German plastic pvc windows. Technology from West Germany. Profiles only of the highest class "a"

In order to understand which profile of plastic windows is better to choose, you need to study a large amount of informational texts, study a lot of professional and amateur reviews and practically conduct your own investigation on this matter. We did it for you and offer to sort out all issues related to German windows together.

What is the best profile of plastic windows?

Inside any profile there is a metal insert, consisting of galvanized steel, air chambers are produced by internal plastic partitions, which ensure heat preservation. The question will be logical: what is the difference between manufacturers who use the same plastic (polyvinyl chloride), and steel remains steel? This suggests the conclusion that the profile of any manufacturer of the same quality should be. Is it so? How then to determine the best of analogues by definition?

Window profile: selection criteria

Producing country . All countries that process the profile indicate its origin. And often in the descriptive part you can see the word "German". Here it is necessary to clarify what exactly is meant by this name, since by this the sellers justify the considerable price of the finished product. A huge part of this profile is produced by Russia using German technology. At the same time, labor and energy resources are used cheaper, which means that the cost of the product should differ from the profile produced in Germany.

Peculiarities quality of thermal insulation chambers is one of the most important criteria. It is generally accepted that the best thermal insulation in windows with a large number of cameras. But it should be borne in mind that too many cameras can lead to such a moment: the coefficient of thermal conductivity may increase due to the plastic of the partitions, which acts as a cooling radiator. In this regard, pay attention to the following important criterion.

Profile width. If you choose a profile for a living room, we recommend that you do not save on this characteristic. It is quite simple here: the wider the profile, the warmer. Nevertheless, it should be noted that a small-chamber wide profile can easily be deformed due to a lack of stiffeners. It all depends on the room where you plan to put the window.

Number of double-glazed window chambers . We recommend making your choice in favor of two-chamber, even for glazing balconies, and remember, the miser pays twice. In general, the choice of double-glazed windows is the prerogative of a separate article.

Characteristics of the reinforcing steel insert . It happens with a solid or open circuit. In the absence of restrictions on strength, we recommend choosing an open one, it is still warmer.

By the way, on the world market of this industry, the company Windows Velt has proven itself well, which, according to positive customer reviews, occupies a leading position. On their website, you can not only pick up high-quality German windows, but also use the installation service.

As you already understood, it is German profiles that cause the greatest confidence among specialists. They are best suited to our climatic conditions. In this regard, some experts recommend being wary of products manufactured in southern countries, and this, despite the fact that their quality is quite high, but the properties are most likely not well adapted to the climate of our country.

So, having delved a little into the very essence of window production, let's determine the best manufacturers of German windows.

REHAU

The world saw the first window profiles of this brand more than 50 years ago. Window systems of this brand have excellent thermal insulation properties. They are characterized by an incredible tight fit of the frames, which provides good heat and sound insulation. In addition, windows from Rehau are equipped with an anti-burglary system: the glass is impact-resistant, the window cannot be opened from the street, the profile is reinforced. If we mention the appearance of the window systems of this German manufacturer, then aesthetics has no boundaries.

Advantages:

• soundproofing. These window structures meet international standards for sound insulation;
• increased fire resistance. This product is made of flame retardant materials and has a unique self-extinguishing technology;
• thermal insulation. This window profile retains heat well in the room, since it is multi-chamber;
• simple care. Due to the smoothness of the surface and antistatic treatment, dirt does not accumulate on the surface of the windows.

KBE

This company was founded back in 1980 in Berlin. The company is the European market leader for PVC profiles in the field of high-performance extrusion. KBE windows are not afraid of temperature fluctuations (from -65 to +80), high humidity. Profiles are easy to care for, do not suffer from the negative effects of household chemicals or other aggressive environments.

Advantages:

• durability and reliability. These windows are able to please the owner with their service for about 40-50 years. They are resistant to frequent temperature fluctuations, the effects of atmospheric phenomena;
• aesthetics. Structures are able to retain their appearance for a long time and remain snow-white due to the fact that a profile stabilizer is used in their production;
• comfort. If you purchase these windows, you can forget about the sounds that come from the street, because they have good sound insulation;
• economy. KBE windows have a high level of quality and show very high thermal insulation values, which helps to reduce heating costs.

VEKA

This company has been operating on the European market since 1968. Today, the company's factories are located in many countries: Germany, Russia, India, Poland, Singapore, France, Brazil, the USA and Canada, as well as China. This speaks of the demand for Veka windows all over the world. Traditionally good quality, low prices, individual approach, a variety of profile colors, solutions to original glazing issues - all this ensures leading positions among plastic window manufacturers all over the world.

Advantages:

• attractive design. They can be painted in various colors and are distinguished by graceful lines;
• functionality. These profiles have a high level of sound and noise insulation, resistant to negative environmental influences.
• practicality. In care, the design is unpretentious and is able to maintain an attractive appearance for many years.

SCHUCO

The company is one of the European leaders in its industry and today it is represented almost all over the world. The central logic center and headquarters of SchucoInternationalKG is located in Bielefeld (Germany).

The window systems of this company are the embodiment of a technically impeccable solution. The Schuco profile system meets all architectural and construction requirements for durability, modern design, operational efficiency, and resistance to aggressive environments.

Features of window systems:

• Schuco specialists took into account various climatic conditions when developing their recipes;
• due to the height of the glazing bead of 20 mm, the “edge effect” was reduced;
• increased anti-burglary characteristics;
• the use of weldable gray TPE seals, which gives the windows a more interesting look;
• thanks to the installation width of 70 mm and the five-chamber profile design, the windows have increased thermal protection.

They praise the window profiles of the Shuko system, which customers ordered on the website of this company.

TROCAL

This company is associated with rich traditions and constant investments, all key inventions in the field of metal-plastic windows belong to this brand. In 1967, thanks to the fact that the company developed multi-chamber profile systems, it made a real revolution in this area.

Advantages of Trocal windows:

• lead-free raw material formulation;
• modern stylish design;
• unique design features;
• moderate prices for finished products.

Well, we took you on a short tour of the world of metal-plastic windows. We hope that when choosing a window profile manufacturer, you will definitely use our recommendations. Enjoy the shopping!

As a rule, everything produced in Germany becomes a constant bestseller, even far beyond the borders of this country. German wooden windows are no exception, they are the real embodiment of the legendary German quality.

It is a striking fact, but a nation that so scrupulously honors centuries-old traditions has learned to deftly introduce them into modern life. Therefore, wooden windows from Germany are a new interpretation of centuries-old technologies and designs. This is a new architectural design, fresh solutions in decor and boldness in color shades. Despite a lot of new qualities, windows from Germany still remain the standard of reliability, practicality and style.

The Krauts company sells German windows as an official website - a representative of a German manufacturer in Russia. Therefore, with our help, you have a unique opportunity to appreciate the high level of German window production and their incredibly clear compliance with European GOSTs. Moreover, German windows purchased on the official website protect the consumer from any force majeure thanks to quality certificates and factory warranties.

A feature of wooden windows from Germany is their impeccable reputation and excellent performance, which no one can surpass.
domestic manufacturer. They have improved tightness due to ultra-modern seals and air pockets, as well as amazing sound and heat insulation properties. New generation glass can adapt to any type of room, providing the right level of light transmission and protection from infrared radiation and UV rays. It is windows and facade systems from Germany that can create in your home a level of comfort that you could not even dream of!

Choosing windows made in Germany, you get premium products that will serve you faithfully. German wooden windows with double-glazed windows of any complexity can be perfectly corrected in case of failure. They are more maintainable than plastic ones, since in PVC windows it is impossible to partially replace the frame, only a complete one. The service life of German window blocks is very long, thanks to which factories give a guarantee for their product of 10-15 years. We offer our customers German windows, the company of which has proven itself brilliantly all over the world.

German plastic windows are very popular and are considered a model of quality and durability. Many companies use modern technologies, use high-quality materials, thanks to which reliable, durable, sealed structures are obtained. REHAU is one of the leaders in Russia and Europe.

What accessories are used?

Rehau uses the most modern materials and components, such as Euro, Brilliant and Delight-Design profiles. These are high-quality polymers with a high efficiency. They not only perfectly retain heat and isolate noise, but also have an interesting design, thanks to which they fit into the interior of almost any room.

The German Rehau profile appeared on the market in 1958: these were the first polymeric materials that quickly conquered the market, proving their competitiveness. At the moment the company is one of the leaders in Russia and Europe.

In Russia, German profiles are directly used by the company Okna-City. By purchasing products from this manufacturer, you get a guarantee that the profile will be imported, and not manufactured in the Russian Federation using German technology.

Rehau profile Delight-DesignDelight-Design

What are the requirements for installing plastic windows read in our material.

Rehau windows are quite easy to install, so it is not necessary to involve specialists in the work. What are the features of installing these windows is described in our article

Do you think which profile is better, Rehau and Veka? Check out our comparative analysis of these profiles here.

Features of the modern REHAU profile

Window and door profiles produced by the company have a number of unique features for which they are appreciated by most buyers:

• High strength and reliability of the profile, long service life under any load.
• Colors do not become pale over the years, there are no yellow spots on white plastic.
• Materials are completely environmentally friendly, do not emit any odors and harmful substances.
• Thanks to special additives, plastic resists high temperatures well, does not burn or melt when exposed to them.
• The minimum service life of the product is 40 years. The manufacturer gives a guarantee for this.
• Products are certified and meet high quality standards.
• A wide range of profiles allows them to be used in any climatic conditions.

Profile Rehau Brilliant

Features of thermal insulation

Rehau German plastic windows are produced in a large number of options, so the customer has the opportunity to choose a profile that ideally matches his operating conditions, design and size wishes.

Residents of the northern regions can order a profile with a thick double-glazed window, capable of retaining heat indoors even at extremely low temperatures. Windows will immediately relieve possible drafts, discomfort associated with cold.

The reasons why the profile copes well with thermal insulation:

• The natural ability of air to insulate heat is correctly used, since the profile consists of many sealed chambers.
• The seal has several contours, which also provides reliable insulation and prevents drafts.
• Rebate expansion is not required, since a wide profile is initially used if it is planned to install a thick double-glazed window. Due to this, the ability of the material to isolate heat is not lost.

The German REHAU plastic window profile makes it effective at any time of the year in any climatic conditions. Windows will help to make warmer not only the heated room, but also the room where the heating system is passive. As a result, you can save maximum energy by using Rehau products.

Rehau Euro Profile

Some profile models use the principle of a three-chamber package. The sash has a depth of at least 6 cm: this design allows not only to keep the heat in the room, but also allows the window to let in more light. Noise isolation of this profile is also on top. The manufacturer managed to achieve this by using internal and external pre-chambers. Such a window can be used if it faces a noisy street.

REHAU Euro is a profitable solution, as the profile is highly practical, high quality, durable and has an affordable price. If the Delight Design New multi-chamber system is used, the sash depth will be 7 cm: this is one of the most advanced systems that can reliably isolate any noise and cold. The window also has a wide 3.5 cm reinforcement chamber, thanks to which the structure becomes rigid and durable. Such a window has high expanding abilities:

• The heat transfer coefficient of the reinforced profile is at least 1.5 W/m2K.
• The air penetration coefficient is below 0.1.
• The degree of load - C.
• The maximum number of chambers in such a profile is 5, the depth of construction is at least 7 cm: this allows you to make the window effective against any cold and noise.

By installing such windows, you will forever forget about noise, drafts and cold. Heating costs will be reduced. Rehau windows can be installed in a children's room, as they are completely safe for health.

How do REHAU plastic profiles attract consumers?

The German profile for plastic windows is not only practical, but also has attractive external characteristics. Windows have high-quality, pleasant to the touch smooth plastic. Bevels are convenient, they allow you to increase visibility, make the corners smooth, which increases not only the elegance of the profile. But also his safety.

The window closes very tightly. This is ensured by a seal located between the two circuits. Moisture, dust, air cannot pass through them, thanks to which its own microclimate is created in the room, any drafts are reliably eliminated. The seal is located around the entire perimeter of the structure, has a two-petal shape. The touch surface is wide enough, due to which moisture is well isolated.

The window will not let water through even with very heavy rain and wind. Elastic bands for sealing are used from high-quality ethylene propylene rubber, silicone rubber is less commonly used. Such materials serve for a very long time, after mechanical action on it, it easily restores its shape. The elasticity of rubber is maintained even in the conditions of the far north, so Rehau windows are perfect for the northern regions of Russia.

Price windows Rehau Delight-Design from 3750 RUB/m2

Opening and closing doors is easy and convenient. Designs can be different depending on the fittings and the desire of the customer. The manufacturer uses high-quality alloy steel fittings, which makes it reliable and durable.

Rehau profiles have a rich color that does not need to be updated. Plastic is dyed at the time of creation, various dyes are added to the mixture that is still being formed. Most window models are equipped with MACO fittings. This is a professional series, which is highly reliable. Many mechanisms are able to reliably protect against hacking, in addition, the company provides protection for windows from children.

If your apartment is located on the highest or, conversely, the lowest floor, anti-burglar fittings will not be superfluous, since most often criminals get into the premises of the first or last floor, using the window.

Rehau uses durable glass that can withstand high mechanical stress, so you don't have to worry about your window being broken.

By installing REHAU profiles, you guarantee yourself comfort and safety, you can forget about drafts, noise or cold forever.

"Which window profiles are the best?" – a question that is asked by everyone who wants to finally install energy-saving windows in their home. However, despite the external similarity of all structures, inside all the profiles are completely different, some of which do not at all correspond to the SNiP of the Russian Federation and are not recommended for installation in residential premises. First of all, when choosing a window system, it is necessary to pay attention to the number of chambers and the coefficient of heat resistance (the higher the better). The next important parameter of PVC windows is the provided opportunity for reinforcement - this increases the load-bearing characteristics of the structure, increases the service life of the system and its resistance to plastic deformation. To make it easier for the buyer to decide on the choice of a high-quality window system, this rating was collected. So, TOP 10 best companies and models of PVC window profiles:

aluPlast

Aluplast opens the quality rating of window profiles. The company provides a good range of technical solutions for window systems. The latest developments that increase the energy efficiency of structures are embodied in the AluPlast energeto series. The Energeto 8000 model has excellent thermal resistance when installed with triple glazing - 1.27 m2 * C / W. According to the manufacturer, if the structure is not reinforced with steel (this reduces the bearing capacity), its thermal conductivity is significantly reduced, reaching a heat resistance coefficient of up to 1.67 m2 * C / W.

Deceuninck

Deceuninck is ranked 9th in the pvc profile rating. The Belgian company has been manufacturing PVC window blanks for about 40 years at production facilities located in Europe, Asia and North America. The flagship of all Deceuninck lines is the 84mm Eforte model. This system is recommended for installation even in the northern latitudes of Russia due to the high coefficient of thermal resistance - 1.1 m2 * C / W. The service life of "Eforte" is 30-40 years, subject to the temperature amplitude from -60 to +75 degrees Celsius.

Proplex

The Russian company Proplex takes the 8th place in the rating of window profiles in 2018. All Proplex products are produced in Russia, so the prices for finished products from this profile are much lower than imported analogues. Proplex produces 5 different window systems: 2,3,4,5-chamber. For installation in dachas, loggias and non-residential premises, a two-chamber Proplex Outline is recommended - the cheapest design with a heat resistance coefficient of only 55 m2 * C / W. A more reliable system recommended for installation in apartments and residential premises is the four-chamber Proplex Comfort with a thermal resistance of 0.8 m2 * C / B, which fully meets the requirements of SNiP RF.

Kaleva

The seventh place in the ranking of pvc window profiles is occupied by the Kaleva brand. The company produces a dozen different models, each of which has its own advantages and disadvantages. The most inexpensive option with everything you need is Kaleva Standart - this is a four-chamber profile with the possibility of steel reinforcement and a built-in double-glazed window filled with an inert argon gas, which has a very low thermal conductivity. The Kaleva Titan Plus five-chamber window system is the company's most heat-saving and noise-suppressing design. Feature of Titan Plus: in addition to the main two-chamber 40mm insulating glass filled with argon, blinds and one more external glass are built into the system - thus, this model provides an incomparable degree of insulation with other analogues, thanks to an insulating glass with three independent air partitions, two of which are filled with argon.

Montblanc

Montblanc (pronounced MONT-BLANC) occupies a leading position in the ranking of plastic window profiles in 2018 in terms of price-quality ratio. Mont Blanc is an Austrian company that has been producing low-cost, high-quality profiles for translucent structures for more than 15 years. Due to the opening of the Mont Blanc industrial plant in the Moscow region in 2001, the company gained wide popularity in Russia. The company produces several lines of window systems: Montblanc, Reachmont, Goodwin and ECP. All products have a 40 to 60 year guaranteed service life and build widths of 58 to 70mm, except for the 80mm Montblanc Grand with six airboxes. A four-chamber Montblanc Quadro system with a thermal resistance coefficient of 0.8 C / W per m2 is recommended for installation - this is a high indicator that meets the requirements of GOST and Building Codes and Rules in many regions of the Russian Federation.

Salamander

The TOP 5 rating of profiles for plastic windows in 2018 is opened by one of the most expensive brands in the rating. The company has three different systems in its product range: Salamnder 2d/Streamline/BlueEvolution. The most budget option is considered to be a three-chamber 2D with the possibility of reinforcing the internal chambers with steel. The wall thickness of the Salamander 2D: external 3mm, seam 2.5m, and internal 1mm - this provides a good noise reduction rate (up to 46dB) and high energy efficiency class A +. This model is designed for installation of a single double-glazed window. Salamander BlueEvolution is the next model recommended for installation in any region of Russia. BlueEvolution is the only profile available on the Russian market (meaning at a reasonable price) with a maximum width of a built-in double-glazed window - 60mm (if desired, you can install a three-chamber double-glazed window). Salander BlueEvolution is ideal for the continental climate of Russia: it protects from heavy rains, effectively maintains the temperature even at -40 degrees, and reliably resists drafts, thanks to an elastic rubber seal.

KBE

4th place in the rating of pvc window profiles belongs to the German manufacturer KBE. The name of the rulers at KBE is tritely simple and depends on the width of the profile: KBE 58/70/76/88. As anyone who plans to change windows should know, the wider the system, the more cameras it has, which means that the heat saving indicators of such a design are obviously high.

The best option for installation is the KBE76MD model, a six-chamber design made using lead-free greenline technology from recycled PVC. Recycling PVC allows you to "kill" two birds with one stone: to recycle PVC waste and save on the cost of raw materials, which directly affects the retail price of the product.

The most important thing in greenline technology from KBE is the complete preservation of the physical and mechanical properties of the material, that is, raw materials of primary processing are no different from recycled materials. The best product from KBE is the 88mm greenline KBE AD: this model has an outer wall thickness of 3mm and 6 independent air compartments inside with the possibility of aluminum reinforcement - all this provides an unconditionally high rate of thermal efficiency and noise reduction.

VEKA

The bronze medalist in the ranking of the best pvc window profiles goes to VEKA. VEKA offers 8 class A models with 3mm outer wall thickness. The most economical solution is VEKO Euroline: a structure with three air chambers designed for an insulating glass unit up to 24 mm (usually two glasses - one chamber), the doors and frames in which it is possible to reinforce for greater reliability of the system.

The energy-efficient A++ class VEKO Swingline series will be the best solution in terms of price and quality for offices and apartments: 5 independent air chambers with an outer wall thickness of 3mm will provide warmth and comfort in the room even on harsh winter evenings. The most expensive and massive copy is VEKO Alphaline. This model is equipped with six air compartments with a total width of 90mm - these are the most heat-saving windows from VEKO in which you can install a double-glazed window up to 50mm thick (3 glasses) and enjoy silence and comfort all year round.

WDS

WDS takes the second place among the best profiles for plastic windows in 2018. The manufacturer has several product lines in its assortment, each of which has a difference in noise reduction coefficient, heat saving and the number of cameras: WDS 400/500, WDS 4/7/8 Series. The best in terms of price-quality ratio is the class A 60mm WDS4 model, equipped with 4 independent air chambers, the possibility of aluminum reinforcement up to 1.5mm. For northern latitudes, it recommends WDS8 series for installation: a six-chamber metal-plastic profile with the possibility of mounting a double-glazed window up to 44 wide - this model retains heat 2.5 times more efficiently than WDS400 / 4Series.

rehau

Rehau is the leader of the rating, the best profile for plastic windows in 2018. The range of the company consists of 7 types of profiles with different number of air chambers, construction width and sound insulation level. The Rehau Euro-design series is an affordable and high-quality three-chamber profile with a thickness of 60mm, therefore it is recommended for installation for those who do not want to overpay. For lovers of sound sleep, Rehau Intelio will be a real find: a five-chamber profile 86mm thick with a noise reduction coefficient of 36dB (without double-glazed windows).

In cold climates, the 86 mm Rehau Geneo will help save up to 80% of heat: the six-chamber design ensures high tightness, maintains a huge gap between the temperature amplitudes in the room and outside the window, and also creates reliable protection against drafts, thereby maintaining comfort and coziness in indoors throughout the winter, even at -60 degrees. According to the manufacturer, all Rehau products have a minimum service life of 40 years, and some models even 60 years.