Options for tiling inside the fence. Facing the fence with tiles - the harmony of landscape design. Stone cladding tiles for fence

From a fence made of stone, it smells of reliability and respectability. However, a solid stone fence looks somewhat rough and massive, so they can be an excellent solution. Pillars and plinth made of stone in combination with corrugated board, picket fence or forged metal give the fence solidity and high cost without heavy gloom.

An example of natural stone fence posts

Material for stone pillars can be of natural and artificial origin.

natural stones

Natural stone is expensive, although some varieties, for example, cobblestone, can be looked for on your own, and you can do the laying of pillars with your own hands.

The process of installing stone pillars for a combined fence

The following types of stones are used for the fence and pillars:

In general, natural mineral fence posts can be installed even cheaper than brick bases. But having decided to take up laying the stone with your own hands, you should know that this process is long and laborious.

Types of masonry

A stone of natural origin cannot be of the correct and standard form, so working with it will require patience and creativity. varies depending on the source material.

Construction of natural stone pillars

It is best to start building a fence in summer in dry weather so that the cement compositions harden faster. For pillars, fairly smooth stones of medium size are best suited. Under fence posts made of stone is needed.

Foundation arrangement

Masonry pillars made of natural stone with formwork

The most common and convenient way to build fence posts is to use sliding formwork.

The process of laying stone in a special formwork

To work, you need to assemble two low boxes from boards with the required dimensions.

Stone laying without formwork

Another way to build a pillar with your own hands is masonry without formwork. The stones are located directly around and fastened together with a thick cement mortar.

The largest stones are used for the bottom. The inside of the column is filled with cement with fine gravel.

You can lay out no more than two rows at once. After the mortar has set, laying continues. It is advisable to wipe the cement from the front with a wet cloth immediately, without waiting for the solution to dry.
When laying, you need to carefully monitor the size of the pillar and its verticality. Fasteners for transverse lags, located approximately in the third row of masonry and in the middle of the column, should protrude well beyond the stone base.

Scheme of a fence device with stone pillars

After the masonry is completed, the seams are embroidered and a protective and decorative cap is fixed, which will protect the fence post from precipitation.
Both laying methods require time and accuracy. But if you show great desire and patience, you can build beautiful and durable fence posts with your own hands, which will become a reliable support for the fence and a wonderful decorative element.

A beautifully designed fence of a country cottage is not just a fence that performs basic protective functions. Currently, it is an integral part of the landscape design of the backyard territory, and in some cases - its crown. Particularly popular with owners of private houses is decorative cladding in the form of tiles, the color and material of which is selected depending on the individual characteristics of a particular object.

Facing hinged tiles are ideal for finishing fence fences made of foam blocks, gas blocks, monolith and other structures similar in structure with a uniform solid surface. In those situations where the main part of the fence is made of wood or metal, facade tiles are used to decorate inter-fence posts, columns and bases.

Varieties of facade tiles for fences
On sale there is a wide variety of natural and artificial finishing materials, with which you can transform the fence and give it a unique appearance. Depending on taste preferences and financial capabilities, owners of country houses have the opportunity to choose a suitable cladding solution and combine it with other facade decor. Currently, there are several main types of tiles:
ceramic and porcelain stoneware;
glass and polymer;
from natural and artificial stone.

Each of the options listed above has its own distinctive features, advantages and disadvantages, so before buying, you should carefully read the technical and operational characteristics of the selected model.

Application and properties of ceramic tiles
Outdoor ceramic slab is an expensive building material, the surface of which can be made in different colors. In the production process, each element undergoes a firing procedure, due to which its upper layer is strengthened. To prepare the surface, experts recommend using a concrete mortar or glue. Fixing parts is carried out using a special tile adhesive that is resistant to temperature extremes and moisture. Most often, pillars are lined with ceramic tiles to visually distinguish them from the background of the main fence. Suitable for these purposes: cotto, mosaic, terraglia, clinker tiles. The final choice depends on what kind of effect you want to get in the end. The positive qualities of the material experts include practicality, strength and durability. The protective coating helps to preserve the original color of the product, prevents clouding and fading of the background.

Distinctive features of porcelain stoneware
Porcelain tile is a modern modification of classic ceramic tiles. The production of this type of finish consists in mixing two types of clay to a homogeneous consistency, after which the resulting solution enters the press and is exposed to high temperatures. Double firing gives the material rigidity, resistance to natural destruction, the influence of climatic conditions and mechanical damage.

Porcelain stoneware is available in various shapes and sizes, so it is preferred to be used for finishing complex structures. The decorative surface of the outer cladding can be of several varieties:
matte, semi-matte, glossy or glazed;
smooth, rough or embossed;
monophonic or multi-colored;
with a pattern or imitation of natural materials.

The appearance and functional qualities of the products resemble ceramic tiles, so the process of their installation is largely similar. The only difference is a slight superiority in weight category and price.

The relevance of facade tiles made of glass and polymeric materials
Facing the fence with polymer-based polymer tiles is a fairly rare occurrence. Glass fences in Russia are even rarer. If the first option scares away with its lack of practicality, then the second - with the high cost of the material and the high cost of installation services. However, glass fences are in high demand among the wealthy segments of the population due to their unique properties and spectacular appearance. A wide range of colors, shapes and sizes create endless scope for creativity.

Landscape designers also appreciate glass for its many other equally attractive qualities. Among them are:
practicality (the surface does not require special care, does not absorb moisture, does not fade under the influence of UV rays);
preservation of the original shape (no deformation, resistance to cracks and chips);
inertness to sudden temperature changes (refractory and frost-resistant);
durability (the service life of high-quality glass tiles is practically unlimited).

Products can have a flat, convex or concave shape. The combination of several options allows you to create a unique design that matches the general concept of decorating a personal plot.

Advantages of artificial stone fence panels
Finishing the fence with brick and stone tiles is considered the most cost-effective solution in terms of price and quality. The panels exactly repeat natural stone, and of different types, as well as brickwork, almost indistinguishable from the real one. Affordable price allows you to make a fence lining without any special costs, and the quality, beauty and durability of artificial stone panels is the same as that of natural counterparts. So economical buyers prefer artificial stone, the appearance of which is difficult to distinguish from the original. If you line the fence with artificial stone, it will reduce noise well and give the site a beautiful look.

The fence around a private house is a kind of calling card. By the decoration and beauty of the fence, one can judge how wealthy its owner is, therefore the construction and decoration of the fence are very important.

Through the use of a variety of decorative coatings, you can transform the appearance of the entire structure. Anyone who plans to enclose a site with a fence should understand that the reliability of the structure directly depends on how strong its support is. With properly installed posts, the fence will last a long time.

Types of poles for arranging fences

If earlier it was not possible to choose fence posts, now everything has changed. Everyone chooses what support he needs.

wooden poles

Rarely used today. The main reason is the short service life. However, you can extend their lifespan for a while. If the supports are processed, they will become more resistant to decay and pests. The first processing procedure must be carried out before the pillars are dug into the ground. Then every year they will have to be further processed.

In the role of supports, it is better to use logs of coniferous wood. But the use of timber, even having a large cross section, is impractical, since it does not have a layer protective against decay. In terms of rotting resistance, larch has the best performance. You can also use oak logs.

To slow down the decay of a wooden support in the ground, you can install a steel pipe on the bottom of the log. Thanks to this, the wood will not come into contact with the soil. You can also fix the pole with clamps to a steel stepchild recessed into the ground.

metal poles

Their average service life is 50 years. Under the pillars, you need to take professional pipes, pipes with a circular cross section are also suitable, the wall thickness of which is from 2 mm, and the diameter is from 75 mm. Profile pipes must have a cross section of 60x60 mm.

Before installing metal pipes, they must be cleaned of corrosion and must be treated with an anti-rust compound.

The lower part of the support needs to be plugged with steel thrust bearings. It will not be superfluous to apply bituminous mastic to the lower part of the pipe.

concrete pillars

Their service life is not less than that of metal supports. The main disadvantage of such products is a lot of weight. In order not to spend money on the purchase of concrete supports, you can make them yourself:

• put together a formwork, the dimensions of which are identical to the dimensions of the future support;
• line the bottom and walls of the box with polyethylene;
• lay the reinforcement grid;
• pour concrete. It is better to give preference to a quality brand of concrete, for example, M300. To improve the moisture resistance of the solution, it is better to add a plasticizer;
• after a week, the support must be removed from the box.

Pillars can be dug into the ground after a month.

brick pillars

The installation process of such supports is quite long and laborious. For such a support, it is necessary to use a facing brick. Before mounting such structures, it is necessary to pre-install corners or pipes in the formwork.

In the process of laying bricks, a solution of cement with sand is used, in a ratio of 1: 3. You need to build pillars in turn: each support can be laid out no more than 50 cm per day.

The gap between the bricks and the corner should be filled with cement mortar. It is also necessary to reinforce each row of brickwork using reinforcing tape.

Drawings when installing a fence

Is it necessary to draw up drawings when constructing fences with poles? If the design is not placed temporarily, then the drawing is required. You can’t do without it if the fence is planned to be metal with prefabricated sections.

Also, the drawings will be useful when installing the picket fence, if the upper edge of the section is planned to be wavy. The drawing will help calculate how much material is needed to complete the work.

It is not necessary to design every section of the fence, the drawing may include the entire structure. You can depict the project of one column, one section. When designing gates and gates, it is also necessary to draw up drawings.

If you make all the calculations in a timely manner and mark them on paper in the form of a diagram, then the fence device will not become a problem.

Pole installation

Now more and more often you can see fences, sections of which are made of corrugated board. This material is modern and quite durable.

First of all, you need to mark the area. At its corners, you need to install pegs, between which to pull the cord.

If the sections of the fence will be held on metal, concrete or wooden poles, then it will be enough to dig holes for their device. Their depth should be below the freezing point of the earth.

At a minimum, the supports should be covered with soil by a third. Metal poles can simply be driven into the ground, after making holes in the ground that have a smaller diameter than the cross section of the support.

Pits intended for poles should have a diameter of 15 centimeters more than the diameter of the poles. At the bottom of the pits you need to pour sand, after which, using the level, you can put supports with welded spacers. They are fixed in a vertical position, after which the pit is filled with stones, over which concrete is poured.

Two options for arranging brick supports

As for brick pillars, only a reinforced concrete foundation can be their support. Brick fence posts are connected to each other by a strip foundation. The width of the foundation tape should be similar to the thickness of the pillar.

But another option is also possible: the foundation for the pillars can be made of the desired width, and the foundation is already being laid under the sections on a compacted cushion made of sand or a sand-gravel mixture.

If the site has irregularities, then it is better to make the concrete tape embossed, that is, so that the base is stepped.

After the formwork is installed, the reinforcing frame must be lowered into the trench. It is needed to give greater rigidity to the foundation. After mounting the formwork, it is necessary to install corners or pipes under the brick pillars. The optimal distance between brick columns is 2.5 meters.

Fastening sections of corrugated board

So, the pillars are ready, then you need to install the lags. A professional welder should make the frame, since the quality of work depends on how reliable and durable the structure will be. The logs must be welded in two rows, and they must be parallel. The finished frame is coated with a primer, then it can be painted with a special paint.

After installing the lags, you can fix the corrugated board. For this, self-tapping screws are used.

When all sections are ready, you can install the gate. For their manufacture, you will need a profile pipe of the same size as the pipe for the frame. From it, the section necessary in shape is welded, on which the corrugated board must be fixed. If you have drawings at hand, then there will be no problems with installation.

Using fence tiles

You can decorate any fence with tiles. It can be made by mixing cement, clay and sand. In the production process, you can make tiles of the desired shape, which is very convenient.

The use of tiles for cladding has its advantages:

• not afraid of temperature fluctuations;
• has increased moisture resistance;
• has a long service life.

It is also possible to use tiles for cladding. It can be porcelain stoneware or marbled. The use of such tiles guarantees the presentability of the appearance of the entire structure.

The fence around the house is quite important and for the most part a very important element. Especially it is necessary to protect the territory from intrusions.
In addition, the fence allows you to clearly mark the boundary of the site and, of course, decorate it in one style or another. That is why for construction it is necessary to choose a material that can meet all these requirements.
Therefore, facing the fences with stone becomes the most suitable, because in this case they turn out to be reliable and beautiful at the same time.

Despite the fact that the facing stone for fences is a fairly strong material, it is not always chosen for the design of the site fencing. The fact is that most often such fences seem to the owners of houses rather gloomy, gloomy.
But this opinion is erroneous, since at present an artificial stone for facing a fence can be represented by completely different types.
So, you can choose for your site such stones (or their imitation), as:

• Granite,
• Marble,
• Limestone,
• Shell rock and much more.

Depending on what material the frame of the fence is made of, which should be finished with stone, you can choose either natural or artificial material, which will show that the fence is lined with stone.

For reference. So, if you have already installed a brick fence in your country house, for example, which has lost its attractive appearance, then it will be able to withstand natural stone. If the frame is made of metal, then it is better to resort to using all kinds of imitations.

Brick fence: stone cladding, instructions and requirements

In the process of facing with stones, difficulties usually do not arise. The main thing is to do everything correctly and follow the recommendations of a specialist.
So, for example, when fixing natural stone, the following requirements will need to be taken into account:

• The thickness of the stone should be no more than 3 mm.
• Stones must be clean, free of extra inclusions and impurities.
• The surface to be treated must also be clean.
• If the facing is carried out no higher than 150 cm, then only fastening with glue is sufficient.
• If the stone lining of the fence is higher than 150 cm, then additional hooking will be required.
• If the height is less, and you use stones with a thickness of more than 3 cm, then hooking remains mandatory.

So:

• Initially, you will need to pick up stones. The fence can be lined with artificial stone or natural material.
• The most popular is the use of ordinary natural stone, which, at times, is available in every yard, facing the fence with natural stone is more expensive and requires more time.
• Therefore, if you observe a similar phenomenon on your site (or somewhere near your home), then half the battle has already been done. Having collected the required amount of material, you should proceed to the design of the fence.

Note. To do this, you need to disassemble the existing stones and (you can directly on the ground or in the back room) lay them the way you like.

Here everything is subject to your imagination and your taste:

• You can simply make a slide in which large stones will be laid on the bottom, and small ones on top.
• You can be original and put the stones in the opposite order.
• Sometimes there is a random arrangement of stones, which is more reminiscent of a natural stone fence.
• Often the design depends on the color scheme of the stones. So, you can make it colorful or monochrome. To do this, you will have to divide the stones by shades into several groups, and then arrange them the way you like.

Stones can be:

• sawed off.
• upholstered.
• Chipped, and even crumbled in some places.

Sometimes, in order to properly position the facing stone for the fence with your own hands, it is recommended to use photo or video instructions. They will certainly help even those who have never encountered these events in their lives.

Preparing the fence frame and facing the pillars with stone

So, having prepared all the finishing materials for facing the fence, you will need to stock up on both tools and additional materials.
In order to make fences from facing stone, you will need:

• A hammer,
• Chisel or chisel
• Tile adhesive for outdoor use,
• construction mixer,
• Electric drill,
• Putty knife,
• reinforcing mesh,
• Wire,
• screws,
• dowel,
• washers,
• cement mortar,
• grout,
• Water repellent solution.

For reference.
It consists of 1 part cement, 3 parts sand, 1 part water. You need to mix it all up gradually.
First, cement is dissolved in water, then sand is added. You can add a plasticizer (about 75 grams) in order to remove excess moisture from the solution.
In this case, your fence will not be afraid of any frost.

• The plasticizer is added immediately after the cement dissolves in water. In this case, you may need even less water, since the plasticizer will do a great job of thinning the solution.
• In order for the stones to adhere well to the plastered wall, it is recommended to add a coarse-grained filler to the cement mortar.
  With it, the wall of the fence will become rough, respectively, and the glue will stick to it much stronger and better. After that, it is necessary to leave the fence for about 1 day in order for the plaster to dry.

As soon as you make sure that the cement mortar has already hardened, you can go to the finish line - fixing stones, for this you will need:

• Tile adhesive for outdoor use,
• Cement,
• Sand.

Carrying out work:

• All this is mixed in a ratio of 1:1:2. Add water by eye, depending on the quality of the sand.
  Gradually kneading the solution, bring it to the consistency of very thick sour cream. The solution should slide off the spatula very slowly, but not fall or run off it.

For reference. If the stones are too large, and the fence is supposed to be made high enough, then the pins should first be driven into the fence, and holes should be drilled in the stones.
Then the stones will simply sit on these hooks. This method allows you to perform the cladding with the highest quality.

• The finished solution should not be applied to the fence, but to the stones, which are alternately pressed against the surface to be treated.
• Stone laying starts from the bottom. If necessary, the stones can be sawn off or broken to fit on the fence.
• At the same time, carefully monitor the gaps between the stones. They should not be pressed close to each other. The optimal distance between adjacent stones is 1.5 cm.
• After that, you only need to wipe the gaps between them. For this, a special grout can be used (in this case, its color can be selected in accordance with the shades of the stones) or, if you have glue left, then you can use it.
• In conclusion, it remains only to wash the stones from the cement-adhesive mortar and cover the finished fence with a water-repellent solution that will protect it from moisture.

If the fence is lined with artificial stone, then everything is somewhat simpler here, because for the most part imitations have much less weight and therefore can be used on absolutely any surface. Here you do not even need to mix cement with sand to ordinary tile adhesive.
Accordingly, the price of a fence lined with artificial stone will be significantly lower than that which was decorated with natural material.

Pillars (imitation of brick) are a very special high-quality finishing material that is ideal for decorating a fence post. Such material is known relatively recently, but literally immediately managed to acquire great demand among the owners of private houses and luxurious mansions.

Brick imitation panels will help to significantly reduce the time and labor costs for building a fence.

Due to the special simplicity of the structure being erected, you do not need to contact experienced builders for installation, so it is quite possible to carry out all installation work yourself, using the most common construction tools.

The panel imitating a brick pillar is made of very good quality polypropylene. Such a finish is distinguished by the fact that it does not lend itself to the negative effects of the environment and is made from ecological, natural materials.

The outer layer absolutely repeats the size, shade, seams of natural brickwork.

Pix panel has excellent technical characteristics and high strength materials.

Panels that imitate brick are characterized by the fact that their shade absolutely repeats the texture and color features of ordinary brick. The main technical characteristics of such material are:

• small weight and dimensions;
• different temperature conditions of application;
• nice aesthetic look.

To increase the protective qualities, the panels are covered with a special paint. It perfectly protects the material from the aggressive influence of snow, rain and sunlight. In addition, the paint increases the resistance to fading and peeling.

The thickness of the pix panels imitating brick is only 2 cm, which makes it possible to cut the cladding very simply, without specialized equipment. Due to their high environmental friendliness, they can be used in absolutely any conditions, while the materials do not emit any harmful substances during operation.

Advantages and disadvantages

A panel imitating a brick fence post has both certain advantages and some disadvantages. One of the main advantages of such material is its reasonable cost. In addition, among the advantages it is necessary to highlight such as:

• ease and speed of installation;
• no need for special skills;
• installation can be carried out in any weather;
• keep a beautiful look for a long time.

Among the shortcomings of the material, it is necessary to note the difficulty of joining the individual components. This is due to the lack of the required models for the layout of the corner posts, so they must be made up of 2 panels.

In addition, a pole made of polypropylene does not guarantee long-term shape retention in case of damage or high loads exerted on the product.

Carrying out preparatory work for installation

Panel pix is ​​a high-quality imitation of a brick pillar, easy to install, so everyone can handle the cladding. You can mount finished elements with imitation of ordinary bricks on one or, if desired, on both sides of the fence. It is quite possible to install panels only from the front of the fence, which makes it possible to save free time and money.

To mount pix panels, you will need tools such as:

• 2 corners;
• self-tapping screws;
• screwdriver;
• construction roulette.

To carry out the facing with pix panels, it is initially necessary to carry out markings at the mounting points of the pillars at a distance of 3 m from one another. Then you need to install two corners in predetermined places.

Mounting pillars with imitation bricks

Corners to the prepared fence canvas must be fixed, this can be done using:

• self-tapping screws;
• rivets;
• bolts.

Corners are attached to wooden racks using self-tapping screws designed for woodworking.

A visor with several functions must be installed on the outer area of ​​\u200b\u200bthe panel.

It is intended for additional protection of the inside of the panel from snow and rain.

It also guarantees sun protection. The first finished panel with an already installed visor must be attached to the corners strictly along the height of the fence. Moving step by step down, you need to connect all the remaining components to each other using special locks, and attach pillars to the corners using self-tapping screws.

If the bottom panel does not fit in height, then it can be cut a little. Particular attention must be paid to the direction of the required connecting parts of the column. You can cut off excess parts of the working material using the most ordinary scissors designed for working on metal, or with a simple grinder.

After installation, it is necessary to wipe the surface of the installed column with a damp cloth. Peak panels are sometimes used to decorate a metal fence post to which the rest of the fence is attached. Installation work is carried out in the same way as when installing fence posts.

//www.youtube.com/watch?v=9zR3GPVEpzA

Pix panels are simply mounted and easily disassembled. They can even be used several times without compromising their appearance. Using brick imitation panels is a good opportunity to get an aesthetic, reliable, well-designed and affordable fence or a modern beautiful fence.