Deep frame for a picture with your own hands. Master class frame passe-partout modeling frame for a picture with your own hands gypsum paint clay polymer plastic. Photo frame from old magazines

You will need

  • wooden slats;
  • the cloth;
  • plaster molding;
  • plastic;
  • cardboard;
  • scissors;
  • tape measure, ruler, square;
  • hacksaw or jigsaw;
  • pencil or marker;
  • paints;
  • small nails;
  • adhesive for a specific material;
  • beads;
  • the cloth;
  • small accessories;
  • dry food;
  • buttons;
  • pieces of various materials;
  • finishing elements;
  • elements of children's mosaic, puzzles, constructor.

Instruction

Wooden picture frame

Wooden frames are a classic option for framing a picture. Usually they are created in a simple form, without complex decorative elements, in neutral colors. Make a wooden frame from a lath of the width you need. Determine the length of the blanks according to the size of the picture. Saw off 4 equal blanks in pairs and connect them together in the most convenient way, at an angle of 45o or by cutting into each other at 90o. For better fixation, drive in small nails without hats in the corners of the product. Next, attach the loop to, insert the picture and hang it in the prepared place.

You can not be limited to such a laconic product and, if the picture allows for such an option, arrange a wooden frame to your liking. For this, varnishing, painting, and fabric fitting are usually used. Additionally, you can decorate the frame with small objects, such as shells for a seascape, or tie a frame.

Soft picture frame

Soft frames are appropriate to create for framing light funny pictures or photos. First, assemble the frame frame from wooden slats, fasten the parts with small nails or glue. When calculating, keep in mind that the inner perimeter of the frame should be 2-3 mm smaller than the picture.

Make a template out of cardboard, outlining a frame around the perimeter. Cut out the cardboard model and cut it into 4 pieces. Cut out the fabric according to this cardboard template. If you want the frame to be voluminous, make all the details 2 cm larger and add a 1-2 cm seam allowance.

Fold the pieces of fabric and sew from the inside along the long side, turn it right out. Put the resulting frame on a wooden frame and evenly fill with filler to give the desired volume. To do this, you can use cotton wool, synthetic winterizer, small scraps of fabric. After filling, sew the fabric by hand with a blind seam along the front side. Sew along the short sides of the pieces. Bring the ends of the threads to the back of the product. Glue thick cardboard on the back of the finished frame.

How to make a cardboard frame

As a widely available material, cardboard is often used in crafts, and it can also be used to make an excellent frame for a picture. Special tools and skills are not needed, a cardboard frame is made quite simply, so its creation can be an option for joint creativity and.

You can use a cardboard frame, for example, to frame small compositions, children's drawings or family photos. There are many design options for this product, but the main thing is the creation of a neat cardboard base. Cut out the cardboard base. As it can use corrugated cardboard, any packing box. Cut out a window inside the base to fit the drawing or photograph for which the frame is intended. The optimal frame width is usually 4 cm, but you can take more.

Next, cut out the identical back of the frame and the leg if you intend the frame to rest on it. For the leg, leave a rectangle 7x17 cm, it must be sharpened from the end side. From the other end, bend the edge 2 cm wide.

The next step is to glue the frame. Glue the leg to it, to do this, bend the strip and grease it with glue, place it in the center of the back and press firmly to fix it. It is best to use PVA glue.

Next, you can start decorating the cardboard frame. For an original decoration, you can take any decorative elements: beads, small accessories, fabric, dry food (pasta, peas, millet), buttons, elements of a children's mosaic, designer, puzzles, pieces of various materials. When creating a composition, consider the style of the photographs or drawings that will be placed inside.

Frame for a picture from improvised materials

The creation of functional decor items from completely unexpected improvised materials is the trend of recent years in the field of hand-made. Originally designed such a frame is suitable for framing bold canvases, abstraction. In this case, baguettes can be made, for example, from a ceiling plinth, stucco molding or molding left after the renovation of the room.

Make the base of the frame from thin plywood or corrugated cardboard in the same way as described in the previous versions. Next, cut the baguettes from your chosen fillet or molding. The ends in this case will be connected at an angle of 45o. Take care in advance to create a special template on paper with a precisely adjusted angle.

Glue the prepared baguettes to the frame base. It is most convenient to work with a glue gun, but if it is not available, use universal polymer glue for fixing. Carefully cover the corner cracks and other small errors with putty.

Wait for the glue to dry completely, then once again go over the fillet along the corner seams and the line of contact between the baguettes and the frame base. If the error was significant and there are noticeable gaps in the joints, glue strips of foam between them, then carefully putty. Ideally, the ends of the frame on the outside should be treated with putty as a whole, drying and carefully sanding each layer.

Leave the product until the final layer of putty is completely dry, then paint the frame in the desired shade. It is desirable to take acrylic paint, but water-based paint is also suitable. For final fixing, a colorless varnish must be applied to the surface of the frame. It is preferable to use a water-based cleaner. Finally, attach a loop to the finished frame or make a leg on its back side. You can insert a picture.

Digital photo frames are inexpensive, but if you have a very outdated but serviceable laptop, you can make such a device out of it for free. Its advantage is a large screen, the disadvantage is a large power consumption.

Instruction

If possible, use a laptop that consumes as little power as possible. This is especially important if the photo frame will work often and for a long time. Keep in mind that modern laptop computers consume between 50 and 90 watts, while machines produced in the mid-nineties - about 30. But even this is more than a real digital photo frame (about 5 watts). Remove the battery from the computer - this will facilitate it and contribute to an additional reduction in power consumption.

Install a DOS-compatible operating system, such as FreeDOS, on your laptop. This will ensure almost instant booting once enabled. Create a folder on the C: drive with any name. Put in it all the photos that you want to view on the photo frame. Since DOS does not support flash drives, you will either have to use a CD to transfer images (if your laptop has an appropriate drive), or temporarily remove the hard drive from it and connect it with a USB-IDE adapter to a Linux or Windows computer. Remember that the IDE interface, unlike USB, does not allow hot disconnection and connection. All files must be in JPEG format.

Use LxPic as your photo viewer. It is much more compact than classic PV, SEA and QPEG. In addition, it is free, fast, and also supports almost all video adapters, from CGA to SVGA, and processors starting from 8086. True, for high-quality viewing of photos, a processor of at least 80386 and a video card no worse than VGA are recommended. Download this program from the page below. Place the lxpic.com file from the archive in the same folder as the photos. And add the following lines to the end of the autoexec.bat file:

cd folder
lxpic *.*/Y

Here folder is the name of the folder with photos and the executable file of the LxPic program.

The final preparations remain. With the laptop turned off, separate the end caps from the display hinges. Remove the display from its hinges to keep it on the cable. Carefully, without pulling on this cable, position the display on the back of the computer case. Bend a sturdy plexiglass stand on which the laptop and screen will be placed at a slight tilt back. This stand must have a rim at the bottom to prevent the screen from sliding forward. If desired, you can supplement the design with a decorative frame of any desired shape. But no matter how you style your homemade digital photo frame, be sure to keep it stable and keep your laptop cool.

Related videos

note

Do not try to open the display itself - it contains a high-voltage converter.

Sources:

  • LxPic program

These vintage frames with bottle vases will certainly create a spring mood in your home. They are not only very easy to make, but also save space in the room.

You will need

  • - wooden frames
  • - dye
  • - craquelure varnish
  • - leg-split
  • - bottles

Instruction

First, let's add some "age" to the frames. Cover with paint. Let it dry a little and cover with craquelure varnish on top. If you do not have craquelure varnish, then after the paint has completely dried, you can make scratches in some places and rub the frame a little with sandpaper.

When the frames are ready, take a piece of twine and make a loop around the top of the frame. This will make it easier to remove the bottles later for washing. With the other end of the twine, wrap the neck of the bottle several times and tie it.

Hello, dear inhabitants of the Country! I present to you the picture frame I just made and suggest you follow my example)

Naturally, it can be anything, not necessarily a frame. Using a similar technique, I made a vase, a candlestick, in general, who has enough imagination for what))

So, we need:
The base is a flat (!!) wooden frame, which you can buy at any art store or make yourself from four small boards. My frame size in light is 30x40. It will be the basis for the future frame.

Polyurethane ceiling plinth - sold in any construction market. Sold individually, usually each stick is 2 meters long. One stick was enough for me for a 30x40 painting.
In principle, you can just buy a plinth already with a pattern, make a frame out of it and not sculpt patterns with your own hands - but we are not looking for easy ways :)
You will also need polymer clay, putty, pva (or gypsum), paint, glue. But more on that below.

So, we carefully measure the plinth, cut it at 45 degrees in the right places, glue it together and glue the resulting frame onto a flat wooden one. For reliability, you can also use self-tapping screws.
I recommend stepping back from the inner edge of the wooden frame by 0.5-1 cm so that the inner edge of your future frame is not too thick. And, besides, such a step will decorate your future masterpiece.

We turn the frame over and see that on the reverse side the joint of the wooden frame with the plinth forms an ugly gap. We need to cover her up. This can be done with gypsum, and in the absence of it, prepare the mixture yourself by mixing construction putty with a small amount of PVA glue and adding a little starch for density.

It turns out something like this (I remind you, this is the reverse side of the frame).

Now we start making decorations for our frame. The process is simple, but long, especially if your frame is large and you want to decorate it generously.
I opted for the grape design. I printed out leaves of various shapes and sizes from the Internet, cut them out.

Now about polymer clay. I can’t work with self-hardening one, it loses its properties very quickly right in the hand. And I like to be distracted, so for myself I chose Sonnet baked clay.
It took me a pack and a half to get to work. Never leave all the clay in the air, cut off as much as you need, wrap the rest in a bag.
Open the clay, cut off a small piece, knead it in your hand. To work with clay, I use a piece of facing tile - I roll it out, a jar of pills (I roll it out) and a sharp knife with a thin blade. We roll out the pancake, put our pictures, circle with a knife, remove the excess, carefully apply veins on the leaf with the same knife.

For the vine, we thinly roll out a small piece of clay, you can do it right with your fingers. Carefully twist the ends onto a toothpick or cotton swab. And into the oven. The temperature and baking time are always indicated on the packaging.

Clusters of grapes - I made the base of a conical shape (at the back, that is, from the side of the frame, it is naturally flat), and the grapes are just small balls, I stretch it a little, rolling it between two fingers.

We alternately apply the grapes to the base, close the top with several leaves. We bake the already collected bunch. Note that if you combine individual pieces of clay and bake them, they will no longer crumble.

I took a large plinth, the corners of the frame turned out to be deep, I had to improvise how to close them more generously) It seems a bit boring with some leaves, so I decided to plant roses in the corners. Where can roses come from among grapes - don't ask, I don't know))
For a rose, we roll out a small sausage, it can be of irregular shape, it doesn’t matter.

Gently twist the edge of the sausage inward and twist it, picking up the clay a little, this will be the core of our rose.

We roll out the pancake, cut out three flat ovals, it’s not bad if they are slightly pointed (narrowed) on one side. We stick the ovals in a circle with the narrower side down around the core of the rose.

We make 3-4 such circles of three petals. In each next circle, we make the ovals of the petals a little larger and stick each petal so that it covers the junction of the two petals of the previous circle.
So your rosette will turn out more round, without corners.
Having made 3-4 circles of petals around the center, cut off the stem (but not at the root, it is better to leave a little, so that later it would be more convenient to fit it to the right place, you can cut it off after) and bake.
Please note that in the picture the rose is in a decanter - it is very convenient to keep it there so that it does not wrinkle while you cut out other petals. Or, alternatively, you can put a bottle in the neck.

Bow. We roll out (or cut out of a pancake) a long strip, fold the edges to the center. We make a bow knot with a small square of clay. We bend the parts of the bow with a toothpick.
Everything is shown in the picture.

We make two more stripes about half as long as the strip for the bow. We fold each one approximately as in the picture. Please note that each of the two stripes must be folded in a mirror, and not in one direction.

This is how we got a bow. You can bake already folded, but I advise you to bake in parts, it will be more convenient when you glue it.
Important - do not leave baking for later. When you have made a figurine, try to bake it within 2-4 hours, otherwise the clay may lose its properties in the air. Or just put it in a bag.

Let's start gluing. Because the corners of the frame turned out to be deep (a wide and high plinth was taken), then a lot of leaves would have to be laid. So I decided to make some kind of stand.
I just took a piece of wood and glued it on.

Covered with clay on top, removed it, keeping its shape, and baked. Then I glued it on a block and already glued leaves and roses on this stand. I prefer to glue on instant glue such as supermoment.

Well, then we glue, as fantasy tells us.
Those parts that are brownish in the picture are not another clay, but those pieces that I began to bake and forgot about them)) That's how they burned out) But for us it doesn't matter, we'll paint on top anyway.

We cover the finished frame with bronze paint in 2-3 layers. Because Since metallic paints usually have poor hiding power, I recommend that you first cover the frame with ordinary paint, for example, brown, and there are already two or three layers of bronze on it. Dry, varnish.

Cool trendy photo frames are an essential element of any interior. DIY photo frames can become not only a unique accessory for your home, but also serve as an excellent gift for family and friends.

In this post, the site made a selection of 14 cool ideas on how to make a photo frame with your own hands from simple materials, many of which are even at hand.

1. Frame of dry twigs

This option is suitable for creativity with children, they will be happy to help you first collect sticks in the forest, and then they will happily break them into short pieces.
What you need: wide brim frame, glue gun, sticks



2. Framed from an old rustic window frame


3. Photo frame from an old book


An unusual frame from an old book is a great example of a photo frame made from materials that are at hand. Suitable for a small but very sweet photo.




4. Frames made of cardboard tubes and toilet paper sleeves


Such a creative panel is suitable for some kind of photo story, for example, about your last trip.
What you need: toilet paper sleeves and any other cardboard tubes of different diameters, scissors, glue, paper cutter, pencil.
Step by step instructions in pictures below:

5. Large panel with metal mesh

What you need:

How to do:
Attach the metal mesh with a stapler to the frame on the reverse side. Attach photos to the grid with clothespins.

6. Dry moss frame

A stunningly lively photo frame made of real moss is a sophisticated decoration for your home.
What you need: old wooden photo frame, dry moss (can be ordered), glue.
How to do it: just glue the moss around the perimeter. Decorating will take no more than 30 minutes and will bring a lot of fun 🙂 This photo frame is suitable for a wedding gift.


7. Photo frame from old magazines


For this frame, for sure, everything is at hand. All you need: old magazines, a frame you want to decorate, glue (it's convenient to use a glue gun).

Step by step instructions in pictures below:

8. Photo frame made of thick sticks


9. Photo frames from ice cream sticks


These simple and cute frames are suitable for family and children's photos. In this example, ice cream sticks are supposed to be decorated with multi-colored tape, and we suggest hand-painting them.


And here is an even simpler version of the frame using sticks.

10. Brutal cement photo frame


What you need: cement, container for mixing cement, cardboard or box of porridge / cereal, etc., fasteners for the frame, glue, paper knife, tape, small pieces of wood (you can cut a branch).
Detailed step-by-step instructions in pictures can be found below:









Unique paintings require appropriate frames. For this, original frames that can be made from the most unexpected materials are suitable. The result of such work is always pleasantly impressive. If there are no ideas on how to make a frame, then you can be inspired by the experience of other craftsmen by looking at pictures on the Internet. This will help determine the material and texture of the future product. If the question arises, from what you can build a craft, then there are many options. It is worth choosing between them, based on your own preferences and the method of drawing a picture on a canvas. The genre of the composition should also be taken into account. It is recommended to start making crafts by determining the dimensions. To do this, you need to take measurements of the picture, which will be placed in the frame. According to these parameters, draw a rectangle on cardboard and cut it out. Next, you need to make a frame, which can be made of a variety of materials.

If you have any difficulties with how to draw up a profile, it is recommended to consider the following rules:

  • avant-garde style paintings do not fit in stucco frames;
  • restrained and thin frames are best suited for modern drawings;
  • charcoal and ink drawings do not need exquisite frames;
  • wood is a versatile material, suitable in most cases for creating crafts;
  • frames of restrained tones are suitable for watercolor paintings;
  • embroidered pictures look good with matte profiles.

How to decorate a craft, fantasy will definitely tell you in the process of work. If there are no ideas, then a master class will come to the rescue, which can be viewed online. Making a profile takes a lot of time and effort, but the result is worth it. To create the perfect composition, it is important to make the frame in the same style as the drawing. For example, drawings depicting wild animals look good in wooden frames. They can be pulled with laces on the frame, adhering to the chosen style. Marine paintings can be decorated with shell frames. It is also worth using small fragments of wood to decorate the frames of paintings depicting animals and plants.

How to make a frame out of wood can be remembered from labor lessons at school. There is nothing difficult in this. The parts cut to the size of the profile are interconnected with wood glue. If you have experience with wood, you can make a solid frame. In this case, the decor will not be needed. If you don’t know how to paint a craft, then you can stop at the simplest option: acrylic paint. It is suitable for most craft materials and has a huge selection of colors. But sometimes you can do without painting in one color. The frame can be decorated using decoupage technique. Printed paintings are transferred to the craft and covered with a layer of varnish to protect against sunlight and mechanical damage.

When asked how to paint frames, there are many answers. The most common option is the use of artistic acrylic. For a vintage effect, sandpaper is used.

Do-it-yourself picture frames from plinth: options to choose from

The easiest way to create a craft is to make it out of cardboard. It can be found in every home, so this is the cheapest way. If the drawing parameters are smaller than the size of the cardboard sheet, then you can cut the frame from the whole sheet. It should be decorated with light materials that will not create heaviness on the cardboard. It can be napkins, threads, cotton pads. You can cut flowers out of paper and color them. Then glue them onto a cardboard frame.

Wooden craft is suitable for painting. It can be made from four profiles. It is covered with a colorless varnish one or more times, depending on the desired result.

Plinth framing is suitable for paintings in the spirit of the Renaissance. They will suit the classic style in the room and to create an antique style. It is very easy to make such a frame: you need to connect the skirting board with hot glue. When buying a plinth, do not forget about decorative elements. They will be needed to decorate the future product.

The frame can be built from a baguette. This material will help create voluminous frames that are suitable for large compositions. Creative people will love the idea of ​​jigsaw puzzle frame design. Puzzles are suitable for decorating children's and student photos, as well as for modern paintings. If unused wallpapers remain after the repair, they are suitable for creating a frame. But it is undesirable to hang a wallpaper craft in the room where this wallpaper is pasted. So the wall will merge with the craft. Wallpaper with a large pattern is difficult to use for product decoration, it is much better to take a wallpaper with a small pattern. It can be cut and glued to the frame or completely covered with wallpaper.

You can make a metal frame for a picture for decoration in techno style. It is suitable for photographs, posters and posters. To create it, you need to stock up on a metal corner. The aluminum profile has several advantages:

  • does not need decor;
  • has a small weight;
  • securely holds the composition.

For a modular picture, the frame is made invisible. She hides under the composition. Modular paintings are attached to a wooden frame. The modular picture consists of several parts. When making a frame for it, you can designate each part by numbers so as not to confuse and attach the desired part of the picture to it.

Wooden frames have earned respect among users due to their versatility. They were also loved for their reliability and the ability to withstand heavy canvases. Wooden frames do not require decor, it is enough to cover them with a layer of colorless or colored varnish.

An embroidered picture requires a wide frame. For an embroidered composition, a matte frame is suitable. It will not divert attention from embroidery, successfully complementing it. To do this, you need to buy a matte profile, cut it to the size of the picture and connect it with Moment glue. It is recommended to take glass for embroidery with an anti-glare effect. Under artificial lighting, frosted glass will not reflect light and will fully convey the beauty of the picture. The matte frame is suitable for beadwork and diamond embroidery.

Dried flowers and petals, pebbles and feathers are suitable for a three-dimensional frame. Christmas frame should be bright. It can be supplemented with New Year's rain, homemade snowflakes or small New Year's toys. It will be interesting to look crafts with LED garland. You need to install such a composition near the outlet so that the electrical cord does not interfere. You can connect the cord to the power supply and use lithium batteries. An oval frame can be made from a solid block of wood or from whatman paper. It is suitable for photographs and portraits.

The manufacturing process is very exciting, and the result will please you in most cases, so even a simple frame will become a favorite decor element in the room and will always bring a smile. Original crafts are obtained in any case, because even following the template, the result is a masterpiece.

Frames can be made using the mosaic technique. For this, pieces of colored paper are suitable. The mosaic looks beautiful on medium-sized paintings about 40x50 in size.

Vintage frames never lose their relevance. They are combined with black and white photographs and paintings. The profile can be made much "older" by using sandpaper. Acrylic is rubbed with sandpaper randomly, and a feeling of an old frame burnt out in the sun is created.

Homemade frames are suitable for self-drawn paintings, for photographs. They can be made as a gift to family and friends. Crafts in the New Year's style can be presented to colleagues and friends. It will decorate your desktop or wall.

Fitting © 2022 Design and interior of apartments