Control unit via gsm channel. Multifunctional control device and control via GSM channel. Possibilities of controlling the heating system using a set of equipment with the Internet gateway Salus iT500

wifi remote switch- This is a power outlet with remote control via the Internet. The outlet power socket can be turned on and off remotely using commands transmitted via a conventional smartphone, as well as on site, with a simple push of a button. The device is a smart device that can be controlled from a smartphone anytime, anywhere.

The control software for iPhone, iPad or Android devices can be downloaded for free from the app store:

Wi-Fi socket Wi-Fi socket allows you to control any device connected to the device connector remotely via the Internet.

Characteristics:

Rated voltage: 220 Volts

Operating temperature: -20……+50 Gr.

GSM socket with temperature sensor.

This is a remote controlled power outlet. The outlet power outlet can be turned on and off remotely via SMS commands, or locally with a simple push of a button. The device is an intelligent device that can be controlled from a mobile phone anytime, anywhere.

GSM remote switch can provide power control for loads up to 2000 W at home or in the office. It fits into any household power outlet. GSM remote switch allows you to control any device connected to the device connector remotely via the GSM network.

An optionally connected thermal sensor allows you to turn on or off the power supply at the output of the device, depending on the ambient temperature. This function allows you to control the heater or cooling unit to keep the ambient temperature within the set range or at the set level.

Moreover, if the GSM socket detects a rapid change in the ambient temperature or reaching the pre-set temperature level for notification, an SMS notification will be sent to the owner's mobile phone.

The GSM socket is designed for home and office use. It is NOT designed for industrial use, especially in wet and dusty environments.

Contents of delivery

GSM remote switch, 1 pc.

Thermal sensor, 1 pc.

Passport, 1 pc.

Packing, 1 piece

Main functions

The outlet uses a SIM card.

Remote control of the socket is carried out by simply sending SMS commands.

Input: 110-250V/50Hz.

Output: max. 16 A continuous.

Relay: 20 A/250 V relay with two working states (on/off output socket).

Button: manual control on/off. exit.

Delay output control.

Automatic work according to the set schedule: on/off. exit at the specified time.

Connecting an external temperature sensor and sending a notification about a temperature change in a given range to a mobile phone via SMS.

Automatic temperature response: This function allows the heater or cooling unit to be controlled to maintain the ambient temperature within a predetermined range or at a predetermined level.

SMS alert on rapid temperature change or when the set point is reached: if the GSM socket detects a rapid change in the ambient temperature or reaching the preset temperature level for alerting, an SMS notification can be automatically sent to the owner's mobile phone.

Supports up to 5 mobile phones.

With the help of remote control via GSM, you can control the heat in a country house, no matter where you are in the country. The presented system is designed to control stationary individual units. It is also needed to control heating. The system works through the use of a mobile phone.

As a rule, the control module is installed in an electric boiler. Finding out information about freezing and defrosting the unit is easy. To do this, you need to connect the module directly to the unit. Then you should bring the temperature sensor to a place convenient for measuring this indicator. If the temperature characteristic begins to change within the limits you specified, then a message is automatically sent to the mobile phone indicating the change.

Boiler control via GSM: features

The controller allows you to monitor the operating status of the boiler. If necessary, the remote device makes it possible to start the unit or stop its operation for a while, change settings and modes.

If there is a mobile phone, a person receives a notification that the control is out of order or works at an improper level. Such a system is the most convenient and simple for most users. Controlling heating is the main function of the equipment. However, in addition to it, GSM technology has additional features, including notifications by writing a message, as well as voice dialing. The latter function, as a rule, notifies about the operation of some sensors that are connected to remote equipment.

The main devices include:

• glass break sensors;
• vibration;
• indicating that there has been movement in the boiler room;
• smoke, the appearance of water in the boiler room;
• excessive pressure;
• gas leaks;
• alarms;
• announcing the doorbell.

Unit control options

A gas or electric boiler is a complex system that should be checked regularly. Wireless monitoring is the best way to monitor the machine. The system allows you to change the main parameters and settings if you have the Internet and a connection. The GSM remote device allows you to change the temperature characteristics of the coolant and directly in the room, the power and mode of operation of the module.

Cell phones that run on Android or are Apple technology have special programs that make the device management process as convenient as possible.

With the help of GSM, you can monitor the safety of the boiler. The advantage of the program is that it is wireless. Boiler control can only be installed by a specialist who has certain skills and abilities.

GSM wireless controller: advantages

They monitor the safety of heating from several mobile phones that have access to a particular installation. Only up-to-date data on a gas or electric boiler is sent to smartphones.

If necessary, using GSM, you can reduce the temperature of the coolant or this indicator in order to save money. In severe frosts, it is possible to increase the characteristics of heat in the rooms. If there is a malfunction in the boiler, you will immediately be sent an alert via the Internet.

Even if the power supply is cut off in the building, you will be able to monitor the operation of the boiler. Installing GSM is relatively easy if a highly skilled worker handles the settings.

Advantages of our company: management for optimal cost

Wireless units are in demand in the modern world. If you want to purchase high-quality GSM control, please contact our company. Specialists have been working for many years, so they have the skills and know the features of the functioning of the units.

We work efficiently and quickly, do not take your precious time, make heating safe and comfortable. As for the cost, the company's pricing policy varies within reasonable limits, depending on the features of the GSM settings, the required deadlines for completing the task.

If you need GSM control right now, call the contact phone number listed on the site. Managers will inform you about the boiler and control over it, devote to the details. 0ni will talk about the features of management and operation.

Andrey Viktorovich

I have been using your device KSITAL GSM 12T for 3 years now.
The device is mounted in a metal box together with automatic power supplies and three solid-state relays. An electric boiler with a total power of 6 kW is connected to the device through the already mentioned solid state relays. Everything works just fine and no complaints.
I got the impression that YOUR company has a very rare quality today - YOU work for people.

Aleksandr Vladimirovich

Good afternoon, dear Xital developers! We have been using your product for a long time. The latest version has many new useful features and options for customization, for which many thanks.

Anatoly Borisovich

Good afternoon, dear developers! My name is Anatoliy. I want to say right away that the equipment developed by your company, in my opinion, works for a solid "5"! (Except for some minor flaws, but they are not significant). The first time I encountered him was when it became necessary to control the temperature in the refrigerators intended for storing the vaccine in one of the healthcare institutions. The administration of the institution was satisfied and the employees directly responsible for the temperature regime of storage of drugs, too. After some time, there was a good experience of installing the gsm-controller KSITAL GSM-12 as a burglar alarm in a private house (with the ability to control an electric boiler, as well as using various additional third-party sensors connected to security zones) ... In general, it turned out inexpensive "smart home", though it took a lot of time!
In general, I want to repeat: the equipment works very well! So, after these several cases of installation of equipment for gsm-monitoring systems "Ksital" I can draw an objective conclusion: that these devices are really reliable helpers in cases where it is necessary.

Andrey A.A.

For more than 3 years I have been professionally installing the Xital system for people and do not plan to change it to another, although I could master another one according to my qualifications. But, this is not necessary.
The basis for this conclusion: high reliability and stability of the system, provided by many years of experience of its developers, qualified technical support, attentive, and also my rather deep knowledge of this system.

Sergei Tatarinov

A good system that covered all my Wishlist. I control the boiler and use it as an alarm. Gas and smoke leakage sensors work without problems with the system. The extension block solved security and control issues with the buildings on the site.

Sergey Dorokhov

I looked closely at Xital for a long time - I chose analogues, compared with other manufacturers, but I stopped the choice on it and did not regret it. Their products are truly the best on the market right now. In terms of quality, stability in work, no one surpasses Xital. And ease of installation is another plus in karma. There are also Russian manufacturers that you can be proud of, and xital one of them

Andrey Malinin

I installed Xital a year and a half ago. For all this time - pah-pah, no complaints. Works stably, no failures and glitches were noticed. Due to the nature of the service, I often have to travel on business trips, and I need to monitor the operation of the heating - my wife, unfortunately, with the equipment is not only not for you, but not even for you ... :) Therefore, the gsm module from xital became my salvation. Now I plan to buy the same one for my parents. Recommend!

We bought the system for our house 4 years ago. I really liked the ability to control and manage the boiler, security functionality. I did not expect such a wide application and versatility. Over time, I used all 3 relays (boiler, watering, bath). This Xital is a very reliable thing. It is possible to receive a daily report. Control of electricity in the network. I really like the mobile app. I recently reflashed the system and now there is the possibility of online monitoring at home. The system can do a lot, the main thing is to turn on the head. For all the time there was only one problem, it was decided by a call to technical support. I no longer worry about my home and property.

"EctoControl" is a remote monitoring and control system using a phone and a PC using GSM and Wi-Fi communication protocols. Allows you to connect wired and wireless sensors and instantly notify up to 10 subscribers about alarms. It is possible to record sensor readings for several days. Great for monitoring parameters in country houses and server rooms.

• Notification of any critical changes by SMS or phone call
• Sending data from all sensors on request
• Work with a personal account on the Internet and applications for IOS and Android
• 220V network presence control
• Connection of wired and wireless sensors: up to 67pcs
• Built-in relays for equipment control (220V 3A) - 3pcs
• Connection of external control modules: yes

Here are the main characteristics of the system. You can download all system parameters below.

Internal relay channels3 independent channels

Offline time:Up to 24 hours (complete battery), up to 7 days (7Ah battery)

Dimensions without fasteners:1 year warranty and technical support

Main unit dimensions227MM x 161MM x 37MM

Signal cable length:Quick Start Instructions, Full Manual, Warranty Card

Maximum number of alert phones10 numbers

Manufacturer: Ektostroy company (Russia)

System operating temperaturefrom -250С to +500С

Temperature range of temperature sensorsfrom -40С to +99С

Temperature sensor accuracy0.5-10C

Scheme of work

Important: only the set of the EctoControl main unit is described in the package.
Selected sensors will depend on the selected configuration

EctoControl main unit

External remote antenna

Adapter

For electric boilers: take advantage of favorable nighttime electricity rates by heating your home at night in day/night mode

External battery 1.2Ah

Use favorable nightly electricity rates by heating your house at night in the mode For electric boilers: use advantageous nightly electricity rates by heating your house at night in mode.

Documentation

For electric boilers: use advantageous overnight electricity rates

Sensors

Sensors depend on the selected configuration

EctoControl system

GSM control system for electrical appliances and heating in the house

Protecting your life, relatives and friends, as well as property is a matter that worries everyone. Since the development of technology does not stand still, GSM control of electrical appliances is now gaining particular popularity, which allows you to remotely control the operation of absolutely any electrical equipment.

Functional features

The control system consists of a GSM unit, an adapter, a set of sensors that allow you to control their operation via mobile communication channels, a powerful remote antenna. Maintenance of remote control sensors via GSM is not difficult - it is enough to mount them in the right places.

GSM control of electrical appliances and heating performs the following main functions:

• room air temperature monitoring;
• heating equipment management;
• socket management;
• network voltage control;
• alarm notification (SMS or call);
• sending on request or at a specified time data from all sensors;
• the ability to connect additional wired and wireless sensors.

How to purchase an electrical appliance control system

Our company offers individuals and business leaders to buy GSM control at an affordable price. Its cost depends on the configuration. In the online store, you can order wholesale and retail a complete system, as well as any necessary device separately, for example, a socket with GSM control or a gsm power management controller.

In addition, here on the site you can find a detailed description and technical characteristics of the device, download the necessary documentation for using and connecting the system.

If you have any questions, you can get additional advice, as well as place an order, with the company's managers online or by calling the numbers indicated in the contacts.

Don't waste your time. We are waiting for your calls today!

Special offer for objects with a large number of regular users (business centers, summer cottages, corporate parking lots, car depots).

Control of gates/barriers via GSM-channel.

Let's say you have a territory that can be reached through a barrier. You need to organize the entry of a large number of cars into this territory. To do this, you will need the barrier itself (which you can, of course, purchase from us) and some control system for it.

Let's take 200 cars for clarity - a normal number for an average business center. That is, you will have to pay several times more for one remote control than for equipping the checkpoint with a barrier. This means that we will have to resort to unpopular measures to extract money from people, which, as you know, are never superfluous, then distribute remote controls to everyone and everyone individually, which will naturally delay the process of automating the entrance.

But there is another way. Technology does not stand still, and a few years ago it became possible to control automation from a mobile phone, which everyone has today. After installing and configuring the special GSM-unit ESIM110 or ESIM120 (NEW) you can simply call the phone number of the SIM card installed in the unit, and the entrance will be opened. The setting consists in filling the block database with user phone numbers. If the number of the call coming to the block matches one of the numbers in the database, the gate opens. The call is completely free, because. the block immediately "resets" it.

For 200 cars, the savings are 180 thousand, which, you see, is quite good.

Oh yes! Even at the entrance you will need to hang a printed memo on which number to call to enter. :)

Control unit ESIM120

Recently, an improved version of the ESIM110 block went on sale - ESIM120, in addition to all the functions of its predecessor, having a number of modern features:

• Additional relay output (possibility to connect two devices at once)
• Open/close and turn on/off with the touch of a button on the smartphone app
• SMS-notification about the breakdown of the gate or other connected automation
• User classification for access restriction and control
• Limit on the number of users: 1000 (versus 500 for ESIM110)
• Compatibility with ELDES cloud server

A story about the ESIM110/120 system in a short video from the manufacturer:

SN automation is a pioneer in Russia in the field of gate control via a GSM channel. We have managed to gain a fairly extensive experience in using these modules, and for many of our customers the system has proven itself to be excellent for its reliable, efficient operation, ease of configuration and significant savings. Feel free to recommend to enterprises, homeowners associations, dacha cooperatives and other organizations interested in saving and having from 10 subscribers. ()