Rest gazebo with barbecue. Country gazebos with barbecue: types and features. What should be the size of the structure

Probably, there are no such people who would not love a comfortable summer vacation. And when there is a chic covered gazebo with barbecue and barbecue in the yard, what could be better? Fresh air, barbecue, your own vegetables and fruits, gatherings with friends and family. The main difference between a gazebo and a house is that it does not have load-bearing walls. This is a small indoor area with a table and a barbecue (barbecue). By the way, the brazier requires special attention. It is very important to install it correctly so that you can cook and relax at the same time at a large round table without fear of smoke and heat. About all the nuances of building a gazebo with your own hands, read on.

Where to place a gazebo: choosing a place

Initially, you have to choose a place for the future canopy. There are no special criteria here. Everything is at the discretion of the owner. The main thing, perhaps, is to put it away from the neighbors. Too close to your home, it is also not worth it due to fire safety. And yet, it is most convenient when the entrance of the gazebo "looks" at the house. This makes serving easier. Now we have to think through everything to the smallest detail: dimensions, zones, materials.

As a variant of the construction project, you can use this

It is very important at this stage to provide absolutely all the nuances. Especially what you will build from.

Material

Wood

This is the most common type of material: it is available, inexpensive, easy to use. If you are not too lazy and do everything right, then such a structure will serve you for a very long time. The ability to use a simplified foundation due to the low weight of the structure is also a huge plus of this choice.

Photo gallery: wooden gazebos

Design decision
"Lightweight" version of the design
In winter, a wooden gazebo looks especially beautiful. Wood is an easy-to-use material: it allows you to experiment with shapes

Brick

The only disadvantage of this material is the relatively high cost. This material is refractory, which is very important when the brazier burns and sparks can fly out. Undoubtedly, such a structure will serve you faithfully for a long time, without requiring much effort for maintenance and repair. And lovers of year-round outdoor recreation will like this gazebo, as it will be much warmer in it in winter.

Photo gallery: brick structures

In such a gazebo, cooking is a pleasure. Another version of the gazebo You won’t sit much in a small gazebo, but the main thing in it is a stove An interesting project of a gazebo made of bricks for a summer residence One of the main advantages of using bricks is fire safety.

Forged construction

This is a very beautiful and elegant building. Such charm will surprise any neighbor, relative or friend. But! Without special skills and a huge amount of free time, such a gazebo cannot be built.

Since we are considering options that can be dealt with on our own, without special skills, we will leave this model to specialists, and dwell on the first two building materials in more detail.

Photo gallery: forged structures in the garden

Wrought iron gazebo looks very expensive Gazebo with hipped roof Forged structure located next to the furnace

Wooden gazebo in stages

Very important! If you want to build a wooden structure, do not spare the finances for its processing so that it will serve you for a long time. Otherwise, it will soon start to rot.

For it, it is necessary to acquire bars 6 meters long for the least amount of waste. Any structure requires a solid, even support under it - a foundation. For a wooden canopy, a columnar foundation is perfect. It is ideal for light structures. Columns can be made of both concrete and brick. In no case is it recommended to take white brick, aerated concrete and foam concrete block as raw materials. These materials do not tolerate moisture well. If concrete is chosen as the material, then it is poured into the formwork. Further construction takes place on these columns. Remember that the base for the future recreation area must be even. Check it with a level.

A good option for such a foundation would be the use of timber. But this option is less durable. And if you still decide on such a building material, then do not forget to process the ends of the columns immersed in the ground with bituminous mastic.

The columns should be located in the corners and along the perimeter of the future walls. Be extremely careful when creating the base. The stability of the future structure depends on this.

Brick-based column foundation

Attach the base (lower harness) to the posts - bars measuring 15 × 15 centimeters. Attach the floor logs and frame racks to them with screws and metal corners. For a strictly vertical position of the frame, install additional supports. From above, connect your frame with the top strapping. For the reliability and stability of the frame, use the corners to add wooden horizontal lintels of the same section as the frame itself.

Installation of a wooden gazebo

Roof

It is recommended to choose a duplex. You can cover it, for example, with a metal tile. And moisture resistant plywood would be a good option. In general, the structure should be light and have a sufficient angle of inclination so that snow can easily roll off it in the winter season.

The frame is installed and you can lay the floor. Even simple boards will serve as material for it. But you can come up with something more modern. The floor is attached to the lags. You don't need to stack the boards side by side. Leave a small gap to drain rainwater.

Finishing

Now you need to fill in the wall space between the vertical posts. Show your imagination and design your recreation area so that you can't take your eyes off it! Decorate it: come up with curtains, let grapes grow on it, etc.

Video: creating and arranging a gazebo in the Fazenda program

We build a gazebo out of bricks

An increasing number of summer residents have recently opted for brick buildings. This comes with a number of benefits. First of all, such a structure can be used all year round if it is closed to the maximum. It will be a refractory building and it will be possible not only to put a brazier in it, but to build a whole furnace! In terms of service life, it is more profitable than wood. Faithfully, without requiring special care, it will serve you for a very long period of time. Yes, and visually it will look very beautiful. But for its construction, you will have to try a lot, starting with the foundation. Light columnar is no longer suitable here.

So, like any building, a brick canopy needs to start with a plan. Think over everything in it to the smallest detail, all sizes, appearance, etc.

Drawing of a brick gazebo

Select and prepare a site for construction. Brick structures are quite heavy, so it is recommended to make a strip or slab foundation. To do this, you need to dig a pit about a meter deep. Pour 15-20 centimeters of rubble into it, tamp it well and level it. Lay waterproofing on top. Lay the reinforcement and make a mortar of 5 parts crushed stone, 3 parts sand and 1 part concrete. Next, pour it into the pit. In places where the pillars of the future building will stand, install metal pipes and leave everything for 7-10 days. Make a separate BBQ concrete base.

The foundation and the beginning of laying a brick gazebo

How to lay a brick

Masonry can be carried out both with ordinary brick and facing. To give individuality, you can use bricks of different colors, laying them out in a pattern. The height of the masonry is usually 1 meter, but depending on the owner's intention, its dimensions change. The use of ordinary cement mortar is perfect for hitching bricks. Just don't forget to leave room for the door! And it will be like in the movie about Shurik. If you carry out laying in 1-2 bricks, then the gazebo will be warmer, and its use will be possible all year round. If you do this in 0.5 bricks, then it will be more of a summer option.

When laying the first row, leave space in the walls for the floor joists (about 50 centimeters apart). There will soon be a floor board.

Roof selection (photo gallery)

Depending on the shape of your design, the roof can be made gable, four-slope or hipped.

Gable roof scheme Detailed diagram of a hipped roof

The roofing material can be any roofing product of your choice.

Choosing a brazier

Where without him! How can you arrange garden or summer gatherings with family and friends without barbecue?! Consider the possible options.

collapsible

This option is more suitable for hiking than for installation near the house. A significant disadvantage of this choice is that it will dry out your meat. Therefore, it is not suitable for gourmets and connoisseurs. It is made from thin steel sheets. The brazier does not hold heat well. Firewood in it and coal burn out too quickly. For this reason, they constantly wave a sheet of cardboard over him. Its installation requires a flat horizontal surface. After use, it is not too convenient to disassemble. Not only is it hot and dirty, but the mount often seizes from high temperatures.

cast iron

This grill is for true connoisseurs and gourmets. It makes excellent skewers. In such a temperature and heat is maintained for a long time, and the cooking process in it is more uniform. True, its cost starts from eight hundred dollars (about 50,000 rubles). Expensive pleasure. But if you decide that you need it, then remember: the wall thickness in it should start from 8 millimeters, and the depth should be at least 15 centimeters.

Desktop

It is somewhat similar to a barbecue and was created specifically for small companies. The grate on it is heated with the help of gas. Cooking on such a grill is quick and not troublesome. Sometimes it has several compartments, which makes it possible to cook not one dish, but several at once. Nuance - make sure that the connection of gas equipment and barbecue is compatible. This model is not of our production and is brought to us from the USA, so its installation is not always problem-free.

This building cannot be called a brazier. But it will be an ideal alternative for someone who spends a lot of time in the country and loves to eat barbecue. You can build it separately from the gazebo: in this way you can distinguish between a recreation area and a cooking area. It is made from refractory (furnace) bricks. It is convenient to cook on such an oven, it keeps heat perfectly. True, its cost is quite high. The smallest stove will cost from $800.

Stone oven in the yard

Grill oven or cast iron brazier

In most of these models, food is cooked on gas. Often they have built-in burners and an oven. Great for a big company. The surface of such plates is stone, heated by volcanic coal. Equipped with a temperature indicator. Most models come with pull-out trays and a folding table. The cost of such pleasure starts from $ 200.

Such a device was invented in Russia. It does not need to be disassembled after use, folded, dragged home. It can be thrown away. This is perhaps his only positive point. BUT! And, of course, its cost is also very small - from 85 rubles. This is an extreme version of the camping grill.

Mini barbecue oven

Shish kebab differs from barbecue in that it is cooked on a grill, and not on a skewer or skewer. Barbecuing is cleaner, more practical, more aesthetic and safer. The cost of such a furnace starts at $ 50.

A gazebo with a barbecue or a barbecue is an integral part of a country holiday. The variety of buildings in the recreation area is huge. You just need to show imagination and not be lazy to create your own miracle in the yard. We wish you good luck!

The construction of various stoves in gazebos is gaining popularity day by day. Today you can find a grill stove, barbecue, barbecue and even a fireplace stove. There are a huge number of types of stoves, and the above names are not all. Combined stoves are built in gazebos, combining several functions at once.

This article contains a short overview of the types of gazebo stoves, as well as very detailed instructions for building a gazebo stove with your own hands.

Types of stoves for gazebos

In this section, we will cover the most popular options: a barbecue oven for a gazebo, barbecue ovens and Russians. We will also talk about kitchen complexes for gazebos, which include several options for hearths.

Barbecue and Russian oven in the gazebo

The Russian stove is not built in the gazebo. Not only is this design very complex, it also takes up a lot of space. But you can meet mini Russian stoves. They are much smaller, with a short hearth. In fact, this is a barbecue stove or barbecue, stylized as a Russian stove. Sometimes even a grill spit is placed at the mouth.

Mini Russian stove for a gazebo

Below - a gazebo with a stove - barbecue. Relatively uncomplicated option, very compact, but at the same time convenient. It can be built not only in the gazebo, but also in a small summer kitchen, as there is a tile. The latter, by the way, can be converted for the installation of a cauldron.

Gazebo closed, with a barbecue oven

Stoves - barbecues for gazebos

This photo of the stove for the gazebo is almost the same in appearance as the previous one, only instead of a barbecue there is a barbecue, and the stove is on the left side. But the design itself is even smaller in size. The foundation for it can be made columnar, shallow.

The stove is a brazier for a gazebo. Photo of model with stove and sink

Another stove for a gazebo with a barbecue, made of bricks. Unlike the previous one, it has an ash pan, which will facilitate the care of the stove. But the stove or sink is not provided.

Arbor with a hearth in the center and an ash pan

Kitchen complex and stove-fireplace for the gazebo

And here is the whole complex: a stove with a gazebo and a barbecue, as well as a smokehouse and tiles. On the sides at the bottom and at the top are equipped with closed shelves for small items. It turned out to be a versatile and very comfortable kitchen area. The only disadvantage of such a building is the high price and the need for a serious slab foundation.

Furnace complex for a gazebo: barbecue, stove, Russian stove and smokehouse

And the last example: a fireplace stove in the gazebo. The photo of the building speaks for itself. Such a stove is more intended for aesthetic pleasure from the sight of live fire than practical use.

Furnace for a gazebo

Construction of a stove - barbecue

For work, we will use two types of bricks: ordinary and fireclay, Sh-47. You will also need a clay-sand mixture, a mortar trowel, a building level and a special stone saw. We prepare the foundation for the stove in advance, it can be slab or tape, along the contour of the masonry.

Work from 1 to 11 row

Before you start laying out the first row of the stove, a layer of waterproofing material must be laid on the foundation. To do this, you can use an ordinary roofing material. In the first row, we immediately form three niches: on the sides - for kitchen utensils, and in the middle - under the firewood. We lay out the next seven rows in the same way, only we make dressings so that the seams between the bricks do not match.

Do-it-yourself barbecue stove

The ninth row of the stove is laid out in almost the same way as all the previous ones. The exception is the extreme bricks of the side niches. On each of them we cut down to 30 degrees, half the length of the brick. This is necessary for the subsequent formation of arched ceilings above the niches of the stove. How the saw cuts are oriented, and where are the bricks with them - you can see in the following figure.

How to make a gazebo stove

For arched ceilings, you need to use fireclay bricks marked Sh-47. The required bending radius of the floors is provided by sawing the bricks. But for the central part, it is necessary to make a base for overlapping - from a metal corner and a strip of metal laid next to it. A row of fireclay bricks is also laid on this base.

How to build a kitchen area for a gazebo

In the tenth row, we again make cuts on individual elements. They are located in the same places, but are already oriented downward, repeating the bend of the arched ceilings. The eleventh row of the stove already covers the arches, and the bricks above them are also sawn out. In the figure, the cuts of rows 10 and 11 are marked with different colors.

The device of arched ceilings for barbecue

Masonry from 12 to 20 row

We lay the row in such a way that over the eleventh row of the stove we get an overlap of a quarter of a brick in front and on the sides. This can be achieved by slightly increasing the width of the seams between the stove bricks.

Overlapping niches of the barbecue stove

The thirteenth row is under the firebox of the stove. The side walls are laid out of simple bricks, and the main part is made of fireclay. The extreme elements of the central part are released forward by a quarter. Next, we put the fourteenth row, which is the base of the firebox.

Raising the firebox

We lay out the fifteenth and sixteenth rows in the same way as the fourteenth. But in the extreme rows of the fireclay core we make rounded chamfers, about 2 cm deep. They are needed in order to insert barbecue grills - in several levels. The location of the chamfers is shown in the figure below. Next, on top of the sixteenth row, we build an arched ceiling of the firebox. It is all made from the same Sh-47.

We build an arched ceiling of the firebox

From the seventeenth to the twentieth row - we raise the back, as well as the side walls of the firebox. We cut out the extreme bricks in the form of an arched ceiling. And we release the side fireclay bricks of the twentieth row of the stove inside by 1/4. From below they are cut obliquely.

Raising the rear and side walls of the firebox

From the 21st row to the formation of the pipe. Completion of works

In the same way, we lay out the 21st, 22nd, 23rd and 24th rows: in each of them we release side fireclay bricks by 1/4. The twenty-fourth row should go with the release 1/4 forward and on the sides. The hole in it becomes the size of an ordinary brick.

24th row of the stove in the gazebo

The laying of the stove itself is finished, it remains only to form a pipe. It is laid out from an ordinary brick, but along the contour of fireclay. The laying principle is visible in the following figure. The number of rows in the pipe depends on the height of the gazebo. Therefore, here you need to look into the drawings and continue to work on them.

Pipe erection

The stove is ready, it remains only to finish the countertop and hang the doors to the niches. We lay out the tabletop with tiles, or we order a ready-made coating, made of artificial or natural stone. The same doors - can be homemade or custom.

Finished barbecue oven

Good day to all!

In this article we will talk about interesting design projects for BBQ gazebos. Some summer residents on their site just put a small gazebo for relaxation, while others, in order to make not only their vacation more comfortable, but also invite friends, install stoves with barbecue and barbecue in the gazebos.

Before you start building a gazebo with barbecue and barbecue, you decide what your gazebo will be.

First, it is a small building with a small brazier, a table and chairs.

Secondly, this is a closed gazebo for year-round use, or an open summer version with a stove.

Thirdly, this is a rather capital building, which is divided into two zones: a kitchen and a dining room.

Having decided on the choice of your option, then you need to draw up a project plan and choose the material from which your gazebo will be built.

It is best to make a barbecue gazebo out of brick. In this case, it will be more durable. If you decide to use a brick, then perhaps these tips will help you.

- to avoid soot and smoke, it is necessary to make a chimney zone;

- the brazier must be protected with a roof, if it is not installed, then we cover it with acrylic varnish;

- if the brazier is used for mass cooking, then you will need a blower, it will create a more intense burning of firewood;

- the firebox should be the width of the skewers;

- masonry should be in a refractory mixture and fireclay type clay or special compounds that can withstand high temperatures;

- the brick should be soaked for five minutes before cutting - this will simplify the task.

Projects of a gazebo with a barbecue grill and a stove (to do it yourself)

A wooden gazebo, of course, is the most cost-effective option in terms of material cost and labor intensity. In addition, if you are not a bricklayer, then a wooden gazebo is the best option for your dacha.

Another option is brick. In terms of fire safety, it is much more profitable than a wooden structure, and it will last much longer.

However, you can also use this option when the stove is located in the brick part of the gazebo, and the rest of the structure is wooden.

Another version of the gazebo, less common, is a wrought iron gazebo.

Such gazebos are mainly purchased in stores.

It is not difficult to build a brick gazebo with barbecue and barbecue, especially if you have bricklaying skills. However, if you have good familiar masons, then perhaps they will help you build the desired structure on the site.

As usual, first a foundation is made, on which a layer of waterproofing is applied, and then walls are placed. It is best to start laying bricks from the entrance opening, and then move along the perimeter.

We build the walls of the gazebo according to your project (view and height). At the same time we make the base for the barbecue and smokehouse.

When the walls are erected to the desired height, we make a truss system

We equip the countertop, places for a cauldron, barbecue. As a result, we should get the following.

Well, at the very end, we sew up the roof with the material that you have chosen for this purpose.

Below is a plan of a closed gazebo with barbecue and barbecue.

Photos of simple and beautiful gazebos for summer cottages

No matter what they say, but the gazebo arranged on the site should fit into the overall landscape, especially since you put not just four pillars with a roof, but make your building an art of design.

Let's see examples of some pretty interesting and original gazebo projects.

Quite an interesting and original project, combined from wood, stone and polycarbonate.

Forged metal gazebos look no less original and beautiful.

An interesting version of the gazebo, in which the brazier is made of stone.

A few more options are quite simple gazebos for summer cottages. All of them are made mainly of wood.

Any country cottage or dacha is intended not only for gardening, they also mean a pleasant outdoor recreation. A self-made gazebo with a barbecue will become a favorite meeting place with friends and family.

The possible designs of summer terraces and the types of stoves for them are described in the article "". Here we will consider the methods of their construction using the example of the simplest structures.

Before building any structure, it is necessary to draw up a project and make a drawing. It is necessary to take into account the place allotted for construction. It is better if it is at a short distance from the residential building, so that it is convenient to carry food, dishes and furniture there.

At the same time, you can’t build a terrace too close to the dacha and the neighboring plot, otherwise the smoke from the barbecue will interfere with the quiet rest of the company, and the neighbors may not like the noise of fun.

The construction of all buildings and structures consists of several mandatory stages:

• laying the foundation;
• walling;
• roof installation.

The choice of the type of foundation and its device

For summer arbors, the following types of bases are suitable:

• The pile support is able to withstand the load of light structures, such as a wooden or metal-framed terrace.
• The slab base is suitable for more weighty structures, for example, for an open-type stone gazebo.
• necessary for a massive winter-type building, for example, made of brick.

It is important to understand that a stone oven is a rather heavy structure that requires a monolithic base. When using piles or a strip-type foundation as a support, it is necessary to pour a concrete base in the place where the hearth will be installed, and in accordance with its dimensions. A reinforced concrete layer 15–20 cm thick is sufficient. A solid slab is able to cope with the load from the furnace without reinforcement.

Pile foundation installation

If a decision is made to build a gazebo made of wood or metal in the country, you can make a foundation of piles. To do this, prepare four holes in the ground at the corners of the future building (it is convenient to use a drill). A layer of sand and gravel is poured to the bottom, formwork is made of plywood or boards, metal rods are fixed for reinforcement. Inside, a pillar made of metal or wood is installed in the center and concrete is poured around it.

Thematic material:

There is a more convenient and easier option to build a pile foundation - to lay an asbestos-cement pipe in the holes. And pour concrete into it. This method does not require the construction of formwork and material for the base pillar.

In addition, piles can be installed ready-made - in the form of solid reinforced concrete supports. This is much faster, but will require lifting equipment to transport and stack them.

A beam or a metal profile is placed on a frozen pile-type base and a frame is made in the form of a square. From this frame, the subsequent erection of walls is carried out.

Solid slab as foundation

For a slab base, it is necessary to remove the top layer of soil on the entire construction site. Here you need to take into account that it is better to make a slab larger in area than according to the design of the gazebo. It is good if the base protrudes 30-40 centimeters beyond the walls of the terrace. Such a blind area will prevent rotting and corrosion of materials.

After removing 30–40 cm of the upper layer, sand is poured into the resulting depression and rammed, then crushed stone comes. Lay metal reinforcement along the bottom of the pit. It is evenly poured with concrete so that the height of the slab is 15–20 cm above ground level.

Tape type foundation

Solid gazebos need a solid foundation. For him, they dig a trench around the perimeter of the structure. The soil is rammed, sand and gravel fall asleep. Then formwork and reinforcement are made, concrete is poured. The formwork is removed only after the mortar has solidified, and the frame of the gazebo is welded to the protruding ends of the reinforcement.

After the construction of the foundation, it is necessary to lay a waterproofing layer. It can be any rolled protection (roofing material, roofing felt, dense polyethylene) or coating with bituminous mastic. There should be no direct contact of concrete parts with other materials - in order to avoid them getting wet.

Construction of wooden walls

The next step is the construction of load-bearing racks and their strapping. The most common option is wooden walls. The cost of the material is low, and wood, due to its versatility, will fit perfectly into the design of a site of any style.

As racks, a square beam of at least 15 × 15 cm or round logs is used. The bars connected along the perimeter of the foundation (base - square, circle, polygon) are fixed with anchor bolts. This is the bottom harness.

Logs are placed on it - the base for the floor, wood with a section of 10 × 10 cm. The columns are installed strictly vertically. For greater rigidity, you need to repeat the strapping with a beam at a distance of 1–1.5 meters from ground level. You can strengthen the structure with diagonal bars. The height of the columns must be at least 2.5 meters.

Along the edge of the vertical racks, you need to make an upper trim. It will be supported by rafters - the bearing part of the roof.

The walls can be sheathed with boards, built from logs, or left one or all sides of the gazebo open. Looks good . It protects well from the sun and.

When working with wood, it is important to remember its features, such as:

• Easy flammability - near the barbecue, you need to cover the wooden walls and floor with a metal sheet, and treat the entire gazebo with flame retardant;
• Susceptibility to rotting - the structure should be impregnated with warm drying oil and painted with oil paint or varnished. Every year you need to do an audit: check the condition of the tree, and repaint the damaged areas.

Thematic material:

How to assemble a metal frame

It is also quite simple to build a gazebo from metal. You will need a welding machine and the ability to use it.

The lower trim is made of a metal profile 10 × 10 cm. The supports are attached to concrete with anchors or welded to reinforcement sticking out of the foundation, and vertical posts to them. For reinforcement, metal corners are attached to their lower and upper parts.

The rigidity of the structure is given in the same way as for wooden buildings - with inclined beams and re-binding. The base for the roof rafters is welded to the top of the racks.

The metal also needs protection from the harmful effects of the environment. After all, he is afraid of moisture and is prone to corrosion. Therefore, all metal parts are primed and painted.

If the owner decided to do it, in which they will fry kebabs in winter, then the metal frame is sheathed. Siding can be fixed outside, and wood or plywood is suitable for interior decoration. There is plenty of room for experimentation and imagination.

Thematic material:

You just need to remember about the flammability of some building materials. They should be protected from sparks from the stove. It is very easy to insulate such an arbor - mineral wool must be laid between two layers of sheathing. Then no cold is terrible!

Pergola made of brick or stone

Of course, the construction of a stone gazebo is rightfully considered the most costly and time-consuming. But it is the most durable and durable, besides, you do not need to constantly monitor the condition of the masonry, because it is not afraid of either rain or snow.

A brick is laid on the strip foundation after the insulating layer, in accordance with the project. It can be a building of four columns with a roof or a structure of one wall, which has a stove and a cutting table. And you can fold the whole house with windows and a door.

Roofing - the final stage

The roof of the gazebo should match its general style, be light and functional (protect from rain and sun). Any configuration will do: pitched, ridge, tent, oriental and many others.

To install a brazier, it is necessary to provide a hole in the roof for a chimney. It is good to make a metal umbrella over the pipe - it will protect from rain, and barbecue can be fried in any weather.

supplementary article:

Roof lining material should be lightweight. That's all the requirements for it. Can choose:

• flexible tiles;
• metal profile;
• sheet iron.

It is more convenient to assemble the roof tent at the bottom, and then raise it and install it in place. But you will need a lift. If there is no such device, the roof is assembled from above, on the rafters.

How to make a stove or barbecue?

It is easy to weld a brazier for frying kebabs from thick sheet metal, this does not require special skills. Such a device is often made portable. You can install it in an existing gazebo, and in a newly built one.

There is a variant of its brickwork, for which a rectangular base-cabinet is being prepared. Its width should be less than the skewer, and the length will be enough about 1.2 meters. The height of the cabinet is about 0.8–0.9 m, this value depends on the growth of the owner.

Complementary material:

Such a brazier can be built at the stage of building walls, providing a smoke exhaust system and supplying it with an exhaust hood or a pipe in the form of a dome.

A (solid) rectangle of refractory bricks is laid out on the base - it is not cemented. The stones of the sides are also laid, without connecting them with a solution, which will greatly facilitate the process of cleaning from the ashes.

It is more difficult to build a real stove; some professional skills will come in handy here. The main thing is to provide the hearth with its own, separate from the general, foundation. The oven should be assembled immediately after the concrete has hardened; it can be erected simultaneously with vertical supports.

You need to remember about the chimney, which in summer terraces is often made instead of one of the columns. It is better to build a firebox from thick metal, so it will be more convenient to maintain it.

The correct design of the chimney, dampers, hoods is important. They support the flame and help the fuel flare up - they create traction.

Regardless of the chosen option for a gazebo equipped with a stove, its construction will take time and material costs. The entire project must be analyzed at the initial stage and an estimate should be made so that the terrace does not turn into a “long-term construction”. A competent approach to business - and independent construction will become a pleasure, and the result - a source of pride!

Several interesting projects

Photo: combined type (wood, brick)

Photo: stylish project - southern version

Video: building a gazebo with a do-it-yourself stove

A durable and beautiful building on a summer cottage - a gazebo with brick walls. In order for the design to meet these conditions, it is necessary to follow simple rules when erecting a fence.

1. To withstand dressing during the construction process. This means that the vertical seams in two rows in a row do not match. A half-brick wall for a gazebo is usually sufficient.
2. Perform reinforcement. For reinforcement, class B1 wire with a diameter of 3 mm is used. Reinforcement is carried out with individual rods. You can use a welded mesh. The wire is embedded completely in the solution to avoid corrosion. Every 5th row of masonry is subject to reinforcement. Particular attention is paid to the corners of the building.

By following a simple instruction, remarkable results are achieved.

The gazebo with barbecue and barbecue in the photo below is made of wood and does not have load-bearing walls. The table and chairs are matched exactly to the style. The convenient location of the stove allows you to sit at the table to look after the preparation of meat and vegetables. Lanterns are installed on both sides of the structure so as not to interrupt the meal even in the dark. It is worth noting that this option is not suitable for winter gatherings, especially in snowy or windy weather.

But this option can already be a place of rest in winter days. The design is made in such a way that you can hide from snow flakes and taste food in the fresh frosty air.

The next variation of the gazebo with barbecue and barbecue is attached directly to the house. This has its advantages: you do not have to run far to the refrigerator for food and drinks, as well as other necessary items.

The design for the suburban area in the photo below is able to protect you and your company from sudden bad weather: be it rain or snow. The circular version looks very stylish if there are other building elements made in the form of a circle on your site. It can be ponds, fountains, woodcutter and so on.

And here is the project of a gazebo with barbecue and barbecue, which visually divides the structure into 2 zones:

• food preparation area;
• dining and relaxation area.

The unusual design of the roof and white arches give the building a special and unique style. A great option for summer gatherings in the fresh air.

The summer barbecue gazebo, the photo of which you see below, is located, as it were, on the second floor. This was done with the help of foundation blocks and a wooden staircase. Agree, it looks unusual.

There is also an option for those who, for some reason, do not like the location of the barbecue oven directly inside the wooden structure. Such a project brought a small bonus: the installation of a water tap between the stove and the gazebo. Convenient and multifunctional option.

If you are relaxing with a large company in which there are children, then it will not be superfluous to equip a platform near the gazebo. So parents can relax inside and children can play outside. Due to the absence of load-bearing walls, adults can watch them without looking up from their conversations and meals. The project of such a gazebo for a barbecue in the photo:

You can also build an unusual entrance to the gazebo. Mythical figures of people or animals will add a fabulous atmosphere to a wooden building.

The following example of a very compact construction of a summer gazebo with barbecue and barbecue. Opposite the stove is a round table and chairs made of wood. Here it is necessary to provide a proper chimney so that the smoke does not fly into the faces of vacationers.

A small waterfall will be a bonus.

Finding a recreation area near fire and water at the same time can be considered a doubly pleasant pastime. Ways to reproduce such a project of summer barbecue gazebos in the photo: