Making a flower pot from a plastic bottle. How to make flower pots from plastic bottles with your own hands? bottle pots

Gardeners and houseplant lovers should definitely know how to make DIY flower pots. Tubs and pots will transform the interior and give a "zest" to each plant. In addition, homemade pots will help save money and get rid of unnecessary items and materials.

Decorative pots provide great opportunities for creativity. They can be painted, decorated with decoupage, ribbons, fabric, accessories, made from different materials and given the most unusual shape.

We do it ourselves

It is easy to think of what pots can be made of.

For flower pots, any material is suitable, including waste material, which does not allow moisture to pass through and keeps its shape well.

Undoubtedly, the most beautiful and comfortable pots are ceramic ones. If it is possible to make a pot on a potter's wheel, then feel free to use it. Clay is the best material for planting domestic and ornamental plants. It retains moisture and allows air to pass through, does not overheat and keeps its shape well.

If it is not possible to make a pot yourself, then you can purchase a ready-made one and figure out how and how to decorate it. There are many ideas for decorating pots. It is not necessary to paint the pot with paints, you can dream up and come up with the most unusual “outfits” for it.

Thrifty gardeners can save on a ceramic pot and make it from improvised materials. The simplest pots and tubs are made from plastic bottles. It is enough just to cut off the upper part, fill in the earth and start planting the plant. However, you can dream up a little and make elegant flower vases from such an unsympathetic material as plastic.

For the manufacture of two variants of pots you will need the following materials and tools:

a bottle of 1.5-2 liters;
CD-ROM;
glue gun;
stationery knife;
marker;
hole puncher;
spray paint.

Working process:

Draw a wavy line in a circle approximately in the middle of the bottle (it can be straight) and carefully cut the bottle into two parts along it (two blanks for pots turned out);

Glue the part with the neck to the middle of the disk (before that, tighten the lid tightly);

When the glue sets, turn the workpiece over and drip a little glue around the edges for stability;

Make holes along the wavy edges with a hole punch;

Paint the resulting pots from a spray can and wait until it dries completely.

Pots are ready! You can plant plants.

To make the edges of the cut bottle even and smooth, they can be trimmed with a soldering iron. You can also give the edges an original shape with a soldering iron.

Hanging pots are also easy to make from bottles. The simplest model is suspended from two sides - by the bottom and the neck. One side of the bottle must be cut lengthwise, and two through holes should be made on the sides with an awl or soldering iron so that the bottle pot can be hung.

In such pots, you can plant plants directly, or you can use them as a planter. If desired, paint the outside of the bottles with acrylic paint.

More interesting models are cats. To make them you will need:

bottles with embossed bottom;
marker;
spray paint;
stationery knife;
soldering iron or awl;
ropes or pieces of strong fishing line (4 pcs.);
sample.

Cut off the bottom of the bottle;

Draw ears by hand or according to a template and cut them out;

Paint the blank from a spray can and wait until it dries completely;

Make a muzzle with a marker: draw eyes, ears, mustache, nose;

To hang the pot, you need to make holes on four sides and thread ropes or fishing lines through them.

Ready! You can plant a plant.

Instead of cats, you can make other animals, for example, a bunny or a bear.

Original pots are easily made using tin cans and clothespins. To do this, you must perform the following steps:

Peel off the label and wash the can, dry;

Attach ordinary wooden clothespins tightly to each other to the wall of the can.

It turned out a small pot, reminiscent of a traditional tub. If desired, you can paint the clothespins with acrylic paints, and so that they retain their original appearance longer, cover them with varnish.

Eco-friendly pots and flowerpots can be made from wood. They will decorate both the apartment and the country house. Wood is a cheap material that lends itself well to processing. However, it is worth remembering that when making a wooden pot, the hygroscopicity of wood should be taken into account. In order for the tub to not start to rot or deteriorate from moisture, it must be treated in a special way - impregnated with moisture-proof agents, covered with stain, varnish or other means.

The easiest way is to assemble a pot from ready-made wooden beams, fixing them with glue or cloves.

Unusual outdoor wooden tubs and flowerpots for a summer cottage can be made directly from a piece of log. For this you need:

a log or stump of a sufficiently large diameter;
drill with a drill length of up to 25 cm and a diameter of 20 mm;
chisel;
file and sandpaper for leveling the walls of the pot;
impregnation for wood from moisture and decay;
polyethylene.

What to do:

Saw the selected log, making it the desired height (usually soil flowerpots are made from 40 cm);

Using a drill, destroy the core of the log: make several holes in a circle at an equal distance from the walls, and then make holes in the middle;

Using a chisel, remove the middle of the log and align the walls;

Impregnate the wood from the inside with moisture-proofing agents, lay polyethylene and start planting plants.

Also, a log-pot can be used as a planter: put a plastic or ceramic pot with a plant in it.

A few ideas of what else can be adapted for a flower pot can be seen in the photo:

Video on the topic of the article

Below is a thematic selection of videos with master classes.

For people with imagination and skillful hands, it will not be difficult to turn unnecessary things into real masterpieces. Masters and beginners use crafts from plastic bottles for the interior, as garden decor and in the form of practical furniture. Colored plastic bottle caps are an excellent material for mosaic panels on walls and fences. The best ideas with detailed instructions and photos are easy to implement in the country, turning a bare area into a "glade of fairy tales", and filling the house with useful little things.

Important advantages of crafts from plastic containers

A well-made souvenir or trinket will eventually develop into a hobby if there are no limits to fantasy. Do not cease to amaze summer residents who have moved from simple hedges on a wire to buildings that delight in scope.

From the available material, which many people throw away, someone constructs:

greenhouse;
carport;
summer shower or bath;
country toilet or shed;
summer gazebo or sun visor;
a teremok for children or a playground;
sandbox with decorative borders;
various temporary structures on the site.

The main advantage of such structures is the available material. With reliable fastening of the elements, the walls of the building are aesthetic and quite reliable. It all depends on how the plastic bottles are connected. If you approach the matter thoroughly, the desired result will impress even experienced builders.

Plastic eventually becomes a real environmental disaster - it is difficult to recycle. But it is enough to involve all those who are not indifferent to the cleaning of the territory, and there will be a whole mountain of empty PET bottles for the construction of a greenhouse, a cascading flower bed or vertical gardening. The only drawback is the long collection of the same container, since the containers are produced in different colors and volumes.

Some manage to collect enough ornamental material in 1 season, others attract neighbors and friends to collect plastic. Someone decides to clear the area for picnics in order to improve the environment on the way to the dacha and collect material. As a result, both plastic bottles are in use and the territory is clean.

Another advantage is that plastic containers are soft and pliable, easy to cut, and no complex tools are required. With little skill, the material itself "dictates" ideas.

To create an original decoration you need:

interesting idea;
ready-made role model (illustration);
craft material with tools;
step by step guide to the training plan.

In the hands of a real master, plastic bottles take on a second life, becoming functional objects. Souvenirs are best done on a seasonal basis. For example, New Year's toys are made in winter, practical country houses - in summer, and in spring and autumn it remains to build a "glade of fairy tales" near the house for children.

Recycling plastic containers is an exciting activity for the family. It is easy to attract children to him by entrusting a simple part of the work. Don't forget to remind them that you don't just make a firebird or "Chunga-Changa Island" with palm trees from bottles, but take care of the environment. A yard or a school class can be involved in ennobling the territory.

Furniture and interior items from plastic bottles

Furniture made from plastic bottles looks like a masterpiece that not everyone can afford. They will need a lot of plastic containers of the same sample. Sofas and pouffes impress with their design and comfort, not inferior to real furniture. There is nothing complicated if the sofa is made in blocks - seat, back, sidewalls. If there are not enough containers, sofa blocks can be made alternately. It is better when they collect bottles from one drink, for example, two-liter kvass or lemonade.

The principle of "assembling" furniture from bottles is simple - they are exposed in layers and tightly wrapped with tape. To make the furniture softer and springier, a little air is released from each bottle and twisted tightly. In the place where the cap is, cut out the cap from another bottle and wrap it with tape. It turns out a block, which has a bottom on both sides - this is the basis of the furniture.

Then it all depends on the imagination, the type of furniture and the number of bottles available. We wrapped 7 containers of the same volume with tape, we get the basis for an ottoman. What will be its appearance and style depends on the master. For a soft seat, you will need a round pillow or a block of foam rubber according to the size of the top. The cover is cut out according to the size of the ottoman in the form of a cylinder, and it is convenient to insert a zipper along the side seams, but it is easier to sew up the upholstery tightly.

If there is not enough furniture for the summer, an ottoman for a summer residence is made from an old wadded blanket and a baby pillow, wrapping a block of bottles around them. Old curtains or a bedspread will go to the sheathing. If the pouffe should have a presentable look, fabric or eco-leather is chosen to be newer and more expensive.

To build a coffee table, you will need 4 racks of plastic bottles and a plywood shield as a tabletop, which can be hidden with a long tablecloth. In a similar way, they make a convenient stand for a laptop or a remote table for giving. For large furniture (sofa, chaise lounge or chair) from plastic bottles, you will need a lot of patience and source material.

Useful little things for the house from plastic bottles

Flowers and vases

It will not be difficult to decorate a schoolchild's bedroom or a children's room with crafts from plastic containers. You can build a whole bunch of artificial flowers. Put the resulting chrysanthemums, daisies or roses in a vase of the same material, adding the middle with diode bulbs on an insulated wire. This is how a night lamp of extraordinary beauty will look like, where a weak light shimmers in plastic petals.

Advice: To give the leaves a special shape, use the heating of the blanks and folding the corners with tongs!

To place a homemade bouquet, you will need a suitable vessel, just cutting off part of the bottle is not aesthetically pleasing. The edges of the cut are marked with a ruler to make a cut, fixing the result by heating the bends. A small transparent bottle is cut off to the very top, about a half is cut off from a large container. We choose a material with a corrugation or a “waist” in the middle so that there is an interesting base.

Then we do as fantasy allows, but we bend the edges beautifully. The fringed cut is obtained from vertical or diagonal notches of the plastic base. The resulting strips are evenly bent to the outside.

Note! It is important that all the notches and the depth of the slot are exactly the same, then the whole product will come out neat.

Depending on which edge is desired, the strips of the vase (the edges of any other product) are fixed in different ways:

curly bend;
stapler staples;
fusing;
bonding with transparent polymers.

Planters, flower pots and containers for seedlings

Colored plastic containers in the form of bottles and bottles of various sizes are suitable as containers for growing live plants. It is very easy to make a fragrant balcony from 3-liter tanks - a cascade of ampelous petunias. Fragrant flowers hanging from cut containers will help make the dream of a beautiful piece of paradise come true.

Large bottles and tanks cut in half are hung upside down and with a lid. At the bottom it is recommended to lay large pebbles for drainage. Excess water after watering will go to the plants in the lower rows. In the same containers, plants are grown without soil - in a hydroponic way with the addition of fertilizers. Fresh herbs and seedlings (in urban and country conditions) are also germinated in prepared plastic bottles.

Advice: Use the compact shape and the ability to hang containers for vertical gardening with automatic watering. In the absence of the owners, watering cans with water immersed in the ground will cope with moistening the plants.

Traps and feeders

Using plastic bottles, you can scare away pests or attract birds to the site. To do this, the tank is used as a feeder, and traps from bottles of chemicals are placed at the roots of fruit trees. From a double plastic container, craftsmen build traps for wasps, where they fly into sweet water and cannot get back.

Equipment of the suburban area

At the dacha "in haste" it is easy to build crafts from plastic bottles in the form of an impromptu washbasin by hanging a full bottle upside down. It is worth unscrewing the lid a little, and a small stream of water will help to wash and wash your hands. It is also worth making a bench and organizing lighting with beautiful owls or gnomes of their plastic. Any garden decor for inspiration - on interesting illustrations.

Multifunctional items for the home

Make an original cosmetic bag from 2 bottoms of plastic bottles, sewing the edges with a zipper. This box can be used as a multifunctional item - a piggy bank, a case for large beads, hairpins or jewelry.

From a similar ball, suspended somewhere nearby, it is convenient to knit, pulling the thread from the ball inserted inside. Nail polish or a lipstick collection is easier to find in a makeshift zipper box.

New Year's decor

Bright Christmas balls, garlands or plastic bottle toys are a worthy use for transparent containers. From one bottle, cut into round strips, a transparent ball will come out. After fixing the sphere with a stapler, decorate in any way:

winding "rain";
pasting with crushed foam (snow);
decoration with sequins, beads and stones.

New Year's decor of white plastic bottles "with a waist" is suitable for snowmen or penguins. You can use black nail polish to draw eyes and other elements, cotton wool (snowball), sparkles, small buttons, beads and everything at hand. Funny caps for characters - from colored socks without a pair, knitwear strips are used as a scarf.

Advice: From homemade winter characters, a candle, ready-made tinsel and a couple of pine branches with cones, create an original New Year's composition so as not to buy a Christmas tree.

Curtains made of colored plastic caps and bottles

Space zoning is a popular design technique, where a do-it-yourself translucent curtain is often used. The original curtain is able to decorate any living space, cottage or covered terrace. In the interior, original hanging partitions made of unusual materials are widely used.

In modern decor, plastic is in demand, including bottles and caps for them. For curtains there are options:

from scraps of the bottom of small containers - stripes on a thick fishing line, swaying with air movement;
from colored covers - a fantasy panel of tightly strung elements;
a garland of plastic and lights to give the curtain on the diodes more aesthetics.

Original all-season flower beds

The summer season is over, and home-made plastic flowers are replacing the living flower beds, which are not inferior in beauty to real ones. Their advantage is the ability to decorate the territory at any time. These flower gardens pale against the backdrop of living plants, but in early spring and late autumn they are the only ones that attract admiring glances.

For daisies, you will need small plastic containers of white (petals), yellow (middle) and green (leaves). You will also need an awl and a candle (for heating), “liquid nails”, scissors and hard wire in green insulation.

We cut the base of the white bottle to the center, marking 16 segments - these are the petals. We bend the neat edges over the candle flame, we also make 2-3 chamomile corollas, which we connect in the center with an awl. Here the stem with leaves is fixed on the green wire, closing with the middle. We fill the center of the flower with a yellow basket with small cuts from 2 finely dissected circles with a fringe bent over the candle. We supplement the flower with green sepals from the bottom, collect all the parts and fix them together.

From the remaining pieces of green plastic, cut out leaves with a hole at the base (for stringing) and give the desired shape by heating over a candle flame. We fasten leaves on a wire handle, they should slightly bend around it. It remains for chamomile to make a few "companions" and find a decent place for the bouquet.

Using patterns and imagination, it is easy to build plastic lilies of the valley, roses, chrysanthemums or tulips. To do this, you need a plastic of a suitable color, from which several layers of petals are made to achieve a resemblance to real flowers.

All-season flower beds include mosaic compositions from containers filled with earth. Wall panels are made from covers. "Butterfly" or "ladybug" - in different versions.

Crafts from plastic bottles for the playground

The incredible beauty of a bird with plastic plumage is a whole “field of fairy tales”. This is a peacock or firebird, swans, doves, bullfinches and parrots. All of them are made from empty PET bottles according to the general principle:

Design an aesthetic bird head with eyes and a beak;
Build the torso and neck;
String plastic plumage;
Provide wings and tail;
Plant on paws or fix on the selected surface.

Plastic swans can be fenced off with a blue "lake" of inverted plastic bottles. Outlandish birds will decorate the trees in the corner of the garden, which is reserved for children's games. You can choose a themed decor, such as a desert island with palm trees and parrots.

Plastic animals, birds and insects, familiar to our latitudes, as well as favorite fairy-tale characters, are complemented with other materials. Tires, wood and empty containers that are easy to paint will be used.

How to make decorations from plastic bottles for summer cottages and gardens

Original garden decor from improvised material is another way to give the site a personality while the young plants come into force. From green plastic bottles, it is easy to make funny frogs on the edge of the pond, watching dragonflies and butterflies from the same material.

Palm trees - a popular garden decor, consists of trunks (up to 15 brown bottles) and palm leaves (green plastic 5-10 pcs.). This is a simple process that even children willingly participate in.

Prepared brown cups with notches are strung on a thick steel rod (bamboo rod), having previously pierced the base. It is better to use brown containers (1.5-2 l) as a whole, cut in half, then you will only have to punch through the bottom.

We leave green bottles without a bottom and a neck, with the exception of the last one with a neck, which will be needed as a loop. We cut these containers lengthwise into 3 parts to the loop and cut them like leaves. If longer leaves are required, we attach the second half of the sheet with a stapler. All parts of the stem are strung on the base and attached to the top, connecting with a common loop. It remains to be securely installed on the site of "exotic guests" with a lush crown.

The material is collected for a whole year, but it is easier to involve neighbors and acquaintances in the idea of \u200b\u200b"ecological" cleaning. In the yards there are special containers for plastic - it is much easier to collect.

Preparation for work - removal of labels and glue residues from plastic bottles, it is important to rinse well and discard the deformed material.

If vertical fences are being built, they need to be filled. Depending on the idea, sand, stone chips or dry soil are poured into PET bottles, burying 1/3 with the neck down.

For selected purposes, plastics of different elasticity are used. Heat treatment is required for filigree work (flowers). It is important not to overheat the fragments cut into strips.

Fairy tale characters sometimes require additional painting. For example, pink piglets for a playground are best covered with an aerosol spray, fixed with transparent acrylic paint.

Plastic bottles are an excellent material in capable hands. Using them as a basis, it is easy to teach children a lesson in environmental education and fill the house or yard with practical things. With a creative approach, the color, volume and shape of plastic bottles themselves will prompt new ideas for an exciting creative process.

69 photos of plastic bottle craft ideas

Floriculture has gained wide popularity. The owners of private houses are trying to equip a beautiful area in the garden that creates a great mood. Owners of apartments arrange entire mini-greenhouses. But no plant lover can do without a flower pot. Such a part can be easily purchased at the store. However, it is more interesting to make flower pots with your own hands. After all, such an item will not only emphasize your individuality, but will also become a real work of art.

Cloth decoration

If you are tired of boring old flowerpots, do not rush to throw them away. You can decorate beautifully. This is a very simple method that allows you to turn an ordinary container into an original piece of furniture.

For decoration you will need:

beautiful fabric;
old pot;
glue (possible PVA);
scissors;
centimeter;
hard brush.

And now let's look at step by step how to create such flower pots with your own hands:

Measure the pot with a centimeter. From a piece of fabric, cut the appropriate blank. At the same time, add 10 cm to the hem of the fabric (top and bottom).
Apply a thick layer of glue to the surface of the pot.
Cover the container with cloth. Smooth out wrinkles very carefully.
At the bottom, make cuts to the surface of the pot. Glue each piece to the base.
Do the same with the rest of the top fabric. Glue them to the inner surfaces of the pot.
Cover the flowerpot with acrylic varnish or a layer of glue. Be sure to let dry.

pot painting

To perfectly decorate flower pots with your own hands, you need to dream a little. Original flowerpots can be created using paints. A multi-colored palette can harmoniously decorate a winter garden or interior room.

You don't have to be an artist to create a unique masterpiece. For people who can't draw, you can use the following recommendations:

If you use masking tape, you can create striped patterns.
Pot "strawberry" is easy to make. Paint the surface of the flowerpot with red paint. Make the top ring of the pot green. Apply specks on the red surface. Try to distribute them evenly.
To apply a drawing or pattern to a pot, use ready-made pictures. Copy the selected motif to the surface and only then proceed to staining.
You can use ready-made stencils.

Decorating with cereals

This is another easy method to create beautiful DIY flower pots.

To create such a decor you will need:

plastic or ceramic pot;
piece of paper;
pencil;
carbon paper;
PVA glue;
tassel;
dry peas;
buckwheat;
small beans;
lentils;
poppy seeds;
rice groats;
flax seed.

It will help you understand how to create such flower pots with your own hands, a master class:

On a piece of paper, draw a sketch that you want to transfer to the flowerpot. Multi-layered drawings look harmonious.
Using carbon paper, transfer the sketch to the surface of the pot.
Apply glue to one of the areas with a brush.
Sprinkle the surface with the selected cereal. Try to keep it completely filled.
Repeat these steps for all other areas.
Be sure to let the glue dry. The unique product is ready.

Plastic bottle pot

The ability to make original objects out of ordinary or unnecessary things is a whole art. Such methods are often used to create furniture, decorative ornaments. Creating a flowerpot is an opportunity to bring original ideas to life.

Modern craftsmen offer to create flower pots with their own hands from bottles. An ordinary plastic flask in talented hands can become a real masterpiece. The resulting flowerpot will be a wonderful interior decoration and your pride.

So, let's look at how to create flower pots from plastic bottles with your own hands.

Initially, you should stock up with the necessary tools and blanks. This is:

plastic bottle;
scissors;
disk;
glue.

Now you can get to work:

Cut the bottle in half with a sharp knife. The cut can be left straight. However, the top, decorated with a wavy line, will give originality to the flowerpot. An excellent solution would be to make flower “petals” from the upper edge. To do this, carefully mark the surface, make cuts and bend the resulting pieces.
Glue the bottle cap to the surface of the CD with a glue gun.
Paint the resulting design in the form of a glass with acrylic paint.

As you can see, it’s not at all difficult to create such flower pots from plastic bottles with your own hands.

Tin can - the basis of the flowerpot

Such material can be found in every home. You can use paint cans, cans. They make beautiful flower pots with their own hands. The photo allows you to get acquainted with interesting solutions.

Tall jars that used to contain pineapples or other fruits are excellent flowerpots. They must be removed from the labels, washed well and can be used for planting. The silvery surface will harmoniously fit into the interior, made in the style of minimalism, hi-tech.

If this decor does not suit your design, then the surface of the jars can be painted. And if you wish, you can depict any drawing on it.

Banks with low sides (after canned fish) can be used as follows:

Wash the container thoroughly and remove the label.
Put clothespins on the sides of the jar, combining them tightly.
The wooden surface can be varnished, painted with paints.

Board pot

Using corrugated or thick cardboard, you can create a wide variety of flowerpots. They can be round, elongated. You can make flower pots with your own hands in a diamond-shaped or square configuration.

The main thing is to decorate them stylishly. A small flowerpot can be decorated with small thin sticks. To do this, apply glue to the surface of the cardboard. Then start gluing the sticks together tightly.

Complete the decor with ribbons, pieces of burlap and other details chosen at your discretion. Such a flowerpot looks not only original, but also stylish.

A good solution is to use pencils instead of dry sticks. Such a flowerpot will become an indispensable attribute of a creative workshop.

mini potted garden

An amazing solution will allow you to create a small "landscape" design in a flowerpot. Such an original design of flower pots with your own hands will not leave anyone indifferent.

To create you will need:

large flowerpot;
clay for modeling;
wooden thin plank;
cardboard;
toothpick;
reel left after scotch tape;
wooden sticks;
toothpick.

Working process:

Draw the design of your mini-garden on a piece of paper.
Garden paths are made of clay. To give them bends, use a stencil made according to a sketch. With a toothpick, draw lines imitating tiled masonry.
For a bench, use a wooden plank. It is necessary to cut 4 boards from it (2 - for sitting, 2 - will be the back). The side parts are also made of clay.
For the well, use a reel. It must be decorated with planks. Glue two long sticks on the inside. Place a corner roof on them.
Wattle can be made from vines. Stick in a few twigs. Weave others between them. Make a small pot out of clay (you can use your little finger).
It remains to plant the original plants. And the mini-garden is ready.

The original "little men"

There are many different options for decorating the garden. You can come up with a variety of flowerpots. Having created flower pots with your own hands for the garden in the form of "little men", you will make a real highlight of your landscape.

To make a decor you will need:

flower pots (plastic) of various sizes;
wire;
gouache;
brushes for gouache;
coffee cups;
leg-split.

Now let's move on to creativity. A master class will greatly help those who decide to make flower pots with their own hands:

Choose the two largest flowerpots. Connect them with bases. Pull the wire through the holes and clamp it. This will be the head and torso of the future little man.
Plastic cups will become hands. They are attached to the body with a wire or glued.
To make the little man have legs, use twine or other twine. To do this, weave two pigtails.
On the sides of the pot, which serves as the body, make cuts with a knife. Woven legs are threaded through them.
Small plastic pots are put on pigtails. To do this, in such flowerpots, a hole is made in the middle. Flowerpot-man is ready.
Now it remains to connect your imagination and take up the brush. Draw the person's face and clothes.
After the gouache has dried, be sure to cover everything with varnish, otherwise the paints will leak.
The hair of the little man will be the plants planted in the upper pot.

Stylish decor

A good example that allows you to understand how to make flower pots with your own hands from improvised materials is the following masterpiece.

You will need:

containers (pots, small buckets);
glue;
packing tape;
kapron tights;
tassel;
silver paint.

Working process:

Degrease the surfaces of the containers. You can use dish detergent.
Open the future flowerpots with a layer of glue.
Wrap the first pot in random order with packing tape.
For design work on the second flowerpot, cut the tights into thin strips. Lay out a variety of patterns on the surface of the pot.
Be sure to let the pots dry. A flowerpot decorated with patterns (from tights) must be re-lubricated with glue.
After drying, sprinkle them with silver paint.

original ideas

If you look around carefully, dream up a little, then great solutions will come to your mind.

A few design ideas:

Old shoes can make great flowerpots. Rubber boots or slippers look original. This decor is used to decorate a summer house, a garden. In an apartment, it is not entirely appropriate.
Unusual flowerpots can be made from old bags. This decor will look great on the fence, creating an amazing atmosphere.
An unusual plant pot can be created from a teapot. Such a surface does not even need to be decorated. But if your soul strives for creativity, then after degreasing you can paint with acrylic paint. And then - embody your fantasies. Decorate with any items: beads, twine, buttons, shells, pebbles.
A flower pot can be made from an old vinyl record. When heated, it easily changes shape. Take advantage of this property to give exclusive lines to your flowerpot.

Conclusion

Making flower pots can be a real treat. After all, interesting, original and unique things will be born in your hands. They will give your apartment or garden individuality and spontaneity.

A variety of little things and crafts help to emphasize the features of the interior and significantly diversify it. DIY flower pots made from plastic bottles are a prime example of this. The presence of various indoor plants and flowers in the house makes it more comfortable. In addition, plants, in addition to their aesthetic appeal, also contribute to the production of oxygen, purify the air, refreshing the apartment. The decorative component, which is achieved by placing a variety of plants throughout the house, is also very important. One of the factors contributing to the development of an individual style is a flower pot. At the same time, those products that are made independently carry a special brilliance and brightness.

Beautiful flowers and concise indoor plants have excellent external characteristics. However, in most cases, such beauty is planted in faceless and angular pots bought in a store. Unfortunately, the modern market offers us not a very large selection of flower pots. The same products that are available do not differ in special decorative qualities, in addition, they are also not very good in terms of durability.

As a rule, similar products are made of plastic or they are based on ceramics. At the same time, their appearance is quite uniform and does not stand out with special colors. There are, of course, high-quality original products that are distinguished by decorative design and increased durability. But the disadvantage of such products is their high cost, and it is this factor that becomes decisive and makes you think about the appropriateness of the purchase.

Consumers have to either use the faded containers that the modern market provides us with, or experiment and make flower pots with their own hands. Why not try yourself as a creator? After all, this will not only allow you to get colorful and bright products, but also significantly save the family budget.

Making your own flower pots is not that difficult. The main criterion for their creation is the presence of creative abilities and the desire to bring their own fantasy to life. The resulting specimens will significantly stand out against the background of traditional products, outperforming them in almost all criteria - from the decorative component to the strength characteristics.

DIY flower pots made from plastic bottles can be considered one of the most striking examples of such work. It is they that make it possible to obtain wonderful colorful and practical products, as well as significantly save material resources.

Materials and stages of work

Plastic bottles are the raw material that can be found in every household. The modern food industry is focused on the use of plastic containers. Based on this, every month each of us receives at least one empty bottle. At the same time, making a flower pot out of it is a wonderful solution.

Hanging flower pot, created by hand, is a great product that can not only dilute the existing interior, but also give it a twist. Moreover, you can make such a sample in just a few minutes. So, to create such an interior item, you will need the following set of tools and materials:

plastic bottle 2 l;
rope, cable or fishing line;
scissors;
roulette;
knife or awl.

First, we take a plastic container and wash it well, since the remnants of the previous liquids can not only worsen the appearance of the decorative element, but also harm the plants that will be placed in it. After that, you need to tighten the cork tightly, put the bottle horizontally and, using scissors, cut a rectangular hole on its upper side into which the plant will be placed.

The next step in the manufacture of an improvised flower pot is the creation of a drainage system. It has a simple structure and consists of only a few holes that need to be made in the bottom of the bottle. To accomplish this task, you can use a knife or an awl. At the same time, the number and diameter of the holes should not violate the integrity of the container, so they are made at its different ends.

The suspended structure also has a simple device. It consists of a rope mechanism that fixes the bottle and prevents it from falling to the floor. To create it, you need to make several additional holes into which the rope will be threaded. At the same time, large knots must be tied at its lower ends - it is on them that the entire structure will be held.

The flower pot is ready. Now you can fill it with earth and plant plants. You can place such objects in any order both on the surface of the wall, and separately. Any of these options can significantly diversify almost any interior and refresh it a little.

Cache-pot from a plastic eggplant

Garden pots made from plastic bottles are able to update the design and make it more individual. However, there are other methods for decorating flower pots. One of them is the use of an impromptu planter designed to hide the appearance of not very attractive pots. Sometimes transplanting a growing flower into a new pot can be problematic or simply impossible. The way out of this situation is a planter, which can also be made from plastic containers. To create it, you will need the following set of tools and materials:

plastic bottle;
scissors;
roulette;
garden hose;

Making planters from plastic containers is a simple task that can be completed in a short period of time. The procedure for manufacturing such an object begins with the choice of the diameter of the bottle, which will serve as the basis for the planter. It should be based on the size of the plant itself, but, as a rule, it is enough to use a 5-liter eggplant to fully accommodate the flower. Therefore, we will take it as a basis. It is necessary to rinse the plastic container and carefully cut it. In this case, the size of the plant that will be placed in it should be taken into account. In most cases, 2/3 of the bottle is cut off, and the rest is used to make planters.

The difference between such a product and an ordinary pot is that it does not have drainage holes. Therefore, the plastic base itself is ideal for creating planters. However, when cutting plastic, its edge comes out too sharp and not very beautiful. To give it an external aesthetics, you can use an ordinary garden hose, which will hide all the bumps.

The plastic base itself is not very colorful. However, it is easy to process and decorate. To create brightness and visual appeal, you can use paints and paint the surface of the pots as you wish.

Using plastic bottles to create flower pots is an excellent solution that allows you not only to significantly save material resources, but also to get bright and colorful products that will stand out against the background of faceless and angular factory ones.

With the help of this simple step-by-step instruction, in just 10-15 minutes you can make a charming flower pot from a plastic bottle with your own hands. We will tell you how to turn an ordinary and already exhausted bottle into a cute little cat. The craft is so simple and clear that even small children can handle it.

Such a flower pot will fit well in both country and home interiors. If you have children, let the flower in the "cat" stand in the child's room, especially if he makes this pot with his own hands. True, in the process of creating crafts, you must strictly follow safety precautions: cut the bottles yourself, do not trust the child, and you need to paint them with rubber gloves, preferably with a gauze bandage to cover the airways (on adults, fresh acrylic paints are almost completely do not affect).

What will we need?

clear plastic bottles
acrylic paints (can be in a spray can)
permanent marker
craft varnish (non-toxic)
priming
plant

Plastic bottles don't have to be big. If, for example, you decide to plant a cactus in a pot, you can even take a 0.5 liter bottle. For large flowers, bottles from 2 liters are more suitable.

How to make a pot?

We cut the bottles so as to form two cat ears in front and a tail in the back. If the edges are too sharp, they can be carefully melted with a candle or lighter. Hold the bottle at a distance of 2-3 cm from the fire, turning it to him with the edge. Take precautions!

We paint future flower pots both from the outside and from the inside. Acrylic lays flat on plastic, so there should be no problems. Since we paint on the inside too, the craft will not turn out pale - you do not need to apply an additional layer. If you have spray paints, use them, the scheme will be the same.

We draw eyes and ears on the bottle using a permanent marker. If you don't have one, take a different color of acrylic paint and a thin brush.

Leave the cats to dry for a day. If desired, you can cover the flower pot with a non-toxic water-repellent varnish (if your acrylic is already water-repellent, this is not necessary).

It remains to pour the soil (this is an important point, since we need to make the plastic pots stable). Then you can add earth or plant a flower directly into the ground - it depends on the plant itself, on its needs.

Categories

Popular