"Tehnoruf H30": specifications and features. Technical characteristics of insulation Technoruf, H30, B60, application Purpose and scope of Technoruf H30
As the energy audit shows, from 20 to 25% of the heat can leave the building through the roof. This intensity of heat loss is primarily due to the fact that warm air always accumulates in the upper part of the building. The presence of an attic or technical floor reduces heat leakage, but does not completely solve this problem.
The most effective method of reducing heat loss is the thermal insulation of the roof with modern mineral insulation. "Tehnoruf H30", the technical characteristics of which we will consider below, is a slab of basalt fibers with extremely low thermal conductivity. It is due to this property that the material is most widely used.
In the article brought to your attention, the areas of use, mechanical characteristics, operational properties and installation features of various, in particular, "Technoruf H30" will be considered.
Description and composition of the insulation
Like any other mineral insulation, Technoruf H30 is a thin basalt fiber bonded with an organic binder. The structure of the material is similar to glass wool, but the mechanical strength is much higher. For ease of installation and transportation, Technoruf H30 slabs, manufactured by TechnoNIKOL, have a standard size of 1200x600x100.
Technical characteristics of Technoruf N30 insulation
The most significant operational properties are shown in the table:
|
Parameter name |
Units |
Technoruf H 30 |
|
Specific gravity |
||
|
Permissible stresses at 10% deformation |
||
|
Thermal conductivity at +10 °C, no more |
||
|
Thermal conductivity at +25 °C, no more |
||
|
Thermal conductivity, conditions A |
||
|
Thermal conductivity, conditions B |
||
|
Vapor permeability, not less |
mg/(m 2 hPa) |
|
|
Humidity by weight, no more |
||
|
Water absorption by volume, no more |
||
|
combustibility |
Purpose and scope of Technoruf H30
Basalt slabs are used as a universal heat insulator, however, it is most advisable to use the material when insulating flat roofs that do not experience significant mechanical loads. In addition, the Tekhnoruf N30 insulation, the technical characteristics of which provide effective both load-bearing structures and internal partitions.
Basalt slabs are little affected by moisture and aggressive chemical compounds, therefore they can be used both in industrial and civil construction, as well as in roof repairs.
Styling features
Before proceeding with the installation of plates, it is necessary to study their marking. In this case, H30 means that you are dealing with a basalt slab designed for laying the lower layer of thermal insulation and capable of withstanding a load not exceeding 30 kPa / m 2. If during the operation of the roof mechanical loads are not provided, the material with the brand "N" can be used without additional protection.
Otherwise, they act when using the roof as a supporting surface. To lay the top layer of the roofing pie, evenly distribute the load and protect the bottom layer from mechanical damage, Technoruf basalt slabs are used with the marking "AT", capable of withstanding loads from 45 to 70 kPa / m 2. Laying is carried out in several stages:
- The surface to be insulated is waterproofed with a plastic film or.
- With the help of special dowels with a wide washer, the Tekhnoruf H30 insulation is laid. During the fastening process, the formation of cracks and gaps between the plates should be avoided, and the plates themselves should be staggered.
- The denser upper layer is laid directly on the lower layer, avoiding overlapping joints.
- The top layer is covered with a PVC film membrane.
Advantages and disadvantages
The main advantages of Technoruf H30 insulation include:
- Low thermal conductivity;
- Resistance to high temperatures and open fire;
- Ability to restore shape and volume;
- High rates of sound insulation;
- Biological stability;
- Inertness to aggressive chemical compounds;
- Simplicity of cutting and installation work.
If the material is used for its intended purpose, in compliance with the laying technology, the service life can be 50 years or more.
As for the shortcomings, during the long-term operation of properly installed thermal insulation systems, they were not identified.
Dimensions, packaging and storage
To correctly determine the consumption, the dimensions of the insulating mineral plates "Technoruf H30" are given below:
Products are packed in a strong polyethylene film that protects the boards from atmospheric precipitation during transportation. The material is delivered on pallets or special linings. The best place for storage is a covered storage room, in the absence of such, it is allowed to store the insulation under a canopy on wooden pallets or waterproofing mats.
An environmentally friendly roofing heat insulator made on the basis of basalt fibers is the best method for insulating a flat roof. Ease of laying "Technoruf H30", high operational and technical characteristics, ability to withstand temperatures up to 1000 0 C and long service life, combined with an affordable price, allow this mineral material to be used in all areas of civil and industrial construction.
Technoruf H 30 This is a mineral wool board produced on high-tech equipment in accordance with high quality standards. The mineral basalt fibers included in its composition, fastened with an organic binder, are impregnated with a hydrophobic composition, which makes this material durable, wear-resistant, water-repellent, heat and sound insulating, resistant to chemical attack, non-combustible. Due to the uniform bonding of the fibers, the material is environmentally friendly, as it is not subject to crumbling and, therefore, the spread of dust, that is, it is safe for health.Application area
Insulation in modern construction Technoruf H 30 widely used as the first layer in multi-layer systems for the insulation of flat, non-exploited roofs. These special roofing materials perfectly cope with the functions of insulation, sound insulation on unloaded flat roofs, both horizontal and sloped. Excellent heat and sound insulation characteristics, ease of installation, strength and durability, wear resistance, incombustibility, hydrophobicity have made this material practically indispensable not only in new construction, but also in the repair and reconstruction of buildings of the widest functional purpose. It is widely used both in the construction of industrial buildings and private houses. The durability of the material, more than 50 years, allows you to save on all subsequent alterations. The roof insulated with this material will perfectly serve for decades without losing its thermal insulation characteristics, and the environmental friendliness of the material makes it safe for human health.
fire resistance
Minplates H 30 belong to the class of non-combustible materials with a melting point of the constituent mineral fibers of 1000°C and a melting point of the organic binder of 250°C. The temperature range at which this material can be used in construction is from -60 to 400°C. Thus, the material is universal for use in almost all climatic zones without loss of quality and high performance.
Technical characteristics of Technoruf H 30
| Parameter name | Technoruf H 30 | |
| Density, kg/m3 | 90-110 | |
| Compressive strength at 10% deformation, kPa, not less than | 30 | |
| Thermal conductivity at 10 °C, W/(m.°C) no more | 0,034 | |
| Thermal conductivity at 25 °C, W/(m.°C) no more | 0,036 | |
| Thermal conductivity under operating conditions А, W/(m.°C) no more | 0,041 | |
| Thermal conductivity under operating conditions B, W/(m.°C) no more | 0,044 | |
| Vapor permeability, mg/(m.h.Pa) not less than | 0,30 | |
| Humidity by weight, % no more | 0,5 | |
| Water absorption by volume, % no more | 1,5 | |
| Combustibility, degree | NG |
Consider the Technoruf B60, H30 insulator, technical specifications and prices, differences and applications. This building material will surely appeal to many developers.
What does he represent? In a nutshell, these are mineral wool boards. They are hydrophobized, non-flammable, used in PGS. Such mats are an ideal heat-insulating layer, which almost always has to be done during the construction of various. Their basis is the products of various mountain basalts using a low-phenolic binder. The result is an excellent sound and heat insulating product.
But why, for example, can you see Technoruf B60 and Technoruf H30 on the counter of a building market? Are these materials different? If yes, what is the difference.
The material, of course, is one, but the modifications are different.
The letter "B" in the name of the insulation means that it is intended for the top layer of the mounted thermal insulation. Accordingly, the letter "H" indicates that the plates can be used in the lower layer of insulation.
Technical characteristics of the plate Technoruf B60
The table shows in which specific areas of construction the product can be used. Technoruf B60 is good as one of the components of the upper heat-insulating layer on metal or concrete surfaces, corrugated board.
Now let's get acquainted with the second product.
Basic technical characteristics of the mat Technoruf H30
They are.
The properties of the product show that it can also be successfully used for thermal insulation of reinforced concrete and metal structures. Moreover, it can act as the main lower layer.
Are the prices of Technoruf H30 and B60 insulation affordable? Quite, one might even say that its cost and provided him with popularity. The price per square meter of a 100 mm thick Technoruf H30 product, for example, is approximately $6.7, moreover, you can find products with an even lower cost. By the way, the package usually contains 2.16 m2.
The roof of a building, regardless of the type and purpose of the object, is one of the main sources of heat loss. However, providing high-quality insulation here can be problematic.
This is due to the fact that the roof is most exposed to precipitation and constant loads. As a result, the embedded insulation does not withstand such extreme conditions, crumbles and loses its original properties.
Brief history and composition of the material
In 2008, company "TechnoNikol" launched a heater on the construction market, designed specifically for roofing. This is an innovative material that is resistant to almost any external influence, including atmospheric phenomena.
The products were called "Technoruf H30" and were intended for the arrangement of two-layer insulation of all types of roofs. Over the years of its existence on the market, thermal insulation has proven itself exclusively on the positive side, it is in high demand among builders and finishers.
"Technoruf H30" belongs to the category of mineral wool and is made on the basis of volcanic rock - basalt. The main component is processed under the influence of high temperatures - not less than 1 500 0 С.
As a result, a viscous mass is obtained, which dissolves into thin fibers in a centrifuge. This is the basis for the insulation boards. To prevent the components from disintegrating, they are bound with a low-phenol-based adhesive synthetic composition.
Scope of insulation boards
Due to its structure, Technoruf H30 has high technical properties, so it can be used in almost all sectors of construction.
The material is intended for:
arrangement of the roof on the buildings under construction;
reconstruction of old real estate objects;
multilayer insulation of flat roofs;
thermal insulation of a gable roof;
insulation of reinforced concrete structures.
Insulation is used to insulate structures made of profiled metal decking, and can be used in combination with rolled and mastic roofing materials.
"Tehnoruf H30" is not an independent thermal insulation - the sheets are placed in the bottom layer of the insulating cake.
The specifics of the application is determined by the letter "N" pointing to the bottom layer of insulation. Installation is carried out according to the following scheme:
the base is prepared and the vapor barrier is laid;
sheets "Technoruf H30" are stacked;
insulation is laid with markings "At 60";
plates are linked to the base with telescopic dowel-nails;
the final layer of the roof is laid.
The result is a high-quality thermal insulation layer that is resistant to significant temperature changes.
Advantages and disadvantages of thermal insulation material from TechnoNIKOL
It was mentioned above that the Tekhnoruf H30 is practically devoid of flaws, which explains the rapidly growing popularity of the insulation. The positive characteristics of the material include the following features:
Low thermal conductivity- even the minimum allowable thickness of the insulating cake reliably prevents heat loss.
Durability- if the laying technology and storage rules are observed, the sheets can serve up to 50 years without losing original qualities.
Water resistance- the material does not have the ability to absorb moisture, so it can be used without problems in conditions of high humidity.
Resistance to dynamic and linear loads- plates restore their original shape even after prolonged compression.
Minimum weight- installation work can be carried out by one person.
environmental safety- the composition does not contain toxic substances and chemically active components, which makes it possible to use the material in children's and medical institutions.
Easy sheet stacking- no special skills and knowledge are required, it is enough to follow the manufacturer's instructions.
Noise absorption- dense fibers do not let in street noise, which saves on laying a soundproof layer.
Neutrality to microflora- the material is not affected by mold and fungal spores, and also "does not cause interest" in rodents and insects.
High fire safety class- the insulation does not light up and does not support the spread of open fire.
The obvious disadvantages include the cost: the price of "Technoruf H30" exceeds many analogues. In addition, the link begins to melt at a temperature of about 300 0 С, which leads to the loss of useful properties.
The material appeared on the construction market relatively recently. It is possible that during long-term operation ( over 10 years) there are other problems.
Specifications table
The main technical parameters declared by the manufacturer are as follows.
|
Name of indicator |
Unit measurements |
Meaning |
|
|
Compressive strength at 10% deformation, not less |
|||
|
combustibility |
|||
|
Thermal conductivity |
|||
|
Vapor permeability, not less |
mg/(m h Pa) |
||
|
Humidity by weight, no more |
|||
|
Water absorption by volume, no more |
|||
|
Density |
|||
These characteristics are regulated by the requirements GOST therefore must be observed.
Dimensions, packaging and storage
Finished products are packed in bundles wrapped with shrink film. The number of plates in the package depends on the thickness of the product.
insulation, thick 50 mm packaged 6 pcs, sheet thickness packing 90 mm consists of three pieces.
Packing methods are not regulated, the main thing is that the film ensures the safety of the material during loading and unloading.
"Technoruf H30" should be stored in a warehouse, away from heating devices and sources of open flame. Packages are stored on pallets, the height of the stack should not exceed two meters. Short-term storage under sheds is allowed, provided that the products are reliably protected from precipitation.
Heat-insulating plates of the Technoruf H30 series are made of rocks of the gabbro-basalt group and treated with a special hydrophobized composition. Thanks to hydrophobization, the material is able to withstand short-term exposure to moisture.Technoruf H boards are used as the bottom layer when installing a two-layer roof insulation system and are laid on reinforced concrete or profiled sheet bases. These plates are recommended to be mounted together with plates of the Technoruf B series.
Perhaps your project will require sheets of corrugated board. Pay attention to this category Decking.
Advantages:
- belongs to the group of non-combustible materials;
- has a low coefficient of thermal conductivity;
- the correct geometry of the plates;
- stability of properties is maintained over the entire area of the material.