Fasteners for tools in the garage. How to equip a workshop - important rules and recommendations. Video: An example of a self-made ergonomic tool storage system in the workshop

Practical storage systems for the garage or workshop.
For many, the garage is not only a place to store a car, but also a real car, locksmith and carpentry workshop. Therefore, it is important that everything is always at hand and in the right place. But sometimes it is so difficult to understand the variety of screwdrivers, pliers, scissors, drills and other utensils that are stored in the "male Eden". In this review, simple yet effective ideas will help you create almost perfect storage systems in your garage.

1. Magnetic tape

Magnetic tape for storing small metal parts.

Magnetic tape pasted on the wall in the garage can be used to store drills, scissors, bolts, nuts and other small metal parts. Such a magnetic holder is very convenient to use and will help prevent the loss of small but important spare parts.

2. Plastic containers

Rack made of plastic containers.

From large plastic containers and blocks of wood, you can build a large rack for storing tools, wires, spare parts and any other things. The organization of such a rack will allow you to put things in order and significantly save space in the workshop or garage.

3. Roof rails

Rails for trash bags and paper towels.

On one of the free walls of the garage, you can place several small roof rails, on which it will be convenient to place rolls of garbage bags, paper towels, sandpaper, adhesive tape, coils of rope and much more.

4. Furniture brackets

Brackets for furniture storage.

Many summer residents use the garage to store folding outdoor furniture. So that it does not stand in the corners and does not take up much space, make a vertical rack for it with wooden or metal brackets and screw it to one of the free walls.

5. Jars

Storage of nails, bolts, screws and other small things.

Bolts, nuts, nails, screws, screws and other little things do not take up much space, but it is extremely inconvenient to store them mixed. Putting things in order will help jars with lids screwed to the bottom of a wall cabinet or under the desktop top.

6. Grid under the ceiling

Lattice for storage of pipes and plinths.

A plastic grate screwed into the corner of the garage under the ceiling is ideal for storing leftover water pipes, skirting boards, profiles and other long items. Such a storage system will help to significantly save space in the garage and prevent possible breakage of fragile building materials.

7. Organizer for screwdrivers

Wooden organizer for screwdrivers.

A small, practical screwdriver organizer that any man can make by simply drilling the right number of small holes in a block of wood. Such a product can be hung on one of the walls of the garage or workshop to keep all the screwdrivers in one place.

8. Vertical storage systems

Vertical panels for storage.

Several perforated metal or plywood panels under a table or in a cabinet provide an ergonomic and comfortable place to vertically store small hand tools.

9. Plastic pipes

PVC pipe storage systems.

The remains of PVC pipes of different diameters can be used to create a variety of storage systems. For example, pieces of wide pipes screwed to the bottom of the cabinet are suitable for storing a screwdriver, drill and other tools of this type. From pieces of PVC pipes of medium diameter, you can make cells for storing various sprays, foam, paint tubes and other containers.

10. Tassels

Hanging brush storage.

It is very convenient to store paint brushes and spatulas suspended on a thin wire or on a thin steel rod.

11. Rack for garden tools

Wooden rack for garden tools.

So that garden tools do not take up a good third of the garage space, store them on a special rack screwed to one of the walls. Such a rack can be made with your own hands from wood bars, a wooden pallet or pieces of plastic pipes.

12. Multifunctional rack

Pallet rack with shelves.

A wooden pallet, complemented by shelves made of pieces of wooden slats, will become a functional component of the garage and will help to place a huge amount of hand tools and small ones in one place.

13. Rod holder

Rod storage.

A regular wire rack can be used to create a handy rod holder. Such a storage system can be fixed under the ceiling so that it does not take up space below and does not get underfoot in the autumn-winter season.

14. Pegboard

Garage space is often combined with a workshop. The tool storage system in the garage should be thoughtful. Finished designs GOSNITI are considered optimal.

A home craftsman who wants to save money will need improvised materials. Complex mechanisms equipped with movable elements, it is forbidden just store.

To make the correct placement of the tool in the garage and clean up, there are the following options storage organization:

• on shelves;
• on the shelves;
• in cabinets;
• on stands;
• on shields.

There are shelves of various modifications:

• hinged;
• closed;
• stationary;
• mobile.

Various materials are used for their manufacture, such as metal or wood. Small parts require hanging shelves. They are usually located at the level of the chin of the owner of the garage. If the inventory has to use often, would be better for him. open structures, and in the closed store unnecessary things.

See how you can make an interesting do-it-yourself garage tool storage option:

The direct competitors of mobile shelves are movable boxes. The device has specialized containers for tools.

Factory tool racks in the garage are made in accordance with GOST. These ergonomic designs are easy to make with your own hands. To store large aggregates or tires, you will need large shelving.

If you want to make a tool cabinet in the garage with your own hands, then there should be special drawers or bags. This storage allows to avoid dust ingress. You can also rationally use side walls. With the help of special tool mounts in the garage, a place is equipped for fixing the planer. Can be placed on doors rubber hose holders.

A skilled craftsman will make a do-it-yourself tool stand in the garage. The material for its manufacture is chipboard sheet. Additionally used as tool holders canned metal cans.

How to store tools in the garage?

A convenient place to store shield, or storage panel, or simply tool board in the garage. Screwdrivers, wrenches, pliers are fixed on them. To make a shield for a tool in the garage with your own hands, use an array of boards and strong hooks. The configuration depends on the personal preferences of the master.

How to place the tool in the garage on the wall - photo:

As you can see in the photo, storing a tool in a garage with your own hands is not at all difficult to organize. All you need is desire and a little patience.

Storage of keys with tools on the wall of the garage

How to fix the tool on the wall in the garage? The optimal tool storage system in the garage involves the use of the entire area of ​​the wall.

1. After installing the horizontal guides, they are hung on them. section-shelves. Small things like nails and screws can be put in plastic jars that have had mayonnaise or horseradish. Their lids are screwed to the shelves.
2. Can be made for nuts, washers, scissors and keys stand in the garage by hand. Special loops make wire. Washers with nuts are strung on the split ends, and the dimensions of the fittings are indicated on cardboard labels. Scissors with keys are hung on metal hooks.
3. For drills, cutters and storing keys in the garage, attach to the wall foam pad. They are firmly fixed in the elastic material and can be easily removed from it if necessary.
4. Another method of attaching tools in the garage is disposable plastic plates. If you cut them into two equal parts, you get blanks. Then they are attached to the wall with self-tapping screws. The resulting pockets are used to store saw blades or grinding wheels.
5. For storage of clamps it is recommended to use rectangular plywood box. It is attached to the wall and after that the handles of the clamps are placed in it.
6. Sturdy wall mounts are designed to store bikes. Their base must be metal.
7. In order not to lose a screwdriver of the right size, they are used for storage magnetic holder. Then they are always visible.
8. From hooks with paper clips, the craftsman will quickly make fixture for cloths intended for tape plates.

A convenient option for a panel for storing tools in the garage, which does not take up much space:

As soon as the owner of the house decides that it's time to hang up the flower shelf, which the wife so insistently reminds of for the second month, it turns out that the necessary tools have disappeared somewhere. The situation is familiar, because usually hand tools, all these keys, hammers, screwdrivers, are stored so that they do not catch the eye. Of course, we don’t use tools every day, but the storage system must be organized correctly so that we don’t rush to look for, for example, a key for 12.

Storage options

Let's decide right away that we will talk about a workshop that can be equipped in a garage, a separate shed, a summer kitchen, on a fairly spacious loggia or balcony. There are usually not many tools in the apartment, and the available screwdrivers, hammer and pliers can be folded into a specially dedicated box or bag that can take place on the mezzanine or in the hallway.

If there are noticeably more hand tools, they need their own separate corner, in which you have to put things in order. The main condition is that the storage place for tools should be dry, because metal parts do not like moisture.

There are many advantages to a well-designed storage system. You will always know exactly what and where lies, you don’t have to look for anything. If the tools are always in their place, you will remember in time that you gave your neighbor a nail puller a month ago, which was needed literally for an hour. In addition, well-placed tools take up less space in the workshop, freeing up space for work.

First of all, you should decide whether you will buy ready-made shelves for tools, a metal mobile cabinet with drawers, or equip a workshop with your own hands from scratch. We note right away that ready-made storage systems for hand tools are not always 100% suitable, often they have to be redone for themselves.

Consider a few ideas for self-organizing the storage of hand tools in the workshop.

1. First of all, you should take care of the little things: nails, screws, bolts, which tend to get lost and scattered throughout the room. For their storage, you can adapt ordinary plastic bottles with cut necks - you will immediately see what is where. Small plastic boxes are also suitable, which are better to sign, noting that here, for example, there are nails of such and such a size. It is convenient to arrange such containers for storing small things on a shelf above the desktop so as not to clutter it up. But glass jars should not be used in the workshop. There are too many heavy metal objects that can accidentally touch such a fragile container.

2. Magnet. Real masters usually have a large magnet on their desktop, to which metal small tools successfully cling. Now there are also special magnetic surfaces, holders, on which you can conveniently and easily store many tools and parts.

3. Plywood shield - the choice of the masters of the old school. From pieces of bars on such a shield, you can create a whole storage system that will not take up much space and will allow you to place almost all hand tools. The cost of such storage places is minimal, and everything will be done according to the needs of the master.

4. You can also buy ready-made metal sheet with holes for tool holders. However, you can do this yourself. On ordinary nails or self-tapping screws, saws, keys, and other tools are hung in the right order, in the handles of which there are special holes.

5. For screwdrivers, it is convenient to allocate a separate storage, for example, a regular school stand for pencils and pens.

6. Plastic boxes with compartments, which are usually used in the kitchen for forks and spoons, can also be adapted for small hand tools.

7. If you don’t really want to build shields and make shelves, you can transfer an old sideboard or sideboard to the garage workshop. It has a lot of shelves and drawers, where a lot of tools will fit. The main thing is to lay everything out yourself in order to know exactly where the garden tool is stored, and where the carpentry tool is.

8. For drills and nozzles of a certain size, it is better to buy a ready-made lodgement - an insert with tools. Or drill holes in a wooden beam where the drills will fit. And sign - 3, 4.5, 9 and so on, in order to immediately know the desired size of the cutting tool.

9. When arranging storage areas in the workshop, care should be taken to ensure safety, especially if small children can get into the room. In this case, it is better to hang piercing and cutting tools on the wall higher, and chemical liquids to be securely closed in a locker with lockable doors.

10. For garden hand tools, a stand-alone rack with holders for long handles of shovels and choppers is perfect. Of course, you can just lean them against the wall, but remember the proverb about the same rake?

We state that organizing a workshop is not so difficult, there are a lot of simple ideas. Just tune in to the fact that once you have to tinker longer in the garage, make an effort, but then in your workshop there will always be a strict order and there will definitely be no problems finding a “cross” screwdriver.

We will send the material to you by e-mail

For the rational use of space, communications and do-it-yourself garage accessories from improvised materials are used. It is necessary to use the walls, the underground level in the process, place it indoors, organize normal lighting.

Homemade garage fixtures

For comfortable operation of the premises intended for storing cars, you should follow certain recommendations:

Depending on the dimensions of the building, the area occupied by equipment, fixtures, communications should not be more than 10 - 20% of the dimensions of the garage floor.

Storage areas, racks, workbenches

In 80% of cases, do-it-yourself garage fixtures are built to store accessories, tools, and car equipment. It should be noted that the most bulky parts of the car are sets of winter / summer tires, depending on the season.

The main nuances of these structures are:

The width of the pit should allow the driver to drive into it without lighting.

Lighting and ventilation

In garages, parallel lighting circuits are more often used. One lamp allows you to use a specific area, several devices are turned on during a major repair, a visit to the cellar. The minimum power consumption is provided. Daylight devices have a large resource.

Cars use poisonous, harmful fuels and lubricants, so do-it-yourself garage ventilation devices are becoming relevant, allowing you to create air exchange. The inflow is organized from below:

• garage - vents in masonry, protected by bars;
• cellar - a pipe from the garage or from the street.

The hood is mounted under the ceiling of the cellar, the roof of the garage or has the form of air vents in the main walls at the highest points.

Related article:

Other Helpful Ideas

Useful do-it-yourself garage accessories can be made from used utensils, inventory, materials left after construction. For example, by gluing the lids of plastic jars horizontally / vertically, the owner gets a convenient transparent dish for equipment or hardware, which is always at hand.

Homemade machines

From the power tool, you can also assemble fixtures for the garage:

• drilling - a drill fixed with clamps in a fixture that moves with a gear along a rail;

• cutting - clamped in a similar way with an angle grinder with a tool for metal or wood;

The advantage of the machines is more precise positioning of the tooling relative to the workpiece. The equipment turns out to be collapsible, the drill and angle grinder can be removed mono, used for its intended purpose.

Related article:

Hydropress

The simplest design is obtained from a car hydraulic jack. For pressing out / pressing in bearings, pressing / compressing parts, you will need to build a frame and a removable movable stop. The frame consists of 4 channels welded to each other. At the top, the structure is reinforced with stiffening ribs (kerchiefs), at the bottom, transverse corners are added to give the frame stability.

The stop is pulled up in the normal position to the upper crossbar of the frame by powerful springs. A hydraulic jack is installed between them, as necessary pressing the stop to the lower crossbar of the frame. The force of the press is regulated by a jack, the dimensions of the working area are selected depending on the size of the workpieces.

And finally, a few more examples of useful things for the garage.

The article discusses the most convenient and practical do-it-yourself garage accessories that can improve the comfort of using this room. Here are detailed recommendations for the development and creation of structures designed for convenient storage of tools and automotive parts, tips for making furniture, as well as arranging a lighting and heating system.

The garage is designed not only for storage, but also for servicing the car. For this reason, this room should be spacious, clean, comfortable and well-equipped.

To achieve all this, it is enough to take into account the basic requirements for the organization of space:

1. The presence of shelves for tires and storage of tools significantly saves free space and allows you to optimize space.
2. The quality of lighting is of great importance, since it affects not only productivity, but also the quality of minor repairs.
3. The construction of a garage workbench, machine tools, a viewing hole and other devices expand the range of opportunities for a car owner in relation to vehicle repair and service.

Helpful advice! All these elements should not occupy a space exceeding 10-20% of the garage area.

Do-it-yourself shelving options in the garage: photos and tips for arranging storage spaces

About 80% of the shelves in the garage are built with their own hands to store garage accessories, namely:

• tools and accessories;
• component parts for the car;
• accessories.

Often in the photo of the shelves in the garage with their own hands, they are combined with a rack, which can also be made independently. Most often, the rack is considered as the main place for storing tools. After its installation, the remaining space is filled with comfortable and roomy shelves.

Be sure to allocate a place where work clothes will be stored. It is not necessary to occupy a large area, you can get by with one shelf or even a hook (depending on your needs).

A garage is a place where hazardous and flammable substances are stored. These include oil, gasoline, solvents, paints, polishes. For them, it is necessary to provide a separate cabinet, hang a fire extinguisher and install a sand tank.

To protect against contamination during storage of wheels mounted on tire brackets, it is worth purchasing large bags or specialized covers to prevent dust from entering.

Brackets and shelves for wheels in the garage: design features

The most bulky vehicle spare parts include sets of tires, which can be winter or summer. When winter tires are used, summer tires are usually stored in the garage and vice versa. Therefore, you should organize shelves for storing tires or brackets.

The bracket design looks like this:

1. Two triangular frames made on the basis of the corners. Jumpers made of any durable metal are installed between these frames.
2. The triangular parts of the structure are fixed on the wall in a pre-selected location. Wheels should be installed perpendicular to the supporting element of the stand. In this case, the tires should fall slightly between the jumpers, thus fixing on the shelf due to their own weight.

Helpful advice! Do-it-yourself wheel shelves in the garage are recommended to be placed as close to the ceiling as possible at the optimum height. Thanks to this, car tires will not occupy usable space in the garage.

For compact storage of wheels, a whole rack in the form of four wide shelves can be used. It is suitable for placing wheels with discs that can be placed one above the other in a horizontal position. The design can be made angular and raised to the wall.

• wooden beam;
• boards;
• chipboard sheets.

Installing tire brackets is the most efficient way to store wheels. Greater space savings can be achieved by hanging the rubber from the ceiling base along the garage wall. This option is possible if the room has a large height and reinforced concrete floors in the form of slabs on the ceiling. They will be used as the basis for screwing in the dowels.

Tool storage: interesting DIY garage ideas

To organize a convenient area for placing things, you can independently make a home-made and very roomy rack or shelves. Of course, you can find hundreds of ready-made models in stores, however, making a shelf in the garage with your own hands is much cheaper than buying a similar product on the market.

Same issue with shelving. Taking up the independent production of storage space for tools, you can not only organize a convenient and practical rack, but also harmoniously fit it into the garage space.

Helpful advice! The minimum load that the structure must withstand is 150 kg or more. In this case, the maximum load limit per section is 500 kg.

Rules for the manufacture of wood products:

1. It is better to use hard wood, such as beech, oak, hornbeam.
2. Before assembly, wood treatment with antiseptic agents is required.
3. Frame parts must be carefully sanded so that the operation of the rack is safe.
4. For the manufacture of shelves, it is recommended to use chipboard or plywood sheets, OSB. DVL plates with a thickness of at least 4 mm are also suitable.

The thickness of the material is determined by the loads that will subsequently act on the rack.

Recommendations for making tool shelves in the garage with your own hands

Shelves are installed in cases where the garage does not allow you to put a rack. It is better if there are several designs.

The scheme for creating shelves for tools:

1. Plan the placement of shelves, determine their size and markup.
2. Prepare material in the form of boards and fasteners.
3. Using a perforator, make holes in the wall, install dowels with hooks in them, which will provide enhanced fixation.
4. Fasten hangers equipped with lugs on the boards. For metal hangers, it is recommended to use self-tapping screws or ordinary nails.
5. Fix the finished products using the building level, otherwise the tool may fall from the shelves, which makes operation unsafe.

Helpful advice! When making shelves, it is better to give preference to several short designs, since one long product can break under the weight of the tool.

At the final stage, you can make a decorative finish of products (paint or special film).

The technology of creating a rack for tools in the garage

To create a rack with your own hands, you will need boards 9 and 19 cm wide. The size of the structure can be adjusted.

Step technology:

1. A 9 cm wide element is cut into several pieces 18 cm, 27.5 cm and 30 cm long. The resulting parts will be spacers.
2. A board with a width of 19 cm should be cut into segments 36 cm long. Shelves will be made from these parts.
3. On the board, which will become the base of the product, it is necessary to mark in those places where there will be spacers. It is recommended to indent on each side by 2.5 cm.
4. The upper spacer is glued, then the upper shelf, which already has a spacer, is nailed to it. Other parts are mounted in the same way. Installation of the lower spacer is carried out at the end.
5. The structure should be turned over and the struts should be coupled with screws together with the base of the product.
6. The surface is carefully cleaned with sandpaper. After that, the product must be covered with two layers of oil-based varnish or another type of finish.
7. The structure is fixed to the wall with anchor screws. Fixation should be done both under the top and under the bottom shelf.

Helpful advice! To strengthen the product, it is necessary to install wood bars between the sections. They will allow you to evenly distribute the load on the rack.

Organization of the lighting and heating system in the garage

In order for the operation of the garage to be comfortable, the lighting, ventilation and heating system should be properly organized in the room. Since cars are closely associated with the use of toxic and harmful substances, the problem of ventilation in a confined space is particularly acute. For a garage, products are suitable for brickwork. They are equipped with gratings.

Factors affecting the level of illumination:

• garage area, its height;
• the number and nature of the placement of work areas (the size of the workbench for the garage, the viewing hole, the number of machines);
• type of decoration on the walls, its colors;
• indicator of the specific power of the network per 1 m²;
• type of lamps for the garage.

Various types of heating can be used to maintain the optimum temperature:

• gas;
• based on used oil;
• air;
• electric (infrared heater for the garage);
• furnace;
• water;

There are many alternative ways to independently organize a heating system.

Features of halogen, fluorescent and LED garage lights

Technical indicators of halogen lamps are in many ways similar to incandescent lamps, however, their bulb is filled with bromine vapor, so the products emit more light. The advantages of such lamps include long service life - 4 thousand hours.

Helpful advice! Products must be placed in plafonds. It is also worth thinking about stabilization aimed at protecting against power surges. It is not recommended to touch such lamps with your hands (the expiration date is reduced).

Fluorescent lamps are filled with inert gases inside. From the inside, the flasks are covered with a specialized composition that emits light in ultraviolet under the influence of an arc-type discharge. Recommended models include products with IP-65 class, protected from moisture and dust particles.

Installation of LED lighting in the garage comes with the highest costs. Nevertheless, they pay off with 50 thousand working hours. In terms of efficiency, LEDs are 50% more profitable than fluorescent lamps. At the same time, they do not contain harmful components in their composition, and the light does not have an aggressive effect on the eyes, so there is no need to buy additional shades.

Installation of lighting in the garage: how to make a calculation

To calculate the power of conventional lamps, you can use the formula:

P = S x W/N.

Explanation of values:

• P is the total required power, W / m².
• W is the power of one lamp, W.
• N is the number of lamps (luminaires), pcs.
• S is the area of ​​the room, m².

For halogen and LED lamps, the optimal indicator is 16-20 W / m². This value is suitable for rooms where the ceiling height is no more than 2.5 m. In garages with 3-meter ceilings, this figure should be multiplied by 1.5.

The calculation is influenced by the interior decoration of the walls of the room. In dark garages, lighting should be brighter.

Light Reflection Level:

To illuminate the viewing hole in the garage, it is recommended to use low-power lamps with halogen or LED lamps, since moisture accumulating in this place can provoke an electric shock. Devices are mounted on the sides in pre-made recesses.

Helpful advice! So that an accidentally dropped tool does not break the lamp, the design of the lamps can be made retractable. When the pit is not in use, the appliances are securely hidden in the recesses.

Do-it-yourself autonomous lighting system in the garage

There are a number of principles on the basis of which an autonomous lighting system is implemented:

1. LED strips are mounted inside the ceiling lamps (300 diodes per element).
2. The output of the switch is carried out strictly on the shield.
3. A suspended ceiling system is used for electrical wiring.
4. The wires are powered by a battery connected to the network through a charger.

The multi-level lighting system for the garage is considered the most optimal. It involves the installation of a large lamp in the middle of the room and the installation of small lamps in work areas.

Height calculation for a multi-level system:

Lights are installed correctly if the machine does not cast a shadow on either side.

How to choose a heater for the garage

Garage heating is carried out using small portable devices that can warm up the room in a short time and further maintain the optimum temperature.

Thinking about which heaters are best for the garage, many mistakenly believe that a home-made device can be made exclusively from expensive components and requires a significant investment of time. For this reason, garage owners refuse this venture.

In fact, to make a garage heater with your own hands, it is enough to limit yourself to budget materials, for example, thermal film. The scheme for creating such a device is very simple and involves the use of the following materials and tools:

• a kit designed to assemble the heater;
• wire, equipped with a plug;
• paper laminate (the area of ​​one element is 1 m²);
• graphite powder;
• epoxy adhesive.

Helpful advice! Be sure to have a multimeter with you. When assembling the device, this tool is useless, but it will be needed to check for performance.

Thermal, or - a common heating option in the garage

Recommendations for assembling a homemade heater for the garage

Step by step instructions on how to make a heater for the garage:

1. A mixture of glue and graphite powder is made. The more powder in the composition, the stronger the heating of the device will be. The average temperature ranges from 60-65°C.
2. Plastic sheets on the rough side are covered with a mixture of glue and graphite, which is applied in zigzag strokes, after which they are fastened with their faces and fixed with a frame made on the basis of wooden slats.
3. The terminals are fixed to the graphite conductors and the structure is dried. Drying must be complete, otherwise moisture will ruin the device.

After the heater has dried, a resistance test should be performed. A garage heater is considered safe only after this test. Until this moment, it is strictly forbidden to connect the device to the mains.

Security restrictions:

1. It is not recommended to leave the switched on device unattended or leave it near children.
2. It is forbidden to use equipment that can provoke a fire.
3. Flammable substances and materials must not be placed near the device.

Making useful DIY garage fixtures

To carry out repair and service work, you will need to build a viewing hole in the garage with your own hands, the dimensions of which will correspond to the dimensions of the car, as well as a workbench for convenient work, plus equip the room with machines.

The basic set of tools and materials for creating a homemade workbench for the garage includes:

• boards and wooden bars;
• fasteners and ties;
• planer and other tools for woodworking;
• varnishing and carpentry adhesives;
• sandpaper and varnish.

An example of placing useful devices in the garage: 1 - with manual machines, 2 - racks and cabinets, 3 - a table for various repairs, 4 - a shelf for storing tires, 5 - an inspection hole

Do-it-yourself workbench manufacturing technology in the garage: photos, drawings

The workbench consists of a tabletop and underframe, as well as several clamping devices. The height of the workbench in the garage should be selected taking into account your own height. You can take as a guide the height of the kitchen table in the house, at which it is convenient to work. Be sure to draw up drawings to create.

Helpful advice! Ready-made drawings of a workbench for a garage, which can be found on the Internet, are suitable as a basis for self-production of the structure. If desired, it can be customized to your needs.

Arrangement of the garage: how to make a workbench indoors:

The final processing involves the impregnation of the finished product with drying oil and opening with varnish.

Recommendations for creating a viewing hole in the garage with your own hands

There are no specific sizes of a viewing hole in the garage. The dimensions of the car are taken as the basis.

How to make a viewing hole in the garage with optimal parameters:

1. The width is chosen so that there is enough space inside to work. The size is limited by the distance at which the wheels of the car are planted. Each wheel needs a small area to perform maneuvers. The average width of the pit is 0.8 m.
2. The length of the pit is limited by the length of the machine. To this figure should be added 1 m.
3. The height of the garage owner is used to calculate the depth. Another 10-15 cm is added to it.

How to make a viewing hole in the garage using different materials:

The pit breaks out taking into account the optimal width of the pit, the material chosen for the walls, as well as the thickness of the waterproofing layer. Stages of creating a hole:

• markup;
• construction of a pit;
• arrangement of the pit;
• building walls;
• lighting pad.

For waterproofing walls, a specialized hydrophobic impregnation is used.

Helpful advice! With the help of formwork, it is possible to make reinforced recesses in the walls of the pit for placing tools and lighting fixtures.

Making a press for a garage with your own hands

To create a press, a frame measuring 178x80 cm should be made from 4 pieces of metal pipes. These elements are connected by welding. In the work it is recommended to be guided by drawings, pre-selected or compiled. After that you need to install:

• retainer;
• removable stop;
• bottle jack (hydraulic).

You can use video materials to consider the detailed technology for creating useful garage accessories with your own hands. Such visual recommendations help you navigate the dimensions, master step-by-step instructions and imagine what appearance the finished structure should have.

Manufacturing scheme: 1 - upper power platform, 2 - nuts, 3 - lower platform, 4 - studs with a diameter of 30 mm, 5 - lower thread of the studs, 6 - bottle-type hydraulic jack; 7 - base 20 mm thick

You can do it yourself. The list of useful devices does not end there. It can always be supplemented with any interesting ideas. The main thing is that the garage fully meets personal requirements in terms of comfort and convenience.