Wooden gazebo with polycarbonate. Arbor made of metal and polycarbonate: how to do it yourself. Creating a building frame

How pleasant it is to sit outdoors on a warm summer day, enjoying the coolness in the circle of family and friends.

Utopia, you say. No - I will answer, the happy owner of a garden gazebo made of polycarbonate.

The arrangement of a site or yard implies the creation of a certain level of comfort, one of the mandatory elements of which is a gazebo or at least a canopy.

Among all the variety of types and designs, a separate place is occupied by a garden gazebo made of polycarbonate or plastic (polyvinyl chloride) - light, transparent, ideal for giving, you can put it near or in the garden.

Benefits of a polycarbonate gazebo

low weight design. This means that it is not always necessary to pour a foundation under it. You can install it anywhere, and if necessary, move it to another place, dismantling only part of the structure;

opportunity to do it yourself. Of course, you can buy a ready-made gazebo. On the market, such gazebos are presented in all possible options. But, having made it personally, you will emphasize your individuality and take into account all the nuances of the climate, architectural design, soil and the general appearance of the site;

affordable cost of materials. Cellular polycarbonate is an inexpensive material. And the frame does not require the use of expensive profiles. As a result, its price will be lower than the cost of a wooden brick or wrought-iron gazebo.

possibility to combine. Polycarbonate goes well with any of the existing materials. And even if you use polycarbonate itself, you can come up with many finishes. This is due to the advantages of the material itself.

Advantages of polycarbonate:

polycarbonate is easy to cut;
bends well both along and across;
drilled without problems;
not afraid of high and low temperatures, as well as their sudden changes;
can be used in humid climates;
does not burn;
strong enough;
estimated service life of 20 years.
ideal material for light-transmitting structures. It has increased resistance to ultraviolet radiation and at the same time, it allows sufficient daylight to pass through;

Based on this, we see that there is no better solution for giving than building a polycarbonate gazebo.

Gazebos for summer cottages made of polycarbonate - types and types

Before we get started, let's figure out a little which gazebo to choose. There are several types and types of polycarbonate gazebos:

1. by type:

open;

closed;

2. According to the installation method:

portable;

stationary;

3. according to the complexity of the design:

can be a light canopy;

and can be made in the form of a complex structure;

4. according to the level of equipment:

gazebos with or without barbecue;

5. according to the function performed:

carrying a functional load;

performing, among other things, a decorative function - decorations for the garden.

In shape - rectangular, round, square oval or polygonal.

Appearance determines the complexity of installation and the required material.

Construction of a polycarbonate gazebo

A very common approach to the manufacture of a homemade gazebo is the construction of a metal frame from a profile and the subsequent sheathing of walls and roofs with polycarbonate. At the same time, the wooden beam is not much inferior in popularity. It all depends on preferences and the specific task.

How to make a polycarbonate gazebo with your own hands?

The answer to this question is contained in this detailed step-by-step instruction manual for the manufacture of a closed stationary gazebo.

Design work

1. We determine the installation location, taking into account the following factors:

the presence of a slope;
the presence of irregularities on the surface;
Rose of Wind;
shrubs and trees growing nearby or their branches.

2. We remove all unnecessary from the installation site and perfectly level the surface.

If your site is ideal, then you can’t imagine better - and there is less work, and the green grass under your feet will please.

3. We choose the design and prepare the drawings.

It takes into account the following:

structure weight;
its complexity;
dimensions.

All this will affect the requirement for the foundation.

Preparatory work

We choose the material for arranging the frame of a polycarbonate gazebo.

For this you can use: wood, metal, stone.

Wooden frame (beam)

Advantages: naturalness, ecological purity, high aesthetic properties, low cost, wide distribution, availability.

Disadvantages: demanding care, fragility, dependence on weather conditions.

Metal frame (profile, corner)

Advantages: strength, reliability, long service life.

Disadvantages: high cost, high price compared to wood.

Stone frame (brick, natural stone or concrete)

Advantages: naturalness, long service life.

Disadvantages: complexity of replacement, duration of arrangement, significant weight.

Plot marking

determine the location of your future gazebo;
level the desired piece of land;
cut branches that will interfere with the installation of the gazebo in height.

Foundation pouring

If the design of the polycarbonate gazebo is light, this step can be skipped, and limited to the installation of supports.

Types of foundation for the gazebo:

tape;

columnar;

monolithic.

The choice depends on the degree of solidity of the structure under construction.

Installation of supports

calculate the required number and location of supports;
install supports and concrete, or bolt to a concrete base.

Frame installation

The manufacture of the frame is no less important element of the construction process. The lack of frame elements will lead to the fact that it will be light and will not make it possible to securely fix the polycarbonate sheets.

Prepare the frame elements, fasteners and tools.

for a wooden frame - nails or self-tapping screws are suitable;
for metal - a welding machine or bolts and nuts;
if you use a stone - then you will need a cement mortar.

Connect all parts according to the drawing.

Helpful advice.
It is more convenient to connect the frame parts on the ground, and then mount them in sections.

Wiring

It is produced if necessary and according to the technology for performing electrical work.

Construction of a polycarbonate gazebo with barbecue

Of course, this is not an obligatory stage, but after all, it is with a barbecue or that, most often, a country gazebo is presented.

We note right away that it is better not to use a portable barbecue under polycarbonate. Because the smoke from the coals will accumulate in the gazebo.

Our task is to build a gazebo in which it will be comfortable and safe.

Therefore, if you are planning a brazier, you need to equip it before installing polycarbonate. As a material for its construction, you can use:

A rock.
The most common, as it gives the gazebo a respectable look and has a long service life;

Brick.
Its disadvantage is that bricks burn out faster than stone;

Plastered concrete.
Easily stained with soot, but also easily put in order.

Metal.

It is better not to use a metal brazier in a stationary form. Because, at the point of contact with polycarbonate, the latter will melt.

Polycarbonate gazebo roof

The roof can be single-pitched, gable or complex shape - hipped. Finishing the roof with polycarbonate should not cause difficulties if done consistently:

material preparation. To complete this part of the work, you need to put the sheet on a flat surface;
apply markings on the sheet in accordance with the drawing;
cut the material according to the markup;
make holes for the screws.

Cellular polycarbonate is best mounted in parts. So you will more accurately set the fragment in place and you will need fewer assistants.

Helpful advice.
Do not use nails or self-tapping screws when installing sheets, as this may cause cracks.

It is optimal to use special screws that provide for the presence of rubber washers on both sides of the sheet (thermal washers that prevent leakage). A hole is pre-drilled for each fastener.

Glue the joints of the polycarbonate and the frame with a transparent sealant. This will ensure the tightness of the roof.

Wall decoration with polycarbonate and / or other material

This type of work is done after you have covered the roof with polycarbonate.

The principle of fastening is identical to the previous one.

Advice.
During the installation of cellular polycarbonate, you need to make sure that the stiffeners are located vertically, this will eliminate the accumulation of moisture inside the sheet.

Gazebo interior design

The decoration stage includes the installation of all elements and the design of the gazebo inside. It can be a table, chairs, benches, shelves, vases, a bar counter and other attributes. The main rule here is the high quality of the materials used. Since the summer gazebo made of polycarbonate is not heated, a temperature drop or high humidity can harm the furniture.

Exterior arrangement

This stage includes outdoor work, which include:

painting or varnishing wooden wall elements;
device ;
breaking flower beds;
installation of flashlights.

That is, everything that seems necessary to you.

Country gazebos made of polycarbonate - photos of beautiful options

Conclusion

Such a garden gazebo will be a wonderful decoration for your summer cottage and a favorite vacation spot for the whole family. And the instructions provided here will tell you how to build a polycarbonate gazebo on your own, without resorting to the services of third-party organizations.

A cozy gazebo in the country is not only a place to relax, have picnics with friends. Such a necessary country building can serve as a dining room, summer kitchen, veranda. Do-it-yourself polycarbonate gazebo will shelter you from the heat, rain, wind. Photos of the most commonly erected structures will be attached below. In addition to its direct purpose, this building gives the site a special atmosphere of privacy, comfort, aesthetic completeness, harmony.

Pavilions can be completely different configurations and sizes. For their construction, a wide variety of materials are used. However, a gazebo for a summer residence made of polycarbonate has become especially revered by summer residents, due to its aesthetic appeal and relatively low price. An additional advantage of this choice will be the speed of the construction process, the harmonious compatibility of polycarbonate with other building materials (stone, wood, metal, forging, brick).

Gazebo for giving from polycarbonate - pluses

What is the advantage of gazebos made of this material over other country options?

Light weight, the ability to install the structure in any preferred location.
Competitive cost of a gazebo, in comparison with other analogues.
Ease of installation - you do not need to involve a construction team or some sophisticated equipment for the construction and installation of a polycarbonate structure.
Possibility to combine with other building materials.

Polycarbonate is plastic, it is easy to drill, cut, it has excellent light transmission, is resistant to temperature changes, and is durable.

For example, a gazebo-canopy is made very quickly, since the design does not imply special twists, joints, joints.

Photo of a gazebo for a summer residence:

If you wish, you can dream up with the design of such a simple example, add side fragments from the remaining pieces of polycarbonate.

A more original model is a garden gazebo in the form of a semicircle. Here you have to work a little on the bends of the frame, gently bend the sheet itself.

Arbor-hemisphere, photo:

A wooden gazebo with polycarbonate fragments may look like a lightweight option. And it can be presented in the form of a detached house with transparent walls.

Photo gazebos made of polycarbonate to give:

A gazebo made of metal profiles and polycarbonate is an excellent budget, very common option. The main work is the manufacture of the frame, the project is initially made, all the necessary materials are calculated. Please note that for cutting sheet polycarbonate, you need to use a special saw with small teeth (large teeth crumble the material).

To work, you will need a standard set of tools, as well as a drill, a grinder saw, large scissors, a welding machine (in some cases), a screwdriver.

If you opted for this material, then before you build a gazebo in the country, take into account the main features of polycarbonate:

In the wind, this material manifests itself like a sail, so before installation, make sure that calm weather is planned for this day. When fastening especially large sheets in strong winds, you run the risk of not holding on and falling from a height. In general, for arranging the roof, it is better to invite a partner, he will insure you at the right time, and an extra pair of hands will not hurt in this matter.
After completing the fixing work, be sure to remove chips and construction debris from the honeycombs.
Holes (drilling) on polycarbonate are made between the ribs, while the minimum indent from the edge of the sheet should be at least 4 cm.
All ends must be sealed with materials appropriate for this case. Only the lower parts of the attached fragments remain open - this is necessary so that moisture can freely exit the cavity of the sheets.

It is also worth considering that transparent polycarbonate sheets heat up (expand) less under the rays of the scorching sun, compared to their colored counterparts.

Do-it-yourself gazebo in the country - instructions and photos of the building

Most gazebos are light in construction and weight, if you have just such a plan, then you will not need a capital foundation. The option of concreting the site for construction will be more relevant. To do this, you need to remove the top vegetation layer from the ground and make a gravel substrate, about 10 cm thick. Concrete is placed on top of the rubble, about 10 cm thick, the surface is leveled using a rule or a piece of a wooden board.

If your gazebo for a summer residence will be illuminated in the evening, then all electrical wires should be laid in the “foundation” even at the stage of filling the gravel cushion. All electrical cables are hidden in special plastic protective tubes. Also, even before laying the concrete, it is necessary to mount the base pipes at the corners of the future gazebo (preferably a square section). They should first be deepened into the ground by 50-80 cm. Pipes (suitable 5 × 5 cm) act as the main pillars of the frame. They will bear the bulk of the entire structure. When installing pipes, use the building level and tape measure - all parts must be immersed in the ground to the same depth.

At the same time, the dimensions of garden arbors for giving can be anything, however, support pipes should be located in each corner, as well as under load-bearing walls (if required by the configuration of the building). After the concrete has hardened, vertical beams should be attached to the vertical support pipes - here you may need a welding machine. Subsequently, not only polycarbonate sheets will be attached to these runs, but also benches for sitting (if this is intended by the project). The metal frame gives a wide field of activity for your imagination, if you wish, you can combine such a design with openwork wooden details, fragments of artistic forging. Stone inserts (both natural and decorative), elements of wickerwork, solid brick columns - everything that you like, harmonizes with the overall picture of the house and the site can be applicable.

Pergola with polycarbonate roof

As for the roof, the shed model is, of course, the easiest option. A more intricate design requires a complicated frame scheme, welding additional metal racks in the upper frame area. To increase the rigidity of the structure, it may be necessary to add intermediate beams. They are welded along the edges and in the middle of the roof frame - it is to them that polycarbonate sheets will be attached. In the photo attached below, there is just a gazebo for giving with a polycarbonate roof.

The roof of the gazebo, photo:

It is worth emphasizing here that all fixing manipulations must be carried out using special thermal washers. These elements have special protective covers, they are the best options for attaching cellular polycarbonate.

Thermal washers, photo:

If a voluminous gazebo is made of polycarbonate, and its roof will consist of many separate fragments, then all joints must be treated with silicone. For greater reliability, you can seal the joints with a special perforated tape. For better fixing of the sheets, special H-profiles are also used, while the profile itself is attached to the frame with screws or self-tapping screws. Fragments of polycarbonate are inserted into the grooves of the profile, if necessary, a sealant is additionally used.

As mentioned above, one more free hand not only does not interfere with you, but also optimizes the workflow. Sometimes, according to the design features, it is necessary to bend, hold and fasten large sheets, and it is very difficult for one to do this.

Gazebo for giving from polycarbonate, photo:

To make your gazebo not only practical, but also cozy, it can be decorated with relevant details. For example, the same support poles can be braided with climbing plants or reliable metal holders for flower pots can be welded to them. If the gazebo is small, then the side walls should be further strengthened - so they can become backs for benches. Keep in mind that all elements of the gazebo will constantly interact with weather manifestations, temperature changes, so all the details of the building should not be afraid of moisture. Lighting devices also need to have a high degree of moisture and dust protection (special electrical appliances with a protection index of at least IP44).

Whatever your polycarbonate gazebo is, the photos presented above are only the initial, most common design options. If the plot area allows, and your imagination suggests new non-standard ideas, this building can become a completely unique architectural creation for everyone to envy.

Arbors, photo - simple and beautiful

Many owners of their houses or summer cottages want to somehow gracefully equip their yard. And the option with a gazebo to achieve such goals is quite suitable. How to do? In the country or in the cottage, you can create from different, modern materials. The most optimal solution is polycarbonate. After all, it has such advantages:

Structures are of modest mass. And under such an arbor, it is not always necessary to fill the foundation. Both dismantling and dislocation of this gazebo are very simple.
Ease of manufacture. A similar gazebo is also available for sale in finished form.
Applicable materials available. At cost, conversation turns out to be more profitable than brick, wooden or forged ones.
This material combines well with many materials(wood, metal, etc.)
Easy to drill and cut.
Flexibility in directions along and across.
Polycarbonate completely not combustible.
He has excellent strength.
Its service life is 20 years.
He can function in humid climates.
Resistant to thermal shocks.
Excellent light transmission.
Powerful UV resistance.

There are two main types of polycarbonate:

Cellular. Guarantees excellent heat and sound insulation. Hides the interior of the gazebo. Scatters ultraviolet light.
Monolithic. Creates a visual panoramic glazing. Absorbs ultraviolet.

Thickness Criteria:

Sheets from 2 to 6 mm: small gazebos for 2-3 persons.
8 mm. They have excellent wind resistance. Suitable for gazebos for 4-5 persons.
10 mm. Tasks: barbecue area, large gazebos for 8-12 people.
16 mm. They create powerful protection against winds and cold weather.

For better light dispersion, it is better to take sheets of light colors. Dark transparent options are also suitable.

Work on the external design is as follows:

1.The façade is being cut off. Just a necessary operation for open gazebos. Wooden components are painted and varnished.

The path to the conversation is arranged.
Flower beds are placed around the perimeter.
Lighting is on.

At combinations of polycarbonate with metal a structure of powerful strength will be obtained. Corners and pipes will be needed in the work. The action plan is:

Supports are placed.
The lower strapping is carried out, the floor is laid.
The fence and roof are being prepared.
Mounted polycarbonate.

The principle of work here is similar to the previous version (polycarbonate - wood), but there are some nuances.

If you have a finished project, you need the following set:

Steel pipes. Parameter - Ø5 cm. Material - steel.
Metal corner. Parameters: 4 x 4 cm. Task: making rafters, fences and strapping.
Fasteners: brackets, self-tapping screws (type for metal).
Finishing material for the floor. Examples: wood, concrete screed.
Polycarbonate. Elements for its fastening.
Sealant.
Welding technology.
Hacksaw (metal view).
Ground drill.
Screwdriver.
Electric jigsaw.
Pliers.
A hammer.
Level.
Saw capable of cutting polycarbonate.

If you do not know how to weld metal or you do not have the necessary equipment, hire a specialist or rent an apparatus for a couple of days.

Fixing the support elements and the subfloor

Work plan:

Create markup. Zones for supports are determined.
Created in the ground holes (need a drill) with a depth of 70 - 100 cm. Diameter - up to 10 cm.
Bottom covered with sand and gravel. Layer - a maximum of 20 cm.
in the pits pipes are introduced, leveled. Before pouring concrete, the supports are steamed. This is where a wooden beam comes in handy.
Concrete is poured and hardens.
After it is completely dry, bottom trim. Corners are attached to the pipes by welding. Logs and flooring are placed on top of them.
To attach a lag in the corner holes are created. Fastening is done with bolts.
Instead of flooring you can arrange a concrete screed (as an option).
If you intend to place in a future gazebo, then the structure must be sheathed with fire-resistant material. The wooden floor is excluded. Only screed with a minimum thickness of 40 cm.

Frame work

Fences are fastened. Transverse support elements are welded to the racks.
Welded top trim. It will accommodate a roof for a gazebo made of polycarbonate.
Welding of rafters and other components. It can be arranged directly on the ground, but only on a flat surface.
The frame is lifted, securely welded to the supporting pillars.
Whole frame stained coated with anti-corrosion agents.

An example of a metal frame:

Finishing work

After working on the frame, you need to glaze the gazebo with polycarbonate. Do-it-yourself sheets of working material are pre-cut to the required dimensions. To cover the roof, you can use the same material, in extreme cases, slate or corrugated board will do.

For mounting the working material, holes are pre-created in the corner. The sheets are fastened with self-tapping screws with thermal washers. This fastener should not strongly clamp the material. For joining polycarbonate you need special plastic profiles. Butt sections are treated with any sealant.

Profile variant

Example (photo):

Here, the installation is similar to working with a metal version. Only the base consists of a profile-polycarbonate combination.

The work requires a profile pipe. Its desired cross section: square or rectangular. For a gazebo, a square profile made of aluminum or other metal is optimal. Its strength and resistance to stress is very high.

Required tool:

Welding technology.
Hacksaw (metal view).
Bulgarian.
Electric drill.

Building a foundation

Taking into account the lightness of the profile and polycarbonate the foundation of powerful strength for garden arbors is not needed. It is optimal here to arrange a strip foundation with a shallow depth.

Work plan:

A trench is created along the perimeter of the proposed gazebo. The maximum depth is 30 cm.
Its bottom is covered with rubble.
A reinforced belt is created from the rods.
Formwork is created.
Concrete is to be poured. Metal elements must be laid in concrete. They will then be joined by a profile.

If a large gazebo is built, then the trench is made up to a depth of 70 cm.

Work on the base is carried out in strict accordance with the drawings. Details are cut into the desired segments. Roof supports are being prepared. It is best to concrete them. It can also be attached to embedded elements, but this option is less durable.

Roof fixing example:

You can connect the entire frame elements with bolts, but this option has low strength. Therefore, it is better to weld all the components together.

Polycarbonate can also be used for the roof. The main thing is to mount it correctly.

As a rule, aluminum profile gazebos are less reliable. In addition, this material is not cost effective.

Combination metal - polycarbonate

Option with .

Sidewalk version.

Polycarbonate Roof Option

Modest size gazebo.

Mobile option.

Rectangular variant.

When creating a polycarbonate gazebo with any combination and any kind, the financial issue remains extremely important. Below are some examples of prices.

Polycarbonate (per sheet):

View	Colour	Width	Length (m)	Thickness	Weight (kg)	Price, rub)
Monolith	Bronze	2,05	3,05	3	0,8	7065,50
Monolith	Transparent	2,05	3,05	6	1,3	9400
Monolith	Bronze	2,05	3,05	6	1,3	14131
Cellular	Transparent	2,1	6	3,2	0,48	2,250
Monolith	Red	2,05	3,05	8	9,6	20200
Cellular	Blue	2,1	6	16	2,1	9650

Depending on the manufacturer, regions, quality and parameters, prices vary.

Finished gazebo. Examples

View	Combination	Width	Length (m)	Height	Roof	Price, rub)
Closed. Multifaceted base	Metal	3	4	2,5	Polycarb.	17000
Open. Wooden base.	Wood	1,6	2	2,1	Polycarb	11990
Open. Metal. main	Metal. profile.	1,92	1,66	2	Polycarb.	1500

There is also a huge price range here. Both the parameters of the design itself and the working material for a beautiful gazebo are important.

Video instruction

One of the best videos on the topic. The process of assembling a gazebo from a metal profile with a polycarbonate roof is in all details. Minus the material - you have to prepare for a long viewing.

Small architectural forms on a suburban area help to hide from the heat and rain, organize a corner of relaxation in the bosom of nature. Arbors made of polycarbonate look openwork and weightless, but the design is reliable and solid. The material is translucent, it can be used to make a coating of various shapes and colors.

Types of gazebos made of polycarbonate

For the construction of a garden architectural structure, a metal or wooden frame is used and synthetic sheets are used to cover the top and wall cladding. Options for polycarbonate gazebos differ in several factors:

by type: open and closed;
in the form:

rectangular;
round;
square;
oval;
polygonal;

by installation method: stationary and portable;

by design: they can be a light canopy or a complex structure;

by functionality: with or without barbecue.

A common approach to the manufacture of structures is the construction of an iron frame from a profile, followed by wall and roof sheathing. Metal gazebos for giving with polycarbonate are strong, not afraid of temperature changes and last a long time. The iron profile is coated with an anti-corrosion compound and then powder coated. The color of the frame is chosen so that the whole structure is in harmony with the overall appearance of the garden. The coating is used for decoration of roofs and wall cladding.

The material is simply cut with a knife, bends well. It has a honeycomb structure, thanks to which the rays of the sun are refracted and turned into soft, special lighting. A forged frame looks more advantageous, the openwork walls of which, in combination with a light translucent roof, look light and airy. Portable structures of an open type are convenient, they are easy to transport from one place in the garden to another. The seats in the design are wooden. If it is necessary to create a stationary room, a foundation is poured into which the frame is attached.

Wood is relevant in the construction of load-bearing frames for such a structure. It turns out a cozy and warm gazebo, natural wood and polycarbonate, matched to the color, together look harmonious. The advantages of using wood for the base are environmental friendliness, beauty, many design options, in winter the material does not cool down, and in summer it does not overheat. Previously, the tree is treated with an antiseptic to protect it from decay. Due to the high fire hazard of wood, it is not recommended to install a brazier in such a design.

When constructing the roof and walls of a gazebo made of polycarbonate, you need to take into account its small disadvantages. The material is gradually destroyed under the influence of sunlight. It is better to place such a structure in the shade of trees, use a product with a protective coating. The second drawback is low abrasive resistance, the coating is easily scratched, it is recommended to be careful when working with it.

Polycarbonate gazebo design

To create harmony in the garden, you need to decide on the appearance of the structure and the place of its installation. made of polycarbonate will protect from wind and rain, open - will allow you to enjoy the beauties of the garden. You can install them on the lawn in front of the building or make an extension to the house. The design of polycarbonate gazebos is different - there are models in the form of a barrel, a polygonal tent, or a decorative children's carriage. In terms of size, the structures are in the form of a canopy for one bench or an overall structure for a large company. It all depends on the needs of the family and the wishes of the owners.

A small architectural structure should become a decoration of the garden. Country gazebos made of polycarbonate with a domed roof are a complex and attractive design. It is made in the form of a hemisphere. The height of the roof depends on the diameter of the dome, it must be calculated so that snow does not collect on it. To assemble the structure, bent rafters are used to create arches.

The arched structure is made as an open canopy with a semicircle at the top or in the form of a large dome with closed walls, similar in appearance to a space observatory. From a spherical roof, due to the flexibility of the material, it is possible to make a barrel model, in the form of a cylinder, the bases of which remain open for passage. The arches in it form both the walls and the roof at the same time.

Small architectural forms on the site come in different configurations. A round gazebo for a summer residence made of polycarbonate is convenient for installation inside the garden. It can have a domed roof of arches or a hip roof with slopes in the form of ribbed triangles converging at the top at one point. The walls of the closed model are made in the form of a cylinder or a polygon; the structure can be supplemented with openings. Windows in the polycarbonate gazebo are installed along with the profile, which sets the shape of the frame. Additional lighting will fill the room with comfort. Curly holes look more impressive.

The designs of the traditional form are the most functional. A rectangular garden gazebo made of polycarbonate allows you to place several zones in it - a resting place, decorated with benches and a table, and a barbecue area. You can install it in any part of the garden or attach it to the house. or a barbecue stove with a polycarbonate coating must have a foundation, a chimney, in order to comply with all fire safety measures. The structure is covered with a domed, gable or hip four-pitched roof.

Modern developers offer convenient and comfortable systems for equipping walkways in small garden structures. Beautiful polycarbonate gazebos are equipped with sliding doors that allow you to hermetically close the room and make the most of its area. They are installed in the direction of one or more walls of the structure, allow you to partially open the room.

Doors are mounted on a special guide, located along a plane or in a circle, they move along this rail. This is a "coupe" variant of one or more doors. The shape of the canopies are straight, semicircular, oval or non-standard. The flexibility of the material allows you to create different doors depending on the contours of the building. They are lightweight, a wide range of colors, durable, safe and comfortable.

Arbors made of polycarbonate decorate the landscape and serve as a great place to relax. They are lightweight, transparent, not afraid of frost and heat, easy to assemble. The choice of models is huge - closed, open options, with a roof of various shapes and shades. You can make a freestanding structure or an elegant extension to the house, create an indoor summer kitchen, a place for a barbecue, cover a greenhouse or a swimming pool. An elegant garden design will be an excellent decoration of the local area, a useful architectural addition and a favorite place for a picnic in the fresh air.

A gazebo installed in the yard will give a feeling of comfort. A light architectural structure is an alternative to a pool, a garden or a shed with a barbecue. Nothing prevents you from making a gazebo with your own hands not from ordinary wood, but from translucent shiny polycarbonate, armed with special step-by-step instructions for making.

Advantages and disadvantages of a yard gazebo made of polycarbonate

The polymeric material of the honeycomb structure can compete with wood, acrylic glass or any other building material. The fact is that a structure built from polycarbonate sheets has a number of obvious advantages:

looks “airy”, since the polymer material is not a heavy raw material, and is often built without pouring a concrete platform;
can be dismantled or moved due to its lightness;
erected according to a simple scheme, which is understandable even to those who do not consider themselves a master in construction;
built using materials that can be easily found on sale;
it is relatively inexpensive, less than a construction made of bricks, wood and wrought iron;
can be created in combination with other material, which will only add originality to the structure.

Simple structure with vaulted roof

It is worth considering separately the polycarbonate itself, as a material for the construction of a gazebo. It is characterized by excellent flexibility, can be processed with cutting devices and a drill, is characterized by strength and resistance to high temperatures. Polycarbonate is able to withstand any environmental impact, and therefore can serve without complaints for about 20 years.

This material does not deteriorate due to humidity and sudden changes in temperature. Daylight passes freely through it, which makes the gazebo made from this building material sunny and homely. Another advantage of polycarbonate is its resistance to ultraviolet rays.

All these advantages of the material dispel all doubts as to whether it is possible to build a gazebo from polycarbonate. However, a structure made of this material also has significant disadvantages:

it requires special care, as it is necessarily equipped with a frame made of metal profiles that needs to be coated with an anti-corrosion compound and painted;
sooner or later its walls will be scratched;
may turn black from the inside in case of poor-quality processing of seams between polycarbonate sheets;
it is considered a structure where it will be stuffy, since air does not pass through the walls of the polymeric material of the cellular structure.

Works preceding the construction of the summer facility

Without drawings, the workflow can get out of control, because they are the sources of information about the type of structure, its size and purpose. One way or another, the diagram will show what the gazebo will look like.

Drawings, diagrams with dimensions

In order not to get confused in the drawings and in further construction work, a beginner in this business can be advised to build a simple open-type gazebo, the design of which resembles a square or rectangle in shape. Having depicted such a structure on paper, it is necessary to indicate its dimensions.

The parameters of the gazebo depend on the number of people who will occupy it at the same time. For the owners of the gazebo and 8 guests, there will be enough space in the structure if its diameter is 2.9 m. And when it is planned that 12 people will sit in the building for summer holidays, it is necessary to create a rectangular structure with dimensions of 2.5x3.5 m.

Below is a drawing of a gazebo, which is simple and can accommodate at least 8 people. It is made in the shape of a rectangle, equipped with a standard canopy and can be moved if necessary. The backbone of this design is made of metal elements welded together.

The structure has a vaulted roof and 2 benches.

A gazebo designed for 8 people to rest must have a certain size. Its base is created with parameters of 1.6x2 m. The correct height of such a structure is 2.1 m. It is important to install the walls of the gazebo in question at an angle of 75 0. And the rounding of the pipe for the roof of a small simple structure should be 3 m.

When determining how much building materials will be required, it is important to consider the form in which polycarbonate is sold. Cellular material can be purchased in the form of sheets with parameters of 2.1x6 m or 2.1x12 m. And monolithic polycarbonate, which is more expensive, is usually sold in sheets with dimensions of 2.05x3.05 m.

The subtleties of the choice of materials: what is the most optimal color and thickness for coating

The purchase of polycarbonate for the construction of a gazebo must be approached wisely. The fact is that a structure made of material acquired at random will not last long. When considering polycarbonate in a hardware store, you should first of all pay attention to its expiration date.

It is important to do this, since the polymer material of the cellular structure is produced in 2 versions: from primary or secondary raw materials. You can understand that this is grade 2 polycarbonate, the creation of which took plastic containers and other products, at least by the fact that the material cracks when bent. This will also be indicated by the cloudy and uneven color of the polycarbonate.

To make sure that second-rate material is on sale, check its weight. 1 m 2 of polycarbonate 4 mm thick, to the quality of which there will be no complaints during operation, weighs 0.8 kg. A 6mm piece of honeycomb material is 500g heavier and an 8mm piece is 700g heavier.

This material can differ not only in color, but also in thickness.

Requirements are also imposed on the thickness of the polycarbonate necessary for the construction of the gazebo. Thin, which means fragile material is not necessary to purchase. In order for the structure to be durable, it should be built from polycarbonate sheets with a thickness of at least 6 mm. Many builders, in order to get a gazebo that will last a long time, prefer eight-millimeter cellular material.

When choosing polycarbonate, its color design is of particular importance. It is desirable to purchase raw materials transparent, almost like glass. It will not become hot under the influence of sunlight and will not make the interior of the gazebo unnatural. Rest in such a building will bring a lot of positive emotions!

The frame of the polycarbonate gazebo is supposed to be made of wood or metal profiles. Bars are considered an environmentally friendly and aesthetic material, but if they are not treated with a special compound, they can rot or become covered with fungus. Profiles and corners made of metal do not need specific care and are characterized by durability, therefore they serve as the backbone for the arbor for much longer. True, they must be able to connect using a welding machine.

So, in order to build a gazebo shown in the above drawing, you need to prepare:

polycarbonate sheet;
50 m of steel profile pipes with dimensions of 25x25x2 mm;
3 metal profiles bent by a pipe bender, which will make an arch out of them;
20 panels of planed sanded wood with parameters 2, 5x12, 5x25 cm.

Required Tools

To make a mobile gazebo from polycarbonate and other materials, you will need tools. Among them should be:

power tool for abrasive processing;
screwdriver;
an electric tool that drills holes;
apparatus for welding;
saw, which is useful in the process of working with wood;
a hammer;
hacksaw for metal;
carpentry manual cutting tools;
shovel.

During the fastening and processing of materials, the master will not do without the following devices:

drills and nails;
self-tapping screws, screws and nuts;
screwdrivers and brushes;
sandpaper;
glue for joining wood parts;
paints and varnish;
liquid concrete.

Step-by-step instructions for making a summerhouse with your own hands

The first issue that needs to be resolved when starting the construction of a recreation facility in the courtyard of the house concerns the pouring of the foundation. The fact is that in some cases it is possible to make a gazebo without a concrete platform. We are talking about the construction of a portable structure with a metal frame. Still, the polycarbonate from which such a structure will be built is lightweight and therefore does not need to create a place for installation. But, wanting to put a stationary gazebo in the yard, you will definitely have to pour a concrete base.

simple foundation

Bearing pipes of a stationary structure intended for outdoor recreation must be fixed in soil and concrete. To do this, you need to do the following:

Choose a platform in the yard where the gazebo will stand. In this case, one should take into account how close to the surface of the earth the groundwater flows. The earth, which will become the basis for the construction of the structure, needs to be leveled by uprooting stumps from it and removing stones from its surface;
Make a markup, determining where the supporting pillars will be loaded, and dig holes 40 cm deep in these places;
Pour sand into the prepared ditches, compact it, and then cover it with large gravel;
Place the profile pipes that serve as supports in the dug recesses, cover them with fragments of bricks or rubble so that they do not roll to the side;
Pour the metal supports with purchased liquid concrete and give it time to harden, that is, about 7 days. While the cement mortar dries, it must be moistened with water.

Carrier pipe filled with concrete

Having installed the supporting pipes in the ground, they begin to manufacture the backbone of the structure, walls, roof and all other elements.

Construction of a gazebo

The skeleton of the structure can be assembled separately, and then welded to the supporting pipes. But some builders act differently: each part of the gazebo is attached to the supports by means of a welding machine in turn, for which there is no need to hire a team of workers.

Cut the purchased pipes, giving them the dimensions indicated in the drawing;
Use the bolts to connect the supports of the skeleton of the gazebo to each other;
Make a base, then weld other metal elements to it, heading up the canopy;
Make an arch of the structure, that is, weld 3 equally curved pipes to it. If the bending radius of these metal elements is different, then the polycarbonate sheets will not fit perfectly tightly to the backbone;
Coat the metal parts with a primer, and then paint.

Durable metal frame construction

How to make a roof

Now we need to start making the roof, which involves performing certain actions:

Cutting a sheet of carbonate, for which it is necessary to apply the parameters indicated in the drawing to the material, draw lines and cut along them, armed with a power tool for abrasive processing. This work must be done in slow motion with the utmost care to avoid the formation of cracks in the polycarbonate, which will spoil the final result of the construction of the gazebo;
Fix the 2 sheets of material obtained on the arch using self-tapping screws with rubber gaskets. The need for such fasteners arises for the reason that it is very important to protect the plastic from contact with the metal. In addition, by means of such self-tapping screws it is possible to achieve a strong connection between the frame and the roof. In this matter, too, one should not rush, as haste will be fraught with damage to the cellular structure of the material.

The top of the structure is already covered with transparent polycarbonate

Final processing of the finished structure. How and what to sheathe, decorate

The construction of a facility for outdoor recreation ends with the arrangement of a table and 2 benches. They are supposed to be sheathed with wood material. It is necessary to prepare for this work: mark the bars on the bars, guided by the drawings, and cut the parts into the required number of parts.

Finished boards need to be sanded by rubbing with sandpaper. It is impossible to ignore the manufacturing stage, otherwise chips will stick out in the wood, and it will be rough to the touch. After processing the boards with sandpaper, you can cover them with a thin layer of varnish. This will make the wood material smooth and shiny. It can be fixed to the metal frame with a drill and bolts as soon as the varnish dries.

The recreation facility will acquire an original look if you decorate it around the perimeter with fresh flowers. To create a cozy atmosphere on the gazebo, it does not hurt to hang small lanterns. Next to the entrance to the structure, you can put figures made of plaster to make it look elegant. If it is assumed that breakfasts or picnics will be organized in the gazebo, then a tablecloth should be laid on its table, the color of which does not differ from the tone of the polycarbonate on the roof.

Simple wooden frame construction Construction sheathed with polycarbate even on the sides Forged elements serve as decoration Small cozy design Leisure facility with long benches

The gazebo, assembled from metal profiles and polycarbonate sheets, will be a great place to spend time with family or friends. Such a structure combines 2 qualities: aesthetics and cheapness.

Categories

Popular