The basis for a wreath of short and long branches. Christmas wreath of branches, twigs and vines: master classes with photos What branches can you make a wreath from

Traditionally, Christmas wreaths appear in homes on the eve of Christmas. Most often, they decorate doors and fireplaces, and any interior is filled with anticipation of the holiday. You can also decorate a large mirror in a wide frame with a wreath on a satin ribbon, attach it to a cornice and decorate curtains, or even use it to decorate a Christmas table by placing candles inside the wreath.

I have talked many times about how to doChristmas wreath with my own hands, because for me this topic is relevant - there are no Christmas trees here. And according to this wreath - a real lifesaver.

So today I will tell you how to make a Christmas wreath from twigs. To make such wreath very simple. It does not require any special decorations. All the necessary elements can be found in the park on a walk. The basis of the Christmas wreath is flexible birch branches, and the decoration is various cones, nuts, twigs. These branches are thin, flexible, well folded into a circle and do not break. Additionally, you can decorate with small Christmas balls for contrast.

So, we go to the park (or to the forest) and collect branches. You can collect everything "that lies badly": birch, willow, any shrubs and trees even unknown to you: o). Of course, you don’t need to cut off the bush under a clean one, a couple of branches from one tree - and to the next. We love nature! Take branches not thick, but not too thin.

Before you start creating, you need to keep in mind that the cut rods dry pretty quickly and become non-plastic, so if you decide to make a wreath with your own hands, you should not put it off for a long time.
At home, we collect all the branches in one neat bundle, bandage. We place our creation in a bath or where it’s not a pity (suddenly you have a gilded bath: o), fill it with hot water. And we go to drink tea... For about an hour.

After that, you need to twist the wreath. There are several options here:

Method 1. Make a wire frame and wrap it with rods. However, the wire still needs to be found: o)

Method 2. If you did not pre-soak the branches, then before forming a circle from the rods, each branch must be bent for every 5 cm, otherwise it may break during operation.

We form a circle from one long branch.

Then, holding the braided ends of the first branch and the beginning of the second in one hand, we braid the first circle with the other. And so on, branch after branch. Gradually, the branches begin to cling to each other.

After the branches are all wound up, we take water-based paint (for example, matte for interior work, almost does not smell and dries quickly) or acrylic paint. When painting the wreath, use a dry brush with a small amount of paint on the tip.

We paint our wreath. Let's dry. Then, for greater beauty, we sprinkle with gold paint from a spray can (sold in a hardware store or in a car).

That's it - the hardest part is over! You can decorate the finished wreath with satin ribbons, beads, Christmas decorations, bells, felt figurines, birds, decorative flowers and even gingerbread cookies.

You can hang it by ribbons from the ceiling (if you have something to tie to), on a nail to a wall or on a door.

The wreath, of course, can not be painted.

Method 3. And if you also managed to pick up cones in the forest, then you can arrange a wreath in such an interesting way.

For this we need: birch branches; various cones: pine cones, larch cones (you can also use medium-sized spruce cones, acorns), walnuts, dried twigs "crackers" ; glue gun or some kind of silicone glue in a tube; silver paint in a can; small Christmas balls; satin ribbon; two bells.
The cones must be dried on the battery so that they open.

Take several branches, form a circle and tie their ends. We fold the birch branches into a bundle, of such thickness that the bundle is completely covered by the palm of your hand. We fasten the bundle in the middle with a strong thread. Then we fasten again after 10-15 cm - and so on in a circle. At the end, we overlap the branches on each other and fasten with a thread.
Wind the rest of the branches on top. Those. wrap around an already made frame of branches. We fill the ends in the branches themselves (like the end of a thread in a ball). It turns out here is such a bezel from birch branches.

We distribute decorative elements on the base and compose a composition. Don't glue yet, as you may want to change the order of the decorations.

As soon as you finally make sure that the composition is finished, you can start gluing.

You can decorate your home for the New Year and Christmas not only with tinsel, needles and toys, but also with original wreaths. There are many ways to make your own Christmas wreath. You can prepare a classic wreath of spruce twigs or a beautiful wreath of cones, cool paper or unusual paper, orange circles. But if there was no suitable material at hand, we suggest going to the nearest park or garden to collect or cut twigs, twigs, vines. It is from natural materials that we will make crafts - a Christmas wreath. For needlewomen, the designers of the Zatusim website have prepared several detailed master classes that show how to make a Christmas wreath with your own hands step by step.

Christmas wreath base

Making any Christmas wreath begins with the preparation of the base. Someone uses cardboard, others wire. We offer you to learn how to make a simple base for a Christmas wreath from birch branches with your own hands.

For manufacturing you will need:

birch branches;
Leg-split;
Scissors

It is necessary to make a Christmas wreath from branches on the same day as you have collected them. Otherwise, they will begin to dry out and break during operation.

If it is necessary to postpone work, we bend the rods into a ring and tie them. Alternatively, they can be soaked in water before work.

We sort birch twigs by size and immediately remove excess leaves, side branches, knots from them.

We start weaving the base with thick twigs of medium length.

From the selected branches we form a circle. We lay out the blanks so that the thick edge of one branch coincides with the thin one of the other.

Tie twine to the end of one rope.

We braid the rope around the first branch.

We tie the thick edge of the second branch.

And we continue to weave the rods until we get a circle.

We got a not quite even frame, with which we will work. Its flaws will be eliminated in the future, so you should not try to give the frame an ideal shape at this stage.

We attach another branch to the frame and fasten it with twine.

We wrap the frame with a long twig.

We continue to weave a wreath of branches, attaching new long rods.

When the base becomes dense enough, you can interlace the branches without tying them with twine. This will create the impression that the wreath is woven from a single vine.

Now you can level the base, giving it an even shape. Branches must be handled carefully, as they, despite their flexibility, can break.

The finished wreath can be put under pressure overnight.

It remains to decorate the base for the Christmas wreath of twigs. To do this, you can use any available materials: needles, ribbons, bows, bells, beads.

Add some Christmas decorations.

Pictures of Christmas wreaths from branches will tell you how to colorfully decorate the craft.

DIY Christmas wreath of branches: video

How to make a Christmas wreath of branches more colorful is shown in the video:

Christmas vine wreath

Original Christmas wreaths are obtained from the vine. Such material bends more easily, so weaving a wreath is not difficult. We offer to make a Christmas wreath from a vine with your own hands and decorate it with sprigs of laurel and rosemary.

To make a wreath you will need:

Vine;
Laurel branches;
sprigs of rosemary;
Fabric tape.

Tools and auxiliary materials:

wire cutters;
Side cutters;
Wire;
Colored wire.

We twist the base under the Christmas wreath from the vine.

With a thin wire we attach sprigs of rosemary and laurel to the frame. You can put the decor on the glue. But when using wire or wire for fastening, the decor can be removed after the holiday, and the base of the wreath can be used for decorating for Easter or the next New Year.

You can complement the decor with branches with berries.

It remains to paint the wreath with a bow. It can be tied with ribbon. Ribbon bows with wire inside look original and retain their shape well.

We fasten all the elements to the wreath and get such an original Christmas or New Year decoration.

Video: vine Christmas wreath

How to make Christmas wreaths based on vines is shown in detail in the video:

DIY Christmas wreath of branches and sticks: master class

You can use for crafts not only flexible branches of willow, birch or vine. An original Christmas or New Year wreath can be made with your own hands from branches and sticks.

To make a colorful wreath you will need:

Sticks 5-8 cm long;
Thick paper or cardboard;
cones;
Silver ribbon;
New Year's toys.

Auxiliary materials and tools:

Acrylic paints;
tassel;
Glue gun.

We begin to make a Christmas wreath with our own hands step by step from branches cut into a size of 5 - 8 cm. You will need both straight sticks and curved, forked, with knots.

Each branch is painted white with acrylic paint.

Leave blanks to dry completely.

The branches will dry for about 1 hour.

On a cardboard sheet, draw a circle along which we will lay out the base of the wreath.

We spread the sticks of approximately the same shape and size in a circle.

You should get a neat wooden ring.

Now lay out the inner circle of a smaller diameter.

We connect the outer sticks and the inner transverse branches.

You can simultaneously place several transverse rods.

To keep the structure well, we fix the transverse blanks with glue.

We continue to glue the sticks, giving the wreath volume.

At the end we glue forked and uneven sticks.

We got such an original wreath of sticks and branches.

Let's start decorating the base of the wreath.

We glue snowflakes in a chaotic manner.

And pine cones.

It remains to attach a colorful bow, which can be made from a shiny braid or ribbon.

And decorate the craft with decorative elements.

Snowflakes.

In the center we place a cool toy, which we tie with twine.

Unusual Christmas wreath is ready.

From sticks and branches, you can make unusual Christmas wreaths and other New Year decorations.

Video: master class of a New Year's wreath from branches

An unusual weaving of a wreath of sticks and birch branches using a wire frame is shown in the video master class:

Our favorite holiday - New Year - is just around the corner. One often hears complaints that, they say, the holiday is approaching, but there is no corresponding mood. However, if you sit and wait until someone comes and creates it for us, you can sit all your life, but never wait - you have to do miracles yourself.

Where to begin? Perhaps, from the creation of New Year and Christmas interior decorations, especially since you can’t even approach similar things in stores now - truly beautiful ones are prohibitively expensive. With your own hands, you can create a real work of art that no one else will have, because you will only make it in accordance with your own taste and imagination. To begin with, let's make from willow twigs.

Materials for the New Year's wreath

Rods - their number depends on how voluminous your wreath will be
Wire - a small coil
Glue or glue gun
cones
small size
Lace
Christmas tinsel or rain
Artificial snow or Styrofoam crumbs
Spray can of paint - silver or gold
Rose hips or rowan berries
Two tablespoons of starch

Where to find willow twigs

The first thing to do is to collect branches for our wreath. It’s good if a willow grows near your house, from which you can cut several branches, but if it’s not nearby, it doesn’t matter, there will be a reason to take a walk to the nearest park or forest, and at the same time get some fresh air. It is the willow that we need because the branches of this tree, as folklore testifies, “bend but do not break,” which is very important for a wreath.

However, if for some reason you do not find willow twigs, any other branches will fit, just keep in mind that there will be more trouble with it - due to their fragility, they will have to be fastened more often.

How to make a New Year's wreath - we fasten the branches

Now let's start weaving a wreath: having trimmed the branches along the length, roll them up with a “donut” and firmly fix the ends with a wire. To be sure that at the most important moment your wreath will not fall apart, fasten the rods in a few more places.

Or you can buy a blank for a wreath and decorate it as you wish.

How to prepare cones

After making sure that the "blank" is holding tight, you can proceed to the decoration, which, as we have said, depends only on your imagination. The task is to randomly attach all the details that you have prepared for it to the wreath. But first they need to be properly processed.

The cones can be left in their, so to speak, original form, but if you don’t want to get your hands dirty with resin at the most inopportune moment, you can first boil them in an old saucepan or basin. They will darken after cooking, but don't let that scare you. Spread the wet cones on paper, after drying, they will acquire a presentable appearance - they will become light and straighten out. Paint them with paint from an aerosol can and dry them - along with Christmas tree decorations, you can attach them to a wreath.

How to prepare lace

The lace prepared by us for decoration must be processed in advance with a paste, boiled at the rate of: two tablespoons of starch per glass of sugar. After wetting the lace in the paste, give it the desired shape - for example, a flower - and leave it to dry completely.

Of course, lace blanks can be treated with PVA glue - it will also allow them to keep their shape well, but thanks to starch they will glisten, which is the first thing for New Year's decorations. We fasten lace, ribbons and twigs with rose hips or rowan berries, tinsel or rain with a glue gun.

"Snow" on a New Year's wreath

The last stage of work - let's call it hoisting a cherry on a cake: we sprinkle a wreath, and in the absence of it, we glue foam plastic crumbs to it. Although if you just paint the twigs in a wreath with white paint, it will also turn out original.

That's it, our wreath is ready - you can hang it on the door so that happiness, kindness and well-being know which house to look into first.

I want to bring to your attention a very simple wreath for Christmas and New Year.

Used for work:

birch branches;

wire;

Christmas tree beads;

New Year's toys;

figurine - an angel.

The secret of the wreath is that it is made from short birch twigs. Many people know that it is possible to weave a wreath from birch branches, but when they go for a walk in the forest, they cannot find long branches from which it is easy to weave a wreath.

Watch the video clip and it will become clear that a wreath can be made from short branches.

We connect the "bottom" of the first bundle with the "top" of the second and twist them with wire. We bend the branches into a wreath, put the ends of the bundles a little on top of each other andalso twist with wire. Next, paint the wreath. I used a car silver paint in a can. It dries very quickly. Next, we wrap the wreath with beads and hang it tocurtain. Thanks to the fact that he thick , decorations are easily held on it, nothing needs to be glued. I put on him a figurine with an angel. I attached a ball to the top of the wreath on paper clips, to the bottom of the star, hooked several toys to the tulle nearby.

I'll be glad if this idea is useful to you. I weave wreaths immediately after a walk, if the branches lie down and dry, they are better soak in hot water, then they will become soft. I’ll write right away that I don’t break birch trees, I collect everything only from the ground! We have a strong wind in winter and there are a lot of branches on the ground.

Traditionally, Christmas wreaths appear in homes on the eve of Christmas.

Most often, they decorate doors and fireplaces, and any interior is filled with anticipation of the holiday.

You can also decorate a large mirror in a wide frame with a wreath on a satin ribbon, attach it to a cornice and decorate curtains, or even use it to decorate a Christmas table by placing candles inside the wreath.

I have talked many times about how to dowith my own hands, because for me this topic is relevant - there are no Christmas trees here. And according to this wreath - a real lifesaver.

So today I will tell you how to make from rods. To make such wreath very simple. It does not require any special decorations. All the necessary elements can be found in the park on a walk. The basis of the Christmas wreath is flexible birch branches, and the decoration is various cones, nuts, twigs. These branches are thin, flexible, well folded into a circle and do not break. Additionally, you can decorate with small Christmas balls for contrast.