How to make a table in the garage with your own hands? Folding table in the garage with your own hands What is a workbench

Most car owners use the garage as a place to store the car, preferring to repair cars in special services. However, there is a category of citizens who love to engage in a car on their own, repairing and upgrading it. To do this, you need a workbench in the room, on which it is convenient to repair various mechanisms of the vehicle. How to make a folding table in your own garage so that it does not take up much space, we will understand below.

The folding table has many features that distinguish it favorably from the usual design:

  1. A folding table installed in the garage does not take up free space and unfolds only when necessary.
  2. It performs various functions that are problematic to implement without it. On a folding table in the garage, you can fix a broken part, have lunch and spread out the drawings or diagrams needed when repairing a car.
  3. Fits beautifully into the interior.
  4. Can be assembled by yourself.

Note! Next to the folding workbench, you can organize a rack with tools, which will increase the convenience of work.

Material selection

The folding table is made from the following materials:

  • metal;
  • wood;
  • combination of metal and wooden parts of the structure.

The advantage of wooden folding tables made in the garage with your own hands:

  • low cost;
  • the tree is easily and quickly processed, taking the desired shape. No special tools are required to create simple structures;
  • wooden products give the setting a homely atmosphere, diluting the large amount of metal that surrounds you indoors.

A metal folding table mounted on a wall in a garage has the following advantages over wooden structures:

  • the durability of the metal is much higher;
  • sheet metal is harder to damage.

Metal cons:

  • hard to do alone
  • special tools are required;
  • some tools require some skill to use. For example, it is not enough to have a welding machine, one must know how to handle it;
  • more expensive than wooden models.

Many owners prefer to combine materials. This lightens the overall weight of the structure and reduces the final cost.

Design

Designing is the main and most difficult part in creating a folding table in the garage with your own hands. Without a well-prepared drawing, which indicates the main structural elements, you will not be able to properly purchase materials and prepare the necessary set of tools. The drawing is made independently or downloaded from the site and subsequently upgraded to the needs of a particular owner.

Important! Do not neglect the design stage, otherwise, after assembly, it will turn out that the design came out inconvenient and only gets in the way, instead of being useful.

Required Tools

For wooden structures you will need:

  • wood saw;
  • a hammer;
  • nails;
  • screwdriver or screwdriver;
  • screws;
  • roulette;
  • corner;
  • marking pencil.

When creating a metal model, you will need:

  • welding machine;
  • Bulgarian;
  • chalk for marking;
  • screwdriver;
  • a set of screws;
  • corner;
  • roulette.

Depending on the complexity of the selected drawing, an additional set of tools may be needed.

How to make a folding table in the garage with your own hands

The folding workbench is made according to the following algorithm:

  • collect the countertop;
  • we make supports that will support the structure in a disassembled state;
  • at the height of the legs, we attach a wooden bar or a metal corner to the wall. Loops will be attached to it, uniting the timber and the countertop into a single structure;
  • fix the supports.

Note! Do not forget to equip the work area around the workbench with electricity and proper lighting.

In order for the operation of the garage to be as comfortable as possible, its arrangement should be approached with full responsibility. Most motorists spend a lot of free time in the garage.

To create a convenient and comfortable environment, it is worth building a folding room indoors. This furniture design is especially relevant for a small garage.

In the garage, every motorist should have a well-planned workplace. A table with a folding mechanism will help not only competently organize free space, but will also please you with functionality. It can be used as:

  • workplace. Behind such a product, you can engage in minor car repairs;
  • table for tea;
  • laptop stands. Quite often, car owners resort to this method when repairing a car when they need the Internet.

If you are going to make a compact and convenient table in the garage, decide in advance on its location. Firstly, there must be good lighting in the place of its installation. Secondly, the product should not block the passage.

Advice: when building a folding model, numerous drawers and shelves can be built next to the wall for unfolding accessories and necessary things.

In any case, the folding table will delight you with functionality, ergonomics and ease of use.

What: wood or metal?

As for the choice of materials of manufacture, several options are allowed here. The main thing is that the material you choose has:

  • resistance to negative factors. The table should not deteriorate due to sudden changes in temperature and high humidity;
  • resistance to mechanical damage;
  • long service life;
  • strength and reliability. The furniture you build must be able to handle various loads.

You can build a table in the garage from:

  • metal;
  • combined materials.

To benefits wooden models include:

  • easy processing with hand and electric tools;
  • affordable cost;
  • aesthetic appearance.

But such a product is not able to cope with heavy loads, and its service life, unlike metal models, will be much less.

Important: a metal table, despite the complexity of its manufacture, will cope with higher loads.

It should be noted right away that there are much more options for making a desktop in the garage. Some car enthusiasts prefer to make completely wooden models, others strengthen them on top with a metal sheet. Someone stops the choice on a wooden frame and a metal one, and someone likes a completely metal product. There are no special requirements for the manufacture of a folding table in the garage. The main thing is that the owners feel comfortable working and caring for it.

But keep in mind:

  • it is quite difficult to make completely metal products on your own. If you have a welding machine and you know how to work with it, then you can try to make such a complex structure;
  • even a novice in this field can make a completely wooden product on their own. To do this, it is worth arming yourself with a grinder, grinder or an ordinary hand saw.

Drawing

Attention: before proceeding with the manufacture and assembly of the folding table, make a competent drawing. It should indicate the dimensions of the product and its materials of manufacture.

The finished drawing can be found on the Internet and modified to fit your needs.

Instruments

To make a compact and convenient folding table in the garage, you will need to prepare the following consumables materials:


From tools we will need:

  • welding machine;
  • electric jigsaw;
  • drill;
  • screwdriver

How to make a folding table?

So, the manufacture of a piece of furniture begins with its detailing. According to a pre-drawn drawing, we cut out the elements we need:


That's the whole simple process of making a folding table in the garage. On such a product, you can perform various types of work: drilling, sawing, cutting, grinding. In other words, a sturdy folding table can completely replace a workbench.

Advice: after making a durable and reliable desktop, the area around it must be equipped with sockets, additional lighting using wall lamps. On the walls, you can make additional shelves for storing tools.

Finishing

After making the table, it should be processed with various materials. If the product is made of metal, it is processed anti-corrosion agents.

If the table is made of wood, it is processed primers and paints. This not only improves the appearance of the product, but also increases its service life.

A photo

Depending on the materials used and the tasks to be solved, the result may surprise:

Useful video

A detailed description of the manufacturing process can be viewed in the following video:

Conclusion

In conclusion, it is worth noting that making a practical and reliable folding table in the garage on your own is quite realistic. The main thing is to correctly select the type of construction you need, make a well-thought-out drawing of the product, prepare consumables and tools. As a result, you will get a high-strength piece of furniture that will fully comply not only with your personal requirements and preferences, but also with the dimensions and features of the room.

In contact with

I don't have much space in my garage. Already wrote. But there is not enough space. The car comes in tight. Almost. It's okay to walk around. But I also want to do something.
So you have to apply your mind.
I really don't have enough space to hang out. Assemble-disassemble something thin and / or electronic. And also optical. That is "pure". On a workbench is not an option. Near dusty drilling-cooking-emery tables. Yes, and closely on a 50 cm workbench. Constantly it is necessary to disassemble it from everyone.
In short, it was decided to make a folding table in a clean area.
Moreover, folding, not lifting. Folding saves more space. If you still can’t put anything under the lift, you need a place for walking around the car. But on the wall, he will gobble up a place for shelves. And if you make a "sandwich", then it will no longer be a "table", but a child prodigy.
In short, reclining.
The design is a natural kitchen table made in Poland))) Due to the footing and cheapness, the hinges and rods are made of 3 mm metal and a circle of 14 mm. There was nothing else. A 14 mm circle does not fit inside the water pipe, so the hinge holders are simply cut from a 3 mm sheet. On the elephant, of course, well, figs with him. I don't like flimsy things.
The suspension is also from a 14 mm circle and the same holders. In order to be able to tilt the suspension to the side, free play is made in the holders for the suspension.
Everything is assembled on bolts and anchors. Shelves are made above the table, which are fenced and partitioned off with a plank of wood. The shelves are mounted on homemade supports. I cut them from a 2 mm sheet, and then I drill and weld them. When mounting the slats, nailer was used.
A distribution block is made above the table:
1. Source 12 V at 10A. When the source is turned on, the lower shelf lighting from the Chinese LED strip works.
2. Fastening under the tester
3. Sockets 4 pcs.
4. Switch for the source.
5. Switches for the hood and table lamp. The hood is now working as a "retractor", and the lamp is still being made.


















Notes:
* I almost never buy anything. I do what I have here and now.
** Why plywood and not sheet metal? Fanerka is light. And there is. And the metal is heavy and there is none. Therefore - plywood and asbestos.
*** Asbestos cardboard, yes. Asbestos. Not a fig not "pipets is harmful". They banned South African asbestos, which is fine dust. Only at the same time, for some reason, they banned the Russian one, which is tiny. And cheap. They introduced Kevlar. Which is insanely expensive. Also for some reason.

Initially, the owners of the boxes begin to make a table in the garage with their own hands if there is a need for processing wooden products, and a place is periodically required to secure the blanks. The classic version of such a workbench consists of a tabletop in which several holes of various shapes are cut, wedges are hammered in and combs are inserted to stop.

This is the very first version of the garage tables, which was used 20-25 years ago. Now the garage table has many shelves and several cabinets, and the design itself has changed over time. Let's start the article with a description of the design of the garage workbench.

How to make a table in the garage with your own hands - a description of the design

The simplest version of the table is made from the following elements:

  • Frame made of wood or metal on 4 legs;
  • Tabletop, 6-8 cm thick with a flat surface and smooth corners;
  • Shelves and drawers for tool storage.

If you need to make a table for working with metal products and spare parts, then you should get a metal workbench. If you need to periodically carry out car repairs and various carpentry work, a wooden workbench for the garage will be enough. Consider how to make a do-it-yourself locksmith table for a garage.

locksmith table for garage

In order to properly make the frame of the structure, you must first acquire a drawing or plan of the table. With the help of a clear model, you will be able to correctly represent the finished result and carry out all the work step by step. If you need not only carpentry in the garage, but also a place to process steel objects, then you can follow the following plan:

  • To give the frame rigidity, it is necessary to use an iron corner (the thickness of the corner is 5 mm, and the rib must be at least 35 mm),
  • In the form of a tabletop, you can use a 2 mm sheet of steel,
  • We straighten the metal sheet and fix it either on a 50 mm board or weld it to the frame from the corner,
  • For sliding shelves there is no need to use thick boards - plain plywood will also do,
  • In the form of corners for drawers, you can use a corner of 3 mm,
  • If you do not need a portable or folding table in the garage, then you can make a stationary frame, fixed with anchor bolts,
  • We weld the metal table top to the corner along the contour and clean the drops to smoothness.

A metal garage table is a versatile option for any room. By making a wooden desktop for the garage with your own hands, you can create a convenient place for processing any product. Next to such a workbench, it is also necessary to make a chair for the garage with your own hands.

Do-it-yourself wooden desktop in the garage - photo and video step by step instructions

For its manufacture, it is necessary to prepare photo materials and a project. Photos and drawings of the table in the garage with your own hands will help you understand what and how the workbench is made of. When building a workbench from wood, you will need the following tools:

  • Bulgarian with a set of circles,
  • Apparatus for welding and a set of electrodes,
  • Level and 2-5 meter tape measure,
  • Self-tapping screws with a screwdriver,
  • Manual jigsaw for cutting plywood sheet,
  • Electric drill.

Also, pre-prepare the materials for the working folding table in the garage:

  • Several corners 50x50 mm with a shelf thickness of 4 mm and a length of 5 m,
  • Square pipe 60x40 mm,
  • Steel strip for the curb with a width of 40 mm and a thickness of 4 mm,
  • Metal sheet for the table surface 2.2x0.75 m,
  • Boards for wooden crates (beam 50x50 mm),
  • Pieces of plywood for drawers and desktop walls,
  • Metal guides for cabinets and a set of self-tapping screws / screws for connecting all elements.

Stages of making a table for a garage with your own hands with a photo

First, we cut all the materials into the necessary elements. With the help of profile pipes we make a frame. Steel corners are intended for stiffeners. It is also additionally necessary to prepare a corner for edging the table surface.

Next, you need to properly weld the power frame of the workbench. First, we weld all the cut elements for the countertop. Then, to the finished frame, you need to attach the frame from the corner by welding, into which the boards for the tabletop surface will be inserted. After we actually succeeded in making a garage table in the form of a frame, all that remains is to weld the side legs around the entire perimeter of the workbench.

The next step is to weld the structure under the drawers. At the same time, a square frame for drawers is made of a pipe, which is fixed to the tabletop on both sides of the workbench. The frames will only need to be reinforced with longitudinal ribs.

The metal frame of the garage desktop is completely ready, it remains only to fix the crate of the finished panel to secure spare parts and equipment. As a result, it remains only to fix the panel by welding it to the countertop.

In fact, a folding table in the garage is made according to the same principle as a stationary one. The only difference is the use of loops that are attached to the side of the table. After making the structure, it remains only to sand well and paint the countertop along with the frame. If you want to extend the life of such a workbench, it is best to treat the boards and cabinets with an antiseptic.

Do you want to ensure maximum convenience when working with the workplace? Make a sofa in the garage with your own hands and fix a stationary lamp over the table, which will have a bending stand. With a small lamp, you can easily direct the light to the right places when repairing and cutting products.


This folding table is perfect for those with a small, small garage. After all, it does not take up much space, you can do it yourself using an old interior door.


To make a folding table we need:
- a door.
- 2 wooden blocks 20 x 94 x 2032mm - front rail.
- 1 board measuring 32 x 67 x 2032mm - shield mount.
- 2 pieces of 20 x 67 x 100mm PAR - leg blocks (adjust this to accommodate the folding leg brackets).
- 2 pieces of wood 44 x 44 x 860 mm - legs*
- self-tapping screws or screws.
- 3 butt hinges, 100mm and 16mm screws.
- 2 folding leg/flap brackets and 25mm screws.
- 4 dowels 6 to 8 x 90mm long screws.
- Pine will be the best option for wood.

INSTRUMENTS:
- electric drill,
- orbital sander,
- tape measure and pencil.

* Adjust the height of the legs for the height of the table.

The progress of work on the manufacture of a table in the garage

1 . Set aside the finished doors for now.

2 . We cut out the bar and fasteners of the same length as the doors and the width and thickness of 20 x 94 mm and 32 x 67 mm. Most standard doors are 2000mm high, but double check as they say: "measure seven times and cut one".


3 . We drill a bar to secure the shelf bar to the top of the mounting bar. The rear shelf is flush with the mounting plate.

4 . On the front of the table, drill a hole for mounting under the top of the front rail. Secure with self-tapping screws or screws.


5 . We saw out two legs and fasten to the underside of the table with 30 mm screws. We fix each leg on sliding hinges, and then mount it to the table.


6 . We install the hinges to the back edge of the table (door). We fasten 2 loops stepping back 100 mm from the edges and one in the center of the table.


7 . Secure the other side of the table to the mounting plate with 30mm screws.


8 . In order to assemble the working folding table, mark the place on the wall for attaching the mounting spike. Measure from the floor the average leg height (860mm) plus the foot ramp (20mm). Use a spirit level to mark a straight line on the wall. Mount the mounting plate above this line. Use dowels and screws to secure the table to the wall.
Fitting © 2022 Design and interior of apartments