

Uniflex is easy to install. To carry out the work does not require specialized and complex equipment, as well as a large amount of time. The method consists in heating and melting the bottom layer with a propane torch.

With the help of Uniflex, you can not only install a new roofing carpet and repair the old one, but also provide reliable waterproofing of walls, create a water-repellent layer when building bridges or tunnels.

To solve certain problems, you should buy Uniflex with the necessary characteristics according to the marking.

Store the material in the vertical position of the rolls, and no more than two rows in height. If necessary, laying one horizontal row is acceptable. The same requirements apply to transportation. The material should be protected from direct exposure to sunlight. The Uniflex storage room must be dry and the rolls must be placed in containers or on pallets. The recommended shelf life is 12 months, although it is permissible to use Uniflex even after this time, provided that the properties and technical characteristics are preserved.

This roofing building material is a fiberglass base coated with a bitumen-polymer composition with reinforcement from reinforcing threads. In order to improve the reliability of the roofing sheet, a layer of protective crumbs of stone slate is applied to the upper side of the outer coating. Such a powder can be made in gray colors (standard), as well as have other colors, including red, green or blue. A fusible protective film is applied to the lower part of the base.

Advantages

Uniflex TKP- an attractive option for waterproofing flat and sloping roofs. This rolled material has proven itself excellently in practice and has received many positive reviews from experts. The main advantages of TKP Uniflex are:

• exceptional resistance to atmospheric precipitation;
• high tensile strength;
• reduced brittleness of the bitumen layer;
• long service life;
• convenient technology of application to the surface;
• affordable cost.

It is intended for the device of a waterproofing of buildings, constructions and building constructions.

Structure:

Uniflex is obtained by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.) to a fiberglass or polyester base. Coarse-grained, fine-grained dressings, foil and polymer film are used as a protective layer.

Specifications:

Storage

Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Transportation

Transportation is carried out by all types of transport in covered vehicles in accordance with the Rules for the carriage of goods in force for this type of transport.

Packing Details

Packing pallet with rolls - shrinkable white bag.

Brands:

Depending on the type of dressing and application area, Uniflex is produced in two grades:

Uniflex K- with coarse-grained dressing on the front side and a polymer film on the deposited side of the web; used for the device of the top layer of waterproofing with sun protection;

Uniflex P- with a polymer film on both sides of the canvas; used for the device of the lower layers in the multilayer waterproofing of building structures.

EPP

CCI

HPP

EKP

TCH

HKP

Material specification table:

Manufacturing jobs:

According to the Guidelines for the design and installation of roofs from bitumen-polymer materials of the roofing company "TechnoNIKOL", it can be used in all climatic regions according to SNiP 23-01.

TechnoNikol Corporation produces roofing roll materials, waterproofing mastics, soundproofing materials, etc.