Self-supporting ceramic granite slab 20 mm thick. Paving stones of different thickness. Scope of paving stones

Modern technologies for the production of decorative paving allow the production of paving slabs of various shapes and thicknesses, while its strength and other performance characteristics remain unchanged both for models with a thickness of 20 mm and for tiles whose base is more than 70 mm. The only difference of this type of clearance can affect the direction of the pavement.

What are the main characteristics of paving slabs with a thickness of 20 mm, where it is used, what features of its installation will be considered further.

Paving slabs "Old Town" 20mm

Paving slabs with a thickness of 20 mm have the following features:

frost-resistant, not affected by natural phenomena and temperature changes;
aesthetics, which is created with the help of numerous variations of the ornament when laying, shades, texture of its surface;
does not fade and soften;
environmentally friendly, made from natural materials;
maintainability: replaceability of a damaged element, multiple installation;
moisture-absorbing, does not dry out;
warranty over 15 years.

Attention! Given the tile thickness of 20 mm, it is not designed for strong mechanical stress. Those. can be used exclusively in the design of landscape design in those areas where cars do not drive: country paths, when decorating a garden, miniature playgrounds, etc.

Models of paving slabs with a thickness of 20 mm can differ from each other in the following parameters:

the material from which they are made: concrete, rubber, polymer sand, porcelain stoneware;
production method: stamped or vibrocast;
surface size (length and width);
shape: paving stones, rhombus, square, coil, etc.;
stylization and number of shades.

The main advantage of such a tile is its affordable cost compared to other more massive types of tiles, as well as the variation in shades and shapes during production. Therefore, when choosing it, there will be no problems regarding the scarcity of the assortment.

It is important to know that, depending on the thickness of 20 mm, the laying of such paving slabs takes place in a matter of days and you can do it solely on your own. This will also save you a lot of money. No need to figure out what kind of soil to pave it on. Considering the unloaded area, it will be enough to level the surface, having previously deepened it by 10-15 mm, and cover it with sand or gravel. When installing, do not forget to make gaps of 3-4 mm, which are then filled with silicate glue, which will ensure the tile is immobile and fits snugly to the rest of the elements.

If you are the owner of a private courtyard, a country house or a summer cottage, then you probably want to have a neat and well-groomed yard. In order not to face the problem expressed in the excessive growth of weeds, it is better to use paving slabs for decorating the territory.

Brick, concrete and asphalt today are already relics of the past, tiles rule the roost. It is presented in different forms, and is united by one term - sidewalk. In order to choose the most optimal option for it, you need to familiarize yourself with the parameters. Previously, there were state standards for everything, but today the situation is much more complicated. Manufacturers make tiles in different sizes, fitting them to their own needs, and not to general categories.

Some suppliers try to save raw materials, others buy imported lines with certain units of measure, while for third suppliers the form is more important. With the help of paving slabs, you can create a variety of patterns, resulting in a territory with unique variations, solutions and combinations of patterns.

Tile thickness

The visual component of the future territory depends on the width and length of the described products. Important in this matter is also the fact how well the material will fall into place. But the thickness of paving slabs determines its purpose and is one of the main performance indicators.

From the assortment offered by the selling organizations, tiles of several categories should be distinguished, among them are the products:

for footpaths;
to create universal coatings;
for the formation of monolithic territories.

The thickness for footpaths is 30mm. This option is the most budgetary and is used for garden paths, paving sidewalks, creating a blind area near the house, erecting steps, areas around the porch, as well as areas under sheds. Such products, however, are completely unsuitable for creating driveways, because they do not show the ability to endure high loads during operation.

But if you want to pave the area around a barbecue or outdoor barbecue, then pedestrian paving slabs will be a technically justified solution, which, according to experts, is the most acceptable.

Universal tile thickness

If you are interested in the thickness of paving slabs, then you should familiarize yourself with universal products, their parameter mentioned above varies from 50 to 60 mm. Such products are more expensive, but their scope is much wider.

Universal tiles fulfill their role if you lay out park areas, paths and yards with it. You can also use such a cladding for driveways, as well as the floor in the garage, if it is planned to be used to store a car or minibus. With this tile, you can pave all the territories around the house. These products will be able to withstand almost any load.

Thickness of a monolithic coating

The thickness of paving slabs will be different if we are talking about monolithic products, in this case the described parameter varies from 70 to 80 mm. However, it may be more. Such products are quite expensive, and specialists charge a high price for the work on their paving. This coating is intended for driveways, parking lots, areas where trucks will pass, as well as areas that are planned to be operated under high loads. However, the monolithic coating is not afraid of any operating conditions.

For reference

If you are interested in the question of what thickness of paving slabs will be the most optimal if you need to equip a personal plot in the garden, then it is best to use products whose described parameter starts from 30 mm. The maximum value for paving slabs is 60 mm thick. This approach will save money, because the product has an acceptable cost and has all the necessary characteristics. If you follow the laying algorithm, then the tile will fully exhaust its resource. However, it is not recommended to use it in those areas where the loads will be large enough, for example, access roads.

Features of 20mm tiles

20 mm thick has some positive features, among which are:

frost resistance;
aesthetics;
ecological safety;
ability to withstand solar radiation;
maintainability;
15 year warranty.

Such a coating is not intended for strong mechanical loads. You can use it in the design of landscape design and in those areas where cars will not drive. This should include cases when you need to arrange a garden or pave a path, as well as make a miniature playground.

You should know before choosing a thickness of 20 mm can be classified according to several criteria, among them:

production method;
base material;
surface size;
amount and style of shade;
the form.

As for the material, the tiles can be based on:

rubber;
concrete;
porcelain stoneware;
polymers and sand.

Tiles can be made by vibrocasting or stamping. The main advantage of such a coating is the affordable cost compared to those tiles that have a more impressive thickness. Laying such material is much easier to carry out, this is confirmed even at the stage of preparation, when it is necessary to remove the soil for installation work. After all, if the thickness of the tile is more impressive, then the volume of earthworks increases. In addition, such paving slabs do not require the use of hired force during laying, which allows significant cost savings.

No need to think about the question of what kind of soil to use as a base. For the reason that the site will be unloaded, the surface should only be leveled, deepening a maximum of 15 mm. The base is covered with sand or gravel, and during installation, you only need to remember the horizontalness of the coating and the need to maintain gaps between products up to 4 mm. After they are filled with silicate glue, which provides the tile with a snug fit and immobility.

Features of 30mm tiles

30 mm thick also has its own characteristics, it:

environmentally friendly;
consists of natural ingredients;
not afraid of temperature changes;
chemical resistant and easy to clean.

Such products can be produced not only by vibrocasting or vibropressing, but also by hyperpressing. The last type of work involves the supply of the composition under the influence of high pressure into the hyperpress.

For an independent one with such a thickness, the following materials may be needed:

coloring pigment;
sand;
cement;
water.

In order to make the tile more durable, a plasticizer should be added to the ingredients. Self-mixing of the composition must be accompanied by compliance with the proportions. If we are talking about sand and cement, then they are added in a ratio of 1 to 2.

The mixture is stirred, a dye is added to it, and then water, until a thick composition can be obtained. The solution is mixed in special containers, and then poured into molds that can be made independently or purchased at a hardware store. Molds can be silicone or plastic. The latter are more durable, but silicone ones, as practice shows, are more convenient to use. Before use, the form must be lubricated with dishwashing detergent or a special substance.

More about thickness

Paving slabs with a thickness of 40 mm, as mentioned above, can be used for pedestrian areas, this should include paths, footpaths and sidewalks. But for heavy loads, such a tile is not intended, which cannot be said about the one whose thickness is 60 mm. On such a surface, the movement of cars and pedestrians can be carried out. Such products are suitable for bicycle paths and entrances to garages.

Thickness Leaders

If you have a tile in front of you, the thickness of which reaches 80 mm, then it will already be able to withstand heavy traffic. The thickest is 100 mm tiles, which can be used to pave a reliable surface for trucks. It will be able to bear the weight of any vehicle.

Size selection

If you are faced with the question of what thickness of paving slabs for a car to choose, then you should know that you can use products from 60 mm for this. However, many consumers are also interested in whether they prefer large or small products. Here you should take into account several nuances. One of them is expressed in the fact that when using a small finishing element, more seams are formed on the surface. They will distribute the load well during intensive use of the surface, which is especially important for parking lots and garage entrances. But for direct garden ones it almost doesn’t matter, so you can use elements of any size and shape for them. If you have to pave a terrace with an irregular shape or an arcuate path, then it is better to prefer small paving stones, as this material allows you to create intricate radii.

Manufacturers of ceramics, taking into account new approaches to ensure the environmental friendliness of the facing material and modern production technologies, present unique collections of products to the world market. This is an innovative porcelain tile with a thickness of 20 mm, with high parameters of strength and durability, complemented by original designs and textures stylized as natural stone (marble, onyx, granite) and precious woods.

The combination of the high aesthetics of the created coating and the phenomenal strength of porcelain stoneware 2 cm - these are fashionable interiors not only for private houses, apartments and commercial premises with high traffic. This is the emphasized individuality of a suburban private property or building when organizing facade cladding, a house adjoining area or a street entrance area.

Advantages of 20 mm porcelain stoneware

The basis of the advantages of using a facing material, which is a 20 mm thick porcelain stoneware, lies in the following technical and operational parameters:

High degree of moisture resistance and resistance to sudden temperature changes;
Resistance to aggressive chemicals and ease of maintenance;
A variety of textures, colors and patterns with the possibility of combining elements from the same collection;
Preservation of color in any adverse conditions;
High wear resistance and strength;
Good bending resistance and resistance to mechanical stress;

Due to its uniform texture, 20 mm porcelain stoneware is easy to process, does not emit radon and is environmentally friendly for humans and the environment.

Scope 2 cm material

Reinforced, or in another way, thick porcelain stoneware with a thickness of 20 mm has a wide applicability. It is used for cladding a street area, organizing private car parks, landscaping country houses, cladding a terrace or veranda, pools and showers, including decorating city and private fountains. High-strength porcelain stoneware 2 cm is used to create an exclusive interior of residential premises and the interior of commercial facilities. This is not the whole range of applicability of porcelain stoneware. With its help, unique facade solutions are created, with the implementation of the most extraordinary architectural and design projects. The high strength of ceramic granite makes it possible to carry out finishing work in industrial premises of industrial facilities, flooring in places with a large flow of people (railway stations, airports, shopping centers).

In the catalog of our online store you can choose a collection of 20 mm porcelain stoneware by price and design, choosing the appropriate texture, pattern and color scheme and significantly save in the future on the strength and performance properties of our products.

Types of road surfaces have already gone beyond asphalt and concrete use. Today, artificial and natural stone is increasingly being used. However, people are reluctant to buy up expensive material, so scientists have come up with an alternative - clinker paving stones. Outwardly, it is no different from ordinary brick, except for the variety of shapes and sizes. The raw material for the manufacture of such products is clay. The technology for the production of clinker slabs consists in kneading and shaping clay, followed by firing.

Scope of paving stones

Clinker boards are used according to their thickness:

Paving stone 52 mm. Highways are paved with it.
Paving stones 50 mm. Designed to reinforce the roadway. It equips squares, squares, areas near shops and other places with increased movement of people.
Paving stones 25 mm thick. These slabs are ideal for decorating sidewalks and paths in personal plots.
Paving stone 20 mm. Tiles of this thickness are also equipped with paths and paths in a private courtyard.
Paving stone 19 mm. This size of paving slabs, like the previous two, can be interchanged.

Acquisition of paving stones and other products at affordable prices

Lemo managers offer a wide selection of paving slabs, curbstones, garden curbs, wall blocks, tactile and facing tiles, as well as 25 mm paving stones at affordable prices. The manufacturing plant in Mytishchi produces products of various thicknesses. Each client orders products of those parameters that are required. Paving stone 5 cm thick can be considered a universal material, since it can pave not only highways, but also sidewalks. An order can be made by leaving a request on the organization's website or by contacting the administration by phone.

Recently, manufacturers have paid great attention to the sorting of clay. If it is mined in one place, then the color of all paving slabs will be the same. To obtain an unusual color, clay is mixed, mined in different places. The less inclusions in the clay, the better it is. If paving stone blocks 25 mm thick are oversaturated with slate, gypsum, chalk and other inclusions, then it will lose its strength and attractive appearance. It's no secret that the choice of clinker tiles is often aesthetic motives.

Paving stone production technology

First comes the preparatory process:

crushing clay;
removal of metal inclusions;
forcing clay through rolls;
adding water and kneading.

Paving stone classification

Experts classify clinker tiles according to purpose, shape and size.

Classification by purpose:

For highways and parking lots. It uses paving stones, up to 70 mm thick.
For the arrangement of sidewalks, slabs with a thickness of 42 mm are sufficient.
Lawn clinker brick. It is 45% dotted with holes designed for grass germination.
Aqua transit. Such paving stones remove rainwater from squares and squares. This is possible due to the numerous holes on the tile.
Tactile pavement. Equipped with textured protrusions. It is placed in places where people with poor vision walk.

Advantages of pavers

Clinker pavers have the following advantages:

Color distribution throughout the product. Thanks to this, the plates retain their original appearance throughout the entire period of operation.
Increased strength. It significantly exceeds the strength of concrete products of the same thickness twice.
Has water repellent properties.

The correct choice of paving stone thickness and professional laying is a guarantee that the entire structure will last for several decades without repair.

Price: from 5 512.28 rubles per sq. meter

Country of origin: Italy

Supplied on order

Tile surface: structured

Wood-look outdoor tiles are indispensable for decorating pools. terraces and verandas. The high-mountain resort in Switzerland, Gray Timber, was inspired to create a particularly colorful shade in the unusual and rich graphite tone of the Axi collection. The surface of the plates imitates roughly processed and aged wood. The collection includes special elements with high technical characteristics in the same smoky hue, with which you can neatly decorate the sides and drains of the pool and the paths to it. Thanks to the rough surface, you can absolutely safely walk along the pool and not be afraid to slip. Axi porcelain stoneware does not fade in the sun and does not lose its qualities over time.

Country of origin: Russia

Delivered within 3-5 days

Tile size: 60x60 cm

Tile surface: anti-slip

The first collection of 20mm thick tiles produced by the Russian factory Atlas Concorde. The series imitates a calm rocky stone. The very name of the Cliff collection translated from English means "cliff", which in itself carries a touch of naturalism and naturalness. The material is suitable for laying on gravel and grass, as shown in the photo. Such laying does not destroy either the lawn or the slab itself and makes it possible to quickly create paths and platforms without time-consuming preparation of the base and quickly dismantle and change them at your discretion. Dry laying outdoors without the use of glue is convenient, affordable and does not require a significant amount of time (no need to wait for the glue to dry) compared to the traditional method.

Price: from 7 501.96 rubles per sq. meter

Country of origin: Italy

In stock

Tile size: 40x120 cm

Tile surface: matt, anti-slip

Blendart porcelain stoneware in the format 40x120 cm, 20 mm thick is recommended for outdoor use with glue-free laying: on gravel, grass, sand and raised floors. The 20 mm tile is offered in five shades of background tiles: White, Dark, Grey, Natural, Mix. Such tiles are distinguished by: frost resistance, refractory properties, durability and easy dismantling. Tiles with a thickness of 20 mm are recommended for decorating street paths and patio areas. The side edges are trimmed.

Price: from 3770 rubles per piece.

Country of origin: Russia

Supplied on order

Porcelain stoneware size: decors 97x51 cm

Porcelain stoneware surface: structured

Among the rich palette of decorative and special elements, the Climb collection features Pavone's special semi-circular inserts, reminiscent of street paving stones. There is no need to deal with the tedious laying of each element separately, since the ready-made Pavone modules have a mesh base and significantly save effort, time and money. The increased thickness of the inserts ensures the universal use of elements: the courtyard of a country house, paths and observation platforms, and even commercial areas with high traffic.

Country of origin: Russia

Supplied on order

Porcelain stoneware surface: structured

The Climb collection is new in 2016, recreating the fine-grained texture of quartz of various rocks. The warm shade of Rope is great for arranging a warm and cozy country courtyard. Warm beige shade will fit perfectly into the interior of any style. The material is distinguished by its special chemical resistance, resistance to high and low temperatures, as well as their differences. Ideal for outdoor home and commercial use. With it, you can veneer the facades of buildings. In addition, special elements are provided for decorating the porch and stairs.

Price: from 3558 rubles per sq. meter

Country of origin: Russia

Supplied on order

Tile size: 60x60 cm

Tile surface: anti-slip

Another shade from the Cliff collection. The surface of the tile imitates limestone, organically fitting into the natural landscape. Due to the fact that the material is dyed over the entire thickness of the biscuit - porcelain stoneware is uniform throughout its thickness, which is an additional plus: with a possible point impact from a sufficient height, the inevitable small chips will be completely invisible. Over time, the surface of the tile will take on the natural charm of natural stone.

Price: from 8 130.48 rubles per sq. meter

Country of origin: Italy

Supplied on order

Tile size: 40.5x81 cm

Tile surface: matte

The novelty of the current 2016, which had sufficient success at the prestigious Cersaie exhibition. The beauty of color and the unusual texture take us back to the past, to a period when wood was used everywhere and was the only facing material. The surface imitates wood that has been aged by time and has undergone significant changes over the years. Increased thickness porcelain stoneware can be used outdoors, it is not afraid of either the vagaries of the weather or the harsh conditions of use. A wide variety of 38 patterns of aged wood allow you to create original and natural canvases. Together with rectified side edges, the material will look unusually solid, which is a definite plus in favor of choosing Universal Oak - a practical material for universal use outside the comfort zone of a home interior. It is worth emphasizing the high anti-slip rating R11, suitable for laying in areas of the porch and stairs, where there is a risk of formation of insidious ice. The series is not afraid of walk-through rooms with intensive foot traffic thanks to PEI V - glaze resistance to deep abrasion.

Country of origin: Italy

Supplied on order

Tile size: 60x60 cm, 45x90 cm

Tile surface: structured

The Axi porcelain stoneware collection is designed according to the latest fashion trends and the most modern technologies of Italian porcelain stoneware production. The surface of the tiles conveys in detail all the beauty and authenticity of wood, the surface of which is treated in a special way to achieve the effect of an aged surface, the so-called brushing. The series is perfect for decorating wet areas in homes and hotels.

Price: from 9 631.48 rubles per sq. meter

Country of origin: Italy

Supplied on order

Tile size: 60x60 cm

Tile surface: structured

Stylish designer porcelain stoneware, perfect for trendy modern interiors and exteriors. The side edges of the tiles are rectified, which is specially designed for the convenience and practicality of the collection when laying in conditions where a combination of ergonomics and aesthetics is required. Hardness on the Mohs scale = 8 determines the strength properties of the material; it can also be used in car parks and urban pedestrian squares, observation platforms. The highest anti-slip coefficient R11 makes it possible to use porcelain stoneware even in technical rooms in factories.

Price: from 9 631.48 rubles per sq. meter

Country of origin: Italy

Supplied on order

Tile size: 60x60 cm, 45x90 cm

Tile surface: structured

Marvel Pro is the best-selling Italian collection of marbled tiles, a comprehensive series that allows you to finish the entire house from the bathroom to the terrace. To match the main background, which can be used in interiors, the collection offers a special series of increased thickness (Lastra 20 mm), it is characterized by high hardness on the Mohs scale of 8, frost resistance, thermal and chemical resistance and anti-slip properties. The surface of outdoor porcelain stoneware reproduces the characteristic structured surface of marble after its mechanical processing - milling. The luxurious shade of Carrara marble - Marvel Pro Statuario Select porcelain stoneware, is relevant for both classic and modern interiors and exteriors.

Country of origin: Italy

Supplied on order

Tile surface: structured

The popular Italian collection of Etic Pro wood effect tiles includes a thick 20 mm wood effect porcelain tile. One of the most interesting colors of the collection - Quercia Antique - is stylized as antique oak, with a slight aging and a hint of exotic Zebrano wood.

Lastra 20 mm extra thick wood look outdoor porcelain tiles embody all the beauty and attractiveness of natural material, practicality and safety with excellent technical characteristics. When used in interiors with high humidity (pools, Wellness and SPA), outside the city and on the street with a high degree of traffic (recreation areas, patios, parking lots), a special surface treatment in combination with an increased thickness will be an indispensable tool for designing natural coatings.

Price: from 9 585.12 rubles per sq. meter

Country of origin: Italy

Supplied on order

Tile size: 60x60 cm, 30x120 cm

Tile surface: structured

Another shade of the Etic Pro series. Imitation of the elite Venetian Oak wood species, one of the most expensive and most popular durable wood species, with an increased thickness of 20 mm. The material is specially designed for use in residential interiors and commercial facilities with special requirements for technical characteristics and performance properties. Warm cozy color palette, slightly sweeping pattern, delicately executed veins of sapwood, surface irregularities like natural oak wood - everything will emphasize the status of the interior with a warm and welcoming atmosphere of sunny Italy.

Price: from 9 585.12 rubles per sq. meter

Country of origin: Italy

Supplied on order

Tile size: 60x60 cm, 30x120 cm

Tile surface: structured

The surface of Etic Pro porcelain stoneware in the shade Noce Hickory imitates the surface of dark hickory walnut, a type of walnut, one of the most valuable woodworking materials, in great detail. The surface of the tile is made similarly to its standard - with the original pattern of annual rings, with small knots and delicate veins with sufficient color variation for absolute naturalness. The photo shows 20mm thick porcelain stoneware with versatile uses: stairs, pool and patio areas, and terraces, outdoor areas and even urban pedestrian areas. The collection has excellent technical characteristics: frost resistance, thermal resistance, including temperature extremes, impact resistance, high anti-slip coefficient and chemical resistance.

The photo shows the glueless laying of porcelain stoneware directly on the grass. This method preserves both the lawn coating and the porcelain stoneware itself. The main condition is the most leveled base for the tiles.

Price: from 9 818.44 rubles per sq. meter

Country of origin: Italy

Supplied on order

Tile size: 60x60 cm, 45x90 cm

Tile surface: anti-slip

New in 2015, imitating natural stone. The technology of high-temperature firing (more than 1220 degrees) and the use of high-quality raw materials made it possible to obtain a material with special strength characteristics that allow it to be used on walls and floors, as well as on the street and for facade cladding, creating projects that are uniform in style. Due to the fact that porcelain stoneware has an anti-slip surface, the tile does not slip when it hits water, which ensures the safety of people's movement.

Price: from 9 585.12 rubles per sq. meter

Country of origin: Italy

Supplied on order

Tile size: 60x60 cm, 45x90 cm

Tile surface: anti-slip

Another shade of Brave tiles. A distinctive feature of the collection is the naturalness of color and texture, authentic imitation of wild stone, unusual ultra-modern formats that allow you to decorate both small chamber spaces and vice versa large spaces, not only residential, but also commercial spaces. Porcelain stoneware with an increased thickness of 20 mm is optimal for laying in difficult conditions for the use of conventional material: terraces, porches and platforms. The material is resistant to temperature extremes, inert to chemicals and safe for everyday use and heavy loads.

Price: from 3500 rubles per sq. meter

Country of origin: Russia

Delivered within 4-5 days

Tile size: 60x60 cm

Tile surface: anti-slip

The X2 series is the first 20 mm thick porcelain stoneware collection produced in Russia. The most natural and realistic texture of layered rock - slate, natural color transitions and accurate coloristic imitation of natural stone - will harmoniously complement the design of any country type and areas with special requirements for safety and technical characteristics of the material used.

Price: from 3610 rubles per sq. meter

Country of origin: Russia

Delivered within 4-5 days

Tile size: 60x60 cm

Tile surface: matte

Beautiful stone effect porcelain stoneware, new in 2016. Can be used in all outdoor conditions, as well as in garages, commercial centers, crossings and other areas of human traffic. Also available in regular thickness suitable for indoor applications. In this way, you can design a common space - a house - a balcony - a terrace, in the same style.

Price: from rubles per sq. meter

Country of origin: Russia

Delivered within 4-5 days

Tile size: 60x60 cm

Tile surface: matte

This porcelain tile is perfect for public areas with high traffic: galleries, museums, shopping malls, car showrooms, etc. Luxurious imitation of Italian quartz with expressive details: stone veins, coarse natural quartz grain, delicate smoky and natural universal shades. The specialists of the Italon domestic factories, being in constant search for new ideas and inspiration, offered an alternative to Italian collections at an affordable price, creating a series that is in no way inferior in quality to its imported counterparts.

The series includes a range of special elements such as edging and steps. The final rectification of the side edges allows the most monolithic design of the space with a minimum seam, which will certainly add an additional plus to everyday practicality and ease of cleaning.

Price: from 3500 rubles per sq. meter

Country of origin: Russia

Delivered within 4-5 days

Tile size: 60x60 cm

Tile surface: anti-slip

This modern material, new for 2016, is available in 2 versions - regular thickness and increased thickness of 20 mm. The optimal solution for complex architectural projects where the unity of style is important.

Price: from 3500 rubles per sq. meter

Country of origin: Russia

Delivered within 4-5 days

Tile size: 60x60 cm

Tile surface: anti-slip

A completely new material for Russia and technologically optimal for difficult conditions. Previously, only Italians produced thick wood-like porcelain stoneware, but since 2016, the production of thick wood-like porcelain stoneware has begun in our country.

An excellent and economical option compared to imported tiles for decorating design spaces. Borrowed from nature, the beauty of natural wood with natural shapes and soft sandy tones fits perfectly not only in home interiors and commercial spaces, but also in the natural landscape and man-made exterior.

Price: from 7 799.12 rubles per sq. meter

Country of origin: Spain

In stock

Tile size: 50x100 cm

Tile surface: anti-slip

Cotto Outdoor is the street format of the new 2018 collection. The design team of Aparici Ceramicas presented a heavy-duty material at Cevisama 2018 for landscape design. The tile was specially developed for arranging traditional Spanish patios in the suburban segment. In addition, the tile includes a set of special elements:

Grid slabs with holes for water drainage near the pools and the foundation of the house;
Steps steps of the same thickness 20 mm with anti-slip notches.

Price: from 7 561.24 rubles per sq. meter

Country of origin: Spain

In stock

Porcelain stoneware size: 49.75x99.55 cm

Porcelain stoneware surface: anti-slip

Tex - the new collection of 2017 was shown at the autumn Cersaie engineering and construction exhibition in Bologna. It features not only an exquisite design for textiles, but also provides for use in the most difficult conditions. For this, a special Outdoor series with an increased thickness of 20 mm is offered. The surface of porcelain stoneware can be plain and printed with patterns of various Pattern weaves in 16 variants. The series has a high anti-slip coefficient R11. It is perfect for decorating the blind area around the house, outdoor recreation areas, paths and terraces, swimming pools and parking lots that require special hardness and abrasion resistance. Additionally, you can order elements with slots for water drains and steps with anti-slip notches.

Buy tiles

Price: from rubles per

Country of origin: Russia

Supplied on order

Porcelain stoneware surface: structured

The Materia X2 collection of increased thickness is presented in two shades of the Magnesio and Titanio background tiles. Porcelain stoneware is specially designed as a "street" continuation of classic thickness tiles. The special anti-slip surface prevents the formation of frost and withstands significant loads. Blocks inserts imitate paving stones and, like X2 60x60 cm tiles, have excellent technical characteristics: frost resistance, impact resistance and chemical resistance. For the design of areas near the pool, special special elements are provided: gratings for water drainage, pool sides and various steps with anti-slip coating.

Buy tiles

Price: from rubles per sq. meter

Country of origin: Spain

Supplied on order

Tile size: 49.75x99.55cm

Tile surface: matte

The new porcelain stoneware collection from the last Italian exhibition Cersaie 2016. The special Camper Outdoor 2 CM series with increased thickness is designed to continue laying porcelain stoneware outdoors and in areas that are difficult to use with conventional porcelain stoneware: outdoor pool area, paths, shopping areas, cafes, restaurants, car dealerships and high traffic shops. As special elements in the Outdoor series, steps with anti-slip notches and elements for arranging water flows near swimming pools and draining water near the blind area of house building are offered. The Camper collection is a complete project that includes background tiles and decors in classic thicknesses for everyday use in home interiors of apartments and the countryside.

Buy tiles

Price: from rubles per sq. meter

Country of origin: Spain

Supplied on order

Tile size: 49.75x99.55cm

Tile surface: matte

Another novelty from the leader in the production of designer tiles and porcelain stoneware Aparici - the Recover collection. The series includes Outdoor 2 CM tiles with a special thickness of 20 mm. The collection imitates the currently popular poured concrete - a monolithic effect with a light silky finish will not leave anyone indifferent. A feature of the collection is a slight vintage note, manifested by small dark areas along the edges of the tiles. The side edges of the collection are rectified, which allows you to create monolithic spaces. The 20 mm series is designed for use in areas with special safety and performance requirements: car parks, patio areas, plazas, home interior walkways and commercial areas, bar and restaurant terraces. The collection can be laid like a raised floor on special supports, under which cables, wiring and control units can be placed. As special elements in the Recover collection, overhead steps with anti-slip notches and special elements Recover Outdoor 2 CM Grid 24.75x99.55 cm are provided for decorating water drains near the pool and house facades.

Buy tiles

Price: from rubles per sq. meter

Country of origin: Spain

Supplied on order

Tile size: 49.75x99.55cm

Tile surface: matte

New porcelain stoneware collection from Cersaie 2016 with an increased thickness of 20 mm. The plate is made in a large size, optimal for laying on the street. The surface of the tile imitates the surface of primed concrete in three shades: whitish Ivory, smoky Gray and earthy Vison. Increased thickness porcelain stoneware has higher technical characteristics compared to conventional porcelain stoneware. It has a wider range of uses and styling methods: traditional and glueless. The glueless method includes direct laying on leveled gravel, sand and lawn grass, in the form of a raised floor. As special elements, the collection includes steps with anti-slip notches and special Brave Outdoor 2 CM Grid elements with an anti-slip coating to drain excess water with special slots. Such elements have high bending strength, they can be walked on, they are frost-resistant and can be outdoors all year round, they are installed without the use of glue.

Categories

Popular